Re: [Engine-devel] [vdsm] Proposal VDSM <=> Engine Data Statistics Retrieval Optimization

This is a multi-part message in MIME format. --------------090700020909000108020704 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Hi, I finally have an update for the proposal ready, after some thinking and throwing some ideas around with colleagues we came to the conclusion that the best approach might be as followed (without having dynamic return values) I have set up some test engine with 'FakeVDSM' and I am tracking the data sent. The system has 250 hosts and about 10000 VMs running. I have captured 1.3 GiB TCP data within about 20 minutes only from the communication between the engine and the fake VDSM host. In a frame of 23 minutes I have captured 13.560 getAllVMStats and getAllVdsStats calls, and 67827 calls to list. getAllVmStats replies have produced in that time about 510MiB of data transmitted to the engine. This proposal below would reduce the overall amount of data significantly and we're preparing to work on a prototype for the engine backend as well so we can backup this statement with hard numbers. Here's the proposal. VDSM <=> Engine data retrieval optimization Motivation: Currently the oVirt Engine is polling a lot of data from VDSM every 15 seconds. This should be optimized and the amount of data requested should be more specific. For each VM the data currently contains much more information than actually needed which blows up the size of the XML content quite big. We could optimize this by splitting the reply on the getVmStats based on the needs of the engine into different requests. For this reason Omer Frenkel and me have split up the data into parts based on their usage. Changes New Verbs getAllRuntimeStats Get runtime information of all VMs Returns for each VM a map with UUID and a value of: * *@cpuSys* Ratio of CPU time spent by qemu on other than guest time * *@cpuUser* Ratio of CPU time spent by the guest VM * *@memUsage* The percent of memory in use by the guest * *@elapsedTime* The number of seconds that the VM has been running * *@status* The current status of the given VM * *@statsAge* The age of these statistics in seconds * *@hashes* Hashes of several statistics and information around VMs Hashes consists of: * *@info* Hash for VmConfInfo data * *@config* Hash of the VM configuration XML * *@status* Hash of the VmStatusInfo data * *@guestDetails* Hash of the VmGuestDetails data getStatus Get status information about a list of VMs Parameters: * *@vmIDs* a list of UUIDs for VMs to query Returns for each VM in vmIDs a map with UUID and a value of: * *timeOffset* The time difference from host to the VM in seconds * *monitorResponse* Indicates if the qemu monitor is responsive * *clientIp* The IP address of the client connected to the display * *username* the username associated with the current session * *session* The current state of user interaction with the VM * *guestIPs* A space separated string of assigned IPv4 addresses * *pauseCode* Indicates the reason a VM has been paused getConfInfo Get configuration information about a list of VMs Parameters: * *@vmIDs* a list of UUIDs for VMs to query Returns for each VM in vmIDs a map with UUID and a value of: * *acpiEnable* Indicates if ACPI is enabled inside the VM * *displayPort* The port in use for unencrypted display data * *displaySecurePort* The port in use for encrypted display data * *displayType* The type of display in use * *displayIp* The IP address to use for accessing the VM display * *pid* The process ID of the underlying qemu process * *vmType* The type of VM * *kvmEnable* Indicates if KVM hardware acceleration is enabled * *cdrom* /*optional*/ The path to an ISO image used in the VM's CD-ROM device * *boot* /*optional*/ An alias for the type of device used to boot the VM getAllDeviceStats VM device statistics containing information for getting statistics and SLA information Returns for each VM a map with UUID and a value of: * *memoryStats* Memory statistics as reported by the guest agent * *balloonInfo* Guest memory balloon information * *disksUsage* Info about mounted filesystems as reported by the agent * *network* Network bandwidth/utilization statistics * *disks* Disk bandwidth/utilization statistics getGuestDetails Get details from the guest OS from a list of VMs Parameters: * *@vmIDs* a list of UUIDs for VMs to query Returns for each VM in vmIDs a map with UUID and a value of: * *appsList* A list of installed applications with their versions * *netIfaces* Network device address info as reported by the agent Usage Currently the engine is requesting currently every 3 seconds the vm list from each vdsm host and every 15 seconds all the data mentioned above for all VMs. The change would be as follows: The engine requests every 3 seconds getAllRuntimeStats from vdsm which will give the engine the most used data. If the engine has a mismatch of the hashes returned by getAllRuntimeStats it should request the data changed. if hashes.info changed => request getConfInfo with all vmIDs on that host where the hash changed if hashes.status changed => request getStatus with all vmIDs on that host where the hash changed if hashes.guestDetails changed => request getGuestDetails with all vmIDs on that host where the hash changed Request getAllDeviceStats periodically e.g. every 5 minutes, which should be sufficient for the DWH, in case it is not it could be even configurable. On 03/17/2013 04:30 PM, Dan Kenigsberg wrote: -- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R & D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com --------------090700020909000108020704 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit <html> <head> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> <div class="moz-cite-prefix">Hi,<br> <br> I finally have an update for the proposal ready, after some thinking and throwing some ideas around with colleagues we came to the conclusion that the best approach might be as followed (without having dynamic return values)<br> <br> I have set up some test engine with 'FakeVDSM' and I am tracking the data sent. The system has 250 hosts and about 10000 VMs running. I have captured 1.3 GiB TCP data within about 20 minutes only from the communication between the engine and the fake VDSM host. In a frame of 23 minutes I have captured <meta http-equiv="CONTENT-TYPE" content="text/html; charset=UTF-8"> <title></title> <meta name="GENERATOR" content="LibreOffice 3.6 (Linux)"> <style> <!-- BODY,DIV,TABLE,THEAD,TBODY,TFOOT,TR,TH,TD,P { font-family:"Liberation Sans"; font-size:x-small } --> </style>13.560 getAllVMStats and getAllVdsStats calls, and 67827 calls to list.<br> <br> getAllVmStats replies have produced in that time about 510MiB of data transmitted to the engine. This proposal below would reduce the overall amount of data significantly and we're preparing to work on a prototype for the engine backend as well so we can backup this statement with hard numbers.<br> <br> <br> Here's the proposal.<br> <br> <h2><span class="mw-headline" id="VDSM_.3C.3D.3E_Engine_data_retrieval_optimization">VDSM &lt;=&gt; Engine data retrieval optimization </span></h2> <h3> <span class="mw-headline" id="Motivation:"> Motivation: </span></h3> <p>Currently the oVirt Engine is polling a lot of data from VDSM every 15 seconds. This should be optimized and the amount of data requested should be more specific. </p> <p>For each VM the data currently contains much more information than actually needed which blows up the size of the XML content quite big. We could optimize this by splitting the reply on the getVmStats based on the needs of the engine into different requests. For this reason Omer Frenkel and me have split up the data into parts based on their usage. </p> <h3> <span class="mw-headline" id="Changes"> Changes </span></h3> <h4> <span class="mw-headline" id="New_Verbs"> New Verbs </span></h4> <h5> <span class="mw-headline" id="getAllRuntimeStats"> getAllRuntimeStats </span></h5> <p>Get runtime information of all VMs<br> Returns for each VM a map with UUID and a value of: </p> <ul> <li> <b>@cpuSys</b> Ratio of CPU time spent by qemu on other than guest time </li> <li> <b>@cpuUser</b> Ratio of CPU time spent by the guest VM </li> <li> <b>@memUsage</b> The percent of memory in use by the guest </li> <li> <b>@elapsedTime</b> The number of seconds that the VM has been running </li> <li> <b>@status</b> The current status of the given VM </li> <li> <b>@statsAge</b> The age of these statistics in seconds </li> <li> <b>@hashes</b> Hashes of several statistics and information around VMs </li> </ul> <p>Hashes consists of: </p> <ul> <li> <b>@info</b> Hash for VmConfInfo data </li> <li> <b>@config</b> Hash of the VM configuration XML </li> <li> <b>@status</b> Hash of the VmStatusInfo data </li> <li> <b>@guestDetails</b> Hash of the VmGuestDetails data </li> </ul> <h5> <span class="mw-headline" id="getStatus"> getStatus </span></h5> <p>Get status information about a list of VMs<br> Parameters: </p> <ul> <li> <b>@vmIDs</b> a list of UUIDs for VMs to query </li> </ul> <p>Returns for each VM in vmIDs a map with UUID and a value of: </p> <ul> <li> <b>timeOffset</b> The time difference from host to the VM in seconds </li> <li> <b>monitorResponse</b> Indicates if the qemu monitor is responsive </li> <li> <b>clientIp</b> The IP address of the client connected to the display </li> <li> <b>username</b> the username associated with the current session </li> <li> <b>session</b> The current state of user interaction with the VM </li> <li> <b>guestIPs</b> A space separated string of assigned IPv4 addresses </li> <li> <b>pauseCode</b> Indicates the reason a VM has been paused </li> </ul> <h5> <span class="mw-headline" id="getConfInfo"> getConfInfo </span></h5> <p>Get configuration information about a list of VMs<br> Parameters: </p> <ul> <li> <b>@vmIDs</b> a list of UUIDs for VMs to query </li> </ul> <p>Returns for each VM in vmIDs a map with UUID and a value of: </p> <ul> <li> <b>acpiEnable</b> Indicates if ACPI is enabled inside the VM </li> <li> <b>displayPort</b> The port in use for unencrypted display data </li> <li> <b>displaySecurePort</b> The port in use for encrypted display data </li> <li> <b>displayType</b> The type of display in use </li> <li> <b>displayIp</b> The IP address to use for accessing the VM display </li> <li> <b>pid</b> The process ID of the underlying qemu process </li> <li> <b>vmType</b> The type of VM </li> <li> <b>kvmEnable</b> Indicates if KVM hardware acceleration is enabled </li> <li> <b>cdrom</b> <i><b>optional</b></i> The path to an ISO image used in the VM's CD-ROM device </li> <li> <b>boot</b> <i><b>optional</b></i> An alias for the type of device used to boot the VM </li> </ul> <h5> <span class="mw-headline" id="getAllDeviceStats"> getAllDeviceStats </span></h5> <p>VM device statistics containing information for getting statistics and SLA information<br> Returns for each VM a map with UUID and a value of: </p> <ul> <li> <b>memoryStats</b> Memory statistics as reported by the guest agent </li> <li> <b>balloonInfo</b> Guest memory balloon information </li> <li> <b>disksUsage</b> Info about mounted filesystems as reported by the agent </li> <li> <b>network</b> Network bandwidth/utilization statistics </li> <li> <b>disks</b> Disk bandwidth/utilization statistics </li> </ul> <h5> <span class="mw-headline" id="getGuestDetails"> getGuestDetails </span></h5> <p>Get details from the guest OS from a list of VMs<br> Parameters: </p> <ul> <li> <b>@vmIDs</b> a list of UUIDs for VMs to query </li> </ul> <p>Returns for each VM in vmIDs a map with UUID and a value of: </p> <ul> <li> <b>appsList</b> A list of installed applications with their versions </li> <li> <b>netIfaces</b> Network device address info as reported by the agent </li> </ul> <h4> <span class="mw-headline" id="Usage"> Usage </span></h4> <p>Currently the engine is requesting currently every 3 seconds the vm list from each vdsm host and every 15 seconds all the data mentioned above for all VMs. </p> <p>The change would be as follows: </p> <p>The engine requests every 3 seconds getAllRuntimeStats from vdsm which will give the engine the most used data. If the engine has a mismatch of the hashes returned by getAllRuntimeStats it should request the data changed. </p> <p>if hashes.info changed =&gt; request getConfInfo with all vmIDs on that host where the hash changed if hashes.status changed =&gt; request getStatus with all vmIDs on that host where the hash changed if hashes.guestDetails changed =&gt; request getGuestDetails with all vmIDs on that host where the hash changed </p> <p>Request getAllDeviceStats periodically e.g. every 5 minutes, which should be sufficient for the DWH, in case it is not it could be even configurable. </p> <br> <br> On 03/17/2013 04:30 PM, Dan Kenigsberg wrote:<br> </div> <blockquote cite="mid:20130317153038.GB4891@redhat.com" type="cite"> <pre wrap="">On Sun, Mar 17, 2013 at 10:28:15AM -0400, Ayal Baron wrote: </pre> <blockquote type="cite"> <pre wrap=""> ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">On 17/03/13 15:13, Ayal Baron wrote: </pre> <blockquote type="cite"> <pre wrap=""> ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">On 03/13/2013 11:55 PM, Ayal Baron wrote: ... </pre> <blockquote type="cite"> <blockquote type="cite"> <blockquote type="cite"> <blockquote type="cite"> <pre wrap="">The only reason we have this problem is because there is this thing against making multiple calls. Just split it up. getVmRuntimeStats() - transient things like mem and cpu% getVmInformation() - (semi)static things like disk\networking layout etc. Each updated at different intervals. </pre> </blockquote> <pre wrap="">+1 on splitting the data up into 2 separate API calls. You could potentially add a checksum (md5, or any other way) of the "static" data to getVmRuntimeStats and not bother even with polling the VmInformation if this hasn't changed. Then you could poll as often as you'd like the stats and immediately see if you also need to retrieve VmInfo or not (you rarely would). </pre> </blockquote> <pre wrap="">+1 To Ayal's suggestion except that instead of the engine hashing the data VDSM sends the key which is opaque to the engine. This can be a local timestap or a generation number. </pre> </blockquote> <pre wrap="">Of course vdsm does the hash, otherwise you'd need to pass all the data to engine which would beat the purpose. </pre> </blockquote> <pre wrap="">I thought you meant engine will be sending the hash of previous requests per VM to vdsm, then vdsm will reply back with vm's removed, vm's added, and the details for vm's that changed (i.e., engine would be doing something like if-modified-since-checksum per vm). benefit is reducing a round trip. but first would need to split to calls of stats (always changing) and slowly/never changing data. </pre> </blockquote> <pre wrap="">If vdms accepts the hash then in your method engine would have to periodically call getVmInfo(hash). What I was suggesting is that getVmStats would return vmInfo hash so that we could avoid calling getVmInfo altogether. The stats *always* change so there is no need for checking if that info has changed. What we could do is avoid the split into 2 verbs by calling getVmStats(hash) and then have getVmStats return everything if the hash has changed or only the stats if it hasn't. This would be the least number of roundtrips and avoid the split. If you don't pass a hash it would return everything so this way it's also fully backward compatible. </pre> </blockquote> <pre wrap=""> For the 'static' data, why is there a need for a hash? If VDSM sends in each update a timestamp, can't RHEVM just use if-modified-since with the last timestamp it got from VDSM? Is it cheaper for VDSM to calculate the hash, than update the timestamp per change in any of the fields? It doesn't really need to update the timestamp per change, only for the first change since last update sent actually (so 'dirty' flag in a way, to signify data that RHEVM hasn't seen yet). Y. </pre> </blockquote> <pre wrap=""> As Saggi mentioned: "VDSM sends the key which is opaque to the engine. This can be a local timestap or a generation number." The content doesn't matter, what matters is that it has changed. timestamp assumes that vdsm will track changes and send only delta. Although possible this would be an overkill (for every value in the dict you'd have to hold a timestamp of last change and send only those which have changed since the timestamp which was passed by the user). </pre> </blockquote> <pre wrap=""> If we're in the spirit of quoting Saggi, this suggestion is not compatible with "...mak[ing] the return value differ according to input ... is a big no no when talking about type safe APIs.". Dan. _______________________________________________ vdsm-devel mailing list <a class="moz-txt-link-abbreviated" href="mailto:vdsm-devel@lists.fedorahosted.org">vdsm-devel@lists.fedorahosted.org</a> <a class="moz-txt-link-freetext" href="https://lists.fedorahosted.org/mailman/listinfo/vdsm-devel&quo... </pre> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R &amp; D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com</pre> </body> </html> --------------090700020909000108020704--