On Sun, 2012-10-14 at 12:07 -0400, Simon Grinberg wrote: > > ----- Original Message ----- > > From: "Simon Grinberg" <simon(a)redhat.com&gt; > > To: "Mike Burns" <mburns(a)redhat.com&gt; > > Cc: "node-devel" <node-devel(a)ovirt.org&gt; > > Sent: Sunday, October 14, 2012 5:10:40 PM > > Subject: Re: [Users] oVirt Node 2.5.2 ISO released > > > > Hi Mike, > > > > I was trying to install it and when setting from the TUI I get an > > error message command "hostname" not found. > > Dropping into shell I get the same. /etc/sysconfig/network is getting > > the proper value, but after reboot this is not reflected in the host > > name (though the value in /etc/sysconfig/network is persisted) > > OK, I managed to workaround this by directly changing the host name: > echo <new host name> > /proc/sys/kernel/hostname > > This allowed me to register the node with the engine (before that it complained on missing proper certificates) > The change does not sustain reboot, but it seems that the connection with VDSM does. > > I guess the next time point I'll be hit by this issue is live migration, but not sure about that (I don't remember if libvirt still validates the host name before migration). > An iso was posted last week to address this issue, but it looks like our auto-cleaner wiped it. I'll be posting another build tomorrow with both this and the sanlock selinux issue solved. Mike

> > > > Any idea? > > > > Thanks, > > Simon. > > > > ----- Original Message ----- > > > From: "Mike Burns" <mburns(a)redhat.com&gt; > > > To: "node-devel" <node-devel(a)ovirt.org&gt;, "users" <users(a)ovirt.org&gt; > > > Sent: Friday, October 5, 2012 6:23:11 PM > > > Subject: [Users] oVirt Node 2.5.2 ISO released > > > > > > The long awaited and much anticipated oVirt Node 2.5.2 ISO is now > > > available on ovirt.org. This build includes the fixed vdsm to > > > allow > > > nfs > > > based domains to be attached. > > > > > > Thanks for the patience while we worked out the issue with NFS. > > > > > > The oVirt Node Team > > > > > > http://ovirt.org/releases/3.1/tools/ovirt-node-iso-2.5.2-0.1.fc17.iso > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ node-devel mailing list node-devel(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel

From: "Simon Grinberg" <simon(a)redhat.com&gt; To: "Mike Burns" <mburns(a)redhat.com&gt; Cc: "engine-devel" <engine-devel(a)ovirt.org&gt;, "node-devel" <node-devel(a)ovirt.org&gt; Sent: Monday, October 15, 2012 6:19:52 PM Subject: Re: [Engine-devel] [node-devel] [Users] oVirt Node 2.5.2 ISO released ----- Original Message ----- > From: "Mike Burns" <mburns(a)redhat.com&gt; > To: "Simon Grinberg" <simon(a)redhat.com&gt; > Cc: "engine-devel" <engine-devel(a)ovirt.org&gt;, "node-devel" > <node-devel(a)ovirt.org&gt; > Sent: Monday, October 15, 2012 2:36:08 PM > Subject: Re: [Engine-devel] [node-devel] [Users] oVirt Node 2.5.2 > ISO released > > On Sun, 2012-10-14 at 21:59 -0400, Mike Burns wrote: > > On Sun, 2012-10-14 at 12:07 -0400, Simon Grinberg wrote: > > > > > > ----- Original Message ----- > > > > From: "Simon Grinberg" <simon(a)redhat.com&gt; > > > > To: "Mike Burns" <mburns(a)redhat.com&gt; > > > > Cc: "node-devel" <node-devel(a)ovirt.org&gt; > > > > Sent: Sunday, October 14, 2012 5:10:40 PM > > > > Subject: Re: [Users] oVirt Node 2.5.2 ISO released > > > > > > > > Hi Mike, > > > > > > > > I was trying to install it and when setting from the TUI I > > > > get > > > > an > > > > error message command "hostname" not found. > > > > Dropping into shell I get the same. /etc/sysconfig/network is > > > > getting > > > > the proper value, but after reboot this is not reflected in > > > > the > > > > host > > > > name (though the value in /etc/sysconfig/network is > > > > persisted) > > > > > > OK, I managed to workaround this by directly changing the host > > > name: > > > echo <new host name> > /proc/sys/kernel/hostname > > > > > > This allowed me to register the node with the engine (before > > > that > > > it complained on missing proper certificates) > > > The change does not sustain reboot, but it seems that the > > > connection with VDSM does. > > > > > > I guess the next time point I'll be hit by this issue is live > > > migration, but not sure about that (I don't remember if libvirt > > > still validates the host name before migration). > > > > > > > An iso was posted last week to address this issue, but it looks > > like our > > auto-cleaner wiped it. I'll be posting another build tomorrow > > with > > both > > this and the sanlock selinux issue solved. > > > > Mike > > A new 2.5.4 image is available now to address this and the sanlock > selinux issue. Now the host name works fine so no need for tricks to allow it to be registered. But NFS mount fails (even before the sanlock issue. Works well with Fedora hosts though. The massage says: MountError, (32, ';mount.nfs: No such device\n') Tried to do mount from the shell and got the same while this works from the Fedora host. Ideas?

In another note: Yapee I have a functional, VMs based, all in one setup on my laptop using nested virt, just would like it to work with the node as well. > > Mike > > > > > > > > > > > > > Any idea? > > > > > > > > Thanks, > > > > Simon. > > > > > > > > ----- Original Message ----- > > > > > From: "Mike Burns" <mburns(a)redhat.com&gt; > > > > > To: "node-devel" <node-devel(a)ovirt.org&gt;, "users" > > > > > <users(a)ovirt.org&gt; > > > > > Sent: Friday, October 5, 2012 6:23:11 PM > > > > > Subject: [Users] oVirt Node 2.5.2 ISO released > > > > > > > > > > The long awaited and much anticipated oVirt Node 2.5.2 ISO > > > > > is > > > > > now > > > > > available on ovirt.org. This build includes the fixed vdsm > > > > > to > > > > > allow > > > > > nfs > > > > > based domains to be attached. > > > > > > > > > > Thanks for the patience while we worked out the issue with > > > > > NFS. > > > > > > > > > > The oVirt Node Team > > > > > > > > > > http://ovirt.org/releases/3.1/tools/ovirt-node-iso-2.5.2-0.1.fc17.iso > > > > > > > > > > > > > > > _______________________________________________ > > > > > Users mailing list > > > > > Users(a)ovirt.org > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > > > > _______________________________________________ > > node-devel mailing list > > node-devel(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/node-devel > > > _______________________________________________ > Engine-devel mailing list > Engine-devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/engine-devel >

From: "Mike Burns" <mburns(a)redhat.com&gt; To: "Simon Grinberg" <simon(a)redhat.com&gt; Cc: "engine-devel" <engine-devel(a)ovirt.org&gt;, "node-devel" <node-devel(a)ovirt.org&gt; Sent: Thursday, October 18, 2012 12:20:48 AM Subject: Re: [Engine-devel] [node-devel] [Users] oVirt Node 2.5.2 ISO released <snip> > > Same goes for ovirt-node-iso-2.5.5-0.1.fc17. > It does have same vdsm as my Fedora based host so it's not VDSM. > > Error code send to GUI is cryptic as well: > 2012-Oct-16, 14:00:01 > > The error code for connection engine.mylaptop.redhat.com:/home/iso > returned by VDSM was following 477 > > 2012-Oct-16, 14:00:01 > > The error code for connection > engine.mylaptop.redhat.com:/home/data2 returned by VDSM was > following 477 Can you try the 2.5.5-0.1.fc17 build here[1]. The previous build didn't pick up the changes correctly, so I respun it. Thanks

Mike [1] http://ovirt.org/releases/nightly/iso/ovirt-node-iso-2.5.5-0.1.fc17.iso > > <snip> _______________________________________________ Engine-devel mailing list Engine-devel(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel