Re: Self-hosted engine 4.5.0 deployment fails
by John
I would run the deploy again, wait until the engine is up and then from
the server you are deploying the engine on
# virsh list
obtain the virtual machine number from the above command, in the example
below we assume the number is 1
# virsh console 1
login as root
wait for all packages to finish updating:
tail -f /var/log/dnf.rpm.log
then:
# dnf downgrade postgresql-jdbc
once that's done the deployment of the engine should get past the
[ INFO ] TASK [ovirt.ovirt.engine_setup : Check if Engine health page is
up]
step.
On 03/05/2022 17:03, Mohamed Roushdy wrote:
>
> Hello,
>
> I’m deploying on Ovirt nodes v4.5.0.1, but it fails to deploy the
> self-hosted engine with the following errors in the web installer:
>
> [ INFO ] skipping: [localhost]
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Check if Engine health page
> is up]
> [ ERROR ] fatal: [localhost -> 192.168.222.197]: FAILED! =>
> {"attempts": 30, "changed": false, "connection": "close",
> "content_encoding": "identity", "content_length": "86",
> "content_type": "text/html; charset=UTF-8", "date": "Tue, 03 May 2022
> 15:57:20 GMT", "elapsed": 0, "msg": "Status code was 500 and not
> [200]: HTTP Error 500: Internal Server Error", "redirected": false,
> "server": "Apache/2.4.37 (centos) OpenSSL/1.1.1k
> mod_auth_gssapi/1.6.1", "status": 500, "url":
> http://localhost/ovirt-engine/services/health}
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files]
> [ INFO ] changed: [localhost -> 192.168.222.197]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Sync on engine machine]
> [ INFO ] changed: [localhost -> 192.168.222.197]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set destination
> directory path]
> [ INFO ] ok: [localhost -> localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create destination
> directory]
> [ INFO ] changed: [localhost -> localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Find the local
> appliance image]
> [ INFO ] ok: [localhost -> localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local_vm_disk_path]
> [ INFO ] ok: [localhost -> localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Give the vm time to
> flush dirty buffers]
> [ INFO ] ok: [localhost -> localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Copy engine logs]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Change ownership of
> copied engine logs]
> [ INFO ] changed: [localhost -> localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Notify the user about
> a failure]
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
> "There was a failure deploying the engine on the local engine VM. The
> system may not be provisioned according to the playbook results:
> please check the logs for the issue, fix accordingly or re-deploy from
> scratch.\n"}
>
> Any idea if this is a bug or something? I tried to deploy for eight
> times with different configuration
>
> Thank y9ou,
>
>
> _______________________________________________
> Users mailing list --users(a)ovirt.org
> To unsubscribe send an email tousers-leave(a)ovirt.org
> Privacy Statement:https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/
> List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/XL...
10 months
Changing the Cluster Compatibility Version in hyperconverged environment
by lexxthefox＠gmail.com
Hi!
I'm sorry if it is a noob question but it is very important for me.
We are researching oVirt in our company and hope to use existing environment where there's no SAN/NAS solution. Just a bunch of servers. We were able to set up a hyperconverged installation with oVirt 4.4 a while ago and now I'm resuming research and trying to upgrade it to 4.5. I was able to upgrade HE and Hosts. What's left is to upgrade Cluster Compatibility Version from 4.5 to 4.7. I don't seem to find a way to do it as when I try to Edit cluster I get this error: "Cluster Compatibility Version".
Upgrade Guide on https://www.ovirt.org/documentation/upgrade_guide/ does not have entries for hyperconverged set up. So I don't know where to look for information on this topic.
Is it possible to achieve my goal at all? Can "frozen" Cluster Compatibility Version cause problems in the long run?
I can rebuild the whole setup now when it is still being reviewed and planed. But if we start using it actively it won't be possible. I'm afraid that this could be a show-stopper in the long run.
Thanks in advance!
10 months, 1 week
oVirt + TrueNAS: Unable to create iSCSI domain - I am missing something obvious
by David Johnson
Good morning folks, and thank you in advance.
I am working on migrating my oVirt backing store from NFS to iSCSI.
*oVirt Environment:*
oVirt Open Virtualization Manager
Software Version:4.4.4.7-1.el8
*TrueNAS environment:*
FreeBSD truenas.local 12.2-RELEASE-p11 75566f060d4(HEAD) TRUENAS amd64
The iSCSI share is on a TrueNAS server, exposed to user VDSM and group 36.
oVirt sees the targeted share, but is unable to make use of it.
The latest issue is "Error while executing action New SAN Storage Domain:
Volume Group block size error, please check your Volume Group
configuration, Supported block size is 512 bytes."
As near as I can tell, oVirt does not support any block size other than 512
bytes, while TrueNAS's smallest OOB block size is 4k.
I know that oVirt on TrueNAS is a common configuration, so I expect I am
missing something really obvious here, probably a TrueNAS configuration
needed to make TrueNAS work with 512 byte blocks.
Any advice would be helpful.
*David Johnson*
10 months, 1 week
update path from 4.4.4 to 4.5.4
by marek
hi,
i have standalone ovirt-engine 4.4.4 (centos8 stream)
few hosts (mix of old centos 8.2, centos 8 stream, rocky linux)
can you confirm if this upgrade path is ok?
first round
- update engine to 4.4.10
- update OS on engine to last centos 8 stream (can i upgrade to some
point in time recommended for 4.4.10?)
- update hosts to ovirt 4.4.10
- update OS on hosts to last centos 8 stream and rocky linux 8.6
special case in first round - centos 8.2
- migrate OS on hosts from centos 8.2 to rocky linux 8.6
- update hosts to ovirt 4.4.10
second round
- update engine to 4.5.4
- update hosts to ovirt 4.5.4
- update OS on hosts - centos 8 stream - is ALREADY on last update from
first round
- update OS on hosts - rocky linux - from 8.6 to 8.7
Marek
10 months, 2 weeks
noVNC console error : Something went wrong, connection is closed
by dvx.mellin＠gmail.com
Hello everyone,
Context :
oVirt 4.4.9.3-1.el8
glusterfs 8.6
Self-hosted engine
Problem:
Since I update my certificates (with engine-setup) because of the warning that my certs will expire soon, I can't open the noVNC console anymore.
In the logs on engine, I have these :
in /var/log/messages :
ovsdb-server[510110]: ovs|04628|jsonrpc|WARN|ssl:[::ffff:<ip_node_1>]:51214: receive error: Protocol error
ovsdb-server[510110]: ovs|04629|reconnect|WARN|ssl:[::ffff:<ip_node_1>]:51214: connection dropped (Protocol error)
journal[516217]: 2022-12-21 11:31:27,800+0100 ovirt-websocket-proxy: INFO msg:871 handler exception: [SSL: SSLV3_ALERT_CERTIFICATE_UNKNOWN] sslv3 alert certificate unknown (_ssl.c:897)
ovirt-websocket-proxy.py[509812]: ovirt-websocket-proxy[516217] INFO msg:871 handler exception: [SSL: SSLV3_ALERT_CERTIFICATE_UNKNOWN] sslv3 alert certificate unknown (_ssl.c:897)
ovsdb-server[510110]: ovs|04632|stream_ssl|WARN|SSL_accept: error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed
in /var/log/openvswitch/ovsdb-server-sb.log :
2022-12-21T10:31:22.540Z|04626|stream_ssl|WARN|SSL_accept: error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed
2022-12-21T10:31:22.541Z|04627|jsonrpc|WARN|Dropped 1 log messages in last 8 seconds (most recently, 8 seconds ago) due to excessive rate
2022-12-21T10:31:22.541Z|04628|jsonrpc|WARN|ssl:[::ffff:<ip_node_1>]:51214: receive error: Protocol error
2022-12-21T10:31:22.542Z|04629|reconnect|WARN|ssl:[::ffff:<ip_node_1>]:51214: connection dropped (Protocol error)
I've tried these commands (found here : https://access.redhat.com/solutions/6877501) :
/usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh --name="ovirt-provider-ovn" --password=mypass --subject="<subject_engine>" --keep-key
/usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh --name="ovn-ndb" --password=mypass --subject="<subject_engine>" --keep-key
/usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh --name="ovn-sdb" --password=mypass --subject="<subject_engine>" --keep-key
systemctl restart ovirt-provider-ovn.service
systemctl restart ovn-northd.service
Still not work, so I've seen that some certificates was still not renewed :
/usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh --name="vmconsole-proxy-helper" --password=mypass --subject="<subject_engine>" --keep-key
/usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh --name="vmconsole-proxy-host" --password=mypass --subject="<subject_engine>" --keep-key
/usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh --name="vmconsole-proxy-user" --password=mypass --subject="<subject_engine>" --keep-key
And restart every ovirt services.
But it still does not work better.
I don't see any other unvalid certificates in /etc/pki/ovirt-engine/certs/, so I don't know which certificate is invalid for ovsdb.
Thanks for any advice.
Best regards,
Michael
10 months, 4 weeks
Re: Expand the disk space of the hosting engine
by ziyi Liu
Thank you very much, I know the operation steps, but there is still one point that I don’t quite understand, fdisk -l only shows 50G, the actual disk allocation has 100G, how can I display the remaining 50G.
The second question is that if the allocated 100G is also full, how should I expand it? I can’t expand it using wei ui
10 months, 4 weeks
Re: Expand the disk space of the hosting engine
by Jorge Visentini
Hi guys.
So... the problem is that we can't extend the virtual disk on oVirt... "*Cannot
edit Virtual Disk. The operation is not supported for HOSTED_ENGINE disks.*"
In my case I also created a 100GB Domain Storage, but the disk is only 58GB
and I can't increase it...
Em qui., 29 de dez. de 2022 às 18:53, Matthew.Stier(a)fujitsu.com <
Matthew.Stier(a)fujitsu.com> escreveu:
> If you used the default image for your self-hosted-engine, it will create
> the disk of the size you specified, (50GB) but only allocate the space it
> actually requires.
>
> This means the remaining space on the allocated disk, is there, unused.
>
> Since it setup with LVM, you can use 'fdisk' to create a partition of that
> unused space.
>
> Use pvcreate to add that partition to LVM,
>
> Use vgextend to extend the appropriate volume group
>
> Use lvextend to extend the appropriate logical volume, and file-system.
>
>
>
> -----Original Message-----
> From: ziyi Liu <lzy19930211(a)gmail.com>
> Sent: Thursday, December 29, 2022 10:13 AM
> To: users(a)ovirt.org
> Subject: [ovirt-users] Expand the disk space of the hosting engine
>
> Now my hosting engine /var directory is full, and the 15G free space is
> fully occupied. When creating the hosting engine, I use 100G, but actually
> only use 50G. What can I do to make /var bigger?
> disk expansion
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/V7UKBE5SJPH...
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/XKZDIQR77TF...
>
--
Att,
Jorge Visentini
+55 55 98432-9868
11 months
Split hosts in a new engine - oVirt 4.4.5
by francesco＠shellrent.com
Hello everyone!
We have less than 500 hosts and ~800 vms handled by our engine and we could benefit from deploy another engine for splitting the workload (in ex.:we perform daily and weekly backup via python script, scheduled snapshot (dell+add). Is there any way for migrating/moving a host from an engine to a new one (same version, ofc)?
I thought about export a backup and then import but then I'll have to "select" whihch host to import and remove all the structure (DC/cluster/host/storoge) from the old one... a bit tricky and dangerous, in my opinion.
Anyone that has already done this?
Thank you for your time and happy holidays!
Francesco
11 months
Expand the disk space of the hosting engine
by ziyi Liu
Now my hosting engine /var directory is full, and the 15G free space is fully occupied. When creating the hosting engine, I use 100G, but actually only use 50G. What can I do to make /var bigger?
disk expansion
11 months
USB Redirection - Auto choose devices
by jamie.briscoe＠johnstonnc.com
Is there a way to auto choose which devices get redirected the the guest? I have a Windows 2022 VM and I can connect to is using the VM portal and Spice (virt-viewer) and it opens fullscreen perfectly. Perfect VDI solution... Except the fact that I have to click in the top menu and choose my usb devices every time I connect to the vm... I need it to save my selections... Any way to do this?
11 months
