June 2017 - Users - Ovirt List Archives

[Ovirt 4.0.6] Suggestion required for Network Throughput options

by TranceWorldLogic .

Hi, To increase network throughput we have changed txqueuelen of network device and bridge manually. And observed improved throughput. But in ovirt I not see any option to increase txqueuelen. Can someone suggest me what will be the right way to increase throughput ? Note: I am trying to increase throughput for ipsec packets. Thanks, ~Rohit

6 years, 9 months

2
9
0 / 0

add fourth full gluster node and remove arbiter: ovirt 4.1 with hosted engine

by yayo (j)

Hi at all, we have a 3 node cluster with this configuration: ovirtzz 4.1 with 3 node hyperconverged with gluster. 2 node are "full replicated" and 1 node is the arbiter. Now we have a new server to add to cluster then we want to add this new server and remove the arbiter (or, make this new server a "full replicated" gluster with arbiter role? I don't know) Can you please help me to know what is the right way to do this? Or, Can you give me any doc or link that explain the steps to do this? Thank you in advance!

6 years, 9 months

2
9
0 / 0

Storage, extend or new lun ?

by Enrico Becchetti Gmail

Dear All, I've oVirt 3.5.3-1-1.el6 with two kind of storage , NFS and Fibre Channel. Each Hypervisor has HBA controller and Data CLutser has four Storage named: DATA_FC, DATA_NFS, EXPORT and ISO-DOMAIN. Anybody know how can I extend a DATA_FC ? Which is the best practies ? Extend LUN from HP MSA controller or adding a new lun ? if I extend lun inside HP MSA oVirt see the new size ? Enrico Thanks a lot. Best Regards

6 years, 9 months

2
3
0 / 0

HostedEngine VM not visible, but running

by cmc

Hi, I've migrated from a bare-metal engine to a hosted engine. There were no errors during the install, however, the hosted engine did not get started. I tried running: hosted-engine --status on the host I deployed it on, and it returns nothing (exit code is 1 however). I could not ping it either. So I tried starting it via 'hosted-engine --vm-start' and it returned: Virtual machine does not exist But it then became available. I logged into it successfully. It is not in the list of VMs however. Any ideas why the hosted-engine commands fail, and why it is not in the list of virtual machines? Thanks for any help, Cam

6 years, 10 months

7
46
0 / 0

Sound Device Custom Property

by Mauricio Perez

This is a multipart message in MIME format. ------=_NextPart_000_0063_01D2F1A4.D9A2A050 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello Everyone, I am trying to modify a VM sound device sub element to <codec type='micro'/>. I understand the only way to perform this is by using a before vm start vdsm hook to define custom property. Can someone please guide to setting this up. * How would I define it in the engine config? * How do I create the hooking module? * Is there a source to find pre created hooking modules? Thank You All!! ------=_NextPart_000_0063_01D2F1A4.D9A2A050 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1>Hello Everyone,<o:p></o:p><o:p> </o:p>I am trying = to modify a VM sound device sub element to  <codec = type=3D'micro'/>. I understand the only way to perform this is by = using a before vm start vdsm hook to define custom property. Can someone = please guide to setting this up.<o:p></o:p><![if !supportLists]>·         = <![endif]>How would I define it in the engine = config?<o:p></o:p><![if = !supportLists]>·         = <![endif]>How do I create the hooking = module?<o:p></o:p><![if = !supportLists]>·         = <![endif]>Is there a source to find pre created = hooking modules?<o:p></o:p><o:p> </o:p>Thank You = All!!<o:p></o:p></div></body></html> ------=_NextPart_000_0063_01D2F1A4.D9A2A050--

6 years, 10 months

1
0
0 / 0

moVirt 2.0 released!

by Filip Krepinsky

Hello everyone, moVirt 2.0 has just been released and should arrive to your devices soon! You can also get the apk from our GitHub [1]. The main feature of this release is managing multiple oVirt installations + many other cool features [2]. Thanks everybody who helped with testing and especially big thanks to Shira who gave us lots of valuable input. Have a nice day Filip [1]: https://github.com/oVirt/moVirt/releases/tag/v2.0 [2]: https://github.com/oVirt/moVirt/wiki/Changelog

6 years, 10 months

1
0
0 / 0

Help! No VMs start after reboot of cluster

by cmc

Hi, I restarted my 3 host cluster after setting it into global maintenance mode and then shutting down all of the nodes and then bringing them up again. I moved it out of global maintenance mode and no VM is running, including the hosted engine. Any help greatly appreciated! Thanks, Cam

6 years, 10 months

3
5
0 / 0

Re: [ovirt-users] Frustration defines the deployment of Hosted Engine

by Karli Sjöberg

6 years, 10 months

11
16
0 / 0

vm shutdown long delay is a problem for users of pools

by Paul

This is a multipart message in MIME format. ------=_NextPart_000_0079_01D2EB83.89CE5690 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi, Shutting down VM's in the portal with the red downfacing arrow takes quite some time (about 90 seconds). I read this is mainly due to a 60 second delay in the ovirt-guest-agent. I got used to right-click and use "power off" instead of "shutdown", which is fine. My users make use of VM in a VM-pool. They get assigned a VM and after console disconnect the VM shuts down (default recommended behavior). My issue is that the users stays assigned to this VM for the full 90 seconds and cannot do "power off". Suppose he disconnected by accident, he has to wait 90 seconds until he is assigned to the pool again until he can connect to another VM. My questions are: - Is it possible to decrease the time delay of a VM shutdown? 90 seconds is quite a lot, 10 seconds should be enough - Is it possible for normal users to use "power off"? - Is it possible to "unallocate" the user from a VM if it is powering down? So he can allocate another VM Kind regards, Paul ------=_NextPart_000_0079_01D2EB83.89CE5690 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DNL = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1>Hi,<o:p></o:p>Shutting = down VM’s in the portal with the red downfacing arrow takes quite = some time (about 90 seconds). I read this is mainly due to a 60 second = delay in the ovirt-guest-agent. I got used to right-click and use = “power off” instead of “shutdown”, which is = fine.<o:p></o:p><o:p> </o:p>My users = make use of VM in a VM-pool. They get assigned a VM and after console = disconnect the VM shuts down (default recommended behavior). My issue is = that the users stays assigned to this VM for the full 90 seconds and = cannot do “power off”. Suppose he disconnected by accident, = he has to wait 90 seconds until he is assigned to the pool again until = he can connect to another VM. <o:p></o:p><o:p> </o:p>My = questions are:<o:p></o:p><![if = !supportLists]>-          = <![endif]>Is it possible to decrease the time delay of a = VM shutdown? 90 seconds is quite a lot, 10 seconds should be = enough<o:p></o:p><![if = !supportLists]>-          = <![endif]>Is it possible for normal users to use = “power off”?<o:p></o:p><![if !supportLists]>-          = <![endif]>Is it possible to “unallocate” the = user from a VM if it is powering down? So he can allocate another = VM<o:p></o:p><o:p> </o:p>Kind = regards,<o:p></o:p><o:p> </o:p>Paul<o:p></o:p></div></body></html> ------=_NextPart_000_0079_01D2EB83.89CE5690--

6 years, 10 months

3
3
0 / 0

Unable to rename disks via REST API

by Bruno Rodriguez

Hello everyone, I'm having some problems about renaming some disks (setting a different alias, name or description) for VMs disks created from a template. When I get this URL https://ovirt-manager/ovirt-engine/api/disks/0123 I can see are the methods sparsify, export, move and copy. I tried to POST the following XML to the previous URL with no result (as expected, it won't work) <disk> <alias>my_machine_Disk1</alias> </disk> I'm quite sure I'm thinking about it in a wrong way (as usual). Any help would be welcome... Thank you in advance -- Bruno Rodríguez Rodríguez *Port d'Informació Científica (PIC)*

6 years, 10 months

3
9
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users June 2017