Re: [ovirt-announce] [ovirt-users] [ANN] oVirt 4.1.5 General Availability Release is now available
by Lev Veyde
Hi Michal,
Take a look at i.e.
http://plain.resources.ovirt.org/pub/ovirt-4.1/rpm/el7/noarch/
There are multiple versions of packages there.
Please note that yum by default will hide all but the most recent version.
Thanks in advance,
On Tue, Aug 29, 2017 at 1:24 PM, Michal Skrivanek <
michal.skrivanek(a)redhat.com> wrote:
>
> On 29 Aug 2017, at 12:17, Lev Veyde <lveyde(a)redhat.com> wrote:
>
> Hi Michal,
>
> Actually you can manually install the packages from earlier (sub-)versions
> since these are still in the repo,
>
>
> Hi Lev,
> ah, ok. where did they go if they are not in the repos pulled in by the
> ovirt-release41.rpm?
>
> however I don't really see the reason to do so.
> Once the new stable version is released it's recommended to install that
> version.
>
>
> sure, but normally you do not remove things from repository, you just add
> new versions next to the old ones
>
>
> Do you think it can be usable to actually maintain separate repos for each
> sub-versions that we release? E.g. 4.1.1, 4.1.2, etc. etc. ?
> If so, for which practical use ?
>
>
> No, I just think that modifying history is not a good idea and the repo
> should be as any other repo with all files available during the intended
> life of the release, so in this case whole 4.1.z
>
> Thanks,
> michal
>
>
> Thanks in advance,
>
> On Tue, Aug 29, 2017 at 10:52 AM, Michal Skrivanek <
> michal.skrivanek(a)redhat.com> wrote:
>
>>
>> On 22 Aug 2017, at 16:45, Lev Veyde <lveyde(a)redhat.com> wrote:
>>
>>
>> The oVirt Project is pleased to announce the availability of the General
>> Availability
>> Release of oVirt 4.1.5, as of August 22nd, 2017
>>
>> This update is the fifth in a series of stabilization updates to the 4.1
>> series.
>> 4.1.5 brings more than 20 enhancements and more than 90 bugfixes,
>> including more than 40 high or urgent
>> severity fixes, on top of oVirt 4.1 series
>>
>>
>> I was a bit surprised to find out that the repo content is always
>> replaced. There is no way how to install 4.1.4 anymore? Or any package from
>> 4.1.4.
>> This sounds quite unusual
>>
>>
>> Starting 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a
>> real performance boost for ovirt when using GlusterFS .
>> Due to a known issue [6], using this will break live storage migration.
>> This is expected to be fixed soon. If you do not use live storage
>> migration you can give it a try. Use [7] for more details on how to enable
>> it.
>>
>> This release is available now for:
>> * Fedora 24 (tech preview)
>>
>>
>> do we still want to say that when F24 is EOL?
>>
>> * Red Hat Enterprise Linux 7.3 or later
>>
>>
>> I know “or later” covers that, but it might make sense to explicitly
>> mention RHEL 7.4 is the tested baseline
>>
>> Thanks,
>> michal
>>
>> * CentOS Linux (or similar) 7.3 or later
>>
>> This release supports Hypervisor Hosts running:
>> * Red Hat Enterprise Linux 7.3 or later
>>
>> * CentOS Linux (or similar) 7.3 or later
>> * oVirt Node 4.1
>> * Fedora 24 (tech preview)
>>
>> See the release notes draft [3] for installation / upgrade instructions
>> and
>> a list of new features and bugs fixed.
>>
>> Notes:
>> - oVirt Appliance is already available
>> - oVirt Live is already available[4]
>> - oVirt Node is already available[4]
>>
>> Additional Resources:
>> * Read more about the oVirt 4.1.5 release highlights:
>> http://www.ovirt.org/release/4.1.5/
>> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt
>> * Check out the latest project news on the oVirt blog:
>> http://www.ovirt.org/blog/
>>
>> [1] https://www.ovirt.org/community/
>> [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt
>> [3] http://www.ovirt.org/release/4.1.5/
>> [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/
>> [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.0bet
>> a1/Features/libgfapi/
>> [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562
>> [7] http://www.ovirt.org/develop/release-management/features/sto
>> rage/glusterfs-storage-domain/
>>
>>
>> Thanks in advance,
>> --
>>
>> Lev Veyde
>>
>> Software Engineer, RHCE | RHCVA | MCITP
>> Red Hat Israel
>>
>> <https://www.redhat.com/>
>>
>> lev(a)redhat.com | lveyde(a)redhat.com
>> <https://red.ht/sig>
>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>
>
> --
>
> Lev Veyde
>
> Software Engineer, RHCE | RHCVA | MCITP
> Red Hat Israel
>
> <https://www.redhat.com/>
>
> lev(a)redhat.com | lveyde(a)redhat.com
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>
>
>
--
Lev Veyde
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
7 years, 2 months
Re: [ovirt-announce] [ovirt-users] [ANN] oVirt 4.1.5 General Availability Release is now available
by Lev Veyde
Hi Michal,
Actually you can manually install the packages from earlier (sub-)versions
since these are still in the repo, however I don't really see the reason to
do so.
Once the new stable version is released it's recommended to install that
version.
Do you think it can be usable to actually maintain separate repos for each
sub-versions that we release? E.g. 4.1.1, 4.1.2, etc. etc. ?
If so, for which practical use ?
Thanks in advance,
On Tue, Aug 29, 2017 at 10:52 AM, Michal Skrivanek <
michal.skrivanek(a)redhat.com> wrote:
>
> On 22 Aug 2017, at 16:45, Lev Veyde <lveyde(a)redhat.com> wrote:
>
>
> The oVirt Project is pleased to announce the availability of the General
> Availability
> Release of oVirt 4.1.5, as of August 22nd, 2017
>
> This update is the fifth in a series of stabilization updates to the 4.1
> series.
> 4.1.5 brings more than 20 enhancements and more than 90 bugfixes,
> including more than 40 high or urgent
> severity fixes, on top of oVirt 4.1 series
>
>
> I was a bit surprised to find out that the repo content is always
> replaced. There is no way how to install 4.1.4 anymore? Or any package from
> 4.1.4.
> This sounds quite unusual
>
>
> Starting 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a real
> performance boost for ovirt when using GlusterFS .
> Due to a known issue [6], using this will break live storage migration.
> This is expected to be fixed soon. If you do not use live storage
> migration you can give it a try. Use [7] for more details on how to enable
> it.
>
> This release is available now for:
> * Fedora 24 (tech preview)
>
>
> do we still want to say that when F24 is EOL?
>
> * Red Hat Enterprise Linux 7.3 or later
>
>
> I know “or later” covers that, but it might make sense to explicitly
> mention RHEL 7.4 is the tested baseline
>
> Thanks,
> michal
>
> * CentOS Linux (or similar) 7.3 or later
>
> This release supports Hypervisor Hosts running:
> * Red Hat Enterprise Linux 7.3 or later
>
> * CentOS Linux (or similar) 7.3 or later
> * oVirt Node 4.1
> * Fedora 24 (tech preview)
>
> See the release notes draft [3] for installation / upgrade instructions and
> a list of new features and bugs fixed.
>
> Notes:
> - oVirt Appliance is already available
> - oVirt Live is already available[4]
> - oVirt Node is already available[4]
>
> Additional Resources:
> * Read more about the oVirt 4.1.5 release highlights:
> http://www.ovirt.org/release/4.1.5/
> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt
> * Check out the latest project news on the oVirt blog:
> http://www.ovirt.org/blog/
>
> [1] https://www.ovirt.org/community/
> [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt
> [3] http://www.ovirt.org/release/4.1.5/
> [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/
> [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.
> 0beta1/Features/libgfapi/
> [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562
> [7] http://www.ovirt.org/develop/release-management/features/
> storage/glusterfs-storage-domain/
>
>
> Thanks in advance,
> --
>
> Lev Veyde
>
> Software Engineer, RHCE | RHCVA | MCITP
> Red Hat Israel
>
> <https://www.redhat.com/>
>
> lev(a)redhat.com | lveyde(a)redhat.com
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
--
Lev Veyde
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
7 years, 2 months
[ANN] oVirt 4.1.5 Third Release Candidate is now available
by Sandro Bonazzola
The oVirt Project is pleased to announce the availability of the Third
Release Candidate of oVirt 4.1.5 for testing, as of August 10th, 2017
This is pre-release software. Please take a look at our community page[1]
to know how to ask questions and interact with developers and users.
All issues or bugs should be reported via oVirt Bugzilla[2].
This pre-release should not to be used in production.
This update is the third release candidate of the fifth in a series of
stabilization updates to the 4.1 series.
4.1.5 brings more than 20 enhancements and more than 90 bugfixes,
including more than 30 high or urgent
severity fixes, on top of oVirt 4.1 series
This release is available now for:
* Fedora 24 (tech preview)
* Red Hat Enterprise Linux 7.3 or later
* CentOS Linux (or similar) 7.3 or later
This release supports Hypervisor Hosts running:
* Red Hat Enterprise Linux 7.3 or later
* CentOS Linux (or similar) 7.3 or later
* oVirt Node 4.1
* Fedora 24 (tech preview)
See the release notes draft [3] for installation / upgrade instructions and
a list of new features and bugs fixed.
Notes:
- oVirt Appliance is already available
- oVirt Live is already available[4]
- oVirt Node is already available[4]
Additional Resources:
* Read more about the oVirt 4.1.5 release highlights:
http://www.ovirt.org/release/4.1.5/
* Get more oVirt Project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] https://www.ovirt.org/community/
[2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt
[3] http://www.ovirt.org/release/4.1.5/
[4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
7 years, 3 months
[ANN] oVirt 4.1.5 Second Release Candidate is now available
by Sandro Bonazzola
The oVirt Project is pleased to announce the availability of the Second
Release Candidate of oVirt 4.1.5 for testing, as of August 4th, 2017
This is pre-release software. Please take a look at our community page[1]
to know how to ask questions and interact with developers and users.
All issues or bugs should be reported via oVirt Bugzilla[2].
This pre-release should not to be used in production.
This update is the second release candidate of the fifth in a series of
stabilization updates to the 4.1 series.
4.1.5 brings more than 20 enhancements and more than 50 bugfixes,
including more than 20 high or urgent
severity fixes, on top of oVirt 4.1 series
This release is available now for:
* Fedora 24 (tech preview)
* Red Hat Enterprise Linux 7.3 or later
* CentOS Linux (or similar) 7.3 or later
This release supports Hypervisor Hosts running:
* Red Hat Enterprise Linux 7.3 or later
* CentOS Linux (or similar) 7.3 or later
* oVirt Node 4.1
* Fedora 24 (tech preview)
See the release notes draft [3] for installation / upgrade instructions and
a list of new features and bugs fixed.
Notes:
- oVirt Appliance is already available
- oVirt Live is already available[4]
- oVirt Node is already available[4]
Additional Resources:
* Read more about the oVirt 4.1.5 release highlights:
http://www.ovirt.org/release/4.1.5/
* Get more oVirt Project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] https://www.ovirt.org/community/
[2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt
[3] http://www.ovirt.org/release/4.1.5/
[4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
7 years, 3 months