- Infra - oVirt List Archives

[CQ]: 103623, 2 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103623,2 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103623/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16239/

1 0

[CQ]: 103645, 5 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103645,5 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103645/5 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16235/

1 0

[CQ]: 103658, 5 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103658,5 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103658/5 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16231/

1 0

[CQ]: 103763, 1 (ovirt-release) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103763,1 (ovirt-release) failed. However, this change seems not to be the root cause for this failure. Change 103754,1 (ovirt-release) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103754,1 (ovirt-release) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103763/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103754/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16227/

1 0

[CQ]: 103758, 1 (ovirt-host) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103758,1 (ovirt-host) failed. However, this change seems not to be the root cause for this failure. Change 101396,1 (ovirt-host) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 101396,1 (ovirt-host) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103758/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/101396/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16223/

1 0

[CQ]: 103604, 5 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103604,5 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103604/5 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16220/

1 0

[CQ]: 103754,1 (ovirt-release) failed "ovirt-master" system tests
by oVirt Jenkins 02 Oct '19

02 Oct '19

Change 103754,1 (ovirt-release) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/103754/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16216/

1 0

[CQ]: 103249, 10 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103249,10 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103249/10 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16213/

1 0

[CQ]: 103606, 5 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103606,5 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103606/5 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16210/

1 0

[CQ]: 103248, 10 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103248,10 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103248/10 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16206/

1 0

[CQ]: 103496, 10 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103496,10 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103496/10 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16202/

1 0

[CQ]: 103678, 3 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103678,3 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103678/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16198/

1 0

[CQ]: 103679, 3 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103679,3 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 103677,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103677,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103679/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16193/

1 0

[CQ]: 103677,3 (vdsm) failed "ovirt-master" system tests
by oVirt Jenkins 02 Oct '19

02 Oct '19

Change 103677,3 (vdsm) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/103677/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16190/

1 0

[CQ]: 103723, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103723,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103723/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16185/

1 0

[CQ]: 103381, 7 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103381,7 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103381/7 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16182/

1 0

[CQ]: 103674, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 02 Oct '19

02 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103674,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103674/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16176/

1 0

oVirt infra daily report - unstable production jobs - 965
by jenkins＠jenkins.phx.ovirt.org 02 Oct '19

02 Oct '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/965//artifact/exported-a… Cheers, Jenkins

1 0

[CQ]: 103014, 7 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103014,7 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103014/7 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16173/

1 0

[CQ]: 103704, 1 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103704,1 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103704/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16169/

1 0

[CQ]: 103683, 1 (ovirt-host) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103683,1 (ovirt-host) failed. However, this change seems not to be the root cause for this failure. Change 101396,1 (ovirt-host) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 101396,1 (ovirt-host) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103683/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/101396/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16165/

1 0

[JIRA] (OVIRT-2806) Java 8 to 11 migration for vdsm-jsonrpc-java job
by Artur Socha (oVirt JIRA) 01 Oct '19

01 Oct '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2806?page=com.atlassian.jira.… ] Artur Socha updated OVIRT-2806: ------------------------------- Resolution: Won't Do Status: Done (was: To Do) Closing because I actually have learned how/where the jobs are configured > Java 8 to 11 migration for vdsm-jsonrpc-java job > ------------------------------------------------ > > Key: OVIRT-2806 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2806 > Project: oVirt - virtualization made easy > Issue Type: Task > Components: CI client projects, Jenkins Slaves > Reporter: Artur Socha > Assignee: infra > Priority: Low > > vdsm-jsonrpc-java is supposed to be built using OpenJDK 11.0.4. > https://jenkins.ovirt.org/view/Master%20branch%20per%20project/view/vdsm-js… > Jenkins job seems to be still using JDK 1.8. Could you please help with changing its configuration to use JDK 11 by default or advise me whether I can do it by myself? > I believe ovirt-engine job can be used as reference as it is already running builds with JDK 11. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100111)

1 0

[CQ]: 103705, 1 (ovirt-hosted-engine-setup) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103705,1 (ovirt-hosted-engine-setup) failed. However, this change seems not to be the root cause for this failure. Change 103394,1 (ovirt-hosted-engine-setup) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103394,1 (ovirt-hosted-engine- setup) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103705/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103394/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16161/

1 0

Unable to Upgrade
by Akshita Jain 01 Oct '19

01 Oct '19

After upgrading oVirt 4.3.4 to 4.3.6, the gluster is also upgrading from 5.6 to 6.5. But as soon as it upgrades gluster peer status shows disconnected. What is the correct method to upgrade oVirt with gluster HCI environment?

1 0

[JIRA] (OVIRT-2806) Java 8 to 11 migration for vdsm-jsonrpc-java job
by Artur Socha (oVirt JIRA) 01 Oct '19

01 Oct '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2806?page=com.atlassian.jira.… ] Artur Socha updated OVIRT-2806: ------------------------------- Summary: Java 8 to 11 migration for vdsm-jsonrpc-java job (was: Java 8 to 11 migration for vdsm-jsonrpci-java job) > Java 8 to 11 migration for vdsm-jsonrpc-java job > ------------------------------------------------ > > Key: OVIRT-2806 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2806 > Project: oVirt - virtualization made easy > Issue Type: Task > Components: CI client projects, Jenkins Slaves > Reporter: Artur Socha > Assignee: infra > Priority: Low > > vdsm-jsonrpc-java is supposed to be built using OpenJDK 11.0.4. > https://jenkins.ovirt.org/view/Master%20branch%20per%20project/view/vdsm-js… > Jenkins job seems to be still using JDK 1.8. Could you please help with changing its configuration to use JDK 11 by default or advise me whether I can do it by myself? > I believe ovirt-engine job can be used as reference as it is already running builds with JDK 11. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100111)

1 0

[CQ]: 103708,2 (jenkins) failed "dummy-master" system tests
by oVirt Jenkins 01 Oct '19

01 Oct '19

Change 103708,2 (jenkins) is probably the reason behind recent system test failures in the "dummy-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/103708/2 For failed test results see: https://jenkins-staging.ovirt.org/job/dummy-master_change-queue-tester/306/

1 0

[JIRA] (OVIRT-2806) Java 8 to 11 migration for vdsm-jsonrpci-java job
by Artur Socha (oVirt JIRA) 01 Oct '19

01 Oct '19

Artur Socha created OVIRT-2806: ---------------------------------- Summary: Java 8 to 11 migration for vdsm-jsonrpci-java job Key: OVIRT-2806 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2806 Project: oVirt - virtualization made easy Issue Type: Task Components: CI client projects, Jenkins Slaves Reporter: Artur Socha Assignee: infra Priority: Low vdsm-jsonrpc-java is supposed to be built using OpenJDK 11.0.4. https://jenkins.ovirt.org/view/Master%20branch%20per%20project/view/vdsm-js… Jenkins job seems to be still using JDK 1.8. Could you please help with changing its configuration to use JDK 11 by default or advise me whether I can do it by myself? I believe ovirt-engine job can be used as reference as it is already running builds with JDK 11. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100111)

1 0

[CQ]: eb70453 (ovirt-ansible-engine-setup) failed "ovirt-master" system tests
by oVirt Jenkins 01 Oct '19

01 Oct '19

Change eb70453 (ovirt-ansible-engine-setup) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://github.com/oVirt/ovirt-ansible-engine-setup/commit/eb704538e47c4c3e… For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16157/

1 0

[CQ]: 0a1c92f (ovirt-ansible-hosted-engine-setup) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-master" change queue including change 0a1c92f (ovirt-ansible-hosted-engine-setup) failed. However, this change seems not to be the root cause for this failure. Change 339a4a8 (ovirt-ansible- hosted-engine-setup) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 339a4a8 (ovirt-ansible-hosted- engine-setup) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-hosted-engine-setup/commit/0a1c92fca… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-hosted-engine-setup/commit/339a4a8bb… For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16154/

1 0

[CQ]: 103692,4 (ovirt-setup-lib) failed "ovirt-master" system tests
by oVirt Jenkins 01 Oct '19

01 Oct '19

Change 103692,4 (ovirt-setup-lib) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/103692/4 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16151/

1 0

[CQ]: 103681, 1 (ovirt-host) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103681,1 (ovirt-host) failed. However, this change seems not to be the root cause for this failure. Change 101396,1 (ovirt-host) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 101396,1 (ovirt-host) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103681/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/101396/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16149/

1 0

[CQ]: eb70453 (ovirt-ansible-engine-setup) failed "ovirt-4.3" system tests
by oVirt Jenkins 01 Oct '19

01 Oct '19

Change eb70453 (ovirt-ansible-engine-setup) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://github.com/oVirt/ovirt-ansible-engine-setup/commit/eb704538e47c4c3e… For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/2206/

1 0

[CQ]: 0a1c92f (ovirt-ansible-hosted-engine-setup) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-4.3" change queue including change 0a1c92f (ovirt-ansible-hosted-engine-setup) failed. However, this change seems not to be the root cause for this failure. Change 6df6656 (ovirt-ansible-hosted- engine-setup) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 6df6656 (ovirt-ansible-hosted- engine-setup) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-hosted-engine-setup/commit/0a1c92fca… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-hosted-engine-setup/commit/6df665600… For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/2205/

1 0

Build failed in Jenkins: system-sync_mirrors-glusterfs-6-el7-x86_64 #461
by jenkins＠jenkins.phx.ovirt.org 01 Oct '19

01 Oct '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-6-el7-x86_64/461…> ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-6-el7-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision b602b2dd4172b140452b92285e40bdc3d755b3cf (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f b602b2dd4172b140452b92285e40bdc3d755b3cf Commit message: "ovirt-engine-sdk: drop sdk v3 from master" > git rev-list --no-walk b602b2dd4172b140452b92285e40bdc3d755b3cf # timeout=10 [system-sync_mirrors-glusterfs-6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins7993719209845659773.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=glusterfs-6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs glusterfs-6-el7 yum + local repo_name=glusterfs-6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/glusterfs-6-el7 /var/www/html/repos/yum/glusterfs-6-el7/base + check_yum_sync_needed glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=glusterfs-6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/glusterfs-6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync glusterfs-6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=glusterfs-6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=glusterfs-6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/glusterfs-6-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1468, in _commonLoadRepoXML local = self.cachedir + '/repomd.xml' File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 777, in <lambda> cachedir = property(lambda self: self._dirGetAttr('cachedir')) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 760, in _dirGetAttr self.dirSetup() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 738, in dirSetup self._dirSetupMkdir_p(dir) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 715, in _dirSetupMkdir_p raise Errors.RepoError, msg yum.Errors.RepoError: Error making cache directory: /home/jenkins/mirrors_cache/fedora-base-fc30/gen error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/fedora-base-fc30/gen' + reposync_out= Build step 'Execute shell' marked build as failure

1 1

planned gerrit restart
by Evgheni Dereveanchin 01 Oct '19

01 Oct '19

Hi everyone, I will be installing updates on gerrit.ovirt.org tonight. This means that both repos and code review will be unreachable for short periods of time. CI will also be paused temporarily to avoid false positives. I will announce you once maintenance is complete. -- Regards, Evgheni Dereveanchin

1 1

oVirt infra daily report - unstable production jobs - 964
by jenkins＠jenkins.phx.ovirt.org 01 Oct '19

01 Oct '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/964//artifact/exported-a… Cheers, Jenkins

1 0

[CQ]: 103701, 1 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 01 Oct '19

01 Oct '19

A system test invoked by the "ovirt-master" change queue including change 103701,1 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103701/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16147/

1 0

[CQ]: 103694, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 30 Sep '19

30 Sep '19

A system test invoked by the "ovirt-master" change queue including change 103694,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103694/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16146/

1 0

[CQ]: 103700, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 30 Sep '19

30 Sep '19

A system test invoked by the "ovirt-master" change queue including change 103700,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103700/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16144/

1 0

[CQ]: 103384, 7 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 30 Sep '19

30 Sep '19

A system test invoked by the "ovirt-master" change queue including change 103384,7 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103384/7 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16141/

1 0

[CQ]: 103637, 4 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 30 Sep '19

30 Sep '19

A system test invoked by the "ovirt-master" change queue including change 103637,4 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 102934,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 102934,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103637/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/102934/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16138/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-opstools-testing-el7-x86_64 #2956
by jenkins＠jenkins.phx.ovirt.org 30 Sep '19

30 Sep '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-testing-el…> ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-testing-el…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 73e6c6324b26eacacae20b320580c739a65166bf (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 73e6c6324b26eacacae20b320580c739a65166bf Commit message: "appliance: require more space for building" > git rev-list --no-walk 73e6c6324b26eacacae20b320580c739a65166bf # timeout=10 [system-sync_mirrors-centos-opstools-testing-el7-x86_64] $ /bin/bash -xe /tmp/jenkins5956526384042381214.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-opstools-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-opstools-testing-el7 yum + local repo_name=centos-opstools-testing-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-opstools-testing-el7 /var/www/html/repos/yum/centos-opstools-testing-el7/base + check_yum_sync_needed centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-opstools-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-opstools-testing-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-opstools-testing-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-opstools-testing-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-opstools-testing-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1042, in _getFile raise e yum.Errors.NoMoreMirrorsRepoError: failure: repodata/repomd.xml from centos-opstools-testing-el7: [Errno 256] No more mirrors to try. http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2604:4500:0:109::10: Network is unreachable" + reposync_out= Build step 'Execute shell' marked build as failure

1 4

[JIRA] (OVIRT-2805) build-artifacts job stuck on s390x - cannot run OST
by Evgheni Dereveanchin (oVirt JIRA) 30 Sep '19

30 Sep '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2805?page=com.atlassian.jira.… ] Evgheni Dereveanchin reassigned OVIRT-2805: ------------------------------------------- Assignee: Evgheni Dereveanchin (was: infra) > build-artifacts job stuck on s390x - cannot run OST > --------------------------------------------------- > > Key: OVIRT-2805 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2805 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Nir Soffer > Assignee: Evgheni Dereveanchin > > Since Friday build-artifacts on s390x get stuck again, so we cannot run OST. > This is not a new issue, we have issues on s390x every few weeks. > I posted this patch to disable this job: > https://gerrit.ovirt.org/c/97851 > We can enable the job when we have a reliable build slave again. > Here are some failed jobs: > - http://jenkins.ovirt.org/job/standard-manual-runner/757/ > - http://jenkins.ovirt.org/job/standard-manual-runner/758/ > - http://jenkins.ovirt.org/job/standard-manual-runner/759/ > - http://jenkins.ovirt.org/job/standard-manual-runner/762/ > - http://jenkins.ovirt.org/job/standard-manual-runner/763/ > - http://jenkins.ovirt.org/job/standard-manual-runner/764/ > Nir -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100111)

1 0

[CQ]: 103544,3 (vdsm) failed "ovirt-master" system tests
by oVirt Jenkins 30 Sep '19

30 Sep '19

Change 103544,3 (vdsm) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/103544/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16135/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-qemu-ev-testing-el7-x86_64 #1693
by jenkins＠jenkins.phx.ovirt.org 30 Sep '19

30 Sep '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-testing-el7…> ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-testing-el7…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 73e6c6324b26eacacae20b320580c739a65166bf (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 73e6c6324b26eacacae20b320580c739a65166bf Commit message: "appliance: require more space for building" > git rev-list --no-walk 73e6c6324b26eacacae20b320580c739a65166bf # timeout=10 [system-sync_mirrors-centos-qemu-ev-testing-el7-x86_64] $ /bin/bash -xe /tmp/jenkins7086090968178625289.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-qemu-ev-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-qemu-ev-testing-el7 yum + local repo_name=centos-qemu-ev-testing-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-qemu-ev-testing-el7 /var/www/html/repos/yum/centos-qemu-ev-testing-el7/base + check_yum_sync_needed centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-qemu-ev-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-qemu-ev-testing-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-qemu-ev-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-qemu-ev-testing-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-qemu-ev-testing-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-qemu-ev-testing-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1042, in _getFile raise e yum.Errors.NoMoreMirrorsRepoError: failure: repodata/repomd.xml from centos-qemu-ev-testing-el7: [Errno 256] No more mirrors to try. https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" https://buildlogs.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repom…: [Errno 14] curl#7 - "Failed to connect to 2607:1680:0:1::2: Network is unreachable" + reposync_out= Build step 'Execute shell' marked build as failure

1 3

[CQ]: 103665,1 (otopi) failed "ovirt-master" system tests
by oVirt Jenkins 30 Sep '19

30 Sep '19

Change 103665,1 (otopi) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/103665/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16132/

1 0

[CQ]: 103074,6 (vdsm) failed "ovirt-master" system tests
by oVirt Jenkins 30 Sep '19

30 Sep '19

Change 103074,6 (vdsm) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/103074/6 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16131/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-ovirt-4.2-el7-x86_64 #2483
by jenkins＠jenkins.phx.ovirt.org 30 Sep '19

30 Sep '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-4.2-el7-x86_6…> ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-4.2-el7-x86_6…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 73e6c6324b26eacacae20b320580c739a65166bf (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 73e6c6324b26eacacae20b320580c739a65166bf Commit message: "appliance: require more space for building" > git rev-list --no-walk 73e6c6324b26eacacae20b320580c739a65166bf # timeout=10 [system-sync_mirrors-centos-ovirt-4.2-el7-x86_64] $ /bin/bash -xe /tmp/jenkins7057564084553799391.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-ovirt-4.2-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-ovirt-4.2-el7 yum + local repo_name=centos-ovirt-4.2-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-ovirt-4.2-el7 /var/www/html/repos/yum/centos-ovirt-4.2-el7/base + check_yum_sync_needed centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-ovirt-4.2-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-ovirt-4.2-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-ovirt-4.2-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-ovirt-4.2-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-ovirt-4.2-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-ovirt-4.2-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1042, in _getFile raise e yum.Errors.NoMoreMirrorsRepoError: failure: repodata/repomd.xml from centos-opstools-testing-el7: [Errno 256] No more mirrors to try. http://buildlogs.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] HTTPS Error 302 - Found + reposync_out= Build step 'Execute shell' marked build as failure

1 1

oVirt infra daily report - unstable production jobs - 963
by jenkins＠jenkins.phx.ovirt.org 30 Sep '19

30 Sep '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/963//artifact/exported-a… Cheers, Jenkins

1 0

[CQ]: 0e5d6dd (v2v-conversion-host) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 29 Sep '19

29 Sep '19

A system test invoked by the "ovirt-master" change queue including change 0e5d6dd (v2v-conversion-host) failed. However, this change seems not to be the root cause for this failure. Change 6797e49 (v2v-conversion-host) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 6797e49 (v2v-conversion-host) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/v2v-conversion-host/commit/0e5d6dd94e59489d7f04a49… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/v2v-conversion-host/commit/6797e499cb10860cbe4684c… For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16128/

1 0