Network Address Change
by Paul.LKW
Hi All:
I just has a case, I need to change the oVirt host and engine IP address
due to data center decommission I checked in the hosted-engine host
there are some files I could change ;
in ovirt-hosted-engine/hosted-engine.conf
ca_subject="O=simple.com, CN=1.2.3.4"
gateway=1.2.3.254
and of course I need to change the ovirtmgmt interface IP too, I think
just change the above line could do the tick, but where could I change
the other host IP in the cluster ?
I think I have to be lost all the host as once changed the hosted-engine
host IP as it is in diff. sub net.
Does there any command line tools could do that or someone has such
experience could share?
Best Regards,
Paul.LKW
2 years, 4 months
OVS switch type for hosted-engine
by Devin A. Bougie
Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated.
Many thanks,
Devin
2 years, 11 months
OVN routing and firewalling in oVirt
by Gianluca Cecchi
Hello,
how do we manage routing between different OVN networks in oVirt?
And between OVN networks and physical ones?
Based on architecture read here:
http://openvswitch.org/support/dist-docs/ovn-architecture.7.html
I see terms for logical routers and gateway routers respectively but how to
apply to oVirt configuration?
Do I have to choose between setting up a specialized VM or a physical one:
is it applicable/advisable to put on oVirt host itself the gateway
functionality?
Is there any security policy (like security groups in Openstack) to
implement?
Thanks,
Gianluca
3 years
Vm suddenly paused with error "vm has paused due to unknown storage error"
by Jasper Siero
Hi all,
Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month.
The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems.
The vm runs without problems after unpausing it.
Versions:
CentOS Linux release 7.1.1503
vdsm-4.14.17-0
libvirt-daemon-1.2.8-16
vdsm.log:
VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78.
libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother
libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None
libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother
...........
libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother
specific error part in libvirt vm log:
block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758)
...........
block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758)
engine.log:
2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from
Up --> Paused
2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error.
Has anyone experienced the same problem or knows a way to solve this?
Kind regards,
Jasper
5 years, 2 months
Unable to find OVF_STORE after recovery / upgrade
by Sam Cappello
This is a multi-part message in MIME format.
--------------05F3D0780062C6D37C1619A7
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
so i was running a 3.4 hosted engine two node setup on centos 6, had
some disk issues so i tried to upgrade to centos 7 and follow the path
3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and
4.0, so i wiped the drives, installed a fresh 4.0.3, then created the
database and restored the 3.6 engine backup before running engine-setup
as per the docs. things seemed to work, but i have the the following
issues / symptoms:
- ovirt-ha-agent running 100% CPU on both nodes
- messages in the UI that the Hosted Engine storage Domain isn't active
and Failed to import the Hosted Engine Storage Domain
- hosted engine is not visible in the UI
and the following repeating in the agent.log:
MainThread::INFO::2016-10-03
12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUp (score: 3400)
MainThread::INFO::2016-10-03
12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host vmhost1.oracool.net (id: 1, score: 3400)
MainThread::INFO::2016-10-03
12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume)
Engine vm running on localhost
MainThread::INFO::2016-10-03
12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm)
Initializing VDSM
MainThread::INFO::2016-10-03
12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Connecting the storage
MainThread::INFO::2016-10-03
12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server
MainThread::INFO::2016-10-03
12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server
MainThread::INFO::2016-10-03
12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Refreshing the storage domain
MainThread::INFO::2016-10-03
12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Preparing images
MainThread::INFO::2016-10-03
12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images)
Preparing images
MainThread::INFO::2016-10-03
12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Reloading vm.conf from the shared storage domain
MainThread::INFO::2016-10-03
12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Trying to get a fresher copy of vm configuration from the OVF_STORE
MainThread::WARNING::2016-10-03
12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan)
Unable to find OVF_STORE
MainThread::ERROR::2016-10-03
12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf
I have searched a bit and not really found a solution, and have come to
the conclusion that i have made a mess of things, and am wondering if
the best solution is to export the VMs, and reinstall everything then
import them back?
i am using remote NFS storage.
if i try and add the hosted engine storage domain it says it is already
registered.
i have also upgraded and am now running oVirt Engine Version:
4.0.4.4-1.el7.centos
hosts were installed using ovirt-node. currently at
3.10.0-327.28.3.el7.x86_64
if a fresh install is best, any advice / pointer to doc that explains
best way to do this?
i have not moved my most important server over to this cluster yet so i
can take some downtime to reinstall.
thanks!
sam
--------------05F3D0780062C6D37C1619A7
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hi,<br>
so i was running a 3.4 hosted engine two node setup on centos 6, had
some disk issues so i tried to upgrade to centos 7 and follow the
path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time
somewhere between 3.6 and 4.0, so i wiped the drives, installed a
fresh 4.0.3, then created the database and restored the 3.6 engine
backup before running engine-setup as per the docs. things seemed
to work, but i have the the following issues / symptoms:<br>
- ovirt-ha-agent running 100% CPU on both nodes<br>
- messages in the UI that the Hosted Engine storage Domain isn't
active and Failed to import the Hosted Engine Storage Domain<br>
- hosted engine is not visible in the UI<br>
and the following repeating in the agent.log:<br>
<br>
MainThread::INFO::2016-10-03
12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUp (score: 3400)<br>
MainThread::INFO::2016-10-03
12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host vmhost1.oracool.net (id: 1, score: 3400)<br>
MainThread::INFO::2016-10-03
12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume)
Engine vm running on localhost<br>
MainThread::INFO::2016-10-03
12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm)
Initializing VDSM<br>
MainThread::INFO::2016-10-03
12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Connecting the storage<br>
MainThread::INFO::2016-10-03
12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server<br>
MainThread::INFO::2016-10-03
12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server<br>
MainThread::INFO::2016-10-03
12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Refreshing the storage domain<br>
MainThread::INFO::2016-10-03
12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Preparing images<br>
MainThread::INFO::2016-10-03
12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images)
Preparing images<br>
MainThread::INFO::2016-10-03
12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Reloading vm.conf from the shared storage domain<br>
MainThread::INFO::2016-10-03
12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Trying to get a fresher copy of vm configuration from the OVF_STORE<br>
MainThread::WARNING::2016-10-03
12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan)
Unable to find OVF_STORE<br>
MainThread::ERROR::2016-10-03
12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Unable to get vm.conf from OVF_STORE, falling back to initial
vm.conf<br>
<br>
I have searched a bit and not really found a solution, and have come
to the conclusion that i have made a mess of things, and am
wondering if the best solution is to export the VMs, and reinstall
everything then import them back?<br>
i am using remote NFS storage.<br>
if i try and add the hosted engine storage domain it says it is
already registered.<br>
i have also upgraded and am now running <span
class="gwt-InlineLabel">oVirt Engine Version: 4.0.4.4-1.el7.centos<br>
hosts were installed using ovirt-node. currently at
3.10.0-327.28.3.el7.x86_64<br>
if a fresh install is best, any advice / pointer to doc that
explains best way to do this?<br>
i have not moved my most important server over to this cluster yet
so i can take some downtime to reinstall.<br>
thanks!<br>
sam<br>
<br>
</span><br>
</body>
</html>
--------------05F3D0780062C6D37C1619A7--
5 years, 11 months
[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP
--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=windows-1252
I can't agree with you more. Modifying every box's or Virtual Machine's =
HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. =
There are several reasons I've come to believe could be the problem =
during my trial-and-errors testing and learning.
FIRST - MACHINE IPs.
THe machine's "Names" where not appearing in the Microsoft Active =
Directory DHCP along with their assigned IPs; in other words, the DHCP =
just showed an "Assigned IP", equal to the Linux Machine's IP, with a =
<empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") =
"Name" in the "Name" (i.e. machines "network name", or FQDN-value used =
by the Windows AD DNS-service) column. =20
if your IP is is appearing with an <empty> "name", there is no "host =
name" to associate the IP, it makes it difficult to define a FQDN; which =
isn't that useful if we're going to use the HOSTS files in all =
participating machines in an oVirt Installation.
I kept banging my head for three (3) long hours trying to find the =
problem.
In Fedora 18, I could't find where the "network name" of the machine =
could be defined. =20
I tried putting the "Additional Search Domains" and/or "DHCP Client ID" =
in Fedora's 18 Desktop - under "System Settings > Hardware > Network > =
Options > IPv4 Setting"
The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really =
long-sting value where the machine's MAC address should be), and we knew =
the MAC address as we obtained using "ifconfig" on the machine getting =
it's IP from the DHCP. So we reverted these entries from the =
aforementioned, rebooted, and got an assigned IP, with proper MAC =
address, but still no "Name"
Kept wondering around the "Settings" and seeing which one made sense, =
but what the heck, I went for it. =20
Under "System Settings > System > Details" I found the information about =
GNOME and the machine's hardware. =20
There was a field for "Device Name" that originally had =
"localhost.localdomain"; I changed the value to "ovirtmanager". and =
under "Graphic" changed to "Forced Fallback Mode" to "ON". =20
I also installed all Kerberos libraries and client (i.e. authconfig-gtk, =
authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, =
krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted
VOILA=85!!! =20
I don;t know if it was the definition of "Device Name" from =
"localhost.localdomain" to "ovirtengine", of the Kerberos libraries =
install, or both. But finally the MS AD DHCP was showing the =
Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, =
setting the machine's "Network Name" under "System Settings > System > =
Details > Device Name", with no explanation of what "Device Name" meant =
or was used for, was the last place I would have imagined this network =
setting could be defined.
NOTE - Somebody has to try the two steps I did together, separately. to =
see which one is the real problem-solver; for me it is working, and "if =
it ain't broke, don't fix it=85"
Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff.
To this point, I've addressed the DHCP and "Network Name" of the =
IP-Lease (required for the DNS to work). This still does't completely =
explain why, by modifying the HOSTS file (allowing be to set and IP and =
non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not =
use default HTTPd service parameters as suggested by the install". By =
using the HOST file to "define" FQDNs, AND NOT using the default HTTPd =
suggested changes, I'm able to install the oVirtEngine (given that I use =
ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT =
NONE of the "oVirt Portals" work=85 YET=85!!!
More to come during the week
Richie
Jos=E9 E ("Richie") Piovanetti, MD, MS=20
M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com
On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote:
> Hello Ritchie,
>=20
>> In a conversation via IRC, someone suggested that I activate =
"dnsmask" to overcome what appears to be a DNS problem. I'll try that =
other possibility once I get home later today.
>>=20
>> In the mean time, what do you mean by "fixing the hostname"=85? I =
opened and fixed the HOSTNAMES and changed it from =
"localhost-localdomain" to "localhost.localdomain" and that made no =
difference. Albeit, after changing I didm;t restart, remove ovirtEngine =
((using "engine-cleanup") and reinstalled via "engine-setup". Is that =
what you mean=85?
>>=20
>>=20
>>=20
>> In the mean time, the fact that even if I resolve the issue of =
oVirtEngine I will not be able to connect to the oVirt Nodes unless I =
have DNS resolution, apparently means I should do something with =
resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" =
so I can resolve my home computers via DNS inside my LAN).
>>=20
>> Any suggestions are MORE THAN WELCOME=85!!!
>> =20
>=20
> Having setup ovirt more than I can count right now I share your =
feeling that it isn't always clear why things are going wrong, but in =
this case I suspect that there is a rather small thing missing.
> In short if you setup ovirt-engine, either using virtualbox or on real =
hardware, and you give your host a meaningfull name AND you add that =
info also in your /etc/hosts file than things SHOULD work, no need for =
dnsmasq or even bind. Would make things easier once you start adding =
virt hosts to you infrastructure since you will need to duplicate these =
actions on each host (add engine name/ip to each host and add each host =
to the others and all hosts to engine)
>=20
> Just ask if you need more assistance and I will write down a small =
howto that should work out of the box else I might have some time to see =
if I can get things going.
>=20
> Regards,
>=20
> Joop
>=20
--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=windows-1252
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html =
charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I =
can't agree with you more. Modifying every box's or Virtual =
Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it =
is not. There are several reasons I've come to believe could be =
the problem during my trial-and-errors testing and =
learning.<div><div><br></div><div>FIRST - MACHINE IPs.</div><ul =
class=3D"MailOutline"><li>THe machine's "Names" where not appearing in =
the <b>Microsoft Active Directory DHCP</b> along with their assigned =
IPs; in other words, the DHCP just showed an "Assigned IP", equal to the =
Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan =
old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines =
"network name", or FQDN-value used by the Windows AD DNS-service) =
column. </li><li>if your IP is is appearing with an <empty> =
"name", there is no "host name" to associate the IP, it makes it =
difficult to define a FQDN; which isn't that useful if we're going to =
use the HOSTS files in all participating machines in an oVirt =
Installation.</li><li>I kept banging my head for three (3) long hours =
trying to find the problem.</li><ul><li>In Fedora 18, I could't find =
where the "network name" of the machine could be defined. =
</li><li>I tried putting the "Additional Search Domains" and/or =
"DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > =
Hardware > Network > Options > IPv4 Setting"</li><ul><li>The =
DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really =
long-sting value where the machine's MAC address should be), and we knew =
the MAC address as we obtained using "ifconfig" on the machine getting =
it's IP from the DHCP. So we reverted these entries from the =
aforementioned, rebooted, and got an assigned IP, with proper MAC =
address, but still no "Name"</li></ul><li>Kept wondering around the =
"Settings" and seeing which one made sense, but what the heck, I went =
for it. </li><ul><li>Under "System Settings > System > =
Details" I found the information about GNOME and the machine's hardware. =
</li><li>There was a field for "Device Name" that originally had =
"localhost.localdomain"; I changed the value to "ovirtmanager". and =
under "Graphic" changed to "Forced Fallback Mode" to "ON". =
</li><li>I also installed all Kerberos libraries and client (i.e. =
authconfig-gtk, authhub, authhub-client, krb5-apple-clents, =
krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) =
and rebooted</li><li>VOILA=85!!! </li></ul><li>I don;t know if it =
was the definition of "Device Name" from "localhost.localdomain" to =
"ovirtengine", of the Kerberos libraries install, or both. But =
finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" =
and the proper MAC-address. Regardless, setting the machine's =
"Network Name" under "System Settings > System > Details =
> Device Name", with no explanation of what "Device Name" meant =
or was used for, was the last place I would have imagined this =
network setting could be defined.</li><li><b>NOTE</b> - Somebody has to =
try the two steps I did together, separately. to see which one is the =
real problem-solver; for me it is working, and "if it ain't broke, don't =
fix it=85"</li></ul></ul><div><br =
class=3D"webkit-block-placeholder"></div><div>Now that I have the DHCP / =
IP thing sorted, I have to do the DNS stuff.</div><div><br></div><div>To =
this point, I've addressed the DHCP and "Network Name" of the IP-Lease =
(required for the DNS to work). This still does't completely =
explain why, by modifying the HOSTS file (allowing be to set and IP and =
non-DNS FQDN). allows me to install the oVirtEngine "<b><i>as long as I =
do not use default HTTPd service parameters as suggested by the =
install</i></b>". <b>By using the HOST file to "define" FQDNs, AND =
NOT using the default HTTPd suggested changes, I'm able to install the =
oVirtEngine (given that I use ports 8700 and 8701) to access the =
"oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work</b>=85 =
YET=85!!!</div><div><br></div><div>More to come during the =
week</div><div><br></div><div>Richie</div><div =
apple-content-edited=3D"true"><br>Jos=E9 E ("Richie") Piovanetti, MD, =
MS <br>M: 787-615-4884 | <a =
href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet=
ti(a)healthcareinfopartners.com</a><br><br><br><br><br><br></div><br><div><d=
iv>On Aug 2, 2013, at 3:10 AM, Joop <<a =
href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> =
wrote:</div><br class=3D"Apple-interchange-newline"><blockquote =
type=3D"cite">Hello Ritchie,<br><br><blockquote type=3D"cite">In a =
conversation via IRC, someone suggested that I activate "dnsmask" to =
overcome what appears to be a DNS problem. I'll try that other =
possibility once I get home later today.<br><br>In the mean time, what =
do you mean by "fixing the hostname"=85? I opened and fixed the =
HOSTNAMES and changed it from "localhost-localdomain" to =
"localhost.localdomain" and that made no difference. Albeit, after =
changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") =
and reinstalled via "engine-setup". Is that what you =
mean=85?<br><br><br><br>In the mean time, the fact that even if I =
resolve the issue of oVirtEngine I will not be able to connect to the =
oVirt Nodes unless I have DNS resolution, apparently means I should do =
something with resolving via DNS in my home LAN (i.e implement some sort =
of "DNS Cache" so I can resolve my home computers via DNS inside my =
LAN).<br><br>Any suggestions are MORE THAN WELCOME=85!!!<br> =
<br></blockquote><br>Having setup ovirt more than I can count =
right now I share your feeling that it isn't always clear why things are =
going wrong, but in this case I suspect that there is a rather small =
thing missing.<br>In short if you setup ovirt-engine, either using =
virtualbox or on real hardware, and you give your host a meaningfull =
name AND you add that info also in your /etc/hosts file than things =
SHOULD work, no need for dnsmasq or even bind. Would make things easier =
once you start adding virt hosts to you infrastructure since you will =
need to duplicate these actions on each host (add engine name/ip to each =
host and add each host to the others and all hosts to =
engine)<br><br>Just ask if you need more assistance and I will write =
down a small howto that should work out of the box else I might have =
some time to see if I can get things =
going.<br><br>Regards,<br><br>Joop<br><br></blockquote></div><br></div></b=
ody></html>=
--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--
5 years, 11 months
Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak
------=_Part_1975902_834617789.1445161505459
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Hi=C2=A0Salifou,
Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna=
ls so developers could stay in java domain,if your headers are static, easi=
est way would be using reverse proxy in a middle to intercept requests,=C2=
=A0
can you tell me why do you need this?
=20
On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@=
redhat.com> wrote:
=20
Hi Micheal,
I have a question about the ovirt-engine-sdk-java.
Is there a way to add custom request headers to each RHEVM API call?
Here is an example of a request that I would like to do:
$ curl -v -k \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts
I would like to add ID, PASSWORD and TARGET as HTTP request header.=20
Thanks,
Salifou
------=_Part_1975902_834617789.1445161505459
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<html><head></head><body><div style=3D"color:#000; background-color:#fff; f=
ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve=
tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_=
0_1_1445160422533_3555" dir=3D"ltr"><span id=3D"yui_3_16_0_1_1445160422533_=
4552">Hi </span><span style=3D"font-family: 'Helvetica Neue', 'Segoe U=
I', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16_0_1_1445=
160422533_3568" class=3D"">Salifou,</span></div><div id=3D"yui_3_16_0_1_144=
5160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica Neue', =
'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br>=
</span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span =
style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Luci=
da Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445160422533_3595">=
Actually java sdk is </span><span style=3D"font-family: 'Helvetica Neu=
e', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3=
_16_0_1_1445160422533_4360" class=3D"">intentionally </span><span styl=
e=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida G=
rande', sans-serif;" id=3D"yui_3_16_0_1_1445160422533_4362" class=3D"">hidi=
ng transport level internals so developers could stay in java domain,</span=
></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span class=
=3D"" id=3D"yui_3_16_0_1_1445160422533_4435"><font face=3D"Helvetica Neue, =
Segoe UI, Helvetica, Arial, Lucida Grande, sans-serif" id=3D"yui_3_16_0_1_1=
445160422533_4432" class=3D"">if your headers are static, easiest way would=
be using reverse proxy in a middle to intercept requests, </font><br>=
</span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span =
class=3D""><font face=3D"Helvetica Neue, Segoe UI, Helvetica, Arial, Lucida=
Grande, sans-serif" class=3D""><br></font></span></div><div id=3D"yui_3_16=
_0_1_1445160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica=
Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"y=
ui_3_16_0_1_1445160422533_4357">can you tell me why do you need this?</span=
><br></div> <br><div class=3D"qtdSeparateBR"><br><br></div><div class=3D"y=
ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic=
aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida=
Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic=
aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si=
ze: 16px;"> <div dir=3D"ltr"> <font size=3D"2" face=3D"Arial"> On Friday, O=
ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>=
wrote:<br> </font> </div> <br><br> <div class=3D"y_msg_container">Hi Mich=
eal,<br><br>I have a question about the ovirt-engine-sdk-java.<br><br>Is th=
ere a way to add custom request headers to each RHEVM API call?<br><br>Here=
is an example of a request that I would like to do:<br><br>$ curl -v -k \<=
br> -H "ID: <a ymailto=3D"mailto:user1@ad=
.xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br> =
; -H "PASSWORD: Pwssd" \<br>  =
; -H "TARGET: kobe" \<br> <=
a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.=
smalick.com/api/hosts</a><br><br><br>I would like to add ID, PASSWORD and T=
ARGET as HTTP request header. <br><br>Thanks,<br>Salifou<br><br><br><br></d=
iv> </div> </div> </div></div></body></html>
------=_Part_1975902_834617789.1445161505459--
5 years, 11 months
[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns
Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html
Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt
Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html
=========================
#ovirt: oVirt Weekly Sync
=========================
Meeting started by mburns at 14:00:23 UTC. The full logs are available
at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html
.
Meeting summary
---------------
* agenda and roll call (mburns, 14:00:41)
* Status of next release (mburns, 14:05:17)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns,
14:05:29)
* AGREED: freeze date and beta release delayed by 1 week to 2012-06-07
(mburns, 14:12:33)
* post freeze, release notes flag needs to be used where required
(mburns, 14:14:21)
* https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker
for 3.1 (oschreib, 14:17:27)
* ACTION: dougsland to fix upstream vdsm right now, and open a bug on
libvirt augeas (oschreib, 14:21:44)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns,
14:23:39)
* assignee not available, update to come tomorrow (mburns, 14:24:59)
* ACTION: oschreib to make sure BZ#822158 is handled quickly
(oschreib, 14:25:29)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns,
14:28:55)
* 824397 expected to be merged prior next week's meeting (mburns,
14:29:45)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns,
14:30:15)
* tracker for node based on F17 (mburns, 14:30:28)
* blocked by util-linux bug currently (mburns, 14:30:40)
* new build expected from util-linux maintainer in next couple days
(mburns, 14:30:55)
* sub-project status -- engine (mburns, 14:32:49)
* nothing to report outside of blockers discussed above (mburns,
14:34:00)
* sub-project status -- vdsm (mburns, 14:34:09)
* nothing outside of blockers above (mburns, 14:35:36)
* sub-project status -- node (mburns, 14:35:43)
* working on f17 migration, but blocked by util-linux bug (mburns,
14:35:58)
* should be ready for freeze deadline (mburns, 14:36:23)
* Review decision on Java 7 and Fedora jboss rpms in oVirt Engine
(mburns, 14:36:43)
* Java7 basically working (mburns, 14:37:19)
* LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35)
* engine will make ack/nack statement next week (mburns, 14:39:49)
* fedora jboss rpms patch is in review, short tests passed (mburns,
14:40:04)
* engine ack on fedora jboss rpms and java7 needed next week (mburns,
14:44:47)
* Upcoming Workshops (mburns, 14:45:11)
* NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16)
* already at half capacity for Workshop at LinuxCon Japan (mburns,
14:47:37)
* please continue to promote it (mburns, 14:48:19)
* proposal: board meeting to be held at all major workshops (mburns,
14:48:43)
* LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns,
14:49:30)
* Open Discussion (mburns, 14:50:12)
* oVirt/Quantum integration discussion will be held separately
(mburns, 14:50:43)
Meeting ended at 14:52:47 UTC.
Action Items
------------
* dougsland to fix upstream vdsm right now, and open a bug on libvirt
augeas
* oschreib to make sure BZ#822158 is handled quickly
Action Items, by person
-----------------------
* dougsland
* dougsland to fix upstream vdsm right now, and open a bug on libvirt
augeas
* oschreib
* oschreib to make sure BZ#822158 is handled quickly
* **UNASSIGNED**
* (none)
People Present (lines said)
---------------------------
* mburns (98)
* oschreib (55)
* doronf (12)
* lh (11)
* sgordon (8)
* dougsland (8)
* ovirtbot (6)
* ofrenkel (4)
* cestila (2)
* RobertMdroid (2)
* ydary (2)
* rickyh (1)
* yzaslavs (1)
* cctrieloff (1)
* mestery_ (1)
* dustins (1)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
5 years, 11 months
[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola
Hi,
We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed.
The bug tracker [1] shows 1 open blocker:
Bug ID Whiteboard Status Summary
1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile
In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC.
- ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA.
Maintainers:
- Please be sure that 3.5 snapshot allow to create VMs
- Please be sure that no pending patches are going to block the release
- If any patch must block the RC release please raise the issue as soon as possible.
There are still 57 bugs [2] targeted to 3.5.1.
Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1.
Maintainers / Assignee:
- Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed.
- ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1:
it will ease gathering the blocking bugs for next releases.
- ACTION: Please fill release notes, the page has been created here [4]
Community:
- If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5]
[1] http://bugzilla.redhat.com/1155170
[2] http://goo.gl/7G0PDV
[3] http://goo.gl/6gUbVr
[4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes
[5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
5 years, 11 months
VM has paused due to no storage space error
by Sandvik Agustin
Hi users,
I have this problem that sometimes 1 to 3 VM just automatically paused with
user interaction and getting this error "VM has paused due to no storage
space error". any inputs from you guys are very appreciated.
TIA
Sandvik
5 years, 11 months
VM Import from remote libvirt Server on web gui with Host key verification failed or permission denied error
by Rogério Ceni Coelho
Hi Ovirt Jedi´s !!!
First of all, congratulations for this amazing product. I am an Vmware and
Hyper-V Engineer but i am very excited with oVirt.
Now, let´s go to work ... :-)
I am trying to Import vm from remote libvirt server on web gui but i was
unable to solve the problem until now.
[image: pasted1]
Node logs :
[root@hlg-rbs-ovirt-kvm01-poa ~]# tail -f /var/log/vdsm/vdsm.log | grep -i
error | grep -v Host.getStats
jsonrpc.Executor/0::ERROR::2016-10-06
10:24:52,432::v2v::151::root::(get_external_vms) error connection to
hypervisor: 'Cannot recv data: Permission denied, please try
again.\r\nPermission denied, please try again.\r\nPermission denied
(publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by
peer'
jsonrpc.Executor/0::INFO::2016-10-06
10:24:52,433::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC
call Host.getExternalVMs failed (error 65) in 10.05 seconds
[root@hlg-rbs-ovirt-kvm02-poa ~]# grep error /var/log/vdsm/vdsm.log | grep
get_external_vms
jsonrpc.Executor/7::ERROR::2016-10-06
10:25:37,344::v2v::151::root::(get_external_vms) error connection to
hypervisor: 'Cannot recv data: Host key verification failed.: Connection
reset by peer'
[root@hlg-rbs-ovirt-kvm02-poa ~]#
Engine Logs :
[root@hlg-rbs-ovirt01-poa ~]# tail -f /var/log/ovirt-engine/engine.log
2016-10-06 10:24:42,377 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] START, GetVmsFromExternalProviderVDSCommand(HostName =
hlg-rbs-ovirt-kvm01-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'}), log id: eb750c7
*2016-10-06 10:24:53,435 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.*
*Permission denied, please try again.*
*Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]*
2016-10-06 10:24:53,435 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Failed in 'GetVmsFromExternalProviderVDS' method
2016-10-06 10:24:53,435 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]
2016-10-06 10:24:53,454 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-97) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VDSM hlg-rbs-ovirt-kvm01-poa.rbs.com.br command failed:
Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer
2016-10-06 10:24:53,454 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Command
'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand'
return value
'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@6c6f696c'
2016-10-06 10:24:53,454 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br
2016-10-06 10:24:53,454 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName
= hlg-rbs-ovirt-kvm01-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'})' execution failed: VDSGenericException:
VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot
recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65
2016-10-06 10:24:53,454 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id:
eb750c7
2016-10-06 10:24:53,459 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-97) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: Failed to retrieve VMs information from external server
qemu+ssh://root@prd-openshift-kvm03-poa.rbs.com.br/system
2016-10-06 10:24:53,459 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-97) [] Query 'GetVmsFromExternalProviderQuery' failed:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
2016-10-06 10:24:53,460 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-97) [] Exception: org.ovirt.engine.core.common.errors.EngineException:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
at
org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114)
[bll.jar:]
at
org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103)
[bll.jar:]
at
org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33)
[dal.jar:]
at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558)
[bll.jar:]
at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73)
[weld-core-impl-2.3.2.Final.jar:2.3.2.Final]
at
org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45)
[wildfly-ee-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636)
at
org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195)
at
org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73)
at
org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown
Source) [common.jar:]
at
org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53)
at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196)
at
com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172)
at
com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233)
at
com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129)
at
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132)
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73)
[branding.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84)
at
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62)
at
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36)
at
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131)
at
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51)
at
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46)
at
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64)
at
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56)
at
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60)
at
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77)
at
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50)
at
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284)
at
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263)
at
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81)
at
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174)
at
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202)
at
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
[rt.jar:1.8.0_102]
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
[rt.jar:1.8.0_102]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102]
2016-10-06 10:25:27,202 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] START, GetVmsFromExternalProviderVDSCommand(HostName
= hlg-rbs-ovirt-kvm02-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'}), log id: 4f3174a6
*2016-10-06 10:25:38,338 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Host key verification failed.: Connection reset
by peer]*
2016-10-06 10:25:38,338 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Failed in 'GetVmsFromExternalProviderVDS' method
2016-10-06 10:25:38,338 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Host key verification failed.: Connection reset
by peer]
2016-10-06 10:25:38,343 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-113) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VDSM hlg-rbs-ovirt-kvm02-poa.rbs.com.br command failed:
Cannot recv data: Host key verification failed.: Connection reset by peer
2016-10-06 10:25:38,343 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Command
'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand'
return value
'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@42dd60af'
2016-10-06 10:25:38,343 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br
2016-10-06 10:25:38,343 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Command
'GetVmsFromExternalProviderVDSCommand(HostName =
hlg-rbs-ovirt-kvm02-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'})' execution failed: VDSGenericException:
VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot
recv data: Host key verification failed.: Connection reset by peer, code =
65
2016-10-06 10:25:38,343 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id:
4f3174a6
2016-10-06 10:25:38,344 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-113) [] Query 'GetVmsFromExternalProviderQuery' failed:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key
verification failed.: Connection reset by peer, code = 65 (Failed with
error unexpected and code 16)
2016-10-06 10:25:38,345 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-113) [] Exception:
org.ovirt.engine.core.common.errors.EngineException: EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key
verification failed.: Connection reset by peer, code = 65 (Failed with
error unexpected and code 16)
at
org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114)
[bll.jar:]
at
org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103)
[bll.jar:]
at
org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33)
[dal.jar:]
at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558)
[bll.jar:]
at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73)
[weld-core-impl-2.3.2.Final.jar:2.3.2.Final]
at
org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45)
[wildfly-ee-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636)
at
org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195)
at
org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73)
at
org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown
Source) [common.jar:]
at
org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53)
at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196)
at
com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172)
at
com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233)
at
com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129)
at
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132)
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73)
[branding.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84)
at
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62)
at
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36)
at
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131)
at
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51)
at
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46)
at
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64)
at
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56)
at
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60)
at
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77)
at
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50)
at
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284)
at
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263)
at
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81)
at
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174)
at
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202)
at
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
[rt.jar:1.8.0_102]
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
[rt.jar:1.8.0_102]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102]
2016-10-06 10:25:52,527 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] START, GetVmsFromExternalProviderVDSCommand(HostName
= hlg-rbs-ovirt-kvm03-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'}), log id: 7c8b1e2d
2016-10-06 10:26:02,695 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]
2016-10-06 10:26:02,695 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Failed in 'GetVmsFromExternalProviderVDS' method
2016-10-06 10:26:02,696 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-118) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VDSM hlg-rbs-ovirt-kvm03-poa.rbs.com.br command failed:
Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer
2016-10-06 10:26:02,701 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Command
'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand'
return value
'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@5ce9f7f2'
2016-10-06 10:26:02,701 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Command
'GetVmsFromExternalProviderVDSCommand(HostName =
hlg-rbs-ovirt-kvm03-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'})' execution failed: VDSGenericException:
VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot
recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65
2016-10-06 10:26:02,701 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id:
7c8b1e2d
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-118) [] Query 'GetVmsFromExternalProviderQuery' failed:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-118) [] Exception:
org.ovirt.engine.core.common.errors.EngineException: EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
at
org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114)
[bll.jar:]
at
org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103)
[bll.jar:]
at
org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33)
[dal.jar:]
at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558)
[bll.jar:]
at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73)
[weld-core-impl-2.3.2.Final.jar:2.3.2.Final]
at
org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45)
[wildfly-ee-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636)
at
org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195)
at
org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73)
at
org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown
Source) [common.jar:]
at
org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53)
at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196)
at
com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172)
at
com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233)
at
com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129)
at
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132)
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73)
[branding.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84)
at
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62)
at
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36)
at
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131)
at
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51)
at
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46)
at
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64)
at
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56)
at
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60)
at
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77)
at
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50)
at
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284)
at
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263)
at
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81)
at
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174)
at
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202)
at
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
[rt.jar:1.8.0_102]
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
[rt.jar:1.8.0_102]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102]
^C
[root@hlg-rbs-ovirt01-poa ~]#
When i try with virsh i have sucess.
[root@hlg-rbs-ovirt-kvm01-poa ~]# virsh -c qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system
The authenticity of host 'prd-openshift-kvm03-poa.rbs.com.br (10.1.8.32)'
can't be established.
ECDSA key fingerprint is af:e9:12:29:65:ad:41:ab:0a:3c:a1:f0:73:1c:62:a5.
Are you sure you want to continue connecting (yes/no)? yes
root(a)prd-openshift-kvm03-poa.rbs.com.br's password:
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # list
Id Name State
----------------------------------------------------
5 prd-openshift-etcd03-poa running
6 prd-openshift-master03-poa running
8 prd-openshift-node03-poa running
virsh # list --all
Id Name State
----------------------------------------------------
5 prd-openshift-etcd03-poa running
6 prd-openshift-master03-poa running
8 prd-openshift-node03-poa running
- teste shut off
- teste1 shut off
- tpl-centos72-64 shut off
virsh # quit
[root@hlg-rbs-ovirt-kvm01-poa ~]#
Thanks.
5 years, 11 months
Change host names/IPs
by Davide Ferrari
Hello
Is there a clean way and possibly without downtime to change the hostname
and IP addresses of all the hosts in a running oVirt cluster?
--
Davide Ferrari
Senior Systems Engineer
5 years, 11 months
[Users] Lifecycle / upgradepath
by Sven Kieske
Hi Community,
Currently, there is no single document describing supported
(which means: working ) upgrade scenarios.
I think the project has matured enough, to have such an supported
upgradepath, which should be considered in the development of new
releases.
As far as I know, currently it is supported to upgrade
from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z
but not from x.y-1.z to x.y+1.z directly.
maybe this should be put together in a wiki page at least.
also it would be cool to know how long a single "release"
would be supported.
In this context I would define a release as a version
bump from x.y.z to x.y+1.z or to x+1.y.z
a bump in z would be a bugfix release.
The question is, how long will we get bugfix releases
for a given version?
What are your thoughts?
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
5 years, 11 months
[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi
Hello,
I have 2 physical servers with Opteron 2nd gen cpu.
There is CentOS 6.3 installed and some VM already configured on them.
Their /proc/cpuinfo contains
...
model name : Dual-Core AMD Opteron(tm) Processor 8222
...
kvm_amd kernel module is loaded with its default enabled nested option
# systool -m kvm_amd -v
Module = "kvm_amd"
Attributes:
initstate = "live"
refcnt = "15"
srcversion = "43D8067144E7D8B0D53D46E"
Parameters:
nested = "1"
npt = "1"
...
I already configured a fedora 17 VM as a oVirt 3.1 Engine
I'm trying to configure another VM as oVirt 3.1 node with
ovirt-node-iso-2.5.5-0.1.fc17.iso
It seems I'm not able to configure so that ovirt install doesn't complain.
After some attempts, I tried this in my vm.xml for the cpu:
<cpu mode='custom' match='exact'>
<model fallback='allow'>athlon</model>
<vendor>AMD</vendor>
<feature policy='require' name='pni'/>
<feature policy='require' name='rdtscp'/>
<feature policy='force' name='svm'/>
<feature policy='require' name='clflush'/>
<feature policy='require' name='syscall'/>
<feature policy='require' name='lm'/>
<feature policy='require' name='cr8legacy'/>
<feature policy='require' name='ht'/>
<feature policy='require' name='lahf_lm'/>
<feature policy='require' name='fxsr_opt'/>
<feature policy='require' name='cx16'/>
<feature policy='require' name='extapic'/>
<feature policy='require' name='mca'/>
<feature policy='require' name='cmp_legacy'/>
</cpu>
Inside node /proc/cpuinfo becomes
processor : 3
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : QEMU Virtual CPU version 0.12.1
stepping : 3
microcode : 0x1000065
cpu MHz : 3013.706
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni
cx16 hypervisor lahf_lm cmp_legacy cr8_legacy
bogomips : 6027.41
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
2 questions:
1) Is there any combination in xml file to give to my VM so that oVirt
doesn't complain about missing hardware virtualization with this
processor?
2) suppose 1) is not possible in my case and I still want to test the
interface and try some config operations to see for example the
differences with RHEV 3.0, how can I do?
At the moment this complaint about hw virtualization prevents me to
activate the node.
I get
Installing Host f17ovn01. Step: RHEV_INSTALL.
Host f17ovn01 was successfully approved.
Host f17ovn01 running without virtualization hardware acceleration
Detected new Host f17ovn01. Host state was set to Non Operational.
Host f17ovn01 moved to Non-Operational state.
Host f17ovn01 moved to Non-Operational state as host does not meet the
cluster's minimum CPU level. Missing CPU features : CpuFlags
Can I lower the requirements to be able to operate without hw
virtualization in 3.1?
Thanks in advance,
Gianluca
5 years, 11 months
Need VM run once api
by Chandrahasa S
This is a multipart message in MIME format.
--=_alternative 00361B2065257E90_=
Content-Type: text/plain; charset="US-ASCII"
Hi Experts,
We are integrating ovirt with our internal cloud.
Here we installed cloudinit in vm and then converted vm to template. We
deploy template with initial run parameter Hostname, IP Address, Gateway
and DNS.
but when we power ON initial, run parameter is not getting pushed to
inside the vm. But its working when we power on VM using run once option
on Ovirt portal.
I believe we need to power ON vm using run once API, but we are not able
get this API.
Can some one help on this.
I got reply on this query last time but unfortunately mail got deleted.
Thanks & Regards
Chandrahasa S
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
--=_alternative 00361B2065257E90_=
Content-Type: text/html; charset="US-ASCII"
<font size=2 face="sans-serif">Hi Experts,</font>
<br>
<br><font size=2 face="sans-serif">We are integrating ovirt with our internal
cloud.</font>
<br>
<br><font size=2 face="sans-serif">Here we installed cloudinit in vm and
then converted vm to template. We deploy template with initial run parameter
Hostname, IP Address, Gateway and DNS.</font>
<br>
<br><font size=2 face="sans-serif">but when we power ON initial, run parameter
is not getting pushed to inside the vm. But its working when we power on
VM using run once option on Ovirt portal.</font>
<br>
<br><font size=2 face="sans-serif">I believe we need to power ON vm using
run once API, but we are not able get this API.</font>
<br>
<br><font size=2 face="sans-serif">Can some one help on this.</font>
<br>
<br><font size=2 face="sans-serif">I got reply on this query last time
but unfortunately mail got deleted.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font><p>=====-----=====-----=====<br>
Notice: The information contained in this e-mail<br>
message and/or attachments to it may contain <br>
confidential or privileged information. If you are <br>
not the intended recipient, any dissemination, use, <br>
review, distribution, printing or copying of the <br>
information contained in this e-mail message <br>
and/or attachments to it are strictly prohibited. If <br>
you have received this communication in error, <br>
please notify us by reply e-mail or telephone and <br>
immediately and permanently delete the message <br>
and any attachments. Thank you</p>
<p></p>
--=_alternative 00361B2065257E90_=--
5 years, 11 months
[Users] importing from kvm into ovirt
by Jonathan Horne
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/plain; charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I need to import a kvm virtual machine from a standalone kvm into my ovirt =
cluster. Standalone is using local storage, and my ovirt cluster is using =
iscsi. Can i please have some advice on whats the best way to get this sys=
tem into ovirt?
Right now i see it as copying the .img file to somewhere=85 but i have no i=
dea where to start. I found this directory on one of my ovirt nodes:
/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v=
ms
But inside is just directories that appear to have uuid-type of names, and =
i can't tell what belongs to which vm.
Any advice would be greatly appreciated.
Thanks,
jonathan
________________________________
This is a PRIVATE message. If you are not the intended recipient, please de=
lete without copying and kindly advise us by e-mail of the mistake in deliv=
ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO=
POS to any order or other contract unless pursuant to explicit written agre=
ement or government initiative expressly permitting the use of e-mail for s=
uch purpose.
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/html; charset="Windows-1252"
Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net>
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
252">
</head>
<body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font=
-family:Calibri,sans-serif">
<div>
<div>
<div>I need to import a kvm virtual machine from a standalone kvm into my o=
virt cluster. Standalone is using local storage, and my ovirt cluster=
is using iscsi. Can i please have some advice on whats the best way =
to get this system into ovirt?</div>
</div>
</div>
<div><br>
</div>
<div>Right now i see it as copying the .img file to somewhere=85 but i have=
no idea where to start. I found this directory on one of my ovirt no=
des:</div>
<div><br>
</div>
<div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas=
ter/vms</div>
<div><br>
</div>
<div>But inside is just directories that appear to have uuid-type of names,=
and i can't tell what belongs to which vm.</div>
<div><br>
</div>
<div>Any advice would be greatly appreciated.</div>
<div><br>
</div>
<div>Thanks,</div>
<div>jonathan</div>
<br>
<hr>
<font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I=
f you are not the intended recipient, please delete without copying and kin=
dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con=
tent, this e-mail shall not operate to
bind SKOPOS to any order or other contract unless pursuant to explicit wri=
tten agreement or government initiative expressly permitting the use of e-m=
ail for such purpose.</font>
</body>
</html>
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--
6 years
Trying to reset password for ovirt wiki
by noc
This is a multi-part message in MIME format.
--------------000005070002050708050606
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hoping someone can help me out.
For some reason I keep getting the following error when I try to reset
my password:
Reset password
* Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl
[SMTP: Invalid response code received from server (code: 554,
response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)]
Complete this form to receive an e-mail reminder of your account details.
Since I receive the ML on this address it is definitely a working address.
Tried my home account too and same error but then for my home provider,
Relay denied ??
A puzzled user,
Joop
--------------000005070002050708050606
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hoping someone can help me out.<br>
For some reason I keep getting the following error when I try to
reset my password:<br>
<br>
<fieldset><legend>Reset password</legend>
<div class="error">
<ul>
<li>Error sending mail: Failed to add recipient:
<a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code
received from server (code: 554, response: 5.7.1
<a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li>
</ul>
</div>
<p>Complete this form to receive an e-mail reminder of your
account details.<br>
</p>
</fieldset>
<br>
Since I receive the ML on this address it is definitely a working
address.<br>
Tried my home account too and same error but then for my home
provider, Relay denied ??<br>
<br>
A puzzled user,<br>
<br>
Joop<br>
<br>
</body>
</html>
--------------000005070002050708050606--
6 years
ovirt-guest-agent issue on rhel5.5
by John Michael Mercado
Hi All,
I need your help. Anyone who encounter the below error and have the
solution? Can you help me how to fix this?
MainThread::INFO::2015-01-27
10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent
MainThread::ERROR::2015-01-27
10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt
guest agent!
Traceback (most recent call last):
File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ?
agent.run(daemon, pidfile)
File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run
self.agent = LinuxVdsAgent(config)
File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in
__init__
AgentLogicBase.__init__(self, config)
File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in
__init__
self.vio = VirtIoChannel(config.get("virtio", "device"))
File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in
__init__
self._stream = VirtIoStream(vport_name)
File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in
__init__
self._vport = os.open(vport_name, os.O_RDWR)
OSError: [Errno 2] No such file or directory:
'/dev/virtio-ports/com.redhat.rhevm.vdsm'
Thanks
6 years
[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn
Hello everyone,
As part of our efforts to raise awareness of and educate more developers
about the oVirt project, we will be holding an oVirt workshop at
LinuxCon Japan, taking place on June 8, 2012. You can find full details
of the workshop agenda on the LinuxCon Japan site. [0]
Registration for the workshop is now open and is free of charge for the
first 50 participants. We will also look at adding additional
participant slots to the workshop based on demand.
Attendees who register for LinuxCon Japan via the workshop registration
link [1] will also be eligible for a discount on their LinuxCon Japan
registration.
Please spread the word to folks you think would find the workshop
useful. If they have already registered for LinuxCon Japan, they can
simply edit their existing registration to include the workshop.
[0] -
https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-wo...
[1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949
Cheers,
LH
--
Leslie Hawthorn
Community Action and Impact
Open Source and Standards @ Red Hat
identi.ca/lh
twitter.com/lhawthorn
6 years
[Users] Moving iSCSI Master Data
by rni＠chef.net
--========GMXBoundary282021374122634158505
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Hi,
it's me again....
I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production
Now, I've to move the iSCSI Master data to the real iSCSI traget.
Is there any way to do this, and to become rid of the old Master Data?
Thank you for your help
Hans-Joachim
--========GMXBoundary282021374122634158505
Content-Type: text/html; charset="utf-8"
Content-Transfer-Encoding: quoted-printable
<span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /=
><br />it's me again....<br /><br />I started my oVirt 'project' as a proof=
of concept,.. but it happend as always, it became production <img alt=
=3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio=
n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02=
-516742918.gif" /><br /><br />Now, I've to move the iSCSI Master data to th=
e real iSCSI traget.<br />Is there any way to do this, and to become rid of=
the old Master Data?<br /><br /><span id=3D"editor_signature">Thank you fo=
r your help</span><br /><br />Hans-Joachim</span></span>
--========GMXBoundary282021374122634158505--
6 years
[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto
--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: multipart/alternative;
boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_"
--_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi all,
I can't login to the hypervisor, neither as root nor as admin, neither from=
another computer via ssh nor directly on the machine.
I'm sure I remember the passwords. This is not the first time it happens: l=
ast time I reinstalled the host. Everything worked ok for about 2 weeks, an=
d then...
What's going on? Is it a known behavior, somehow?
Before rebooting the hypervisor, I would like to try something. RHEV Manage=
r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how=
?
Thank you all.
Alberto Scotto
[Blue]
Via Cardinal Massaia, 83
10147 - Torino - ITALY
phone: +39 011 29100
al.scotto(a)reply.it
www.reply.it
________________________________
--
The information transmitted is intended for the person or entity to which i=
t is addressed and may contain confidential and/or privileged material. Any=
review, retransmission, dissemination or other use of, or taking of any ac=
tion in reliance upon, this information by persons or entities other than t=
he intended recipient is prohibited. If you received this in error, please =
contact the sender and delete the material from any computer.
--_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<style>
<!--
@font-face
{font-family:Calibri}
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif"}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline}
span.EmailStyle17
{font-family:"Calibri","sans-serif";
color:windowtext}
.MsoChpDefault
{font-family:"Calibri","sans-serif"}
@page WordSection1
{margin:70.85pt 2.0cm 2.0cm 2.0cm}
div.WordSection1
{}
-->
</style>
</head>
<body lang=3D"IT" link=3D"blue" vlink=3D"purple">
<div class=3D"WordSection1">
<p class=3D"MsoNormal"><span lang=3D"EN-US">Hi all,</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">I can’t login to the hype=
rvisor, neither as root nor as admin, neither from another computer via ssh=
nor directly on the machine.</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">I’m sure I remember the p=
asswords. This is not the first time it happens: last time I reinstalled th=
e host. Everything worked ok for about 2 weeks, and then...</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">What’s going on? Is it a =
known behavior, somehow?</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Before rebooting the hypervisor=
, I would like to try something. RHEV Manager talks to RHEV-H without any p=
roblems. Can I login with RHEV-M’s keys? how?</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> </span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Thank you all.</span></p>
</div>
<br>
<br>
<div align=3D"left">
<p style=3D"font-family:Calibri,Sans-Serif; font-size:10pt"><span style=3D"=
color:#000000; font-weight:bold">Alberto Scotto</span>
<span style=3D"color:#808080"></span><br>
<br>
<span style=3D"color:#000000"><img border=3D"0" alt=3D"Blue" src=3D"cid:bde=
5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px">
</span><br>
<span style=3D"color:#808080">Via Cardinal Massaia, 83<br>
10147 - Torino - ITALY <br>
phone: +39 011 29100 <br>
<a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora=
tion:underline">al.scotto(a)reply.it</a>
<br>
<a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d=
ecoration:underline">www.reply.it</a>
</span><br>
</p>
</div>
<br>
<hr>
<font face=3D"Arial" color=3D"Gray" size=3D"1"><br>
--<br>
The information transmitted is intended for the person or entity to which i=
t is addressed and may contain confidential and/or privileged material. Any=
review, retransmission, dissemination or other use of, or taking of any ac=
tion in reliance upon, this information
by persons or entities other than the intended recipient is prohibited. If=
you received this in error, please contact the sender and delete the mater=
ial from any computer.<br>
</font>
</body>
</html>
--_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--
--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: image/png; name="blue.png"
Content-Description: blue.png
Content-Disposition: inline; filename="blue.png"; size=2834;
creation-date="Tue, 11 Sep 2012 14:14:44 GMT";
modification-date="Tue, 11 Sep 2012 14:14:44 GMT"
Content-ID: <bde5ac62d10545908e269a6006dbd5ac>
Content-Transfer-Encoding: base64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--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--
6 years, 1 month
Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez
On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed?
I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs..
I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab,
on any case LogonVDScommand appears.
There is other option to make it work now?
Thanks in advance,
Felipe
6 years, 1 month
Re: [ovirt-users] Need VM run once api
by Chandrahasa S
This is a multipart message in MIME format.
--=_alternative 00199D2865257E91_=
Content-Type: text/plain; charset="US-ASCII"
Can any one help on this.
Thanks & Regards
Chandrahasa S
From: Chandrahasa S/MUM/TCS
To: users(a)ovirt.org
Date: 28-07-2015 15:20
Subject: Need VM run once api
Hi Experts,
We are integrating ovirt with our internal cloud.
Here we installed cloudinit in vm and then converted vm to template. We
deploy template with initial run parameter Hostname, IP Address, Gateway
and DNS.
but when we power ON initial, run parameter is not getting pushed to
inside the vm. But its working when we power on VM using run once option
on Ovirt portal.
I believe we need to power ON vm using run once API, but we are not able
get this API.
Can some one help on this.
I got reply on this query last time but unfortunately mail got deleted.
Thanks & Regards
Chandrahasa S
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
--=_alternative 00199D2865257E91_=
Content-Type: text/html; charset="US-ASCII"
<font size=2 face="sans-serif">Can any one help on this.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">From:
</font><font size=1 face="sans-serif">Chandrahasa S/MUM/TCS</font>
<br><font size=1 color=#5f5f5f face="sans-serif">To:
</font><font size=1 face="sans-serif">users(a)ovirt.org</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Date:
</font><font size=1 face="sans-serif">28-07-2015 15:20</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Subject:
</font><font size=1 face="sans-serif">Need VM run
once api</font>
<br>
<hr noshade>
<br>
<br><font size=2 face="sans-serif">Hi Experts,</font>
<br>
<br><font size=2 face="sans-serif">We are integrating ovirt with our internal
cloud.</font>
<br>
<br><font size=2 face="sans-serif">Here we installed cloudinit in vm and
then converted vm to template. We deploy template with initial run parameter
Hostname, IP Address, Gateway and DNS.</font>
<br>
<br><font size=2 face="sans-serif">but when we power ON initial, run parameter
is not getting pushed to inside the vm. But its working when we power on
VM using run once option on Ovirt portal.</font>
<br>
<br><font size=2 face="sans-serif">I believe we need to power ON vm using
run once API, but we are not able get this API.</font>
<br>
<br><font size=2 face="sans-serif">Can some one help on this.</font>
<br>
<br><font size=2 face="sans-serif">I got reply on this query last time
but unfortunately mail got deleted.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font>
<br><p>=====-----=====-----=====<br>
Notice: The information contained in this e-mail<br>
message and/or attachments to it may contain <br>
confidential or privileged information. If you are <br>
not the intended recipient, any dissemination, use, <br>
review, distribution, printing or copying of the <br>
information contained in this e-mail message <br>
and/or attachments to it are strictly prohibited. If <br>
you have received this communication in error, <br>
please notify us by reply e-mail or telephone and <br>
immediately and permanently delete the message <br>
and any attachments. Thank you</p>
<p></p>
--=_alternative 00199D2865257E91_=--
6 years, 1 month
Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron
Hi Lucas,
Please send mails to the list next time.
can you please do rpm -qa |grep qemu.
also, can you try a different windows image?
Thanks,
Dafna
On 07/14/2014 02:03 PM, lucas castro wrote:
> On the host there I've tried to run the vm, I use a centOS 6.5
> and checked, no update for qemu, libvirt or related package.
--
Dafna Ron
6 years, 1 month
Feature: Hosted engine VM management
by Roy Golan
Hi all,
Upcoming in 3.6 is enhancement for managing the hosted engine VM.
In short, we want to:
* Allow editing the Hosted engine VM, storage domain, disks, networks etc
* Have a shared configuration for the hosted engine VM
* Have a backup for the hosted engine VM configuration
please review and comment on the wiki below:
http://www.ovirt.org/Hosted_engine_VM_management
Thanks,
Roy
6 years, 2 months
Re: [ovirt-users] Large DWH Database, how to empty
by Matt .
Hi,
OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB
already dropped with around 500MB directly and is now at 2GB smaller.
Does this sounds familiar to you with other settings in 4.0.5 ?
Thanks,
Matt
2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>:
> No. That will corrupt your database.
>
> Are you using the full dwh or the smaller version for the dashboards?
>
> Please set the delete thresholds to save less data and the data older then
> the time you set will be deleted.
> Add a file to /ovirt-engine-dwhd.conf.d/
> update_time_to_keep_records.conf
>
> Add these lines with the new configurations. The numbers represent the hours
> to keep the data.
>
> DWH_TABLES_KEEP_SAMPLES=24
> DWH_TABLES_KEEP_HOURLY=1440
> DWH_TABLES_KEEP_DAILY=43800
>
>
> These are the configurations for a full dwh.
>
> The smaller version configurations are:
> DWH_TABLES_KEEP_SAMPLES=24
> DWH_TABLES_KEEP_HOURLY=720
> DWH_TABLES_KEEP_DAILY=0
>
> The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3)
>
> Best regards,
>
> Shirly Radco
>
> BI Software Engineer
> Red Hat Israel Ltd.
> 34 Jerusalem Road
> Building A, 4th floor
> Ra'anana, Israel 4350109
>
>
> On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote:
>>
>> Hi,
>>
>> I seem to have some large database for the DWH logging and I wonder
>> how I can empty it safely.
>>
>> Can I just simply empty the database ?
>>
>> Have a good weekend!
>>
>> Cheers,
>>
>> Matt
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
6 years, 2 months
Re: [ovirt-users] Packet loss
by Doron Fediuck
----_com.android.email_640187878761650
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: base64
SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0
IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg
Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg
----_com.android.email_640187878761650
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: base64
PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0
L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv
ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi
dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg
aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg
cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4=
----_com.android.email_640187878761650--
6 years, 2 months
Unable to backend oVirt with Cinder
by Logan Kuhn
------=_Part_51316288_608143832.1472587678781
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
I've got Cinder configured and pointed at Ceph for it's back end storage. I can run ceph commands on the cinder machine and cinder is configured for noauth and I've also tried it with Keystone for auth. I can run various cinder commands and it'll return as expected.
When I configure it in oVirt it'll add the external provider fine, but when I go to create a disk it doesn't populate the volume type field, it's just empty. The corresponding command for cinder: cinder type-list and cinder type-show <name> returns fine and it is public.
Ovirt and Cinder are on the same host so it isn't a firewall issue.
Cinder config:
[DEFAULT]
rpc_backend = rabbit
#auth_strategy = keystone
auth_strategy = noauth
enabled_backends = ceph
#glance_api_servers = http://10.128.7.252:9292
#glance_api_version = 2
#[keystone_authtoken]
#auth_uri = http://10.128.7.252:5000/v3
#auth_url = http://10.128.7.252:35357/v3
#auth_type = password
#memcached_servers = localhost:11211
#project_domain_name = default
#user_domain_name = default
#project_name = services
#username = user
#password = pass
[ceph]
volume_driver = cinder.volume.drivers.rbd.RBDDriver
volume_backend_name = ceph
rbd_pool = ovirt-images
rbd_user = cinder
rbd_secret_uuid = <secret>
rbd_ceph_conf = /etc/ceph/ceph.conf
rbd_flatten_volume_from_snapshot = true
rbd_max_clone_depth = 5
rbd_store_chunk_size = 4
rados_connect_timeout = -1
#glance_api_version = 2
[database]
connection = postgresql://user:pass@10.128.2.33/cinder
[oslo_concurrency]
lock_path = /var/lib/cinder/tmp
[oslo_messaging_rabbit]
rabbit_host = localhost
rabbit_port = 5672
rabbit_userid = user
rabbit_password = pass
Regards,
Logan
------=_Part_51316288_608143832.1472587678781
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: Arial; font-size: 12pt; color: #0000=
00"><div>I've got Cinder configured and pointed at Ceph for it's back end s=
torage. I can run ceph commands on the cinder machine and cinder is c=
onfigured for noauth and I've also tried it with Keystone for auth. I=
can run various cinder commands and it'll return as expected. </=
div><div><br data-mce-bogus=3D"1"></div><div>When I configure it in oVirt i=
t'll add the external provider fine, but when I go to create a disk it does=
n't populate the volume type field, it's just empty. The correspondin=
g command for cinder: cinder type-list and cinder type-show <name> re=
turns fine and it is public. </div><div><br data-mce-bogus=3D"1"></div=
><div>Ovirt and Cinder are on the same host so it isn't a firewall issue.</=
div><div><br data-mce-bogus=3D"1"></div><div>Cinder config:</div><div>[DEFA=
ULT]<br>rpc_backend =3D rabbit<br>#auth_strategy =3D keystone<br>auth_strat=
egy =3D noauth<br>enabled_backends =3D ceph<br>#glance_api_servers =3D http=
://10.128.7.252:9292<br>#glance_api_version =3D 2<br><br>#[keystone_authtok=
en]<br>#auth_uri =3D http://10.128.7.252:5000/v3<br>#auth_url =3D http://10=
.128.7.252:35357/v3<br>#auth_type =3D password<br>#memcached_servers =3D lo=
calhost:11211<br>#project_domain_name =3D default<br>#user_domain_name =3D =
default<br>#project_name =3D services<br>#username =3D user<br>#passwo=
rd =3D pass<br><br>[ceph]<br>volume_driver =3D cinder.volume.drivers.rbd.RB=
DDriver<br>volume_backend_name =3D ceph<br>rbd_pool =3D ovirt-images<br>rbd=
_user =3D cinder<br>rbd_secret_uuid =3D <secret><br>rbd_ceph_con=
f =3D /etc/ceph/ceph.conf<br>rbd_flatten_volume_from_snapshot =3D true<br>r=
bd_max_clone_depth =3D 5<br>rbd_store_chunk_size =3D 4<br>rados_connect_tim=
eout =3D -1<br>#glance_api_version =3D 2<br><br>[database]<br>connection =
=3D postgresql://user:pass@10.128.2.33/cinder<br><br>[oslo_concurrency]<br>=
lock_path =3D /var/lib/cinder/tmp<br><br>[oslo_messaging_rabbit]<br>rabbit_=
host =3D localhost<br>rabbit_port =3D 5672<br>rabbit_userid =3D <span =
style=3D"color: #000000; font-family: Arial; font-size: 16px; font-style: n=
ormal; font-variant-ligatures: normal; font-variant-caps: normal; font-weig=
ht: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-a=
lign: start; text-indent: 0px; text-transform: none; white-space: normal; w=
idows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: inlin=
e !important; float: none; background-color: #ffffff;" data-mce-style=3D"co=
lor: #000000; font-family: Arial; font-size: 16px; font-style: normal; font=
-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal;=
letter-spacing: normal; line-height: normal; orphans: 2; text-align: start=
; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; w=
ord-spacing: 0px; -webkit-text-stroke-width: 0px; display: inline !importan=
t; float: none; background-color: #ffffff;">user</span><br>rabbit_password =
=3D <span style=3D"color: #000000; font-family: Arial; font-size: 16px=
; font-style: normal; font-variant-ligatures: normal; font-variant-caps: no=
rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp=
hans: 2; text-align: start; text-indent: 0px; text-transform: none; white-s=
pace: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;=
display: inline !important; float: none; background-color: #ffffff;" data-=
mce-style=3D"color: #000000; font-family: Arial; font-size: 16px; font-styl=
e: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-=
weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; te=
xt-align: start; text-indent: 0px; text-transform: none; white-space: norma=
l; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: i=
nline !important; float: none; background-color: #ffffff;">pass</span></div=
><div><br></div><div data-marker=3D"__SIG_PRE__">Regards,<br>Logan</div></d=
iv></body></html>
------=_Part_51316288_608143832.1472587678781--
6 years, 10 months
vdsClient is removed and replaced by vdsm-client
by Irit Goihman
Hi All,
vdsClient will be removed from master branch today.
It is using XMLRPC protocol which has been deprecated and replaced by
JSON-RPC.
A new client for vdsm was introduced in 4.1: vdsm-client.
This is a simple client that uses JSON-RPC protocol which was introduced in
ovirt 3.5.
The client is not aware of the available methods and parameters, and you
should consult
the schema [1] in order to construct the desired command.
Future version should parse the schema and provide online help.
If you're using vdsClient, we will be happy to assist you in migrating to
the new vdsm client.
*vdsm-client usage:*
vdsm-client [-h] [-a ADDRESS] [-p PORT] [--unsecure] [--timeout TIMEOUT]
[-f FILE] namespace method [name=value [name=value] ...]
Invoking simple methods:
# vdsm-client Host getVMList
['b3f6fa00-b315-4ad4-8108-f73da817b5c5']
For invoking methods with many or complex parameters, you can read
the parameters from a JSON format file:
# vdsm-client Lease info -f lease.json
where lease.json file content is:
{
"lease": {
"sd_id": "75ab40e3-06b1-4a54-a825-2df7a40b93b2",
"lease_id": "b3f6fa00-b315-4ad4-8108-f73da817b5c5"
}
}
It is also possible to read parameters from standard input, creating
complex parameters interactively:
# cat <<EOF | vdsm-client Lease info -f -
{
"lease": {
"sd_id": "75ab40e3-06b1-4a54-a825-2df7a40b93b2",
"lease_id": "b3f6fa00-b315-4ad4-8108-f73da817b5c5"
}
}
EOF
*Constructing a command from vdsm schema:*
Let's take VM.getStats as an example.
This is the entry in the schema:
VM.getStats:
added: '3.1'
description: Get statistics about a running virtual machine.
params:
- description: The UUID of the VM
name: vmID
type: *UUID
return:
description: An array containing a single VmStats record
type:
- *VmStats
namespace: VM
method name: getStats
params: vmID
The vdsm-client command is:
# vdsm-client VM getStats vmID=b3f6fa00-b315-4ad4-8108-f73da817b5c5
*Invoking getVdsCaps command:*
# vdsm-client Host getCapabilities
Please consult vdsm-client help and man page for further details and
options.
[1] https://github.com/oVirt/vdsm/blob/master/lib/api/vdsm-api.yml
--
Irit Goihman
Software Engineer
Red Hat Israel Ltd.
7 years
Passing VLAN trunk to VM
by Simon Vincent
Is it possible to pass multiple VLANs to a VM (pfSense) using a single
virtual NIC? All my existing oVirt networks are setup as a single tagged
VLAN. I know this didn't used to be supported but wondered if this has
changed. My other option is to pass each VLAN as a separate NIC to the VM
however if I needed to add a new VLAN I would have to add a new interface
and reboot the VM as hot-add of NICs is not supported by pfSense.
7 years, 1 month
HostedEngine with HA
by Carlos Rodrigues
Hello,
I have one cluster with two hosts with power management correctly
configured and one virtual machine with HostedEngine over shared
storage with FiberChannel.
When i shutdown the network of host with HostedEngine VM, it should be
possible the HostedEngine VM migrate automatically to another host?
What is the expected behaviour on this HA scenario?
Regards,
--
Carlos Rodrigues
Engenheiro de Software Sénior
Eurotux Informática, S.A. | www.eurotux.com
(t) +351 253 680 300 (m) +351 911 926 110
7 years, 1 month
when creating VMs, I don't want hosted_storage to be an option
by Mike Farnam
Hi All - Is that a way to mark hosted_storage somehow so that it’s not available to add new VMs to? Right now it’s the default storage domain when adding a VM. At the least, I’d like to make another storage domain the default.
Is there a way to do this?
Thanks
7 years, 2 months
Official Hyperconverged Gluster oVirt upgrade procedure?
by Hanson
Hi Guys,
Just wondering if we have an updated manual or whats the current
procedure for upgrading the nodes in a hyperconverged ovirt gluster pool?
Ie Nodes run 4.0 oVirt, as well as GlusterFS, and hosted-engine running
in a gluster storage domain.
Put node in maintenance mode and disable glusterfs from ovirt gui, run
yum update?
Thanks!
7 years, 3 months
[vdsm] status update: running containers alongside VMs
by Francesco Romani
Hi everyone,
I'm happy to share some progress about the former "convirt"[1] project,
which aims to let Vdsm containers alongside VMs, on bare metal.
In the last couple of months I kept updating the patch series, which
is approaching the readiness to be merged in Vdsm.
Please read through this mail to see what the patchset can do now,
how you could try it *now*, even before it is merged.
Everyone is invited to share thoughts and ideas about how this effort
could evolve.
This will be a long mail; I will amend, enhance and polish the content
and make a blog post (on https://mojaves.github.io) to make it easier
to consume and to have some easy-to-find documentation. Later on the
same content will appear also on the oVirt blog.
Happy hacking!
+++
# How to try how the experimental container support for Vdsm.
Vdsm is gaining *experimental* support to run containers alongside VMs.
Vdsm had since long time the ability to manage VMs which run containers,
and recently gained support for
[atomic guests](http://www.projectatomic.io/blog/2015/01/running-ovirt-guest-agent-as-privileged-container/).
With the new support we are describing, you will be able to manage containers
with the same, proven infrastructure that let you manage VMs.
This feature is currently being developed and it is still not merged in the
Vdsm codebase, so some extra work is needed if you want to try it out.
We aiming to merge it in the oVirt 4.1.z cycle.
## What works, aka what to expect
The basic features are expected to work:
1. Run any docker image on the public docker registry
2. Make the container accessible from the outside (aka not just from localhost)
3. Use file-based storage for persistent volumes
## What does not yet work, aka what NOT to expect
Few things are planned and currently under active development:
1. Monitoring. Engine will not get any update from the container besides "VM" status (Up, Down...)
One important drawback is that you will not be told the IP of the container from Engine,
you will need to connect to the Vdsm host to discover it using standard docker tools.
2. Proper network integration. Some steps still need manual intervention
3. Stability and recovery - it's pre-alpha software after all! :)
## 1. Introduction and prerequisites
Trying out container support affects only the host and the Vdsm.
Besides add few custom properties (totally safe and supported since early
3.z), there are zero changes required to the DB and to Engine.
Nevertheless, we recommend to dedicate one oVirt 4.y environment,
or at least one 4.y host, to try out the container feature.
To get started, first thing you need is to setup a vanilla oVirt 4.y
installation. We will need to make changes to the Vdsm and to the
Vdsm host, so hosted engine and/or oVirt node may add extra complexity,
better to avoid them at the moment.
The reminder of this tutorial assumes you are using two hosts,
one for Vdsm (will be changed) and one for Engine (will require zero changes);
furthermore, we assume the Vdsm host is running on CentOS 7.y.
We require:
- one test host for Vdsm. This host need to have one NIC dedicated to containers.
We will use the [docker macvlan driver](https://raesene.github.io/blog/2016/07/23/Docker-MacVLAN/),
so this NIC *must not be* part of one bridge.
- docker >= 1.12
- oVirt >= 4.0.5 (Vdsm >= 4.18.15)
- CentOS >= 7.2
Docker >= 1.12 is avaialable for download [here](https://docs.docker.com/engine/installation/linux/centos/)
Caveats:
1. docker from official rpms conflicts con docker from CentOS, and has a different package name: docker-engine vs docker.
Please note that the kubernetes package from CentOS, for example, require 'docker', not 'docker-engine'.
2. you may want to replace the default service file
[with this one](https://github.com/mojaves/convirt/blob/master/patches/centos72/syst...
and to use this
[sysconfig file](https://github.com/mojaves/convirt/blob/master/patches/centos72/sys....
Here I'm just adding the storage options docker requires, much like the CentOS docker is configured.
Configuring docker like this can save you some troubleshooting, especially if you had docker from CentOS installed
on the testing box.
## 2. Patch Vdsm to support containers
You need to patch and rebuild Vdsm.
Fetch [this patch](https://github.com/mojaves/convirt/blob/master/patches/vdsm/4.18.1...
and apply it against Vdsm 4.18.15.1. Vdsm 4.18.15.{1,2,...} are supported as well.
Rebuild Vdsm and reinstall on your box.
[centos 7.2 packages are here](https://github.com/mojaves/convirt/tree/master/rpms/centos72)
Make sure you install the Vdsm command line client (vdsm-cli)
Restart *both* Vdsm and Supervdsm, make sure Engine still works flawlessly with patched Vdsm.
This ensure that no regression is introduced, and that your environment can run VMs just as before.
Now we can proceed adding the container support.
start docker:
# systemctl start docker-engine
(optional)
# systemctl enable docker-engine
Restart Vdsm again
# systemctl restart vdsm
Now we can check if Vdsm detects docker, so you can use it:
still on the same Vdsm host, run
$ vdsClient -s 0 getVdsCaps | grep containers
containers = ['docker', 'fake']
This means this Vdsm can run containers using 'docker' and 'fake' runtimes.
Ignore the 'fake' runtime; as the name suggests, is a test driver, kinda like /dev/null.
Now we need to make sure the host network configuration is fine.
### 2.1. Configure the docker network for Vdsm
PLEASE NOTE
that the suggested network configuration assumes that
* you have one network, `ovirtmgmt` (the default one) you use for everything
* you have one Vdsm host with at least two NICs, one bound to the `ovirtmgmt` network, and one spare
_This step is not yet automated by Vdsm_, so manual action is needed; Vdsm will take
care of this automatically in the future.
You can use
[this helper script](https://github.com/mojaves/convirt/blob/master/patches/vdsm/cont-...,
which reuses the Vdsm libraries. Make sure
you have patched Vdsm to support container before to use it.
Let's review what the script needs:
# ./cont-setup-net -h
usage: cont-setup-net [-h] [--name [NAME]] [--bridge [BRIDGE]]
[--interface [INTERFACE]] [--gateway [GATEWAY]]
[--subnet [SUBNET]] [--mask [MASK]]
optional arguments:
-h, --help show this help message and exit
--name [NAME] network name to use
--bridge [BRIDGE] bridge to use
--interface [INTERFACE]
interface to use
--gateway [GATEWAY] address of the gateway
--subnet [SUBNET] subnet to use
--mask [MASK] netmask to use
So we need to feed --name, --interface, --gateway, --subnet and optionally --mask (default, /24, is often fine).
For my case the default mask was indeed fine, so I used the script like this:
# ./cont-setup-net --name ovirtmgmt --interface enp3s0 --gateway 192.168.1.1 --subnet 192.168.1.0
Thhis is the output I got:
DEBUG:virt.containers.runtime:configuring runtime 'docker'
DEBUG:virt.containers.command:* calling ['/bin/docker', 'network', 'inspect', 'ovirtmgmt']
Error: No such network: ovirtmgmt
DEBUG:virt.containers.command:* called ['/bin/docker', 'network', 'inspect', 'ovirtmgmt']
DEBUG:virt.containers.runtime.Docker:config: cannot load 'ovirtmgmt', ignored
DEBUG:virt.containers.command:* calling ['/bin/docker', 'network', 'create', '-d', 'macvlan', '--subnet=192.168.1.0/24', '--gateway=192.168.1.1', '--ip-range=192.168.1.0/24', '-o', 'parent=enp3s0', 'ovirtmgmt']
DEBUG:virt.containers.command:* called ['/bin/docker', 'network', 'create', '-d', 'macvlan', '--subnet=192.168.1.0/24', '--gateway=192.168.1.1', '--ip-range=192.168.1.0/24', '-o', 'parent=enp3s0', 'ovirtmgmt']
DEBUG:virt.containers.runtime:configuring runtime 'fake'
You can clearly see what the script did, and why it needed the root privileges. Let's deoublecheck using the docker tools:
# docker network ls
NETWORK ID NAME DRIVER SCOPE
91535f3425a8 bridge bridge local
d42f7e5561b5 host host local
621ab6dd49b1 none null local
f4b88e4a67eb ovirtmgmt macvlan local
# docker network inspect ovirtmgmt
[
{
"Name": "ovirtmgmt",
"Id": "f4b88e4a67ebb7886ec74073333d613b1893272530cae4d407c95ab587c5fea1",
"Scope": "local",
"Driver": "macvlan",
"EnableIPv6": false,
"IPAM": {
"Driver": "default",
"Options": {},
"Config": [
{
"Subnet": "192.168.1.0/24",
"IPRange": "192.168.1.0/24",
"Gateway": "192.168.1.1"
}
]
},
"Internal": false,
"Containers": {},
"Options": {
"parent": "enp3s0"
},
"Labels": {}
}
]
Looks good! the host configuration is completed. Let's move to the Engine side.
## 3. Configure Engine
As mentioned above, we need now to configure Engine. This boils down to:
Add a few custom properties for VMs:
In case you were already using custom properties, you need to amend the command
line to not overwrite your existing ones.
# engine-config -s UserDefinedVMProperties='volumeMap=^[a-zA-Z_-]+:[a-zA-Z_-]+$;containerImage=^[a-zA-Z]+(://|)[a-zA-Z]+$;containerType=^(docker|rkt)$' --cver=4.0
It is worth stressing that while the variables are container-specific,
the VM custom properties are totally inuntrusive and old concept in oVirt, so
this step is totally safe.
Now restart Engine to let it use the new variables:
# systemctl restart ovirt-engine
The next step is actually configure one "container VM" and run it.
## 4. Create the container "VM"
To finally run a container, you start creating a VM much like you always did, with
few changes
1. most of the hardware-related configuration isn't relevant for container "VMs",
besides cpu share and memory limits; this will be better documented in the
future; unneeded configuration will just be ignored
2. You need to set some custom properties for your container "VM". Those are
actually needed to enable the container flow, and they are documented in
the next section. You *need* to set at least `containerType` and `containerImage`.
### 4.2. Custom variables for container support
The container support needs some custom properties to be properly configured:
1. `containerImage` (*needed* to enable the container system).
Just select the target image you want to run. You can use the standard syntax of the
container runtimes.
2. `containerType` (*needed* to enable the container system).
Selects the container runtime you want to use. All the available options are always showed.
Please note that unavailable container options are not yet grayed out.
If you *do not* have rkt support on your host, you still can select it, but it won't work.
3. `volumeMap` key:value like. You can map one "VM" disk (key) to one container volume (value),
to have persistent storage. Only file-based storage is supported.
Example configuration:
`containerImage = redis`
`containerType = docker`
`volumeMap = vda:data` (this may not be needed, and the volume label is just for illustrative purposes)
### 4.2. A little bit of extra work: preload the images on the Vdsm host
This step is not needed by the flow, and will be handled by oVirt in the future.
The issue is how the container image are handled. They are stored by the container
management system (rkt, docker) on each host, and they are not pre-downloaded.
To shorten the duration of the first boot, you are advised to pre-download
the image(s) you want to run. For example
## on the Vdsm host you want to use with containers
# docker pull redis
## 5. Run the container "VM"
You are now all set to run your "VM" using oVirt Engine, just like any existing VM.
Some actions doesn't make sense for a container "VM", like live migration.
Engine won't stop you to try to do those actions, but they will fail gracefully
using the standard errors.
## 6. Next steps
What to expect from this project in the future?
For the integration with Vdsm, we want to fix the existing known issues, most notably:
* add proper monitoring/reporting of the container health
* ensure proper integration of the container image store with oVirt storage management
* streamline the network configuration
What is explicitely excluded yet is any Engine change. This is a Vdsm-only change at the
moment, so fixing the following is currently unplanned:
* First and foremost, Engine will not distinguish between real VMs and container VMs.
Actions unavailable to container will not be hidden from UI. Same for monitoring
and configuration data, which will be ignored.
* Engine is NOT aware of the volumes one container can use. You must inspect and do the
mapping manually.
* Engine is NOT aware of the available container runtimes. You must select it carefully
Proper integration with Engine may be added in the future once this feature exits
from the experimental/provisional stage.
Thanks for reading, make sure to share your thoughts on the oVirt mailing lists!
+++
[1] we keep calling it that way _only_ internally, because it's a short
name we are used to. After the merge/once we release it, we will use
a different name, like "vdsm-containers" or something like it.
--
Francesco Romani
Red Hat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
7 years, 3 months
Empty cgroup files on centos 7.3 host
by Florian Schmid
Hi,
I wanted to monitor disk IO and R/W on all of our oVirt centos 7.3 hypervisor hosts, but it looks like that all those files are empty.
For example:
ls -al /sys/fs/cgroup/blkio/machine.slice/machine-qemu\\x2d14\\x2dHostedEngine.scope/
insgesamt 0
drwxr-xr-x. 2 root root 0 30. Mai 10:09 .
drwxr-xr-x. 16 root root 0 26. Jun 09:25 ..
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_merged
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_merged_recursive
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_queued
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_queued_recursive
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_bytes
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_bytes_recursive
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_serviced
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_serviced_recursive
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_time
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_time_recursive
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_wait_time
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_wait_time_recursive
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.leaf_weight
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.leaf_weight_device
--w-------. 1 root root 0 30. Mai 10:09 blkio.reset_stats
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.sectors
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.sectors_recursive
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.io_service_bytes
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.io_serviced
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.read_bps_device
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.read_iops_device
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.write_bps_device
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.write_iops_device
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.time
-r--r--r--. 1 root root 0 30. Mai 10:09 blkio.time_recursive
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.weight
-rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.weight_device
-rw-r--r--. 1 root root 0 30. Mai 10:09 cgroup.clone_children
--w--w--w-. 1 root root 0 30. Mai 10:09 cgroup.event_control
-rw-r--r--. 1 root root 0 30. Mai 10:09 cgroup.procs
-rw-r--r--. 1 root root 0 30. Mai 10:09 notify_on_release
-rw-r--r--. 1 root root 0 30. Mai 10:09 tasks
I thought, I can get my needed values from there, but all files are empty.
Looking at this post: http://lists.ovirt.org/pipermail/users/2017-January/079011.html
this should work.
Is this normal on centos 7.3 with oVirt installed? How can I get those values, without monitoring all VMs directly?
oVirt Version we use:
4.1.1.8-1.el7.centos
BR Florian
7 years, 4 months
Re: [ovirt-users] iSCSI domain on 4kn drives
by Martijn Grendelman
--------------DE48748F7C67E1FABE46EEAF
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Op 7-8-2016 om 8:19 schreef Yaniv Kaul:
>
> On Fri, Aug 5, 2016 at 4:42 PM, Martijn Grendelman
> <martijn.grendelman(a)isaac.nl <mailto:martijn.grendelman@isaac.nl>> wrote:
>
> Op 4-8-2016 om 18:36 schreef Yaniv Kaul:
>> On Thu, Aug 4, 2016 at 11:49 AM, Martijn Grendelman
>> <martijn.grendelman(a)isaac.nl
>> <mailto:martijn.grendelman@isaac.nl>> wrote:
>>
>> Hi,
>>
>> Does oVirt support iSCSI storage domains on target LUNs using
>> a block
>> size of 4k?
>>
>>
>> No, we do not - not if it exposes 4K blocks.
>> Y.
>
> Is this on the roadmap?
>
>
> Not in the short term roadmap.
> Of course, patches are welcome. It's mainly in VDSM.
> I wonder if it'll work in NFS.
> Y.
I don't think I ever replied to this, but I can confirm that in RHEV 3.6
it works with NFS.
Best regards,
Martijn.
--------------DE48748F7C67E1FABE46EEAF
Content-Type: text/html; charset="utf-8"
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Op 7-8-2016 om 8:19 schreef Yaniv Kaul:<br>
<blockquote
cite="mid:280cfbd3a16ad1b76cc7de56bda88f45,CAJgorsbJHLV1e3fH4b4AR3GBp1oi44fDhfeii+PQ1iY1RwUStw@mail.gmail.com"
type="cite">
<div dir="ltr"><br>
<div class="gmail_extra">On Fri, Aug 5, 2016 at 4:42 PM, Martijn
Grendelman <span dir="ltr"><<a moz-do-not-send="true"
href="mailto:martijn.grendelman@isaac.nl" target="_blank">martijn.grendelman(a)isaac.nl</a>></span>
wrote:<br>
<div class="gmail_quote">
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"> Op 4-8-2016 om
18:36 schreef Yaniv Kaul:<br>
<blockquote type="cite">
<div dir="ltr">
<div class="gmail_extra">
<div class="gmail_quote"><span class="">On Thu,
Aug 4, 2016 at 11:49 AM, Martijn Grendelman <span
dir="ltr"><<a moz-do-not-send="true"
href="mailto:martijn.grendelman@isaac.nl"
target="_blank">martijn.grendelman(a)isaac.nl</a>></span>
wrote:<br>
</span><span class="">
<blockquote class="gmail_quote"
style="margin:0 0 0 .8ex;border-left:1px
#ccc solid;padding-left:1ex">Hi,<br>
<br>
Does oVirt support iSCSI storage domains on
target LUNs using a block<br>
size of 4k?<br>
</blockquote>
<div><br>
</div>
</span><span class="">
<div>No, we do not - not if it exposes 4K
blocks.</div>
<div>Y.</div>
</span></div>
</div>
</div>
</blockquote>
<br>
Is this on the roadmap?<br>
</div>
</blockquote>
<div><br>
</div>
<div>Not in the short term roadmap.</div>
<div>Of course, patches are welcome. It's mainly in VDSM.</div>
<div>I wonder if it'll work in NFS.</div>
<div>Y.</div>
</div>
</div>
</div>
</blockquote>
<br>
I don't think I ever replied to this, but I can confirm that in RHEV
3.6 it works with NFS.<br>
<br>
Best regards,<br>
Martijn.<br>
</body>
</html>
--------------DE48748F7C67E1FABE46EEAF--
7 years, 5 months
Re: [ovirt-users] How to import a qcow2 disk into ovirt
by Martín Follonier
Hi,
I've done all the recommendations in this thread, and I'm still getting the
"Paused by System" message just after the transfer starts.
Honestly I don't know were else to look at, cause I don't find any log
entry or packet capture that give me a hint about what is happening.
I'll appreciate any help! Thank you in advance!
Regards
Martin
On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
> You can do both,
> Through the database, the table is "vdc_options". change "option_value"
> where "option_name" = 'ImageProxyAddress' .
>
> On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <gianluca.cec...(a)gmail.com
> > wrote:
>
>> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
>>
>>> You can just replace this value in the DB and change it to the right
>>> FQDN, it is a config value named "ImageProxyAddress". replace "localhost"
>>> with the right address (notice that the port is there too).
>>>
>>> If this will keep happen after users will have the latest version, we
>>> will have to open a bug and fix whatever causes the URL to be "localhost".
>>>
>>>
>> Do you mean through "engine-config" or directly into database?
>> In this second case which is the table involved?
>>
>> Gianluca
>>
>
>
[root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value | version
-----------+-------------------+-----------------+---------
950 | ImageProxyAddress | localhost:54323 | general
(1 row)
engine=# update vdc_options set option_value='ractorshe.mydomain:54323'
where option_name='ImageProxyAddress';
UPDATE 1
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
engine=#
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
systemctl stop ovirt-engine
(otherwise it remained localhost)
systemctl start ovirt-engine
systemctl start ovirt-imageio-proxy
Now transfer is ok.
I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data.
I'm going to connect it to a VM and see if all is ok also from a contents
point of view.
Gianluca
_______________________________________________
Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
7 years, 6 months
ovirt-hosted-engine state transition messages
by Jim Kusznir
Hello:
I find that I often get random-seeming messages. A lot of them mention
"ReintializeFSM", but I also get engine down, engine start, etc.
messages. All the time, nothing appears to be happening on the cluster,
and I rarely can find anything wrong or any trigger/cause. Is this
normal? What causes this (beyond obvious hardware issues / hosts
rebooting)? Most of the time when I get these, my cluster is going along
smoothly, and nothing (not even administrative access) is interrupted.
Could ISP issues cause these messages to be generated?
Thanks!
--Jim
7 years, 9 months
ISCSI storage with multiple nics on same subnet disabled on host activation
by Nelson Lameiras
------=_Part_57353689_1234561196.1496840388734
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Hello,=20
In our oVirt hosts, we are using DELL equallogic SAN with each server conne=
cting to SAN via 2 physical interfaces. Since both interfaces share the sam=
e network (Equalogic limitation) we must patch the linux kernel to to allow=
iSCSI multipath with multiple NICs in the same subnet with sysctl :=20
---------------------------------------------------------------------------=
-----------------=20
net.ipv4.conf.p2p1.arp_ignore=3D1
net.ipv4.conf.p2p1.arp_announce=3D2
net.ipv4.conf.p2p1.rp_filter=3D2
net.ipv4.conf.p2p2.arp_ignore=3D1
net.ipv4.conf.p2p2.arp_announce=3D2
net.ipv4.conf.p2p2.rp_filter=3D2=20
---------------------------------------------------------------------------=
-----------------=20
This works great in most setups, but for a strange reason, on some of our s=
etups, the sysctl configuration is updated by VDSM when activating a host a=
nd the second interface stops working immeadiatly :=20
---------------------------------------------------------------------------=
-----------------=20
vdsm.log=20
2017-06-07 11:51:51,063+0200 INFO (jsonrpc/5) [storage.ISCSI] Setting stri=
ct mode rp_filter for device 'p2p2'. (iscsi:602)
2017-06-07 11:51:51,064+0200 ERROR (jsonrpc/5) [storage.HSM] Could not conn=
ect to storageServer (hsm:2392)
Traceback (most recent call last):
File "/usr/share/vdsm/storage/hsm.py", line 2389, in connectStorageServer
conObj.connect()
File "/usr/share/vdsm/storage/storageServer.py", line 433, in connect
iscsi.addIscsiNode(self._iface, self._target, self._cred)
File "/usr/lib/python2.7/site-packages/vdsm/storage/iscsi.py", line 232, =
in addIscsiNode
iscsiadm.node_login(iface.name, target.address, target.iqn)
File "/usr/lib/python2.7/site-packages/vdsm/storage/iscsiadm.py", line 33=
7, in node_login
raise IscsiNodeError(rc, out, err)=20
---------------------------------------------------------------------------=
-----------------=20
"strict mode" is enforced for second interface, and it no longuer works...=
=20
Which means - at least - that there is no redundancy in case of hardware fa=
illure and this is not acceptable for our production needs.=20
What is really strange is that we have another "twin" site on another geogr=
aphic region with simillar hardware configuration and same oVirt installati=
on, and this problem does not happen.=20
What can be the root cause of this behaviour? How can I correct it?=20
our setup:=20
hostedEngine : Centor 7.3, ovirt 4.1.2=20
3 physical nodes centos 7.3, ovirt 4.1.2=20
SAN DELL Equalogic=20
cordialement, regards,=20
=09Nelson LAMEIRAS=20
Ing=C3=A9nieur Syst=C3=A8mes et R=C3=A9seaux / Systems and Networks enginee=
r=20
Tel: +33 5 32 09 09 70=20
nelson.lameiras(a)lyra-network.com=20
www.lyra-network.com | www.payzen.eu=20
=09
=09
=09
Lyra Network, 109 rue de l'innovation, 31670 Lab=C3=A8ge, FRANCE=20
------=_Part_57353689_1234561196.1496840388734
Content-Type: multipart/related;
boundary="----=_Part_57353690_157338222.1496840388734"
------=_Part_57353690_157338222.1496840388734
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: arial, helvetica, sans-serif; font-s=
ize: 12pt; color: #000000"><div>Hello,<br></div><div><br data-mce-bogus=3D"=
1"></div><div>In our oVirt hosts, we are using DELL equallogic SAN with eac=
h server connecting to SAN via 2 physical interfaces. Since both interfaces=
share the same network (Equalogic limitation) we must patch the linux kern=
el to to allow iSCSI multipath with multiple NICs in the same subnet with s=
ysctl :<br data-mce-bogus=3D"1"></div><div><br data-mce-bogus=3D"1"></div><=
div>-----------------------------------------------------------------------=
---------------------<br data-mce-bogus=3D"1"></div><div><pre>net.ipv4.conf=
.p2p1.arp_ignore=3D1
net.ipv4.conf.p2p1.arp_announce=3D2
net.ipv4.conf.p2p1.rp_filter=3D2
net.ipv4.conf.p2p2.arp_ignore=3D1
net.ipv4.conf.p2p2.arp_announce=3D2
net.ipv4.conf.p2p2.rp_filter=3D2<br><br></pre><p>--------------------------=
------------------------------------------------------------------<br><br><=
/p><p>This works great in most setups, but for a strange reason, on some of=
our setups, the sysctl configuration is updated by VDSM when activating a =
host and the second interface stops working immeadiatly :</p><div>---------=
---------------------------------------------------------------------------=
--------</div><div>vdsm.log<br data-mce-bogus=3D"1"></div><div><pre id=3D"p=
review"><code>2017-06-07 11:51:51,063+0200 INFO (jsonrpc/5) [storage.ISCSI=
] Setting strict mode rp_filter for device 'p2p2'. (iscsi:602)
2017-06-07 11:51:51,064+0200 ERROR (jsonrpc/5) [storage.HSM] Could not conn=
ect to storageServer (hsm:2392)
Traceback (most recent call last):
File "/usr/share/vdsm/storage/hsm.py", line 2389, in connectStorageServer
conObj.connect()
File "/usr/share/vdsm/storage/storageServer.py", line 433, in connect
iscsi.addIscsiNode(self._iface, self._target, self._cred)
File "/usr/lib/python2.7/site-packages/vdsm/storage/iscsi.py", line 232, =
in addIscsiNode
iscsiadm.node_login(iface.name, target.address, target.iqn)
File "/usr/lib/python2.7/site-packages/vdsm/storage/iscsiadm.py", line 33=
7, in node_login
raise IscsiNodeError(rc, out, err)</code></pre><pre><br><br></pre><p st=
yle=3D"margin: 0px;" data-mce-style=3D"margin: 0px;">----------------------=
----------------------------------------------------------------------</p><=
/div></div><div><div><br data-mce-bogus=3D"1"></div><div>"strict mode" is e=
nforced for second interface, and it no longuer works...</div><div>Which me=
ans - at least - that there is no redundancy in case of hardware faillure a=
nd this is not acceptable for our production needs.<br data-mce-bogus=3D"1"=
></div><div><br data-mce-bogus=3D"1"></div><div>What is really strange is t=
hat we have another "twin" site on another geographic region with simillar =
hardware configuration and same oVirt installation, and this problem does n=
ot happen.</div><div><br data-mce-bogus=3D"1"></div><div>What can be the ro=
ot cause of this behaviour? How can I correct it?<br data-mce-bogus=3D"1"><=
/div><div><br data-mce-bogus=3D"1"></div><div>our setup:</div><div>hostedEn=
gine : Centor 7.3, ovirt 4.1.2<br></div><div>3 physical nodes centos 7.3, o=
virt 4.1.2<br data-mce-bogus=3D"1"></div><div>SAN DELL Equalogic<br data-mc=
e-bogus=3D"1"></div></div><div><br data-mce-bogus=3D"1"></div><div data-mar=
ker=3D"__SIG_PRE__"><div>cordialement, regards,</div><div><br data-mce-bogu=
s=3D"1"></div><table style=3D"margin: 0px; table-layout: fixed; border: non=
e; width: 345pt; padding: 0px;" data-mce-style=3D"margin: 0px; table-layout=
: fixed; border: none; width: 345pt; padding: 0px;" width=3D"460" cellspaci=
ng=3D"0" cellpadding=3D"0" border=3D"0"><tbody><tr><td style=3D"margin: 0; =
font-size: 11px; font-family: Arial,sans-serif; color: #2b3c7a; line-height=
: 16px; width: 86.25pt; text-align: left;" data-mce-style=3D"margin: 0; fon=
t-size: 11px; font-family: Arial,sans-serif; color: #2b3c7a; line-height: 1=
6px; width: 86.25pt; text-align: left;" width=3D"115" valign=3D"top"><a hre=
f=3D"https://www.lyra-network.com/" style=3D"border: none; text-decoration:=
none; width: 100%; display: block; clear: both;" data-mce-href=3D"https://=
www.lyra-network.com/" data-mce-style=3D"border: none; text-decoration: non=
e; width: 100%; display: block; clear: both;"><img src=3D"cid:6fa8666d679e1=
8cab5e566228d0ca3519aabec27@zimbra" alt=3D"" data-mce-src=3D"/home/admin@ly=
ra-network.com/corporate-documents/element-signature_logo_lyra_115x94.jpg" =
doc=3D"corporate-documents/element-signature_logo_lyra_115x94.jpg" height=
=3D"94" width=3D"115" border=3D"0"></a><br data-mce-bogus=3D"1"></td><td st=
yle=3D"margin: 0; font-size: 11px; font-family: Arial,sans-serif; color: #2=
b3c7a; line-height: 16px; width: 258.75pt;" data-mce-style=3D"margin: 0; fo=
nt-size: 11px; font-family: Arial,sans-serif; color: #2b3c7a; line-height: =
16px; width: 258.75pt;" width=3D"345" valign=3D"top"><table style=3D"margin=
: 0; width: 258.75pt; table-layout: fixed; border: none;" data-mce-style=3D=
"margin: 0; width: 258.75pt; table-layout: fixed; border: none;" width=3D"3=
45" cellspacing=3D"0" cellpadding=3D"0" border=3D"0"><tbody><tr><td style=
=3D"font-size: 16px; font-family: Arial,sans-serif; color: #2b3c7a; line-he=
ight: 18px; font-weight: bold;" data-mce-style=3D"font-size: 16px; font-fam=
ily: Arial,sans-serif; color: #2b3c7a; line-height: 18px; font-weight: bold=
;">Nelson LAMEIRAS</td></tr><tr><td style=3D"font-family: Arial,sans-serif;=
color: #2b3c7a; font-size: 11px; line-height: 16px;" data-mce-style=3D"fon=
t-family: Arial,sans-serif; color: #2b3c7a; font-size: 11px; line-height: 1=
6px;">Ing=C3=A9nieur Syst=C3=A8mes et R=C3=A9seaux<span style=3D"font-famil=
y: Arial,sans-serif; color: #337ab7; font-size: 11px;" data-mce-style=3D"fo=
nt-family: Arial,sans-serif; color: #337ab7; font-size: 11px;"> / Systems a=
nd Networks engineer</span></td></tr><tr><td style=3D"line-height: 16px; fo=
nt-family: 'Arial',sans-serif; color: #2b3c7a; font-size: 11px;" data-mce-s=
tyle=3D"line-height: 16px; font-family: 'Arial',sans-serif; color: #2b3c7a;=
font-size: 11px;"><span style=3D"font-family: Arial,sans-serif; color: #2b=
3c7a; font-size: 11px;" data-mce-style=3D"font-family: Arial,sans-serif; co=
lor: #2b3c7a; font-size: 11px;">Tel: +33 5 32 09 09 70</span></td></tr><tr>=
<td style=3D"line-height: 16px; font-family: 'Arial',sans-serif; color: #2b=
3c7a; font-size: 11px;" data-mce-style=3D"line-height: 16px; font-family: '=
Arial',sans-serif; color: #2b3c7a; font-size: 11px;"><a href=3D"mailto:nels=
on.lameiras(a)lyra-network.com" style=3D"font-size: 11px; font-family: Arial,=
sans-serif; line-height: 16px; text-decoration: none;" data-mce-href=3D"mai=
lto:nelson.lameiras@lyra-network.com" data-mce-style=3D"font-size: 11px; fo=
nt-family: Arial,sans-serif; line-height: 16px; text-decoration: none;">nel=
son.lameiras(a)lyra-network.com</a><br data-mce-bogus=3D"1"></td></tr><tr><td=
style=3D"line-height: 16px; font-family: 'Arial',sans-serif; color: #2b3c7=
a; font-size: 11px;" data-mce-style=3D"line-height: 16px; font-family: 'Ari=
al',sans-serif; color: #2b3c7a; font-size: 11px;"><a href=3D"https://www.ly=
ra-network.com/" style=3D"font-size: 11px; font-family: Arial,sans-serif; l=
ine-height: 16px; border: none; text-decoration: none;" data-mce-href=3D"ht=
tps://www.lyra-network.com/" data-mce-style=3D"font-size: 11px; font-family=
: Arial,sans-serif; line-height: 16px; border: none; text-decoration: none;=
">www.lyra-network.com</a> <a href=3D"https://payzen.eu" style=3D"font-size=
: 11px; font-family: Arial,sans-serif; line-height: 16px; border: none; tex=
t-decoration: none;" data-mce-href=3D"https://payzen.eu" data-mce-style=3D"=
font-size: 11px; font-family: Arial,sans-serif; line-height: 16px; border: =
none; text-decoration: none;"> | www.payzen.eu</a><br data-mce-bogus=3D"1">=
</td></tr></tbody></table></td></tr></tbody></table><table style=3D"margin:=
0; table-layout: fixed; border: none; width: 345pt;" data-mce-style=3D"mar=
gin: 0; table-layout: fixed; border: none; width: 345pt;" data-mce-selected=
=3D"1" width=3D"460" cellspacing=3D"0" cellpadding=3D"0"><tbody><tr><td sty=
le=3D"margin: 0; font-size: 11px; font-family: Arial,sans-serif; color: #2b=
3c7a; line-height: 16px; width: 24pt; text-align: left;" data-mce-style=3D"=
margin: 0; font-size: 11px; font-family: Arial,sans-serif; color: #2b3c7a; =
line-height: 16px; width: 24pt; text-align: left;" width=3D"32" valign=3D"t=
op"><a href=3D"https://www.youtube.com/channel/UCrVl1CO_Jlu3KbiRH-tQ_vA" st=
yle=3D"border: none; text-decoration: none; margin: 0; float: left; display=
: inline-block; width: 32px;" data-mce-href=3D"https://www.youtube.com/chan=
nel/UCrVl1CO_Jlu3KbiRH-tQ_vA" data-mce-style=3D"border: none; text-decorati=
on: none; margin: 0; float: left; display: inline-block; width: 32px;"><img=
src=3D"cid:2806a89cb9fbba6f879bd3fd54a93b515defd6d2@zimbra" alt=3D"" data-=
mce-src=3D"/home/admin(a)lyra-network.com/corporate-documents/element-signatu=
re_logo_YouTube_32x28.jpg" doc=3D"corporate-documents/element-signature_log=
o_YouTube_32x28.jpg" height=3D"28" width=3D"32" border=3D"0"></a><br data-m=
ce-bogus=3D"1"></td><td style=3D"margin: 0; font-size: 11px; font-family: A=
rial,sans-serif; color: #2b3c7a; line-height: 16px; width: 30.75pt; text-al=
ign: left;" data-mce-style=3D"margin: 0; font-size: 11px; font-family: Aria=
l,sans-serif; color: #2b3c7a; line-height: 16px; width: 30.75pt; text-align=
: left;" width=3D"41" valign=3D"top"><a href=3D"https://www.linkedin.com/co=
mpany/lyra-network_2" style=3D"border: none; text-decoration: none; margin:=
0; float: left; display: inline-block; width: 41px;" data-mce-href=3D"http=
s://www.linkedin.com/company/lyra-network_2" data-mce-style=3D"border: none=
; text-decoration: none; margin: 0; float: left; display: inline-block; wid=
th: 41px;"><img src=3D"cid:878634ba055bb6ae851a7ef4540f754afa3ff86c@zimbra"=
data-mce-src=3D"/home/admin(a)lyra-network.com/corporate-documents/element-s=
ignature_logo_LinkedIn_41x28.jpg" doc=3D"corporate-documents/element-signat=
ure_logo_LinkedIn_41x28.jpg" height=3D"28" width=3D"41" border=3D"0"></a><b=
r data-mce-bogus=3D"1"></td><td style=3D"margin: 0; font-size: 11px; font-f=
amily: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 31.5pt; =
text-align: left;" data-mce-style=3D"margin: 0; font-size: 11px; font-famil=
y: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 31.5pt; text=
-align: left;" width=3D"42" valign=3D"top"><a href=3D"https://twitter.com/L=
yraNetwork" style=3D"border: none; text-decoration: none; margin: 0; float:=
left; display: inline-block; width: 42px;" data-mce-href=3D"https://twitte=
r.com/LyraNetwork" data-mce-style=3D"border: none; text-decoration: none; m=
argin: 0; float: left; display: inline-block; width: 42px;"><img src=3D"cid=
:18a767bbdad6a1133fc4152b03ea78228ce25a14@zimbra" alt=3D"" data-mce-src=3D"=
/home/admin(a)lyra-network.com/corporate-documents/element-signature_logo_Twi=
tter_42x28.jpg" doc=3D"corporate-documents/element-signature_logo_Twitter_4=
2x28.jpg" height=3D"28" width=3D"42" border=3D"0"></a><br data-mce-bogus=3D=
"1"></td><td style=3D"margin: 0; font-size: 11px; font-family: Arial,sans-s=
erif; color: #2b3c7a; line-height: 16px; width: 258.75pt; text-align: left;=
" data-mce-style=3D"margin: 0; font-size: 11px; font-family: Arial,sans-ser=
if; color: #2b3c7a; line-height: 16px; width: 258.75pt; text-align: left;" =
width=3D"345" valign=3D"top"><a href=3D"https://payzen.eu" style=3D"border:=
none; text-decoration: none; margin: 0; float: left; display: inline-block=
; width: 61px;" data-mce-href=3D"https://payzen.eu" data-mce-style=3D"borde=
r: none; text-decoration: none; margin: 0; float: left; display: inline-blo=
ck; width: 61px;"><img src=3D"cid:d3fc119a0aa72bf985c19ca559c993b5b4b54ca3@=
zimbra" alt=3D"" data-mce-src=3D"/home/admin(a)lyra-network.com/corporate-doc=
uments/element-signature_payzen_61x28.jpg" doc=3D"corporate-documents/eleme=
nt-signature_payzen_61x28.jpg" height=3D"28" width=3D"61" border=3D"0"></a>=
<br data-mce-bogus=3D"1"></td></tr></tbody></table><table style=3D"margin: =
0; table-layout: fixed; border: none; width: 345pt;" data-mce-style=3D"marg=
in: 0; table-layout: fixed; border: none; width: 345pt;" width=3D"460" cell=
spacing=3D"0" cellpadding=3D"0"><tbody><tr><td><hr style=3D"background: #29=
3b79 none repeat scroll 0% 0%; width: 100%; height: 4px; color: #293b79; ma=
rgin: 0px;" data-mce-style=3D"background: #293b79 none repeat scroll 0% 0%;=
width: 100%; height: 4px; color: #293b79; margin: 0px;"></td></tr></tbody>=
</table><table style=3D"margin: 0; table-layout: fixed; border: none; width=
: 345pt;" data-mce-style=3D"margin: 0; table-layout: fixed; border: none; w=
idth: 345pt;" data-mce-selected=3D"1" width=3D"460" cellspacing=3D"0" cellp=
adding=3D"0"><tbody><tr><td style=3D"margin: 0; font-size: 11px; font-famil=
y: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 30.75pt; tex=
t-align: left;" data-mce-style=3D"margin: 0; font-size: 11px; font-family: =
Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 30.75pt; text-a=
lign: left;"><div>Lyra Network, 109 rue de l'innovation, 31670 Lab=C3=A8ge,=
FRANCE</div></td></tr></tbody></table><div><br></div></div></div></body></=
html>
------=_Part_57353690_157338222.1496840388734
Content-Type: image/jpeg; name=element-signature_logo_lyra_115x94.jpg
Content-Disposition: attachment;
filename=element-signature_logo_lyra_115x94.jpg
Content-Transfer-Encoding: base64
Content-ID: <6fa8666d679e18cab5e566228d0ca3519aabec27@zimbra>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------=_Part_57353690_157338222.1496840388734
Content-Type: image/jpeg; name=element-signature_logo_YouTube_32x28.jpg
Content-Disposition: attachment;
filename=element-signature_logo_YouTube_32x28.jpg
Content-Transfer-Encoding: base64
Content-ID: <2806a89cb9fbba6f879bd3fd54a93b515defd6d2@zimbra>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------=_Part_57353690_157338222.1496840388734
Content-Type: image/jpeg; name=element-signature_logo_LinkedIn_41x28.jpg
Content-Disposition: attachment;
filename=element-signature_logo_LinkedIn_41x28.jpg
Content-Transfer-Encoding: base64
Content-ID: <878634ba055bb6ae851a7ef4540f754afa3ff86c@zimbra>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------=_Part_57353690_157338222.1496840388734
Content-Type: image/jpeg; name=element-signature_logo_Twitter_42x28.jpg
Content-Disposition: attachment;
filename=element-signature_logo_Twitter_42x28.jpg
Content-Transfer-Encoding: base64
Content-ID: <18a767bbdad6a1133fc4152b03ea78228ce25a14@zimbra>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------=_Part_57353690_157338222.1496840388734
Content-Type: image/jpeg; name=element-signature_payzen_61x28.jpg
Content-Disposition: attachment; filename=element-signature_payzen_61x28.jpg
Content-Transfer-Encoding: base64
Content-ID: <d3fc119a0aa72bf985c19ca559c993b5b4b54ca3@zimbra>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------=_Part_57353690_157338222.1496840388734--
------=_Part_57353689_1234561196.1496840388734--
7 years, 9 months
Fwd: Windows USB Redirection
by Abi Askushi
Hi All,
I have Ovirt 4.1 with 3 nodes on top glusterfs.
I Have 2 VMs: Windows 2016 64bit and Windows 10 64bit
When I attach a USB flash disk to a VM (from host devices) the VM cannot
see the USB drive and report driver issue at device manager (see attached).
This happens with both VMs when tested.
When testing with Windows 7 or Windows XP USB is attached and accessed
normally.
Have you encountered such issue?
I have installed latest guest tools on both VMs.
Many thanx
7 years, 9 months
Failed to create template
by aduckers
I’m running 4.1 with a hosted engine, using FC SAN storage. I’ve uploaded a qcow2 image, then created a VM and attached that image.
When trying to create a template from that VM, we get failures with:
failed: low level image copy failed
VDSM command DeleteImageGroupVDS failed: Image does not exist in domain
failed to create template
What should I be looking at to resolve this? Anyone recognize this issue?
Thanks
7 years, 9 months
Re: [ovirt-users] Access VM Console on a Smart Phone with User Permission
by Tomas Jelinek
On Tue, Jun 27, 2017 at 12:08 PM, Jerome R <jerzkie102030(a)gmail.com> wrote:
> I tried this workaround, I tried to logon the user acct to moVirt with 1
> of the admin permission resources, it works I can access to the VM assigned
> however I'm able to see what Admin can see in the portal though not able to
> perform action. So far that's one of my concern the user should be able to
> see just his/her VM assigned.
>
yes, this is a consequence of using the admin API - you can see all the
entities and do actions only on the ones you have explicit rights to.
Unfortunately, until the https://github.com/oVirt/moVirt/issues/282 is
done, there is nothing better I can offer you.
We can try to give that item a priority, just need to get the current RC
out of the door (hopefully soon).
>
> Thanks,
> Jerome
>
> On Tue, Jun 27, 2017 at 3:20 PM, Tomas Jelinek <tjelinek(a)redhat.com>
> wrote:
>
>>
>>
>> On Tue, Jun 27, 2017 at 10:13 AM, Jerome Roque <jerzkie102030(a)gmail.com>
>> wrote:
>>
>>> Hi Tomas,
>>>
>>> Thanks for your response. What do you mean by "removing the support for
>>> user permissions"? I'm using
>>>
>>
>> The oVirt permission model expects to be told explicitly by one header if
>> the logged in user has some admin permissions or not. In the past the API
>> behaved differently in this two cases so we needed to remove the option to
>> use it without admin permissions.
>>
>> Now the situation is better so we may be able to bring this support back,
>> but it will require some testing.
>>
>>
>>> the latest version of moVirt 1.7.1, and ovirt-engine 4.1.
>>> Is there anyone tried running user role in moVirt?
>>>
>>
>> you will get permission denied from the API if you try to log in with a
>> user which has no admin permission. If you give him any admin permission on
>> any resource, it might work as a workaround.
>>
>>
>>>
>>> Best Regards,
>>> Jerome
>>>
>>> On Tue, Jun 20, 2017 at 5:14 PM, Tomas Jelinek <tjelinek(a)redhat.com>
>>> wrote:
>>>
>>>>
>>>>
>>>> On Fri, Jun 16, 2017 at 6:14 AM, Jerome Roque <jerzkie102030(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Good day oVirt Users,
>>>>>
>>>>> I need some little help. I have a KVM and used oVirt for the
>>>>> management of VMs. What I want is that my client will log on to their
>>>>> account and access their virtual machine using their Smart phone. I tried
>>>>> to install mOvirt and yes can connect to the console of my machine, but it
>>>>> is only accessible for admin console.
>>>>>
>>>>
>>>> moVirt originally worked both with admin and user permissions. We had
>>>> to remove the support for user permissions since the oVirt API did not
>>>> provide all features moVirt needed for user permissions (search for
>>>> example). But the API moved significantly since then (the search works also
>>>> for users now for one) so we can move it back. I have opened an issue about
>>>> it: https://github.com/oVirt/moVirt/issues/282 - we can try to do it
>>>> in next version.
>>>>
>>>>
>>>>> Tried to use web console, it downloaded console.vv but can't open it.
>>>>> By any chance could make this thing possible?
>>>>>
>>>>
>>>> If you want to use a web console for users, I would suggest to try the
>>>> new ovirt-web-ui [1] - you have a link to it from oVirt landing page and
>>>> since 4.1 it is installed by default with oVirt.
>>>>
>>>> The .vv file can not be opened using aSPICE AFAIK - adding Iordan as
>>>> the author of aSPICE to comment on this.
>>>>
>>>> [1]: https://github.com/oVirt/ovirt-web-ui
>>>>
>>>>
>>>>>
>>>>> Thank you,
>>>>> Jerome
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>
>>
>
7 years, 9 months
SQL : last time halted?
by Nicolas Ecarnot
Hello,
I'm trying to find a way to clean up the VMs list of my DCs.
I think some of my users have created VM they're not using anymore, but
it's difficult to sort them out.
In some cases, I can shutdown some of them and wait.
Is there somewhere stored in the db tables the date of the last VM
exctinction?
Thank you.
--
Nicolas ECARNOT
7 years, 9 months
Very poor GlusterFS performance
by Chris Boot
Hi folks,
I have 3x servers in a "hyper-converged" oVirt 4.1.2 + GlusterFS 3.10
configuration. My VMs run off a replica 3 arbiter 1 volume comprised of
6 bricks, which themselves live on two SSDs in each of the servers (one
brick per SSD). The bricks are XFS on LVM thin volumes straight onto the
SSDs. Connectivity is 10G Ethernet.
Performance within the VMs is pretty terrible. I experience very low
throughput and random IO is really bad: it feels like a latency issue.
On my oVirt nodes the SSDs are not generally very busy. The 10G network
seems to run without errors (iperf3 gives bandwidth measurements of >=
9.20 Gbits/sec between the three servers).
To put this into perspective: I was getting better behaviour from NFS4
on a gigabit connection than I am with GlusterFS on 10G: that doesn't
feel right at all.
My volume configuration looks like this:
Volume Name: vmssd
Type: Distributed-Replicate
Volume ID: d5a5ddd1-a140-4e0d-b514-701cfe464853
Status: Started
Snapshot Count: 0
Number of Bricks: 2 x (2 + 1) = 6
Transport-type: tcp
Bricks:
Brick1: ovirt3:/gluster/ssd0_vmssd/brick
Brick2: ovirt1:/gluster/ssd0_vmssd/brick
Brick3: ovirt2:/gluster/ssd0_vmssd/brick (arbiter)
Brick4: ovirt3:/gluster/ssd1_vmssd/brick
Brick5: ovirt1:/gluster/ssd1_vmssd/brick
Brick6: ovirt2:/gluster/ssd1_vmssd/brick (arbiter)
Options Reconfigured:
nfs.disable: on
transport.address-family: inet6
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
performance.low-prio-threads: 32
network.remote-dio: off
cluster.eager-lock: enable
cluster.quorum-type: auto
cluster.server-quorum-type: server
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-max-threads: 8
cluster.shd-wait-qlength: 10000
features.shard: on
user.cifs: off
storage.owner-uid: 36
storage.owner-gid: 36
features.shard-block-size: 128MB
performance.strict-o-direct: on
network.ping-timeout: 30
cluster.granular-entry-heal: enable
I would really appreciate some guidance on this to try to improve things
because at this rate I will need to reconsider using GlusterFS altogether.
Cheers,
Chris
--
Chris Boot
bootc(a)bootc.net
7 years, 9 months
ovirt can't find user
by Fabrice Bacchella
--Apple-Mail=_B78E14EB-413D-4DC1-AC54-F837E05B2CF8
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=us-ascii
I tried to add a user in ovirt, but it's not identified:
2017-06-28 16:48:48,505+02 ERROR =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-22) =
[] External Authentication Failed: Cannot resolve principal =
'rexecutor@internal'
/usr/bin/ovirt-aaa-jdbc-tool user show rexecutor
-- User rexecutor(b1727291-5ad4-4575-b8ec-53bdc9ce4aef) --
Namespace: *
Name: rexecutor
ID: b1727291-5ad4-4575-b8ec-53bdc9ce4aef
Display Name:=20
Email:=20
First Name:=20
Last Name:=20
Department:=20
Title:=20
Description:=20
Account Disabled: false
Account Locked: false
Account Unlocked At: 2017-06-16 13:49:31Z
Account Valid From: 2017-06-15 16:41:14Z
Account Valid To: 2217-06-15 16:41:14Z
Account Without Password: true
Last successful Login At: 1970-01-01 00:00:00Z
Last unsuccessful Login At: 1970-01-01 00:00:00Z
Password Valid To: 2025-08-15 10:30:00Z
It's listed as a known user:
<user =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e" =
id=3D"49a12b6e-de03-4095-b6ed-2c1883f5542e">
<department></department>
=
<domain_entry_id>62313732373239312D356164342D343537352D623865632D353362646=
339636534616566</domain_entry_id>
<email></email>
<last_name></last_name>
<name></name>
<namespace>*</namespace>
<principal>rexecutor</principal>
<user_name>rexecutor@internal-authz</user_name>
<domain href=3D"/ovirt-engine/api/domains/696E7465726E616C2D617574687A" =
id=3D"696E7465726E616C2D617574687A">
<name>internal-authz</name>
</domain>
<permissions =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/permi=
ssions"/>
<roles =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/roles=
"/>
<ssh_public_keys =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/sshpu=
blickeys"/>
<tags =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/tags"=
/>
</user>
My admin domain authentication looks OK:
=
config.datasource.jdbcurl=3Djdbc:postgresql://pgdb:5432/ovirt_engine?sslfa=
ctory=3Dorg.postgresql.ssl.NonValidatingFactory
config.datasource.dbuser=3Dovirt
config.datasource.dbpassword=3DXXX
config.datasource.jdbcdriver=3Dorg.postgresql.Driver
config.datasource.schemaname=3Daaa_jdbc
It tried to increase org.ovirt.engine.core.sso.utils debug log level by =
modifying =
/usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.xml.in
diff ovirt-engine.xml.in*
201,204d200
< <logger category=3D"org.ovirt.engine.core.sso.utils">
< <level name=3D"ALL"/>
< </logger>
<=20
I just got in the log:
2017-06-28 17:17:09,404+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NonInteractiveAuth] (default task-7) [] =
Performing Negotiate Auth
2017-06-28 17:17:09,404+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
Performing external authentication
2017-06-28 17:17:09,410+02 ERROR =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
External Authentication Failed: Cannot resolve principal =
'rexecutor@internal'
2017-06-28 17:17:09,410+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
External Authentication Failed: Class: class =
org.ovirt.engine.core.extensions.mgr.ExtensionInvokeCommandFailedException=
Input:
{Extkey[name=3DEXTENSION_INVOKE_COMMAND;type=3Dclass =
org.ovirt.engine.api.extensions.ExtUUID;uuid=3DEXTENSION_INVOKE_COMMAND[48=
5778ab-bede-4f1a-b823-77b262a2f28d];]=3DAAA_AUTHZ_FETCH_PRINCIPAL_RECORD[5=
a5bf9bb-9336-4376-a823-26efe1ba26df], =
Extkey[name=3DAAA_AUTHZ_QUERY_FLAGS;type=3Dclass =
java.lang.Integer;uuid=3DAAA_AUTHZ_QUERY_FLAGS[97d226e9-8d87-49a0-9a7f-af6=
89320907b];]=3D3, Extkey[name=3DEXTENSION_INVOKE_CONTEXT;type=3Dclass =
org.ovirt.engine.api.extensions.ExtMap;uuid=3DEXTENSION_INVOKE_CONTEXT[886=
d2ebb-312a-49ae-9cc3-e1f849834b7d];]=3D{Extkey[name=3DAAA_AUTHZ_AVAILABLE_=
NAMESPACES;type=3Dinterface =
java.util.Collection;uuid=3DAAA_AUTHZ_AVAILABLE_NAMESPACES[6dffa34c-955f-4=
86a-bd35-0a272b45a711];]=3D[DC=3DXXX], =
Extkey[name=3DEXTENSION_LICENSE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_LICENSE[8a61ad65-054c-4e31-9c6d-1ca4d60a=
4c18];]=3DASL 2.0, Extkey[name=3DEXTENSION_GLOBAL_CONTEXT;type=3Dclass =
org.ovirt.engine.api.extensions.ExtMap;uuid=3DEXTENSION_GLOBAL_CONTEXT[979=
9e72f-7af6-4cf1-bf08-297bc8903676];]=3D*skip*, =
Extkey[name=3DEXTENSION_NAME;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_NAME[651381d3-f54f-4547-bf28-b0b01a10318=
4];]=3Dovirt-engine-extension-aaa-ldap.authz, =
Extkey[name=3DEXTENSION_MANAGER_TRACE_LOG;type=3Dinterface =
org.slf4j.Logger;uuid=3DEXTENSION_MANAGER_TRACE_LOG[863db666-3ea7-4751-969=
5-918a3197ad83];]=3Dorg.slf4j.impl.Slf4jLogger(org.ovirt.engine.core.exten=
sions.mgr.ExtensionsManager.trace.ovirt-engine-extension-aaa-ldap.authz.XX=
X-authz), =
Extkey[name=3DEXTENSION_CONFIGURATION_SENSITIVE_KEYS;type=3Dinterface =
java.util.Collection;uuid=3DEXTENSION_CONFIGURATION_SENSITIVE_KEYS[a456efa=
1-73ff-4204-9f9b-ebff01e35263];]=3D[], =
Extkey[name=3DEXTENSION_VERSION;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_VERSION[fe35f6a8-8239-4bdb-ab1a-af9f779c=
e68c];]=3D1.3.1, Extkey[name=3DEXTENSION_PROVIDES;type=3Dinterface =
java.util.Collection;uuid=3DEXTENSION_PROVIDES[8cf373a6-65b5-4594-b828-0e2=
75087de91];]=3D[org.ovirt.engine.api.extensions.aaa.Authz], =
Extkey[name=3DEXTENSION_AUTHOR;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_AUTHOR[ef242f7a-2dad-4bc5-9aad-e07018b7f=
bcc];]=3DThe oVirt Project, Extkey[name=3DEXTENSION_LOCALE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_LOCALE[0780b112-0ce0-404a-b85e-8765d778b=
b29];]=3Den_US, Extkey[name=3DEXTENSION_CONFIGURATION_FILE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_CONFIGURATION_FILE[4fb0ffd3-983c-4f3f-98=
ff-9660bd67af6a];]=3D/etc/ovirt-engine/extensions.d/XXXX-authz.properties,=
Extkey[name=3DEXTENSION_HOME_URL;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_HOME_URL[4ad7a2f4-f969-42d4-b399-72d192e=
18304];]=3Dhttp://www.ovirt.org, =
Extkey[name=3DEXTENSION_CONFIGURATION;type=3Dclass =
java.util.Properties;uuid=3DEXTENSION_CONFIGURATION[2d48ab72-f0a1-4312-b4a=
e-5068a226b0fc];]=3D***, =
Extkey[name=3DEXTENSION_INTERFACE_VERSION_MAX;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_INTERFACE_VERSION_MAX[f4cff49f-2717-490=
1-8ee9-df362446e3e7];]=3D0, =
Extkey[name=3DAAA_AUTHZ_QUERY_MAX_FILTER_SIZE;type=3Dclass =
java.lang.Integer;uuid=3DAAA_AUTHZ_QUERY_MAX_FILTER_SIZE[2eb1f541-0f65-44a=
1-a6e3-014e247595f5];]=3D50, =
Extkey[name=3DEXTENSION_INTERFACE_VERSION_MIN;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_INTERFACE_VERSION_MIN[2b84fc91-305b-497=
b-a1d7-d961b9d2ce0b];]=3D0, =
Extkey[name=3DEXTENSION_INSTANCE_NAME;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_INSTANCE_NAME[65c67ff6-aeca-4bd5-a245-86=
74327f011b];]=3DXXXX-authz, =
Extkey[name=3DEXTENSION_BUILD_INTERFACE_VERSION;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_BUILD_INTERFACE_VERSION[cb479e5a-4b23-4=
6f8-aed3-56a4747a8ab7];]=3D0, Extkey[name=3DEXTENSION_NOTES;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_NOTES[2da5ad7e-185a-4584-aaff-97f66978e4=
ea];]=3DDisplay name: =
ovirt-engine-extension-aaa-ldap-1.3.1-1.el7.centos}, =
Extkey[name=3DAAA_AUTHN_AUTH_RECORD;type=3Dclass =
org.ovirt.engine.api.extensions.ExtMap;uuid=3DAAA_AUTHN_AUTH_RECORD[e94621=
68-b53b-44ac-9af5-f25e1697173e];]=3D{Extkey[name=3DAAA_AUTHN_AUTH_RECORD_P=
RINCIPAL;type=3Dclass =
java.lang.String;uuid=3DAAA_AUTHN_AUTH_RECORD_PRINCIPAL[c3498f07-11fe-464c=
-958c-8bd7490b119a];]=3Drexecutor@internal}}
Output:
{Extkey[name=3DEXTENSION_INVOKE_MESSAGE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_INVOKE_MESSAGE[b7b053de-dc73-4bf7-9d26-b=
8bdb72f5893];]=3DCannot resolve principal 'rexecutor@internal', =
Extkey[name=3DEXTENSION_INVOKE_RESULT;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_INVOKE_RESULT[0909d91d-8bde-40fb-b6c0-0=
99c772ddd4e];]=3D2}
at =
org.ovirt.engine.core.extensions.mgr.ExtensionProxy.invoke(ExtensionProxy.=
java:95) [extensions-manager.jar:]
at =
org.ovirt.engine.core.extensions.mgr.ExtensionProxy.invoke(ExtensionProxy.=
java:109) [extensions-manager.jar:]
at =
org.ovirt.engine.core.sso.utils.NegotiateAuthUtils.doAuth(NegotiateAuthUti=
ls.java:122) [enginesso.jar:]
at =
org.ovirt.engine.core.sso.utils.NegotiateAuthUtils.doAuth(NegotiateAuthUti=
ls.java:68) [enginesso.jar:]
at =
org.ovirt.engine.core.sso.utils.NonInteractiveAuth$2.doAuth(NonInteractive=
Auth.java:51) [enginesso.jar:]
at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.issueTokenUsingHttpHe=
aders(OAuthTokenServlet.java:183) [enginesso.jar:]
at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.service(OAuthTokenSer=
vlet.java:72) [enginesso.jar:]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) =
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at =
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.j=
ava:85) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:129) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java=
:73) [branding.jar:]
at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.jav=
a:66) [utils.jar:]
at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.jav=
a:94) [utils.jar:]
at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.jav=
a:84) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleReq=
uest(ServletSecurityRoleHandler.java:62) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(Servl=
etDispatchingHandler.java:36) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.=
handleRequest(SecurityContextAssociationHandler.java:78)
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.han=
dleRequest(SSLInformationAssociationHandler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.han=
dleRequest(ServletAuthenticationCallHandler.java:57) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AuthenticationConstraintHandler.handleReques=
t(AuthenticationConstraintHandler.java:53) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest=
(AbstractConfidentialityHandler.java:46) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHand=
ler.handleRequest(ServletConfidentialityConstraintHandler.java:64) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.han=
dleRequest(ServletSecurityConstraintHandler.java:59) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleReques=
t(AuthenticationMechanismsHandler.java:60) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.ha=
ndleRequest(CachedAuthenticatedSessionHandler.java:77) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(No=
tificationReceiverHandler.java:50) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.ha=
ndleRequest(AbstractSecurityContextAssociationHandler.java:43) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRe=
quest(JACCContextIdHandler.java:61)
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(Serv=
letInitialHandler.java:292) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.access$100(ServletIniti=
alHandler.java:81) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:138) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:135) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call(Ser=
vletRequestContextThreadSetupAction.java:48) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call(ContextClass=
LoaderSetupAction.java:43) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(Servlet=
InitialHandler.java:272) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletIniti=
alHandler.java:81) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(Servlet=
InitialHandler.java:104) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:805) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:=
1142) [rt.jar:1.8.0_121]
at =
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java=
:617) [rt.jar:1.8.0_121]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_121]
2017-06-28 17:17:09,414+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
External Authentication result: false
2017-06-28 17:17:09,414+02 ERROR =
[org.ovirt.engine.core.sso.utils.SsoUtils] (default task-7) [] =
OAuthException access_denied: Cannot authenticate user Authentication =
failed..
2017-06-28 17:17:09,414+02 DEBUG =
[org.ovirt.engine.core.sso.utils.SsoUtils] (default task-7) [] =
Exception: org.ovirt.engine.core.sso.utils.OAuthException: Cannot =
authenticate user Authentication failed..
at =
org.ovirt.engine.core.sso.utils.SsoUtils.sendJsonDataWithMessage(SsoUtils.=
java:569) [enginesso.jar:]
at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.service(OAuthTokenSer=
vlet.java:81) [enginesso.jar:]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) =
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at =
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.j=
ava:85) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:129) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java=
:73) [branding.jar:]
at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.jav=
a:66) [utils.jar:]
at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.jav=
a:94) [utils.jar:]
at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.jav=
a:84) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleReq=
uest(ServletSecurityRoleHandler.java:62) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(Servl=
etDispatchingHandler.java:36) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.=
handleRequest(SecurityContextAssociationHandler.java:78)
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.han=
dleRequest(SSLInformationAssociationHandler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.han=
dleRequest(ServletAuthenticationCallHandler.java:57) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AuthenticationConstraintHandler.handleReques=
t(AuthenticationConstraintHandler.java:53) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest=
(AbstractConfidentialityHandler.java:46) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHand=
ler.handleRequest(ServletConfidentialityConstraintHandler.java:64) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.han=
dleRequest(ServletSecurityConstraintHandler.java:59) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleReques=
t(AuthenticationMechanismsHandler.java:60) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.ha=
ndleRequest(CachedAuthenticatedSessionHandler.java:77) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(No=
tificationReceiverHandler.java:50) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.ha=
ndleRequest(AbstractSecurityContextAssociationHandler.java:43) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRe=
quest(JACCContextIdHandler.java:61)
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(Serv=
letInitialHandler.java:292) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.access$100(ServletIniti=
alHandler.java:81) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:138) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:135) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call(Ser=
vletRequestContextThreadSetupAction.java:48) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call(ContextClass=
LoaderSetupAction.java:43) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(Servlet=
InitialHandler.java:272) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletIniti=
alHandler.java:81) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(Servlet=
InitialHandler.java:104) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:805) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]
at =
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:=
1142) [rt.jar:1.8.0_121]
at =
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java=
:617) [rt.jar:1.8.0_121]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_121]
Caused by: org.ovirt.engine.core.sso.utils.AuthenticationException: =
Cannot authenticate user Authentication failed..
at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.issueTokenUsingHttpHe=
aders(OAuthTokenServlet.java:214) [enginesso.jar:]
at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.service(OAuthTokenSer=
vlet.java:72) [enginesso.jar:]
... 50 more
2017-06-28 17:17:09,419+02 TRACE =
[org.ovirt.engine.core.sso.utils.SsoUtils] (default task-7) [] Sending =
json data {"error_code":"access_denied","error":"Cannot authenticate =
user Authentication failed.."}
--Apple-Mail=_B78E14EB-413D-4DC1-AC54-F837E05B2CF8
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=us-ascii
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html =
charset=3Dus-ascii"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" =
class=3D"">I tried to add a user in ovirt, but it's not identified:<div =
class=3D""><div style=3D"margin: 0px; font-size: 11px; line-height: =
normal; font-family: Menlo;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">2017-06-28 16:48:48,505+02 ERROR =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-22) =
[] External Authentication Failed: Cannot resolve principal =
'rexecutor@internal'</span></div></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><br =
class=3D""></span></div><div class=3D""><br class=3D""><div =
class=3D""><div style=3D"margin: 0px; font-size: 11px; line-height: =
normal; font-family: Menlo;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">/usr/bin/ovirt-aaa-jdbc-tool user show =
rexecutor</span></div><div style=3D"margin: 0px; font-size: 11px; =
line-height: normal; font-family: Menlo;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">-- User =
rexecutor(b1727291-5ad4-4575-b8ec-53bdc9ce4aef) --</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">Namespace: *</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">Name: rexecutor</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">ID: =
b1727291-5ad4-4575-b8ec-53bdc9ce4aef</span></div><div style=3D"margin: =
0px; font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Display Name: </span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Email: </span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">First Name: </span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Last Name: </span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Department: </span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Title: </span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Description: </span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Account Disabled: false</span></div><div style=3D"margin: =
0px; font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Account Locked: false</span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Account Unlocked At: 2017-06-16 13:49:31Z</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">Account Valid From: 2017-06-15 =
16:41:14Z</span></div><div style=3D"margin: 0px; font-size: 11px; =
line-height: normal; font-family: Menlo;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Account =
Valid To: 2217-06-15 16:41:14Z</span></div><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Account Without Password: true</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">Last successful Login At: 1970-01-01 =
00:00:00Z</span></div><div style=3D"margin: 0px; font-size: 11px; =
line-height: normal; font-family: Menlo;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Last =
unsuccessful Login At: 1970-01-01 00:00:00Z</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">Password Valid To: 2025-08-15 =
10:30:00Z</span></div></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><br =
class=3D""></span></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">It's =
listed as a known user:</span></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><div style=3D"margin: 0px; line-height: normal;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D""><user =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e" =
id=3D"49a12b6e-de03-4095-b6ed-2c1883f5542e"></span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<department></department></span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<domain_entry_id>62313732373239312D356164342D343537352D623865632D353=
362646339636534616566</domain_entry_id></span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<email></email></span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""> =
<last_name></last_name></span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<name></name></span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""> =
<namespace>*</namespace></span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<principal>rexecutor</principal></span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<user_name>rexecutor@internal-authz</user_name></span></div><d=
iv style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<domain href=3D"/ovirt-engine/api/domains/696E7465726E616C2D617574687A"=
id=3D"696E7465726E616C2D617574687A"></span></div><div style=3D"margin:=
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
<name>internal-authz</name></span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> =
</domain></span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""> <permissions =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/permi=
ssions"/></span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""> <roles =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/roles=
"/></span></div><div style=3D"margin: 0px; line-height: normal;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D""> <ssh_public_keys =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/sshpu=
blickeys"/></span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""> <tags =
href=3D"/ovirt-engine/api/users/49a12b6e-de03-4095-b6ed-2c1883f5542e/tags"=
/></span></div><div style=3D"margin: 0px; line-height: normal;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D""></user></span></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><br =
class=3D""></span></div></div><div class=3D"">My admin domain =
authentication looks OK:</div><div class=3D""><div style=3D"margin: 0px; =
font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">config.datasource.jdbcurl=3Djdbc:postgresql://pgdb:5432/ovirt_e=
ngine?sslfactory=3Dorg.postgresql.ssl.NonValidatingFactory</span></div><di=
v style=3D"margin: 0px; font-size: 11px; line-height: normal; =
font-family: Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" =
class=3D"">config.datasource.dbuser=3Dovirt</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" =
class=3D"">config.datasource.dbpassword=3DXXX</span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" =
class=3D"">config.datasource.jdbcdriver=3Dorg.postgresql.Driver</span></di=
v><div style=3D"margin: 0px; font-size: 11px; line-height: normal; =
font-family: Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" =
class=3D"">config.datasource.schemaname=3Daaa_jdbc</span></div></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><br class=3D""></span></div><div =
style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: =
Menlo;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">It tried to =
increase </span>org.ovirt.engine.core.sso.utils debug log level by =
modifying =
/usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.xml.in</div><di=
v style=3D"margin: 0px; font-size: 11px; line-height: normal; =
font-family: Menlo;" class=3D""><br class=3D""></div><div style=3D"margin:=
0px; font-size: 11px; line-height: normal; font-family: Menlo;" =
class=3D""><div style=3D"margin: 0px; line-height: normal;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">diff ovirt-engine.xml.in*</span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">201,204d200</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">< <logger =
category=3D"org.ovirt.engine.core.sso.utils"></span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">< =
<level name=3D"ALL"/></span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">< =
</logger></span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">< </span></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><br =
class=3D""></span></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">I just =
got in the log:</span></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">2017-06-28 17:17:09,404+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NonInteractiveAuth] (default task-7) [] =
Performing Negotiate Auth</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">2017-06-28 17:17:09,404+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
Performing external authentication</span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">2017-06-28 17:17:09,410+02 ERROR =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
External Authentication Failed: Cannot resolve principal =
'rexecutor@internal'</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">2017-06-28 17:17:09,410+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
External Authentication Failed: Class: class =
org.ovirt.engine.core.extensions.mgr.ExtensionInvokeCommandFailedException=
</span></div><div style=3D"margin: 0px; line-height: normal;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Input:</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" =
class=3D"">{Extkey[name=3DEXTENSION_INVOKE_COMMAND;type=3Dclass =
org.ovirt.engine.api.extensions.ExtUUID;uuid=3DEXTENSION_INVOKE_COMMAND[48=
5778ab-bede-4f1a-b823-77b262a2f28d];]=3DAAA_AUTHZ_FETCH_PRINCIPAL_RECORD[5=
a5bf9bb-9336-4376-a823-26efe1ba26df], =
Extkey[name=3DAAA_AUTHZ_QUERY_FLAGS;type=3Dclass =
java.lang.Integer;uuid=3DAAA_AUTHZ_QUERY_FLAGS[97d226e9-8d87-49a0-9a7f-af6=
89320907b];]=3D3, Extkey[name=3DEXTENSION_INVOKE_CONTEXT;type=3Dclass =
org.ovirt.engine.api.extensions.ExtMap;uuid=3DEXTENSION_INVOKE_CONTEXT[886=
d2ebb-312a-49ae-9cc3-e1f849834b7d];]=3D{Extkey[name=3DAAA_AUTHZ_AVAILABLE_=
NAMESPACES;type=3Dinterface =
java.util.Collection;uuid=3DAAA_AUTHZ_AVAILABLE_NAMESPACES[6dffa34c-955f-4=
86a-bd35-0a272b45a711];]=3D[DC=3DXXX], =
Extkey[name=3DEXTENSION_LICENSE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_LICENSE[8a61ad65-054c-4e31-9c6d-1ca4d60a=
4c18];]=3DASL 2.0, Extkey[name=3DEXTENSION_GLOBAL_CONTEXT;type=3Dclass =
org.ovirt.engine.api.extensions.ExtMap;uuid=3DEXTENSION_GLOBAL_CONTEXT[979=
9e72f-7af6-4cf1-bf08-297bc8903676];]=3D*skip*, =
Extkey[name=3DEXTENSION_NAME;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_NAME[651381d3-f54f-4547-bf28-b0b01a10318=
4];]=3Dovirt-engine-extension-aaa-ldap.authz, =
Extkey[name=3DEXTENSION_MANAGER_TRACE_LOG;type=3Dinterface =
org.slf4j.Logger;uuid=3DEXTENSION_MANAGER_TRACE_LOG[863db666-3ea7-4751-969=
5-918a3197ad83];]=3Dorg.slf4j.impl.Slf4jLogger(org.ovirt.engine.core.exten=
sions.mgr.ExtensionsManager.trace.ovirt-engine-extension-aaa-ldap.authz.XX=
X-authz), =
Extkey[name=3DEXTENSION_CONFIGURATION_SENSITIVE_KEYS;type=3Dinterface =
java.util.Collection;uuid=3DEXTENSION_CONFIGURATION_SENSITIVE_KEYS[a456efa=
1-73ff-4204-9f9b-ebff01e35263];]=3D[], =
Extkey[name=3DEXTENSION_VERSION;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_VERSION[fe35f6a8-8239-4bdb-ab1a-af9f779c=
e68c];]=3D1.3.1, Extkey[name=3DEXTENSION_PROVIDES;type=3Dinterface =
java.util.Collection;uuid=3DEXTENSION_PROVIDES[8cf373a6-65b5-4594-b828-0e2=
75087de91];]=3D[org.ovirt.engine.api.extensions.aaa.Authz], =
Extkey[name=3DEXTENSION_AUTHOR;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_AUTHOR[ef242f7a-2dad-4bc5-9aad-e07018b7f=
bcc];]=3DThe oVirt Project, Extkey[name=3DEXTENSION_LOCALE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_LOCALE[0780b112-0ce0-404a-b85e-8765d778b=
b29];]=3Den_US, Extkey[name=3DEXTENSION_CONFIGURATION_FILE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_CONFIGURATION_FILE[4fb0ffd3-983c-4f3f-98=
ff-9660bd67af6a];]=3D/etc/ovirt-engine/extensions.d/XXXX-authz.properties,=
Extkey[name=3DEXTENSION_HOME_URL;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_HOME_URL[4ad7a2f4-f969-42d4-b399-72d192e=
18304];]=3D<a href=3D"http://www.ovirt.org" =
class=3D"">http://www.ovirt.org</a>, =
Extkey[name=3DEXTENSION_CONFIGURATION;type=3Dclass =
java.util.Properties;uuid=3DEXTENSION_CONFIGURATION[2d48ab72-f0a1-4312-b4a=
e-5068a226b0fc];]=3D***, =
Extkey[name=3DEXTENSION_INTERFACE_VERSION_MAX;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_INTERFACE_VERSION_MAX[f4cff49f-2717-490=
1-8ee9-df362446e3e7];]=3D0, =
Extkey[name=3DAAA_AUTHZ_QUERY_MAX_FILTER_SIZE;type=3Dclass =
java.lang.Integer;uuid=3DAAA_AUTHZ_QUERY_MAX_FILTER_SIZE[2eb1f541-0f65-44a=
1-a6e3-014e247595f5];]=3D50, =
Extkey[name=3DEXTENSION_INTERFACE_VERSION_MIN;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_INTERFACE_VERSION_MIN[2b84fc91-305b-497=
b-a1d7-d961b9d2ce0b];]=3D0, =
Extkey[name=3DEXTENSION_INSTANCE_NAME;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_INSTANCE_NAME[65c67ff6-aeca-4bd5-a245-86=
74327f011b];]=3DXXXX-authz, =
Extkey[name=3DEXTENSION_BUILD_INTERFACE_VERSION;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_BUILD_INTERFACE_VERSION[cb479e5a-4b23-4=
6f8-aed3-56a4747a8ab7];]=3D0, Extkey[name=3DEXTENSION_NOTES;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_NOTES[2da5ad7e-185a-4584-aaff-97f66978e4=
ea];]=3DDisplay name: =
ovirt-engine-extension-aaa-ldap-1.3.1-1.el7.centos}, =
Extkey[name=3DAAA_AUTHN_AUTH_RECORD;type=3Dclass =
org.ovirt.engine.api.extensions.ExtMap;uuid=3DAAA_AUTHN_AUTH_RECORD[e94621=
68-b53b-44ac-9af5-f25e1697173e];]=3D{Extkey[name=3DAAA_AUTHN_AUTH_RECORD_P=
RINCIPAL;type=3Dclass =
java.lang.String;uuid=3DAAA_AUTHN_AUTH_RECORD_PRINCIPAL[c3498f07-11fe-464c=
-958c-8bd7490b119a];]=3Drexecutor@internal}}</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">Output:</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" =
class=3D"">{Extkey[name=3DEXTENSION_INVOKE_MESSAGE;type=3Dclass =
java.lang.String;uuid=3DEXTENSION_INVOKE_MESSAGE[b7b053de-dc73-4bf7-9d26-b=
8bdb72f5893];]=3DCannot resolve principal 'rexecutor@internal', =
Extkey[name=3DEXTENSION_INVOKE_RESULT;type=3Dclass =
java.lang.Integer;uuid=3DEXTENSION_INVOKE_RESULT[0909d91d-8bde-40fb-b6c0-0=
99c772ddd4e];]=3D2}</span></div><div style=3D"margin: 0px; line-height: =
normal; min-height: 13px;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.extensions.mgr.ExtensionProxy.invoke(ExtensionProxy.=
java:95) [extensions-manager.jar:]</span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.extensions.mgr.ExtensionProxy.invoke(ExtensionProxy.=
java:109) [extensions-manager.jar:]</span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.utils.NegotiateAuthUtils.doAuth(NegotiateAuthUti=
ls.java:122) [enginesso.jar:]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.utils.NegotiateAuthUtils.doAuth(NegotiateAuthUti=
ls.java:68) [enginesso.jar:]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.utils.NonInteractiveAuth$2.doAuth(NonInteractive=
Auth.java:51) [enginesso.jar:]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.issueTokenUsingHttpHe=
aders(OAuthTokenServlet.java:183) [enginesso.jar:]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.service(OAuthTokenSer=
vlet.java:72) [enginesso.jar:]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
javax.servlet.http.HttpServlet.service(HttpServlet.java:790) =
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.j=
ava:85) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:129) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java=
:73) [branding.jar:]</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.jav=
a:66) [utils.jar:]</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.jav=
a:94) [utils.jar:]</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.jav=
a:84) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleReq=
uest(ServletSecurityRoleHandler.java:62) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(Servl=
etDispatchingHandler.java:36) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.=
handleRequest(SecurityContextAssociationHandler.java:78)</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.han=
dleRequest(SSLInformationAssociationHandler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.han=
dleRequest(ServletAuthenticationCallHandler.java:57) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AuthenticationConstraintHandler.handleReques=
t(AuthenticationConstraintHandler.java:53) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest=
(AbstractConfidentialityHandler.java:46) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHand=
ler.handleRequest(ServletConfidentialityConstraintHandler.java:64) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.han=
dleRequest(ServletSecurityConstraintHandler.java:59) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleReques=
t(AuthenticationMechanismsHandler.java:60) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.ha=
ndleRequest(CachedAuthenticatedSessionHandler.java:77) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(No=
tificationReceiverHandler.java:50) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.ha=
ndleRequest(AbstractSecurityContextAssociationHandler.java:43) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRe=
quest(JACCContextIdHandler.java:61)</span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(Serv=
letInitialHandler.java:292) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.access$100(ServletIniti=
alHandler.java:81) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:138) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:135) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call(Ser=
vletRequestContextThreadSetupAction.java:48) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call(ContextClass=
LoaderSetupAction.java:43) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(Servlet=
InitialHandler.java:272) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletIniti=
alHandler.java:81) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(Servlet=
InitialHandler.java:104) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:805) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:=
1142) [rt.jar:1.8.0_121]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java=
:617) [rt.jar:1.8.0_121]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
java.lang.Thread.run(Thread.java:745) =
[rt.jar:1.8.0_121]</span></div><div style=3D"margin: 0px; line-height: =
normal; min-height: 13px;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">2017-06-28 17:17:09,414+02 DEBUG =
[org.ovirt.engine.core.sso.utils.NegotiateAuthUtils] (default task-7) [] =
External Authentication result: false</span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">2017-06-28 17:17:09,414+02 ERROR =
[org.ovirt.engine.core.sso.utils.SsoUtils] (default task-7) [] =
OAuthException access_denied: Cannot authenticate user Authentication =
failed..</span></div><div style=3D"margin: 0px; line-height: normal;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D"">2017-06-28 17:17:09,414+02 DEBUG =
[org.ovirt.engine.core.sso.utils.SsoUtils] (default task-7) [] =
Exception: org.ovirt.engine.core.sso.utils.OAuthException: Cannot =
authenticate user Authentication failed..</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.utils.SsoUtils.sendJsonDataWithMessage(SsoUtils.=
java:569) [enginesso.jar:]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.service(OAuthTokenSer=
vlet.java:81) [enginesso.jar:]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
javax.servlet.http.HttpServlet.service(HttpServlet.java:790) =
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.j=
ava:85) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:129) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java=
:73) [branding.jar:]</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.jav=
a:66) [utils.jar:]</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.jav=
a:94) [utils.jar:]</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(Filter=
Handler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.jav=
a:84) [undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleReq=
uest(ServletSecurityRoleHandler.java:62) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(Servl=
etDispatchingHandler.java:36) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.=
handleRequest(SecurityContextAssociationHandler.java:78)</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.han=
dleRequest(SSLInformationAssociationHandler.java:131) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.han=
dleRequest(ServletAuthenticationCallHandler.java:57) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AuthenticationConstraintHandler.handleReques=
t(AuthenticationConstraintHandler.java:53) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest=
(AbstractConfidentialityHandler.java:46) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHand=
ler.handleRequest(ServletConfidentialityConstraintHandler.java:64) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.han=
dleRequest(ServletSecurityConstraintHandler.java:59) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleReques=
t(AuthenticationMechanismsHandler.java:60) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.ha=
ndleRequest(CachedAuthenticatedSessionHandler.java:77) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(No=
tificationReceiverHandler.java:50) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.ha=
ndleRequest(AbstractSecurityContextAssociationHandler.java:43) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRe=
quest(JACCContextIdHandler.java:61)</span></div><div style=3D"margin: =
0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandle=
r.java:43) [undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(Serv=
letInitialHandler.java:292) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.access$100(ServletIniti=
alHandler.java:81) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:138) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHa=
ndler.java:135) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call(Ser=
vletRequestContextThreadSetupAction.java:48) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call(ContextClass=
LoaderSetupAction.java:43) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThread=
SetupActionWrapper.java:44) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(Servlet=
InitialHandler.java:272) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletIniti=
alHandler.java:81) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(Servlet=
InitialHandler.java:104) =
[undertow-servlet-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:805) =
[undertow-core-1.4.0.Final.jar:1.4.0.Final]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:=
1142) [rt.jar:1.8.0_121]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java=
:617) [rt.jar:1.8.0_121]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>at =
java.lang.Thread.run(Thread.java:745) =
[rt.jar:1.8.0_121]</span></div><div style=3D"margin: 0px; line-height: =
normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">Caused by: =
org.ovirt.engine.core.sso.utils.AuthenticationException: Cannot =
authenticate user Authentication failed..</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.issueTokenUsingHttpHe=
aders(OAuthTokenServlet.java:214) [enginesso.jar:]</span></div><div =
style=3D"margin: 0px; line-height: normal;" class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><span =
class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>at =
org.ovirt.engine.core.sso.servlets.OAuthTokenServlet.service(OAuthTokenSer=
vlet.java:72) [enginesso.jar:]</span></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D""><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>... 50 more</span></div><div =
style=3D"margin: 0px; line-height: normal; min-height: 13px;" =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; =
line-height: normal;" class=3D""><span style=3D"font-variant-ligatures: =
no-common-ligatures" class=3D"">2017-06-28 17:17:09,419+02 TRACE =
[org.ovirt.engine.core.sso.utils.SsoUtils] (default task-7) [] Sending =
json data {"error_code":"access_denied","error":"Cannot authenticate =
user Authentication failed.."}</span></div></span></div></div><div =
class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" =
class=3D""><br class=3D""></span></div><div class=3D""><span =
style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><br =
class=3D""></span></div></span></div></div></body></html>=
--Apple-Mail=_B78E14EB-413D-4DC1-AC54-F837E05B2CF8--
7 years, 9 months
Cloning VM on NFS Leads to Locked Disks
by Charles Tassell
Hi Everyone,
I'm having some issues with my oVirt 4.1 (fully updated to latest
release as of yesterday) cluster. When I clone a VM the disks of both
the original and the clone stay in the locked state, and the only way I
can resolve it is to go into the database on the engine and run "update
images set imagestatus=1 where imagestatus=2;"
I'm using NFS4 as a datastore and the disks seem to copy fine (file
sizes match and everything), but the locking worries me. To clone the
VM I just shut the source VM down and then right click on it and select
"Clone"
I've attached the full VDSM log from my last attempt, but here is the
excerpt of the lines just referencing the two disks
(d73206ed-89ba-48a9-82ff-c107c1af60f0 is the original VMs disk and
670a7b20-fecd-45c6-af5c-3c7b98258224 is the clone.)
2017-05-10 11:36:20,120-0300 INFO (jsonrpc/2) [dispatcher] Run and
protect: copyImage(sdUUID=u'20423d5e-188c-4e10-9893-588ceb81b354',
spUUID=u'00000001-0001-0001-0001-000000000311', vmUUID='',
srcImgUUID=u'd73206ed-89ba-48a9-82ff-c107c1af60f0',
srcVolUUID=u'bba1813d-9e91-4e37-bed7-40beedda8051',
dstImgUUID=u'670a7b20-fecd-45c6-af5c-3c7b98258224',
dstVolUUID=u'013d8855-4e49-4984-8266-6a5e9437dff7', description=u'',
dstSdUUID=u'20423d5e-188c-4e10-9893-588ceb81b354', volType=8,
volFormat=5, preallocate=2, postZero=u'false', force=u'false',
discard=False) (logUtils:51)
2017-05-10 11:36:20,152-0300 INFO (jsonrpc/2) [storage.Image] image
d73206ed-89ba-48a9-82ff-c107c1af60f0 in domain
20423d5e-188c-4e10-9893-588ceb81b354 has vollist
[u'bba1813d-9e91-4e37-bed7-40beedda8051'] (image:319)
2017-05-10 11:36:20,169-0300 INFO (jsonrpc/2) [storage.Image]
sdUUID=20423d5e-188c-4e10-9893-588ceb81b354
imgUUID=d73206ed-89ba-48a9-82ff-c107c1af60f0
chain=[<storage.fileVolume.FileVolume object at 0x278e450>] (image:249)
2017-05-10 11:36:20,292-0300 INFO (tasks/0) [storage.Image]
sdUUID=20423d5e-188c-4e10-9893-588ceb81b354
imgUUID=d73206ed-89ba-48a9-82ff-c107c1af60f0
chain=[<storage.fileVolume.FileVolume object at 0x302c6d0>] (image:249)
2017-05-10 11:36:20,295-0300 INFO (tasks/0) [storage.Image]
sdUUID=20423d5e-188c-4e10-9893-588ceb81b354 vmUUID=
srcImgUUID=d73206ed-89ba-48a9-82ff-c107c1af60f0
srcVolUUID=bba1813d-9e91-4e37-bed7-40beedda8051
dstImgUUID=670a7b20-fecd-45c6-af5c-3c7b98258224
dstVolUUID=013d8855-4e49-4984-8266-6a5e9437dff7
dstSdUUID=20423d5e-188c-4e10-9893-588ceb81b354 volType=8 volFormat=RAW
preallocate=SPARSE force=False postZero=False discard=False (image:765)
2017-05-10 11:36:20,305-0300 INFO (tasks/0) [storage.Image] copy source
20423d5e-188c-4e10-9893-588ceb81b354:d73206ed-89ba-48a9-82ff-c107c1af60f0:bba1813d-9e91-4e37-bed7-40beedda8051
vol size 41943040 destination
20423d5e-188c-4e10-9893-588ceb81b354:670a7b20-fecd-45c6-af5c-3c7b98258224:013d8855-4e49-4984-8266-6a5e9437dff7
apparentsize 41943040 (image:815)
2017-05-10 11:36:20,306-0300 INFO (tasks/0) [storage.Image] image
670a7b20-fecd-45c6-af5c-3c7b98258224 in domain
20423d5e-188c-4e10-9893-588ceb81b354 has vollist [] (image:319)
2017-05-10 11:36:20,306-0300 INFO (tasks/0) [storage.Image] Create
placeholder
/rhev/data-center/00000001-0001-0001-0001-000000000311/20423d5e-188c-4e10-9893-588ceb81b354/images/670a7b20-fecd-45c6-af5c-3c7b98258224
for image's volumes (image:149)
2017-05-10 11:36:20,392-0300 INFO (tasks/0) [storage.Volume] Request to
create RAW volume
/rhev/data-center/00000001-0001-0001-0001-000000000311/20423d5e-188c-4e10-9893-588ceb81b354/images/670a7b20-fecd-45c6-af5c-3c7b98258224/013d8855-4e49-4984-8266-6a5e9437dff7
with size = 20480 sectors (fileVolume:439)
2017-05-10 11:37:58,453-0300 INFO (tasks/0) [storage.VolumeManifest]
sdUUID=20423d5e-188c-4e10-9893-588ceb81b354
imgUUID=670a7b20-fecd-45c6-af5c-3c7b98258224 volUUID =
013d8855-4e49-4984-8266-6a5e9437dff7 legality = LEGAL (volume:393)
7 years, 9 months
Upgrading HC from 4.0 to 4.1
by Gianluca Cecchi
Hello,
I'm going to try to update to 4.1 an HC environment, currently on 4.0 with
3 nodes in CentOS 7.3 and one of them configured as arbiter
Any particular caveat in HC?
Are the steps below, normally used for Self Hosted Engine environments the
only ones to consider?
- update repos on the 3 hosts and on the engine vm
- global maintenance
- update engine
- update also os packages of engine vm
- shutdown engine vm
- disable global maintenance
- verify engine vm boots and functionality is ok
Then
- update hosts: preferred way will be from the gui itself that takes care
of moving VMs, maintenance and such or to proceed manually?
Is there a preferred order with which I have to update the hosts, after
updating the engine? Arbiter for first or as the latest or not important at
all?
Any possible problem having disaligned versions of glusterfs packages until
I complete all the 3 hosts? Any known bugs passing from 4.0 to 4.1 and
related glusterfs components?
Thanks in advance,
Gianluca
7 years, 9 months
ovirt-guest-agent - Ubuntu 16.04
by FERNANDO FREDIANI
This is a multi-part message in MIME format.
--------------3E6DFB8B8A97AF19E5E33BB0
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hello
Is the maintainer of ovirt-guest-agent for Ubuntu on this mail list ?
I have noticed that if you install ovirt-guest-agent package from Ubuntu
repositories it doesn't start. Throws an error about python and never
starts. Has anyone noticied the same ? OS in this case is a clean
minimal install of Ubuntu 16.04.
Installing it from the following repository works fine -
http://download.opensuse.org/repositories/home:/evilissimo:/ubuntu:/16.04...
Fernando
--------------3E6DFB8B8A97AF19E5E33BB0
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<font face="arial, helvetica, sans-serif">Hello<br>
<br>
Is the maintainer of ovirt-guest-agent for Ubuntu on this mail
list ?<br>
<br>
I have noticed that if you install ovirt-guest-agent package from
Ubuntu repositories it doesn't start. Throws an error about python
and never starts. Has anyone noticied the same ? OS in this case
is a clean minimal install of Ubuntu 16.04.<br>
<br>
Installing it from the following repository works fine -
<a class="moz-txt-link-freetext" href="http://download.opensuse.org/repositories/home:/evilissimo:/ubuntu:/16.04...">http://download.opensuse.org/repositories/home:/evilissimo:/ubuntu:/16.04...</a><br>
<br>
Fernando<br>
</font>
</body>
</html>
--------------3E6DFB8B8A97AF19E5E33BB0--
7 years, 9 months
[Ovirt 4.0.6] Suggestion required for Network Throughput options
by TranceWorldLogic .
Hi,
To increase network throughput we have changed txqueuelen of network device
and bridge manually. And observed improved throughput.
But in ovirt I not see any option to increase txqueuelen.
Can someone suggest me what will be the right way to increase throughput ?
Note: I am trying to increase throughput for ipsec packets.
Thanks,
~Rohit
7 years, 9 months
add fourth full gluster node and remove arbiter: ovirt 4.1 with hosted engine
by yayo (j)
Hi at all,
we have a 3 node cluster with this configuration:
ovirtzz 4.1 with 3 node hyperconverged with gluster. 2 node are "full
replicated" and 1 node is the arbiter.
Now we have a new server to add to cluster then we want to add this new
server and remove the arbiter (or, make this new server a "full replicated"
gluster with arbiter role? I don't know)
Can you please help me to know what is the right way to do this? Or, Can
you give me any doc or link that explain the steps to do this?
Thank you in advance!
7 years, 10 months
Storage, extend or new lun ?
by Enrico Becchetti Gmail
Dear All,
I've oVirt 3.5.3-1-1.el6 with two kind of storage , NFS and Fibre
Channel. Each Hypervisor
has HBA controller and Data CLutser has four Storage named: DATA_FC,
DATA_NFS, EXPORT
and ISO-DOMAIN.
Anybody know how can I extend a DATA_FC ? Which is the best practies ?
Extend LUN from HP MSA controller or adding a new lun ?
if I extend lun inside HP MSA oVirt see the new size ?
Enrico
Thanks a lot.
Best Regards
7 years, 10 months
HostedEngine VM not visible, but running
by cmc
Hi,
I've migrated from a bare-metal engine to a hosted engine. There were
no errors during the install, however, the hosted engine did not get
started. I tried running:
hosted-engine --status
on the host I deployed it on, and it returns nothing (exit code is 1
however). I could not ping it either. So I tried starting it via
'hosted-engine --vm-start' and it returned:
Virtual machine does not exist
But it then became available. I logged into it successfully. It is not
in the list of VMs however.
Any ideas why the hosted-engine commands fail, and why it is not in
the list of virtual machines?
Thanks for any help,
Cam
7 years, 10 months
Sound Device Custom Property
by Mauricio Perez
This is a multipart message in MIME format.
------=_NextPart_000_0063_01D2F1A4.D9A2A050
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hello Everyone,
I am trying to modify a VM sound device sub element to <codec
type='micro'/>. I understand the only way to perform this is by using a
before vm start vdsm hook to define custom property. Can someone please
guide to setting this up.
* How would I define it in the engine config?
* How do I create the hooking module?
* Is there a source to find pre created hooking modules?
Thank You All!!
------=_NextPart_000_0063_01D2F1A4.D9A2A050
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META =
HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 =
(filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph
{mso-style-priority:34;
margin-top:0in;
margin-right:0in;
margin-bottom:0in;
margin-left:.5in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
/* List Definitions */
@list l0
{mso-list-id:863833036;
mso-list-type:hybrid;
mso-list-template-ids:-1779251030 67698689 67698691 67698693 67698689 =
67698691 67698693 67698689 67698691 67698693;}
@list l0:level1
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:Symbol;}
@list l0:level2
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:"Courier New";}
@list l0:level3
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:Wingdings;}
@list l0:level4
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:Symbol;}
@list l0:level5
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:"Courier New";}
@list l0:level6
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:Wingdings;}
@list l0:level7
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:Symbol;}
@list l0:level8
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:"Courier New";}
@list l0:level9
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:Wingdings;}
ol
{margin-bottom:0in;}
ul
{margin-bottom:0in;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DEN-US =
link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1><p =
class=3DMsoNormal>Hello Everyone,<o:p></o:p></p><p =
class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>I am trying =
to modify a VM sound device sub element to <codec =
type=3D'micro'/>. I understand the only way to perform this is by =
using a before vm start vdsm hook to define custom property. Can someone =
please guide to setting this up.<o:p></o:p></p><p =
class=3DMsoListParagraph style=3D'text-indent:-.25in;mso-list:l0 level1 =
lfo1'><![if !supportLists]><span style=3D'font-family:Symbol'><span =
style=3D'mso-list:Ignore'>·<span style=3D'font:7.0pt "Times New =
Roman"'> =
</span></span></span><![endif]>How would I define it in the engine =
config?<o:p></o:p></p><p class=3DMsoListParagraph =
style=3D'text-indent:-.25in;mso-list:l0 level1 lfo1'><![if =
!supportLists]><span style=3D'font-family:Symbol'><span =
style=3D'mso-list:Ignore'>·<span style=3D'font:7.0pt "Times New =
Roman"'> =
</span></span></span><![endif]>How do I create the hooking =
module?<o:p></o:p></p><p class=3DMsoListParagraph =
style=3D'text-indent:-.25in;mso-list:l0 level1 lfo1'><![if =
!supportLists]><span style=3D'font-family:Symbol'><span =
style=3D'mso-list:Ignore'>·<span style=3D'font:7.0pt "Times New =
Roman"'> =
</span></span></span><![endif]>Is there a source to find pre created =
hooking modules?<o:p></o:p></p><p =
class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>Thank You =
All!!<o:p></o:p></p></div></body></html>
------=_NextPart_000_0063_01D2F1A4.D9A2A050--
7 years, 10 months
Help! No VMs start after reboot of cluster
by cmc
Hi,
I restarted my 3 host cluster after setting it into global maintenance
mode and then shutting down all of the nodes and then bringing them up
again. I moved it out of global maintenance mode and no VM is running,
including the hosted engine.
Any help greatly appreciated!
Thanks,
Cam
7 years, 10 months
vm shutdown long delay is a problem for users of pools
by Paul
This is a multipart message in MIME format.
------=_NextPart_000_0079_01D2EB83.89CE5690
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi,
Shutting down VM's in the portal with the red downfacing arrow takes quite
some time (about 90 seconds). I read this is mainly due to a 60 second delay
in the ovirt-guest-agent. I got used to right-click and use "power off"
instead of "shutdown", which is fine.
My users make use of VM in a VM-pool. They get assigned a VM and after
console disconnect the VM shuts down (default recommended behavior). My
issue is that the users stays assigned to this VM for the full 90 seconds
and cannot do "power off". Suppose he disconnected by accident, he has to
wait 90 seconds until he is assigned to the pool again until he can connect
to another VM.
My questions are:
- Is it possible to decrease the time delay of a VM shutdown? 90
seconds is quite a lot, 10 seconds should be enough
- Is it possible for normal users to use "power off"?
- Is it possible to "unallocate" the user from a VM if it is
powering down? So he can allocate another VM
Kind regards,
Paul
------=_NextPart_000_0079_01D2EB83.89CE5690
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta =
http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 =
(filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph
{mso-style-priority:34;
margin-top:0cm;
margin-right:0cm;
margin-bottom:0cm;
margin-left:36.0pt;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
span.EmailStyle17
{mso-style-type:personal;
font-family:"Calibri",sans-serif;
color:windowtext;}
span.EmailStyle18
{mso-style-type:personal;
font-family:"Calibri",sans-serif;
color:#1F497D;}
span.EmailStyle19
{mso-style-type:personal-reply;
font-family:"Calibri",sans-serif;
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
/* List Definitions */
@list l0
{mso-list-id:1079979482;
mso-list-type:hybrid;
mso-list-template-ids:-963102632 -2055051548 68354051 68354053 68354049 =
68354051 68354053 68354049 68354051 68354053;}
@list l0:level1
{mso-level-start-at:88;
mso-level-number-format:bullet;
mso-level-text:-;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-font-family:Calibri;}
@list l0:level2
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New";}
@list l0:level3
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
@list l0:level4
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Symbol;}
@list l0:level5
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New";}
@list l0:level6
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
@list l0:level7
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Symbol;}
@list l0:level8
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New";}
@list l0:level9
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
ol
{margin-bottom:0cm;}
ul
{margin-bottom:0cm;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DNL =
link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1><p =
class=3DMsoNormal><span lang=3DEN-US =
style=3D'color:#1F497D'>Hi,<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DEN-US style=3D'color:#1F497D'>Shutting =
down VM’s in the portal with the red downfacing arrow takes quite =
some time (about 90 seconds). I read this is mainly due to a 60 second =
delay in the ovirt-guest-agent. I got used to right-click and use =
“power off” instead of “shutdown”, which is =
fine.<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US =
style=3D'color:#1F497D'><o:p> </o:p></span></p><p =
class=3DMsoNormal><span lang=3DEN-US style=3D'color:#1F497D'>My users =
make use of VM in a VM-pool. They get assigned a VM and after console =
disconnect the VM shuts down (default recommended behavior). My issue is =
that the users stays assigned to this VM for the full 90 seconds and =
cannot do “power off”. Suppose he disconnected by accident, =
he has to wait 90 seconds until he is assigned to the pool again until =
he can connect to another VM. <o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DEN-US =
style=3D'color:#1F497D'><o:p> </o:p></span></p><p =
class=3DMsoNormal><span lang=3DEN-US style=3D'color:#1F497D'>My =
questions are:<o:p></o:p></span></p><p class=3DMsoListParagraph =
style=3D'text-indent:-18.0pt;mso-list:l0 level1 lfo1'><![if =
!supportLists]><span lang=3DEN-US style=3D'color:#1F497D'><span =
style=3D'mso-list:Ignore'>-<span style=3D'font:7.0pt "Times New =
Roman"'> =
</span></span></span><![endif]><span lang=3DEN-US =
style=3D'color:#1F497D'>Is it possible to decrease the time delay of a =
VM shutdown? 90 seconds is quite a lot, 10 seconds should be =
enough<o:p></o:p></span></p><p class=3DMsoListParagraph =
style=3D'text-indent:-18.0pt;mso-list:l0 level1 lfo1'><![if =
!supportLists]><span lang=3DEN-US style=3D'color:#1F497D'><span =
style=3D'mso-list:Ignore'>-<span style=3D'font:7.0pt "Times New =
Roman"'> =
</span></span></span><![endif]><span lang=3DEN-US =
style=3D'color:#1F497D'>Is it possible for normal users to use =
“power off”?<o:p></o:p></span></p><p =
class=3DMsoListParagraph style=3D'text-indent:-18.0pt;mso-list:l0 level1 =
lfo1'><![if !supportLists]><span lang=3DEN-US =
style=3D'color:#1F497D'><span style=3D'mso-list:Ignore'>-<span =
style=3D'font:7.0pt "Times New =
Roman"'> =
</span></span></span><![endif]><span lang=3DEN-US =
style=3D'color:#1F497D'>Is it possible to “unallocate” the =
user from a VM if it is powering down? So he can allocate another =
VM<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US =
style=3D'color:#1F497D'><o:p> </o:p></span></p><p =
class=3DMsoNormal><span lang=3DEN-US style=3D'color:#1F497D'>Kind =
regards,<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US =
style=3D'color:#1F497D'><o:p> </o:p></span></p><p =
class=3DMsoNormal><span lang=3DEN-US =
style=3D'color:#1F497D'>Paul<o:p></o:p></span></p></div></body></html>
------=_NextPart_000_0079_01D2EB83.89CE5690--
7 years, 10 months
Unable to rename disks via REST API
by Bruno Rodriguez
Hello everyone,
I'm having some problems about renaming some disks (setting a different
alias, name or description) for VMs disks created from a template. When I
get this URL
https://ovirt-manager/ovirt-engine/api/disks/0123
I can see are the methods sparsify, export, move and copy. I tried to POST
the following XML to the previous URL with no result (as expected, it won't
work)
<disk>
<alias>my_machine_Disk1</alias>
</disk>
I'm quite sure I'm thinking about it in a wrong way (as usual). Any help
would be welcome...
Thank you in advance
--
Bruno Rodríguez Rodríguez
*Port d'Informació Científica (PIC)*
7 years, 10 months
[ANN] oVirt 4.1.3 Third Release Candidate is now available
by Sandro Bonazzola
The oVirt Project is pleased to announce the availability of the Third
Release Candidate of oVirt 4.1.3 for testing, as of June 22nd, 2017
This is pre-release software. Please take a look at our community page[1]
to know how to ask questions and interact with developers and users.
All issues or bugs should be reported via oVirt Bugzilla[2].
This pre-release should not to be used in production.
This update is the first release candidate of the third in a series of
stabilization updates to the 4.1 series.
4.1.3 brings more than 45 enhancements and more than 220 bugfixes,
including more than 120 high or urgent
severity fixes, on top of oVirt 4.1 series
This release is available now for:
* Fedora 24 (tech preview)
* Red Hat Enterprise Linux 7.3 or later
* CentOS Linux (or similar) 7.3 or later
This release supports Hypervisor Hosts running:
* Red Hat Enterprise Linux 7.3 or later
* CentOS Linux (or similar) 7.3 or later
* oVirt Node 4.1
* Fedora 24 (tech preview)
See the release notes draft [3] for installation / upgrade instructions and
a list of new features and bugs fixed.
Notes:
- oVirt Appliance is already available
- oVirt Live is already available[4]
- oVirt Node is already available[4]
We are addressing compose issues for above components which are missing
ansible 2.3 and latest fluentd builds from CentOS SIGs.
Additional Resources:
* Read more about the oVirt 4.1.3 release highlights:
http://www.ovirt.org/release/4.1.3/
* Get more oVirt Project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] https://www.ovirt.org/community/
[2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt
[3] http://www.ovirt.org/release/4.1.3/
[4] resources.ovirt.org/pub/ovirt-4.1-pre/iso/
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
7 years, 10 months
moVirt 2.0 RC 1 released!
by Filip Krepinsky
Hia,
the first RC of moVirt 2.0 has been released!
You can get it from our GitHub [1]; the play store will be upgraded after
considered stable.
The main feature of this release is a support for managing multiple oVirt
installations from one moVirt.
Other changes:
- actions/lists/dashboard are now filtered by selecting accounts/clusters
in the left drawer
- event lists now correctly working for single vm, host, etc..
- better syncing and network detection
- cleaner ui design and connection settings
- enhanced security and support for certificates (import from file)
- sorting and filtering made more usable
- more descriptive errors
- other small enhancements and bug fixes
We would greatly appreciate if you could try it and share your feedback
with us. [2]
Let us know about any suggestions you might have; and as usual, patches are
also welcome :)
Have a great day
Filip
[1]:
https://github.com/oVirt/moVirt/releases/download/v2.0-rc1/moVirt-release...
[2]: https://github.com/oVirt/moVirt
7 years, 10 months
Moving thin provisioned disks question
by Gianluca Cecchi
Hello,
I have a storage domain that I have to empty, moving its disks to another
storage domain,
Both source and target domains are iSCSI
What is the behavior in case of preallocated and thin provisioned disk? Are
they preserved with their initial configuration?
Suppose I have one 500Gb thin provisioned disk
Why can I indirectly see that the actual size is 300Gb only in Snapshots
tab --> Disks of its VM ?
Thanks,
Gianluca
7 years, 10 months
Ovirt installation planning question
by Alan Bunch
--_000_C46E817F004EDF47A188C55D2DB37A84031354DcExchMX3Altourlo_
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: base64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=
--_000_C46E817F004EDF47A188C55D2DB37A84031354DcExchMX3Altourlo_
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: base64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--_000_C46E817F004EDF47A188C55D2DB37A84031354DcExchMX3Altourlo_--
7 years, 10 months
Re: [ovirt-users] hosted-engine network
by Arsène Gschwind
This is a multi-part message in MIME format.
--------------1D0F68AC599E944098853700
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Please find the logs here:
https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards,
Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards,
Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
> Hi,
>
> I would love to help you, but I didn't get the log file..
>
> Regards
>
> Martin Sivak
>
> On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind
> <arsene.gschwind(a)unibas.ch> wrote:
>> Hi all,
>>
>> Any chance to get help or a hint to solve my Problem, I have no idea how to
>> change this configuration since it is not possible using the WebUI.
>>
>> Thanks a lot.
>>
>> Regards,
>> Arsène
>>
>>
>> On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
>>
>> Hi all,
>>
>> Please find attached the agent.log DEBUG and a screenshot from webui
>>
>> Thanks a lot
>>
>> Best regards,
>>
>> Arsène
>>
>>
>> On 06/07/2017 11:27 AM, Martin Sivak wrote:
>>
>> Hi all,
>>
>> Yanir is right, the local vm.conf is just a cache of what was
>> retrieved from the engine.
>>
>> I might be interesting to check what the configuration of the engine
>> VM shows when edited using the webadmin. Or enable debug logging [1]
>> for hosted engine and add the OVF dump we send there now and then (the
>> xml representation of the VM).
>>
>> [1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
>> level for root logger to DEBUG
>>
>> Best regards
>>
>> Martin Sivak
>>
>> On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn<yquinn(a)redhat.com> wrote:
>>
>> If im not mistaken the values of vm.conf are repopulated from the database ,
>> but i wouldn't recommend meddling with DB data.
>> maybe the network device wasn't set properly during the hosted engine setup
>> ?
>>
>> On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind<arsene.gschwind(a)unibas.ch>
>> wrote:
>>
>> Hi,
>>
>> Any chance to get a hint how to change the vm.conf file so it will not be
>> overwritten constantly?
>>
>> Thanks a lot.
>>
>> Arsène
>>
>>
>> On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
>>
>> Hi,
>>
>> I've migrated our oVirt engine to hosted-engine located on a FC storage
>> LUN, so far so good.
>> For some reason I'm not able to start the hosted-engine VM, after digging
>> in the log files i could figured out the reason. The Network device was set
>> to "None" as follow:
>>
>> devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>>
>> I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
>> and set the nic device to ovirtmgnt, the I could start the hosted-engine
>> using :
>> hosted-engine --vm-start
>> --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
>>
>> The nic device line in vm.conf.new looks like:
>>
>> devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>>
>> I tried to find out a way to change this setting on vm.conf but it is
>> constantly rewritten, even when using the webui is say's:
>> HostedEngine:
>>
>> There was an attempt to change Hosted Engine VM values that are locked.
>>
>> Is there a way to modify/correct the hosted-engine vm.conf file so it will
>> stay and not be overwritten?
>>
>> Thanks a lot for any hint/help
>>
>> rgds,
>> arsène
>>
>> --
>>
>> Arsène Gschwind
>> Fa. Sapify AG im Auftrag der Universität Basel
>> IT Services
>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>> Tel. +41 79 449 25 63 |http://its.unibas.ch
>> ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>> --
>>
>> Arsène Gschwind
>> Fa. Sapify AG im Auftrag der Universität Basel
>> IT Services
>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>> Tel. +41 79 449 25 63 |http://its.unibas.ch
>> ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>> --
>>
>> Arsène Gschwind
>> Fa. Sapify AG im Auftrag der Universität Basel
>> IT Services
>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>> Tel. +41 79 449 25 63 |http://its.unibas.ch
>> ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>> --
>>
>> Arsène Gschwind
>> Fa. Sapify AG im Auftrag der Universität Basel
>> IT Services
>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>> Tel. +41 79 449 25 63 |http://its.unibas.ch
>> ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
--------------1D0F68AC599E944098853700
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Please find the logs here:
<a class="moz-txt-link-freetext" href="https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0">https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0</a></p>
<p>Thanks.</p>
<p>Regards,<br>
Arsène<br>
</p>
<p>Hi,</p>
<p>Sorry for this, it seems that the attachment have been detached.</p>
<p>So let's try again</p>
<p>Regards,<br>
Arsène<br>
</p>
<br>
<div class="moz-cite-prefix">On 06/12/2017 11:59 AM, Martin Sivak
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAF0zDV6rJKaSTuhQJFZKueEs=2HoiWOAuNc2Oy_9HHFT9y6NXw@mail.gmail.com">
<pre wrap="">Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind
<a class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"><arsene.gschwind(a)unibas.ch></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to
change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards,
Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was
retrieved from the engine.
I might be interesting to check what the configuration of the engine
VM shows when edited using the webadmin. Or enable debug logging [1]
for hosted engine and add the OVF dump we send there now and then (the
xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <a class="moz-txt-link-rfc2396E" href="mailto:yquinn@redhat.com"><yquinn(a)redhat.com></a> wrote:
If im not mistaken the values of vm.conf are repopulated from the database ,
but i wouldn't recommend meddling with DB data.
maybe the network device wasn't set properly during the hosted engine setup
?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <a class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"><arsene.gschwind(a)unibas.ch></a>
wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be
overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage
LUN, so far so good.
For some reason I'm not able to start the hosted-engine VM, after digging
in the log files i could figured out the reason. The Network device was set
to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
and set the nic device to ovirtmgnt, the I could start the hosted-engine
using :
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is
constantly rewritten, even when using the webui is say's:
HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will
stay and not be overwritten?
Thanks a lot for any hint/help
rgds,
arsène
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a>
ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its(a)unibas.ch</a> | +41 61 267 14 11
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a>
ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its(a)unibas.ch</a> | +41 61 267 14 11
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a>
ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its(a)unibas.ch</a> | +41 61 267 14 11
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a>
ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its(a)unibas.ch</a> | +41 61 267 14 11
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
</blockquote>
<br>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height: 150%">
<font color="#000000"><font face="Tahoma, serif"> <font
style="font-size: 8pt" size="1"> <b>Arsène Gschwind</b> </font>
</font> <font color="#000000"> <font face="Tahoma, serif"> <font
style="font-size: 8pt" size="1"> </font> </font> </font>
<font face="Tahoma, serif"> <font style="font-size: 8pt"
size="1"> </font> </font> <font face="Tahoma, serif">
</font> <font color="#000000"> <font face="Tahoma, serif"> <font
style="font-size: 8pt" size="1"> <br>
</font> </font> </font> <font color="#7f7f7f"> <font
face="Tahoma, serif"> <font style="font-size: 8pt"
size="1"> Fa. Sapify AG im Auftrag der Universität Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font> </font> <a
href="http://its.unibas.ch/"> <font face="Tahoma, serif"> <font
style="font-size: 8pt" size="1"> http://its.unibas.ch </font>
</font> </a><br>
<font color="#7f7f7f"> <font face="Tahoma, serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk: <a
class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch">support-its(a)unibas.ch</a>
| +41 61 267 14 11 </font> </font> </font> </font></p>
<font color="#000000"> </font></div>
</body>
</html>
--------------1D0F68AC599E944098853700--
7 years, 10 months
Test Email
by Konstantinos Bonaros
Sending test email please ignore!
7 years, 10 months
Windows USB Redirection
by Konstantinos Bonaros
Hi All,
I have Ovirt 4.1 with 3 nodes on top glusterfs, all are running smoothly
except USB redirection.
I Have 2 VMs:
- Windows 2016 64bit
- Windows 10 64bit
Although both are able to see USB have attached issue.
On Past when testing on Windows 7 VM USB redirection was running smoothly.
Can i have your suggestion on this issue.
Thank you in advanced.
Regards,
Konstantinos
7 years, 10 months
Ovirt remove network from hosted engine
by Abi Askushi
Hi all,
When setting up hosted engine setup on top gluster with 3 nodes, I had
gluster configured on a separate network interface, as recommended. When I
tried later to upload ISO from engine to ISO domain, the engine was not
able to upload it since the VM did not have access to the separate storage
network. I then added the storage network interface to the hosted engine
and ISO upload succeeded.
1st question: do I need to add the network interface to engine in order to
upload ISOs? does there exist any alternate way?
Then I proceeded to configure bonding for the storage domain, bonding 2
NICs at each server. When trying to set a custom bond of mode=6 (as
recommended from gluster) I received a warning that mode0, 5 and 6 cannot
be configured since the interface is used from VMs. I also understood that
having the storage network assigned to VMs makes it a bridge which
decreases performance of networking. When trying to remove the network
interface from engine it cannot be done, since the engine is running.
2nd question: Is there a way I can remove the secondary storage network
interface from the engine?
Many thanx
7 years, 10 months
oVirt split brain resolution
by Abi Askushi
Hi All,
I have a 3 node ovirt 4.1 setup. I lost one node due to raid controller
issues. Upon restoration I have the following split brain, although the
hosts have mounted the storage domains:
gluster volume heal engine info split-brain
Brick gluster0:/gluster/engine/brick
/e1c80750-b880-495e-9609-b8bc7760d101/ha_agent
Status: Connected
Number of entries in split-brain: 1
Brick gluster1:/gluster/engine/brick
/e1c80750-b880-495e-9609-b8bc7760d101/ha_agent
Status: Connected
Number of entries in split-brain: 1
Brick gluster2:/gluster/engine/brick
/e1c80750-b880-495e-9609-b8bc7760d101/ha_agent
Status: Connected
Number of entries in split-brain: 1
Hosted engine status gives the following:
hosted-engine --vm-status
Traceback (most recent call last):
File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib64/python2.7/runpy.py", line 72, in _run_code
exec code in run_globals
File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/vm_status.py",
line 173, in <module>
if not status_checker.print_status():
File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/vm_status.py",
line 103, in print_status
all_host_stats = self._get_all_host_stats()
File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/vm_status.py",
line 73, in _get_all_host_stats
all_host_stats = ha_cli.get_all_host_stats()
File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
line 160, in get_all_host_stats
return self.get_all_stats(self.StatModes.HOST)
File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
line 105, in get_all_stats
stats = broker.get_stats_from_storage(service)
File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
line 233, in get_stats_from_storage
result = self._checked_communicate(request)
File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
line 261, in _checked_communicate
.format(message or response))
ovirt_hosted_engine_ha.lib.exceptions.RequestError: Request failed: failed
to read metadata: [Errno 5] Input/output error:
'/rhev/data-center/mnt/glusterSD/10.100.100.1:
_engine/e1c80750-b880-495e-9609-b8bc7760d101/ha_agent/hosted-engine.metadata'
Any idea on how to resolve this split brain?
Thanx,
Alex
7 years, 10 months
iSCSI storage domain and multipath when adding node
by Gianluca Cecchi
Hello,
my configuration is what described here:
http://lists.ovirt.org/pipermail/users/2017-March/080992.html
So I'm using iSCSI multipath and not bonding
can anyone reproduce?
Initial situation is only one node configured and active with some VMS
I go and configure a second node; it tries to activate but networks are not
all already mapped and so gies to non operational.
I setup all networks and activate the node
It happens that:
- on the first node where I currently have 2 iSCSI connections and
2multipath lines (with p1p1.100 and p1p2) it is instantiated a new iSCSI
SID using interface "default" and in multipath -l output I see now 3 lines
- on the newly added node I only see 1 iSCSI SID using interface default
My way to solve the situation was to go inside iscsi multipath section
do nothing but save the same config
brutally on first node
iscsiadm -m session -u
--> all iscsi sessions are closed
after a while I see again the original 2 connections recovered, with
correct interface names used
- on second node
iscsiadm -m session -u
--> the only session is cloed
nothing happens
if I set to maintenance the node and then activate the node
--> the 2 correct iscsi sessions are activated...
Thanks
Gianluca
7 years, 10 months
Re: [ovirt-users] oVirt Live USB3 question
by Lev Veyde
Hi Michael,
I'm glad that I could help.
Yes, while USB3 has an impressive interface (and thus potential) speed of
up to 5 gbps (or over 600 MB/sec) the actual hardware normally provides
speeds which for basic DOKs are even under USB 2.0 spec. in most cases
(under 60 MB/sec.).
However, as I also mentioned, it will only affect the time it takes to
load, and from my experience with any decent DOK it's quite OK, you don't
even have to invest into ultra-expensive and ultra-fast one, especially if
you don't plan to "re-burn" the DOK very often.
Thanks in advance,
On Mon, Jun 26, 2017 at 8:05 PM, Michael McConachie <
michael.mcconachie(a)hotmail.com> wrote:
> Lev,
>
>
> That's exactly what I thought; you hit all the points (including slow DOM
> SATA I type performance vs. USB3 speeds). That's all I needed
> clarification on, before running down the rabbit hole.
>
>
> MM
>
>
>
> ------------------------------
> *From:* Lev Veyde <lveyde(a)redhat.com>
> *Sent:* Monday, June 26, 2017 4:00 PM
> *To:* Michael McConachie
> *Cc:* users(a)ovirt.org
> *Subject:* Re: [ovirt-users] oVirt Live USB3 question
>
> Hi Michael,
>
> oVirt-Live's basically functions as any other LiveCD, so no special
> differences here.
> Generally it means that necessary kernel/kernel modules/programs are
> loaded into RAM, and access to the image is needed if e.g. one wants to run
> some more programs.
> All writes are done into RAM.
>
> Note however that since the whole CD isn't copied into RAM, so you still
> need it to be accessible, e.g. have the USB DOK be inserted into the
> computer.
>
> As you already mentioned the oVirt-Live is designed to work in a sandboxed
> environment as far as the network is concerned.
> It was never designed nor tested to work with i.e. external storages, as
> in order to do so the network configuration will have to be modified.
>
> Regarding performance: we haven't tested it, but probably the oVirt-Live
> may take a bit more time to load when compared to normal installation.
> This is because USB DOKs are generally slower than SAS/SATA HDDs/SSDs.
> Once loaded however the performance will be similar and in some cases even
> greater, since all writes are done to the RAM.
> The price of this is of course that once the system is rebooted for
> whatever reason all data is lost.
>
> Hope it helped,
>
> On Sat, Jun 24, 2017 at 5:10 AM, Michael McConachie <
> michael.mcconachie(a)hotmail.com> wrote:
>
>> Hi all,
>>
>>
>> Potentially stupid question here. Sorry in advance if so. I have always
>> built out full blown multi rack instances of oVirt, and RHEV for clients,
>> but the following question has me wondering before I go digging and trying
>> it out...
>>
>>
>> I realize that the oVirtLive ISO is for demo purposes, sandboxing, and
>> not production: I have a client, who is in need of a bootable AIO-based USB
>> install with the caveat of being able to connect to the computer's HD and
>> other external storage at that point (for the Storage and ISO domains that
>> I'll create afterwards). This is because they have one BM to work with and
>> they don't want the extra overhead using an SSD HD slot. They don't want to
>> use a Sata DOM either if possible.
>>
>> In saying that, and concerning the oVirt LiveISO capabilities - I have
>> two questions.
>>
>>
>> - Does the AIO USB install load necessary runtimes into memory, similar
>> to esxi bootable USBs and utilize the base hardware afterwards so that the
>> rest of the operations are ran in memory, hitting the disk (USB in this
>> case) like a normal OS load when needed for kernel calls, etc..??
>>
>> - Are there a terrible performance costs if we stay with USB3 (which has
>> a ridiculous theoretical speed in certain hardware matching situations)?
>>
>>
>> Thanks in advance for anyone who might have already crossed this bridge
>> and can provide insight.
>>
>>
>>
>> Michael J. McConachie | keys.fedoraproject.org | PubKey: 0x7BCD88F8
>>
>> *NOTE: The information included and/or attached in this electronic mail
>> transmission may contain confidential or privileged information and is
>> intended solely for the addressee(s). Any unauthorized disclosure,
>> reproduction, distribution or the taking of action in reliance on the **contents
>> of the information are strictly prohibited. If you have received the
>> message in error, please notify the sender by reply transmission and delete
>> the message without copying, disclosing or forwarding.*
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
>
> Lev Veyde
>
> Software Engineer, RHCE | RHCVA | MCITP
>
> Red Hat Israel
>
> <https://www.redhat.com>
>
> lev(a)redhat.com | lveyde(a)redhat.com
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>
--
Lev Veyde
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
7 years, 10 months
Access VM Console on a Smart Phone with User Permission
by Jerome Roque
Good day oVirt Users,
I need some little help. I have a KVM and used oVirt for the management of
VMs. What I want is that my client will log on to their account and access
their virtual machine using their Smart phone. I tried to install mOvirt
and yes can connect to the console of my machine, but it is only accessible
for admin console. Tried to use web console, it downloaded console.vv but
can't open it. By any chance could make this thing possible?
Thank you,
Jerome
7 years, 10 months
"Could not detect Guest Agent on VM"
by Sven Achtelik
--_000_BFAB40933B3367488CE6299BAF8592D1014E52D7B127SOCRATESasl_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi All,
I have several Windows VMs (Server 2012, Server 2012 R2) running and the gu=
est tools are installed. IF I go and check the Services in those VMs I can =
also see the "Ovirt Guest Service" running and the "QEMU Guest Agent" runni=
ng. Also there is Information about the VM show in the GUI, like installed =
applications etc.. I've tried several Versions of the tools and even with t=
he latest 4.1.5 I can't get that message to disappear.
Am I doing something wrong ?
How does this affect the Backup-API and possible Snapshots are taken for Ba=
ckups ?
If you have any hints please let me know.
Thank you,
Sven
--_000_BFAB40933B3367488CE6299BAF8592D1014E52D7B127SOCRATESasl_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV=3D"Content-Type" CONTENT=
=3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros=
oft Word 15 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.E-MailFormatvorlage17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 2.0cm 70.85pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DDE link=3D"#0563C1" v=
link=3D"#954F72"><div class=3DWordSection1><p class=3DMsoNormal>Hi All,<o:p=
></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal><=
span lang=3DEN-US>I have several Windows VMs (Server 2012, Server 2012 R2) =
running and the guest tools are installed. IF I go and check the Services i=
n those VMs I can also see the “Ovirt Guest Service” running an=
d the “QEMU Guest Agent” running. Also there is Information abo=
ut the VM show in the GUI, like installed applications etc.. I’ve tri=
ed several Versions of the tools and even with the latest 4.1.5 I can’=
;t get that message to disappear.<o:p></o:p></span></p><p class=3DMsoNormal=
><span lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoNormal><span =
lang=3DEN-US>Am I doing something wrong ? <o:p></o:p></span></p><p class=3D=
MsoNormal><span lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoNorm=
al><span lang=3DEN-US>How does this affect the Backup-API and possible Snap=
shots are taken for Backups ? <o:p></o:p></span></p><p class=3DMsoNormal><s=
pan lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoNormal><span lan=
g=3DEN-US>If you have any hints please let me know. <o:p></o:p></span></p><=
p class=3DMsoNormal><span lang=3DEN-US><o:p> </o:p></span></p><p class=
=3DMsoNormal><span lang=3DEN-US>Thank you, <o:p></o:p></span></p><p class=
=3DMsoNormal><span lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoN=
ormal><span lang=3DEN-US>Sven <o:p></o:p></span></p><p class=3DMsoNormal><o=
:p> </o:p></p></div></body></html>=
--_000_BFAB40933B3367488CE6299BAF8592D1014E52D7B127SOCRATESasl_--
7 years, 10 months
oVirt Live USB3 question
by Michael McConachie
--_000_DM5PR03MB263695A8C2F650880DC40D8B8CD90DM5PR03MB2636namp_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi all,
Potentially stupid question here. Sorry in advance if so. I have always bu=
ilt out full blown multi rack instances of oVirt, and RHEV for clients, but=
the following question has me wondering before I go digging and trying it =
out...
I realize that the oVirtLive ISO is for demo purposes, sandboxing, and not =
production: I have a client, who is in need of a bootable AIO-based USB ins=
tall with the caveat of being able to connect to the computer's HD and othe=
r external storage at that point (for the Storage and ISO domains that I'll=
create afterwards). This is because they have one BM to work with and the=
y don't want the extra overhead using an SSD HD slot. They don't want to us=
e a Sata DOM either if possible.
In saying that, and concerning the oVirt LiveISO capabilities - I have two =
questions.
- Does the AIO USB install load necessary runtimes into memory, similar to =
esxi bootable USBs and utilize the base hardware afterwards so that the res=
t of the operations are ran in memory, hitting the disk (USB in this case) =
like a normal OS load when needed for kernel calls, etc..??
- Are there a terrible performance costs if we stay with USB3 (which has a =
ridiculous theoretical speed in certain hardware matching situations)?
Thanks in advance for anyone who might have already crossed this bridge and=
can provide insight.
Michael J. McConachie | keys.fedoraproject.org | PubKey: 0x7BCD88F8
NOTE: The information included and/or attached in this electronic mail tran=
smission may contain confidential or privileged information and is intended=
solely for the addressee(s). Any unauthorized disclosure, reproduction, di=
stribution or the taking of action in reliance on the contents of the infor=
mation are strictly prohibited. If you have received the message in error, =
please notify the sender by reply transmission and delete the message witho=
ut copying, disclosing or forwarding.
--_000_DM5PR03MB263695A8C2F650880DC40D8B8CD90DM5PR03MB2636namp_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-=
1">
<style type=3D"text/css" style=3D"display:none;"><!-- P {margin-top:0;margi=
n-bottom:0;} --></style>
</head>
<body dir=3D"ltr">
<div id=3D"divtagdefaultwrapper" style=3D"font-size:12pt;color:#000000;font=
-family:'Courier New',monospace;" dir=3D"ltr">
<p><span>Hi all,</span></p>
<p><br>
</p>
<p>Potentially stupid question here. Sorry in advance if so. I have a=
lways built out full blown multi rack instances of oVirt, and RHEV for clie=
nts, but the following question has me wondering before I go digging and tr=
ying it out...</p>
<p><br>
</p>
<p>I realize that the oVirtLive ISO is for demo purposes, sandboxing, and n=
ot production: I have a client, who is in need of a bootable AIO-based USB =
install with the caveat of being able to connect to the computer's HD and o=
ther external storage at that point
(for the Storage and ISO domains that I'll create afterwards). This =
is because they have one BM to work with and they don't want the extra=
overhead using an SSD HD slot. They don't want to use a Sata DOM either if=
possible.<br>
</p>
<br>
<p>In saying that, and concerning the oVirt LiveISO capabilities -&nbs=
p;I have two questions.</p>
<p><br>
</p>
<p>- Does the AIO USB install load necessary runtimes into memory, similar =
to esxi bootable USBs and utilize the base hardware afterwards so that the =
rest of the operations are ran in memory, hitting the disk (USB in this cas=
e) like a normal OS load when needed
for kernel calls, etc..??</p>
<p>- Are there a terrible performance costs if we stay with USB3 (which has=
a ridiculous theoretical speed in certain hardware matching situations)?</=
p>
<p><br>
</p>
<p>Thanks in advance for anyone who might have already crossed this bridge =
and can provide insight.<br>
</p>
<p><br>
</p>
<div id=3D"Signature">
<pre><font style=3D"font-size:10pt" size=3D"2" face=3D"Courier New"><br>Mic=
hael J. McConachie</font><font style=3D"font-size:10pt" size=3D"2" face=3D"=
Courier New"><font style=3D"font-size:10pt"> | </font><font style=3D"font-s=
ize:10pt" color=3D"#008A17">keys.fedoraproject.org</font><font style=3D"fon=
t-size:10pt"> </font><font style=3D"font-size:10pt" color=3D"#AC193D"><font=
style=3D"" color=3D"#000000">|</font> PubKey: 0x7BCD88F8</font><br></font>=
</pre>
<font style=3D"font-size:10pt" size=3D"2" face=3D"Courier New"><i><font sty=
le=3D"" color=3D"#ff0000">NOTE:
</font><font style=3D"" color=3D"#366092">The information included and/or a=
ttached in this electronic mail transmission may contain confidential or pr=
ivileged information and is intended solely for the addressee(s). Any unaut=
horized disclosure, reproduction, distribution
or the taking of action in reliance on the </font></i></font><font style=
=3D"font-size:10pt" size=3D"2" face=3D"Courier New"><i><font style=3D"" col=
or=3D"#366092">contents of the information are strictly prohibited. If you =
have received the message in error, please notify
the sender by reply transmission and delete the message without copying, d=
isclosing or forwarding.</font></i></font>
</div>
</div>
</body>
</html>
--_000_DM5PR03MB263695A8C2F650880DC40D8B8CD90DM5PR03MB2636namp_--
7 years, 10 months
Hot Memory add and Physical Memory guaranteed
by Luca 'remix_tj' Lorenzetto
Hello,
i just tested the memory hot add to a vm. This vm had 2048 MB. I set
the new memory to 2662 MB.
I logged into the vm and i've seen that hasn't been any memory change,
even if i said to the manager to apply memory expansion immediately.
Memory shown by free -m is 1772 MB.
Looking around i've found that that value was set in the option called
"Physical Memory guaranteed".
I tried setting this parameter to an higher value, but is still
showing 1772, even if it says that "Memory" parameter will be changed
immediately and minAllocatedMemory is changed at next boot.
What is the right workflow to hot increase the ram of a vm?
Luca
--
"E' assurdo impiegare gli uomini di intelligenza eccellente per fare
calcoli che potrebbero essere affidati a chiunque se si usassero delle
macchine"
Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716)
"Internet è la più grande biblioteca del mondo.
Ma il problema è che i libri sono tutti sparsi sul pavimento"
John Allen Paulos, Matematico (1945-vivente)
Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>
7 years, 10 months
Ovirt adding routes
by Alan Griffiths
Hi,
When installing an ovirt host I got these routes automatically added
default dev ovirtmgmt table 2886865805 scope link
172.18.19.128/26 via 172.18.19.141 dev ovirtmgmt table 2886865805
What is their intended purpose? It seems to be stopping packets from being
correctly routed to the local gateway.
Thanks,
Alan
7 years, 10 months
import and old datadomain
by Ben De Luca
Hey,
So, our DR plans included the idea of importing old domains. Is that
meant to work now?
-ben
*very tired sysadmin*
7 years, 10 months
migrating VMS from old hosted engine to new hosted engine
by Paul Groeneweg | Pazion
We are moving our VMs from an old 3.6 oVirt platform to a new oVirt 4.1
platform.
I am looking for an easy way to migrate the VMs. ( I know about export
domain, but this takes 2 times a copy action ) I tested and just detaching
the Data domain and attaching it, didn't work.
Then I found the VM import option:
- Adding a ssh key gen and setting password on virsh
- load a list of machines in the webinterface from VM import
- when I start an import the system complains:
The following VMs retrieved from external server
qemu+ssh://root@xxx.xxx.xxx.xxx/system are not in down status: VM [VM-NAME].
- I tried to suspend the VM, but this didn;t work either ( same error )
- Problem is ,when VM is shutdown, it disappears from this system list.
Is there a way to directly import a VM from old oVirt platform to the new
platform
Looking forward to find a solution to quickly migrate our VMs.
Best Regards,
Paul Groeneweg
7 years, 10 months
Very big device. Trying to use READ CAPACITY
by Iman Darabi
hi.
i'm using ovirt version 4.0 .
I've created two LUNs. firs lun is 2047GB and working properly as data
domain. but when i try to add second lun as second data domain, i get this
error on server:
Jun 21 13:22:41 compute52 kernel: sd 12:0:0:16384: [sdf] Very big device.
Trying to use READ CAPACITY(16).
Jun 21 13:22:41 compute52 kernel: sd 5:0:0:0: [sdb] Very big device. Trying
to use READ CAPACITY(16).
Jun 21 13:22:41 compute52 kernel: sd 12:0:1:16384: [sdg] Very big device.
Trying to use READ CAPACITY(16).
Jun 21 13:22:41 compute52 kernel: sd 5:0:1:0: [sdc] Very big device. Trying
to use READ CAPACITY(16).
Jun 21 13:22:41 compute52 kernel: sd 12:0:0:0: [sdd] Read Capacity(10)
failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jun 21 13:22:41 compute52 kernel: sd 12:0:0:0: [sdd] Sense Key : Illegal
Request [current]
Jun 21 13:22:41 compute52 kernel: sd 12:0:0:0: [sdd] Add. Sense: Logical
unit not supported
Jun 21 13:22:41 compute52 kernel: sd 12:0:1:0: [sde] Read Capacity(10)
failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jun 21 13:22:41 compute52 kernel: sd 12:0:1:0: [sde] Sense Key : Illegal
Request [current]
Jun 21 13:22:41 compute52 kernel: sd 12:0:1:0: [sde] Add. Sense: Logical
unit not supported
Jun 21 13:22:41 compute52 kernel: device-mapper: table: 253:16: multipath:
error getting device
Jun 21 13:22:41 compute52 kernel: device-mapper: ioctl: error adding target
to table
Jun 21 13:22:41 compute52 multipathd: dm-16: remove map (uevent)
Jun 21 13:22:41 compute52 multipathd: dm-16: remove map (uevent)
error shows that second lun is very big device, but i've created second lun
as 10GB for test.
BTW: is there any good documentation for ovirt and FC in detail. all
administration docs are using GUI ... .
--
R&D expert at Ferdowsi University of Mashhad
https://ir.linkedin.com/in/imandarabi
<https://www.linkedin.com/profile/public-profile-settings?trk=prof-edit-ed...>
7 years, 10 months
Re: [ovirt-users] VM live migration and NFS 4.2
by Markus Stockhausen
------=_NextPartTM-000-e1c15413-104b-461e-a7cc-b2d505c0c434
Content-Type: multipart/alternative;
boundary="_000_7e055b7632964615b6e8181e0a661cd0emailandroidcom_"
--_000_7e055b7632964615b6e8181e0a661cd0emailandroidcom_
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64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--_000_7e055b7632964615b6e8181e0a661cd0emailandroidcom_
Content-Type: text/html; charset="utf-8"
Content-ID: <386F76CBA452124689B36B083509DCE5(a)collogia.de>
Content-Transfer-Encoding: base64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--_000_7e055b7632964615b6e8181e0a661cd0emailandroidcom_--
------=_NextPartTM-000-e1c15413-104b-461e-a7cc-b2d505c0c434
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"
****************************************************************************
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
Weitergabe dieser Mail ist nicht gestattet.
Über das Internet versandte E-Mails können unter fremden Namen erstellt oder
manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine
rechtsverbindliche Willenserklärung.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
Vorstand:
Kadir Akin
Dr. Michael Höhnerbach
Vorsitzender des Aufsichtsrates:
Hans Kristian Langva
Registergericht: Amtsgericht Köln
Registernummer: HRB 52 497
This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
e-mails sent over the internet may have been written under a wrong name or
been manipulated. That is why this message sent as an e-mail is not a
legally binding declaration of intention.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
executive board:
Kadir Akin
Dr. Michael Höhnerbach
President of the supervisory board:
Hans Kristian Langva
Registry office: district court Cologne
Register number: HRB 52 497
****************************************************************************
------=_NextPartTM-000-e1c15413-104b-461e-a7cc-b2d505c0c434--
7 years, 10 months
VM live migration and NFS 4.2
by Markus Stockhausen
This is a multi-part message in MIME format.
------=_NextPartTM-000-43bd1b86-b37d-4e90-be0e-0009cc3cc1fc
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi,=0A=
=0A=
we are currently evaluating NFS 4.2 based storage for OVirt 4.1.2. Normal o=
peration=0A=
and discard support work like a charm. =0A=
=0A=
For some strange reason we cannot use VM live migration any more. As soon a=
s one =0A=
NFS 4.2 based VM disk is doing disk I/O during the operation. VM stalls and=
is paused. =0A=
It seems as if qemu on target node cannot take over disk images. See BZ1464=
787. =0A=
=0A=
Has anybody else seen similar issues?=0A=
=0A=
Best regards. =0A=
=0A=
Markus =
------=_NextPartTM-000-43bd1b86-b37d-4e90-be0e-0009cc3cc1fc
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"
****************************************************************************
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
Weitergabe dieser Mail ist nicht gestattet.
Über das Internet versandte E-Mails können unter fremden Namen erstellt oder
manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine
rechtsverbindliche Willenserklärung.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
Vorstand:
Kadir Akin
Dr. Michael Höhnerbach
Vorsitzender des Aufsichtsrates:
Hans Kristian Langva
Registergericht: Amtsgericht Köln
Registernummer: HRB 52 497
This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
e-mails sent over the internet may have been written under a wrong name or
been manipulated. That is why this message sent as an e-mail is not a
legally binding declaration of intention.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
executive board:
Kadir Akin
Dr. Michael Höhnerbach
President of the supervisory board:
Hans Kristian Langva
Registry office: district court Cologne
Register number: HRB 52 497
****************************************************************************
------=_NextPartTM-000-43bd1b86-b37d-4e90-be0e-0009cc3cc1fc--
7 years, 10 months
hosted engine local disk estimate for OVA file
by Ben De Luca
Hi,
I am in the middle of a disaster recovery situation trying to install
ovirt 4.1 after a failure of some of our NFS systems. So I was redeploying
4.0 but there is a bug with the image uploader, that means I cant upload
images. Our actually virtual machine hosts have very small HD's and the
current 4.1 release installer thinks that the OVA extracted is 50GiB, I
have exactly 50GB free! yay. So I did manage to hack the installer, to
ignore my local disk space as the OVA is really only a few gigs in side.
But its been pretty painful. Any chance of some one fixing the
estimate there, I have read through the code, there was an attempt to find
out the real size but they gave up and just guessed.
-bd
*tired sysadmin*
7 years, 10 months
Re: [ovirt-users] VDSM ConnectStorageServerVDS failed
by Elad Ben Aharon
You're welcome
On Sun, Jun 25, 2017 at 12:38 PM, JC Clark <jc(a)mcsaipan.net> wrote:
> Mr Aharon,
>
> Thank you for an expedient reply. Your suggestions pointed me in the
> right direction. I was concentrating on the Hosts when it was the storage
> I should have paid more attention to. It seems that if any one of the
> Storage Domains is not connecting properly, the system refuses to restore.
>
> It turns out that after the power failure, an inconspicuous server had not
> come up properly. It had the ISO Domain and an unused Data Domain which
> was still attached. These caused the failure. BZ to you sir and good day.
>
> Thank you
>
>
>
> On 06/25/2017 06:54 PM, Elad Ben Aharon wrote:
>
> Hi,
>
> Which types of storage do you have in the data center?
>
> In case it's a block based storage (iSCSI/FC), check that the devices
> (LUNs) where you domains reside are accessible though multipath and LVM:
>
> # multipath -ll
> # pvs
> # vgs
>
> In case it's a file based storage (NFS/GlusterFS), check that the storage
> domain file system is mounted under /rhev/data-center/mnt
>
> # mount | grep '/rhev/data-center'
>
> On Sun, Jun 25, 2017 at 11:29 AM, JC Clark <jc(a)mcsaipan.net> wrote:
>
>> Dear All,
>>
>> Is there a reason that a perfectly well working Ovirt 4.1 Engine after a
>> power failure, would not allow the hosts to activate because of "VDSM
>> ConnectStorageServerVDS failed". All firewalls are down, I have
>> reinstalled the host, upgraded everything (host and engine), deleted and
>> reinstalled hosts, I can ssh to all from all. Any clues??
>>
>> Thanks ahead of time..
>>
>> --
>> Warm Regards,
>> JC Clark
>> IT Director
>> Mount Carmel School
>> Saipan, CNMI
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> --
> Warm Regards,
>
> JC Clark
> IT Director
> Mount Carmel School
> Saipan, CNMI
> (670) 235-6272 office(670) 483-8684 cell
>
>
7 years, 10 months
Re: [ovirt-users] VDSM ConnectStorageServerVDS failed
by Elad Ben Aharon
Can you please provide engine.log and vdsm.log?
On Sun, Jun 25, 2017 at 2:29 PM, JC Clark <jc(a)mcsaipan.net> wrote:
> Mr. Aharon,
>
> One question comes to mind, if the mounts don't mount to the rhev... mount
> point, what is the easiest way to rectify that problem?
>
>
>
> On 06/25/2017 06:54 PM, Elad Ben Aharon wrote:
>
> Hi,
>
> Which types of storage do you have in the data center?
>
> In case it's a block based storage (iSCSI/FC), check that the devices
> (LUNs) where you domains reside are accessible though multipath and LVM:
>
> # multipath -ll
> # pvs
> # vgs
>
> In case it's a file based storage (NFS/GlusterFS), check that the storage
> domain file system is mounted under /rhev/data-center/mnt
>
> # mount | grep '/rhev/data-center'
>
> On Sun, Jun 25, 2017 at 11:29 AM, JC Clark <jc(a)mcsaipan.net> wrote:
>
>> Dear All,
>>
>> Is there a reason that a perfectly well working Ovirt 4.1 Engine after a
>> power failure, would not allow the hosts to activate because of "VDSM
>> ConnectStorageServerVDS failed". All firewalls are down, I have
>> reinstalled the host, upgraded everything (host and engine), deleted and
>> reinstalled hosts, I can ssh to all from all. Any clues??
>>
>> Thanks ahead of time..
>>
>> --
>> Warm Regards,
>> JC Clark
>> IT Director
>> Mount Carmel School
>> Saipan, CNMI
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> --
> Warm Regards,
>
> JC Clark
> IT Director
> Mount Carmel School
> Saipan, CNMI
> (670) 235-6272 office(670) 483-8684 cell
>
>
7 years, 10 months
VDSM ConnectStorageServerVDS failed
by JC Clark
Dear All,
Is there a reason that a perfectly well working Ovirt 4.1 Engine after a
power failure, would not allow the hosts to activate because of "VDSM
ConnectStorageServerVDS failed". All firewalls are down, I have
reinstalled the host, upgraded everything (host and engine), deleted and
reinstalled hosts, I can ssh to all from all. Any clues??
Thanks ahead of time..
--
Warm Regards,
JC Clark
IT Director
Mount Carmel School
Saipan, CNMI
7 years, 10 months
Change HostedEngine Storage
by Matt .
Hi guys,
When you want to move your hosted_engine storage you can copy stuff
over but you still need to change the image which contains all config
files.
Is there some documentation about how to do so ?
Thanks,
Matt
7 years, 10 months
Info on live snapshot and agent interaction
by Gianluca Cecchi
Hello,
supposing to have a Linux VM with ovirt-guest-agent installed, during a
live snapshot operation it should be freeze of filesystems.
Where to find confirmation of correct/successful interaction?
/var/log/messages or agent log or other kind of files?
Are there any limitations on filesystems that support freeze? Is it
fsfreeze the command executed at VM OS level or any other low level command?
Thanks,
Gianluca
7 years, 10 months
Frustration defines the deployment of Hosted Engine
by Vinícius Ferrão
Hello oVirt folks.
I’m a traitor of the Xen movement and was looking for some good alternatives for XenServer hypervisors. I was aware of KVM for a long time but I was missing a more professional and appliance feeling of the product, and oVirt appears to deliver exactly what I’m looking for.
Don’t get me wrong, I’m not saying that Xen is not good, I’m looking for equal or better alternatives, but I’m starting to get frustrated with oVirt.
Firstly I’ve tried to install the oVirt Node on a VM in VMware Fusion on my notebook, it was a no go. For whatever reasons I don’t know vdsmd.service and libvirtd failed to start. I make sure that I was running with EPT support enabled to achieve nested virtualization, but as I said: it was a no go.
So I’ve decommissioned a XenServer machine that was in production just to try oVirt. The hardware is not new, but’s it’s very capable: Dual Xeon E5506 with 48GB of system RAM, but I can’t get the hosted engine to work, it always insults my hardware: --- Hosted Engine deployment failed: this system is not reliable, please check the issue,fix and redeploy.
It’s definitely a problem on the storage subsystem, the error is just random, at this moment I’ve got:
[ ERROR ] Failed to execute stage 'Misc configuration': [-32605] No response for JSON-RPC StorageDomain.detach request.
But on other tries it came up with something like this:
No response for JSON-RPC Volume.getSize request.
I was thinking that the problem was on the NFSv3 server on our FreeNAS box, so I’ve changed to an iSCSI backend, but the problem continues. This happens at the very end of the ovirt-hosted-engine-setup command, which leads me to believe that’s an oVirt issue. The OVA was already copied and deployed to the storage:
[ INFO ] Starting vdsmd
[ INFO ] Creating Volume Group
[ INFO ] Creating Storage Domain
[ INFO ] Creating Storage Pool
[ INFO ] Connecting Storage Pool
[ INFO ] Verifying sanlock lockspace initialization
[ INFO ] Creating Image for 'hosted-engine.lockspace' ...
[ INFO ] Image for 'hosted-engine.lockspace' created successfully
[ INFO ] Creating Image for 'hosted-engine.metadata' ...
[ INFO ] Image for 'hosted-engine.metadata' created successfully
[ INFO ] Creating VM Image
[ INFO ] Extracting disk image from OVF archive (could take a few minutes depending on archive size)
[ INFO ] Validating pre-allocated volume size
[ INFO ] Uploading volume to data domain (could take a few minutes depending on archive size)
[ INFO ] Image successfully imported from OVF
[ ERROR ] Failed to execute stage 'Misc configuration': [-32605] No response for JSON-RPC StorageDomain.detach request.
[ INFO ] Yum Performing yum transaction rollback
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20170623032541.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue,fix and redeploy
Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20170623023424-o9rbt0.log
At this point I really don’t know what I should try. And the log file is too verborragic (hoping this word exists) to look for errors.
Any guidance?
Thanks,
V.
7 years, 10 months
Dell firmware update problem
by Davide Ferrari
Hello
I'm trying to update the BIOS firmware on a Dell PowerEdge with CentOS
(just upgraded to 7.3) running oVirt 4.0 and it fails with an error
mount: /dev/sdb is already mounted or /tmp/SECUPD busy
The problem is acknoleged by Red Hat and there is a solution for it
https://access.redhat.com/solutions/2671581
but well, I have no RH subscriptions :( Has anyone here encountered the
same problem with CentOS and oVirt? Any hint?
Thanks!
--
Davide
7 years, 10 months
SPICE keymap ?
by Matthias Leopold
hi,
i'm looking for a way to change the SPICE keymap for a VM. i couldn't
find it. i couldn't find a way to change it in the client either (linux
remote-viewer application). this is probably easy, thanks anyway...
matthias
7 years, 10 months
is arbiter configuration needed?
by Erekle Magradze
Hello,
I am using glusterfs as the storage backend for the VM images, volumes
for oVirt consist of three bricks, is it still necessary to configure
the arbiter to be on the safe side? or since the number of bricks is odd
it will be done out of the box?
Thanks in advance
Cheers
Erekle
7 years, 10 months
problems migrating to hosted engine from bare metal
by cmc
Hi,
I created a new host to deploy a hosted engine, and then used a backup
from the bare metal engine and restored this, as per the procedure in:
http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_M...
Everything worked fine up until step 15 ('Continue setup') as the
script said the engine was not responding. I tried the reboot option
(option 3), but still it would not connect. So I could not do the
final step involving the internal CA, adding the host to an existing
cluster (of which there were two other hosts). I was able to connect
via vnc and ssh fine to the engine, and from here I could see that the
ovirt-engine service was up. I had to install the aaa-ldap extension
package to enable ldap auth separately however, but once done I was
able to log in, and it showed the old cluster as it was on the bare
metal engine. I added the host that I created the hosted engine on,
and it installed various packages and then I configured the network
and it looked fine, apart from the fact that I could not see a VM
named 'HostedEngine' in the list of VMs. I think however that this was
not a properly working setup, as the NFS storage I used to setup the
hosted engine became unavailable and I think this killed the hosted
engine, which caused it to reboot the host it was on. The hosted
engine has not come back since then, so I'm guessing it either isn't
properly set up for HA or it needs the NFS storage or something else
was not properly done by me in the setup. I've restarted the bare
metal engine for now as I needed it running for now.
My questions are:
1. My understanding is that the NFS storage is initially used to
create the hosted engine disk image, and is temporary, and that the
hosted engine later gets migrated to the storage used by the rest of
the cluster (which in my case is directly attached to the hosts via
fibre channel). I suspect that this did not happen. The bare metal
engine had some local ISO storage (on a hard disk local to it), which
will not be replicated to the hosted engine VM - will this cause a
problem for the deployment? I can create some new ISO storage later if
not.
2. What is the recommended way to recover from this situation? Should
I just run 'hosted-engine --deploy' again and try and find out what is
going wrong at step 15?
I can probably get the disk image that was on NFS and mount it to find
out what went wrong on the initial deployment, or I can run the
deployment again and then get the log when it fails at step 15.
Ovirt version was 4.1.2.2
Thanks for any help,
Cam
7 years, 10 months
Failed to activate ISO Ovirt 4.1
by rajatjpatel
Hello Team,
I am using Ovirt 4.1 for my production, we are facing issues with ISO
Domain. We are facing issues with activating a ISO domain. Using mount -t
nfs ovirt.fog.com:/var/lib/exports/iso /mnt we are able to mount the same
in all hyp. While using ovirt UI which is giving error.
Pls find attach vdsm & engine logs.
Regards
Rajat
7 years, 10 months
default login info for repository images
by Dan Sullivan
I've created a VM using a template imported from a Fedora 24 image in
the repository. Now that it is created, what credentials do I use to
log into it from the console?
7 years, 10 months
New installation
by david caughey
Hi Folks,
I just got the go ahead to install oVirt to use as a lab.
The servers are:
1xdl360 4x30010k in raid 10 for OS (Manager) should this be clustered with
another server for resiliency
5xdl380 2x30010k for OS 6x1TB7.2k RAID5 on each for a data store
It will all be behind a proxy and be connected with 1GB links, (2x4 bonds)
My plan is to have 1 manager as this is a lab scenario and not production,
(yet), or is it better to have a cluster.
Is it ok to have a data store on each host, (they won't let me have
dedicated storage yet)?
Is it wise to share these data_stores between hosts or should 1 store be
dedicated to each host individually?
There is no need for performance, basically as long as it runs it will work.
The final intention is to have templates for OpenStack and CEPH plus lots
of Linux examples set up with SDN etc.
We have a 90% Windows shop but it is all rapidly changing to OpenStack et
al and I want to try and give people the opportunity to use Linux in the
lab before they are let lose in production.
Plus it gives me the chance to show management exactly what ovirt can do.
Any help, advice or links would be greatly appreciated,
BR/David
7 years, 10 months
