VMs import over slow 1gig interface instead of fast 10gig interface?
by Jacob Green
Ok, so I want to try and more thoroughly explain my situation. I
want to better understand what is happening, and if there is a way to
force import over the faster connection.
Today I have two Ovirt environments, one on 4.1 and one on 4.2, on
the new environment we have migrated to new VLANs for Management and Data.
The export domain is a NFS domain hosted on a Trunas device that
has an ip address of X.X.12.100.
Our host has multiple Ethernet connections, one Bonded 20Gigabit
interface. That is where we have the ovirtmgmt profile. And a secondary
1 Gigabit interface that we call our VLAN12 profile or server VLAN.
*The problem.... *When importing a VM from the export domain, the import
is happening over the 1Gigabit interface on the VLAN12 profile. Instead
of the 20gigabit Bonded interface on VLAN 100.
*My understanding.... *So I probably just misunderstand how this works,
but here is what I thought should happen, in the *Setup Host Network*
screen for this host I have the ovirtmgmt on VLAN100 with the bonded
20Gigabit interface performing the following. "*Management, Display,
Migration, VM and Default Route*." Then I have the secondary 1 Gigabit
interface just doing "*VM*" on VLAN12. What I thought should happen is
that anything Migration related "*/Includes importing from export
domain?/*" should happen on the Migration interface, which in my case is
the ovritmgmt interface on VLAN100.
I have also confirmed that I can ping from the VLAN100 ovirtmgmt
interface to the storage on VLAN12. So there is connectivity from that
interface to the storage. What I am trying to figure out is there a way
to force it to do imports over the 20Gigabit interface that resides on
VLAN100 instead of the slower VLAN12 interface, that is just there for
general VM connectivity.
Thank you for any advice or guidance on this matter.
--
Jacob Green
Systems Admin
American Alloy Steel
5 years, 12 months
engine-setup failed in upgrade step to 4.3.2 with DNF errors on Centos 7.6
by Oliver Riesener
# engine-setup
```
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20190329154037-huchep.log
Version: otopi-1.8.1 (otopi-1.8.1-1.el7)
[ INFO ] DNF Downloading 1 files, 0.00KB
[ INFO ] DNF Downloaded Extra Packages for Enterprise Linux 7 - x86_64
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup (late)
[ INFO ] Stage: Environment customization
--== PRODUCT OPTIONS ==--
Set up Cinderlib integration
(Currently in tech preview)
(Yes, No) [No]:
[ INFO ] ovirt-provider-ovn already installed, skipping.
--== PACKAGES ==--
[ INFO ] Checking for product updates...
[ ERROR ] DNF 'Base' object has no attribute '_group_persistor'
[ INFO ] DNF Performing DNF transaction rollback
[ ERROR ] Failed to execute stage 'Environment customization': 'Base'
object has no attribute '_group_persistor'
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20190329154037-huchep.log
[ INFO ] Generating answer file
'/var/lib/ovirt-engine/setup/answers/20190329154107-setup.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
What can i do ?
```
6 years
[Users] Lifecycle / upgradepath
by Sven Kieske
Hi Community,
Currently, there is no single document describing supported
(which means: working ) upgrade scenarios.
I think the project has matured enough, to have such an supported
upgradepath, which should be considered in the development of new
releases.
As far as I know, currently it is supported to upgrade
from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z
but not from x.y-1.z to x.y+1.z directly.
maybe this should be put together in a wiki page at least.
also it would be cool to know how long a single "release"
would be supported.
In this context I would define a release as a version
bump from x.y.z to x.y+1.z or to x+1.y.z
a bump in z would be a bugfix release.
The question is, how long will we get bugfix releases
for a given version?
What are your thoughts?
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
6 years
Planned restart of production services
by Evgheni Dereveanchin
Hi everyone,
I will be restarting several production systems within the following hour
to apply updates.
The following services may be unreachable for some period of time:
- resources.ovirt.org - package repositories
- jenkins.ovirt.org - CI master
Package repositories will be unreachable for a short period of time.
No new CI jobs will be started during this period.
I will announce you once maintenance is complete.
--
Regards,
Evgheni Dereveanchin
6 years
[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi
Hello,
I have 2 physical servers with Opteron 2nd gen cpu.
There is CentOS 6.3 installed and some VM already configured on them.
Their /proc/cpuinfo contains
...
model name : Dual-Core AMD Opteron(tm) Processor 8222
...
kvm_amd kernel module is loaded with its default enabled nested option
# systool -m kvm_amd -v
Module = "kvm_amd"
Attributes:
initstate = "live"
refcnt = "15"
srcversion = "43D8067144E7D8B0D53D46E"
Parameters:
nested = "1"
npt = "1"
...
I already configured a fedora 17 VM as a oVirt 3.1 Engine
I'm trying to configure another VM as oVirt 3.1 node with
ovirt-node-iso-2.5.5-0.1.fc17.iso
It seems I'm not able to configure so that ovirt install doesn't complain.
After some attempts, I tried this in my vm.xml for the cpu:
<cpu mode='custom' match='exact'>
<model fallback='allow'>athlon</model>
<vendor>AMD</vendor>
<feature policy='require' name='pni'/>
<feature policy='require' name='rdtscp'/>
<feature policy='force' name='svm'/>
<feature policy='require' name='clflush'/>
<feature policy='require' name='syscall'/>
<feature policy='require' name='lm'/>
<feature policy='require' name='cr8legacy'/>
<feature policy='require' name='ht'/>
<feature policy='require' name='lahf_lm'/>
<feature policy='require' name='fxsr_opt'/>
<feature policy='require' name='cx16'/>
<feature policy='require' name='extapic'/>
<feature policy='require' name='mca'/>
<feature policy='require' name='cmp_legacy'/>
</cpu>
Inside node /proc/cpuinfo becomes
processor : 3
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : QEMU Virtual CPU version 0.12.1
stepping : 3
microcode : 0x1000065
cpu MHz : 3013.706
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni
cx16 hypervisor lahf_lm cmp_legacy cr8_legacy
bogomips : 6027.41
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
2 questions:
1) Is there any combination in xml file to give to my VM so that oVirt
doesn't complain about missing hardware virtualization with this
processor?
2) suppose 1) is not possible in my case and I still want to test the
interface and try some config operations to see for example the
differences with RHEV 3.0, how can I do?
At the moment this complaint about hw virtualization prevents me to
activate the node.
I get
Installing Host f17ovn01. Step: RHEV_INSTALL.
Host f17ovn01 was successfully approved.
Host f17ovn01 running without virtualization hardware acceleration
Detected new Host f17ovn01. Host state was set to Non Operational.
Host f17ovn01 moved to Non-Operational state.
Host f17ovn01 moved to Non-Operational state as host does not meet the
cluster's minimum CPU level. Missing CPU features : CpuFlags
Can I lower the requirements to be able to operate without hw
virtualization in 3.1?
Thanks in advance,
Gianluca
6 years
Need VM run once api
by Chandrahasa S
This is a multipart message in MIME format.
--=_alternative 00361B2065257E90_=
Content-Type: text/plain; charset="US-ASCII"
Hi Experts,
We are integrating ovirt with our internal cloud.
Here we installed cloudinit in vm and then converted vm to template. We
deploy template with initial run parameter Hostname, IP Address, Gateway
and DNS.
but when we power ON initial, run parameter is not getting pushed to
inside the vm. But its working when we power on VM using run once option
on Ovirt portal.
I believe we need to power ON vm using run once API, but we are not able
get this API.
Can some one help on this.
I got reply on this query last time but unfortunately mail got deleted.
Thanks & Regards
Chandrahasa S
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
--=_alternative 00361B2065257E90_=
Content-Type: text/html; charset="US-ASCII"
<font size=2 face="sans-serif">Hi Experts,</font>
<br>
<br><font size=2 face="sans-serif">We are integrating ovirt with our internal
cloud.</font>
<br>
<br><font size=2 face="sans-serif">Here we installed cloudinit in vm and
then converted vm to template. We deploy template with initial run parameter
Hostname, IP Address, Gateway and DNS.</font>
<br>
<br><font size=2 face="sans-serif">but when we power ON initial, run parameter
is not getting pushed to inside the vm. But its working when we power on
VM using run once option on Ovirt portal.</font>
<br>
<br><font size=2 face="sans-serif">I believe we need to power ON vm using
run once API, but we are not able get this API.</font>
<br>
<br><font size=2 face="sans-serif">Can some one help on this.</font>
<br>
<br><font size=2 face="sans-serif">I got reply on this query last time
but unfortunately mail got deleted.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font><p>=====-----=====-----=====<br>
Notice: The information contained in this e-mail<br>
message and/or attachments to it may contain <br>
confidential or privileged information. If you are <br>
not the intended recipient, any dissemination, use, <br>
review, distribution, printing or copying of the <br>
information contained in this e-mail message <br>
and/or attachments to it are strictly prohibited. If <br>
you have received this communication in error, <br>
please notify us by reply e-mail or telephone and <br>
immediately and permanently delete the message <br>
and any attachments. Thank you</p>
<p></p>
--=_alternative 00361B2065257E90_=--
6 years
Re: Fwd: [Gluster-users] Announcing Gluster release 5.5
by Strahil
Hi Darrel,
Will it fix the cluster brick sudden death issue ?
Best Regards,
Strahil NikolovOn Mar 21, 2019 21:56, Darrell Budic <budic(a)onholyground.com> wrote:
>
> This release of Gluster 5.5 appears to fix the gluster 3.12->5.3 migration problems many ovirt users have encountered.
>
> I’ll try and test it out this weekend and report back. If anyone else gets a chance to check it out, let us know how it goes!
>
> -Darrell
>
>> Begin forwarded message:
>>
>> From: Shyam Ranganathan <srangana(a)redhat.com>
>> Subject: [Gluster-users] Announcing Gluster release 5.5
>> Date: March 21, 2019 at 6:06:33 AM CDT
>> To: announce(a)gluster.org, gluster-users Discussion List <gluster-users(a)gluster.org>
>> Cc: GlusterFS Maintainers <maintainers(a)gluster.org>
>>
>> The Gluster community is pleased to announce the release of Gluster
>> 5.5 (packages available at [1]).
>>
>> Release notes for the release can be found at [3].
>>
>> Major changes, features and limitations addressed in this release:
>>
>> - Release 5.4 introduced an incompatible change that prevented rolling
>> upgrades, and hence was never announced to the lists. As a result we are
>> jumping a release version and going to 5.5 from 5.3, that does not have
>> the problem.
>>
>> Thanks,
>> Gluster community
>>
>> [1] Packages for 5.5:
>> https://download.gluster.org/pub/gluster/glusterfs/5/5.5/
>>
>> [2] Release notes for 5.5:
>> https://docs.gluster.org/en/latest/release-notes/5.5/
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users(a)gluster.org
>> https://lists.gluster.org/mailman/listinfo/gluster-users
>
>
6 years
[Users] importing from kvm into ovirt
by Jonathan Horne
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/plain; charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I need to import a kvm virtual machine from a standalone kvm into my ovirt =
cluster. Standalone is using local storage, and my ovirt cluster is using =
iscsi. Can i please have some advice on whats the best way to get this sys=
tem into ovirt?
Right now i see it as copying the .img file to somewhere=85 but i have no i=
dea where to start. I found this directory on one of my ovirt nodes:
/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v=
ms
But inside is just directories that appear to have uuid-type of names, and =
i can't tell what belongs to which vm.
Any advice would be greatly appreciated.
Thanks,
jonathan
________________________________
This is a PRIVATE message. If you are not the intended recipient, please de=
lete without copying and kindly advise us by e-mail of the mistake in deliv=
ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO=
POS to any order or other contract unless pursuant to explicit written agre=
ement or government initiative expressly permitting the use of e-mail for s=
uch purpose.
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/html; charset="Windows-1252"
Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net>
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
252">
</head>
<body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font=
-family:Calibri,sans-serif">
<div>
<div>
<div>I need to import a kvm virtual machine from a standalone kvm into my o=
virt cluster. Standalone is using local storage, and my ovirt cluster=
is using iscsi. Can i please have some advice on whats the best way =
to get this system into ovirt?</div>
</div>
</div>
<div><br>
</div>
<div>Right now i see it as copying the .img file to somewhere=85 but i have=
no idea where to start. I found this directory on one of my ovirt no=
des:</div>
<div><br>
</div>
<div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas=
ter/vms</div>
<div><br>
</div>
<div>But inside is just directories that appear to have uuid-type of names,=
and i can't tell what belongs to which vm.</div>
<div><br>
</div>
<div>Any advice would be greatly appreciated.</div>
<div><br>
</div>
<div>Thanks,</div>
<div>jonathan</div>
<br>
<hr>
<font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I=
f you are not the intended recipient, please delete without copying and kin=
dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con=
tent, this e-mail shall not operate to
bind SKOPOS to any order or other contract unless pursuant to explicit wri=
tten agreement or government initiative expressly permitting the use of e-m=
ail for such purpose.</font>
</body>
</html>
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--
6 years
Upgraded ovirt-4.2 to ovirt-4.3 and VM run fails
by Gobinda Das
Hi,
I have upgraded ovirt-4.2 to ovirt-4.3 and after upgrade while starting
vms giving me error:
Cannot run VM. There is no host that satisfies current scheduling
constraints. See below for details: The host *node1.test.com
<http://node1.test.com>* did not satisfy internal filter
ClusterInMaintenance because the cluster is in maintenance and only highly
available VMs are allowed to start. The host *node2.test.com
<http://node2.test.com>* did not satisfy internal filter
ClusterInMaintenance because the cluster is in maintenance and only highly
available VMs are allowed to start. The host *node3.test.com
<http://node3.test.com>* did not satisfy internal filter
ClusterInMaintenance because the cluster is in maintenance and only highly
available VMs are allowed to start.
Eventhough cluster is not in maintenance mode.
This setup is using gluster6 for storage.
--
Thanks,
Gobinda
6 years
