February 2017 - Users - Ovirt List Archives

by Andrea Fagiani

Hi, We've got a 8-host cluster running oVirt 4.1; each host is connected via iscsi to a EQL 4100 storage (2x). Most of the VMs use barely any IOPS, however on our storage controller we've noticed a constant steam of reads, about 2000 IOPS; any idea what might cause the ovirt hosts to hammer on the storage so much? Looking at iotop, it seems that systemd-udevd is being activated every few seconds (and its IO% is usually fairly high) so I assume this might be somehow related. Thanks, Andrea

7 years, 9 months

8
19
0 / 0

questions about migrating to self-hosted engine from bare-metal

by cmc

Hi, I want to migrate from a bare-metal engine to a self-hosted one. I'm following the guide at: http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_M... I've created a new VM with el 7.3 on the existing cluster, and used an NFS share as storage on another VM, (which does not fill up). It gets most of the way through and then mentions failing to execute 'closing_ip', and fails to start the VM: [ INFO ] Creating Image for 'hosted-engine.lockspace' ... [ INFO ] Image for 'hosted-engine.lockspace' created successfully [ INFO ] Creating Image for 'hosted-engine.metadata' ... [ INFO ] Image for 'hosted-engine.metadata' created successfully [ INFO ] Creating VM Image [ INFO ] Extracting disk image from OVF archive (could take a few minutes depending on archive size) [ INFO ] Validating pre-allocated volume size [ INFO ] Uploading volume to data domain (could take a few minutes depending on archive size) [ INFO ] Image successfully imported from OVF [ INFO ] Destroying Storage Pool [ INFO ] Start monitoring domain [ INFO ] Configuring VM [ INFO ] Updating hosted-engine configuration [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up The following network ports should be opened: tcp:5900 tcp:5901 tcp:9090 udp:5900 udp:5901 An example of the required configuration for iptables can be found at: /etc/ovirt-hosted-engine/iptables.example In order to configure firewalld, copy the files from /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services and execute the following commands: firewall-cmd -service hosted-cockpit firewall-cmd -service hosted-console [ INFO ] Creating VM [ ERROR ] Failed to execute stage 'Closing up': The VM is not powering up: please check VDSM logs [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20170213142939.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue,fix and redeploy Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20170213141937-0wgc31.log In the vdsm log, it appears to be complaining about the volume not existing, but I can see it (it is on NFS) I've attached the vdsm.log and answers.conf Any help appreciated. Thanks, Cam

7 years, 9 months

3
6
0 / 0

Updated Invitation: Deep Dive: Ansible modules for oVirt @ Tue Feb 14, 2017 4pm - 5pm (CET) (users@ovirt.org)

by omachace＠redhat.com

This event has been changed. Title: Deep Dive: Ansible modules for oVirt In this presentation will do a short introduction to Ansible. Then we will focus how to use Ansible with oVirt. Ansible 2.3 ships many oVirt modules, which can help you orchestrate your oVirt infrastructure. We will show a demo how to use them. Ansible 2.3 also ships dynamic inventory for oVirt, we will show how to use it as well. Stream: This link was created from incorrect account and is not working: https://www.youtube.com/watch?v=BgohrQ1itzM This link is *CORRECT* one: https://www.youtube.com/watch?v=cpYSHF5eDbI Slides: https://redhat.slides.com/omachace/ansbile-modules-for-ovirt Docs: http://www.ovirt.org/develop/release-management/features/infra/ansible_mo... http://docs.ansible.com/ansible/list_of_cloud_modules.html#ovirt (changed) When: Tue Feb 14, 2017 4pm – 5pm Central European Time - Prague Calendar: users(a)ovirt.org Who: (Guest list is too large to display) Event details: https://www.google.com/calendar/event?action=VIEW&eid=cTJpaWdkaWpuc2lkbmh... Invitation from Google Calendar: https://www.google.com/calendar/ You are receiving this courtesy email at the account users(a)ovirt.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://www.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to modify your RSVP response. Learn more at https://support.google.com/calendar/answer/37135#forwarding

7 years, 9 months

1
0
0 / 0

Bandiwdth limit on a Virtual Machine

by Fernando Frediani

Hello. Is there any limitation of bandwidth for a Virtual Machine per default ? I have a host with a bonding of 3 x 1Gb and the VM is connected to that bonding. On the Engine interface on the VM status I see "Network" and it has a percentage and a tiny graph. What that percentage is related to ? 1Gb ? 3Gb ? 10Gb ? Is there anything that has to be done in order the VM can achieve speeds over 1Gbps ? Fernando

7 years, 9 months

2
4
0 / 0

Storage domain experienced a high latency

by Grundmann, Christian

--_000_6A17C71B52524C408E7AAF69103E9E490FAE98C4fabamailserverf_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, got a new FC Storage (EMC Unity 300F) which is seen by my Hosts additional = to my old Storage for Migration. New Storage has only on PATH until Migration is done. I already have a few VMs running on the new Storage without Problem. But after starting some VMs (don't really no whats the difference to workin= g ones), the Path for new Storage fails. Engine tells me: Storage Domain <storagedomain> experienced a high latency = of 22.4875 seconds from host <host> Where can I start looking? In /var/log/messages I found: Feb 8 09:03:53 ovirtnode01 multipathd: 360060160422143002a38935800ae2760: = sdd - emc_clariion_checker: Active path is healthy. Feb 8 09:03:53 ovirtnode01 multipathd: 8:48: reinstated Feb 8 09:03:53 ovirtnode01 multipathd: 360060160422143002a38935800ae2760: = remaining active paths: 1 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 8 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 5833475 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 5833475 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967168 Feb 8 09:03:53 ovirtnode01 kernel: Buffer I/O error on dev dm-207, logical= block 97, async page read Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967168 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967280 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967280 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 0 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 0 Feb 8 09:03:53 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967168 Feb 8 09:03:53 ovirtnode01 kernel: device-mapper: multipath: Reinstating p= ath 8:48. Feb 8 09:03:53 ovirtnode01 kernel: sd 3:0:0:22: alua: port group 01 state = A preferred supports tolUsNA Feb 8 09:03:53 ovirtnode01 sanlock[5192]: 2017-02-08 09:03:53+0100 151809 = [11772]: s59 add_lockspace fail result -202 Feb 8 09:04:05 ovirtnode01 multipathd: dm-33: remove map (uevent) Feb 8 09:04:05 ovirtnode01 multipathd: dm-33: devmap not registered, can't= remove Feb 8 09:04:05 ovirtnode01 multipathd: dm-33: remove map (uevent) Feb 8 09:04:06 ovirtnode01 multipathd: dm-34: remove map (uevent) Feb 8 09:04:06 ovirtnode01 multipathd: dm-34: devmap not registered, can't= remove Feb 8 09:04:06 ovirtnode01 multipathd: dm-34: remove map (uevent) Feb 8 09:04:08 ovirtnode01 multipathd: dm-33: remove map (uevent) Feb 8 09:04:08 ovirtnode01 multipathd: dm-33: devmap not registered, can't= remove Feb 8 09:04:08 ovirtnode01 multipathd: dm-33: remove map (uevent) Feb 8 09:04:08 ovirtnode01 kernel: dd: sending ioctl 80306d02 to a partiti= on! Feb 8 09:04:24 ovirtnode01 sanlock[5192]: 2017-02-08 09:04:24+0100 151840 = [15589]: read_sectors delta_leader offset 2560 rv -202 /dev/f9b70017-0a34-4= 7bc-bf2f-dfc70200a347/ids Feb 8 09:04:34 ovirtnode01 sanlock[5192]: 2017-02-08 09:04:34+0100 151850 = [15589]: f9b70017 close_task_aio 0 0x7fd78c0008c0 busy Feb 8 09:04:39 ovirtnode01 multipathd: 360060160422143002a38935800ae2760: = sdd - emc_clariion_checker: Read error for WWN 60060160422143002a38935800ae= 2760. Sense data are 0x0/0x0/0x0. Feb 8 09:04:39 ovirtnode01 multipathd: checker failed path 8:48 in map 360= 060160422143002a38935800ae2760 Feb 8 09:04:39 ovirtnode01 multipathd: 360060160422143002a38935800ae2760: = remaining active paths: 0 Feb 8 09:04:39 ovirtnode01 kernel: qla2xxx [0000:11:00.0]-801c:3: Abort co= mmand issued nexus=3D3:0:22 -- 1 2002. Feb 8 09:04:39 ovirtnode01 kernel: device-mapper: multipath: Failing path = 8:48. Feb 8 09:04:40 ovirtnode01 kernel: qla2xxx [0000:11:00.0]-801c:3: Abort co= mmand issued nexus=3D3:0:22 -- 1 2002. Feb 8 09:04:42 ovirtnode01 kernel: blk_update_request: 8 callbacks suppres= sed Feb 8 09:04:42 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967168 Feb 8 09:04:42 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967280 Feb 8 09:04:42 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 0 Feb 8 09:04:42 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967168 Feb 8 09:04:42 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 4294967280 Feb 8 09:04:42 ovirtnode01 kernel: blk_update_request: I/O error, dev dm-1= 0, sector 0 multipath -ll output for this Domain 360060160422143002a38935800ae2760 dm-10 DGC ,VRAID size=3D2.0T features=3D'1 retain_attached_hw_handler' hwhandler=3D'1 alua' = wp=3Drw `-+- policy=3D'service-time 0' prio=3D50 status=3Dactive `- 3:0:0:22 sdd 8:48 active ready running Thx Christian --_000_6A17C71B52524C408E7AAF69103E9E490FAE98C4fabamailserverf_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"DE-AT" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> Hi,<o:p></o:p> got a new FC Storage (EMC Unity= 300F) which is seen by my Hosts additional to my old Storage for Migration= .<o:p></o:p> New Storage has only on PATH un= til Migration is done.<o:p></o:p> I already have a few VMs runnin= g on the new Storage without Problem.<o:p></o:p> But after starting some VMs (do= n’t really no whats the difference to working ones), the Path for new= Storage fails.<o:p></o:p> <o:p> </o:p> Engine tells me: Storage Domain= <storagedomain> experienced a high latency of 22.4875 seconds from h= ost <host><o:p></o:p> <o:p> </o:p> Where can I start looking?<o:p>= </o:p> <o:p> </o:p> In /var/log/messages I found:<o= :p></o:p> <o:p> </o:p> Feb  8 09:03:53 ovirtnode0= 1 multipathd: 360060160422143002a38935800ae2760: sdd - emc_clariion_checker= : Active path is healthy.<o:p></o:p> Feb  8 09:03:53 ovirtnode0= 1 multipathd: 8:48: reinstated<o:p></o:p> Feb  8 09:03:53 ovirtnode0= 1 multipathd: 360060160422143002a38935800ae2760: remaining active paths: 1<= o:p></o:p> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 8<o:p></o:p></sp= an> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 5833475<o:p></o:= p> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 5833475<o:p></o:= p> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967168<o:p><= /o:p> Feb  8 09:03:53 ovirtnode0= 1 kernel: Buffer I/O error on dev dm-207, logical block 97, async page read= <o:p></o:p> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967168<o:p><= /o:p> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967280<o:p><= /o:p> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967280<o:p><= /o:p> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 0<o:p></o:p></sp= an> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 0<o:p></o:p></sp= an> Feb  8 09:03:53 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967168<o:p><= /o:p> Feb  8 09:03:53 ovirtnode0= 1 kernel: device-mapper: multipath: Reinstating path 8:48.<o:p></o:p></span= > Feb  8 09:03:53 ovirtnode0= 1 kernel: sd 3:0:0:22: alua: port group 01 state A preferred supports tolUs= NA<o:p></o:p> Feb  8 09:03:53 ovirtnode0= 1 sanlock[5192]: 2017-02-08 09:03:53+0100 151809 [11772]: s59 add_locks= pace fail result -202<o:p></o:p> Feb  8 09:04:05 ovirtnode0= 1 multipathd: dm-33: remove map (uevent)<o:p></o:p> Feb  8 09:04:05 ovirtnode0= 1 multipathd: dm-33: devmap not registered, can't remove<o:p></o:p><= /p> Feb  8 09:04:05 ovirtnode0= 1 multipathd: dm-33: remove map (uevent)<o:p></o:p> Feb  8 09:04:06 ovirtnode0= 1 multipathd: dm-34: remove map (uevent)<o:p></o:p> Feb  8 09:04:06 ovirtnode0= 1 multipathd: dm-34: devmap not registered, can't remove<o:p></o:p><= /p> Feb  8 09:04:06 ovirtnode0= 1 multipathd: dm-34: remove map (uevent)<o:p></o:p> Feb  8 09:04:08 ovirtnode0= 1 multipathd: dm-33: remove map (uevent)<o:p></o:p> Feb  8 09:04:08 ovirtnode0= 1 multipathd: dm-33: devmap not registered, can't remove<o:p></o:p><= /p> Feb  8 09:04:08 ovirtnode0= 1 multipathd: dm-33: remove map (uevent)<o:p></o:p> Feb  8 09:04:08 ovirtnode0= 1 kernel: dd: sending ioctl 80306d02 to a partition!<o:p></o:p> Feb  8 09:04:24 ovirtnode0= 1 sanlock[5192]: 2017-02-08 09:04:24+0100 151840 [15589]: read_sectors = delta_leader offset 2560 rv -202 /dev/f9b70017-0a34-47bc-bf2f-dfc70200a347/= ids<o:p></o:p> Feb  8 09:04:34 ovirtnode0= 1 sanlock[5192]: 2017-02-08 09:04:34+0100 151850 [15589]: f9b70017 clos= e_task_aio 0 0x7fd78c0008c0 busy<o:p></o:p> Feb  8 09:04:39 ovirtnode0= 1 multipathd: 360060160422143002a38935800ae2760: sdd - emc_clariion_checker= : Read error for WWN 60060160422143002a38935800ae2760.  Sense data are= 0x0/0x0/0x0.<o:p></o:p> Feb  8 09:04:39 ovirtnode0= 1 multipathd: checker failed path 8:48 in map 360060160422143002a38935800ae= 2760<o:p></o:p> Feb  8 09:04:39 ovirtnode0= 1 multipathd: 360060160422143002a38935800ae2760: remaining active paths: 0<= o:p></o:p> Feb  8 09:04:39 ovirtnode0= 1 kernel: qla2xxx [0000:11:00.0]-801c:3: Abort command issued nexus=3D3:0:2= 2 --  1 2002.<o:p></o:p> Feb  8 09:04:39 ovirtnode0= 1 kernel: device-mapper: multipath: Failing path 8:48.<o:p></o:p></p= > Feb  8 09:04:40 ovirtnode0= 1 kernel: qla2xxx [0000:11:00.0]-801c:3: Abort command issued nexus=3D3:0:2= 2 --  1 2002.<o:p></o:p> Feb  8 09:04:42 ovirtnode0= 1 kernel: blk_update_request: 8 callbacks suppressed<o:p></o:p> Feb  8 09:04:42 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967168<o:p><= /o:p> Feb  8 09:04:42 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967280<o:p><= /o:p> Feb  8 09:04:42 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 0<o:p></o:p></sp= an> Feb  8 09:04:42 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967168<o:p><= /o:p> Feb  8 09:04:42 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 4294967280<o:p><= /o:p> Feb  8 09:04:42 ovirtnode0= 1 kernel: blk_update_request: I/O error, dev dm-10, sector 0<o:p></o:p></sp= an> <o:p> </o:p> <o:p> </o:p> multipath -ll output for this D= omain<o:p></o:p> <o:p> </o:p> 360060160422143002a38935800ae27= 60 dm-10 DGC     ,VRAID<o:p></o:p> size=3D2.0T features=3D'1 retai= n_attached_hw_handler' hwhandler=3D'1 alua' wp=3Drw<o:p></o:p> `-+- policy=3D'service-time= 0' prio=3D50 status=3Dactive<o:p></o:p>   `- 3:0:0:22 sdd 8:48&nbs= p; active ready  running<o:p></o:p> <o:p> </o:p> <o:p> </o:p> Thx Christian<o:p></o:p>= <o:p> </o:p> <o:p> </o:p> </div> </body> </html> --_000_6A17C71B52524C408E7AAF69103E9E490FAE98C4fabamailserverf_--

7 years, 9 months

2
6
0 / 0

Ovirt not seeing cinder usage

by Jordan Conway

Hello, Is it normal to not see the usage of a ceph backed cinder storage domain? If not, can someone point me in the right direction to see what I should be troubleshooting, I don't see anything obvious in vdsm/engine logs. This is what I see on the general tab of the storage domain: Size:[N/A] Available:[N/A] Used:[N/A] Allocated: 690 GB Over Allocation Ratio: 0% Warning Low Space Indicator: 0% (0 GB) Critical Space Action Blocker: < 1 GB Thank you, Jordan Conway

7 years, 9 months

1
0
0 / 0

Upgrading oVirt-Node-NG from 4.0.3 to 4.0.6

by Thomas Kendall

We recently migrated from 3.6 to 4.0, but I'm a little confused about how to keep the nodes up to date. I see the auto-updates come through for my 4.0.3 nodes, but they don't seem to upgrade them to the newer 4.0.x releases. Is there a way to do this upgrade? I have two nodes that were installed with 4.0.3, and I would like to bring them up to the same version as everything else. For reference, the 4.0.3 nodes were built off the 4.0-2016083011 iso, and the 4.0.6 nodes were built off the 4.0-2017011712 iso. Thanks, Thomas

7 years, 9 months

4
4
0 / 0

missing hvc0 device on hosted engine

by Berger, Sandy

--_000_DM5PR05MB3161434BD7A421FDC8D5FBCAD5400DM5PR05MB3161namp_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I've been running oVirt 4.0.x for a while now and upgraded the engine and h= osts to 4.1. Sometimes, on both 4.0 and 4.1, trying to run the "hosted-engi= ne -console" command gives the following results: The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null> Once this starts occurring, it never works again. When this happens I note that the hvc0 device does not exist in /dev and th= erefore there is no getty process running for that device. I notice that th= e "Enable VirtIO serial console" box is not checked on the hosted engine VM= but when I check it and click OK it's unchecked again when I open up the e= dit window again. How do I get console control back from my oVirt hosts? Thank you, Sandy Berger Follow Us: Facebook<http://www.qg.com/social1> | Twitter<http://www.qg.com/= social2> | LinkedIn<http://www.qg.com/social3> | YouTube<http://www.qg.com/= social4> --_000_DM5PR05MB3161434BD7A421FDC8D5FBCAD5400DM5PR05MB3161namp_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> I’ve been running oVirt 4.0.x for a while now = and upgraded the engine and hosts to 4.1. Sometimes, on both 4.0 and 4.1, t= rying to run the “hosted-engine –console” command gives t= he following results:<o:p></o:p> <o:p> </o:p> = The engine VM is running on this host<o:p></o:p> = Connected to domain HostedEngine<o:p></o:p> = Escape character is ^]<o:p></o:p> = error: internal error: cannot find character device <null><o:p></o:p>= <o:p> </o:p> Once this starts occurring, it never works again.<o:= p></o:p> <o:p> </o:p> When this happens I note that the hvc0 device does n= ot exist in /dev and therefore there is no getty process running for that d= evice. I notice that the “Enable VirtIO serial console” box is = not checked on the hosted engine VM but when I check it and click OK it’s unchecked again when I open up the edit w= indow again.<o:p></o:p> <o:p> </o:p> How do I get console control back from my oVirt host= s?<o:p></o:p> <o:p> </o:p> Thank you,<o:p></o:p> <o:p> </o:p> Sandy Berger<o:p></o:p> <o:p> </o:p> </div> Follow Us: <a href=3D"http://www.qg.com/social1">Facebook</a> | <a href=3D"= http://www.qg.com/social2"> Twitter</a> | <a href=3D"http://www.qg.com/social3">LinkedIn</a> | <a href= =3D"http://www.qg.com/social4"> YouTube</a> </body> </html> --_000_DM5PR05MB3161434BD7A421FDC8D5FBCAD5400DM5PR05MB3161namp_--

7 years, 9 months

3
4
0 / 0

Current state of UI brick management when using dedicated interfaces for ovirtmgmt & gluster?

by Doug Ingham

Hey Guys, I currently use dedicated interfaces & hostnames to separate gluster traffic on my "hyperconverged" hosts. For example, the first node uses "v0" for its management interface & "s0" for its gluster interface. With this setup, I notice that all functions under the "Volumes" tab work, however I'm unable to import storage domains with "Use managed gluster", and hosts' bricks aren't listed under the "Hosts" tab. My engine log is also full of entries such as this... 2017-02-10 03:25:07,155-03 WARN [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn] (DefaultQuartzScheduler3) [78aef637] Could not add brick 's0:/gluster/data-novo/brick' to volume 'bded65c7-e79e-4bc9-9630-36a69ad2e684' - server uuid 'a9d062c6-7d01-404f-ab0c-3ed468e60c91' not found in cluster '00000002-0002-0002-0002-00000000017a' 2017-02-10 03:25:09,157-03 WARN [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesHealInfoReturn] (DefaultQuartzScheduler10) [6828f9a7] Could not fetch heal info for brick 's0:/gluster/data-novo/brick' - server uuid 'a9d062c6-7d01-404f-ab0c-3ed468e60c91' not found I'm wondering whether the different hostnames used to configure each of the interfaces is casuing the confusion? So...is there something wrong, or is this still an unsupported configuration? Cheers, -- Doug

7 years, 9 months

2
1
0 / 0

Issue with Moving Disks

by Bryan Sockel

Hi, I attempted to move a few disks from a glusterFS to an ISCSI file system. I have number of errors during the process, and it looks like a few of the disk moves are hung. They are hung at various percentages. in the events, it says moving Disk X from A to B, validation completes but i copying volume returns with an error. Is there a way to kill the move process so i can have access back to the VM's? Thanks

7 years, 9 months

3
4
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users February 2017