For others having issues with VM network routing...
virbr0 is usually installed by default on centos, etc. to facilitate
containers networking via NAT.
If I'm not planning on running any containers I usually yum remove the
associated packages,
and a reboot to make sure networking is OK.
Sometimes the ipv4 autoconfig stuff also gets in the way of desired routing,
and I add NOZEROCONF=yes to /etc/sysconfig/network to disable it.
When I've seen the !X in traceroutes it has usually been a firewall config
issue on the remote host I'm tracing to.
On Mon, Sep 14, 2020 at 11:50 AM Valerio Luccio <valerio.luccio(a)nyu.edu>
wrote:
Thanks to all that gave me hints/suggestions, especially to Edward
that
pointed me to the right setup page.
I was able to set up correctly my internal switch network, but I'm still
having issues with the virtual network that connects to the university
backbone. The route on the VM is setup just like on the host and the
engine. I also tested traceroute and found out something puzzling:
1. traceroute on the host and the engine for any node on the
university network returns the answer in milliseconds.
2. traceroute on the VM for a node on my internal switch returns the
answer in milliseconds with the flag.
3. traceroute on the VM for the host or the engine returns answer
after more than 10 seconds with the flag !X
4. traceroute on the VM for other hosts on the network returns the
flag !H (host not reachable).
According to the traceroute man pages the !X flag indicates "communication
administratively prohibited". I temporarily turned off the firewall on the
host and the engine and that removed the !X flag from 3, but did not speed
it up and did not solve 4.
Anyone have any clue what I should try next ?
Thanks in advance,
--
As a result of Coronavirus-related precautions, NYU and the Center for
Brain Imaging operations will be managed remotely until further notice.
All telephone calls and e-mail correspondence are being monitored remotely
during our normal business hours of 9am-5pm, Monday through Friday.
For MRI scanner-related emergency, please contact: Keith Sanzenbach at
keith.sanzenbach(a)nyu.edu and/or Pablo Velasco at pablo.velasco(a)nyu.edu
For computer/hardware/software emergency, please contact: Valerio Luccio
at valerio.luccio(a)nyu.edu
For TMS/EEG-related emergency, please contact: Chrysa Papadaniil at
chrysa(a)nyu.edu
For CBI-related administrative emergency, please contact: Jennifer Mangan
at jennifer.mangan(a)nyu.edu
Valerio Luccio (212) 998-8736
Center for Brain Imaging 4 Washington Place, Room 158
New York University New York, NY 10003
"In an open world, who needs windows or gates ?"
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement:
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives: