Error: Adding new Host to ovirt-engine
by Ahmad Khiet
Hi,
Can't add new host to ovirt engine, because the following error:
2019-06-12 12:23:09,664 p=4134 u=engine | TASK [ovirt-host-deploy-facts :
Set facts] *************************************
2019-06-12 12:23:09,684 p=4134 u=engine | ok: [10.35.1.17] => {
"ansible_facts": {
"ansible_python_interpreter": "/usr/bin/python2",
"host_deploy_vdsm_version": "4.40.0"
},
"changed": false
}
2019-06-12 12:23:09,697 p=4134 u=engine | TASK [ovirt-provider-ovn-driver
: Install ovs] *********************************
2019-06-12 12:23:09,726 p=4134 u=engine | fatal: [10.35.1.17]: FAILED! =>
{}
MSG:
The conditional check 'cluster_switch == "ovs" or (ovn_central is defined
and ovn_central | ipaddr and ovn_engine_cluster_version is
version_compare('4.2', '>='))' failed. The error was: The ipaddr filter
requires python's netaddr be installed on the ansible controller
The error appears to be in
'/home/engine/apps/engine/share/ovirt-engine/playbooks/roles/ovirt-provider-ovn-driver/tasks/configure.yml':
line 3, column 5, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- block:
- name: Install ovs
^ here
2019-06-12 12:23:09,728 p=4134 u=engine | PLAY RECAP
*********************************************************************
2019-06-12 12:23:09,728 p=4134 u=engine | 10.35.1.17 :
ok=3 changed=0 unreachable=0 failed=1 skipped=0 rescued=0
ignored=0
whats missing!?
Thanks
--
Ahmad Khiet
Red Hat <https://www.redhat.com/>
akhiet(a)redhat.com
M: +972-54-6225629
<https://red.ht/sig>
1 month, 1 week
Error Java SDK Issue??
by Geschwentner, Patrick
Dear Ladies and Gentlemen!
I am currently working with the java-sdk and I encountered a problem.
If I would like to retrieve the disk details, I get the following error:
Disk currDisk = ovirtConnection.followLink(diskAttachment.disk());
The Error is occurring in this line:
[cid:image001.png@01D44537.AF127FD0]
The getResponst looks quiet ok. (I inspected: [cid:image002.png@01D44537.AF127FD0] and it looks ok).
Error:
wrong number of arguments
The code is quiet similar to what you published on github (https://github.com/oVirt/ovirt-engine-sdk-java/blob/master/sdk/src/test/j... ).
Can you confirm the defect?
Best regards
Patrick
2 years, 5 months
Relaunching the website migration project
by Marc Dequènes (Duck)
Quack,
### A pinch of history
As a short introduction for those who do not know me as I rarely post
here: I'm part of Red Hat OSPO Comminfra Team (previously OSPO was
called OSAS) and currently hosting and taking care of the website.
This topic has been discussed many times: neither people writing the
site neither us for the maintenance are happy with the current state of
affair. But we had not real plan and picking a random tool which might
lead to similar problems and without any way to support it properly was
not very appealing. Moreover we tried migrating to Middleman 4, the
obvious path to modernization, but this happened to be more complicated
than expected and this new version had terrible performance problems. As
you now version 3 is already slow, and that's quite an understatement.
In the meanwhile a few things have changed, and people taking care of
the website too, so let's talk about the current situation.
(very short version of the history around this)
### Why now?
What has changed:
* several projects moved to Jekyll, a software we were already
investigating at the time and is being used by Google Pages (they
created it in fact), and they were very happy with the result; we
believe it has the necessary features, it is well maintained because
Google uses it heavily, and it's very fast
* we've tried Jekyll ourselves, we're happy too, and we do have the
Ansible playbooks and tooling to deploy it now
* over time the website had some waves of cleanup (still needs quite
some love though) and recently the blog moved to WordPress to get
comment support and a more friendly interface (see OVIRT-2652) which
allowed more cleanup (see #2030)
With the blog separated and a lot of custom Ruby code removed, the
tooling ready, I believe we can now work on migrating the content.
We may realize Jekyll is not the right tool, but people seemed to like
the idea at the time and current experience seem to indicate it should
improve things and be maintainable. The goal here is to experiment and
switch to production only if we're happy with it.
### Early work
I have started a branch called 'jekyll_migration' to put my work on it.
This is very early work (I just started), I already hit various
difficulties, and I can't commit 100% of my time on it so it will
require some time.
Several of my changes happened to not be really specific to the
migration, and the current site would benefit from these
fixes/cleanups/simplifications… thus I'll extracts these changes and
create separate PRs for master.
If you wish to help, then you can contact me directly or reply to this
thread. You may also create PRs to this topic branch, but please do not
push anything directly.
Regards.
\_o<
4 years, 1 month
OST's basic suite UI sanity tests optimization
by Marcin Sobczyk
Hi,
_TL; DR_ Let's cut the running time of '008_basic_ui_sanity.py' by more
than 3 minutes by sacrificing Firefox and Chrome screenshots in favor of
Chromium.
During the OST hackathon in Brno this year, I saw an opportunity to
optimize basic UI sanity tests from basic suite.
The way we currently run them, is by setting up a Selenium grid using 3
docker containers, with a dedicated network... that's insanity! (pun
intended).
Let's a look at the running time of '008_basic_ui_sanity.py' scenario
(https://jenkins.ovirt.org/view/oVirt%20system%20tests/job/ovirt-system-te...):
01:31:50 @ Run test: 008_basic_ui_sanity.py:
01:31:50 nose.config: INFO: Ignoring files matching ['^\\.', '^_',
'^setup\\.py$']
01:31:50 # init:
01:31:50 # init: Success (in 0:00:00)
01:31:50 # start_grid:
01:34:05 # start_grid: Success (in 0:02:15)
01:34:05 # initialize_chrome:
01:34:18 # initialize_chrome: Success (in 0:00:13)
01:34:18 # login:
01:34:27 # login: Success (in 0:00:08)
01:34:27 # left_nav:
01:34:45 # left_nav: Success (in 0:00:18)
01:34:45 # close_driver:
01:34:46 # close_driver: Success (in 0:00:00)
01:34:46 # initialize_firefox:
01:35:02 # initialize_firefox: Success (in 0:00:16)
01:35:02 # login:
01:35:11 # login: Success (in 0:00:08)
01:35:11 # left_nav:
01:35:29 # left_nav: Success (in 0:00:18)
01:35:29 # cleanup:
01:35:36 # cleanup: Success (in 0:00:06)
01:35:36 # Results located at
/dev/shm/ost/deployment-basic-suite-master/008_basic_ui_sanity.py.junit.xml
01:35:36 @ Run test: 008_basic_ui_sanity.py: Success (in 0:03:45)
Starting the Selenium grid takes 2:15 out of 3:35 of total running time!
I've investigated a lot of approaches and came up with something like this:
* install 'chromium-headless' package on engine VM
* download 'chromedriver' and 'selenium hub' jar and deploy them in
'/var/opt/' on engine's VM
* run 'selenium.jar' on engine VM from '008_basic_ui_sanity.py' by
using Lago's ssh
* connect to the Selenium instance running on the engine in
'008_basic_ui_sanity.py'
* make screenshots
This series of patches represent the changes:
https://gerrit.ovirt.org/#/q/topic:selenium-on-engine+(status:open+OR+sta....
This is the new running time (https://jenkins.ovirt.org/view/oVirt
system tests/job/ovirt-system-tests_manual/4195/):
20:13:26 @ Run test: 008_basic_ui_sanity.py:
20:13:26 nose.config: INFO: Ignoring files matching ['^\\.', '^_',
'^setup\\.py$']
20:13:26 # init:
20:13:26 # init: Success (in 0:00:00)
20:13:26 # make_screenshots:
20:13:27 * Retrying (Retry(total=2, connect=None, read=None,
redirect=None, status=None)) after connection broken by
'NewConnectionError('<urllib3.connection.HTTPConnection object at
0x7fdb6004f8d0>: Failed to establish a new connection: [Errno 111]
Connection refused',)': /wd/hub
20:13:27 * Retrying (Retry(total=1, connect=None, read=None,
redirect=None, status=None)) after connection broken by
'NewConnectionError('<urllib3.connection.HTTPConnection object at
0x7fdb6004fa10>: Failed to establish a new connection: [Errno 111]
Connection refused',)': /wd/hub
20:13:27 * Retrying (Retry(total=0, connect=None, read=None,
redirect=None, status=None)) after connection broken by
'NewConnectionError('<urllib3.connection.HTTPConnection object at
0x7fdb6004fb50>: Failed to establish a new connection: [Errno 111]
Connection refused',)': /wd/hub
20:13:28 * Redirecting http://192.168.201.4:4444/wd/hub ->
http://192.168.201.4:4444/wd/hub/static/resource/hub.html
20:14:02 # make_screenshots: Success (in 0:00:35)
20:14:02 # Results located at
/dev/shm/ost/deployment-basic-suite-master/008_basic_ui_sanity.py.junit.xml
20:14:02 @ Run test: 008_basic_ui_sanity.py: Success (in 0:00:35)
(The 'NewConnectionErrors' is waiting for Selenium hub to be up and
running, I can silence these later).
And the screenshots are here:
https://jenkins.ovirt.org/view/oVirt%20system%20tests/job/ovirt-system-te...
_The pros:_
* we cut the running time by more than 3 minutes
_The cons:_
* we don't get Firefox or Chrome screenshots - we get Chromium
screenshots (although AFAIK, QE has much more Selenium tests which
cover both Firefox and Chrome)
* we polute the engine VM with 'chromium-headless' package and deps
(in total: 'chromium-headless', 'chromium-common', 'flac-libs' and
'minizip'), although we can remove these after the tests
_Some design choices explained:_
Q: Why engine VM?
A: Because the engine VM already has 'X11' libs. We could install
'chromium-headless' (and even other browsers) on our Jenkins executors,
but that would mess them up a lot.
Q: Why Chromium?
A: Because it has a separate 'headless' package.
Q: Why not use 'chromedriver' RPM in favor of
https://chromedriver.storage.googleapis.com Chromedriver builds?
A: Because the RPM version pulls a lot of extra dependencies even on the
engine VM ('gtk3', 'cairo' etc.). Builds from the URL are the offical
Google Chromedriver builds, they contain a single binary, and they work
for us.
_What still needs to be polished with the patches:_
* Currently 'setup_engine_selenium.sh' script downloads each time
'selenium.jar' and 'chromedriver.zip' (even with these downloads we
get much faster set-up times) - we should bake these into the engine
VM image template.
* 'selenium_hub_running' function in 'selenium_on_engine.py' is
hackish - an ability to run an ssh command with a context manager
(and auto-terminate on it exits) should be part of Lago. Can be
refactored.
Questions, comments, reviews are welcome.
Regards, Marcin
4 years, 1 month
Re: Vdsm NFS on RHEL 8
by Amit Bawer
Per +Milan Zamazal <mzamazal(a)redhat.com> comment, adding +devel
<devel(a)ovirt.org>
On Wed, Jul 24, 2019 at 11:32 AM Michal Skrivanek <
michal.skrivanek(a)redhat.com> wrote:
>
>
> On 24 Jul 2019, at 10:24, Amit Bawer <abawer(a)redhat.com> wrote:
>
> Thanks, applied the fixed patch.
>
> No I am punished for choosing not to work with SSL/TLS in Vdsm when trying
> to "Run" VM.
> - Any known workaround for this?
>
>
> That’s part of the ongoing fixes, please don’t discuss this privately,
> this belongs to devel@ list.
> Many people are struggling with the same issues while they’re working on
> their areas, and we need complete visibility
>
>
> 24 04:04:54,610-0400 INFO (vm/01de706d) [virt.vm]
> (vmId='01de706d-ee4c-484f-a17f-6b3355adf047') <?xml version='1.0'
> encoding='utf-8'?>
> <domain xmlns:ns0="http://ovirt.org/vm/tune/1.0" xmlns:ovirt-vm="
> http://ovirt.org/vm/1.0" type="kvm">
> <name>vm1</name>
> <uuid>01de706d-ee4c-484f-a17f-6b3355adf047</uuid>
> <memory>1048576</memory>
> <currentMemory>1048576</currentMemory>
> <iothreads>1</iothreads>
> <maxMemory slots="16">4194304</maxMemory>
> <vcpu current="1">16</vcpu>
> <sysinfo type="smbios">
> <system>
> <entry name="manufacturer">oVirt</entry>
> <entry name="product">RHEL</entry>
> <entry name="version">8.0-0.44.el8</entry>
> <entry
> name="serial">e5825ba8-473e-4821-829a-bc6dbbe79617</entry>
> <entry name="uuid">01de706d-ee4c-484f-a17f-6b3355adf047</entry>
> </system>
> </sysinfo>
> <clock adjustment="0" offset="variable">
> <timer name="rtc" tickpolicy="catchup" />
> <timer name="pit" tickpolicy="delay" />
> <timer name="hpet" present="no" />
> </clock>
> <features>
> <acpi />
> </features>
> <cpu match="exact">
> <model>SandyBridge</model>
> <topology cores="1" sockets="16" threads="1" />
> <numa>
> <cell cpus="0-15" id="0" memory="1048576" />
> </numa>
> </cpu>
> <cputune />
> <devices>
> <input bus="usb" type="tablet" />
> <channel type="unix">
> <target name="ovirt-guest-agent.0" type="virtio" />
> <source mode="bind"
> path="/var/lib/libvirt/qemu/channels/01de706d-ee4c-484f-a17f-6b3355adf047.ovirt-guest-agent.0"
> />
> </channel>
> <channel type="unix">
> <target name="org.qemu.guest_agent.0" type="virtio" />
> <source mode="bind"
> path="/var/lib/libvirt/qemu/channels/01de706d-ee4c-484f-a17f-6b3355adf047.org.qemu.guest_agent.0"
> />
> </channel>
> <rng model="virtio">
> <backend model="random">/dev/urandom</backend>
> <alias name="ua-117e932d-e465-40d6-9005-bf7d7eb22023" />
> </rng>
> <graphics autoport="yes" passwd="*****"
> passwdValidTo="1970-01-01T00:00:01" port="-1" tlsPort="-1" type="spice">
> <channel mode="secure" name="main" />
> <channel mode="secure" name="inputs" />
> <channel mode="secure" name="cursor" />
> <channel mode="secure" name="playback" />
> <channel mode="secure" name="record" />
> <channel mode="secure" name="display" />
> <channel mode="secure" name="smartcard" />
> <channel mode="secure" name="usbredir" />
> <listen network="vdsm-ovirtmgmt" type="network" />
> </graphics>
> <controller index="0" model="piix3-uhci" type="usb" />
> <controller index="0" model="virtio-scsi" type="scsi">
> <driver iothread="1" />
> <alias name="ua-73437643-3c01-4763-b8ef-c4275527606b" />
> </controller>
> <graphics autoport="yes" keymap="en-us" passwd="*****"
> passwdValidTo="1970-01-01T00:00:01" port="-1" type="vnc">
> <listen network="vdsm-ovirtmgmt" type="network" />
> </graphics>
> <memballoon model="virtio">
> <stats period="5" />
> <alias name="ua-93d69b50-e010-4879-80db-713ee4a11727" />
> </memballoon>
> <controller index="0" ports="16" type="virtio-serial">
> <alias name="ua-cd3edc3f-25c5-4fef-b555-cedf45c86adc" />
> </controller>
> <video>
> <model heads="1" ram="65536" type="qxl" vgamem="16384"
> vram="8192" />
> <alias name="ua-d660095f-dfe6-4f2c-aa76-c3525fb6244e" />
> </video>
> <channel type="spicevmc">
> <target name="com.redhat.spice.0" type="virtio" />
> </channel>
> <disk device="cdrom" snapshot="no" type="file">
> <driver error_policy="report" name="qemu" type="raw" />
> <source file="" startupPolicy="optional">
> <seclabel model="dac" relabel="no" type="none" />
> </source>
> <target bus="ide" dev="hdc" />
> <readonly />
> <alias name="ua-917aea8a-bc4b-4d15-8580-a0c442e925ee" />
> </disk>
> <disk device="disk" snapshot="no" type="file">
> <target bus="scsi" dev="sda" />
> <source file="/rhev/data-center/mnt/10.35.1.6:
> _exports_data/f49de997-9fb7-4ef8-82bd-f5b97ba31fb0/images/7dee6442-1838-48dd-892a-86fb96a85737/da070fc0-4af5-406e-bf2b-2cf4d89eb276">
> <seclabel model="dac" relabel="no" type="none" />
> </source>
> <driver cache="none" error_policy="stop" io="threads"
> name="qemu" type="raw" />
> <alias name="ua-7dee6442-1838-48dd-892a-86fb96a85737" />
> <address bus="0" controller="0" target="0" type="drive"
> unit="0" />
> <boot order="1" />
> <serial>7dee6442-1838-48dd-892a-86fb96a85737</serial>
> </disk>
> </devices>
> <pm>
> <suspend-to-disk enabled="no" />
> <suspend-to-mem enabled="no" />
> </pm>
> <os>
> <type arch="x86_64" machine="pc-i440fx-rhel7.6.0">hvm</type>
> <smbios mode="sysinfo" />
> </os>
> <metadata>
> <ns0:qos />
> <ovirt-vm:vm>
> <ovirt-vm:minGuaranteedMemoryMb
> type="int">1024</ovirt-vm:minGuaranteedMemoryMb>
> <ovirt-vm:clusterVersion>4.4</ovirt-vm:clusterVersion>
> <ovirt-vm:custom />
> <ovirt-vm:device devtype="disk" name="sda">
>
> <ovirt-vm:poolID>dab8cf3a-a969-11e9-84eb-080027624b78</ovirt-vm:poolID>
>
> <ovirt-vm:volumeID>da070fc0-4af5-406e-bf2b-2cf4d89eb276</ovirt-vm:volumeID>
>
> <ovirt-vm:imageID>7dee6442-1838-48dd-892a-86fb96a85737</ovirt-vm:imageID>
>
> <ovirt-vm:domainID>f49de997-9fb7-4ef8-82bd-f5b97ba31fb0</ovirt-vm:domainID>
> </ovirt-vm:device>
> <ovirt-vm:launchPaused>false</ovirt-vm:launchPaused>
> <ovirt-vm:resumeBehavior>auto_resume</ovirt-vm:resumeBehavior>
> </ovirt-vm:vm>
> </metadata>
> </domain>
> (vm:2570)
> 2019-07-24 04:04:55,348-0400 ERROR (vm/01de706d) [virt.vm]
> (vmId='01de706d-ee4c-484f-a17f-6b3355adf047') The vm start process failed
> (vm:841)
> Traceback (most recent call last):
> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 775, in
> _startUnderlyingVm
> self._run()
> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 2575, in
> _run
> dom.createWithFlags(flags)
> File
> "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line
> 131, in wrapper
> ret = f(*args, **kwargs)
> File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line
> 94, in wrapper
> return func(inst, *args, **kwargs)
> File "/usr/lib64/python3.6/site-packages/libvirt.py", line 1110, in
> createWithFlags
> if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed',
> dom=self)
> libvirt.libvirtError: unsupported configuration: Auto allocation of spice
> TLS port requested but spice TLS is disabled in qemu.conf
> 2019-07-24 04:04:55,348-0400 INFO (vm/01de706d) [virt.vm]
> (vmId='01de706d-ee4c-484f-a17f-6b3355adf047') Changed state to Down:
> unsupported configuration: Auto allocation of spice TLS port requested but
> spice TLS is disabled in qemu.conf (code=1) (vm:1595)
> 2019-07-24 04:04:55,525-0400 INFO (vm/01de706d) [virt.vm]
> (vmId='01de706d-ee4c-484f-a17f-6b3355adf047') Stopping connection
> (guestagent:455)
> 2019-07-24 04:04:55,525-0400 DEBUG (vm/01de706d) [jsonrpc.Notification]
> Sending event {"jsonrpc": "2.0", "method":
> "|virt|VM_status|01de706d-ee4c-484f-a17f-6b3355adf047", "params":
> {"01de706d-ee4c-484f-a17f-6b3355adf047": {"status": "Down", "vmId":
> "01de706d-ee4c-484f-a17f-6b3355adf047", "exitCode": 1, "exitMessage":
> "unsupported configuration: Auto allocation of spice TLS port requested but
> spice TLS is disabled in qemu.conf", "exitReason": 1}, "notify_time":
> 4440824940}} (__init__:181)
>
> On Tue, Jul 23, 2019 at 6:14 PM Milan Zamazal <mzamazal(a)redhat.com> wrote:
>
>> Amit Bawer <abawer(a)redhat.com> writes:
>>
>> > Ok, applied the given patch. Now I have following error trace in
>> vdsm.log
>> > when trying to "Run" the VM:
>> >
>> > 2019-07-23 09:57:55,167-0400 ERROR (vm/01de706d) [virt.vm]
>> > (vmId='01de706d-ee4c-484f-a17f-6b3355adf047') Failed to setup device
>> spice
>> > (vm:2344)
>> > Traceback (most recent call last):
>> > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 2341, in
>> > _setup_devices
>> > dev_object.setup()
>> > File
>> "/usr/lib/python3.6/site-packages/vdsm/virt/vmdevices/graphics.py",
>> > line 95, in setup
>> > displaynetwork.create_network(display_network, self.vmid)
>> > File "/usr/lib/python3.6/site-packages/vdsm/virt/displaynetwork.py",
>> line
>> > 29, in create_network
>> > libvirtnetwork.create_network(netname, display_device,
>> user_reference)
>> > File "/usr/lib/python3.6/site-packages/vdsm/virt/libvirtnetwork.py",
>> line
>> > 91, in create_network
>> > _createNetwork(createNetworkDef(netname, bridged, iface))
>> > File "/usr/lib/python3.6/site-packages/vdsm/virt/libvirtnetwork.py",
>> line
>> > 108, in _createNetwork
>> > net = conn.networkDefineXML(netXml)
>> > File
>> "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py",
>> > line 131, in wrapper
>> > ret = f(*args, **kwargs)
>> > File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line
>> 94,
>> > in wrapper
>> > return func(inst, *args, **kwargs)
>> > File "/usr/lib64/python3.6/site-packages/libvirt.py", line 4235, in
>> > networkDefineXML
>> > ret = libvirtmod.virNetworkDefineXML(self._o, xml)
>> > TypeError: virNetworkDefineXML() argument 2 must be str or None, not
>> bytes
>>
>> I believe https://gerrit.ovirt.org/102136 (untested) should fix it.
>>
>> > On Tue, Jul 23, 2019 at 3:56 PM Milan Zamazal <mzamazal(a)redhat.com>
>> wrote:
>> >
>> >> Amit Bawer <abawer(a)redhat.com> writes:
>> >>
>> >> > Hi Milan,
>> >> >
>> >> > I am trying to run VM on a RHEL8 host attached NFS domain.
>> >> > I get the following error in vdsm.log
>> >> > Do you happen to know what it means?
>> >>
>> >> Probably yes, does https://gerrit.ovirt.org/102127 (untested) fix it?
>> >>
>> >> > Thanks,
>> >> > Amit
>> >> >
>> >> > Traceback (most recent call last):
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line
>> 124,
>> >> in
>> >> > method
>> >> > ret = func(*args, **kwargs)
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/API.py", line 294, in
>> >> destroy
>> >> > res = self.vm.destroy(gracefulAttempts)
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line
>> 4916, in
>> >> > destroy
>> >> > result = self.doDestroy(gracefulAttempts, reason)
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line
>> 4935, in
>> >> > doDestroy
>> >> > return self.releaseVm(gracefulAttempts)
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line
>> 4828, in
>> >> > releaseVm
>> >> > self.guestAgent.stop()
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/virt/guestagent.py",
>> line
>> >> > 458, in stop
>> >> > self._channelListener.unregister(self._sock.fileno())
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/virt/vmchannels.py",
>> line
>> >> > 257, in unregister
>> >> > self._unregister_fd(fileno)
>> >> > File "/usr/lib/python3.6/site-packages/vdsm/virt/vmchannels.py",
>> line
>> >> 67,
>> >> > in _unregister_fd
>> >> > self._epoll.unregister(fileno)
>> >> > ValueError: file descriptor cannot be a negative integer (-1)
>> >> >
>> >> > On Thu, Jul 18, 2019 at 8:35 AM Milan Zamazal <mzamazal(a)redhat.com>
>> >> wrote:
>> >> >
>> >> >> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >>
>> >> >> > 1. Had couple of small patches pushed to darkthrone py3_poc branch
>> >> >> >
>> >> >> > 2. Have a sequel document to Milan's installation guide abuts
>> SSL-less
>> >> >> vdsm
>> >> >> > and engine:
>> >> >> >
>> >> >>
>> >>
>> https://drive.google.com/open?id=1jSt-LXSY8S6J8eTjt_-JU3Ph4ZNNnBoZBaJBWe8...
>> >> >> >
>> >> >> > 3. Milan, you might want to update the BREW installation section -
>> >> vdsm
>> >> >> > install wants a more up-to-date ioprocess rpms,
>> >> >> > I updated it in the guide copy here:
>> >> >> >
>> >> >>
>> >>
>> https://drive.google.com/open?id=1jSt-LXSY8S6J8eTjt_-JU3Ph4ZNNnBoZBaJBWe8...
>> >> >> > It now has:
>> >> >> >
>> >>
>> $BREW/ioprocess/1.2.1/1.el8ev/x86_64/ioprocess-1.2.1-1.el8ev.x86_64.rpm \
>> >> >> >
>> >> >>
>> >>
>> $BREW/ioprocess/1.2.1/1.el8ev/x86_64/python3-ioprocess-1.2.1-1.el8ev.x86_64.rpm
>> >> >>
>> >> >> It should be already in the updated document I sent to rhev-devel@
>> >> >> yesterday.
>> >> >>
>> >> >> > 4. Latest error when try to register host at engine:"Host
>> 10.35.0.136
>> >> is
>> >> >> > installed with VDSM version (4.40) and cannot join cluster Default
>> >> which
>> >> >> is
>> >> >> > compatible with VDSM versions [4.17, 4.18]." - Can we fake the
>> version
>> >> >> > somehow?
>> >> >>
>> >> >> This has been fixed in Engine, both master and 4.3, some time ago.
>> >> >> Please upgrade to current Engine version.
>> >> >>
>> >> >> > On Wed, Jul 17, 2019 at 4:38 PM Marcin Sobczyk <
>> msobczyk(a)redhat.com>
>> >> >> wrote:
>> >> >> >
>> >> >> >>
>> >> >> >> On 7/17/19 3:27 PM, Marcin Sobczyk wrote:
>> >> >> >> >
>> >> >> >> > On 7/17/19 3:04 PM, Milan Zamazal wrote:
>> >> >> >> >> Marcin Sobczyk <msobczyk(a)redhat.com> writes:
>> >> >> >> >>
>> >> >> >> >>> On 7/16/19 5:11 PM, Marcin Sobczyk wrote:
>> >> >> >> >>>> On 7/16/19 4:47 PM, Milan Zamazal wrote:
>> >> >> >> >>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>
>> >> >> >> >>>>>> +Marcin Sobczyk <msobczyk(a)redhat.com>
>> >> >> >> >>>>>>
>> >> >> >> >>>>>> On Tue, Jul 16, 2019 at 5:23 PM Amit Bawer <
>> abawer(a)redhat.com
>> >> >
>> >> >> >> >>>>>> wrote:
>> >> >> >> >>>>>>
>> >> >> >> >>>>>>> I believe i tried all the variations after vdsm.id
>> creation.
>> >> >> >> >>>>>>> engine.log shows following error for ssh attempts to
>> overlord
>> >> >> >> >>>>>>> the host
>> >> >> >> >>>>>>> from the engine:
>> >> >> >> >>>>>>>
>> >> >> >> >>>>>>> SS_ERROR(511), An error has occurred during installation
>> of
>> >> Host
>> >> >> >> >>>>>>> rhel8:
>> >> >> >> >>>>>>> Failed to execute stage 'Environment customization': No
>> >> module
>> >> >> >> >>>>>>> named
>> >> >> >> >>>>>>> 'rpmUtils'.
>> >> >> >> >>>>>>>
>> >> >> >> >>>>>>> Could this be the reason?
>> >> >> >> >>>>> I don't think Engine can manage the host, this is why we
>> have
>> >> to
>> >> >> >> >>>>> bother
>> >> >> >> >>>>> with the manual setup. rpmUtils is no longer available on
>> >> RHEL 8,
>> >> >> >> >>>>> there
>> >> >> >> >>>>> was a patch to ovirt-host-deploy (
>> >> https://gerrit.ovirt.org/101293
>> >> >> )
>> >> >> >> >>>>> but
>> >> >> >> >>>>> there are probably more places to fix.
>> >> >> >> >>>>>
>> >> >> >> >>>>> I can't remember what I did exactly regarding vdsm.id. I
>> can
>> >> >> >> suggest
>> >> >> >> >>>>> only trying switching to maintenance and activate again
>> after
>> >> the
>> >> >> >> >>>>> failed
>> >> >> >> >>>>> installation.
>> >> >> >> >>>>>
>> >> >> >> >>>>> Marcin, do you have any better advice?
>> >> >> >> >>>> Nope, unfortunately. Since the host deployment process
>> fails in
>> >> >> >> >>>> various interesting ways, my methodology also relies on the
>> >> >> >> >>>> "maintenance --> activate" trick.
>> >> >> >> >>>> I also never generated and 'vdsm.id' by myself.
>> >> >> >> >>> Oh, regarding 'vdsm.id'. This might help:
>> >> >> >> >>>
>> >> >> >> >>> diff --git a/lib/vdsm/host/__init__.py
>> >> b/lib/vdsm/host/__init__.py
>> >> >> >> >>> index 334c88d1f..2aee4ea77 100644
>> >> >> >> >>> --- a/lib/vdsm/host/__init__.py
>> >> >> >> >>> +++ b/lib/vdsm/host/__init__.py
>> >> >> >> >>> @@ -47,6 +47,7 @@ def uuid():
>> >> >> >> >>> "system-uuid"],
>> >> >> >> >>> raw=True,
>> >> >> >> >>> sudo=True)
>> >> >> >> >>> + out = out.decode('utf-8')
>> >> >> >> >>> out = '\n'.join(line for line in
>> >> out.splitlines()
>> >> >> >> >>> if not
>> line.startswith('#'))
>> >> >> >> >>
>> >> >> >> >> It indeed seems to help, thank you. Would you like to post a
>> >> patch?
>> >> >> >> >
>> >> >> >> > Great! Sure, will do so.
>> >> >> >>
>> >> >> >> 3c08f9cc2fc1eb9390f1a68e1828bfb297307603 on darkthrone. Will
>> post to
>> >> >> >> gerrit later.
>> >> >> >>
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >>
>> >> >> >> >>>> Still, I never managed to get my RHEL8 host to 'Up' status -
>> >> it's
>> >> >> >> >>>> still 'NonOperational'.
>> >> >> >> >>>>
>> >> >> >> >>>>
>> >> >> >> >>>>>>> On Tue, Jul 16, 2019 at 4:54 PM Milan Zamazal
>> >> >> >> >>>>>>> <mzamazal(a)redhat.com> wrote:
>> >> >> >> >>>>>>>
>> >> >> >> >>>>>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>>> Getting following error for attempting to Activate the
>> >> rhel8
>> >> >> >> >>>>>>>>> host from
>> >> >> >> >>>>>>>> web
>> >> >> >> >>>>>>>>> mgmt:
>> >> >> >> >>>>>>>>>
>> >> >> >> >>>>>>>>> [image: image.png]
>> >> >> >> >>>>>>>> Ah, right, you must do
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>> uuidgen > /etc/vdsm/vdsm.id
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>> to create the host id. I don't know how to tell Engine
>> >> about
>> >> >> the
>> >> >> >> >>>>>>>> change, perhaps it detects it itself, perhaps the host
>> must
>> >> be
>> >> >> >> >>>>>>>> switched
>> >> >> >> >>>>>>>> to maintenance and then activated, perhaps it must be
>> >> removed
>> >> >> >> >>>>>>>> and added
>> >> >> >> >>>>>>>> again (the previously performed actions on the host
>> needn't
>> >> be
>> >> >> >> >>>>>>>> repeated
>> >> >> >> >>>>>>>> again in such a case, I believe).
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>>> On Tue, Jul 16, 2019 at 4:27 PM Milan Zamazal
>> >> >> >> >>>>>>>>> <mzamazal(a)redhat.com>
>> >> >> >> >>>>>>>> wrote:
>> >> >> >> >>>>>>>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>>>>>>
>> >> >> >> >>>>>>>>>>> On Tue, Jul 16, 2019 at 3:16 PM Milan Zamazal
>> >> >> >> >>>>>>>>>>> <mzamazal(a)redhat.com>
>> >> >> >> >>>>>>>>>> wrote:
>> >> >> >> >>>>>>>>>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>> On Tue, Jul 16, 2019 at 12:37 PM Milan Zamazal <
>> >> >> >> >>>>>>>> mzamazal(a)redhat.com>
>> >> >> >> >>>>>>>>>>>> wrote:
>> >> >> >> >>>>>>>>>>>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>> On Tue, Jul 16, 2019 at 10:46 AM Milan Zamazal <
>> >> >> >> >>>>>>>>>> mzamazal(a)redhat.com>
>> >> >> >> >>>>>>>>>>>>>> wrote:
>> >> >> >> >>>>>>>>>>>>>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>> after 60s with not interruption it is timedout
>> >> >> >> >>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>> No subscription with
>> >> >> >> >>>>>>>>>>>>>>>>> 227243a0-c4fc-4fb6-b2ff-6e79ad362452 id
>> >> >> >> >>>>>>>>>>>>>>>>> vdsm-client: Request Host.setupNetworks with
>> args
>> >> >> >> >>>>>>>> {'networks':
>> >> >> >> >>>>>>>>>>>>>>>>> {'ovirtmgmt': {'nic': 'ens3', 'bootproto':
>> 'dhcp',
>> >> >> >> >>>>>>>>>> 'defaultRoute':
>> >> >> >> >>>>>>>>>>>>>>>> True}},
>> >> >> >> >>>>>>>>>>>>>>>>> 'bondings': {}, 'options':
>> {'connectivityCheck':
>> >> >> False}}
>> >> >> >> >>>>>>>> timed
>> >> >> >> >>>>>>>>>> out
>> >> >> >> >>>>>>>>>>>>>> after
>> >> >> >> >>>>>>>>>>>>>>>> 60
>> >> >> >> >>>>>>>>>>>>>>>>> seconds
>> >> >> >> >>>>>>>>>>>>>>>> You can use the script below to bring up
>> ovirtmgmt
>> >> >> >> >>>>>>>>>>>>>>>> manually
>> >> >> >> >>>>>>>>>> (again,
>> >> >> >> >>>>>>>>>>>>>>>> assuming your standard network interface is
>> ens3).
>> >> It
>> >> >> >> >>>>>>>>>>>>>>>> should
>> >> >> >> >>>>>>>>>>>> suffice to
>> >> >> >> >>>>>>>>>>>>>>>> be able to connect the host to Engine, but you
>> have
>> >> to
>> >> >> >> >>>>>>>>>>>>>>>> run it
>> >> >> >> >>>>>>>>>>>> manually
>> >> >> >> >>>>>>>>>>>>>>>> after each host boot.
>> >> >> >> >>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>> Thanks, I think for RHEL8 brctl was replaced by
>> >> nmcli:
>> >> >> >> >>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>
>> >> >> >>
>> >> >>
>> >>
>> https://computingforgeeks.com/how-to-create-a-linux-network-bridge-on-rhe...
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>> Does vdsm-client work for you fine otherwise
>> (e.g.
>> >> for
>> >> >> >> >>>>>>>>>>>>>>>> calls
>> >> >> >> >>>>>>>> such
>> >> >> >> >>>>>>>>>> as
>> >> >> >> >>>>>>>>>>>>>>>> `vdsm-client Host getCapabilities'?). If so,
>> I'd
>> >> >> suggest
>> >> >> >> >>>>>>>> catching
>> >> >> >> >>>>>>>>>>>>>>>> someone from the networking team (Edward?,
>> Bell?) to
>> >> >> >> >>>>>>>>>>>>>>>> help you
>> >> >> >> >>>>>>>> with
>> >> >> >> >>>>>>>>>>>>>>>> setupNetworks.
>> >> >> >> >>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>> No, it hangs for any (insecure) command.
>> >> >> >> >>>>>>>>>>>>>> Does vdsm-client work with secure commands?
>> >> >> >> >>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>> [abawer@dhcp-0-191 RPMS]$ vdsm-client Host
>> >> >> >> >>>>>>>>>>>>> getNetworkStatistics
>> >> >> >> >>>>>>>>>>>>> vdsm-client: Connection to localhost:54321 with
>> >> >> use_tls=True,
>> >> >> >> >>>>>>>>>> timeout=60
>> >> >> >> >>>>>>>>>>>>> failed: [Errno 13] Permission denied
>> >> >> >> >>>>>>>>>>>> Two things to check:
>> >> >> >> >>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>> - Is `vdsm-tool configure' happy and were all the
>> >> services
>> >> >> >> >>>>>>>> (libvirtd,
>> >> >> >> >>>>>>>>>>>> supervdsmd, vdsmd) restarted after last run of
>> >> >> vdsm-tool
>> >> >> >> >>>>>>>> configure?
>> >> >> >> >>>>>>>>>>> Thanks!
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Running insecure vdsm-client worked for following
>> config
>> >> >> and
>> >> >> >> >>>>>>>>>>> course
>> >> >> >> >>>>>>>> of
>> >> >> >> >>>>>>>>>>> actions:
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> [root@dhcp-0-191 abawer]# egrep "ssl|tls|tcp|auth"
>> >> >> >> >>>>>>>> /etc/vdsm/vdsm.conf
>> >> >> >> >>>>>>>>>>> /etc/libvirt/libvirtd.conf /etc/libvirt/qemu.conf |
>> >> grep -v
>> >> >> >> >>>>>>>>>>> "#"
>> >> >> >> >>>>>>>>>>> /etc/vdsm/vdsm.conf:ssl = false
>> >> >> >> >>>>>>>>>>> /etc/libvirt/libvirtd.conf:auth_unix_ro = "none"
>> >> >> >> >>>>>>>>>>> /etc/libvirt/libvirtd.conf:auth_tcp = "none"
>> >> >> >> >>>>>>>>>>> /etc/libvirt/libvirtd.conf:auth_unix_rw="none"
>> >> >> >> >>>>>>>>>>> /etc/libvirt/libvirtd.conf:listen_tcp = 1
>> >> >> >> >>>>>>>>>>> /etc/libvirt/libvirtd.conf:listen_tls = 0
>> >> >> >> >>>>>>>>>>> /etc/libvirt/qemu.conf:spice_tls=0
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>
>> >> >> >>
>> >> >>
>> >>
>> /etc/libvirt/qemu.conf:spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"
>> >> >> >>
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>>
>> >> >> >> >>>>>>>>>>> [root@dhcp-0-191 abawer]# vdsm-tool configure
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Checking configuration status...
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> lvm is configured for vdsm
>> >> >> >> >>>>>>>>>>> Current revision of multipath.conf detected,
>> preserving
>> >> >> >> >>>>>>>>>>> Managed volume database is already configured
>> >> >> >> >>>>>>>>>>> abrt is already configured for vdsm
>> >> >> >> >>>>>>>>>>> libvirt is already configured for vdsm
>> >> >> >> >>>>>>>>>>> SUCCESS: ssl configured to false. No conflicts.
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Running configure...
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Done configuring modules to VDSM.
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Restarted vdsmd, supervdsmd, libvirtd...
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> [abawer@dhcp-0-191 ~]$ service vdsmd status
>> >> >> >> >>>>>>>>>>> Redirecting to /bin/systemctl status vdsmd.service
>> >> >> >> >>>>>>>>>>> ● vdsmd.service - Virtual Desktop Server Manager
>> >> >> >> >>>>>>>>>>> Loaded: loaded
>> >> (/usr/lib/systemd/system/vdsmd.service;
>> >> >> >> >>>>>>>>>>> enabled;
>> >> >> >> >>>>>>>> vendor
>> >> >> >> >>>>>>>>>>> preset: enabled)
>> >> >> >> >>>>>>>>>>> Active: active (running) since Tue 2019-07-16
>> >> 09:11:22
>> >> >> >> >>>>>>>>>>> EDT; 8s ago
>> >> >> >> >>>>>>>>>>> Process: 6963
>> >> >> >> >>>>>>>>>>> ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh
>> >> >> >> >>>>>>>>>>> --post-stop (code=exited, status=0/SUCCESS)
>> >> >> >> >>>>>>>>>>> Process: 6969
>> >> >> >> >>>>>>>>>>> ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh
>> >> >> >> >>>>>>>>>>> --pre-start (code=exited, status=0/SUCCESS)
>> >> >> >> >>>>>>>>>>> Main PID: 7014 (vdsmd)
>> >> >> >> >>>>>>>>>>> Tasks: 38 (limit: 24006)
>> >> >> >> >>>>>>>>>>> Memory: 43.4M
>> >> >> >> >>>>>>>>>>> CGroup: /system.slice/vdsmd.service
>> >> >> >> >>>>>>>>>>> └─7014 /usr/libexec/platform-python
>> >> >> >> >>>>>>>>>>> /usr/share/vdsm/vdsmd
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:21 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsmd_init_common.sh[6969]:
>> >> >> >> >>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>> Running prepare_transient_repository
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:22 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsmd_init_common.sh[6969]:
>> >> >> >> >>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>> Running syslog_available
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:22 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsmd_init_common.sh[6969]:
>> >> >> >> >>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>> Running nwfilter
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:22 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsmd_init_common.sh[6969]:
>> >> >> >> >>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>> Running dummybr
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:22 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsmd_init_common.sh[6969]:
>> >> >> >> >>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>> Running tune_system
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:22 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsmd_init_common.sh[6969]:
>> >> >> >> >>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>> Running test_space
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:22 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsmd_init_common.sh[6969]:
>> >> >> >> >>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>> Running test_lo
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:22 dhcp-0-191.tlv.redhat.com
>> systemd[1]:
>> >> >> Started
>> >> >> >> >>>>>>>> Virtual
>> >> >> >> >>>>>>>>>>> Desktop Server Manager.
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:23 dhcp-0-191.tlv.redhat.com
>> vdsm[7014]:
>> >> WARN
>> >> >> >> >>>>>>>>>>> MOM not
>> >> >> >> >>>>>>>>>>> available.
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:23 dhcp-0-191.tlv.redhat.com
>> vdsm[7014]:
>> >> WARN
>> >> >> >> >>>>>>>>>>> MOM not
>> >> >> >> >>>>>>>>>>> available, KSM stats will be missing.
>> >> >> >> >>>>>>>>>>> [abawer@dhcp-0-191 ~]$ service supervdsmd status
>> >> >> >> >>>>>>>>>>> Redirecting to /bin/systemctl status
>> supervdsmd.service
>> >> >> >> >>>>>>>>>>> ● supervdsmd.service - Auxiliary vdsm service for
>> running
>> >> >> >> >>>>>>>>>>> helper
>> >> >> >> >>>>>>>>>> functions
>> >> >> >> >>>>>>>>>>> as root
>> >> >> >> >>>>>>>>>>> Loaded: loaded
>> >> >> >> >>>>>>>>>>> (/usr/lib/systemd/system/supervdsmd.service;
>> >> >> >> >>>>>>>> static;
>> >> >> >> >>>>>>>>>>> vendor preset: enabled)
>> >> >> >> >>>>>>>>>>> Active: active (running) since Tue 2019-07-16
>> >> 09:11:19
>> >> >> >> >>>>>>>>>>> EDT; 17s
>> >> >> >> >>>>>>>> ago
>> >> >> >> >>>>>>>>>>> Main PID: 6968 (supervdsmd)
>> >> >> >> >>>>>>>>>>> Tasks: 5 (limit: 24006)
>> >> >> >> >>>>>>>>>>> Memory: 20.9M
>> >> >> >> >>>>>>>>>>> CGroup: /system.slice/supervdsmd.service
>> >> >> >> >>>>>>>>>>> └─6968 /usr/libexec/platform-python
>> >> >> >> >>>>>>>> /usr/share/vdsm/supervdsmd
>> >> >> >> >>>>>>>>>>> --sockfile /var/run/vdsm/svdsm.sock
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:19 dhcp-0-191.tlv.redhat.com
>> systemd[1]:
>> >> >> Stopped
>> >> >> >> >>>>>>>> Auxiliary
>> >> >> >> >>>>>>>>>>> vdsm service for running helper functions as root.
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:19 dhcp-0-191.tlv.redhat.com
>> systemd[1]:
>> >> >> Started
>> >> >> >> >>>>>>>> Auxiliary
>> >> >> >> >>>>>>>>>>> vdsm service for running helper functions as root.
>> >> >> >> >>>>>>>>>>> [abawer@dhcp-0-191 ~]$ service libvirtd status
>> >> >> >> >>>>>>>>>>> Redirecting to /bin/systemctl status libvirtd.service
>> >> >> >> >>>>>>>>>>> ● libvirtd.service - Virtualization daemon
>> >> >> >> >>>>>>>>>>> Loaded: loaded
>> >> >> (/usr/lib/systemd/system/libvirtd.service;
>> >> >> >> >>>>>>>>>>> enabled;
>> >> >> >> >>>>>>>>>>> vendor preset: enabled)
>> >> >> >> >>>>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d
>> >> >> >> >>>>>>>>>>> └─unlimited-core.conf
>> >> >> >> >>>>>>>>>>> Active: active (running) since Tue 2019-07-16
>> >> 09:11:04
>> >> >> >> >>>>>>>>>>> EDT; 38s
>> >> >> >> >>>>>>>> ago
>> >> >> >> >>>>>>>>>>> Docs: man:libvirtd(8)
>> >> >> >> >>>>>>>>>>> https://libvirt.org
>> >> >> >> >>>>>>>>>>> Main PID: 6448 (libvirtd)
>> >> >> >> >>>>>>>>>>> Tasks: 17 (limit: 32768)
>> >> >> >> >>>>>>>>>>> Memory: 12.5M
>> >> >> >> >>>>>>>>>>> CGroup: /system.slice/libvirtd.service
>> >> >> >> >>>>>>>>>>> └─6448 /usr/sbin/libvirtd --listen
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:04 dhcp-0-191.tlv.redhat.com
>> systemd[1]:
>> >> >> Stopped
>> >> >> >> >>>>>>>>>>> Virtualization daemon.
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:04 dhcp-0-191.tlv.redhat.com
>> systemd[1]:
>> >> >> Starting
>> >> >> >> >>>>>>>>>>> Virtualization daemon...
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:04 dhcp-0-191.tlv.redhat.com
>> systemd[1]:
>> >> >> Started
>> >> >> >> >>>>>>>>>>> Virtualization daemon.
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:09 dhcp-0-191.tlv.redhat.com
>> >> libvirtd[6448]:
>> >> >> >> >>>>>>>>>>> libvirt
>> >> >> >> >>>>>>>>>> version:
>> >> >> >> >>>>>>>>>>> 5.0.0, package: 7.module+el8+2887+effa3c42 (Red Hat,
>> >> Inc. <
>> >> >> >> >>>>>>>>>>> http://bugzilla.redhat.>
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:09 dhcp-0-191.tlv.redhat.com
>> >> libvirtd[6448]:
>> >> >> >> >>>>>>>>>>> hostname:
>> >> >> >> >>>>>>>>>>> dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:09 dhcp-0-191.tlv.redhat.com
>> >> libvirtd[6448]:
>> >> >> >> >>>>>>>>>>> End of
>> >> >> >> >>>>>>>> file
>> >> >> >> >>>>>>>>>> while
>> >> >> >> >>>>>>>>>>> reading data: Input/output error
>> >> >> >> >>>>>>>>>>> Jul 16 09:11:19 dhcp-0-191.tlv.redhat.com
>> >> libvirtd[6448]:
>> >> >> >> >>>>>>>>>>> End of
>> >> >> >> >>>>>>>> file
>> >> >> >> >>>>>>>>>> while
>> >> >> >> >>>>>>>>>>> reading data: Input/output error
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> [abawer@dhcp-0-191 ~]$ echo '{"networks":
>> {"ovirtmgmt":
>> >> >> >> {"nic":
>> >> >> >> >>>>>>>>>> "enp0s3",
>> >> >> >> >>>>>>>>>>> "bootproto": "dhcp", "defaultRoute": true}},
>> "bondings":
>> >> {},
>> >> >> >> >>>>>>>> "options":
>> >> >> >> >>>>>>>>>>> {"connectivityCheck": false}}' | vdsm-client
>> --insecure
>> >> -f -
>> >> >> >> >>>>>>>>>>> Host
>> >> >> >> >>>>>>>>>>> setupNetworks
>> >> >> >> >>>>>>>>>>> {
>> >> >> >> >>>>>>>>>>> "code": 0,
>> >> >> >> >>>>>>>>>>> "message": "Done"
>> >> >> >> >>>>>>>>>>> }
>> >> >> >> >>>>>>>>>>>
>> >> >> >> >>>>>>>>>>> [abawer@dhcp-0-191 ~]$
>> >> >> >> >>>>>>>>>> Looks fine, great. If networking works fine after
>> this
>> >> >> change
>> >> >> >> >>>>>>>>>> don't
>> >> >> >> >>>>>>>>>> forget to run
>> >> >> >> >>>>>>>>>>
>> >> >> >> >>>>>>>>>> vdsm-client Host setSafeNetworkConfig
>> >> >> >> >>>>>>>>>>
>> >> >> >> >>>>>>>>>> before reboot to save the configuration.
>> >> >> >> >>>>>>>>>>
>> >> >> >> >>>>>>>>>> Can you activate the host in Engine now?
>> >> >> >> >>>>>>>>>>
>> >> >> >> >>>>>>>>>>>> - Are there any details reported about the error in
>> >> >> vdsm.log?
>> >> >> >> >>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>> seems like the vdsm in non responsive for rpc
>> >> although
>> >> >> >> >>>>>>>> according to
>> >> >> >> >>>>>>>>>>>>>>> vdsm.log it seems the connections are accepted
>> during
>> >> >> >> >>>>>>>> vdsm-client
>> >> >> >> >>>>>>>>>>>>>>> execution.
>> >> >> >> >>>>>>>>>>>>>> Just to be sure: Do you have current master?
>> >> >> >> >>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>> commit 8d8b74dfbab8514437c1ce3edd05b9bdda834129
>> >> >> >> >>>>>>>>>>>>> (github/master)
>> >> >> >> >>>>>>>>>>>>> Author: Nir Soffer <nsoffer(a)redhat.com>
>> >> >> >> >>>>>>>>>>>>> Date: Mon Jul 15 03:15:52 2019 +0300
>> >> >> >> >>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>> On top of it i have some local py3 fixes which are
>> >> only on
>> >> >> >> >>>>>>>>>>>>> storage
>> >> >> >> >>>>>>>>>>>> component
>> >> >> >> >>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>> OK, should be fine.
>> >> >> >> >>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>> Will ask, Thanks.
>> >> >> >> >>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>> On Mon, Jul 15, 2019 at 6:28 PM Amit Bawer <
>> >> >> >> >>>>>>>> abawer(a)redhat.com>
>> >> >> >> >>>>>>>>>>>> wrote:
>> >> >> >> >>>>>>>>>>>>>>>>>> Thanks, but now it hangs for --insecure
>> execution
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>> echo '{"networks": {"ovirtmgmt": {"nic":
>> "ens3",
>> >> >> >> >>>>>>>> "bootproto":
>> >> >> >> >>>>>>>>>>>> "dhcp",
>> >> >> >> >>>>>>>>>>>>>>>>>> "defaultRoute": true}}, "bondings": {},
>> "options":
>> >> >> >> >>>>>>>>>>>>>> {"connectivityCheck":
>> >> >> >> >>>>>>>>>>>>>>>>>> false}}' | vdsm-client --insecure -f - Host
>> >> >> >> >>>>>>>>>>>>>>>>>> setupNetworks
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>> Ctrl+C dumps
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>> No subscription with
>> >> >> >> >>>>>>>>>>>>>>>>>> caf3d1fa-3331-44af-8d54-a65bd5d7d042
>> >> >> >> >>>>>>>> id
>> >> >> >> >>>>>>>>>>>>>>>>>> Traceback (most recent call last):
>> >> >> >> >>>>>>>>>>>>>>>>>> File "/usr/bin/vdsm-client", line 25, in
>> >> <module>
>> >> >> >> >>>>>>>>>>>>>>>>>> client.main()
>> >> >> >> >>>>>>>>>>>>>>>>>> File
>> >> >> >> >>>>>>>> "/usr/lib/python3.6/site-packages/vdsmclient/client.py",
>> >> >> >> >>>>>>>>>>>> line
>> >> >> >> >>>>>>>>>>>>>>>> 185,
>> >> >> >> >>>>>>>>>>>>>>>>>> in main
>> >> >> >> >>>>>>>>>>>>>>>>>> result = command(**request_params)
>> >> >> >> >>>>>>>>>>>>>>>>>> File
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> "/usr/lib/python3.6/site-packages/vdsm/client.py",
>> >> >> >> >>>>>>>> line
>> >> >> >> >>>>>>>>>>>> 289,
>> >> >> >> >>>>>>>>>>>>>> in
>> >> >> >> >>>>>>>>>>>>>>>>>> _call
>> >> >> >> >>>>>>>>>>>>>>>>>> req, timeout=timeout,
>> flow_id=self._flow_id)
>> >> >> >> >>>>>>>>>>>>>>>>>> File
>> >> >> >> >>>>>>>>>>>>
>> >> >> "/usr/lib/python3.6/site-packages/yajsonrpc/jsonrpcclient.py",
>> >> >> >> >>>>>>>>>>>>>>>> line
>> >> >> >> >>>>>>>>>>>>>>>>>> 91, in call
>> >> >> >> >>>>>>>>>>>>>>>>>> call.wait(kwargs.get('timeout', CALL_TIMEOUT))
>> >> >> >> >>>>>>>>>>>>>>>>>> File
>> >> >> >> >>>>>>>>>>>>
>> >> >> "/usr/lib/python3.6/site-packages/yajsonrpc/jsonrpcclient.py",
>> >> >> >> >>>>>>>>>>>>>>>> line
>> >> >> >> >>>>>>>>>>>>>>>>>> 290, in wait
>> >> >> >> >>>>>>>>>>>>>>>>>> self._ev.wait(timeout)
>> >> >> >> >>>>>>>>>>>>>>>>>> File "/usr/lib64/python3.6/threading.py",
>> line
>> >> >> >> >>>>>>>>>>>>>>>>>> 551, in
>> >> >> >> >>>>>>>> wait
>> >> >> >> >>>>>>>>>>>>>>>>>> signaled = self._cond.wait(timeout)
>> >> >> >> >>>>>>>>>>>>>>>>>> File "/usr/lib64/python3.6/threading.py",
>> line
>> >> >> >> >>>>>>>>>>>>>>>>>> 299, in
>> >> >> >> >>>>>>>> wait
>> >> >> >> >>>>>>>>>>>>>>>>>> gotit = waiter.acquire(True, timeout)
>> >> >> >> >>>>>>>>>>>>>>>>>> KeyboardInterrupt
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>> On Mon, Jul 15, 2019 at 6:15 PM Milan Zamazal
>> <
>> >> >> >> >>>>>>>>>>>> mzamazal(a)redhat.com>
>> >> >> >> >>>>>>>>>>>>>>>> wrote:
>> >> >> >> >>>>>>>>>>>>>>>>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>> On Mon, Jul 15, 2019 at 5:50 PM Milan
>> Zamazal <
>> >> >> >> >>>>>>>>>>>>>> mzamazal(a)redhat.com>
>> >> >> >> >>>>>>>>>>>>>>>>>>> wrote:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> Amit Bawer <abawer(a)redhat.com> writes:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> I followed your RHEL8 vdsm guide, was very
>> >> useful
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> for
>> >> >> >> >>>>>>>>>>>>>> installing
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsm on
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> RHEL8.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Though I had to build MOM locally and it
>> >> doesn't
>> >> >> >> >>>>>>>> seem to
>> >> >> >> >>>>>>>>>>>> fully
>> >> >> >> >>>>>>>>>>>>>>>> work
>> >> >> >> >>>>>>>>>>>>>>>>>>> on
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> RHEL8 yet.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> I don't think MoM is required for
>> anything, you
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> should
>> >> >> >> >>>>>>>> be
>> >> >> >> >>>>>>>>>>>> able to
>> >> >> >> >>>>>>>>>>>>>>>> run
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> Vdsm happily without it and `vdsm' package
>> >> >> currently
>> >> >> >> >>>>>>>>>> doesn't
>> >> >> >> >>>>>>>>>>>>>> depend
>> >> >> >> >>>>>>>>>>>>>>>> on
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> it on RHEL 8. A fix was posted for one
>> issue
>> >> >> today:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> https://gerrit.ovirt.org/101804. If you
>> have
>> >> any
>> >> >> >> >>>>>>>> other
>> >> >> >> >>>>>>>>>>>> troubles
>> >> >> >> >>>>>>>>>>>>>>>> with
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> MoM, please report them to Andrej Krejčíř <
>> >> >> >> >>>>>>>>>>>> akrejcir(a)redhat.com>.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Next step is to test attach NFS domain,
>> have
>> >> to
>> >> >> set
>> >> >> >> >>>>>>>> up an
>> >> >> >> >>>>>>>>>>>>>> engine
>> >> >> >> >>>>>>>>>>>>>>>>>>> first
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> since it seems that vdsm-client is not the
>> >> >> >> >>>>>>>>>> straightforward
>> >> >> >> >>>>>>>>>>>>>> choice
>> >> >> >> >>>>>>>>>>>>>>>> for
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> this
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> operation.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> Please note that since host deploy etc. is
>> not
>> >> >> fully
>> >> >> >> >>>>>>>>>> working
>> >> >> >> >>>>>>>>>>>> yet
>> >> >> >> >>>>>>>>>>>>>>>> it's a
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> bit tricky to attach a RHEL 8 host to
>> Engine.
>> >> But
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> it's
>> >> >> >> >>>>>>>>>>>> doable.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> - A host is added to Engine. Its
>> installation
>> >> will
>> >> >> >> >>>>>>>> fail,
>> >> >> >> >>>>>>>>>> but
>> >> >> >> >>>>>>>>>>>>>> Engine
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> will know about the host.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> - Vdsm can be installed and run manually
>> on the
>> >> >> host,
>> >> >> >> >>>>>>>>>> you've
>> >> >> >> >>>>>>>>>>>>>> already
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> done that.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> - You need to set up `ovirtmgmt' network in
>> >> order
>> >> >> to
>> >> >> >> >>>>>>>> talk
>> >> >> >> >>>>>>>>>> with
>> >> >> >> >>>>>>>>>>>>>>>> Engine.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> Here is what I've used on the host, based
>> on
>> >> >> advice
>> >> >> >> >>>>>>>> from
>> >> >> >> >>>>>>>>>>>>>> network
>> >> >> >> >>>>>>>>>>>>>>>>>>> guys:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> echo '{"networks": {"ovirtmgmt": {"nic":
>> >> "ens3",
>> >> >> >> >>>>>>>>>>>> "bootproto":
>> >> >> >> >>>>>>>>>>>>>>>>>>> "dhcp",
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> "defaultRoute": true}}, "bondings": {},
>> >> "options":
>> >> >> >> >>>>>>>>>>>>>>>>>>> {"connectivityCheck":
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> false}}' | vdsm-client -f - Host
>> setupNetworks
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>> gives me
>> >> >> >> >>>>>>>>>>>>>>>>>>>> �� vdsm-client: Connection to
>> localhost:54321
>> >> with
>> >> >> >> >>>>>>>>>> use_tls=True,
>> >> >> >> >>>>>>>>>>>>>>>>>>> timeout=60
>> >> >> >> >>>>>>>>>>>>>>>>>>>> failed: [Errno 13] Permission denied
>> >> >> >> >>>>>>>>>>>>>>>>>>>> for either local user or root user
>> >> >> >> >>>>>>>>>>>>>>>>>>> I think I experienced something similar when
>> I
>> >> >> >> >>>>>>>>>>>>>>>>>>> installed
>> >> >> >> >>>>>>>> the
>> >> >> >> >>>>>>>>>>>>>>>>>>> certificates to /etc/pki/vdsm from another
>> host
>> >> and
>> >> >> >> >>>>>>>> forgot to
>> >> >> >> >>>>>>>>>>>> change
>> >> >> >> >>>>>>>>>>>>>>>>>>> their owners to vdsm:kvm. You may also try
>> to
>> >> >> disable
>> >> >> >> >>>>>>>> ssl in
>> >> >> >> >>>>>>>>>>>>>> vdsm.conf
>> >> >> >> >>>>>>>>>>>>>>>>>>> (don't forget to run `vdsm-tool configure'
>> >> >> afterwards)
>> >> >> >> >>>>>>>> and run
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsm-client with --insecure option.
>> >> >> >> >>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm-client Host setSafeNetworkConfig
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> reboot
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> ("ens3" above is my default network
>> >> interface
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> on the
>> >> >> >> >>>>>>>>>> host.)
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> Beware the first command (or other
>> commands)
>> >> may
>> >> >> >> >>>>>>>>>> disconnect
>> >> >> >> >>>>>>>>>>>> you
>> >> >> >> >>>>>>>>>>>>>>>> from
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> the host and leave the host disconnected,
>> so be
>> >> >> sure
>> >> >> >> >>>>>>>> to
>> >> >> >> >>>>>>>>>>>> perform
>> >> >> >> >>>>>>>>>>>>>>>> the
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> commands from a console in case you decide
>> to
>> >> >> >> >>>>>>>> configure
>> >> >> >> >>>>>>>>>>>>>> networking
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> this way.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> - In case you use TLS communication with
>> >> Engine,
>> >> >> it
>> >> >> >> >>>>>>>> may be
>> >> >> >> >>>>>>>>>>>>>>>> necessary to
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> set up the certificates manually (while
>> Engine
>> >> >> enroll
>> >> >> >> >>>>>>>>>>>>>> certificate
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> operation seemed to report success in the
>> UI,
>> >> the
>> >> >> >> >>>>>>>>>>>> certificates
>> >> >> >> >>>>>>>>>>>>>>>>>>> weren't
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> installed for me). That means (courtesy to
>> >> Marcin
>> >> >> >> >>>>>>>>>> Sobczyk
>> >> >> >> >>>>>>>>>>>> for
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> providing these tips):
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> - Enable legacy crypto policies:
>> >> >> >> >>>>>>>> update-crypto-policies
>> >> >> >> >>>>>>>>>>>> --set
>> >> >> >> >>>>>>>>>>>>>>>> LEGACY
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> - On the host side, copy /etc/pki/vdsm from
>> >> some
>> >> >> host
>> >> >> >> >>>>>>>>>>>> already
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> successfully connected to the same Engine.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> - On the Engine side, copy
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> /etc/pki/ovirt-engine/requests/HOSTNAME.com.req
>> >> >> for
>> >> >> >> >>>>>>>>>> your
>> >> >> >> >>>>>>>>>>>> host
>> >> >> >> >>>>>>>>>>>>>>>> named
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> HOSTNAME from an already connected host.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> When not using TLS, no further special
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> arrangements
>> >> >> >> >>>>>>>>>> should
>> >> >> >> >>>>>>>>>>>> be
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> necessary.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> Thank you for info, please tell me when you
>> >> have
>> >> >> >> >>>>>>>> anything
>> >> >> >> >>>>>>>>>> new
>> >> >> >> >>>>>>>>>>>> or
>> >> >> >> >>>>>>>>>>>>>> you
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> need some help.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> [root@dhcp-0-191 ~]# uname -rn
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> dhcp-0-191.tlv.redhat.com
>> >> 4.18.0-80.el8.x86_64
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> [root@dhcp-0-191 ~]# systemctl status
>> vdsmd
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> ● vdsmd.service - Virtual Desktop Server
>> >> Manager
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Loaded: loaded
>> >> >> >> >>>>>>>> (/usr/lib/systemd/system/vdsmd.service;
>> >> >> >> >>>>>>>>>>>>>> enabled;
>> >> >> >> >>>>>>>>>>>>>>>>>>> vendor
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> preset: enabled)
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Active: active (running) since Mon
>> >> >> 2019-07-15
>> >> >> >> >>>>>>>> 09:02:06
>> >> >> >> >>>>>>>>>>>> EDT;
>> >> >> >> >>>>>>>>>>>>>>>> 36min
>> >> >> >> >>>>>>>>>>>>>>>>>>> ago
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Process: 1863
>> >> >> >> >>>>>>>>>>>>>>>>
>> ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> --pre-start (code=exited,
>> status=0/SUCCESS)
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Main PID: 1978 (vdsmd)
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Tasks: 38 (limit: 11516)
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Memory: 63.6M
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> CGroup: /system.slice/vdsmd.service
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> └─1978
>> >> /usr/libexec/platform-python
>> >> >> >> >>>>>>>>>>>>>>>> /usr/share/vdsm/vdsmd
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:05 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsmd_init_common.sh[1863]:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Running prepare_transient_repository
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:05 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsmd_init_common.sh[1863]:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Running syslog_available
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:05 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsmd_init_common.sh[1863]:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Running nwfilter
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:06 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsmd_init_common.sh[1863]:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Running dummybr
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:06 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsmd_init_common.sh[1863]:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Running tune_system
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:06 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsmd_init_common.sh[1863]:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Running test_space
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:06 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>>>>>>>>>>>>> vdsmd_init_common.sh[1863]:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> vdsm:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Running test_lo
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:06 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> systemd[1]:
>> >> >> >> >>>>>>>>>>>> Started
>> >> >> >> >>>>>>>>>>>>>>>>>>> Virtual
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Desktop Server Manager.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:08 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsm[1978]:
>> >> >> >> >>>>>>>>>> WARN
>> >> >> >> >>>>>>>>>>>> MOM
>> >> >> >> >>>>>>>>>>>>>>>> not
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> available.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> Jul 15 09:02:08 dhcp-0-191.tlv.redhat.com
>> >> >> >> >>>>>>>> vdsm[1978]:
>> >> >> >> >>>>>>>>>> WARN
>> >> >> >> >>>>>>>>>>>> MOM
>> >> >> >> >>>>>>>>>>>>>>>> not
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> available, KSM stats will be missing.
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>> On Mon, Jul 15, 2019 at 4:11 PM Milan
>> Zamazal
>> >> <
>> >> >> >> >>>>>>>>>>>>>>>> mzamazal(a)redhat.com>
>> >> >> >> >>>>>>>>>>>>>>>>>>>>> wrote:
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>>> Hi Amit, how is it going with your work
>> on
>> >> PoC
>> >> >> >> >>>>>>>> NFS? Do
>> >> >> >> >>>>>>>>>> you
>> >> >> >> >>>>>>>>>>>>>> need
>> >> >> >> >>>>>>>>>>>>>>>>>>> help
>> >> >> >> >>>>>>>>>>>>>>>>>>>>>>> with anything? Is there anything to
>> >> experiment
>> >> >> >> >>>>>>>> with?
>> >> >> >>
>> >> >>
>> >>
>>
>
>
4 years, 1 month
getStats exception in Engine
by Ales Musil
Hi,
yesterday we have found out that there is exception thrown in getStats. The
host that was hitting this stayed in connecting state infinitely. This is
caused by recent mom version upgrade in vdsm spec. Mom statistic for
'ksmCpu' is reported as double instead of integer.
I have posted workaround [1] for the vdsm until the proper fix is provided.
Thanks.
Regards,
Ales
[1] https://gerrit.ovirt.org/c/102293/
--
Ales Musil
Associate Software Engineer - RHV Network
Red Hat EMEA <https://www.redhat.com>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
4 years, 1 month
Failure to run engine-setup
by Eyal Shenitzky
Hi All,
I am failing to run engine-setup due to the following issue:
[ INFO ] Generating post install configuration file
'/home/eshenitz/ovirt-engine/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'
[ ERROR ] Failed to execute stage 'Misc configuration': a bytes-like object
is required, not 'str'
[ INFO ] Rolling back database schema
In the setup log I can see -
2019-07-30 10:41:31,418+0300 DEBUG otopi.transaction
transaction._prepare:61 preparing 'File transaction for
'/home/eshenitz/ovirt-engine/etc/ovirt-engine-setup.conf.d/20-s
etup-ovirt-post.conf''
2019-07-30 10:41:31,418+0300 DEBUG otopi.filetransaction
filetransaction.prepare:184 file
'/home/eshenitz/ovirt-engine/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.con
f' missing
2019-07-30 10:41:31,419+0300 DEBUG otopi.transaction
transaction._prepare:66 exception during prepare phase
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/otopi/transaction.py", line 62, in
_prepare
element.prepare()
File "/usr/lib/python3.6/site-packages/otopi/filetransaction.py", line
253, in prepare
os.write(fd, self._content)
TypeError: a bytes-like object is required, not 'str'
2019-07-30 10:41:31,420+0300 DEBUG otopi.context context._executeMethod:145
method exception
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 132, in
_executeMethod
method['method']()
File
"/home/eshenitz/ovirt-engine/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-common/base/core/postinstall.py",
line 98, in _misc
otopicons.CoreEnv.MODIFIED_FILES
File "/usr/lib/python3.6/site-packages/otopi/transaction.py", line 106, in
append
self._prepare(element=element)
File "/usr/lib/python3.6/site-packages/otopi/transaction.py", line 62, in
_prepare
element.prepare()
File "/usr/lib/python3.6/site-packages/otopi/filetransaction.py", line
253, in prepare
os.write(fd, self._content)
TypeError: a bytes-like object is required, not 'str'
2019-07-30 10:41:31,421+0300 ERROR otopi.context context._executeMethod:154
Failed to execute stage 'Misc configuration': a bytes-like object is
required, not 'str'
2019-07-30 10:41:31,421+0300 DEBUG otopi.transaction transaction.abort:119
aborting 'CinderLib Database Transaction'
Does anyone encounter it?
Thanks,
--
Regards,
Eyal Shenitzky
4 years, 1 month
