VM With Snapshots Marked As Illegal
by Clint Boggio
Greetings oVirt Users;
Environment:
oVirt 4.2.0.2-1
1 Dedicated Engine
6 Hypervisor Nodes
iSCSI Storage
All running CentOS 7.5
I have a VM with the illegal snapshot error. After doing some research
on the condition i have found some methods for fixing the problem by
connecting to the database and repairing the fault. I am unable to
connect to the engine database from the engine command line with the
password in 10-setup-database.conf for whatever reason. (likely user
error)
I don't really need the disk that is attached to this VM that is at
fault as it is a disk that is being utilized by the VM to perform local
backups and that function has been moved to an offsite backup solution.
If I shut down the afflicted VM, then delete the un-needed disk, will
the snapshots be deleteed and thus the problem alleviated ?
Or will the system not delete the un-needed disk because of the fault
and then not reboot because if the illegal statu of the snapshot ?
I have tried to delete the snapshots, and the system refuses to do so.
I may need some guidance regarding connecting to my engine database if
i cannot delete the un-needed disk.
Thank you all for any help in this matter, and if more information is
needed please let me know.
~Clint Boggio
5 years, 1 month
problems getting vGPU working
by cmc
Hi,
I'm having trouble getting my Nvidia vGPU to work on a VM.
Setup: RHEV 4.2 on RHEL 7.5, Tesla M60 (switched to graphics mode).
I'm using the NVIDIA-GRID-RHEL-7.5-410.92-410.91-412.16.zip package
from Nvidia.
On the hypervisor, I've installed the
NVIDIA-vGPU-rhel-7.5-410.91.x86_64 rpm. vfio kernel modules are
loaded, nvidia-smi shows the card, and I can see all the vGPUs via
vdsm-client
I've created a CentOS 7.4 VM and added a 'B' type vGPU instance in
'custom properties'. I've configured gridd.conf to point to the
license server and it reports picking up a license in
/var/log/messages. I installed the driver via the .run file
(NVIDIA-Linux-x86_64-410.92-grid.run). The nvidia kernel module is
loaded, but so also is the 'qxl' paravirtual driver.
lspci reports:
00:02.0 VGA compatible controller: Red Hat, Inc. QXL paravirtual
graphic card (rev 04)
00:07.0 VGA compatible controller: NVIDIA Corporation GM204GL [Tesla
M60] (rev a1)
The Xorg.0.log reports:
[ 1622.212] (--) PCI:*(0:0:2:0) 1b36:0100:1af4:1100 rev 4, Mem @
0xf0000000/134217728, 0xfb000000/8388608, 0xfb870000/8192, I/O @
0x0000c100/32, BIOS @ 0x????????/65536
[ 1622.212] (--) PCI: (0:0:7:0) 10de:13f2:10de:1177 rev 161, Mem @
0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @
0x0000c000/128, BIOS @ 0x????????/131072
[ 1622.212] (II) LoadModule: "glx"
[ 1622.212] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 1622.213] (II) Module glx: vendor="X.Org Foundation"
[ 1622.213] compiled for 1.19.3, module version = 1.0.0
[ 1622.213] ABI class: X.Org Server Extension, version 10.0
[ 1622.213] (II) LoadModule: "nvidia"
[ 1622.214] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 1622.214] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1622.214] compiled for 4.0.2, module version = 1.0.0
[ 1622.214] Module class: X.Org Video Driver
[ 1622.214] (II) NVIDIA dlloader X Driver 410.92 Thu Dec 20 04:48:17 CST 2018
[ 1622.214] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1622.214] (++) using VT number 1
[ 1622.214] (EE) No devices detected.
[ 1622.214] (EE)
Fatal server error:
[ 1622.214] (EE) no screens found(EE)
[ 1622.214] (EE)
Could the qxl module be somehow blocking the nvidia driver? I tried
blacklisting the driver in grub, though that didn't work anyway.
Thanks in advance for any help.
Cam
5 years, 1 month
[ANN] oVirt 4.3.2 First Release Candidate is now available
by Sandro Bonazzola
The oVirt Project is pleased to announce the availability of the oVirt
4.3.2 First Release Candidate, as of March 5th, 2019.
This update is a release candidate of the second in a series of
stabilization updates to the 4.3 series.
This is pre-release software. This pre-release should not to be used in
production.
This release is available now on x86_64 architecture for:
* Red Hat Enterprise Linux 7.6 or later
* CentOS Linux (or similar) 7.6 or later
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
for:
* Red Hat Enterprise Linux 7.6 or later
* CentOS Linux (or similar) 7.6 or later
* oVirt Node 4.3 (available for x86_64 only)
Experimental tech preview for x86_64 and s390x architectures for Fedora 28
is also included.
See the release notes [1] for installation / upgrade instructions and
a list of new features and bugs fixed.
Notes:
- oVirt Guest Tools with new oVirt Windows Guest Agent is available
- oVirt Appliance is available for EL7 only
- oVirt Node is available for EL7 only [2]
- Fedora 28 based appliance and node couldn't be built due to unsigned
glusterfs packages in production repositories.
Additional Resources:
* Read more about the oVirt 4.3.2 release highlights:
http://www.ovirt.org/release/4.3.2/
* Get more oVirt Project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.3.2/
[2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
5 years, 1 month
Error deploy hostsed engine on Centos7 at [ovirt.hosted_engine_setup : Fetch IPv4 CIDR for virbr0]
by shanep＠lifestylepanel.com
Trying to install oVirt hosted engine on a dedicated host in Data Centre. But it keeps failing at what looks to be the point where it is trying to get an IP if virbr0, which has been created successfully during setup, but does not appear to have an ip address.
Any idea what could be going worng?
System is running Centos 7.6.1810
Interface: em1 (public ip)
Interface: em2 management network.
This is the error in the log
[ INFO ] TASK [ovirt.hosted_engine_setup : Fetch IPv4 CIDR for virbr0]
[ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: 'dict object' has no attribute 'ipv4'\n\nThe error appears to have been in '/usr/share/ansible/roles/ovirt.hosted_engine_setup/tasks/bootstrap_local_vm/01_prepare_routing_rules.yml': line 57, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n tags: ['skip_ansible_lint']\n - name: Fetch IPv4 CIDR for {{ virbr_default }}\n ^ here\nWe could be wrong, but this one looks like it might be an issue with\nmissing quotes. Always quote template expression brackets when they\nstart a value. For instance:\n\n with_items:\n - {{ foo }}\n\nShould be written as:\n\n with_items:\n - \"{{ foo }}\"\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook
5 years, 1 month
Advice around ovirt 4.3 / gluster 5.x
by Endre Karlson
Hi, should we downgrade / reinstall our cluster? we have a 4 node cluster
that's breakin apart daily due to the issues with GlusterFS after upgrading
from 4.2.8 that was rock solid. I am wondering why 4.3 was released as a
stable version at all?? **FRUSTRATION**
Endre
5 years, 1 month
oVirt 4.3.0 - deploy Engine from VM
by a.e.pool＠iway.na
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"}
I keep getting this when I try to deploy the Engine VM from the menu. I changed out hardware thinking it might be the culprit, cheked internet connections etc. same old same old
Any assistance will be appreciated.
Thanks,
Andre
5 years, 1 month
low power, low cost glusterfs storage
by Jonathan Baecker
Hello everybody!
Does anyone here have experience with a cheap, energy-saving glusterfs
storage solution? I'm thinking of something that has more power than a
rasbian Pi, 3 x 2 TB (SSD) storage, but doesn't cost much more and
doesn't consume much more power.
Would that be possible? I know the "Red Hat Gluster Storage"
requirements, but are they generally so high? Only a few VM images would
have to be on it...
Greetings
Jonathan
5 years, 1 month
Ovirt VM UserDefinedProperties Option
by Akshita Jain
Dear All,
I'm unable to use tablet device even after setting it as true in UserDefined Properties by typing command : engine-config -s UserDefinedVMProperties='usbtablet=^(true|false)$'.
Can someone please help with this issue
5 years, 1 month
Ovirt VM UserDefinedProperties Option
by Akshita Jain
Dear All,
I'm unable to use tablet device even after setting it as true in UserDefined Properties by typing command : engine-config -s UserDefinedVMProperties='usbtablet=^(true|false)$'.
Can someone please help with this issue
5 years, 1 month
