February 2024 - Users - Ovirt List Archives

Host deploy failure: Configure OVN for oVirt

by stephan.badenhorst＠fnb.co.za

Good day, I am running into a problem during host deploy via the oVirt engine GUI since upgrading to ovirt-engine-4.5.5-1.el8. The "Configure OVN for oVirt" task seem to fail when trying to run the vdsm-tool ovn-config command. Host deploy used to work fine when the engine was on version 4.5.4. Anyone that can guide me on the right path to get past this issue? Does not seem to be a new problem - https://lists.ovirt.org/archives/list/users@ovirt.org/thread/IDLGSBQFX35E... Log extract: 2024-02-01 14:48:19 SAST - TASK [ovirt-provider-ovn-driver : Configure OVN for oVirt] ********************* . . . "stdout" : "fatal: [mob-r1-l-ovirt-aa-1-23.x.fnb.co.za]: FAILED! => {\"changed\": true, \"cmd\": [\"vdsm-tool\", \"ovn-config\", \"192.168.2.100\", \"host23.mydomain.com\"], \"delta\": \"0:00:00.538143\", \"end \": \"2024-02-01 14:48:20.596823\", \"msg\": \"non-zero return code\", \"rc\": 1, \"start\": \"2024-02-01 14:48:20.058680\", \"stderr\": \"Traceback (most recent call last):\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/t ool/ovn_config.py\\\", line 117, in get_network\\n return networks[net_name]\\nKeyError: 'host23.mydomain.com'\\n\\nDuring handling of the above exception, another exception occurred:\\n\\nTraceback (most rec ent call last):\\n File \\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return tool_command[cmd][\\\"command\\\"](*args)\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\\n raise NetworkNotFoundError(net_name)\\nvdsm.tool.ovn _config.NetworkNotFoundError: host23.mydomain.com\", \"stderr_lines\": [\"Traceback (most recent call last):\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network \", \" return networks[net_name]\", \"KeyError: 'host23.mydomain.com'\", \"\", \"During handling of the above exception, another exception occurred:\", \"\", \"Traceback (most recent call last):\", \" File \ \\"/usr/bin/vdsm-tool\\\", line 195, in main\", \" return tool_command[cmd][\\\"command\\\"](*args)\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\", \" ip_address = get_ip_addr(get_network(network_caps(), net_name))\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\", \" raise NetworkNotFoundError(net_name)\", \"vdsm.tool.ovn_config. NetworkNotFoundError: host23.mydomain.com\"], \"stdout\": \"\", \"stdout_lines\": []}", Thanks in advance!! Stephan

7 months

3
3
0 / 0

Changing disk QoS causes segfault with IO-Threads enabled (oVirt 4.3.0.4-1.el7)

by jloh＠squiz.net

We recently upgraded to 4.3.0 and have found that when changing disk QoS settings on VMs whilst IO-Threads is enabled causes them to segfault and the VM to reboot. We've been able to replicate this across several VMs. VMs with IO-Threads disabled/turned off do not segfault when changing the QoS. Mar 1 11:49:06 srvXX kernel: IO iothread1[30468]: segfault at fffffffffffffff8 ip 0000557649f2bd24 sp 00007f80de832f60 error 5 in qemu-kvm[5576498dd000+a03000] Mar 1 11:49:06 srvXX abrt-hook-ccpp: invalid number 'iothread1' Mar 1 11:49:11 srvXX libvirtd: 2019-03-01 00:49:11.116+0000: 13365: error : qemuMonitorIORead:609 : Unable to read from monitor: Connection reset by peer Happy to supply some more logs to someone if they'll help but just wondering whether anyone else has experienced this or knows of a current fix other than turning io-threads off. Cheers.

7 months

4
3
0 / 0

virt-v2v cannot authenticate with oVirt engine API with OAuth2

by malcolm.strydom＠pacxa.com

I've been reading through archives but not able to find what i need. Essentially what I'm trying to do is migrate a larger number of VMs from our OVM environment to a new OLVM setup. In an effort to reduce lots of replication and copying of the disk image (export, convert, copy over, import etc.) I found this article which shows a pretty slick way to do it in one shot https://blogs.oracle.com/scoter/post/how-to-migrate-oracle-vm-to-oracle-l... The main command behind it all is the virt-v2v that makes it possible. It looks something like this: virt-v2v -i libvirtxml vm-test1.xml -o rhv-upload -oc https://<OLVM-server>/ovirt-engine/api -os <my storage> -op /tmp/ovirt-admin-password -of raw -oo rhv-cluster=Default -oo rhv-cafile=/root/ca.pem The problem I'm having is I cannot authenticate with my new OLVM server at the ovirt-engine/api URL. Since user/password is depricated and you must use OAuth 2.0 with a token I'm stuck. I have OLVM 4.5.4-1.0.27.el8 and from what I've read in oVirt 4.5 (not sure what version it started) they use keycloak oAuth 2.0 and the older ovirt-aaa-jdbc-tool is now deprecated. In doing some testing I found I can use curl and authenticate against the ovirt-engine/api and get a token like this: OVIRT_ENGINE_URL="https://<myolvm1>/ovirt-engine" USERNAME="admin@ovirt@internalsso" PASSWORD="<mypassword>" CLUSTER_NAME="Default" TOKEN=$(curl -k -X POST -H "Accept: application/json" -H "Content-Type: application/x-www-form-urlencoded" -d "grant_type=password &username=$USERNAME&password=$PASSWORD&scope=ovirt-app-api" $OVIRT_ENGINE_URL/sso/oauth/token | jq -r '.access_token') I was then able to query the API to validate my token works curl -k -H "Accept: application/json" -H "Authorization: Bearer $TOKEN" "$OVIRT_ENGINE_URL/api/clusters?search=name=$CLUSTER_NAME" The problem is virt-v2v does not support posting any form information or the token to authenticate. Best I can tell the -oc option is strictly the URL and if you want a username in there it's in the form of https://<name>@<server>. So even if I wrote a script and used curl to authenticate and get a token I still can't find a way to make virt-v2v use it. So I'm stuck how do I get virt-v2v working? Is there a way to re-enable the deprecated user/pass method of accessing the ovirt-engine/api ? or as a last resort a way to get virt-v2v supporting the token? Thanks for any insight Malcolm

8 months

3
5
1 / 0

Deploy oVirt Engine fail behind proxy

by Matteo Bonardi

Hi, I am trying to deploy the ovirt engine following self-hosted engine installation procedure on documentation. Deployment servers are behind a proxy and I have set it in environment and in yum.conf before run deploy. Deploy fails because ovirt engine vm cannot resolve AppStream repository url: [ INFO ] TASK [ovirt.engine-setup : Install oVirt Engine package] [ ERROR ] fatal: [localhost -> ovirt-manager.mydomain]: FAILED! => {"changed": false, "msg": "Failed to download metadata for repo 'AppStream': Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for http://mirrorlist.centos.org/?release=8&arch=x86_64&repo=AppStream&infra=... [Could not resolve host: mirrorlist.centos.org]", "rc": 1, "results": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Clean local storage pools] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20201109165237.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20201109164244-b3e8sd.log How I can set proxy for the engine vm? Ovirt version: [root@myhost ~]# rpm -qa | grep ovirt-engine-appliance ovirt-engine-appliance-4.4-20200916125954.1.el8.x86_64 [root@myhost ~]# rpm -qa | grep ovirt-hosted-engine-setup ovirt-hosted-engine-setup-2.4.6-1.el8.noarch OS version: [root@myhost ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) [root@myhost ~]# uname -a Linux myhost.mydomain 4.18.0-193.28.1.el8_2.x86_64 #1 SMP Thu Oct 22 00:20:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Thanks for the help. Regards, Matteo

8 months, 1 week

7
20
6 / 1

Ovirt 4.5 HA over NFS fails when a single host goes down

by youssef.khristo＠elsewedyintel.com

Greetings, we have recently installed ovirt as a hosted-engine with high availability on six nodes over NFS storage (no Gluster), with power management through an on-board IPMI device, and the setup was successful. All the nodes (from Supermicro) are identical in every aspect, so no hardware differences exist and no modifications to the servers' hardware were performed. The hosted-engine was deployed on a second host, where two of the six hosts only were required to host the HE VM. The network interface on each node is bonded between two physical fiber optics NICs in LACP mode with a VLAN on top, serving as the sole networking interface for the server/node, no separate VM or storage networks were needed, as the host OS, hosted-engine vm, and storage are required to be on the same network and VLAN. We started by testing the high-availability of the hosted-engine VM (as it was deployed on two of the six nodes) by rebooting or powering off one of the hosts, and the VM would migrate successfully to the second HE node. The main goal of our experiments is to test the robustness of the setup, as it is required for the cluster to remain functional even when up to two hosts are brought down (whether due to a network or power issue), however, when rebooting or powering off one of the hosts, the HE VM goes down and takes the entire cluster with it, where we can't even access the web portal. Once the host is rebooted, the HE VM and the cluster becomes functional again. Sometimes the HE VM stays down for a set amount of time (5 to 6 minutes) and then goes back up, and sometimes it goes down until the problematic host is back up. This behavior happens to other VMs as well not the the HE. We suspected an issue with the NFS storage, however, during ovirt operation it is being mounted properly over /rhev/data-center/mnt/<nfs:directory>, while the expected behavior is for the cluster to stay operational and any other VMs to be migrated to other hosts. During one of the tests, we tried to mount the NFS storage on a different directory and there was no problem, we were even able to perform commands such as ls without any issues, as well as writing a text file at the directory's root, and be able to modify it normally. We suspected a couple of things the first being that the HE is unable to fence the problematic host (the one we took down), however, power management is setup properly. The other thing we suspected is the cluster hosts (after taking down one of them) are unable to acquire storage lease, which is weird since the host in question is down and non-operational, hence no locks should be in place. The reason behind this suspicion is the following two errors that we receive frequently when one host or more goes down from the engine\ovirt-engine\engine.log file: 1- "EVENT_ID: VM_DOWN_ERROR(119), VM HostedEngine is down with error. Exit message: resource busy: Failed to acquire lock: Lease is held by another host." 2- "[<id>] Command 'GetVmLeaseInfoVDSCommand( VmLeaseVDSParameters:{expectedEngineErrors='[NoSuchVmLeaseOnDomain]', storagePoolId='<pool-id>', ignoreFailoverLimit='false', leaseId='<lease-id>', storageDomainId='<domain-id>'})' execution failed: IRSGenericException: IRSErrorException: No such lease: 'lease=<lease-id>'" This is a third warning from the /var/log/vdsm/vdsm.log file 1- "WARN (check/loop) [storage.check] Checker '/rhev/data-center/mnt/<nfs-domain:/directory>/<id>/dom_md/metadata' is blocked for 310.00 seconds (check:265)" All the tests are done without setting nodes into maintenance mode as we are simulating an emergency situation. No HE configuration were modified via the config-engine command, the default values are used. Is this a normal behavior? Are we missing something? Do we need to tweak a certain configuration using the config-engine command to get a better behavior (e.g., shorter down period)? Best regards

8 months, 2 weeks

5
6
1 / 0

Repo for mirrorlist.ovirt.org not working

by nicolas＠devels.es

Hi, We recently noticed that https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 is returning a 503 error: $ LANG=C wget https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 --2024-02-14 12:01:10-- https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 Resolving mirrorlist.ovirt.org (mirrorlist.ovirt.org)... 8.43.85.224, 2620:52:3:1:5054:ff:fef7:14a9 Connecting to mirrorlist.ovirt.org (mirrorlist.ovirt.org)|8.43.85.224|:443... connected. HTTP request sent, awaiting response... 503 Service Unavailable 2024-02-14 12:02:10 ERROR 503: Service Unavailable. Is this some scheduled downtime or is it an error? Thanks.

8 months, 3 weeks

7
6
2 / 0

Advice on upgrading oVirt 4.2 CentOS 7.x cluster to oVirt 4.5 Rocky Linux 8.9

by ovirt＠the-dawg.net

I have multiple aging clusters that I now need to upgrade both the host OS and the oVirt release. I have seen the notes about upgrading 4.2 to 4.3 and then being able to upgrade to 4.5, but what's not so clear is how to upgrade the host nodes' OS versions. After thinking about it, I wonder if this method is sane. Any advice or guidance is greatly appreciated. 1) spin up a new cluster running oVirt 4.5.x on the latest Rocky Linux release. 2) shutdown VMs on the original cluster 3) detach the domain storage 4) snapshot the domain storage (for rollback) 5) import the domain on the new cluster. 6) reload the OS on the original cluster to the new OS release (no local storage) 7) add those hosts to the new cluster

8 months, 4 weeks

2
1
1 / 0

Snapshots and mess with Storage

by thorsten.bolten＠googlemail.com

Hi, I experienced a weird Failure. I hope I explain it understandable and not too hard to read We had issues with our backups, that they can't finalize Here is a Thread someone having the same issue. https://forums.veeam.com/ovirt-kvm-f62/veeam-rhv-12-1-command-removeimage... so I made some investigations and recognized, it seems to be an Issue with Snapshot 1. I created a Snapshot https://paste.fo/c0b8e77a3400 what works 2. Then I tried to deleted the snapshot, what didn't work https://paste.fo/013e5632e0d6 So I logged in to a node and checked several things First strange thing was, I can see pvs vgs etc, I am used, that ovirt hides them in the System (on one of those nodes it's still the case) but anyways [root@ovnb05 ~]# pvs WARNING: Couldn't find device with uuid uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb. WARNING: VG 515bebca-972b-42ac-abff-d76af0071613 is missing PV uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb (last written to /dev/mapper/360002ac000000000000000880002a7fd). PV VG Fmt Attr PSize PFree /dev/mapper/360002ac000000000000000870002a7fd 515bebca-972b-42ac-abff-d76af0071613 lvm2 a-- <12.00t 10.77t /dev/sda3 rl lvm2 a-- 892.16g 0 [unknown] 515bebca-972b-42ac-abff-d76af0071613 lvm2 a-m <12.00t <12.00t So I did [root@ovnb05 ~]# pvdisplay WARNING: Couldn't find device with uuid uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb. WARNING: VG 515bebca-972b-42ac-abff-d76af0071613 is missing PV uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb (last written to /dev/mapper/360002ac000000000000000880002a7fd). --- Physical volume --- PV Name /dev/mapper/360002ac000000000000000870002a7fd VG Name 515bebca-972b-42ac-abff-d76af0071613 PV Size 12.00 TiB / not usable 384.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 98301 Free PE 88247 Allocated PE 10054 PV UUID D6Typd-s7lA-PyoI-PvrL-rd9N-mS64-VeV1j3 --- Physical volume --- PV Name [unknown] VG Name 515bebca-972b-42ac-abff-d76af0071613 PV Size 12.00 TiB / not usable 384.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 98301 Free PE 98301 Allocated PE 0 PV UUID uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb --- Physical volume --- PV Name /dev/sda3 VG Name rl PV Size 892.16 GiB / not usable 2.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 228393 Free PE 0 Allocated PE 228393 PV UUID kRe0EF-736L-QwZA-iGtM-67wp-8cr4-DKKcX2 I have never seen an unknown before, so I guess something happened to that LUN But the LUN is available and in /var/log/messages I can't find any issue with the LUN or the path etc. [root@ovnb05 data-center]# blkid |grep uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb /dev/sdi: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" /dev/sdg: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" /dev/sde: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" /dev/sdn: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" /dev/sdc: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" /dev/sdl: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" /dev/sdr: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" /dev/sdp: UUID="uHJs0a-T7R3-2H8E-15W9-cGqW-ZN1e-xsdCsb" TYPE="LVM2_member" So I did some nasty stuff, like removing it and trying to add it again, through that process it told me that there is no meta Data on the Device So at the End I am a little bit lost now. Maybe the storage was failing for some reason or maybe veeam messed something up, but what leaves me afraid is, that the Ovirt-Engine didn't show me any Problem with the Cluster or the Storage. I mean it's obvious, that there was/is a huge failure with the storage and Ovirt did not recognize neither did it alarm me. At the moment I detached the LUN from the Storage Domain and created a seperate one (cause I recognized that having several LUN's in a Storage Domain seems to be an bad Idea) and one PVS is now hidden, the other one not [root@ovnb05 data-center]# pvs PV VG Fmt Attr PSize PFree /dev/mapper/360002ac000000000000000870002a7fd 515bebca-972b-42ac-abff-d76af0071613 lvm2 a-- <12.00t 11.81t /dev/sda3 rl lvm2 a-- 892.16g 0 [root@ovnb05 data-center]# cat /etc/lvm/devices/system.devices # LVM uses devices listed in this file. # Created by LVM command vgs pid 6123 at Fri Feb 16 18:16:35 2024 VERSION=1.1.7 IDTYPE=mpath_uuid IDNAME=mpath-360002ac000000000000000870002a7fd DEVNAME=/dev/mapper/360002ac000000000000000870002a7fd PVID=D6Typds7lAPyoIPvrLrd9NmS64VeV1j3 IDTYPE=sys_wwid IDNAME=naa.61c721d06b5fb2002c49fbecd02f9d90 DEVNAME=/dev/sda3 PVID=kRe0EF736LQwZAiGtM67wp8cr4DKKcX2 PART=3 [root@ovnb05 data-center]# multipath -ll 360000970000197800382533030303031 dm-5 EMC,SYMMETRIX size=5.6M features='1 queue_if_no_path' hwhandler='0' wp=ro `-+- policy='service-time 0' prio=1 status=active `- 9:0:25:0 sdj 8:144 active ready running 360002ac000000000000000870002a7fd dm-3 3PARdata,VV size=12T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw `-+- policy='service-time 0' prio=50 status=active |- 9:0:8:1 sdh 8:112 active ready running |- 9:0:0:1 sdb 8:16 active ready running |- 9:0:1:1 sdd 8:48 active ready running |- 9:0:2:1 sdf 8:80 active ready running |- 10:0:7:1 sdq 65:0 active ready running |- 10:0:0:1 sdk 8:160 active ready running |- 10:0:1:1 sdm 8:192 active ready running `- 10:0:2:1 sdo 8:224 active ready running 360002ac000000000000000880002a7fd dm-4 3PARdata,VV size=12T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw `-+- policy='service-time 0' prio=50 status=active |- 9:0:8:2 sdi 8:128 active ready running |- 9:0:0:2 sdc 8:32 active ready running |- 9:0:1:2 sde 8:64 active ready running |- 9:0:2:2 sdg 8:96 active ready running |- 10:0:7:2 sdr 65:16 active ready running |- 10:0:0:2 sdl 8:176 active ready running |- 10:0:1:2 sdn 8:208 active ready running `- 10:0:2:2 sdp 8:240 active ready running 360002ac0000000000000008f0002a7fd dm-26 3PARdata,VV size=12T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw `-+- policy='service-time 0' prio=50 status=active |- 10:0:1:3 sdt 65:48 active ready running |- 10:0:0:3 sds 65:32 active ready running |- 10:0:7:3 sdv 65:80 active ready running |- 10:0:2:3 sdu 65:64 active ready running |- 9:0:1:3 sdx 65:112 active ready running |- 9:0:2:3 sdy 65:128 active ready running |- 9:0:0:3 sdw 65:96 active ready running `- 9:0:8:3 sdz 65:144 active ready running If I forgot something or you need more input just let me know, maybe you can light me up what's wrong thx in advance for any help/suggestions

8 months, 4 weeks

1
0
0 / 0

I need install new host with O.S. Ubuntu 22 could you share to me which steps that I can follow

by oscar.loza＠toshibagcs.com

hi goo day: I need install new host with O.S. Ubuntu 22, could you share to me which steps that I can follow? thanks

8 months, 4 weeks

2
1
0 / 0

ovirt-engine-appliance bad gpg key

by Nathanaël Blanchet

Hello, I tried to reinstall HE from a backup but I can't download ovirt- engine-appliance because of a GPG failure: 2024-02-28 17:26:32,642+0000 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost]: FAILED! => {"attempts": 10, "changed": false, "msg": "Failed to validate GPG signature for ovirt-engine-appliance-4.5-20231201120252.1.el8.x86_64: Public key for ovirt-engine-appliance-4.5- 20231201120252.1.el8.x86_64.rpm is not installed Thank you to help me how to do because there is non -nogpgcheck option as a workaround. -- Nathanaël Blanchet Administrateur Systèmes et Réseaux Service Informatique et REseau (SIRE) Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

8 months, 4 weeks

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users February 2024