On 11/29/2013 03:35 AM, tristano82(a)libero.it wrote: GlusterFS is integrated with oVirt in two ways: 1. Use oVirt to manage gluster storage configuration options. 2. Use GlusterFS as a storage domain. A cluster in oVirt can be configured to behave in 3 ways: (i) virtualization only (ii) Gluster storage only (iii) virtualization + gluster storage You need (ii) or (iii) to provide oVirt with the ability to perform gluster storage configuration and management. You can also configure gluster using its CLI and use (i) or (iii) for a glusterfs storage domain. You can also have two clusters for (i), (ii) and manage both using oVirt. There are two ways in which GlusterFS can be used as a storage domain: a) Use gluster native/fuse access with POSIXFS b) Use the gluster native storage domain to bypass fuse (with libgfapi). We are currently addressing an issue in libvirt (https://bugzilla.redhat.com/show_bug.cgi?id=1017289) to enable snapshot support with libgfapi. Once this is addressed, we will have libgfapi support in the native storage domain. Till then, fuse would be used with native storage domain. You can find more details about native storage domain here: http://www.ovirt.org/Features/GlusterFS_Storage_Domain If you are having separate compute/virtualization and storage clusters, you would not be required to create bricks on your compute nodes. However if you are using a single cluster for both compute and storage (as in iii above), you need not necessarily have bricks on all compute nodes. HTH, Vijay