[ovirt-devel] Re: dynamic ownership changes

On 29/05/18 15:30 +0300, Elad Ben Aharon wrote: See https://gerrit.ovirt.org/#/c/90906/. The CI failure isn unrelated (storage needs real env). mpolednik > >Thanks > >On Tue, May 29, 2018 at 1:34 PM, Dan Kenigsberg <danken(a)redhat.com&gt; wrote: > >> On Tue, May 29, 2018 at 1:21 PM, Elad Ben Aharon <ebenahar(a)redhat.com&gt; >> wrote: >> > Hi Dan, >> > >> > In the last execution, the success rate was very low due to a large >> number >> > of failures on start VM caused, according to Michal, by the >> > vdsm-hook-allocate_net that was installed on the host. >> > >> > This is the latest status here, would you like me to re-execute? >> >> yes, of course. but you should rebase Polednik's code on top of >> *current* ovirt-4.2.3 branch. >> >> > If so, with >> > or W/O vdsm-hook-allocate_net installed? >> >> There was NO reason to have that installed. Please keep it (and any >> other needless code) out of the test environment. >> >> > >> > On Tue, May 29, 2018 at 1:14 PM, Dan Kenigsberg <danken(a)redhat.com&gt; >> wrote: >> >> >> >> On Mon, May 7, 2018 at 3:53 PM, Michal Skrivanek >> >> <michal.skrivanek(a)redhat.com&gt; wrote: >> >> > Hi Elad, >> >> > why did you install vdsm-hook-allocate_net? >> >> > >> >> > adding Dan as I think the hook is not supposed to fail this badly in >> any >> >> > case >> >> >> >> yep, this looks bad and deserves a little bug report. Installing this >> >> little hook should not block vm startup. >> >> >> >> But more importantly - what is the conclusion of this thread? Do we >> >> have a green light from QE to take this in? >> >> >> >> >> >> > >> >> > Thanks, >> >> > michal >> >> > >> >> > On 5 May 2018, at 19:22, Elad Ben Aharon <ebenahar(a)redhat.com&gt; wrote: >> >> > >> >> > Start VM fails on: >> >> > >> >> > 2018-05-05 17:53:27,399+0300 INFO (vm/e6ce66ce) [virt.vm] >> >> > (vmId='e6ce66ce-852f-48c5-9997-5d2959432a27') drive 'vda' path: >> >> > >> >> > 'dev=/rhev/data-center/mnt/blockSD/db5a6696-d907-4938- >> 9a78-bdd13a843c62/images/6cdabfe5- >> >> > d1ca-40af-ae63-9834f235d1c8/7ef97445-30e6-4435-8425-f35a01928211' -> >> >> > >> >> > u'*dev=/rhev/data-center/mnt/blockSD/db5a6696-d907-4938- >> 9a78-bdd13a843c62/images/6cdabfe5-d1ca-40af-ae63- >> 9834f235d1c8/7ef97445-30e6-4435-8425- >> >> > f35a01928211' (storagexml:334) >> >> > 2018-05-05 17:53:27,888+0300 INFO (jsonrpc/1) [vdsm.api] START >> >> > getSpmStatus(spUUID='940fe6f3-b0c6-4d0c-a921-198e7819c1cc', >> >> > options=None) >> >> > from=::ffff:10.35.161.127,53512, >> >> > task_id=c70ace39-dbfe-4f5c-ae49-a1e3a82c >> >> > 2758 (api:46) >> >> > 2018-05-05 17:53:27,909+0300 INFO (vm/e6ce66ce) [root] >> >> > /usr/libexec/vdsm/hooks/before_device_create/10_allocate_net: rc=2 >> >> > err=vm >> >> > net allocation hook: [unexpected error]: Traceback (most recent call >> >> > last): >> >> > File "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", >> >> > line >> >> > 105, in <module> >> >> > main() >> >> > File "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", >> >> > line >> >> > 93, in main >> >> > allocate_random_network(device_xml) >> >> > File "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", >> >> > line >> >> > 62, in allocate_random_network >> >> > net = _get_random_network() >> >> > File "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", >> >> > line >> >> > 50, in _get_random_network >> >> > available_nets = _parse_nets() >> >> > File "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", >> >> > line >> >> > 46, in _parse_nets >> >> > return [net for net in os.environ[AVAIL_NETS_KEY].split()] >> >> > File "/usr/lib64/python2.7/UserDict.py", line 23, in __getitem__ >> >> > raise KeyError(key) >> >> > KeyError: 'equivnets' >> >> > >> >> > >> >> > (hooks:110) >> >> > 2018-05-05 17:53:27,915+0300 ERROR (vm/e6ce66ce) [virt.vm] >> >> > (vmId='e6ce66ce-852f-48c5-9997-5d2959432a27') The vm start process >> >> > failed >> >> > (vm:943) >> >> > Traceback (most recent call last): >> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, >> in >> >> > _startUnderlyingVm >> >> > self._run() >> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2861, >> in >> >> > _run >> >> > domxml = hooks.before_vm_start(self._buildDomainXML(), >> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2254, >> in >> >> > _buildDomainXML >> >> > dom, self.id, self._custom['custom']) >> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/domxml_ >> preprocess.py", >> >> > line 240, in replace_device_xml_with_hooks_xml >> >> > dev_custom) >> >> > File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py", line >> 134, >> >> > in >> >> > before_device_create >> >> > params=customProperties) >> >> > File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py", line >> 120, >> >> > in >> >> > _runHooksDir >> >> > raise exception.HookError(err) >> >> > HookError: Hook Error: ('vm net allocation hook: [unexpected error]: >> >> > Traceback (most recent call last):\n File >> >> > "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", line >> >> > 105, in >> >> > <module>\n main()\n >> >> > File "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", >> >> > line >> >> > 93, in main\n allocate_random_network(device_xml)\n File >> >> > "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", line >> 62, >> >> > i >> >> > n allocate_random_network\n net = _get_random_network()\n File >> >> > "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_net", line >> 50, >> >> > in >> >> > _get_random_network\n available_nets = _parse_nets()\n File "/us >> >> > r/libexec/vdsm/hooks/before_device_create/10_allocate_net", line 46, >> in >> >> > _parse_nets\n return [net for net in >> >> > os.environ[AVAIL_NETS_KEY].split()]\n File >> >> > "/usr/lib64/python2.7/UserDict.py", line 23, in __getit >> >> > em__\n raise KeyError(key)\nKeyError: \'equivnets\'\n\n\n',) >> >> > >> >> > >> >> > >> >> > Hence, the success rate was 28% against 100% running with d/s (d/s). >> If >> >> > needed, I'll compare against the latest master, but I think you get >> the >> >> > picture with d/s. >> >> > >> >> > vdsm-4.20.27-3.gitfee7810.el7.centos.x86_64 >> >> > libvirt-3.9.0-14.el7_5.3.x86_64 >> >> > qemu-kvm-rhev-2.10.0-21.el7_5.2.x86_64 >> >> > kernel 3.10.0-862.el7.x86_64 >> >> > rhel7.5 >> >> > >> >> > >> >> > Logs attached >> >> > >> >> > On Sat, May 5, 2018 at 1:26 PM, Elad Ben Aharon <ebenahar(a)redhat.com&gt; >> >> > wrote: >> >> >> >> >> >> nvm, found gluster 3.12 repo, managed to install vdsm >> >> >> >> >> >> On Sat, May 5, 2018 at 1:12 PM, Elad Ben Aharon <ebenahar(a)redhat.com >> > >> >> >> wrote: >> >> >>> >> >> >>> No, vdsm requires it: >> >> >>> >> >> >>> Error: Package: vdsm-4.20.27-3.gitfee7810.el7.centos.x86_64 >> >> >>> (/vdsm-4.20.27-3.gitfee7810.el7.centos.x86_64) >> >> >>> Requires: glusterfs-fuse >= 3.12 >> >> >>> Installed: glusterfs-fuse-3.8.4-54.8.el7.x86_64 >> (@rhv-4.2.3) >> >> >>> >> >> >>> Therefore, vdsm package installation is skipped upon force install. >> >> >>> >> >> >>> On Sat, May 5, 2018 at 11:42 AM, Michal Skrivanek >> >> >>> <michal.skrivanek(a)redhat.com&gt; wrote: >> >> >>>> >> >> >>>> >> >> >>>> >> >> >>>> On 5 May 2018, at 00:38, Elad Ben Aharon <ebenahar(a)redhat.com&gt; >> wrote: >> >> >>>> >> >> >>>> Hi guys, >> >> >>>> >> >> >>>> The vdsm build from the patch requires glusterfs-fuse > 3.12. This >> is >> >> >>>> while the latest 4.2.3-5 d/s build requires 3.8.4 >> (3.4.0.59rhs-1.el7) >> >> >>>> >> >> >>>> >> >> >>>> because it is still oVirt, not a downstream build. We can’t really >> do >> >> >>>> downstream builds with unmerged changes:/ >> >> >>>> >> >> >>>> Trying to get this gluster-fuse build, so far no luck. >> >> >>>> Is this requirement intentional? >> >> >>>> >> >> >>>> >> >> >>>> it should work regardless, I guess you can force install it without >> >> >>>> the >> >> >>>> dependency >> >> >>>> >> >> >>>> >> >> >>>> On Fri, May 4, 2018 at 2:38 PM, Michal Skrivanek >> >> >>>> <michal.skrivanek(a)redhat.com&gt; wrote: >> >> >>>>> >> >> >>>>> Hi Elad, >> >> >>>>> to make it easier to compare, Martin backported the change to 4.2 >> so >> >> >>>>> it >> >> >>>>> is actually comparable with a run without that patch. Would you >> >> >>>>> please try >> >> >>>>> that out? >> >> >>>>> It would be best to have 4.2 upstream and this[1] run to really >> >> >>>>> minimize the noise. >> >> >>>>> >> >> >>>>> Thanks, >> >> >>>>> michal >> >> >>>>> >> >> >>>>> [1] >> >> >>>>> >> >> >>>>> http://jenkins.ovirt.org/job/vdsm_4.2_build-artifacts-on- >> demand-el7-x86_64/28/ >> >> >>>>> >> >> >>>>> On 27 Apr 2018, at 09:23, Martin Polednik <mpolednik(a)redhat.com&gt; >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> On 24/04/18 00:37 +0300, Elad Ben Aharon wrote: >> >> >>>>> >> >> >>>>> I will update with the results of the next tier1 execution on >> latest >> >> >>>>> 4.2.3 >> >> >>>>> >> >> >>>>> >> >> >>>>> That isn't master but old branch though. Could you run it against >> >> >>>>> *current* VDSM master? >> >> >>>>> >> >> >>>>> On Mon, Apr 23, 2018 at 3:56 PM, Martin Polednik >> >> >>>>> <mpolednik(a)redhat.com&gt; >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> On 23/04/18 01:23 +0300, Elad Ben Aharon wrote: >> >> >>>>> >> >> >>>>> Hi, I've triggered another execution [1] due to some issues I saw >> in >> >> >>>>> the >> >> >>>>> first which are not related to the patch. >> >> >>>>> >> >> >>>>> The success rate is 78% which is low comparing to tier1 executions >> >> >>>>> with >> >> >>>>> code from downstream builds (95-100% success rates) [2]. >> >> >>>>> >> >> >>>>> >> >> >>>>> Could you run the current master (without the dynamic_ownership >> >> >>>>> patch) >> >> >>>>> so that we have viable comparision? >> >> >>>>> >> >> >>>>> From what I could see so far, there is an issue with move and copy >> >> >>>>> >> >> >>>>> operations to and from Gluster domains. For example [3]. >> >> >>>>> >> >> >>>>> The logs are attached. >> >> >>>>> >> >> >>>>> >> >> >>>>> [1] >> >> >>>>> *https://rhv-jenkins.rhev-ci-vms.eng.rdu2.redhat.com/job/rhv >> >> >>>>> -4.2-ge-runner-tier1-after-upgrade/7/testReport/ >> >> >>>>> <https://rhv-jenkins.rhev-ci-vms.eng.rdu2.redhat.com/job/rhv >> >> >>>>> -4.2-ge-runner-tier1-after-upgrade/7/testReport/>* >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> [2] >> >> >>>>> https://rhv-jenkins.rhev-ci-vms.eng.rdu2.redhat.com/job/ >> >> >>>>> >> >> >>>>> rhv-4.2-ge-runner-tier1-after-upgrade/7/ >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> [3] >> >> >>>>> 2018-04-22 13:06:28,316+0300 INFO (jsonrpc/7) [vdsm.api] FINISH >> >> >>>>> deleteImage error=Image does not exist in domain: >> >> >>>>> 'image=cabb8846-7a4b-4244-9835-5f603e682f33, >> >> >>>>> domain=e5fd29c8-52ba-467e-be09-ca40ff054dd4' >> >> >>>>> from=: >> >> >>>>> :ffff:10.35.161.182,40936, >> >> >>>>> flow_id=disks_syncAction_ba6b2630-5976-4935, >> >> >>>>> task_id=3d5f2a8a-881c-409e-93e9-aaa643c10e42 (api:51) >> >> >>>>> 2018-04-22 13:06:28,317+0300 ERROR (jsonrpc/7) >> >> >>>>> [storage.TaskManager.Task] >> >> >>>>> (Task='3d5f2a8a-881c-409e-93e9-aaa643c10e42') Unexpected error >> >> >>>>> (task:875) >> >> >>>>> Traceback (most recent call last): >> >> >>>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", >> line >> >> >>>>> 882, >> >> >>>>> in >> >> >>>>> _run >> >> >>>>> return fn(*args, **kargs) >> >> >>>>> File "<string>", line 2, in deleteImage >> >> >>>>> File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line >> 49, >> >> >>>>> in >> >> >>>>> method >> >> >>>>> ret = func(*args, **kwargs) >> >> >>>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line >> >> >>>>> 1503, >> >> >>>>> in >> >> >>>>> deleteImage >> >> >>>>> raise se.ImageDoesNotExistInSD(imgUUID, sdUUID) >> >> >>>>> ImageDoesNotExistInSD: Image does not exist in domain: >> >> >>>>> 'image=cabb8846-7a4b-4244-9835-5f603e682f33, >> >> >>>>> domain=e5fd29c8-52ba-467e-be09-ca40ff054dd4' >> >> >>>>> >> >> >>>>> 2018-04-22 13:06:28,317+0300 INFO (jsonrpc/7) >> >> >>>>> [storage.TaskManager.Task] >> >> >>>>> (Task='3d5f2a8a-881c-409e-93e9-aaa643c10e42') aborting: Task is >> >> >>>>> aborted: >> >> >>>>> "Image does not exist in domain: 'image=cabb8846-7a4b-4244-9835- >> >> >>>>> 5f603e682f33, domain=e5fd29c8-52ba-467e-be09-ca40ff054dd4'" - >> code >> >> >>>>> 268 >> >> >>>>> (task:1181) >> >> >>>>> 2018-04-22 13:06:28,318+0300 ERROR (jsonrpc/7) >> [storage.Dispatcher] >> >> >>>>> FINISH >> >> >>>>> deleteImage error=Image does not exist in domain: >> >> >>>>> 'image=cabb8846-7a4b-4244-9835-5f603e682f33, >> >> >>>>> domain=e5fd29c8-52ba-467e-be09 >> >> >>>>> -ca40ff054d >> >> >>>>> d4' (dispatcher:82) >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> On Thu, Apr 19, 2018 at 5:34 PM, Elad Ben Aharon >> >> >>>>> <ebenahar(a)redhat.com&gt; >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> Triggered a sanity tier1 execution [1] using [2], which covers all >> >> >>>>> the >> >> >>>>> >> >> >>>>> requested areas, on iSCSI, NFS and Gluster. >> >> >>>>> I'll update with the results. >> >> >>>>> >> >> >>>>> [1] >> >> >>>>> https://rhv-jenkins.rhev-ci-vms.eng.rdu2.redhat.com/view/4.2 >> >> >>>>> _dev/job/rhv-4.2-ge-flow-storage/1161/ >> >> >>>>> >> >> >>>>> [2] >> >> >>>>> https://gerrit.ovirt.org/#/c/89830/ >> >> >>>>> vdsm-4.30.0-291.git77aef9a.el7.x86_64 >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> On Thu, Apr 19, 2018 at 3:07 PM, Martin Polednik >> >> >>>>> <mpolednik(a)redhat.com&gt; >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> On 19/04/18 14:54 +0300, Elad Ben Aharon wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> Hi Martin, >> >> >>>>> >> >> >>>>> >> >> >>>>> I see [1] requires a rebase, can you please take care? >> >> >>>>> >> >> >>>>> >> >> >>>>> Should be rebased. >> >> >>>>> >> >> >>>>> At the moment, our automation is stable only on iSCSI, NFS, >> Gluster >> >> >>>>> and >> >> >>>>> >> >> >>>>> FC. >> >> >>>>> Ceph is not supported and Cinder will be stabilized soon, AFAIR, >> >> >>>>> it's >> >> >>>>> not >> >> >>>>> stable enough at the moment. >> >> >>>>> >> >> >>>>> >> >> >>>>> That is still pretty good. >> >> >>>>> >> >> >>>>> >> >> >>>>> [1] https://gerrit.ovirt.org/#/c/89830/ >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> Thanks >> >> >>>>> >> >> >>>>> On Wed, Apr 18, 2018 at 2:17 PM, Martin Polednik >> >> >>>>> <mpolednik(a)redhat.com >> >> >>>>> > >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> On 18/04/18 11:37 +0300, Elad Ben Aharon wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> Hi, sorry if I misunderstood, I waited for more input regarding >> what >> >> >>>>> >> >> >>>>> areas >> >> >>>>> have to be tested here. >> >> >>>>> >> >> >>>>> >> >> >>>>> I'd say that you have quite a bit of freedom in this regard. >> >> >>>>> >> >> >>>>> GlusterFS >> >> >>>>> should be covered by Dennis, so iSCSI/NFS/ceph/cinder with some >> >> >>>>> suite >> >> >>>>> that covers basic operations (start & stop VM, migrate it), >> >> >>>>> snapshots >> >> >>>>> and merging them, and whatever else would be important for storage >> >> >>>>> sanity. >> >> >>>>> >> >> >>>>> mpolednik >> >> >>>>> >> >> >>>>> >> >> >>>>> On Wed, Apr 18, 2018 at 11:16 AM, Martin Polednik < >> >> >>>>> mpolednik(a)redhat.com >> >> >>>>> > >> >> >>>>> >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> On 11/04/18 16:52 +0300, Elad Ben Aharon wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> We can test this on iSCSI, NFS and GlusterFS. As for ceph and >> >> >>>>> cinder, >> >> >>>>> >> >> >>>>> will >> >> >>>>> >> >> >>>>> have to check, since usually, we don't execute our automation on >> >> >>>>> them. >> >> >>>>> >> >> >>>>> >> >> >>>>> Any update on this? I believe the gluster tests were successful, >> >> >>>>> OST >> >> >>>>> >> >> >>>>> passes fine and unit tests pass fine, that makes the storage >> >> >>>>> backends >> >> >>>>> test the last required piece. >> >> >>>>> >> >> >>>>> >> >> >>>>> On Wed, Apr 11, 2018 at 4:38 PM, Raz Tamir <ratamir(a)redhat.com&gt; >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> +Elad >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> On Wed, Apr 11, 2018 at 4:28 PM, Dan Kenigsberg < >> danken(a)redhat.com >> >> >>>>> >> >> >>>>> > >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> On Wed, Apr 11, 2018 at 12:34 PM, Nir Soffer <nsoffer(a)redhat.com&gt; >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> On Wed, Apr 11, 2018 at 12:31 PM Eyal Edri <eedri(a)redhat.com&gt; >> >> >>>>> >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> Please make sure to run as much OST suites on this patch as >> >> >>>>> >> >> >>>>> possible >> >> >>>>> >> >> >>>>> before merging ( using 'ci please build' ) >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> But note that OST is not a way to verify the patch. >> >> >>>>> >> >> >>>>> >> >> >>>>> Such changes require testing with all storage types we support. >> >> >>>>> >> >> >>>>> Nir >> >> >>>>> >> >> >>>>> On Tue, Apr 10, 2018 at 4:09 PM, Martin Polednik < >> >> >>>>> mpolednik(a)redhat.com >> >> >>>>> > >> >> >>>>> >> >> >>>>> wrote: >> >> >>>>> >> >> >>>>> >> >> >>>>> Hey, >> >> >>>>> >> >> >>>>> >> >> >>>>> I've created a patch[0] that is finally able to activate >> >> >>>>> >> >> >>>>> libvirt's >> >> >>>>> dynamic_ownership for VDSM while not negatively affecting >> >> >>>>> functionality of our storage code. >> >> >>>>> >> >> >>>>> That of course comes with quite a bit of code removal, mostly >> >> >>>>> in >> >> >>>>> the >> >> >>>>> area of host devices, hwrng and anything that touches devices; >> >> >>>>> bunch >> >> >>>>> of test changes and one XML generation caveat (storage is >> >> >>>>> handled >> >> >>>>> by >> >> >>>>> VDSM, therefore disk relabelling needs to be disabled on the >> >> >>>>> VDSM >> >> >>>>> level). >> >> >>>>> >> >> >>>>> Because of the scope of the patch, I welcome >> >> >>>>> storage/virt/network >> >> >>>>> people to review the code and consider the implication this >> >> >>>>> change >> >> >>>>> has >> >> >>>>> on current/future features. >> >> >>>>> >> >> >>>>> [0] https://gerrit.ovirt.org/#/c/89830/ >> >> >>>>> >> >> >>>>> >> >> >>>>> In particular: dynamic_ownership was set to 0 prehistorically >> >> >>>>> (as >> >> >>>>> >> >> >>>>> >> >> >>>>> part >> >> >>>>> >> >> >>>>> >> >> >>>>> of https://bugzilla.redhat.com/show_bug.cgi?id=554961 ) because >> >> >>>>> >> >> >>>>> libvirt, >> >> >>>>> running as root, was not able to play properly with root-squash >> >> >>>>> nfs >> >> >>>>> mounts. >> >> >>>>> >> >> >>>>> Have you attempted this use case? >> >> >>>>> >> >> >>>>> I join to Nir's request to run this with storage QE. >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> -- >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> Raz Tamir >> >> >>>>> Manager, RHV QE >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> _______________________________________________ >> >> >>>>> Devel mailing list >> >> >>>>> Devel(a)ovirt.org >> >> >>>>> http://lists.ovirt.org/mailman/listinfo/devel >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>> >> >> >>>> >> >> >>> >> >> >> >> >> > >> >> > <logs.tar.gz> >> >> > >> >> > >> > >> > >>