Hi, first of all welcome to the oVirt project. Did you configure vlan tagging for your ovirtmgmt network? If you're using vlan tagging on (bonded) interfaces in oVirt you have to add a vlan tag to all logical networks - can't mix tagged and untagged logical networks. e.g (same for bonds as well): Name - VLAN - Network Name eth0 - eth0.10 - ovirtmgmt eth0.11 - lan1 eth0.12 - lan2 Hope this helps. -- Best Regards René Koch Senior Solution Architect ============================================ ovido gmbh - "Das Linux Systemhaus" Brünner Straße 163, A-1210 Wien Phone: +43 720 / 530 670 Mobile: +43 660 / 512 21 31 E-Mail: r.koch@ovido.at ============================================ On Wed, 2013-05-08 at 11:18 -0300, Juan Pablo Lorier wrote:
Hi,
I'm new to ovirt and I'm dealing with network configuration. I have a host with a bonding of 4 eths and on top of that I added ovirtmgmt interface. I now want my vm to work on vlan 128 so I added the nic to ovirtmgmt bridge. I have access to vlan 1 (the bridge to the bond) but even if I add the vlan interface into the vm, I have no network traffic on vlan 128. I've created a new network in the cluster for vlan 128 but the web UI is not allowing me to add it on top of oviftmgmt (which I can do manually in the host but then I can't add it to the vm as a new nic because it only shows the ovirtmgmt interface). Is there a way to do this by cli? Regards, _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users