9:13 a.m.
Hi all!
On Monday, June 22nd, 11:00 CET, we plan to drop JBoss 7.1 support in oVirt 3.6 and move
to Jboss WildFly 8.2
(we're still doing final verifications, but it looks promising).
This will allow us to support Fedora 22 properly, and in future versions to leverage some
new and cool features.
In addition, Jboss WildFly 8.2 works with OpenJDK 1.8 so you can easily use it for
development on newer distributions where OpenJDK 1.7 is not available (Fedora 21 and 22,
for example).
When the patch [1] is merged, you will need WildFly 8.2 to be able to develop
oVirt engine 3.6. Please use following guideline and update your development
environment:
I. Using WildFly 8.2 for oVirt 3.6 development
1. Enable ovirt-master-snapshot-static repository on your development machine
[ovirt-master-snapshot-static]
name=Latest oVirt master additional nightly snapshot
baseurl=http://resources.ovirt.org/pub/ovirt-master-snapshot-static/rpm/@...
enabled=1
skip_if_unavailable=1
gpgcheck=0
Please replace "@DIST@" with "fc" for Fedora or "el" for
Centos/RHEL
2. Install WildFly packages:
yum install ovirt-engine-wildfly ovirt-engine-wildfly-overlay
3. Rebase your patches and build oVirt engine (assuming "~/ovirt-engine" as
destination)
make install-dev
5. Setup WildFly overlay (assuming "~/ovirt-engine" as destination)
echo
"ENGINE_JAVA_MODULEPATH=\"/usr/share/ovirt-engine-wildfly-overlay/modules:\${ENGINE_JAVA_MODULEPATH}\""
\
~/ovirt-engine/etc/ovirt-engine/engine.conf.d/20-setup-jboss-overlay.conf
6. Execute setup
cd ~/ovirt-engine
./bin/engine-setup
7. Start engine service
cd ~/ovirt-engine
./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
II. Using JBoss 7.1.1 for 3.5 environment
Using JBoss 7.1.1 on 3.5 is still possible, by doing the following:
1. Install JBoss 7.1.1 RPM from ovirt-master-snapshot-static repo using
yum install ovirt-engine-jboss-as
2. Build oVirt engine 3.5 with your backported feature (assuming
"~/ovirt-engine" as destination)
make install-dev
3. Execute setup
cd ~/ovirt-engine
./bin/engine-setup--jboss-home=/usr/share/ovirt-engine-jboss-as
4. Start engine service
cd ~/ovirt-engine
./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
Once merged, we will send an E-mail to make sure you're all aware, and that you can do
the steps described above.
We're here for any issue you might have (specifically Martin who is responsible for
this effort, and myself).
Don't hesitate to contact us for any issue, either by mail or irc (mperina or oved).
Regards,
Oved
[1] https://gerrit.ovirt.org/40152
3:19 p.m.
On 06/18/2015 09:13 AM, Oved Ourfali wrote:
Hi all!
On Monday, June 22nd, 11:00 CET, we plan to drop JBoss 7.1 support in oVirt 3.6 and move
to Jboss WildFly 8.2
(we're still doing final verifications, but it looks promising).
This will allow us to support Fedora 22 properly, and in future versions to leverage some
new and cool features.
In addition, Jboss WildFly 8.2 works with OpenJDK 1.8 so you can easily use it for
development on newer distributions where OpenJDK 1.7 is not available (Fedora 21 and 22,
for example).
May need a separate thread for that, but we will be able to code using
JDK 8. its about time. jdk 8 was out April 2014.
When the patch [1] is merged, you will need WildFly 8.2 to be able to develop
oVirt engine 3.6. Please use following guideline and update your development
environment:
I. Using WildFly 8.2 for oVirt 3.6 development
1. Enable ovirt-master-snapshot-static repository on your development machine
[ovirt-master-snapshot-static]
name=Latest oVirt master additional nightly snapshot
baseurl=http://resources.ovirt.org/pub/ovirt-master-snapshot-static/rpm/@...
enabled=1
skip_if_unavailable=1
gpgcheck=0
Please replace "@DIST@" with "fc" for Fedora or "el"
for Centos/RHEL
2. Install WildFly packages:
yum install ovirt-engine-wildfly ovirt-engine-wildfly-overlay
3. Rebase your patches and build oVirt engine (assuming "~/ovirt-engine" as
destination)
make install-dev
5. Setup WildFly overlay (assuming "~/ovirt-engine" as destination)
echo
"ENGINE_JAVA_MODULEPATH=\"/usr/share/ovirt-engine-wildfly-overlay/modules:\${ENGINE_JAVA_MODULEPATH}\""
\
>
~/ovirt-engine/etc/ovirt-engine/engine.conf.d/20-setup-jboss-overlay.conf
6. Execute setup
cd ~/ovirt-engine
./bin/engine-setup
7. Start engine service
cd ~/ovirt-engine
./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
II. Using JBoss 7.1.1 for 3.5 environment
why would anyone want to do that?
Using JBoss 7.1.1 on 3.5 is still possible, by doing the following:
1. Install JBoss 7.1.1 RPM from ovirt-master-snapshot-static repo using
yum install ovirt-engine-jboss-as
2. Build oVirt engine 3.5 with your backported feature (assuming
"~/ovirt-engine" as destination)
make install-dev
3. Execute setup
cd ~/ovirt-engine
./bin/engine-setup--jboss-home=/usr/share/ovirt-engine-jboss-as
4. Start engine service
cd ~/ovirt-engine
./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
Once merged, we will send an E-mail to make sure you're all aware, and that you can
do the steps described above.
We're here for any issue you might have (specifically Martin who is responsible for
this effort, and myself).
Don't hesitate to contact us for any issue, either by mail or irc (mperina or oved).
Regards,
Oved
[1] https://gerrit.ovirt.org/40152
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
3:21 p.m.
----- Original Message -----
From: "Roy Golan" <rgolan(a)redhat.com>
To: "Oved Ourfali" <ovedo(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Sunday, June 21, 2015 3:19:28 PM
Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday, June 22nd
On 06/18/2015 09:13 AM, Oved Ourfali wrote:
> Hi all!
>
> On Monday, June 22nd, 11:00 CET, we plan to drop JBoss 7.1 support in oVirt
> 3.6 and move to Jboss WildFly 8.2
> (we're still doing final verifications, but it looks promising).
>
> This will allow us to support Fedora 22 properly, and in future versions to
> leverage some new and cool features.
>
> In addition, Jboss WildFly 8.2 works with OpenJDK 1.8 so you can easily use
> it for
> development on newer distributions where OpenJDK 1.7 is not available
> (Fedora 21 and 22, for example).
May need a separate thread for that, but we will be able to code using
JDK 8. its about time. jdk 8 was out April 2014.
We will still work with JDK7 for downstream.
>
> When the patch [1] is merged, you will need WildFly 8.2 to be able to
> develop
> oVirt engine 3.6. Please use following guideline and update your
> development
> environment:
>
> I. Using WildFly 8.2 for oVirt 3.6 development
>
> 1. Enable ovirt-master-snapshot-static repository on your development
> machine
> [ovirt-master-snapshot-static]
> name=Latest oVirt master additional nightly snapshot
>
baseurl=http://resources.ovirt.org/pub/ovirt-master-snapshot-static/rpm/@...
> enabled=1
> skip_if_unavailable=1
> gpgcheck=0
>
> Please replace "@DIST@" with "fc" for Fedora or
"el" for Centos/RHEL
>
> 2. Install WildFly packages:
> yum install ovirt-engine-wildfly ovirt-engine-wildfly-overlay
>
> 3. Rebase your patches and build oVirt engine (assuming
"~/ovirt-engine"
> as
> destination)
> make install-dev
>
> 5. Setup WildFly overlay (assuming "~/ovirt-engine" as destination)
> echo
>
"ENGINE_JAVA_MODULEPATH=\"/usr/share/ovirt-engine-wildfly-overlay/modules:\${ENGINE_JAVA_MODULEPATH}\""
> \
> >
~/ovirt-engine/etc/ovirt-engine/engine.conf.d/20-setup-jboss-overlay.conf
>
> 6. Execute setup
> cd ~/ovirt-engine
> ./bin/engine-setup
>
> 7. Start engine service
> cd ~/ovirt-engine
> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
>
>
> II. Using JBoss 7.1.1 for 3.5 environment
why would anyone want to do that?
Bugs!
>
> Using JBoss 7.1.1 on 3.5 is still possible, by doing the following:
>
> 1. Install JBoss 7.1.1 RPM from ovirt-master-snapshot-static repo using
> yum install ovirt-engine-jboss-as
>
> 2. Build oVirt engine 3.5 with your backported feature (assuming
> "~/ovirt-engine" as destination)
> make install-dev
>
> 3. Execute setup
> cd ~/ovirt-engine
> ./bin/engine-setup--jboss-home=/usr/share/ovirt-engine-jboss-as
>
> 4. Start engine service
> cd ~/ovirt-engine
> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
>
> Once merged, we will send an E-mail to make sure you're all aware, and that
> you can do the steps described above.
>
> We're here for any issue you might have (specifically Martin who is
> responsible for this effort, and myself).
> Don't hesitate to contact us for any issue, either by mail or irc (mperina
> or oved).
>
> Regards,
> Oved
>
> [1] https://gerrit.ovirt.org/40152
> _______________________________________________
> Devel mailing list
> Devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/devel
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
4:05 p.m.
On 06/21/2015 03:21 PM, Oved Ourfali wrote:
----- Original Message -----
> From: "Roy Golan" <rgolan(a)redhat.com>
> To: "Oved Ourfali" <ovedo(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Sunday, June 21, 2015 3:19:28 PM
> Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday, June 22nd
>
> On 06/18/2015 09:13 AM, Oved Ourfali wrote:
>> Hi all!
>>
>> On Monday, June 22nd, 11:00 CET, we plan to drop JBoss 7.1 support in oVirt
>> 3.6 and move to Jboss WildFly 8.2
>> (we're still doing final verifications, but it looks promising).
>>
>> This will allow us to support Fedora 22 properly, and in future versions to
>> leverage some new and cool features.
>>
>> In addition, Jboss WildFly 8.2 works with OpenJDK 1.8 so you can easily use
>> it for
>> development on newer distributions where OpenJDK 1.7 is not available
>> (Fedora 21 and 22, for example).
> May need a separate thread for that, but we will be able to code using
> JDK 8. its about time. jdk 8 was out April 2014.
>
We will still work with JDK7 for downstream.
this should go on a separate thread :)
>> When the patch [1] is merged, you will need WildFly 8.2 to be able to
>> develop
>> oVirt engine 3.6. Please use following guideline and update your
>> development
>> environment:
>>
>> I. Using WildFly 8.2 for oVirt 3.6 development
>>
>> 1. Enable ovirt-master-snapshot-static repository on your development
>> machine
>> [ovirt-master-snapshot-static]
>> name=Latest oVirt master additional nightly snapshot
>>
baseurl=http://resources.ovirt.org/pub/ovirt-master-snapshot-static/rpm/@...
>> enabled=1
>> skip_if_unavailable=1
>> gpgcheck=0
>>
>> Please replace "@DIST@" with "fc" for Fedora or
"el" for Centos/RHEL
>>
>> 2. Install WildFly packages:
>> yum install ovirt-engine-wildfly ovirt-engine-wildfly-overlay
>>
>> 3. Rebase your patches and build oVirt engine (assuming
"~/ovirt-engine"
>> as
>> destination)
>> make install-dev
>>
>> 5. Setup WildFly overlay (assuming "~/ovirt-engine" as destination)
>> echo
>>
"ENGINE_JAVA_MODULEPATH=\"/usr/share/ovirt-engine-wildfly-overlay/modules:\${ENGINE_JAVA_MODULEPATH}\""
>> \
>> >
~/ovirt-engine/etc/ovirt-engine/engine.conf.d/20-setup-jboss-overlay.conf
>>
>> 6. Execute setup
>> cd ~/ovirt-engine
>> ./bin/engine-setup
>>
>> 7. Start engine service
>> cd ~/ovirt-engine
>> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
>>
>>
>> II. Using JBoss 7.1.1 for 3.5 environment
> why would anyone want to do that?
>
Bugs!
only for out (last?) z stream which will be 3.5.4. other then that, its
really the end.
>> Using JBoss 7.1.1 on 3.5 is still possible, by doing the following:
>>
>> 1. Install JBoss 7.1.1 RPM from ovirt-master-snapshot-static repo using
>> yum install ovirt-engine-jboss-as
>>
>> 2. Build oVirt engine 3.5 with your backported feature (assuming
>> "~/ovirt-engine" as destination)
>> make install-dev
>>
>> 3. Execute setup
>> cd ~/ovirt-engine
>> ./bin/engine-setup--jboss-home=/usr/share/ovirt-engine-jboss-as
>>
>> 4. Start engine service
>> cd ~/ovirt-engine
>> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
>>
>> Once merged, we will send an E-mail to make sure you're all aware, and that
>> you can do the steps described above.
>>
>> We're here for any issue you might have (specifically Martin who is
>> responsible for this effort, and myself).
>> Don't hesitate to contact us for any issue, either by mail or irc (mperina
>> or oved).
>>
>> Regards,
>> Oved
>>
>> [1] https://gerrit.ovirt.org/40152
>> _______________________________________________
>> Devel mailing list
>> Devel(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/devel
> _______________________________________________
> Devel mailing list
> Devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/devel
>
4:24 p.m.
----- Original Message -----
From: "Roy Golan" <rgolan(a)redhat.com>
To: "Oved Ourfali" <ovedo(a)redhat.com>
Cc: "devel" <devel(a)ovirt.org>
Sent: Sunday, June 21, 2015 4:05:13 PM
Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday, June 22nd
On 06/21/2015 03:21 PM, Oved Ourfali wrote:
>
> ----- Original Message -----
>> From: "Roy Golan" <rgolan(a)redhat.com>
>> To: "Oved Ourfali" <ovedo(a)redhat.com>, "devel"
<devel(a)ovirt.org>
>> Sent: Sunday, June 21, 2015 3:19:28 PM
>> Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday,
>> June 22nd
>>
>> On 06/18/2015 09:13 AM, Oved Ourfali wrote:
>>> Hi all!
>>>
>>> On Monday, June 22nd, 11:00 CET, we plan to drop JBoss 7.1 support in
>>> oVirt
>>> 3.6 and move to Jboss WildFly 8.2
>>> (we're still doing final verifications, but it looks promising).
>>>
>>> This will allow us to support Fedora 22 properly, and in future versions
>>> to
>>> leverage some new and cool features.
>>>
>>> In addition, Jboss WildFly 8.2 works with OpenJDK 1.8 so you can easily
>>> use
>>> it for
>>> development on newer distributions where OpenJDK 1.7 is not available
>>> (Fedora 21 and 22, for example).
>> May need a separate thread for that, but we will be able to code using
>> JDK 8. its about time. jdk 8 was out April 2014.
>>
> We will still work with JDK7 for downstream.
this should go on a separate thread :)
>
>>> When the patch [1] is merged, you will need WildFly 8.2 to be able to
>>> develop
>>> oVirt engine 3.6. Please use following guideline and update your
>>> development
>>> environment:
>>>
>>> I. Using WildFly 8.2 for oVirt 3.6 development
>>>
>>> 1. Enable ovirt-master-snapshot-static repository on your development
>>> machine
>>> [ovirt-master-snapshot-static]
>>> name=Latest oVirt master additional nightly snapshot
>>>
baseurl=http://resources.ovirt.org/pub/ovirt-master-snapshot-static/rpm/@...
>>> enabled=1
>>> skip_if_unavailable=1
>>> gpgcheck=0
>>>
>>> Please replace "@DIST@" with "fc" for Fedora or
"el" for
>>> Centos/RHEL
>>>
>>> 2. Install WildFly packages:
>>> yum install ovirt-engine-wildfly ovirt-engine-wildfly-overlay
>>>
>>> 3. Rebase your patches and build oVirt engine (assuming
>>> "~/ovirt-engine"
>>> as
>>> destination)
>>> make install-dev
>>>
>>> 5. Setup WildFly overlay (assuming "~/ovirt-engine" as
destination)
>>> echo
>>>
"ENGINE_JAVA_MODULEPATH=\"/usr/share/ovirt-engine-wildfly-overlay/modules:\${ENGINE_JAVA_MODULEPATH}\""
>>> \
>>> >
~/ovirt-engine/etc/ovirt-engine/engine.conf.d/20-setup-jboss-overlay.conf
>>>
>>> 6. Execute setup
>>> cd ~/ovirt-engine
>>> ./bin/engine-setup
>>>
>>> 7. Start engine service
>>> cd ~/ovirt-engine
>>> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
>>>
>>>
>>> II. Using JBoss 7.1.1 for 3.5 environment
>> why would anyone want to do that?
>>
> Bugs!
only for out (last?) z stream which will be 3.5.4. other then that, its
really the end.
>
We might also have 3.5.5.
>>> Using JBoss 7.1.1 on 3.5 is still possible, by doing
the following:
>>>
>>> 1. Install JBoss 7.1.1 RPM from ovirt-master-snapshot-static repo
>>> using
>>> yum install ovirt-engine-jboss-as
>>>
>>> 2. Build oVirt engine 3.5 with your backported feature (assuming
>>> "~/ovirt-engine" as destination)
>>> make install-dev
>>>
>>> 3. Execute setup
>>> cd ~/ovirt-engine
>>> ./bin/engine-setup--jboss-home=/usr/share/ovirt-engine-jboss-as
>>>
>>> 4. Start engine service
>>> cd ~/ovirt-engine
>>> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py start
>>>
>>> Once merged, we will send an E-mail to make sure you're all aware, and
>>> that
>>> you can do the steps described above.
>>>
>>> We're here for any issue you might have (specifically Martin who is
>>> responsible for this effort, and myself).
>>> Don't hesitate to contact us for any issue, either by mail or irc
>>> (mperina
>>> or oved).
>>>
>>> Regards,
>>> Oved
>>>
>>> [1] https://gerrit.ovirt.org/40152
>>> _______________________________________________
>>> Devel mailing list
>>> Devel(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/devel
>> _______________________________________________
>> Devel mailing list
>> Devel(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/devel
>>
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
11:14 a.m.
New subject: [IMPORTANT] Re: Move to Jboss Wildfly - planned for Monday, June 22nd
top-posting:
Running more in-depth tests, we found out that there is an issue with matrix parameters in
the REST-API (see [1] for more details).
We are now trying to understand the cause for these issue, and also check whether there is
a workaround or not.
If we won't resolve it soon we'll have to postpone the move to Wildfly until this
gets resolved.
I'll keep you all posted.
Regards,
Oved
[1] For example, asking for only 2 VMs can be done via using the following resource URL
http://engine:port/ovirt-engine/api/vms;max=2
----- Original Message -----
From: "Oved Ourfali" <ovedo(a)redhat.com>
To: "Roy Golan" <rgolan(a)redhat.com>
Cc: "devel" <devel(a)ovirt.org>
Sent: Sunday, June 21, 2015 4:24:38 PM
Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday, June 22nd
----- Original Message -----
> From: "Roy Golan" <rgolan(a)redhat.com>
> To: "Oved Ourfali" <ovedo(a)redhat.com>
> Cc: "devel" <devel(a)ovirt.org>
> Sent: Sunday, June 21, 2015 4:05:13 PM
> Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday, June
> 22nd
>
> On 06/21/2015 03:21 PM, Oved Ourfali wrote:
> >
> > ----- Original Message -----
> >> From: "Roy Golan" <rgolan(a)redhat.com>
> >> To: "Oved Ourfali" <ovedo(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> >> Sent: Sunday, June 21, 2015 3:19:28 PM
> >> Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday,
> >> June 22nd
> >>
> >> On 06/18/2015 09:13 AM, Oved Ourfali wrote:
> >>> Hi all!
> >>>
> >>> On Monday, June 22nd, 11:00 CET, we plan to drop JBoss 7.1 support in
> >>> oVirt
> >>> 3.6 and move to Jboss WildFly 8.2
> >>> (we're still doing final verifications, but it looks promising).
> >>>
> >>> This will allow us to support Fedora 22 properly, and in future
> >>> versions
> >>> to
> >>> leverage some new and cool features.
> >>>
> >>> In addition, Jboss WildFly 8.2 works with OpenJDK 1.8 so you can
easily
> >>> use
> >>> it for
> >>> development on newer distributions where OpenJDK 1.7 is not available
> >>> (Fedora 21 and 22, for example).
> >> May need a separate thread for that, but we will be able to code using
> >> JDK 8. its about time. jdk 8 was out April 2014.
> >>
> > We will still work with JDK7 for downstream.
>
> this should go on a separate thread :)
> >
> >>> When the patch [1] is merged, you will need WildFly 8.2 to be able to
> >>> develop
> >>> oVirt engine 3.6. Please use following guideline and update your
> >>> development
> >>> environment:
> >>>
> >>> I. Using WildFly 8.2 for oVirt 3.6 development
> >>>
> >>> 1. Enable ovirt-master-snapshot-static repository on your
> >>> development
> >>> machine
> >>> [ovirt-master-snapshot-static]
> >>> name=Latest oVirt master additional nightly snapshot
> >>>
baseurl=http://resources.ovirt.org/pub/ovirt-master-snapshot-static/rpm/@...
> >>> enabled=1
> >>> skip_if_unavailable=1
> >>> gpgcheck=0
> >>>
> >>> Please replace "@DIST@" with "fc" for Fedora
or "el" for
> >>> Centos/RHEL
> >>>
> >>> 2. Install WildFly packages:
> >>> yum install ovirt-engine-wildfly ovirt-engine-wildfly-overlay
> >>>
> >>> 3. Rebase your patches and build oVirt engine (assuming
> >>> "~/ovirt-engine"
> >>> as
> >>> destination)
> >>> make install-dev
> >>>
> >>> 5. Setup WildFly overlay (assuming "~/ovirt-engine" as
destination)
> >>> echo
> >>>
"ENGINE_JAVA_MODULEPATH=\"/usr/share/ovirt-engine-wildfly-overlay/modules:\${ENGINE_JAVA_MODULEPATH}\""
> >>> \
> >>> >
~/ovirt-engine/etc/ovirt-engine/engine.conf.d/20-setup-jboss-overlay.conf
> >>>
> >>> 6. Execute setup
> >>> cd ~/ovirt-engine
> >>> ./bin/engine-setup
> >>>
> >>> 7. Start engine service
> >>> cd ~/ovirt-engine
> >>> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
> >>> start
> >>>
> >>>
> >>> II. Using JBoss 7.1.1 for 3.5 environment
> >> why would anyone want to do that?
> >>
> > Bugs!
>
> only for out (last?) z stream which will be 3.5.4. other then that, its
> really the end.
> >
We might also have 3.5.5.
> >>> Using JBoss 7.1.1 on 3.5 is still possible, by doing the following:
> >>>
> >>> 1. Install JBoss 7.1.1 RPM from ovirt-master-snapshot-static repo
> >>> using
> >>> yum install ovirt-engine-jboss-as
> >>>
> >>> 2. Build oVirt engine 3.5 with your backported feature (assuming
> >>> "~/ovirt-engine" as destination)
> >>> make install-dev
> >>>
> >>> 3. Execute setup
> >>> cd ~/ovirt-engine
> >>>
./bin/engine-setup--jboss-home=/usr/share/ovirt-engine-jboss-as
> >>>
> >>> 4. Start engine service
> >>> cd ~/ovirt-engine
> >>> ./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
> >>> start
> >>>
> >>> Once merged, we will send an E-mail to make sure you're all aware,
and
> >>> that
> >>> you can do the steps described above.
> >>>
> >>> We're here for any issue you might have (specifically Martin who
is
> >>> responsible for this effort, and myself).
> >>> Don't hesitate to contact us for any issue, either by mail or irc
> >>> (mperina
> >>> or oved).
> >>>
> >>> Regards,
> >>> Oved
> >>>
> >>> [1] https://gerrit.ovirt.org/40152
> >>> _______________________________________________
> >>> Devel mailing list
> >>> Devel(a)ovirt.org
> >>> http://lists.ovirt.org/mailman/listinfo/devel
> >> _______________________________________________
> >> Devel mailing list
> >> Devel(a)ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/devel
> >>
>
> _______________________________________________
> Devel mailing list
> Devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/devel
>
>
>
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
4:55 p.m.
New subject: [IMPORTANT] Re: Move to Jboss Wildfly - planned for Monday, June 22nd
Hi,
we were able to resolve all known issues with oVirt engine running
on WildFly 8.2. So we are going to merge WildFly related patches
for engine
TOMORROW JUNE 24th, 9:30 CEST
We will send email when all patches are merged but please make
preparations for your development environment described below
(here's link [1] to list archive).
Don't hesitate to contact me if you have any issues.
Thanks
Martin Perina
[1] http://lists.ovirt.org/pipermail/devel/2015-June/010832.html
----- Original Message -----
From: "Oved Ourfali" <ovedo(a)redhat.com>
To: "devel" <devel(a)ovirt.org>
Sent: Monday, June 22, 2015 10:14:32 AM
Subject: [ovirt-devel] [IMPORTANT] Re: Move to Jboss Wildfly - planned for Monday, June
22nd
top-posting:
Running more in-depth tests, we found out that there is an issue with matrix
parameters in the REST-API (see [1] for more details).
We are now trying to understand the cause for these issue, and also check
whether there is a workaround or not.
If we won't resolve it soon we'll have to postpone the move to Wildfly until
this gets resolved.
I'll keep you all posted.
Regards,
Oved
[1] For example, asking for only 2 VMs can be done via using the following
resource URL
http://engine:port/ovirt-engine/api/vms;max=2
----- Original Message -----
> From: "Oved Ourfali" <ovedo(a)redhat.com>
> To: "Roy Golan" <rgolan(a)redhat.com>
> Cc: "devel" <devel(a)ovirt.org>
> Sent: Sunday, June 21, 2015 4:24:38 PM
> Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday, June
> 22nd
>
>
>
> ----- Original Message -----
> > From: "Roy Golan" <rgolan(a)redhat.com>
> > To: "Oved Ourfali" <ovedo(a)redhat.com>
> > Cc: "devel" <devel(a)ovirt.org>
> > Sent: Sunday, June 21, 2015 4:05:13 PM
> > Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for Monday,
> > June
> > 22nd
> >
> > On 06/21/2015 03:21 PM, Oved Ourfali wrote:
> > >
> > > ----- Original Message -----
> > >> From: "Roy Golan" <rgolan(a)redhat.com>
> > >> To: "Oved Ourfali" <ovedo(a)redhat.com>,
"devel" <devel(a)ovirt.org>
> > >> Sent: Sunday, June 21, 2015 3:19:28 PM
> > >> Subject: Re: [ovirt-devel] Move to Jboss Wildfly - planned for
Monday,
> > >> June 22nd
> > >>
> > >> On 06/18/2015 09:13 AM, Oved Ourfali wrote:
> > >>> Hi all!
> > >>>
> > >>> On Monday, June 22nd, 11:00 CET, we plan to drop JBoss 7.1 support
in
> > >>> oVirt
> > >>> 3.6 and move to Jboss WildFly 8.2
> > >>> (we're still doing final verifications, but it looks
promising).
> > >>>
> > >>> This will allow us to support Fedora 22 properly, and in future
> > >>> versions
> > >>> to
> > >>> leverage some new and cool features.
> > >>>
> > >>> In addition, Jboss WildFly 8.2 works with OpenJDK 1.8 so you can
> > >>> easily
> > >>> use
> > >>> it for
> > >>> development on newer distributions where OpenJDK 1.7 is not
available
> > >>> (Fedora 21 and 22, for example).
> > >> May need a separate thread for that, but we will be able to code
using
> > >> JDK 8. its about time. jdk 8 was out April 2014.
> > >>
> > > We will still work with JDK7 for downstream.
> >
> > this should go on a separate thread :)
> > >
> > >>> When the patch [1] is merged, you will need WildFly 8.2 to be able
to
> > >>> develop
> > >>> oVirt engine 3.6. Please use following guideline and update your
> > >>> development
> > >>> environment:
> > >>>
> > >>> I. Using WildFly 8.2 for oVirt 3.6 development
> > >>>
> > >>> 1. Enable ovirt-master-snapshot-static repository on your
> > >>> development
> > >>> machine
> > >>> [ovirt-master-snapshot-static]
> > >>> name=Latest oVirt master additional nightly snapshot
> > >>>
baseurl=http://resources.ovirt.org/pub/ovirt-master-snapshot-static/rpm/@...
> > >>> enabled=1
> > >>> skip_if_unavailable=1
> > >>> gpgcheck=0
> > >>>
> > >>> Please replace "@DIST@" with "fc" for
Fedora or "el" for
> > >>> Centos/RHEL
> > >>>
> > >>> 2. Install WildFly packages:
> > >>> yum install ovirt-engine-wildfly
ovirt-engine-wildfly-overlay
> > >>>
> > >>> 3. Rebase your patches and build oVirt engine (assuming
> > >>> "~/ovirt-engine"
> > >>> as
> > >>> destination)
> > >>> make install-dev
> > >>>
> > >>> 5. Setup WildFly overlay (assuming "~/ovirt-engine"
as
> > >>> destination)
> > >>> echo
> > >>>
"ENGINE_JAVA_MODULEPATH=\"/usr/share/ovirt-engine-wildfly-overlay/modules:\${ENGINE_JAVA_MODULEPATH}\""
> > >>> \
> > >>> >
~/ovirt-engine/etc/ovirt-engine/engine.conf.d/20-setup-jboss-overlay.conf
> > >>>
> > >>> 6. Execute setup
> > >>> cd ~/ovirt-engine
> > >>> ./bin/engine-setup
> > >>>
> > >>> 7. Start engine service
> > >>> cd ~/ovirt-engine
> > >>>
./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
> > >>> start
> > >>>
> > >>>
> > >>> II. Using JBoss 7.1.1 for 3.5 environment
> > >> why would anyone want to do that?
> > >>
> > > Bugs!
> >
> > only for out (last?) z stream which will be 3.5.4. other then that, its
> > really the end.
> > >
>
> We might also have 3.5.5.
>
> > >>> Using JBoss 7.1.1 on 3.5 is still possible, by doing the
> > >>> following:
> > >>>
> > >>> 1. Install JBoss 7.1.1 RPM from ovirt-master-snapshot-static
repo
> > >>> using
> > >>> yum install ovirt-engine-jboss-as
> > >>>
> > >>> 2. Build oVirt engine 3.5 with your backported feature
(assuming
> > >>> "~/ovirt-engine" as destination)
> > >>> make install-dev
> > >>>
> > >>> 3. Execute setup
> > >>> cd ~/ovirt-engine
> > >>>
./bin/engine-setup--jboss-home=/usr/share/ovirt-engine-jboss-as
> > >>>
> > >>> 4. Start engine service
> > >>> cd ~/ovirt-engine
> > >>>
./share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
> > >>> start
> > >>>
> > >>> Once merged, we will send an E-mail to make sure you're all
aware,
> > >>> and
> > >>> that
> > >>> you can do the steps described above.
> > >>>
> > >>> We're here for any issue you might have (specifically Martin
who is
> > >>> responsible for this effort, and myself).
> > >>> Don't hesitate to contact us for any issue, either by mail or
irc
> > >>> (mperina
> > >>> or oved).
> > >>>
> > >>> Regards,
> > >>> Oved
> > >>>
> > >>> [1] https://gerrit.ovirt.org/40152
> > >>> _______________________________________________
> > >>> Devel mailing list
> > >>> Devel(a)ovirt.org
> > >>> http://lists.ovirt.org/mailman/listinfo/devel
> > >> _______________________________________________
> > >> Devel mailing list
> > >> Devel(a)ovirt.org
> > >> http://lists.ovirt.org/mailman/listinfo/devel
> > >>
> >
> > _______________________________________________
> > Devel mailing list
> > Devel(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/devel
> >
> >
> >
> _______________________________________________
> Devel mailing list
> Devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/devel
>
>
>
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
3254
days inactive
3259
days old
6 comments
3 participants
participants (3)
-
Martin Perina -
Oved Ourfali -
Roy Golan