March 2020 - Infra - oVirt List Archives

[CQ]: 107495, 11 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107495,11 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 107696,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107696,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107495/11 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107696/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21711/

1 0

[CQ]: 107770, 3 (ovirt-system-tests) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107770,3 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 107439,4 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107439,4 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107770/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107439/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21703/

1 0

[CQ]: 107789, 1 (java-client-kubevirt) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107789,1 (java-client-kubevirt) failed. However, this change seems not to be the root cause for this failure. Change 107781,1 (java-client-kubevirt) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107781,1 (java-client-kubevirt) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107789/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107781/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21695/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64 #470
by jenkins＠jenkins.phx.ovirt.org 28 Mar '20

28 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 97b81245acf3b2c8271a2d5321717353d6350c3d (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 97b81245acf3b2c8271a2d5321717353d6350c3d Commit message: "virt sig: move repos to buildlogs" > git rev-list --no-walk 97b81245acf3b2c8271a2d5321717353d6350c3d # timeout=10 [system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1153622881923280837.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-sclo-rh-release-7.6-el7 yum + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7 /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base + check_yum_sync_needed centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-sclo-rh-release-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-sclo-rh-release-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: Error making cache directory: /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7' + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[CQ]: 106148, 19 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 106148,19 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 107696,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107696,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106148/19 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107696/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21687/

1 0

[CQ]: 107439, 4 (ovirt-system-tests) failed "ovirt-master" system tests
by oVirt Jenkins 28 Mar '20

28 Mar '20

Change 107439,4 (ovirt-system-tests) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/107439/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21678/

1 0

oVirt infra daily report - unstable production jobs - 1143
by jenkins＠jenkins.phx.ovirt.org 28 Mar '20

28 Mar '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1143//artifact/exported… Cheers, Jenkins

1 0

[CQ]: 9c532ee (ovirt-ansible-image-template) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-master" change queue including change 9c532ee (ovirt-ansible-image-template) failed. However, this change seems not to be the root cause for this failure. Change 40762ed (ovirt-ansible-image- template) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 40762ed (ovirt-ansible-image- template) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-image-template/commit/9c532eea3cba89… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-image-template/commit/40762edfd74f73… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21671/

1 0

[CQ]: 108014, 1 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-4.3" change queue including change 108014,1 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 107900,1 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107900,1 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108014/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107900/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3186/

1 0

[CQ]: c76d380 (ovirt-ansible) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-master" change queue including change c76d380 (ovirt-ansible) failed. However, this change seems not to be the root cause for this failure. Change 9fcf87a (ovirt-ansible) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 9fcf87a (ovirt-ansible) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible/commit/c76d380fbe08b46b03d41dd78f0a2… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible/commit/9fcf87ac4d6ecd04bf6c4882c516a… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21663/

1 0

[CQ]: 107868,4 (ovirt-engine) failed "ovirt-4.3" system tests
by oVirt Jenkins 27 Mar '20

27 Mar '20

Change 107868,4 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/107868/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3184/

1 0

[CQ]: 56eda69 (ovirt-ansible-image-template) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-master" change queue including change 56eda69 (ovirt-ansible-image-template) failed. However, this change seems not to be the root cause for this failure. Change 40762ed (ovirt-ansible-image- template) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 40762ed (ovirt-ansible-image- template) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-image-template/commit/56eda69e3ed22c… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-image-template/commit/40762edfd74f73… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21655/

1 0

Build failed in Jenkins: system-sync_mirrors-glusterfs-3.12-7.6-el7-x86_64 #464
by jenkins＠jenkins.phx.ovirt.org 27 Mar '20

27 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-3.12-7.6-el7-x8…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-3.12-7.6-el7-x8…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/changes/18/106118/19:shlomi > git rev-parse origin/shlomi^{commit} # timeout=10 > git rev-parse shlomi^{commit} # timeout=10 Checking out Revision 05b53f3b3ef7dda92a22ca738e3b95539dcfd40c (shlomi) > git config core.sparsecheckout # timeout=10 > git checkout -f 05b53f3b3ef7dda92a22ca738e3b95539dcfd40c Commit message: "Added mirror cleanup functionality" > git rev-list --no-walk 05b53f3b3ef7dda92a22ca738e3b95539dcfd40c # timeout=10 [system-sync_mirrors-glusterfs-3.12-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins3068091400824916308.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror glusterfs-3.12-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror glusterfs-3.12-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror glusterfs-3.12-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=glusterfs-3.12-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs glusterfs-3.12-7.6-el7 yum + local repo_name=glusterfs-3.12-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/glusterfs-3.12-7.6-el7 /var/www/html/repos/yum/glusterfs-3.12-7.6-el7/base + check_yum_sync_needed glusterfs-3.12-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=glusterfs-3.12-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/glusterfs-3.12-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync glusterfs-3.12-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=glusterfs-3.12-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=glusterfs-3.12-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/glusterfs-3.12-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 6

[JIRA] (OVIRT-2888) el7&&80gb-disk has 2 nodes down
by Sandro Bonazzola (oVirt JIRA) 27 Mar '20

27 Mar '20

Sandro Bonazzola created OVIRT-2888: --------------------------------------- Summary: el7&&80gb-disk has 2 nodes down Key: OVIRT-2888 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2888 Project: oVirt - virtualization made easy Issue Type: By-EMAIL Reporter: Sandro Bonazzola Assignee: infra Can you please bring back to online state https://jenkins.ovirt.org/computer/vm0084.workers-phx.ovirt.org/ and https://jenkins.ovirt.org/computer/vm0085.workers-phx.ovirt.org/ We have now only 2 builders for node and appliance online right now and if you need to build 4.3 and 4.4 on the same day you'll be able to release only with one day of delay. Sandro -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100122)

1 0

[CQ]: 107437, 4 (ovirt-system-tests) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107437,4 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 107786,1 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107786,1 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107437/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107786/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21647/

1 0

Build failed in Jenkins: system-sync_mirrors-fedora-base-fc29-x86_64 #1523
by jenkins＠jenkins.phx.ovirt.org 27 Mar '20

27 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/1…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/w…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-fedora-base-fc29-x86_64] $ /bin/bash -xe /tmp/jenkins5068661365620907729.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs fedora-base-fc29 yum + local repo_name=fedora-base-fc29 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/fedora-base-fc29 /var/www/html/repos/yum/fedora-base-fc29/base + check_yum_sync_needed fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/fedora-base-fc29 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=fedora-base-fc29 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=fedora-base-fc29 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/fedora-base-fc29/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-4.3-testing-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-43-testing/x86_64/os/repodata/repom…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 5

[CQ]: d0ad711 (ovirt-ansible) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-master" change queue including change d0ad711 (ovirt-ansible) failed. However, this change seems not to be the root cause for this failure. Change 9fcf87a (ovirt-ansible) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 9fcf87a (ovirt-ansible) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible/commit/d0ad7110f9edb9d8b505603e8122f… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible/commit/9fcf87ac4d6ecd04bf6c4882c516a… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21639/

1 0

oVirt infra daily report - unstable production jobs - 1142
by jenkins＠jenkins.phx.ovirt.org 27 Mar '20

27 Mar '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1142//artifact/exported… Cheers, Jenkins

1 0

[oVirt Jenkins] deploy-to-gated-dummy-master - Build #268 - FAILURE!
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

Build: https://jenkins.ovirt.org/job/deploy-to-gated-dummy-master/268/ Build Name: #268 Build Status: FAILURE Gerrit change: null - title: null - project: null - branch: null - author: null <null>

1 1

Build failed in Jenkins: system-sync_mirrors-centos-updates-7.6-el7-x86_64 #463
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-7.6-el7-x8…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-7.6-el7-x8…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-updates-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins4125347147591139003.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-updates-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-updates-7.6-el7 yum + local repo_name=centos-updates-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-updates-7.6-el7 /var/www/html/repos/yum/centos-updates-7.6-el7/base + check_yum_sync_needed centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-updates-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-updates-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-updates-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-updates-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-updates-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 4

Build failed in Jenkins: system-sync_mirrors-centos-extras-el7-x86_64 #3504
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-extras-el7-x86_64/…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-extras-el7-x86_64/…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-extras-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1236849569898146837.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-extras-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-extras-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-extras-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-extras-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-extras-el7 yum + local repo_name=centos-extras-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-extras-el7 /var/www/html/repos/yum/centos-extras-el7/base + check_yum_sync_needed centos-extras-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-extras-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-extras-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-extras-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-extras-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-extras-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-extras-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-4.3-testing-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-43-testing/x86_64/os/repodata/repom…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

[CQ]: 106133, 13 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 26 Mar '20

26 Mar '20

A system test invoked by the "ovirt-master" change queue including change 106133,13 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 107696,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107696,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106133/13 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107696/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21631/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-qemu-ev-testing-el7-x86_64 #2227
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-testing-el…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-testing-el…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-qemu-ev-testing-el7-x86_64] $ /bin/bash -xe /tmp/jenkins6601188237954464.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-qemu-ev-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-qemu-ev-testing-el7 yum + local repo_name=centos-qemu-ev-testing-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-qemu-ev-testing-el7 /var/www/html/repos/yum/centos-qemu-ev-testing-el7/base + check_yum_sync_needed centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-qemu-ev-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-qemu-ev-testing-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-qemu-ev-testing-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-qemu-ev-testing-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-qemu-ev-testing-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-4.3-testing-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-43-testing/x86_64/os/repodata/repom…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

[CQ]: 107950, 4 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 26 Mar '20

26 Mar '20

A system test invoked by the "ovirt-4.3" change queue including change 107950,4 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 107900,1 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107900,1 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107950/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107900/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3182/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-ovirt-4.2-7.6-el7-x86_64 #462
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-4.2-7.6-el7-…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-4.2-7.6-el7-…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-ovirt-4.2-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1255232830100010034.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-ovirt-4.2-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-ovirt-4.2-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-ovirt-4.2-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-ovirt-4.2-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-ovirt-4.2-7.6-el7 yum + local repo_name=centos-ovirt-4.2-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-ovirt-4.2-7.6-el7 /var/www/html/repos/yum/centos-ovirt-4.2-7.6-el7/base + check_yum_sync_needed centos-ovirt-4.2-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-ovirt-4.2-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-ovirt-4.2-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-ovirt-4.2-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-ovirt-4.2-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-ovirt-4.2-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-ovirt-4.2-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-4.3-testing-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-43-testing/x86_64/os/repodata/repom…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-base-el7-x86_64 #3556
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-base-el7-x86_64/35…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-base-el7-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-base-el7-x86_64] $ /bin/bash -xe /tmp/jenkins118878587414459380.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-base-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-base-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-base-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-base-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-base-el7 yum + local repo_name=centos-base-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-base-el7 /var/www/html/repos/yum/centos-base-el7/base + check_yum_sync_needed centos-base-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-base-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-base-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-base-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-base-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-base-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-base-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-opstools-release-el7-x86_64 #1379
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-release-e…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-release-e…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-opstools-release-el7-x86_64] $ /bin/bash -xe /tmp/jenkins5678330068795785609.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-opstools-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-opstools-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-opstools-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-opstools-release-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-opstools-release-el7 yum + local repo_name=centos-opstools-release-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-opstools-release-el7 /var/www/html/repos/yum/centos-opstools-release-el7/base + check_yum_sync_needed centos-opstools-release-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-opstools-release-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-opstools-release-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-opstools-release-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-opstools-release-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-opstools-release-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-opstools-release-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-fedora-updates-fc29-x86_64 #1509
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-updates-fc29-x86_6…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-updates-fc29-x86_6…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-fedora-updates-fc29-x86_64] $ /bin/bash -xe /tmp/jenkins5944224309921457226.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror fedora-updates-fc29 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror fedora-updates-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror fedora-updates-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=fedora-updates-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs fedora-updates-fc29 yum + local repo_name=fedora-updates-fc29 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/fedora-updates-fc29 /var/www/html/repos/yum/fedora-updates-fc29/base + check_yum_sync_needed fedora-updates-fc29 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=fedora-updates-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/fedora-updates-fc29 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync fedora-updates-fc29 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=fedora-updates-fc29 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=fedora-updates-fc29 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/fedora-updates-fc29/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-qemu-ev-release-el7-x86_64 #3002
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-release-el…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-release-el…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-qemu-ev-release-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1360712674030577178.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-qemu-ev-release-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-qemu-ev-release-el7 yum + local repo_name=centos-qemu-ev-release-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-qemu-ev-release-el7 /var/www/html/repos/yum/centos-qemu-ev-release-el7/base + check_yum_sync_needed centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-qemu-ev-release-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-qemu-ev-release-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-qemu-ev-release-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-qemu-ev-release-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-qemu-ev-release-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Fwd: [CentOS-devel] CBS mash repositories going away next wednesday
by Sandro Bonazzola 26 Mar '20

26 Mar '20

Heads up that we may have disruptions due to repositories being sunsetted. We'll need to update all the places pointing to repos hosted on cbs.centos.org to use https://buildlogs.centos.org/ instead. Note that repository structure is different so manual work is needed to adapt. ---------- Forwarded message --------- Da: Fabian Arrotin <arrfab(a)centos.org> Date: lun 23 mar 2020 alle ore 13:44 Subject: [CentOS-devel] CBS mash repositories going away next wednesday To: The CentOS developers mailing list. <centos-devel(a)centos.org> Tied to the previous announce, the new signing system will not depend on cbs-content-control, which itself was using repositories prepared by mash. Those repositories, while normally not meant to be consumed, will so go away. So all https://cbs.centos.org/repos/* will disappear next wednesday (FWIW) -- Fabian Arrotin The CentOS Project | https://www.centos.org gpg key: 17F3B7A1 | twitter: @arrfab _______________________________________________ CentOS-devel mailing list CentOS-devel(a)centos.org https://lists.centos.org/mailman/listinfo/centos-devel -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

2 1

Build failed in Jenkins: system-sync_mirrors-centos-updates-el7-x86_64 #3638
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-el7-x86_64…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-el7-x86_64…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-updates-el7-x86_64] $ /bin/bash -xe /tmp/jenkins348476908730435129.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-updates-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-updates-el7 yum + local repo_name=centos-updates-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-updates-el7 /var/www/html/repos/yum/centos-updates-el7/base + check_yum_sync_needed centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-updates-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-updates-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-updates-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-updates-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-updates-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-mock-copr-fc30-x86_64 #949
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-mock-copr-fc30-x86_64/949…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-mock-copr-fc30-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-mock-copr-fc30-x86_64] $ /bin/bash -xe /tmp/jenkins8824913151888893468.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror mock-copr-fc30 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror mock-copr-fc30 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror mock-copr-fc30 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=mock-copr-fc30 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs mock-copr-fc30 yum + local repo_name=mock-copr-fc30 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/mock-copr-fc30 /var/www/html/repos/yum/mock-copr-fc30/base + check_yum_sync_needed mock-copr-fc30 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=mock-copr-fc30 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/mock-copr-fc30 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync mock-copr-fc30 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=mock-copr-fc30 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=mock-copr-fc30 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/mock-copr-fc30/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

[CQ]: 107970, 4 (ovirt-provider-ovn) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 26 Mar '20

26 Mar '20

A system test invoked by the "ovirt-4.3" change queue including change 107970,4 (ovirt-provider-ovn) failed. However, this change seems not to be the root cause for this failure. Change 107869,3 (ovirt-provider-ovn) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107869,3 (ovirt-provider-ovn) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107970/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107869/3 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3180/

1 0

[CQ]: 107841, 8 (ovirt-engine-nodejs-modules) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 26 Mar '20

26 Mar '20

A system test invoked by the "ovirt-4.3" change queue including change 107841,8 (ovirt-engine-nodejs-modules) failed. However, this change seems not to be the root cause for this failure. Change 107967,7 (ovirt-engine-nodejs-modules) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107967,7 (ovirt-engine-nodejs- modules) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107841/8 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107967/7 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3179/

1 0

Build failed in Jenkins: system-sync_mirrors-fedora-base-fc30-x86_64 #964
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc30-x86_64/9…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc30-x86_64/w…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-fedora-base-fc30-x86_64] $ /bin/bash -xe /tmp/jenkins5402425233407325778.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror fedora-base-fc30 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror fedora-base-fc30 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror fedora-base-fc30 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=fedora-base-fc30 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs fedora-base-fc30 yum + local repo_name=fedora-base-fc30 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/fedora-base-fc30 /var/www/html/repos/yum/fedora-base-fc30/base + check_yum_sync_needed fedora-base-fc30 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=fedora-base-fc30 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/fedora-base-fc30 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync fedora-base-fc30 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=fedora-base-fc30 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=fedora-base-fc30 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/fedora-base-fc30/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

[CQ]: 107424, 4 (ovirt-system-tests) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 26 Mar '20

26 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107424,4 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 107786,1 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107786,1 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107424/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107786/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21623/

1 0

Build failed in Jenkins: system-sync_mirrors-fedora-updates-fc30-x86_64 #961
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-updates-fc30-x86_6…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-updates-fc30-x86_6…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-fedora-updates-fc30-x86_64] $ /bin/bash -xe /tmp/jenkins6220735269820879966.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror fedora-updates-fc30 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror fedora-updates-fc30 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror fedora-updates-fc30 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=fedora-updates-fc30 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs fedora-updates-fc30 yum + local repo_name=fedora-updates-fc30 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/fedora-updates-fc30 /var/www/html/repos/yum/fedora-updates-fc30/base + check_yum_sync_needed fedora-updates-fc30 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=fedora-updates-fc30 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/fedora-updates-fc30 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync fedora-updates-fc30 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=fedora-updates-fc30 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=fedora-updates-fc30 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/fedora-updates-fc30/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

[CQ]: 107967, 7 (ovirt-engine-nodejs-modules) failed "ovirt-4.3" system tests
by oVirt Jenkins 26 Mar '20

26 Mar '20

Change 107967,7 (ovirt-engine-nodejs-modules) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/107967/7 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3177/

1 0

Build failed in Jenkins: system-sync_mirrors-glusterfs-6-el7-x86_64 #991
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-6-el7-x86_64/99…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-6-el7-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-glusterfs-6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins3347539960401637342.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=glusterfs-6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs glusterfs-6-el7 yum + local repo_name=glusterfs-6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/glusterfs-6-el7 /var/www/html/repos/yum/glusterfs-6-el7/base + check_yum_sync_needed glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=glusterfs-6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/glusterfs-6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=glusterfs-6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=glusterfs-6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/glusterfs-6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-qemu-ev-release-7.6-el7-x86_64 #462
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-release-7.…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-release-7.…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-qemu-ev-release-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins5582186886828816258.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-qemu-ev-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-qemu-ev-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-qemu-ev-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-qemu-ev-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-qemu-ev-release-7.6-el7 yum + local repo_name=centos-qemu-ev-release-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-qemu-ev-release-7.6-el7 /var/www/html/repos/yum/centos-qemu-ev-release-7.6-el7/base + check_yum_sync_needed centos-qemu-ev-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-qemu-ev-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-qemu-ev-release-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-qemu-ev-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-qemu-ev-release-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-qemu-ev-release-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-qemu-ev-release-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-sclo-rh-release-x86_64 #563
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-x8…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-x8…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-sclo-rh-release-x86_64] $ /bin/bash -xe /tmp/jenkins3236321820079758337.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-sclo-rh-release x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-sclo-rh-release x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-sclo-rh-release x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-sclo-rh-release + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-sclo-rh-release yum + local repo_name=centos-sclo-rh-release + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-sclo-rh-release /var/www/html/repos/yum/centos-sclo-rh-release/base + check_yum_sync_needed centos-sclo-rh-release x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-sclo-rh-release + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-sclo-rh-release ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-sclo-rh-release x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-sclo-rh-release ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-sclo-rh-release --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-sclo-rh-release/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-ovirt-4.2-el7-x86_64 #3016
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-4.2-el7-x86_…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-4.2-el7-x86_…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-ovirt-4.2-el7-x86_64] $ /bin/bash -xe /tmp/jenkins336661932234936416.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-ovirt-4.2-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-ovirt-4.2-el7 yum + local repo_name=centos-ovirt-4.2-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-ovirt-4.2-el7 /var/www/html/repos/yum/centos-ovirt-4.2-el7/base + check_yum_sync_needed centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-ovirt-4.2-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-ovirt-4.2-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-ovirt-4.2-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-ovirt-4.2-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-ovirt-4.2-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-base-7.6-el7-x86_64 #463
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-base-7.6-el7-x86_6…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-base-7.6-el7-x86_6…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-base-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins3742531711075967700.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-base-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-base-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-base-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-base-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-base-7.6-el7 yum + local repo_name=centos-base-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-base-7.6-el7 /var/www/html/repos/yum/centos-base-7.6-el7/base + check_yum_sync_needed centos-base-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-base-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-base-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-base-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-base-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-base-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-base-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-extras-7.6-el7-x86_64 #463
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-extras-7.6-el7-x86…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-extras-7.6-el7-x86…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-extras-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins4153278891965780250.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-extras-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-extras-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-extras-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-extras-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-extras-7.6-el7 yum + local repo_name=centos-extras-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-extras-7.6-el7 /var/www/html/repos/yum/centos-extras-7.6-el7/base + check_yum_sync_needed centos-extras-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-extras-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-extras-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-extras-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-extras-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-extras-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-extras-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-opstools-release-7.6-el7-x86_64 #463
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-release-7…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-release-7…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-opstools-release-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins8170656809565615537.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-opstools-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-opstools-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-opstools-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-opstools-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-opstools-release-7.6-el7 yum + local repo_name=centos-opstools-release-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-opstools-release-7.6-el7 /var/www/html/repos/yum/centos-opstools-release-7.6-el7/base + check_yum_sync_needed centos-opstools-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-opstools-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-opstools-release-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-opstools-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-opstools-release-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-opstools-release-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-opstools-release-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64 #463
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins2065724034968120457.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-sclo-rh-release-7.6-el7 yum + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7 /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base + check_yum_sync_needed centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-sclo-rh-release-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-sclo-rh-release-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-centos-opstools-testing-el7-x86_64 #3491
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-testing-e…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-testing-e…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-centos-opstools-testing-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1698036885855704399.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-opstools-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-opstools-testing-el7 yum + local repo_name=centos-opstools-testing-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-opstools-testing-el7 /var/www/html/repos/yum/centos-opstools-testing-el7/base + check_yum_sync_needed centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-opstools-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-opstools-testing-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-opstools-testing-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-opstools-testing-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-opstools-testing-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-common-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-common-testing/x86_64/os/repodata/r…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: system-sync_mirrors-epel-el7-x86_64 #3498
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-epel-el7-x86_64/3498/disp…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-epel-el7-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-epel-el7-x86_64] $ /bin/bash -xe /tmp/jenkins6454420799875485029.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror epel-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror epel-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror epel-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=epel-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs epel-el7 yum + local repo_name=epel-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/epel-el7 /var/www/html/repos/yum/epel-el7/base + check_yum_sync_needed epel-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=epel-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/epel-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync epel-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=epel-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=epel-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/epel-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-4.3-testing-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-43-testing/x86_64/os/repodata/repom…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 2

Container-based CI backend is now available for use
by Barak Korren 26 Mar '20

26 Mar '20

A little less then a month ago I sent an email to this list telling you all about ongoing work to create a new container-based backend for the oVirt CI system. I'm pleased to announce that we have managed to finally merged an initial set of patches implementing that backend yesterday, and it is now available for general use. *What? Were? How do I use it?* Documentation about how to use the new backend is now available in read the docs <https://ovirt-infra-docs.readthedocs.io/en/latest/CI/STDCI-Containers/index…> . *Wait! I needed it to do X which it doesn't!* For the time being the new backend lacks some features that some may consider to be essential, such as automated cloning of patch source code and build artifact collection. We already have implemented patches providing a substantial amount of additional functionality, and hopefully we will be able to merge them soon. Following is a list of those patches and the features they implement: 1. Automated source cloning support: - 104213 <https://gerrit.ovirt.org/104213>: Implement STDCI DSL support for initContainers - 104590 <https://gerrit.ovirt.org/104590>: STDCI DSL: Add the `decorate` option - 104668 <https://gerrit.ovirt.org/104668>: Document source cloning extension for containers 2. Artifact collection support - 104690 <https://gerrit.ovirt.org/104690>: Added NFS server container image - 104273 <https://gerrit.ovirt.org/104273>: STDCI PODS: Unique UID for each job build's POD - 104756 <https://gerrit.ovirt.org/104756>: pipeline-loader: refactor: separate podspec func - 104757 <https://gerrit.ovirt.org/104757>: pipeline-loader: refactor: Use podspec struct def - 104766 <https://gerrit.ovirt.org/104766>: STDCI PODs: Add artifact collection logic - 105522 <https://gerrit.ovirt.org/105522>: Documented artifact collection in containers 3. Extended log collection - 104842 <https://gerrit.ovirt.org/104842>: STDCI PODs: Add POD log collection - 105523 <https://gerrit.ovirt.org/105523>: Documented log collection in containers 4. Privileged container support - 104786 <https://gerrit.ovirt.org/104786>: STDCI DSL: Enable privileged containers 5. Support for using containers in gating jobs: - 104804 <https://gerrit.ovirt.org/104804>: standard-stage: refactor: move DSL to a library - 104811 <https://gerrit.ovirt.org/104811>: gate: Support getting suits from STDCI DSL 6. Providing the `extra_sources` file to OST suit containers: - 104843 <https://gerrit.ovirt.org/104843>: stdci_runner: Create extra_sources for PODs 7. Support for mirror injection and upstream source cloning - 104917 <https://gerrit.ovirt.org/104917>: Added a container with STDCI tools - 104918 <https://gerrit.ovirt.org/104918>: decorate.py: Add script - 104989 <https://gerrit.ovirt.org/104989>: STDCI DSL: Use `tools` container for `decorate` - 104994 <https://gerrit.ovirt.org/104994>: stdci_runner: Inject mirrors in PODs As you can see, we have quite a big pile of reviews to do, as always, help is very welcome... Regards, Barak. -- Barak Korren RHV DevOps team , RHCE, RHCi Red Hat EMEA redhat.com | TRIED. TESTED. TRUSTED. | redhat.com/trusted

2 4

Build failed in Jenkins: system-sync_mirrors-mock-copr-el7-x86_64 #953
by jenkins＠jenkins.phx.ovirt.org 26 Mar '20

26 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-mock-copr-el7-x86_64/953/…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-mock-copr-el7-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d65423b0df3d6dff884959131a31be00c3d239ca (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d65423b0df3d6dff884959131a31be00c3d239ca Commit message: "usrc_updater: Allow to run in debug using env var" > git rev-list --no-walk d65423b0df3d6dff884959131a31be00c3d239ca # timeout=10 [system-sync_mirrors-mock-copr-el7-x86_64] $ /bin/bash -xe /tmp/jenkins8646940833134780190.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror mock-copr-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror mock-copr-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror mock-copr-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=mock-copr-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs mock-copr-el7 yum + local repo_name=mock-copr-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/mock-copr-el7 /var/www/html/repos/yum/mock-copr-el7/base + check_yum_sync_needed mock-copr-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=mock-copr-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/mock-copr-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync mock-copr-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=mock-copr-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=mock-copr-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/mock-copr-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from centos-ovirt-4.3-testing-el7: [Errno 256] No more mirrors to try. http://cbs.centos.org/repos/virt7-ovirt-43-testing/x86_64/os/repodata/repom…: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

1 2