host node non-operational
by Angel R. Gonzalez
Hello,
I've installed a engine server and 2 host nodes. After install the 2
nodes I've configured a nfs domain storage in the first node. After few
minutes, the second host is down and I dont put it online.
The log in the engine show:
>Host node2 cannot access the Storage Domain(s) nfsexport_node1
attached to the Data Center Labs. Setting Host state to Non-Operational.
The nfsexport Storage Domain Format is V4, but in the /etc/nfsmount.conf
Defaultproto=tcp
Defaultvers=3
Nfsvers=3
Also I've added the line
NFS4_SUPPORT="no"
to /etc/sysconfig/nfs file
The node1's iptables rules are:
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT icmp -- anywhere anywhere
ACCEPT all -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere tcp dpt:54321
ACCEPT tcp -- anywhere anywhere tcp dpt:54322
ACCEPT tcp -- anywhere anywhere tcp dpt:sunrpc
ACCEPT udp -- anywhere anywhere udp dpt:sunrpc
ACCEPT tcp -- anywhere anywhere tcp dpt:ssh
ACCEPT udp -- anywhere anywhere udp dpt:snmp
ACCEPT tcp -- anywhere anywhere tcp dpt:websm
ACCEPT tcp -- anywhere anywhere tcp dpt:16514
ACCEPT tcp -- anywhere anywhere multiport dports
rockwell-csp2
ACCEPT tcp -- anywhere anywhere multiport dports rfb:6923
ACCEPT tcp -- anywhere anywhere multiport dports
49152:49216
ACCEPT tcp -- anywhere anywhere tcp dpt:nfs
ACCEPT udp -- anywhere anywhere udp dpt:nfs
ACCEPT tcp -- anywhere anywhere tcp dpt:mountd
ACCEPT udp -- anywhere anywhere udp dpt:mountd
REJECT all -- anywhere anywhere reject-with
icmp-host-prohibited
And the output of showmount -e command in a terminal of node1 is:
>/nfs/data *
But the output of showmount -e node1 in a terminal of node2 is
>clnt_create: RPC: Port mapper failure - Unable to receive: errno 113
(No route to host)
Any help?
Thanks you in advance.
Ángel González
8 years
Custom iptables rules usage
by Leon Goldberg
Hey,
We've been wondering whether the ability to add custom iptables rules
to be deployed on hosts sees any usage.
Currently custom iptable rules are stored in IPTablesConfigSiteCustom
and are defaulted to an empty string.
We're planning to add host firewalld configuration deployment and are
looking to determine whether custom rule support should be implemented
as well.
Thanks,
Leon
8 years
Error on Adding Host
by FERNANDO FREDIANI
Hi folks.
I think I have been hit by the most annoying error you can get on oVirt.
I have removed a Host from Engine, re-installed it with the latest
ovirt-node-ng ISO, tried to add the freshly installed Host back to Engine
and got the following error:
"Command returned failure code 1 during SSH session"
The host has the same FQDN as before and I have cleaned the SSH from the
known_hosts file in the Engine before trying to add it on the web interface.
I have also tried this process with 2 different ISO files:
- ovirt-node-ng-installer-ovirt-4.1-pre-2017030911.iso
- ovirt-node-ng-installer-ovirt-4.1-pre-2017031104.iso
And the Engine is version 4.1.1.4-1
Have searched for this error and there are a lot of people affected but not
a single solution solves it.
Please give some light.
Thanks
Fernando
8 years
Re: [ovirt-users] virt-manager not able to connect to my ovirt-instance
by Staniforth, Paul
--_000_daf48dfd7bbc4a5093d4e1d74bd2bafbemailandroidcom_
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64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--_000_daf48dfd7bbc4a5093d4e1d74bd2bafbemailandroidcom_
Content-Type: text/html; charset="utf-8"
Content-ID: <0E081B7F19B8314ABCD2751FA11B13E2(a)leedsbeckett.ac.uk>
Content-Transfer-Encoding: base64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--_000_daf48dfd7bbc4a5093d4e1d74bd2bafbemailandroidcom_--
8 years
Can I post email with screen shots as attachment ?
by John Joseph
------=_Part_4096364_804312568.1489383882131
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Hi,Like to introduce myself, I am Joseph John some years back I had tried oVirt, now after very long time I am trying to setup oVirt and trying to prepare for demo.
Was not active in the mailing list for very long time, now I am facing issues with ovirt, like to post the experience, eg I would like to show that my connect to CD drive option drop down is not working, so Can I send a screen shot attached along with the emailThanks
Joseph John
------=_Part_4096364_804312568.1489383882131
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<html><head></head><body><div style=3D"color:#000; background-color:#fff; f=
ont-family:Helvetica Neue-Light, Helvetica Neue Light, Helvetica Neue, Helv=
etica, Arial, Lucida Grande, Sans-Serif;font-size:16px"><div id=3D"yui_3_16=
_0_ym19_1_1489381321049_24802">Hi,</div><div id=3D"yui_3_16_0_ym19_1_148938=
1321049_24906">Like to introduce myself, I am Joseph John some years back I=
had tried oVirt, now after very long time I am trying to setup oVirt and t=
rying to prepare for demo.<br></div><div id=3D"yui_3_16_0_ym19_1_1489381321=
049_24898">Was not active in the mailing list for very long time, now I am =
facing issues with ovirt, like to post the experience, eg I would like to s=
how that my connect to CD drive option drop down is not working, so Can I s=
end a screen shot attached along with the email</div><div id=3D"yui_3_16_0_=
ym19_1_1489381321049_25033">Thanks <br></div><div dir=3D"ltr" id=3D"yui_3_1=
6_0_ym19_1_1489381321049_25034">Joseph John <br></div><div dir=3D"ltr" id=
=3D"yui_3_16_0_ym19_1_1489381321049_25035"><br></div></div></body></html>
------=_Part_4096364_804312568.1489383882131--
8 years
Chrome and Portal Cert
by Brett Holcomb
I'm running 3.6. version of oVirt on Centos 7.2 physical server in a
hosted engine configuration environment and I keep getting the untrusted
site from Chrome stable current version browser. I've retrieved the cert
from https://myengine/ca.crt and saved it. I then go to Chrome and
Settings->Advanced->Manage Certificates and import it to trusted
authorities and check all the boxes. Chrome enters it and seems happy
until I go to the site the next time. My client is Fedora 24.
I have checked the oVirt docs and ignoring the ones with broken links it
appears I'm following the correct procedure. I assume Google Chrome is
the culprit and checking on how to enter certs into Google produces
many, many different ways most that are wrong. The current version
forces you to the developer mode security tab to view the cert. I've
done all that and restarted Chrome and still get the insecure error.
If someone has successfully gotten the oVirt cert to work in Chrome on
Linux (Fedora 24) I would appreciate a post on how it was done.
Thanks.
8 years
make nodectl happy: node partitioning in kickstart
by /dev/null
Hello list,
I am trying to get kickstart partitioning for node setup working, but nodectl keeps
complaining:
Basic storage ... OK
Initialized VG ... OK
Initialized Thin Pool ... OK
Initialized LVs ... OK
Thin storage ... FAILED - It looks like the LVM layout is not correct. The reason could
be an incorrect installation.
Checking from thin metadata ... ERROR
Exception in '<function <lambda> at 0x1fab2a8>': AssertionError()
vdsmd ... OK
My install source:
ovirt-node-ng-installer-ovirt-4.1-2017020112.iso
Kickstart partitioning:
# partitioning information
# taken from https://bugzilla.redhat.com/show_bug.cgi?id=1369874#c5
#
clearpart --all
part /boot --fstype xfs --size=1000 --ondisk=sda
part pv.01 --size=42000 --grow
volgroup HostVG pv.01
logvol swap --vgname=HostVG --name=swap --fstype=swap --recommended
logvol none --vgname=HostVG --name=HostPool --thinpool --size=40000 --grow
logvol / --vgname=HostVG --name=root --thin --fstype=ext4 --poolname=HostPool
--fsoptions="defaults,discard" --size=6000 --grow
logvol /var --vgname=HostVG --name=var --thin --fstype=ext4 --poolname=HostPool
--fsoptions="defaults,discard" --size=15000
logvol /var/log --vgname=HostVG --name=var_log --thin --fstype=ext4 --poolname=HostPool
--fsoptions="defaults,discard" --size=8000
logvol /var/log/audit --vgname=HostVG --name=var_audit --thin --fstype=ext4
--poolname=HostPool --fsoptions="defaults,discard" --size=2000
logvol /home --vgname=HostVG --name=home --thin --fstype=ext4 --poolname=HostPool
--fsoptions="defaults,discard" --size=1000
logvol /tmp --vgname=HostVG --name=tmp --thin --fstype=ext4 --poolname=HostPool
--fsoptions="defaults,discard" --size=1000
I have no idea what nodectl is really complaining about. Can you please help me finding
out, which checks fail and how to solve that? Are there komplete kickstart files around
for node deployment (could not find them on the web)?
Many thanks in advance!
/dev/null
--
Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht
und ist - aktuelle Virenscanner vorausgesetzt - sauber.
For all your IT requirements visit: http://www.transtec.co.uk
8 years
Trouble installing windows 10
by Jim Fuhr
--_000_CY4PR15MB1175EA70F6CD76D82AF597D0C8390CY4PR15MB1175namp_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
I'm trying out Ovirt 4.1 and I have it working fine with Linux VMs. But, w=
hen I try to install Windows 10 using the virtio-win drivers for the hard-d=
rive Windows 10 refuses the drivers because they are not signed. I don't k=
now how tell Windows 10 to ignore the missing signature.
I appreciate any help you can provide.
Thanks,
Jim
--_000_CY4PR15MB1175EA70F6CD76D82AF597D0C8390CY4PR15MB1175namp_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72">
<div class=3D"WordSection1">
<p class=3D"MsoNormal">I’m trying out Ovirt 4.1 and I have it working=
fine with Linux VMs. But, when I try to install Windows 10 using the=
virtio-win drivers for the hard-drive Windows 10 refuses the drivers becau=
se they are not signed. I don’t know how tell
Windows 10 to ignore the missing signature. <o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">I appreciate any help you can provide.<o:p></o:p></p=
>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Thanks,<o:p></o:p></p>
<p class=3D"MsoNormal">Jim<o:p></o:p></p>
</div>
</body>
</html>
--_000_CY4PR15MB1175EA70F6CD76D82AF597D0C8390CY4PR15MB1175namp_--
8 years
Cluster upgrade from 3.6 to 4.1 fails
by jvdwege
--=_bdf9c6080ac5bd75fc88a8bc18490e66
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
As per the subject I'm trying to upgrade my ovirt install and sofar the
upgrade has been smooth.
I'm running hosted-engine in Centos7.3 and my hosts are running Fedora24
now with ovirt-4.1
If I try to upgrade my cluster from version 3.6 to 4.0 or 4.1 I receive
an error message and can't find a solution using google. First I get the
following message:
All running VMs will be temporarily reconfigured to use the previous
cluster compatibility version and marked pending configuration change.
In order to change the cluster compatibility version of the VM to a new
version, the VM needs to be manually shut down and restarted.
There are 1 running VM(s) affected by this change.
Are you sure you want to change the Cluster Compatibility Version?
Yes, I want to change version :-) so I click OK
I then get the following error message:
Error while executing action:
* Cannot edit Cluster. Illegal number of monitors is provided, max
allowed number of monitors is 1 for VNC and the max number in the
ValidNumOfMonitors configuration variable for SPICE.
* Cannot edit VM. Illegal number of monitors is provided, max allowed
number of monitors is 1 for VNC and the max number in the
ValidNumOfMonitors configuration variable for SPICE.
Anyone has seen this before and is able to help?
Thanks,
Joop
--=_bdf9c6080ac5bd75fc88a8bc18490e66
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; charset=
=3DUTF-8" /></head><body style=3D'font-size: 10pt; font-family: Verdana,Gen=
eva,sans-serif'>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
As per the subject I'm trying to upgrade my ovirt install and sofar the upg=
rade has been smooth.<br /> I'm running hosted-engine in Centos7.3 and my h=
osts are running Fedora24 now with ovirt-4.1<br /> If I try to upgrade my c=
luster from version 3.6 to 4.0 or 4.1 I receive an error message and can't =
find a solution using google. First I get the following message:<br /> <br =
/> <span style=3D"font-family: courier new,courier,monospace;">All running =
VMs will be temporarily reconfigured to use the previous cluster compatibil=
ity version and marked pending configuration change.</span><br /><span styl=
e=3D"font-family: courier new,courier,monospace;"> In order to change the c=
luster compatibility version of the VM to a new version, the VM needs to be=
manually shut down and restarted.</span><br /><span style=3D"font-family: =
courier new,courier,monospace;"> There are 1 running VM(s) affected by this=
change.</span><br /> <br /><span style=3D"font-family: courier new,courier=
,monospace;"> Are you sure you want to change the Cluster Compatibility Ver=
sion?</span><br /> <br /> Yes, I want to change version :-) so I click OK</=
div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
I then get the following error message:</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
<span style=3D"font-family: courier new,courier,monospace;">Error while exe=
cuting action: </span><br /><br />
<ul style=3D"margin-top: 0;">
<li><span style=3D"font-family: courier new,courier,monospace;">Cannot edit=
Cluster. Illegal number of monitors is provided, max allowed number of mon=
itors is 1 for VNC and the max number in the ValidNumOfMonitors configurati=
on variable for SPICE.</span></li>
<li><span style=3D"font-family: courier new,courier,monospace;">Cannot edit=
VM. Illegal number of monitors is provided, max allowed number of monitors=
is 1 for VNC and the max number in the ValidNumOfMonitors configuration va=
riable for SPICE.</span></li>
</ul>
</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
Anyone has seen this before and is able to help?</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
Thanks,</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
Joop</div>
<div class=3D"pre" style=3D"margin: 0; padding: 0; font-family: monospace">=
</div>
</body></html>
--=_bdf9c6080ac5bd75fc88a8bc18490e66--
8 years
Issue about integrating Ovirt 4 and OSP
by Alessio Dini
Hello all,
in our lab we are trying to integrate Ovirt 4 and OSP.
Actually we have OSP deployed via packstack on the system called
neutron.local, a single hypervisor called rhvh.local and hosted engine
called rhvm.local.
We correctly added neutron.local as neutron external provider.
The issue we are facing is: trying to poweron a Ovirt vm with neutron
network as vnic will fail with "Cannot get interface MTU on
"internal-net":No such Device.
Looking via openstack horizon we can see that internal-net has 1500 as MTU.
We also configured the OnlyRequiredNetworksMandatoryForVdsSelection
property as true on the Ovirt manager.
What we are missing?
Thank you all for your time
Best Regards
Alessio Dini
8 years
