[ANN] oVirt 4.4.9 First Release Candidate is now available for testing
by Sandro Bonazzola
oVirt 4.4.9 First Release Candidate is now available for testing
The oVirt Project is pleased to announce the availability of oVirt 4.4.9
First Release Candidate for testing, as of September 16th, 2021.
This update is the ninth in a series of stabilization updates to the 4.4
series.
Documentation
-
If you want to try oVirt as quickly as possible, follow the instructions
on the Download <https://ovirt.org/download/> page.
-
For complete installation, administration, and usage instructions, see
the oVirt Documentation <https://ovirt.org/documentation/>.
-
For upgrading from a previous version, see the oVirt Upgrade Guide
<https://ovirt.org/documentation/upgrade_guide/>.
-
For a general overview of oVirt, see About oVirt
<https://ovirt.org/community/about.html>.
Important notes before you try it
Please note this is a pre-release build.
The oVirt Project makes no guarantees as to its suitability or usefulness.
This pre-release must not be used in production.
Installation instructions
For installation instructions and additional information please refer to:
https://ovirt.org/documentation/
This release is available now on x86_64 architecture for:
* Red Hat Enterprise Linux 8.4 or similar
* CentOS Stream 8
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
for:
* Red Hat Enterprise Linux 8.4 or similar
* CentOS Stream 8
* oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only)
See the release notes [1] for installation instructions and a list of new
features and bugs fixed.
Notes:
- oVirt Appliance is already available based on CentOS Stream 8
- oVirt Node NG is already available based on CentOS Stream 8
Additional Resources:
* Read more about the oVirt 4.4.9 release highlights:
http://www.ovirt.org/release/4.4.9/
* Get more oVirt project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.4.9/
[2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
3 years, 1 month
oVirt Node 4.4.8.3 Async update
by Sandro Bonazzola
oVirt Node 4.4.8.3 Async update
On September 3rd 2021 the oVirt project released an async update for oVirt
Node consuming the following packages:
-
ovirt-release44 4.4.8.3
-
ovirt-node-ng-image-update 4.4.8.3
oVirt Node respin also consumed most recent CentOS Stream and Advanced
Virtualization content.
It also includes fixes for:
-
Bug 1996602 <https://bugzilla.redhat.com/show_bug.cgi?id=1996602> - VM
remains in paused state when trying to write on a resized disk resides on
iscsi
-
Via qemu-kvm-6.0.0-29.el8s which shipped live.
Here’s the full list of changes:
--- ovirt-node-ng-image-4.4.8.2.manifest-rpm 2021-09-01 12:59:05.195037688
+0200
+++ ovirt-node-ng-image-4.4.8.3.manifest-rpm 2021-09-03 13:27:52.006368887
+0200
@@ -47 +46,0 @@
-boost-iostreams-1.66.0-10.el8.x86_64
@@ -112 +111 @@
-device-mapper-persistent-data-0.9.0-1.el8.x86_64
+device-mapper-persistent-data-0.9.0-4.el8.x86_64
@@ -355 +354 @@
-libcap-2.26-4.el8.x86_64
+libcap-2.26-5.el8.x86_64
@@ -637 +636 @@
-osinfo-db-20210215-1.el8.noarch
+osinfo-db-20210809-1.el8.noarch
@@ -648 +647 @@
-ovirt-node-ng-image-update-placeholder-4.4.8.2-1.el8.noarch
+ovirt-node-ng-image-update-placeholder-4.4.8.3-1.el8.noarch
@@ -656,2 +655,2 @@
-ovirt-release-host-node-4.4.8.2-1.el8.noarch
-ovirt-release44-4.4.8.2-1.el8.noarch
+ovirt-release-host-node-4.4.8.3-1.el8.noarch
+ovirt-release44-4.4.8.3-1.el8.noarch
@@ -768 +767 @@
-python3-eventlet-0.25.2-3.el8.noarch
+python3-eventlet-0.25.2-3.1.el8.noarch
@@ -814 +813 @@
-python3-os-brick-4.0.3-1.el8.noarch
+python3-os-brick-4.0.3-2.el8.noarch
@@ -890,14 +889,14 @@
-qemu-guest-agent-6.0.0-27.el8s.x86_64
-qemu-img-6.0.0-27.el8s.x86_64
-qemu-kvm-6.0.0-27.el8s.x86_64
-qemu-kvm-block-curl-6.0.0-27.el8s.x86_64
-qemu-kvm-block-gluster-6.0.0-27.el8s.x86_64
-qemu-kvm-block-iscsi-6.0.0-27.el8s.x86_64
-qemu-kvm-block-rbd-6.0.0-27.el8s.x86_64
-qemu-kvm-block-ssh-6.0.0-27.el8s.x86_64
-qemu-kvm-common-6.0.0-27.el8s.x86_64
-qemu-kvm-core-6.0.0-27.el8s.x86_64
-qemu-kvm-docs-6.0.0-27.el8s.x86_64
-qemu-kvm-hw-usbredir-6.0.0-27.el8s.x86_64
-qemu-kvm-ui-opengl-6.0.0-27.el8s.x86_64
-qemu-kvm-ui-spice-6.0.0-27.el8s.x86_64
+qemu-guest-agent-6.0.0-29.el8s.x86_64
+qemu-img-6.0.0-29.el8s.x86_64
+qemu-kvm-6.0.0-29.el8s.x86_64
+qemu-kvm-block-curl-6.0.0-29.el8s.x86_64
+qemu-kvm-block-gluster-6.0.0-29.el8s.x86_64
+qemu-kvm-block-iscsi-6.0.0-29.el8s.x86_64
+qemu-kvm-block-rbd-6.0.0-29.el8s.x86_64
+qemu-kvm-block-ssh-6.0.0-29.el8s.x86_64
+qemu-kvm-common-6.0.0-29.el8s.x86_64
+qemu-kvm-core-6.0.0-29.el8s.x86_64
+qemu-kvm-docs-6.0.0-29.el8s.x86_64
+qemu-kvm-hw-usbredir-6.0.0-29.el8s.x86_64
+qemu-kvm-ui-opengl-6.0.0-29.el8s.x86_64
+qemu-kvm-ui-spice-6.0.0-29.el8s.x86_64
@@ -934,2 +933,2 @@
-selinux-policy-3.14.3-78.el8.noarch
-selinux-policy-targeted-3.14.3-78.el8.noarch
+selinux-policy-3.14.3-79.el8.noarch
+selinux-policy-targeted-3.14.3-79.el8.noarch
@@ -1007 +1006 @@
-virt-v2v-1.42.0-14.el8s.x86_64
+virt-v2v-1.42.0-15.el8s.x86_64
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
3 years, 2 months
[ANN] oVirt 4.4.8 Async update #2
by Sandro Bonazzola
oVirt 4.4.8 Async update #2
On September 1st 2021 the oVirt project released an async update to the
following packages:
-
ovirt-release44 4.4.8.2
-
vdsm 4.40.80.6
Fixing the following bugs:
-
Bug 1999032 <https://bugzilla.redhat.com/show_bug.cgi?id=1999032> -
Failed to add rhel host to rhv engine server with error - VDSM host-38
command Get Host Capabilities failed: Internal JSON-RPC error: {'reason':
"'libvirt'"}
-
Bug 1998865 <https://bugzilla.redhat.com/show_bug.cgi?id=1998865> - Host
installation fails due to missing bond file
-
Bug 1996602 <https://bugzilla.redhat.com/show_bug.cgi?id=1996602> - VM
remains in paused state when trying to write on a resized disk resides on
iscsi
oVirt Node respin is waiting for latest Advanced Virtualization build to
land on mirrors providing:
-
hivex-1.3.18-22.el8s
-
libvirt-7.6.0-2.el8s
-
libvirt-python-7.6.0-1.el8s
-
qemu-kvm-6.0.0-27.el8s
A separate announcement will be sent when the oVirt Node build will be
available.
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
3 years, 2 months
oVirt Node 4.4.8.2 Async update
by Sandro Bonazzola
oVirt Node 4.4.8.2 Async update
On September 1st 2021 the oVirt project released an async update for oVirt
Node consuming the following packages:
-
ovirt-release44 4.4.8.2
-
vdsm 4.40.80.6
oVirt Node respin also consumed most recent CentOS Stream and Advanced
Virtualization content.
It also includes fixes for:
-
CVE-2021-31535 <https://access.redhat.com/security/cve/CVE-2021-31535>
libX11: missing request length checks
-
CVE-2021-3564 <https://access.redhat.com/security/cve/CVE-2021-3564>
kernel: double free in bluetooth subsystem when the HCI device
initialization fails
-
CVE-2021-3573 <https://access.redhat.com/security/cve/CVE-2021-3573>
kernel: use-after-free in function hci_sock_bound_ioctl()
-
CVE-2021-29155 <https://access.redhat.com/security/cve/CVE-2021-29155>
kernel: protection for sequences of pointer arithmetic operations against
speculatively out-of-bounds loads can be bypassed to leak content of kernel
memory
-
CVE-2021-31829 <https://access.redhat.com/security/cve/CVE-2021-31829>
kernel: protection of stack pointer against speculative pointer arithmetic
can be bypassed to leak content of kernel memory
-
CVE-2021-33200 <https://access.redhat.com/security/cve/CVE-2021-33200>
kernel: out-of-bounds reads and writes due to enforcing incorrect limits
for pointer arithmetic operations by BPF verifier
-
CVE-2021-3679 <https://access.redhat.com/security/cve/CVE-2021-3679>
kernel: DoS in rb_per_cpu_empty()
-
CVE-2020-26144 <https://access.redhat.com/security/cve/CVE-2020-26144>
kernel: accepting unencrypted A-MSDU frames that start with RFC1042 header
-
CVE-2020-26145 <https://access.redhat.com/security/cve/CVE-2020-26145>
kernel: accepting plaintext broadcast fragments as full frames
-
CVE-2020-24587 <https://access.redhat.com/security/cve/CVE-2020-24587>
kernel: Reassembling fragments encrypted under different keys
-
CVE-2020-26141 <https://access.redhat.com/security/cve/CVE-2020-26141>
kernel: not verifying TKIP MIC of fragmented frames
-
CVE-2020-24586 <https://access.redhat.com/security/cve/CVE-2020-24586>
kernel: Fragmentation cache not cleared on reconnection
-
CVE-2020-26147 <https://access.redhat.com/security/cve/CVE-2020-26147>
kernel: reassembling mixed encrypted/plaintext fragments
-
CVE-2021-3653 <https://access.redhat.com/security/cve/CVE-2021-3653>
kernel: SVM nested virtualization issue in KVM (AVIC support)
-
CVE-2021-3656 <https://access.redhat.com/security/cve/CVE-2021-3656>
kernel: SVM nested virtualization issue in KVM (VMLOAD/VMSAVE)
Here’s the full list of changes:
--- ovirt-node-ng-image-4.4.8.1.manifest-rpm 2021-08-27 08:11:54.863736688
+0200
+++ ovirt-node-ng-image-4.4.8.2.manifest-rpm 2021-09-01 12:59:05.195037688
+0200
@@ -3,6 +3,6 @@
-NetworkManager-1.32.8-1.el8.x86_64
-NetworkManager-config-server-1.32.8-1.el8.noarch
-NetworkManager-libnm-1.32.8-1.el8.x86_64
-NetworkManager-ovs-1.32.8-1.el8.x86_64
-NetworkManager-team-1.32.8-1.el8.x86_64
-NetworkManager-tui-1.32.8-1.el8.x86_64
+NetworkManager-1.32.10-2.el8.x86_64
+NetworkManager-config-server-1.32.10-2.el8.noarch
+NetworkManager-libnm-1.32.10-2.el8.x86_64
+NetworkManager-ovs-1.32.10-2.el8.x86_64
+NetworkManager-team-1.32.10-2.el8.x86_64
+NetworkManager-tui-1.32.10-2.el8.x86_64
@@ -24 +24 @@
-ansible-2.9.24-2.el8.noarch
+ansible-2.9.25-1.el8.noarch
@@ -39,5 +39,5 @@
-bind-export-libs-9.11.26-4.el8_4.x86_64
-bind-libs-9.11.26-4.el8_4.x86_64
-bind-libs-lite-9.11.26-4.el8_4.x86_64
-bind-license-9.11.26-4.el8_4.noarch
-bind-utils-9.11.26-4.el8_4.x86_64
+bind-export-libs-9.11.26-6.el8.x86_64
+bind-libs-9.11.26-6.el8.x86_64
+bind-libs-lite-9.11.26-6.el8.x86_64
+bind-license-9.11.26-6.el8.noarch
+bind-utils-9.11.26-6.el8.x86_64
@@ -46 +46 @@
-blivet-data-3.4.0-4.el8.noarch
+blivet-data-3.4.0-5.el8.noarch
@@ -68,2 +68,2 @@
-cockpit-250-1.el8.x86_64
-cockpit-bridge-250-1.el8.x86_64
+cockpit-251-1.el8.x86_64
+cockpit-bridge-251-1.el8.x86_64
@@ -71,3 +71,3 @@
-cockpit-storaged-250-1.el8.noarch
-cockpit-system-250-1.el8.noarch
-cockpit-ws-250-1.el8.x86_64
+cockpit-storaged-251-1.el8.noarch
+cockpit-system-251-1.el8.noarch
+cockpit-ws-251-1.el8.x86_64
@@ -94 +94 @@
-curl-7.61.1-18.el8_4.1.x86_64
+curl-7.61.1-21.el8.x86_64
@@ -118,2 +118,2 @@
-dnf-4.7.0-2.el8.noarch
-dnf-data-4.7.0-2.el8.noarch
+dnf-4.7.0-3.el8.noarch
+dnf-data-4.7.0-3.el8.noarch
@@ -123,5 +123,5 @@
-dracut-049-188.git20210802.el8.x86_64
-dracut-config-generic-049-188.git20210802.el8.x86_64
-dracut-live-049-188.git20210802.el8.x86_64
-dracut-network-049-188.git20210802.el8.x86_64
-dracut-squash-049-188.git20210802.el8.x86_64
+dracut-049-190.git20210811.el8.x86_64
+dracut-config-generic-049-190.git20210811.el8.x86_64
+dracut-live-049-190.git20210811.el8.x86_64
+dracut-network-049-190.git20210811.el8.x86_64
+dracut-squash-049-190.git20210811.el8.x86_64
@@ -138 +138 @@
-ethtool-5.8-6.el8.x86_64
+ethtool-5.8-7.el8.x86_64
@@ -184 +184 @@
-fontconfig-2.13.1-3.el8.x86_64
+fontconfig-2.13.1-4.el8.x86_64
@@ -188 +188 @@
-fstrm-0.6.0-3.el8.1.x86_64
+fstrm-0.6.1-2.el8.x86_64
@@ -206,3 +206,3 @@
-glibc-2.28-162.el8.x86_64
-glibc-common-2.28-162.el8.x86_64
-glibc-langpack-en-2.28-162.el8.x86_64
+glibc-2.28-164.el8.x86_64
+glibc-common-2.28-164.el8.x86_64
+glibc-langpack-en-2.28-164.el8.x86_64
@@ -240 +240 @@
-grubby-8.40-41.el8.x86_64
+grubby-8.40-42.el8.x86_64
@@ -249 +249 @@
-hivex-1.3.18-21.module_el8.5.0+821+97472045.x86_64
+hivex-1.3.18-22.el8s.x86_64
@@ -251 +251 @@
-hwdata-0.314-8.9.el8.noarch
+hwdata-0.314-8.10.el8.noarch
@@ -265,2 +265,2 @@
-iproute-5.12.0-2.el8.x86_64
-iproute-tc-5.12.0-2.el8.x86_64
+iproute-5.12.0-3.el8.x86_64
+iproute-tc-5.12.0-3.el8.x86_64
@@ -270,3 +270,3 @@
-iptables-1.8.4-19.el8.x86_64
-iptables-ebtables-1.8.4-19.el8.x86_64
-iptables-libs-1.8.4-19.el8.x86_64
+iptables-1.8.4-20.el8.x86_64
+iptables-ebtables-1.8.4-20.el8.x86_64
+iptables-libs-1.8.4-20.el8.x86_64
@@ -301,6 +301,6 @@
-kernel-4.18.0-331.el8.x86_64
-kernel-core-4.18.0-331.el8.x86_64
-kernel-modules-4.18.0-331.el8.x86_64
-kernel-tools-4.18.0-331.el8.x86_64
-kernel-tools-libs-4.18.0-331.el8.x86_64
-kexec-tools-2.0.20-56.el8.x86_64
+kernel-4.18.0-338.el8.x86_64
+kernel-core-4.18.0-338.el8.x86_64
+kernel-modules-4.18.0-338.el8.x86_64
+kernel-tools-4.18.0-338.el8.x86_64
+kernel-tools-libs-4.18.0-338.el8.x86_64
+kexec-tools-2.0.20-57.el8.x86_64
@@ -313,2 +313,2 @@
-krb5-libs-1.18.2-13.el8.x86_64
-krb5-workstation-1.18.2-13.el8.x86_64
+krb5-libs-1.18.2-14.el8.x86_64
+krb5-workstation-1.18.2-14.el8.x86_64
@@ -318,3 +318,3 @@
-libX11-1.6.8-4.el8.x86_64
-libX11-common-1.6.8-4.el8.noarch
-libX11-xcb-1.6.8-4.el8.x86_64
+libX11-1.6.8-5.el8.x86_64
+libX11-common-1.6.8-5.el8.noarch
+libX11-xcb-1.6.8-5.el8.x86_64
@@ -353 +353 @@
-libbpf-0.3.0-1.el8.x86_64
+libbpf-0.4.0-1.el8.x86_64
@@ -363 +363 @@
-libcurl-7.61.1-18.el8_4.1.x86_64
+libcurl-7.61.1-21.el8.x86_64
@@ -407 +407 @@
-libkadm5-1.18.2-13.el8.x86_64
+libkadm5-1.18.2-14.el8.x86_64
@@ -418 +418 @@
-libmodulemd-2.12.1-1.el8.x86_64
+libmodulemd-2.13.0-1.el8.x86_64
@@ -465 +465 @@
-libsepol-2.9-2.el8.x86_64
+libsepol-2.9-3.el8.x86_64
@@ -503,24 +503,24 @@
-libvirt-7.5.0-1.el8s.x86_64
-libvirt-client-7.5.0-1.el8s.x86_64
-libvirt-daemon-7.5.0-1.el8s.x86_64
-libvirt-daemon-config-network-7.5.0-1.el8s.x86_64
-libvirt-daemon-config-nwfilter-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-interface-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-network-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-nodedev-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-nwfilter-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-qemu-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-secret-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-core-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-disk-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-gluster-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-iscsi-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-iscsi-direct-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-logical-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-mpath-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-rbd-7.5.0-1.el8s.x86_64
-libvirt-daemon-driver-storage-scsi-7.5.0-1.el8s.x86_64
-libvirt-daemon-kvm-7.5.0-1.el8s.x86_64
-libvirt-libs-7.5.0-1.el8s.x86_64
-libvirt-lock-sanlock-7.5.0-1.el8s.x86_64
+libvirt-7.6.0-2.el8s.x86_64
+libvirt-client-7.6.0-2.el8s.x86_64
+libvirt-daemon-7.6.0-2.el8s.x86_64
+libvirt-daemon-config-network-7.6.0-2.el8s.x86_64
+libvirt-daemon-config-nwfilter-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-interface-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-network-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-nodedev-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-nwfilter-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-qemu-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-secret-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-core-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-disk-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-gluster-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-iscsi-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-iscsi-direct-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-logical-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-mpath-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-rbd-7.6.0-2.el8s.x86_64
+libvirt-daemon-driver-storage-scsi-7.6.0-2.el8s.x86_64
+libvirt-daemon-kvm-7.6.0-2.el8s.x86_64
+libvirt-libs-7.6.0-2.el8s.x86_64
+libvirt-lock-sanlock-7.6.0-2.el8s.x86_64
@@ -546,2 +546,2 @@
-lldpad-1.0.1-14.git036e314.el8.x86_64
-llvm-libs-12.0.0-1.module_el8.5.0+840+21214faf.x86_64
+lldpad-1.0.1-16.git036e314.el8.x86_64
+llvm-libs-12.0.1-1.module_el8.5.0+892+54d791e1.x86_64
@@ -553 +553 @@
-lsscsi-0.32-2.el8.x86_64
+lsscsi-0.32-3.el8.x86_64
@@ -555 +555 @@
-lua-libs-5.3.4-11.el8.x86_64
+lua-libs-5.3.4-12.el8.x86_64
@@ -603 +603 @@
-nftables-0.9.3-20.el8.x86_64
+nftables-0.9.3-21.el8.x86_64
@@ -605 +605 @@
-nmap-ncat-7.70-5.el8.x86_64
+nmap-ncat-7.70-6.el8.x86_64
@@ -609 +609 @@
-nspr-4.31.0-1.el8_4.x86_64
+nspr-4.32.0-1.el8_4.x86_64
@@ -636 +636 @@
-os-prober-1.74-6.el8.x86_64
+os-prober-1.74-9.el8.x86_64
@@ -648 +648 @@
-ovirt-node-ng-image-update-placeholder-4.4.8.1-1.el8.noarch
+ovirt-node-ng-image-update-placeholder-4.4.8.2-1.el8.noarch
@@ -656,2 +656,2 @@
-ovirt-release-host-node-4.4.8.1-1.el8.noarch
-ovirt-release44-4.4.8.1-1.el8.noarch
+ovirt-release-host-node-4.4.8.2-1.el8.noarch
+ovirt-release44-4.4.8.2-1.el8.noarch
@@ -664,3 +664,3 @@
-pacemaker-cluster-libs-2.1.0-6.el8.x86_64
-pacemaker-libs-2.1.0-6.el8.x86_64
-pacemaker-schemas-2.1.0-6.el8.noarch
+pacemaker-cluster-libs-2.1.0-8.el8.x86_64
+pacemaker-libs-2.1.0-8.el8.x86_64
+pacemaker-schemas-2.1.0-8.el8.noarch
@@ -715 +715 @@
-platform-python-3.6.8-39.el8.x86_64
+platform-python-3.6.8-40.el8.x86_64
@@ -718,3 +718,3 @@
-plymouth-0.9.4-9.20200615git1e36e30.el8.x86_64
-plymouth-core-libs-0.9.4-9.20200615git1e36e30.el8.x86_64
-plymouth-scripts-0.9.4-9.20200615git1e36e30.el8.x86_64
+plymouth-0.9.4-10.20200615git1e36e30.el8.x86_64
+plymouth-core-libs-0.9.4-10.20200615git1e36e30.el8.x86_64
+plymouth-scripts-0.9.4-10.20200615git1e36e30.el8.x86_64
@@ -744,2 +744,2 @@
-python3-bind-9.11.26-4.el8_4.noarch
-python3-blivet-3.4.0-4.el8.noarch
+python3-bind-9.11.26-6.el8.noarch
+python3-blivet-3.4.0-5.el8.noarch
@@ -753 +753 @@
-python3-cloud-what-1.28.20-1.el8.x86_64
+python3-cloud-what-1.28.21-2.el8.x86_64
@@ -762 +762 @@
-python3-dnf-4.7.0-2.el8.noarch
+python3-dnf-4.7.0-3.el8.noarch
@@ -797 +797 @@
-python3-libs-3.6.8-39.el8.x86_64
+python3-libs-3.6.8-40.el8.x86_64
@@ -800 +800 @@
-python3-libvirt-7.5.0-1.el8s.x86_64
+python3-libvirt-7.6.0-1.el8s.x86_64
@@ -811 +811 @@
-python3-nftables-0.9.3-20.el8.x86_64
+python3-nftables-0.9.3-21.el8.x86_64
@@ -834 +834 @@
-python3-perf-4.18.0-331.el8.x86_64
+python3-perf-4.18.0-338.el8.x86_64
@@ -864 +864 @@
-python3-rpm-4.14.3-15.el8.x86_64
+python3-rpm-4.14.3-18.el8.x86_64
@@ -876 +876 @@
-python3-subscription-manager-rhsm-1.28.20-1.el8.x86_64
+python3-subscription-manager-rhsm-1.28.21-2.el8.x86_64
@@ -878 +878 @@
-python3-syspurpose-1.28.20-1.el8.x86_64
+python3-syspurpose-1.28.21-2.el8.x86_64
@@ -889,15 +889,15 @@
-python36-3.6.8-37.module_el8.5.0+771+e5d9a225.x86_64
-qemu-guest-agent-6.0.0-26.el8s.x86_64
-qemu-img-6.0.0-26.el8s.x86_64
-qemu-kvm-6.0.0-26.el8s.x86_64
-qemu-kvm-block-curl-6.0.0-26.el8s.x86_64
-qemu-kvm-block-gluster-6.0.0-26.el8s.x86_64
-qemu-kvm-block-iscsi-6.0.0-26.el8s.x86_64
-qemu-kvm-block-rbd-6.0.0-26.el8s.x86_64
-qemu-kvm-block-ssh-6.0.0-26.el8s.x86_64
-qemu-kvm-common-6.0.0-26.el8s.x86_64
-qemu-kvm-core-6.0.0-26.el8s.x86_64
-qemu-kvm-docs-6.0.0-26.el8s.x86_64
-qemu-kvm-hw-usbredir-6.0.0-26.el8s.x86_64
-qemu-kvm-ui-opengl-6.0.0-26.el8s.x86_64
-qemu-kvm-ui-spice-6.0.0-26.el8s.x86_64
+python36-3.6.8-38.module_el8.5.0+895+a459eca8.x86_64
+qemu-guest-agent-6.0.0-27.el8s.x86_64
+qemu-img-6.0.0-27.el8s.x86_64
+qemu-kvm-6.0.0-27.el8s.x86_64
+qemu-kvm-block-curl-6.0.0-27.el8s.x86_64
+qemu-kvm-block-gluster-6.0.0-27.el8s.x86_64
+qemu-kvm-block-iscsi-6.0.0-27.el8s.x86_64
+qemu-kvm-block-rbd-6.0.0-27.el8s.x86_64
+qemu-kvm-block-ssh-6.0.0-27.el8s.x86_64
+qemu-kvm-common-6.0.0-27.el8s.x86_64
+qemu-kvm-core-6.0.0-27.el8s.x86_64
+qemu-kvm-docs-6.0.0-27.el8s.x86_64
+qemu-kvm-hw-usbredir-6.0.0-27.el8s.x86_64
+qemu-kvm-ui-opengl-6.0.0-27.el8s.x86_64
+qemu-kvm-ui-spice-6.0.0-27.el8s.x86_64
@@ -912,4 +912,4 @@
-rpm-4.14.3-15.el8.x86_64
-rpm-build-libs-4.14.3-15.el8.x86_64
-rpm-libs-4.14.3-15.el8.x86_64
-rpm-plugin-selinux-4.14.3-15.el8.x86_64
+rpm-4.14.3-18.el8.x86_64
+rpm-build-libs-4.14.3-18.el8.x86_64
+rpm-libs-4.14.3-18.el8.x86_64
+rpm-plugin-selinux-4.14.3-18.el8.x86_64
@@ -928,3 +928,3 @@
-sbd-1.4.2-2.el8.x86_64
-scap-security-guide-0.1.57-1.el8.noarch
-scrub-2.5.2-14.el8.x86_64
+sbd-1.5.0-2.el8.x86_64
+scap-security-guide-0.1.57-4.el8.noarch
+scrub-2.5.2-16.el8.x86_64
@@ -934,2 +934,2 @@
-selinux-policy-3.14.3-76.el8.noarch
-selinux-policy-targeted-3.14.3-76.el8.noarch
+selinux-policy-3.14.3-78.el8.noarch
+selinux-policy-targeted-3.14.3-78.el8.noarch
@@ -961 +961 @@
-subscription-manager-rhsm-certificates-1.28.20-1.el8.x86_64
+subscription-manager-rhsm-certificates-1.28.21-2.el8.x86_64
@@ -973,5 +973,5 @@
-systemd-239-49.el8.x86_64
-systemd-container-239-49.el8.x86_64
-systemd-libs-239-49.el8.x86_64
-systemd-pam-239-49.el8.x86_64
-systemd-udev-239-49.el8.x86_64
+systemd-239-50.el8.x86_64
+systemd-container-239-50.el8.x86_64
+systemd-libs-239-50.el8.x86_64
+systemd-pam-239-50.el8.x86_64
+systemd-udev-239-50.el8.x86_64
@@ -993,11 +993,11 @@
-vdo-6.2.5.65-14.el8.x86_64
-vdsm-4.40.80.5-1.el8.x86_64
-vdsm-api-4.40.80.5-1.el8.noarch
-vdsm-client-4.40.80.5-1.el8.noarch
-vdsm-common-4.40.80.5-1.el8.noarch
-vdsm-gluster-4.40.80.5-1.el8.x86_64
-vdsm-http-4.40.80.5-1.el8.noarch
-vdsm-jsonrpc-4.40.80.5-1.el8.noarch
-vdsm-network-4.40.80.5-1.el8.x86_64
-vdsm-python-4.40.80.5-1.el8.noarch
-vdsm-yajsonrpc-4.40.80.5-1.el8.noarch
+vdo-6.2.5.74-14.el8.x86_64
+vdsm-4.40.80.6-1.el8.x86_64
+vdsm-api-4.40.80.6-1.el8.noarch
+vdsm-client-4.40.80.6-1.el8.noarch
+vdsm-common-4.40.80.6-1.el8.noarch
+vdsm-gluster-4.40.80.6-1.el8.x86_64
+vdsm-http-4.40.80.6-1.el8.noarch
+vdsm-jsonrpc-4.40.80.6-1.el8.noarch
+vdsm-network-4.40.80.6-1.el8.x86_64
+vdsm-python-4.40.80.6-1.el8.noarch
+vdsm-yajsonrpc-4.40.80.6-1.el8.noarch
@@ -1021 +1021 @@
-yum-4.7.0-2.el8.noarch
+yum-4.7.0-3.el8.noarch
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
3 years, 2 months