March 2013 - Users - oVirt List Archives

[Users] otopi needed on oVirt node?
by Gianluca Cecchi 19 Mar '13

19 Mar '13

Hello, comparing rpm packages installed on two f18 systems that are nodes of a 3.2 cluster, I notice this difference: > otopi-1.0.0-1.fc18.noarch > ovirt-host-deploy-1.0.1-1.fc18.noarch I think ovirt-host-deploy is not necessary and that I can remove from the only node where it is installed. What about otopi? Thanks, Gianluca

3 6

Re: [Users] BUG: soft lockup
by suporte＠logicworks.pt 19 Mar '13

19 Mar '13

------=_Part_259_6936283.1363686391577 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Yes the newer kernels does not work.=20 I installed kernel kernel-3.6.11-3.fc18.x86_64.rpm and everything works now= =20 Thanks=20 Jose=20 ----- Mensagem original ----- De: "Joop van de Wege" <jvdwege(a)xs4all.nl>=20 Para: suporte(a)logicworks.pt=20 Enviadas: S=C3=A1bado, 16 de Mar=C3=A7o de 2013 8:06:25=20 Assunto: Re: [Users] BUG: soft lockup=20 suporte(a)logicworks.pt schreef:=20 So, there is not a solid solution for this?=20 ----- Mensagem original -----=20 De: "Joop" <jvdwege(a)xs4all.nl>=20 Para: suporte(a)logicworks.pt, Users(a)ovirt.org=20 Enviadas: Sexta-feira, 15 Mar=C3=A7o, 2013 21:57:35=20 Assunto: Re: [Users] BUG: soft lockup=20 suporte(a)logicworks.pt wrote:=20 I have a host that have this error BUG: soft lockup - CPU#4 stuck for 22s! = [sh: 1534], and the host died=20 this host was installed from fedora18 minimum installation, kernel version = 3.8.2-206.fc18.x86_64. I have another host with the same configuration, and= have no errors, until now.=20 Any idea?=20 Users mailing list=20 Users(a)ovirt.org=20 http://lists.ovirt.org/mailman/listinfo/users=20 Just to let you know you're not alone. I ! have a few hosts which have the same problem. F18 minimal install, started at 3.6.= x kernel. Every upgrade since has had this. Some reboots! at higher version= s work, mostly not. Disabling multipath might help but then vdsm doesn't wo= rk.=20 Hosts are HP ML110G5, HP DL360 G6, from memory=20 Joop=20 Sticking to the 3.6 kernel works each and every time. I still try new kerne= ls once in a while but it seems that anything after it isnt stable.=20 ------=_Part_259_6936283.1363686391577 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: verdana,helvetica,sans-serif; font-size: 10pt; co= lor: #330066'>Yes the newer kernels does not work.<br>I installed  ker= nel <span style=3D"font-size: 16pt; line-height: 115%; font-family:= "Calibri","sans-serif";" lang=3D"EN-US">kernel-3.6.11-= 3.fc18.x86_64.rpm and everything works now<br><br>Thanks<br><br>Jose<br></s= pan><br><hr id=3D"zwchr"><div style=3D"color: rgb(0, 0, 0); font-weight: no= rmal; font-style: normal; text-decoration: none; font-family: Helvetica,Ari= al,sans-serif; font-size: 12pt;"><b>De: </b>"Joop van de Wege" <jvdwege@= xs4all.nl><br><b>Para: </b>suporte(a)logicworks.pt<br><b>Enviadas: </b>S= =C3=A1bado, 16 de Mar=C3=A7o de 2013 8:06:25<br><b>Assunto: </b>Re: [Users]= BUG: soft lockup<br><br><div class=3D"gmail_quote">suporte(a)logicworks.pt s= chreef:<blockquote class=3D"gmail_quote" style=3D"margin: 0pt 0pt 0pt 0.8ex= ; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"> <pre style=3D"white-space: pre-wrap; word-wrap: break-word; font-family: sa= ns-serif; margin-top: 0px;">So, there is not a solid solution for this?<br>= <br>----- Mensagem original -----<br>De: "Joop" <jvdwege(a)xs4all.nl><b= r>Para: suporte(a)logicworks.pt, Users(a)ovirt.org<br>Enviadas: Sexta-feira, 15= Mar=C3=A7o, 2013 21:57:35<br>Assunto: Re: [Users] BUG: soft lockup<br><br>= suporte(a)logicworks.pt wrote: <br><br><br>I have a host that have this error= BUG: soft lockup - CPU#4 stuck for 22s! [sh: 1534], and the host died <br>= <br>this host was installed from fedora18 minimum installation, kernel vers= ion 3.8.2-206.fc18.x86_64. I have another host with the same configuration,= and have no errors, until now. <br><br>Any idea? <br><br><br><br><br><br>U= sers mailing list <br>Users(a)ovirt.org <br><a href=3D"http://lists.ovirt.org= /mailman/listinfo/users" target=3D"_blank">http://lists.ovirt.org/mailman/l= istinfo/users</a> <br><br>Just to let you know you're not alone. I ! have a few hosts which have the same problem. F18 minimal install, started at 3.6.= x kernel. Every upgrade since has had this. Some reboots! at higher version= s work, mostly not. Disabling multipath might help but then vdsm doesn't wo= rk. <br>Hosts are HP ML110G5, HP DL360 G6, from memory <br><br>Joop </pre><= /blockquote></div><br clear=3D"all">Sticking to the 3.6 kernel works each a= nd every time. I still try new kernels once in a while but it seems that an= ything after it isnt stable.<br> </div><br></div></body></html> ------=_Part_259_6936283.1363686391577--

2 2

[Users] Behavior when putting SPM node into mainenance
by Gianluca Cecchi 19 Mar '13

19 Mar '13

Hello 3.2 oVirt cluster based on f18 nodes One node is SPM (f18ovn03) I put the other node (f18ovn01) into maintenance and stop vdsmd and update, so that I take it to 3.2.1 (engine already updated and restarted before) It correctly joins the cluster and I live migrate my 5 VM to it: fedora 18 w7 2 x centos 5.6 slackware 32bit I then put into maintenance the SPM node that doesn't have any VM. I stop vdsmd on it and update packages I see these messages in the gui, because I think the surviving node takes some time to become the SPM now. Apparently no problems at my side. Are these messages expected? Or did I have to make anything before putting the SPM node into maintenance (something like elect the other one as SPM if it exist...)? Any operational test to prove correct SPM role now for f18ovn01 ? Thanks Gianluca 2013-Mar-19, 14:47 Storage Pool Manager runs on Host f18ovn01 (Address: 10.4.4.58). 2013-Mar-19, 14:47 Storage Pool Manager runs on Host f18ovn01 (Address: 10.4.4.58). 2013-Mar-19, 14:47 Invalid status on Data Center Default. Setting status to Non-Responsive. 2013-Mar-19, 14:47 Host f18ovn03 was switched to Maintenance mode by admin@internal.

2 1

Re: [Users] Failed to Start VM (Run Once) due to internal spice channel error
by Omer Frenkel 19 Mar '13

19 Mar '13

------=_Part_21945715_1396613307.1363700583069 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit ----- Original Message ----- > From: "Tom Rogers" <trogers1884(a)gmail.com> > To: "Omer Frenkel" <ofrenkel(a)redhat.com> > Sent: Tuesday, March 19, 2013 3:29:03 PM > Subject: Re: [Users] Failed to Start VM (Run Once) due to internal > spice channel error > Thanks Omer > I'm attaching the vdsm log and the libvirt log. They both pretty much > say the same thing, but from the vdsm.log, it looks like to us that > the data is being pulled from the database ok but is being parsed > incorrectly for spice. > Thanks again. > Tom Rogers well following David's comment, looking at http://gerrit.ovirt.org/#/c/12697 it seems that the name change some how caused this. Ravi, how did you verify this? what is missing? is it a bug in vdsm parsing? > On Tue, Mar 19, 2013 at 3:58 AM, Omer Frenkel < ofrenkel(a)redhat.com > > wrote: > > > From: "Tom Rogers" < trogers1884(a)gmail.com > > > > > > > To: users(a)ovirt.org > > > > > > Sent: Monday, March 18, 2013 10:22:52 PM > > > > > > Subject: [Users] Failed to Start VM (Run Once) due to internal > > > spice > > > channel error > > > > > > When trying to run a first time (Run Once) VM install, the vm > > > session > > > fails to start. When we look into the libvirtd.log on the host, > > > we > > > find the following error: > > > > > > virDomainGraphicsDefParseXML:6566 : internal error unknown spice > > > channel name ain > > > > > > in the lines right above message, contained in the xmlDESC we > > > find > > > the following snippet: > > > > > > <channel type="spicevmc"> > > > > > > <target name="com.redhat.spice.0" type="virtio"/> > > > > > > </channel> > > > > > > <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" > > > passwdValidTo="1970-01-01T00:00:01" port="-1" tlsPort="-1" > > > type="spice"> > > > > > > <channel mode="secure" name="ain"/> > > > > > > <channel mode="secure" name="nputs"/> > > > > > > <channel mode="secure" name="ursor"/> > > > > > > <channel mode="secure" name="layback"/> > > > > > > <channel mode="secure" name="ecord"/> > > > > > > <channel mode="secure" name="isplay"/> > > > > > > <channel mode="secure" name="sbredir"/> > > > > > > <channel mode="secure" name="martcard"/> > > > > > > </graphics> > > > > > > It looks to us that the xml may be malformed due to the seemingly > > > first character missing in the channel names. > > > > > > Does this make any sense to anyone? > > > > > > On master: > > > > > > Ovirt-engine 3.3.0-0.2.master.20130313215708 > > > > > > On node: > > > > > > qemu-kvm 1.2.2-7.fc18 > > > > > > vdsm-xmlrpc 4.10.3-10.fc18 > > > > > > libvirt-daemon 0.10.2.3-1.fc18 > > > > > > ------------------------------------------ > > > > > > Tom Rogers > > > > > > _______________________________________________ > > > > > > Users mailing list > > > > > > Users(a)ovirt.org > > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > indeed looks like first letter is missing, this is what the engine > > sends: > > > engine=# select * from vdc_options where option_name = > > 'SpiceSecureChannels'; > > > option_id | option_name | option_value | version > > > -----------+---------------------+---------------------------------------------------------------+--------- > > > 345 | SpiceSecureChannels | smain,sinputs | 3.0 > > > 346 | SpiceSecureChannels | > > main,inputs,cursor,playback,record,display,usbredir,smartcard | 3.1 > > > 347 | SpiceSecureChannels | > > main,inputs,cursor,playback,record,display,usbredir,smartcard | 3.2 > > > 348 | SpiceSecureChannels | > > main,inputs,cursor,playback,record,display,usbredir,smartcard | 3.3 > > > can you please attach relevant vdsm log for this run? > > > Thanks > > -- > ------------------------------------------ > Tom Rogers ------=_Part_21945715_1396613307.1363700583069 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: times new roman,new york,times,serif; font-size: = 12pt; color: #000000'><br><br><hr id=3D"zwchr"><blockquote style=3D"border-= left:2px solid rgb(16, 16, 255);margin-left:5px;padding-left:5px;color:#000= ;font-weight:normal;font-style:normal;text-decoration:none;font-family:Helv= etica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Tom Rogers" <troge= rs1884(a)gmail.com><br><b>To: </b>"Omer Frenkel" <ofrenkel(a)redhat.com&g= t;<br><b>Sent: </b>Tuesday, March 19, 2013 3:29:03 PM<br><b>Subject: </b>Re= : [Users] Failed to Start VM (Run Once) due to internal spice channel error= <br><br><div dir=3D"ltr"><div><div><div>Thanks Omer<br><br></div>I'm attach= ing the vdsm log and the libvirt log. They both pretty much say the same th= ing, but from the vdsm.log, it looks like to us that the data is being pull= ed from the database ok but is being parsed incorrectly for spice.<br> <br></div>Thanks again.<br></div>Tom Rogers<br></div><div id=3D"DWT2674" cl= ass=3D"gmail_extra"><br></div></blockquote>well following David's comment,<= br>looking at <br>http://gerrit.ovirt.org/#/c/12697<br>it seems that the na= me change some how caused this.<br>Ravi, how did you verify this? what is m= issing?<br>is it a bug in vdsm parsing?<br><blockquote style=3D"border-left= :2px solid rgb(16, 16, 255);margin-left:5px;padding-left:5px;color:#000;fon= t-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetic= a,Arial,sans-serif;font-size:12pt;"><div class=3D"gmail_extra"><br><div cla= ss=3D"gmail_quote">On Tue, Mar 19, 2013 at 3:58 AM, Omer Frenkel <span dir= =3D"ltr"><<a href=3D"mailto:ofrenkel@redhat.com" target=3D"_blank">ofren= kel(a)redhat.com</a>></span> wrote:<br> <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p= x #ccc solid;padding-left:1ex"><div><div style=3D"font-size:12pt;font-famil= y:times new roman,new york,times,serif"><br><br><hr><blockquote style=3D"pa= dding-left:5px;font-size:12pt;font-style:normal;margin-left:5px;font-family= :Helvetica,Arial,sans-serif;text-decoration:none;font-weight:normal;border-= left:2px solid rgb(16,16,255)"> <b>From: </b>"Tom Rogers" <<a href=3D"mailto:trogers1884@gmail.com" targ= et=3D"_blank">trogers1884(a)gmail.com</a>><br><b>To: </b><a href=3D"mailto= :users@ovirt.org" target=3D"_blank">users(a)ovirt.org</a><br><b>Sent: </b>Mon= day, March 18, 2013 10:22:52 PM<br> <b>Subject: </b>[Users] Failed to Start VM (Run Once) due to internal spice= channel        error<div><div clas= s=3D"h5"><br><br><div dir=3D"ltr"><br clear=3D"all">When trying to run a fi= rst time (Run Once) VM install, the vm session fails to start. When we look= into the libvirtd.log on the host, we find the following error:<br> <br>virDomainGraphicsDefParseXML:6566 : internal error unknown spice channe= l name ain<br> <br>in the lines right above message, contained in the xmlDESC we find the = following snippet:<br><br>        &= nbsp;       <channel type=3D"spicevmc">= <br>           &nbsp= ;            <tar= get name=3D"com.redhat.spice.0" type=3D"virtio"/><br>             &nb= sp;   </channel><br>      &nb= sp;         <graphics autoport= =3D"yes" keymap=3D"en-us" listen=3D"0" passwd=3D"*****" passwdValidTo=3D"19= 70-01-01T00:00:01" port=3D"-1" tlsPort=3D"-1" type=3D"spice"><br>             &nb= sp;           <channel= mode=3D"secure" name=3D"ain"/><br>      &= nbsp;           &nbs= p;     <channel mode=3D"secure" name=3D"nputs"/><= br>            =             <chan= nel mode=3D"secure" name=3D"ursor"/><br>             &nb= sp;           <channel= mode=3D"secure" name=3D"layback"/><br>     &nb= sp;            =       <channel mode=3D"secure" name=3D"ecord"/&= gt;<br>           &n= bsp;            <= channel mode=3D"secure" name=3D"isplay"/><br>             &nb= sp;           <channel= mode=3D"secure" name=3D"sbredir"/><br>     &nb= sp;            =       <channel mode=3D"secure" name=3D"martcard= "/><br>          &nbsp= ;     </graphics><br> <br><br><br>It looks to us that the xml may be malformed due to the seeming= ly first character missing in the channel names.<br><br>Does this make any = sense to anyone?<br><br><br>On master:<br>Ovirt-engine   3.3.0-0.= 2.master.20130313215708<br> <br>On node:<br>qemu-kvm 1.2.2-7.fc18<br>vdsm-xmlrpc 4.10.3-10.fc18<br>libv= irt-daemon 0.10.2.3-1.fc18<br><br><br><br>---------------------------------= ---------<br>Tom Rogers<br> </div> <br></div></div>_______________________________________________<br>Users ma= iling list<br><a href=3D"mailto:Users@ovirt.org" target=3D"_blank">Users@ov= irt.org</a><br><a href=3D"http://lists.ovirt.org/mailman/listinfo/users" ta= rget=3D"_blank">http://lists.ovirt.org/mailman/listinfo/users</a><br> </blockquote>indeed looks like first letter is missing, this is what the en= gine sends:<br><br>engine=3D# select * from vdc_options where option_name = =3D 'SpiceSecureChannels';<br> option_id |     opt= ion_name     |      &nbsp= ;            &n= bsp;     option_value     &nbs= p;            &= nbsp;       | version <br> -----------+---------------------+-----------------------------------------= ----------------------+---------<br>       34= 5 | SpiceSecureChannels | smain,sinputs      =             &nb= sp;            =             &nb= sp;     | 3.0<br>       3= 46 | SpiceSecureChannels | main,inputs,cursor,playback,record,display,usbre= dir,smartcard | 3.1<br>        347 | SpiceSecureChannels | main,input= s,cursor,playback,record,display,usbredir,smartcard | 3.2<br>  &n= bsp;    348 | SpiceSecureChannels | main,inputs,cursor,playb= ack,record,display,usbredir,smartcard | 3.3<br><br>can you please attach re= levant vdsm log for this run?<br> Thanks<br></div></div></blockquote></div><br><br clear=3D"all"><br>-- <br><= br>------------------------------------------<br>Tom Rogers<br> </div> </blockquote><br></div></body></html> ------=_Part_21945715_1396613307.1363700583069--

1 0

[Users] Failed to Start VM (Run Once) due to internal spice channel error
by Tom Rogers 19 Mar '13

19 Mar '13

When trying to run a first time (Run Once) VM install, the vm session fails to start. When we look into the libvirtd.log on the host, we find the following error: virDomainGraphicsDefParseXML:6566 : internal error unknown spice channel name ain in the lines right above message, contained in the xmlDESC we find the following snippet: <channel type="spicevmc"> <target name="com.redhat.spice.0" type="virtio"/> </channel> <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" passwdValidTo="1970-01-01T00:00:01" port="-1" tlsPort="-1" type="spice"> <channel mode="secure" name="ain"/> <channel mode="secure" name="nputs"/> <channel mode="secure" name="ursor"/> <channel mode="secure" name="layback"/> <channel mode="secure" name="ecord"/> <channel mode="secure" name="isplay"/> <channel mode="secure" name="sbredir"/> <channel mode="secure" name="martcard"/> </graphics> It looks to us that the xml may be malformed due to the seemingly first character missing in the channel names. Does this make any sense to anyone? On master: Ovirt-engine 3.3.0-0.2.master.20130313215708 On node: qemu-kvm 1.2.2-7.fc18 vdsm-xmlrpc 4.10.3-10.fc18 libvirt-daemon 0.10.2.3-1.fc18 ------------------------------------------ Tom Rogers

3 2

[Users] Where is live block migration?
by nnex 18 Mar '13

18 Mar '13

This is a multi-part message in MIME format. --------------050807000403030104030500 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi all. I'm successfully install a oVirt 3.2(fedora 18 distr). I'm successfuly deploy cluster also with two NFS storage also. But I'm can't "move" block device in VM to 2nd storage? i can't locate "move" button according this http://www.ovirt.org/Features/Design/StorageLiveMigration guide. Please help anyone. --------------050807000403030104030500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi all.<br> I'm successfully install a oVirt 3.2(fedora 18 distr). I'm successfuly deploy cluster also with two NFS storage also. But I'm can't "move" block device in VM to 2nd storage? i can't locate "move" button according this <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <a href="http://www.ovirt.org/Features/Design/StorageLiveMigration">http://www.ovirt.org/Features/Design/StorageLiveMigration</a> guide.<br> Please help anyone.<br> </body> </html> --------------050807000403030104030500--

4 3

[Users] host power managment failures
by Dead Horse 18 Mar '13

18 Mar '13

Current running engine build --> commit: 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8 Host power management is having some issues: 2013-01-28 13:15:49,320 ERROR [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-11) Illegal value in PM Proxy Preferences string , skipped. 2013-01-28 13:15:49,321 ERROR [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-11) Failed to run Power Management command on Host , no running proxy Host was found. - DHC

5 8

[Users] how the default bridge network is created.
by bigclouds 18 Mar '13

18 Mar '13

------=_Part_169797_999199149.1363334372707 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit hi,all vdsmgmt network is created defaultly, i want to know how and where ? i now need to add my own network, better to refer to ovirt'default network. 1.if i need to insert network info into DB 2.how to start up the default network , 1)just put a network xml in right place, let libvirt tak care of it. 2)when start agent or engine, call add network API to product a network dynamicly? 3.in network table, what is column type, how many of this type. thanks. ------=_Part_169797_999199149.1363334372707 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial">hi,all<div>vdsmgmt network is created defaultly, i want to know how and where ?</div><div>i now need to add my own network, better to  refer to ovirt'default network.</div><div><br></div><div>1.if i need to insert network info into DB</div><div>2.how to start up the default network , 1)just put a network xml in right place, let libvirt tak care of it. 2)when start agent or engine, call add network API to product a network dynamicly?</div><div>3.in network  table, what is column type, how many of this type.</div><div><span style="line-height: 1.7;">thanks. </span></div></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_169797_999199149.1363334372707--

2 2

[Users] vfs_type not being sent by engine to VDSM for GLUSTER DOMAIN case
by Deepak C Shetty 18 Mar '13

18 Mar '13

This is a multi-part message in MIME format. --------------030906080804030905060804 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi All, I am validating GLUSTERFS Storage domain engine patches (worked on by Sharad, in Cc) as posted here... http://gerrit.ovirt.org/#/q/status:open+project:ovirt-engine+branch:master+… against VDSM Glusterfs domain support (already upstream in VDSM) I see the below issue as part of me creatign a new Gluster Storage DOmain in the UI Engine logs... 2013-03-18 13:27:29,149 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (http--0.0.0.0-8700-1) [4b751967] START, ConnectStorageServerVDSCommand(HostName = vm-vdsm-de-1, HostId = c0ff5edc-4e30-4553-9125-2d1cee9f19ec, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = GLUSTERFS, connectionList = [{ id: null, connection: vm-vdsm-de-1:dpkvol4, iqn: null, vfsType: glusterfs, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null };]), log id: f88d42d VDSM Logs... Thread-77::INFO::2013-03-18 13:32:35,541::logUtils::44::dispatcher::(wrapper) Run and protect: connectStorageServer(domType=7, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'connection': 'vm-vdsm-de-1:dpkvol4', 'iqn': '', 'portal': '', 'user': '', 'password': '******', 'id': '00000000-0000-0000-0000-000000000000', 'port': ''}], options=None)*--> Notice no vfs_type here !!!* VDSM doesn't recv. the vfs_type in the conList dict !!! I had this small chat with Saggi of VDSM, just to confirm that there isn't a possibility that VDSM might be stripping args that are recd. from Engine.. and it doesn't. --------------------------------------------------------------------------------------------------------------------- <deepakcs> saggi, Hi <saggi> deepakcs: hi <deepakcs> saggi, Is it possible that VDSM might strip down some of the connparams that are recd. as part of connectStorageServer ? <deepakcs> saggi, In engine log for GLUSTERFS_DOMAIN i see vfsType being passed, but connectStorageServer log doesn't show vfs_type in the params dict <deepakcs> saggi, so wodering where vfs_type is getting dropped in this whole process <saggi> Probably not being sent <saggi> if it's not being logged <deepakcs> saggi, engine log has this.... <deepakcs> 2013-03-18 13:27:29,149 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (http--0.0.0.0-8700-1) [4b751967] START, ConnectStorageServerVDSCommand(HostName = vm-vdsm-de-1, HostId = c0ff5edc-4e30-4553-9125-2d1cee9f19ec, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = GLUSTERFS, connectionList = [{ id: null, connection: vm-vdsm-de-1:dpkvol4, iqn: null, vfsType: glusterfs, mountOptions: null, nfsVersion: nul <deepakcs> l, nfsRetrans: null, nfsTimeo: null };]), log id: f88d42d <deepakcs> saggi, on VDSM side i see this... <deepakcs> Thread-77::INFO::2013-03-18 13:32:35,541::logUtils::44::dispatcher::(wrapper) Run and protect: connectStorageServer(domType=7, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'connection': 'vm-vdsm-de-1:dpkvol4', 'iqn': '', 'portal': '', 'user': '', 'password': '******', 'id': '00000000-0000-0000-0000-000000000000', 'port': ''}], options=None) --> Notice no vfs_type here !!! <saggi> Then you are not sending the correct connection type <deepakcs> saggi, 'you' means the engine side of code ? engine patches is being done by Sharad, and I amtrying to work with them on this issue <deepakcs> saggi, domType=7 is GLUSTERFS_DOMAIN, so its correct on that front <saggi> If it show nfsRetrans you are using nfs which doesn't have a vfs_type argument <deepakcs> saggi, but engine log says storageType = GLUSTERFS <deepakcs> saggi, maybe i can send mail to users@ovirt list to see if anybody can provide more clues <deepakcs> saggi, but definitely this doesn't looks like a vdsm side of issue rite ? <saggi> We log the params as we get them <deepakcs> saggi, right, thats what i also see.. just wanted to confirm once with you, before i sent mail to ovirt folks --------------------------------------------------------------------------------------------------------------------- Can someone help provide any clues on what might be the issue here ? Because VDSM doesn't see vfs_type, the connectStorageServer fails and hence new SD cannot be created ! thanx, deepak --------------030906080804030905060804 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <tt>Hi All,<br>     I am validating GLUSTERFS Storage domain engine patches (worked on by Sharad, in Cc) as posted here...<br> <a class="moz-txt-link-freetext" href="http://gerrit.ovirt.org/#/q/status:open+project:ovirt-engine+branch:master+…">http://gerrit.ovirt.org/#/q/status:open+project:ovirt-engine+branch:master+…</a><br> against VDSM Glusterfs domain support (already upstream in VDSM)<br> <br> I see the below issue as part of me creatign a new Gluster Storage DOmain in the UI<br> <br> Engine logs...<br> <br> 2013-03-18 13:27:29,149 INFO  [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (http--0.0.0.0-8700-1) [4b751967] START, ConnectStorageServerVDSCommand(HostName = vm-vdsm-de-1, HostId = c0ff5edc-4e30-4553-9125-2d1cee9f19ec, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = GLUSTERFS, connectionList = [{ id: null, connection: vm-vdsm-de-1:dpkvol4, iqn: null, vfsType: glusterfs, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null };]), log id: f88d42d<br> <br> VDSM Logs...<br> <br> Thread-77::<a class="moz-txt-link-freetext" href="INFO::2013-03-18">INFO::2013-03-18</a> 13:32:35,541::logUtils::44::dispatcher::(wrapper) Run and protect: connectStorageServer(domType=7, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'connection': 'vm-vdsm-de-1:dpkvol4', 'iqn': '', 'portal': '', 'user': '', 'password': '******', 'id': '00000000-0000-0000-0000-000000000000', 'port': ''}], options=None)<b> --> Notice no vfs_type here !!!</b><br> <br> VDSM doesn't recv. the vfs_type in the conList dict !!!<br> <br> I had this small chat with Saggi of VDSM, just to confirm that there isn't a possibility that VDSM might be stripping args that are recd. from Engine.. and it doesn't.<br> <br> </tt><br> <tt><tt>---------------------------------------------------------------------------------------------------------------------<br> </tt><deepakcs> saggi, Hi<br> <saggi> deepakcs: hi<br> <br> <deepakcs> saggi, Is it possible that VDSM might strip down some of the connparams that are recd. as part of connectStorageServer ?<br> <deepakcs> saggi, In engine log for GLUSTERFS_DOMAIN i see vfsType being passed, but connectStorageServer log doesn't show vfs_type in the params dict<br> <deepakcs> saggi, so wodering where vfs_type is getting dropped in this whole process<br> <saggi> Probably not being sent<br> <saggi> if it's not being logged<br> <deepakcs> saggi, engine log has this....<br> <deepakcs> 2013-03-18 13:27:29,149 INFO  [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (http--0.0.0.0-8700-1) [4b751967] START, ConnectStorageServerVDSCommand(HostName = vm-vdsm-de-1, HostId = c0ff5edc-4e30-4553-9125-2d1cee9f19ec, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = GLUSTERFS, connectionList = [{ id: null, connection: vm-vdsm-de-1:dpkvol4, iqn: null, vfsType: glusterfs, mountOptions: null, nfsVersion: nul<br> <deepakcs> l, nfsRetrans: null, nfsTimeo: null };]), log id: f88d42d<br> <deepakcs> saggi,  on VDSM side i see this...<br> <deepakcs> Thread-77::<a class="moz-txt-link-freetext" href="INFO::2013-03-18">INFO::2013-03-18</a> 13:32:35,541::logUtils::44::dispatcher::(wrapper) Run and protect: connectStorageServer(domType=7, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'connection': 'vm-vdsm-de-1:dpkvol4', 'iqn': '', 'portal': '', 'user': '', 'password': '******', 'id': '00000000-0000-0000-0000-000000000000', 'port': ''}], options=None) --> Notice no vfs_type here !!!<br> <saggi> Then you are not sending the correct connection type<br> <br> <deepakcs> saggi, 'you' means the engine side of code ? engine patches is being done by Sharad, and I amtrying to work with them on this issue<br> <br> <deepakcs> saggi, domType=7 is GLUSTERFS_DOMAIN, so its correct on that front<br> <saggi> If it show nfsRetrans you are using nfs which doesn't have a vfs_type argument<br> <deepakcs> saggi, but engine log says storageType = GLUSTERFS<br> <deepakcs> saggi, maybe i can send mail to users@ovirt list to see if anybody can provide more clues<br> <deepakcs> saggi, but definitely this doesn't looks like a vdsm side of issue rite ?<br> <saggi> We log the params as we get them<br> <br> <deepakcs> saggi, right, thats what i also see.. just wanted to confirm once with you, before i sent mail to ovirt folks<br> <br> ---------------------------------------------------------------------------------------------------------------------<br> <br> <br> Can someone help provide any clues on what might be the issue here ?<br> Because VDSM doesn't see vfs_type, the connectStorageServer fails and hence new SD cannot be created !<br> <br> thanx,<br> deepak<br> <br> </tt> </body> </html> --------------030906080804030905060804--

1 0

Re: [Users] BUG: soft lockup
by suporte＠logicworks.pt 18 Mar '13

18 Mar '13

------=_Part_286_33223576.1363605175485 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable I tried kernel 3.8.3-201.fc18.x86_64 and get the same problem.=20 I tried kernel 3.6.11-3.fc18.x86_64, the host activated but the storage dat= a domain and iso domain becomes inactive.=20 I have this errors on engine log:=20 2013-03-18 11:11:15,287 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.Vd= sBrokerCommand] (DefaultQuartzScheduler_Worker-1) [6ccaf399] XML RPC error = in command GlusterVolumesListVDS ( HostName =3D node2.acloud.pt ), the erro= r was: java.util.concurrent.ExecutionException: java.lang.reflect.Invocatio= nTargetException, <type 'exceptions.ValueError'>:I/O operation on closed fi= le=20 2013-03-18 11:11:15,290 ERROR [org.ovirt.engine.core.bll.gluster.GlusterMan= ager] (DefaultQuartzScheduler_Worker-1) [6ccaf399] Error while refreshing G= luster lightweight data of cluster Default!: org.ovirt.engine.core.common.e= rrors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vds= broker.VDSNetworkException: org.apache.xmlrpc.XmlRpcException: <type 'excep= tions.ValueError'>:I/O operation on closed file=20 2013-03-18 11:11:20,360 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.Vd= sBrokerCommand] (DefaultQuartzScheduler_Worker-4) [629f0dd3] XML RPC error = in command GlusterVolumesListVDS ( HostName =3D node2.acloud.pt ), the erro= r was: java.util.concurrent.ExecutionException: java.lang.reflect.Invocatio= nTargetException, <type 'exceptions.ValueError'>:I/O operation on closed fi= le=20 2013-03-18 11:11:20,362 ERROR [org.ovirt.engine.core.bll.gluster.GlusterMan= ager] (DefaultQuartzScheduler_Worker-4) [629f0dd3] Error while refreshing G= luster lightweight data of cluster Default!: org.ovirt.engine.core.common.e= rrors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vds= broker.VDSNetworkException: org.apache.xmlrpc.XmlRpcException: <type 'excep= tions.ValueError'>:I/O operation on closed file=20 ----- Mensagem original ----- De: "Joop van de Wege" <jvdwege(a)xs4all.nl>=20 Para: suporte(a)logicworks.pt=20 Enviadas: S=C3=A1bado, 16 de Mar=C3=A7o de 2013 8:06:25=20 Assunto: Re: [Users] BUG: soft lockup=20 suporte(a)logicworks.pt schreef:=20 So, there is not a solid solution for this?=20 ----- Mensagem original -----=20 De: "Joop" <jvdwege(a)xs4all.nl>=20 Para: suporte(a)logicworks.pt, Users(a)ovirt.org=20 Enviadas: Sexta-feira, 15 Mar=C3=A7o, 2013 21:57:35=20 Assunto: Re: [Users] BUG: soft lockup=20 suporte(a)logicworks.pt wrote:=20 I have a host that have this error BUG: soft lockup - CPU#4 stuck for 22s! = [sh: 1534], and the host died=20 this host was installed from fedora18 minimum installation, kernel version = 3.8.2-206.fc18.x86_64. I have another host with the same configuration, and= have no errors, until now.=20 Any idea?=20 Users mailing list=20 Users(a)ovirt.org=20 http://lists.ovirt.org/mailman/listinfo/users=20 Just to let you know you're not alone. I ! have a few hosts which have the same problem. F18 minimal install, started at 3.6.= x kernel. Every upgrade since has had this. Some reboots! at higher version= s work, mostly not. Disabling multipath might help but then vdsm doesn't wo= rk.=20 Hosts are HP ML110G5, HP DL360 G6, from memory=20 Joop=20 Sticking to the 3.6 kernel works each and every time. I still try new kerne= ls once in a while but it seems that anything after it isnt stable.=20 ------=_Part_286_33223576.1363605175485 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: verdana,helvetica,sans-serif; font-size: 10pt; co= lor: #330066'><br>I tried kernel 3.8.3-201.fc18.x86_64 and get the same pro= blem.<br><br>I tried kernel 3.6.11-3.fc18.x86_64, the host activated but th= e storage data domain and iso domain becomes inactive.<br><br>I have this e= rrors on engine log:<br><br><br>2013-03-18 11:11:15,287 ERROR [org.ovirt.en= gine.core.vdsbroker.vdsbroker.VdsBrokerCommand] (DefaultQuartzScheduler_Wor= ker-1) [6ccaf399] XML RPC error in command GlusterVolumesListVDS ( HostName= =3D node2.acloud.pt ), the error was: java.util.concurrent.ExecutionExcept= ion: java.lang.reflect.InvocationTargetException, <type 'exceptions.Valu= eError'>:I/O operation on closed file<br>2013-03-18 11:11:15,290 ERROR [= org.ovirt.engine.core.bll.gluster.GlusterManager] (DefaultQuartzScheduler_W= orker-1) [6ccaf399] Error while refreshing Gluster lightweight data of clus= ter Default!: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLEx= ception: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org= .apache.xmlrpc.XmlRpcException: <type 'exceptions.ValueError'>:I/O op= eration on closed file<br>2013-03-18 11:11:20,360 ERROR [org.ovirt.engine.c= ore.vdsbroker.vdsbroker.VdsBrokerCommand] (DefaultQuartzScheduler_Worker-4)= [629f0dd3] XML RPC error in command GlusterVolumesListVDS ( HostName =3D n= ode2.acloud.pt ), the error was: java.util.concurrent.ExecutionException: j= ava.lang.reflect.InvocationTargetException, <type 'exceptions.ValueError= '>:I/O operation on closed file<br>2013-03-18 11:11:20,362 ERROR [org.ov= irt.engine.core.bll.gluster.GlusterManager] (DefaultQuartzScheduler_Worker-= 4) [629f0dd3] Error while refreshing Gluster lightweight data of cluster De= fault!: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLExceptio= n: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apach= e.xmlrpc.XmlRpcException: <type 'exceptions.ValueError'>:I/O operatio= n on closed file<br><br><br><br><br><hr id=3D"zwchr"><div style=3D"color: r= gb(0, 0, 0); font-weight: normal; font-style: normal; text-decoration: none= ; font-family: Helvetica,Arial,sans-serif; font-size: 12pt;"><b>De: </b>"Jo= op van de Wege" <jvdwege(a)xs4all.nl><br><b>Para: </b>suporte@logicwork= s.pt<br><b>Enviadas: </b>S=C3=A1bado, 16 de Mar=C3=A7o de 2013 8:06:25<br><= b>Assunto: </b>Re: [Users] BUG: soft lockup<br><br><div class=3D"gmail_quot= e">suporte(a)logicworks.pt schreef:<blockquote class=3D"gmail_quote" style=3D= "margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padd= ing-left: 1ex;"> <pre style=3D"white-space: pre-wrap; word-wrap: break-word; font-family: sa= ns-serif; margin-top: 0px;">So, there is not a solid solution for this?<br>= <br>----- Mensagem original -----<br>De: "Joop" <jvdwege(a)xs4all.nl><b= r>Para: suporte(a)logicworks.pt, Users(a)ovirt.org<br>Enviadas: Sexta-feira, 15= Mar=C3=A7o, 2013 21:57:35<br>Assunto: Re: [Users] BUG: soft lockup<br><br>= suporte(a)logicworks.pt wrote: <br><br><br>I have a host that have this error= BUG: soft lockup - CPU#4 stuck for 22s! [sh: 1534], and the host died <br>= <br>this host was installed from fedora18 minimum installation, kernel vers= ion 3.8.2-206.fc18.x86_64. I have another host with the same configuration,= and have no errors, until now. <br><br>Any idea? <br><br><br><br><br><br>U= sers mailing list <br>Users(a)ovirt.org <br><a href=3D"http://lists.ovirt.org= /mailman/listinfo/users" target=3D"_blank">http://lists.ovirt.org/mailman/l= istinfo/users</a> <br><br>Just to let you know you're not alone. I ! have a few hosts which have the same problem. F18 minimal install, started at 3.6.= x kernel. Every upgrade since has had this. Some reboots! at higher version= s work, mostly not. Disabling multipath might help but then vdsm doesn't wo= rk. <br>Hosts are HP ML110G5, HP DL360 G6, from memory <br><br>Joop </pre><= /blockquote></div><br clear=3D"all">Sticking to the 3.6 kernel works each a= nd every time. I still try new kernels once in a while but it seems that an= ything after it isnt stable.<br> </div><br></div></body></html> ------=_Part_286_33223576.1363605175485--

1 0