[Engine-devel] Moving to Jboss AS7
Hey all, The code changes required to make the engine work on Jboss AS7 will soon be push It will, of course, require you to install it, and start working with it :-) A separate E-mail will be sent to notify you all once pushed, and then you'll have to perform the following steps: 1. Download jboss 7.1.0 Beta1b (http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) - There is a newer version, but it has issues in the REST-API, so we decided to work with the beta version until a proper fix will be released. 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh 6. Look inside the JBOSS_HOME/bin/standalone.conf file in order to enable jboss debugging (just uncomment the line JAVA_OPTS="$JAVA_OPTS -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n") 7. If you have a krb5.conf file you are working with, put it in JBOSS_HOME/standalone/configuration directory 8. Run Jboss (and be impressed by the startup speed!) The above will be also added to the wiki page for building the engine as soon as the patches will be pushed upstream. Some facts about Jboss 7: 1. It supports both standalone deployment, and domain deployment. We use the standalone one. 2. Stuff related to the standalone mode can be found in the JBOSS_HOME/standalone directory: * configuration - contains the main configuration file called standalone.xml file, plus some other configuration files * deployments - that's where your deployments should be. When adding a new one, don't forget to create a file called "<deployment-name>.dodeploy" in order to make it deploy. * log - that's where the log files are written (unless stated differently in the standalone.xml file). 3. The different modules that come with Jboss 7 are located in JBOSS_HOME/modules directory * No more common/lib directory. * Every module has a module.xml file which contains it's dependencies in other modules, the jars that are part of the module, and etc. * In order to use a dependency from there you have to add "Dependencies" section to your manifest file (do git grep "Dependencies" to take a look at some examples done in the engine source code). 4. Useful links: * Documentation - https://docs.jboss.org/author/display/AS7/Documentation * Class loading changes - https://docs.jboss.org/author/display/AS7/Class+Loading+in+AS7 * The Jboss community - http://community.jboss.org/wiki Please send issues/feedback to this mailing list. Thank you all, Oved
On 01/11/2012 02:57 PM, Oved Ourfalli wrote:
Hey all,
The code changes required to make the engine work on Jboss AS7 will soon be push It will, of course, require you to install it, and start working with it :-)
A separate E-mail will be sent to notify you all once pushed, and then you'll have to perform the following steps:
1. Download jboss 7.1.0 Beta1b (http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) - There is a newer version, but it has issues in the REST-API, so we decided to work with the beta version until a proper fix will be released. 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh 6. Look inside the JBOSS_HOME/bin/standalone.conf file in order to enable jboss debugging (just uncomment the line JAVA_OPTS="$JAVA_OPTS -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n") 7. If you have a krb5.conf file you are working with, put it in JBOSS_HOME/standalone/configuration directory 8. Run Jboss (and be impressed by the startup speed!)
The above will be also added to the wiki page for building the engine as soon as the patches will be pushed upstream.
Some facts about Jboss 7: 1. It supports both standalone deployment, and domain deployment. We use the standalone one. 2. Stuff related to the standalone mode can be found in the JBOSS_HOME/standalone directory: * configuration - contains the main configuration file called standalone.xml file, plus some other configuration files * deployments - that's where your deployments should be. When adding a new one, don't forget to create a file called "<deployment-name>.dodeploy" in order to make it deploy. * log - that's where the log files are written (unless stated differently in the standalone.xml file). 3. The different modules that come with Jboss 7 are located in JBOSS_HOME/modules directory * No more common/lib directory. * Every module has a module.xml file which contains it's dependencies in other modules, the jars that are part of the module, and etc. * In order to use a dependency from there you have to add "Dependencies" section to your manifest file (do git grep "Dependencies" to take a look at some examples done in the engine source code). 4. Useful links: * Documentation - https://docs.jboss.org/author/display/AS7/Documentation * Class loading changes - https://docs.jboss.org/author/display/AS7/Class+Loading+in+AS7 * The Jboss community - http://community.jboss.org/wiki
Can you explain what should be changed in its script files (or configuration files?) so one can enable remote debugging? Thanks, Yair
Please send issues/feedback to this mailing list.
Thank you all, Oved _______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
On 01/11/2012 03:20 PM, Yair Zaslavsky wrote:
On 01/11/2012 02:57 PM, Oved Ourfalli wrote:
Hey all,
The code changes required to make the engine work on Jboss AS7 will soon be push It will, of course, require you to install it, and start working with it :-)
A separate E-mail will be sent to notify you all once pushed, and then you'll have to perform the following steps:
1. Download jboss 7.1.0 Beta1b (http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) - There is a newer version, but it has issues in the REST-API, so we decided to work with the beta version until a proper fix will be released. 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh 6. Look inside the JBOSS_HOME/bin/standalone.conf file in order to enable jboss debugging (just uncomment the line JAVA_OPTS="$JAVA_OPTS -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n")
7. If you have a krb5.conf file you are working with, put it in JBOSS_HOME/standalone/configuration directory 8. Run Jboss (and be impressed by the startup speed!)
The above will be also added to the wiki page for building the engine as soon as the patches will be pushed upstream.
Some facts about Jboss 7: 1. It supports both standalone deployment, and domain deployment. We use the standalone one. 2. Stuff related to the standalone mode can be found in the JBOSS_HOME/standalone directory: * configuration - contains the main configuration file called standalone.xml file, plus some other configuration files * deployments - that's where your deployments should be. When adding a new one, don't forget to create a file called "<deployment-name>.dodeploy" in order to make it deploy. * log - that's where the log files are written (unless stated differently in the standalone.xml file). 3. The different modules that come with Jboss 7 are located in JBOSS_HOME/modules directory * No more common/lib directory. * Every module has a module.xml file which contains it's dependencies in other modules, the jars that are part of the module, and etc. * In order to use a dependency from there you have to add "Dependencies" section to your manifest file (do git grep "Dependencies" to take a look at some examples done in the engine source code). 4. Useful links: * Documentation - https://docs.jboss.org/author/display/AS7/Documentation * Class loading changes - https://docs.jboss.org/author/display/AS7/Class+Loading+in+AS7 * The Jboss community - http://community.jboss.org/wiki
Can you explain what should be changed in its script files (or configuration files?) so one can enable remote debugging? Thanks, Yair
Actually mentioned at 6 - I guess CTRL+F with "debug" didnt work for me for some reason. I see it's similar to the way we did it in 5.1.0 GA. Thanks Yair
Please send issues/feedback to this mailing list.
Thank you all, Oved _______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
_______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
Hey all, The patches are now pushed! So please, if you fetch from now on you'll have to perform the actions below. The wiki was updated as well. Short list of steps: 1. Download jboss 7.1.0 Beta1b (wget http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh A more descriptive set of steps and notes can be found in my previous E-mail below. I'm here if you need any help. Thank you, Oved ----- Original Message -----
From: "Oved Ourfalli" <ovedo@redhat.com> To: engine-devel@ovirt.org Sent: Wednesday, January 11, 2012 2:57:19 PM Subject: Moving to Jboss AS7
Hey all,
The code changes required to make the engine work on Jboss AS7 will soon be push It will, of course, require you to install it, and start working with it :-)
A separate E-mail will be sent to notify you all once pushed, and then you'll have to perform the following steps:
1. Download jboss 7.1.0 Beta1b (http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) - There is a newer version, but it has issues in the REST-API, so we decided to work with the beta version until a proper fix will be released. 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh 6. Look inside the JBOSS_HOME/bin/standalone.conf file in order to enable jboss debugging (just uncomment the line JAVA_OPTS="$JAVA_OPTS -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n") 7. If you have a krb5.conf file you are working with, put it in JBOSS_HOME/standalone/configuration directory 8. Run Jboss (and be impressed by the startup speed!)
The above will be also added to the wiki page for building the engine as soon as the patches will be pushed upstream.
Some facts about Jboss 7: 1. It supports both standalone deployment, and domain deployment. We use the standalone one. 2. Stuff related to the standalone mode can be found in the JBOSS_HOME/standalone directory: * configuration - contains the main configuration file called standalone.xml file, plus some other configuration files * deployments - that's where your deployments should be. When adding a new one, don't forget to create a file called "<deployment-name>.dodeploy" in order to make it deploy. * log - that's where the log files are written (unless stated differently in the standalone.xml file). 3. The different modules that come with Jboss 7 are located in JBOSS_HOME/modules directory * No more common/lib directory. * Every module has a module.xml file which contains it's dependencies in other modules, the jars that are part of the module, and etc. * In order to use a dependency from there you have to add "Dependencies" section to your manifest file (do git grep "Dependencies" to take a look at some examples done in the engine source code). 4. Useful links: * Documentation - https://docs.jboss.org/author/display/AS7/Documentation * Class loading changes - https://docs.jboss.org/author/display/AS7/Class+Loading+in+AS7 * The Jboss community - http://community.jboss.org/wiki
Please send issues/feedback to this mailing list.
Thank you all, Oved
On 01/15/2012 04:05 AM, Oved Ourfalli wrote:
Hey all, The patches are now pushed!
So please, if you fetch from now on you'll have to perform the actions below. The wiki was updated as well.
Short list of steps: 1. Download jboss 7.1.0 Beta1b (wget http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh
A more descriptive set of steps and notes can be found in my previous E-mail below.
I'm here if you need any help.
Thank you, Oved
----- Original Message -----
From: "Oved Ourfalli"<ovedo@redhat.com> To: engine-devel@ovirt.org Sent: Wednesday, January 11, 2012 2:57:19 PM Subject: Moving to Jboss AS7
Hey all,
The code changes required to make the engine work on Jboss AS7 will soon be push It will, of course, require you to install it, and start working with it :-)
A separate E-mail will be sent to notify you all once pushed, and then you'll have to perform the following steps:
1. Download jboss 7.1.0 Beta1b (http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) - There is a newer version, but it has issues in the REST-API, so we decided to work with the beta version until a proper fix will be released. 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh 6. Look inside the JBOSS_HOME/bin/standalone.conf file in order to enable jboss debugging (just uncomment the line JAVA_OPTS="$JAVA_OPTS -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n") 7. If you have a krb5.conf file you are working with, put it in JBOSS_HOME/standalone/configuration directory 8. Run Jboss (and be impressed by the startup speed!)
The above will be also added to the wiki page for building the engine as soon as the patches will be pushed upstream.
Some facts about Jboss 7: 1. It supports both standalone deployment, and domain deployment. We use the standalone one. 2. Stuff related to the standalone mode can be found in the JBOSS_HOME/standalone directory: * configuration - contains the main configuration file called standalone.xml file, plus some other configuration files * deployments - that's where your deployments should be. When adding a new one, don't forget to create a file called "<deployment-name>.dodeploy" in order to make it deploy. * log - that's where the log files are written (unless stated differently in the standalone.xml file). 3. The different modules that come with Jboss 7 are located in JBOSS_HOME/modules directory * No more common/lib directory. * Every module has a module.xml file which contains it's dependencies in other modules, the jars that are part of the module, and etc. * In order to use a dependency from there you have to add "Dependencies" section to your manifest file (do git grep "Dependencies" to take a look at some examples done in the engine source code). 4. Useful links: * Documentation - https://docs.jboss.org/author/display/AS7/Documentation * Class loading changes - https://docs.jboss.org/author/display/AS7/Class+Loading+in+AS7 * The Jboss community - http://community.jboss.org/wiki
Please send issues/feedback to this mailing list.
Thank you all, Oved
Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel I didn't realize until now that these changes would prevent deploying to earlier jboss versions. Is this intentional? I had thought we would continue supporting earlier versions and use profiles for deployments.
Hi Oved, After rebasing our POC code with upstream, I tried to follow the below steps for moving to JBoss AS7. Since a newer version of JBoss (CR1) is available, I downloaded that instead of Beta1 assuming that it will be more stable and will contain mostly bug-fixes and hence should work. However it turns out that the format of standalone.xml itself has changed and that created/modified by our "deploy" profile doesn't work. I had to download the "Beta1" tarball to get the deployment to work. This is just FYI. Please ignore in case you are already aware of this :) Thanks, Shireesh -------- Original Message -------- Subject: Re: [Engine-devel] Moving to Jboss AS7 Date: Sun, 15 Jan 2012 04:05:33 -0500 (EST) From: Oved Ourfalli <ovedo@redhat.com> To: engine-devel@ovirt.org Hey all, The patches are now pushed! So please, if you fetch from now on you'll have to perform the actions below. The wiki was updated as well. Short list of steps: 1. Download jboss 7.1.0 Beta1b (wget http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh A more descriptive set of steps and notes can be found in my previous E-mail below. I'm here if you need any help. Thank you, Oved ----- Original Message -----
From: "Oved Ourfalli"<ovedo@redhat.com> To: engine-devel@ovirt.org Sent: Wednesday, January 11, 2012 2:57:19 PM Subject: Moving to Jboss AS7
Hey all,
The code changes required to make the engine work on Jboss AS7 will soon be push It will, of course, require you to install it, and start working with it :-)
A separate E-mail will be sent to notify you all once pushed, and then you'll have to perform the following steps:
1. Download jboss 7.1.0 Beta1b (http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) - There is a newer version, but it has issues in the REST-API, so we decided to work with the beta version until a proper fix will be released. 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh 6. Look inside the JBOSS_HOME/bin/standalone.conf file in order to enable jboss debugging (just uncomment the line JAVA_OPTS="$JAVA_OPTS -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n") 7. If you have a krb5.conf file you are working with, put it in JBOSS_HOME/standalone/configuration directory 8. Run Jboss (and be impressed by the startup speed!)
The above will be also added to the wiki page for building the engine as soon as the patches will be pushed upstream.
Some facts about Jboss 7: 1. It supports both standalone deployment, and domain deployment. We use the standalone one. 2. Stuff related to the standalone mode can be found in the JBOSS_HOME/standalone directory: * configuration - contains the main configuration file called standalone.xml file, plus some other configuration files * deployments - that's where your deployments should be. When adding a new one, don't forget to create a file called "<deployment-name>.dodeploy" in order to make it deploy. * log - that's where the log files are written (unless stated differently in the standalone.xml file). 3. The different modules that come with Jboss 7 are located in JBOSS_HOME/modules directory * No more common/lib directory. * Every module has a module.xml file which contains it's dependencies in other modules, the jars that are part of the module, and etc. * In order to use a dependency from there you have to add "Dependencies" section to your manifest file (do git grep "Dependencies" to take a look at some examples done in the engine source code). 4. Useful links: * Documentation - https://docs.jboss.org/author/display/AS7/Documentation * Class loading changes - https://docs.jboss.org/author/display/AS7/Class+Loading+in+AS7 * The Jboss community - http://community.jboss.org/wiki
Please send issues/feedback to this mailing list.
Thank you all, Oved
Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
Hey, Yes, I'm aware of that issue. The reason we chose to work with Beta1b is due to several regressions in resteasy 2.3.1 (Beta1b ships with resteasy 2.2.3). In the next AS version those issues are supposed to be fixed, and then we'll work with it upstream. If you are curios in understanding the standalone.xml changes you can take a look at this patch: http://gerrit.ovirt.org/#change,715 It contains both changes in standalone.xml, and removal of the jboss naming jar from our repo (it was there due to an issue in LDAP on beta1b, that was fixed in CR1b). Thank you, Oved ----- Original Message -----
From: "Shireesh Anjal" <sanjal@redhat.com> To: "Oved Ourfalli" <oourfali@redhat.com>, engine-devel@ovirt.org Cc: rhev-gluster@redhat.com Sent: Monday, February 6, 2012 5:06:23 PM Subject: Fwd: Re: [Engine-devel] Moving to Jboss AS7
Hi Oved,
After rebasing our POC code with upstream, I tried to follow the below steps for moving to JBoss AS7. Since a newer version of JBoss (CR1) is available, I downloaded that instead of Beta1 assuming that it will be more stable and will contain mostly bug-fixes and hence should work.
However it turns out that the format of standalone.xml itself has changed and that created/modified by our "deploy" profile doesn't work. I had to download the "Beta1" tarball to get the deployment to work.
This is just FYI. Please ignore in case you are already aware of this :)
Thanks, Shireesh
-------- Original Message -------- Subject: Re: [Engine-devel] Moving to Jboss AS7 Date: Sun, 15 Jan 2012 04:05:33 -0500 (EST) From: Oved Ourfalli <ovedo@redhat.com> To: engine-devel@ovirt.org
Hey all, The patches are now pushed!
So please, if you fetch from now on you'll have to perform the actions below. The wiki was updated as well.
Short list of steps: 1. Download jboss 7.1.0 Beta1b (wget http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh
A more descriptive set of steps and notes can be found in my previous E-mail below.
I'm here if you need any help.
Thank you, Oved
----- Original Message -----
From: "Oved Ourfalli"<ovedo@redhat.com> To: engine-devel@ovirt.org Sent: Wednesday, January 11, 2012 2:57:19 PM Subject: Moving to Jboss AS7
Hey all,
The code changes required to make the engine work on Jboss AS7 will soon be push It will, of course, require you to install it, and start working with it :-)
A separate E-mail will be sent to notify you all once pushed, and then you'll have to perform the following steps:
1. Download jboss 7.1.0 Beta1b (http://download.jboss.org/jbossas/7.1/jboss-as-7.1.0.Beta1b/jboss-as-7.1.0.B...) - There is a newer version, but it has issues in the REST-API, so we decided to work with the beta version until a proper fix will be released. 2. Fetch the latest changes from our git repository 3. Change the Jboss home to the new path, both in the JBOSS_HOME environment variable, and in maven settings file (~/.m2/settings.xml) 4. Build the engine, with profiles "dep" and "setup". This will put all the proper configuration files, postgresql driver and make all the other needed changes in Jboss in order to make it work properly mvn clean install -Psetup,dep ....... 5. In order to run Jboss go to JBOSS_HOME/bin and run ./standalone.sh 6. Look inside the JBOSS_HOME/bin/standalone.conf file in order to enable jboss debugging (just uncomment the line JAVA_OPTS="$JAVA_OPTS -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n") 7. If you have a krb5.conf file you are working with, put it in JBOSS_HOME/standalone/configuration directory 8. Run Jboss (and be impressed by the startup speed!)
The above will be also added to the wiki page for building the engine as soon as the patches will be pushed upstream.
Some facts about Jboss 7: 1. It supports both standalone deployment, and domain deployment. We use the standalone one. 2. Stuff related to the standalone mode can be found in the JBOSS_HOME/standalone directory: * configuration - contains the main configuration file called standalone.xml file, plus some other configuration files * deployments - that's where your deployments should be. When adding a new one, don't forget to create a file called "<deployment-name>.dodeploy" in order to make it deploy. * log - that's where the log files are written (unless stated differently in the standalone.xml file). 3. The different modules that come with Jboss 7 are located in JBOSS_HOME/modules directory * No more common/lib directory. * Every module has a module.xml file which contains it's dependencies in other modules, the jars that are part of the module, and etc. * In order to use a dependency from there you have to add "Dependencies" section to your manifest file (do git grep "Dependencies" to take a look at some examples done in the engine source code). 4. Useful links: * Documentation - https://docs.jboss.org/author/display/AS7/Documentation * Class loading changes - https://docs.jboss.org/author/display/AS7/Class+Loading+in+AS7 * The Jboss community - http://community.jboss.org/wiki
Please send issues/feedback to this mailing list.
Thank you all, Oved
Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
participants (4)
-
Jon Choate -
Oved Ourfalli -
Shireesh Anjal -
Yair Zaslavsky