Re: [Engine-devel] [Users] oVirt 3.3.2 release
by Bob Doolittle
Thanks. I considered that but I've been hesitant to try manual workarounds
in case my environment proves helpful for troubleshooting or verifying a
solution. Clearly the community needs a real fix, although the lack of
response to this issue surprised me. Must be the holidays :-)
-Bob
On Dec 21, 2013 4:55 AM, "Markus Stockhausen" <stockhausen(a)collogia.de>
wrote:
> We are on centos 6.5 and got similar dependency errors but simply replaced
> ovirt-release with ovirt-release-el6 in the guide. Afterwards everything
> worked smoothly.
>
> Do not know if it helps
>
> Von meinem Xperia™-Smartphone gesendet
>
> Bob Doolittle <bob(a)doolittle.us.com> schrieb:
>
>
> I think the problem may be other than I indicated, however, because I
> don't see ovirt-engine-3.3.2 in the FC19 stable repo either. Here's the
> error output of my update command:
>
> Error: Package: ovirt-engine-3.3.1-2.el6.noarch (@ovirt-stable)
> Requires: ovirt-engine-websocket-proxy = 3.3.1-2.el6
> Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch
> (@ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.1-2.el6
> Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch
> (ovirt-3.3.2)
> ovirt-engine-websocket-proxy = 3.3.2-1.el6
> Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch
> (ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.0-3.el6
> Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch
> (ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.0-4.el6
> Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch
> (ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.0.1-1.el6
> Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch
> (ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.1-1.el6
>
> I have attached my current repo config, after the update of
> ovirt-release-el6-10-1
>
> I'm not sure why it's not seeing
>
> http://resources.ovirt.org/releases/3.3.2/rpm/EL/6/noarch/ovirt-engine-3....
>
> I do see that repository enabled in "yum repolist enabled" output.
>
> -Bob
>
> On 12/20/2013 11:13 AM, Fabian Deutsch wrote:
> > Am Freitag, den 20.12.2013, 11:12 -0500 schrieb Bob Doolittle:
> >> I can't do an update of Engine for RHEL 6.
> >>
> >> The 3.3.2 packages do not seem to have been pushed here:
> >>
> >> http://resources.ovirt.org/releases/stable/rpm/EL/6/noarch/
> > Thanks - I observed the same.
> >
> > - fabian
> >
> >> -Bob
> >>
> >> On 12/19/2013 09:03 AM, Sandro Bonazzola wrote:
> >>> The oVirt development team is very happy to announce the general
> >>> availability of oVirt 3.3.2 as of December 19th 2013. This release
> >>> solidifies oVirt as a leading KVM management application and open
> >>> source alternative to VMware vSphere.
> >>>
> >>> oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
> >>> (or similar).
> >>>
> >>> This release of oVirt includes 175 bug fixes and the first release of
> the
> >>> Backup and Restore API, which enables backup programs to integrate
> with oVirt.
> >>> This release also simplifies the Guide Me VM-creation wizard. See the
> release
> >>> notes [1] for a list of the new features and bugs fixed.
> >>>
> >>> IMPORTANT NOTE: If you're upgrading from a previous version, please
> update
> >>> ovirt-release to the latest version (10) and verify you have the
> correct
> >>> repositories enabled by running the following commands
> >>>
> >>> # yum update ovirt-release
> >>> # yum repolist enabled
> >>>
> >>> before upgrading with the usual procedure. You should see the
> ovirt-3.3.2 and
> >>> ovirt-stable repositories listed in the output of the repolist command.
> >>>
> >>>
> >>>
> >>> [1] http://www.ovirt.org/OVirt_3.3.2_release_notes
> >>>
> >> _______________________________________________
> >> Arch mailing list
> >> Arch(a)ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/arch
>
10 years, 4 months
[Engine-devel] BUG: Typo in RSDL 3.3.2
by Sven Kieske
Hi,
in the rsdl you got:
link href="/api/hosts/{host:id}/forceselectspm"
rel="forceselectspm"><description>force the specified to be selected as
storage pool manager</description><request><http_method>POST</http_method>
it should read "force the specified host to be selected"
I think there are more of those, but I can't list them all atm.
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
10 years, 4 months
[Engine-devel] REST Error during VM creation
by Sven Kieske
Hi,
when we try to create a vm via REST-API, we get the following error
via REST:
<h1>HTTP Status 500 - org.codehaus.jackson.map.JsonMappingException:
(was java.lang.NullPointerException) (through reference chain:
org.ovirt.engine.api.model.VM["console"])</h1><HR size="1"
noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b>
<u>org.codehaus.jackson.map.JsonMappingException: (was
java.lang.NullPointerException) (through reference chain:
org.ovirt.engine.api.model.VM["console"])</u></p><p><b>description</b>
<u>The server encountered an internal error
(org.codehaus.jackson.map.JsonMappingException: (was
java.lang.NullPointerException) (through reference chain:
org.ovirt.engine.api.model.VM["console"])) that prevented it
from fulfilling this request.</u></p><HR size="1"
noshade="noshade"><h3>JBoss Web/7.0.13.Final</h3>
However, the vm is correctly created (see attached engine.log).
This is ovirt-engine 3.3.2-1.el6
Any suggestions?
We need to be able to get the correct response via API.
Should I open a BZ for this?
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
10 years, 4 months
[Engine-devel] UX: Display VM Downtime in the UI
by Adam Litke
Hi UX developers,
My recent change: http://gerrit.ovirt.org/#/c/22429/ adds support for
tracking the time a VM was last stopped and presenting it in the REST
API. I would also like to expose this information in the admin
portal. This feature has been requested by end users and is useful
for managing lots of VMs which may not be used frequently.
My idea is to change the 'Uptime' column in the VMs tab to 'Uptime /
Downtime' or some equivalent and more compact phrasing. If the VM is
Up, then last_start_time would be used to calculate uptime. If the VM
is Down, then last_stop_time would be used to calculate downtime.
This helps to make efficient use of the column space.
I am not sure how column sorting is being implemented, but if we
combine uptime and downtime into a single column we have an
opportunity to provide a really intuitive sort where the longest
uptime machines are at the top and the longest downtime machines are
at the bottom. This could be accomplished by treating uptime as a
positive interval and downtime as a negative interval.
Questions for you all:
- Do you support the idea of changing the Uptime column to include
Downtime as well or would you prefer a new column instead?
- Is there a better heading for the new column or is 'Uptime /
Downtime' good enough?
- How should we handle sorting?
Thanks for your input!
10 years, 4 months
[Engine-devel] Increasing the HTTP keep alive to 30 seconds
by Juan Hernandez
Hello,
We have an RFE that has been open for quite a long time requesting an
increase of the keep alive time in the HTTP communications between the
GUI applications and the web server:
https://bugzilla.redhat.com/833799
Implementing it should be as simple as modifying the setup application
so that it includes the modified KeepAlive directives in the web server
configuration, something like this:
KeepAlive on
KeepAliveTimeout 30
Is someone with knowledge of the setup application interested on taking
this?
Regards,
Juan Hernandez
--
Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
3ºD, 28016 Madrid, Spain
Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
10 years, 4 months
[Engine-devel] No-arg constructor required by default in backend "common" module's classes
by Vojtech Szocs
Hi guys,
in order to avoid potential errors related to GWT RPC serialization,
a recent patch [1] introduced the requirement for no-arg constructor
in backend "common" module's classes.
[1] http://gerrit.ovirt.org/#/c/21733/
(Even though we're planning to move away from GWT RPC to using REST API,
for the time being, this should prevent RPC related errors caused by
missing no-arg constructor, which are sometimes hard to trace.)
For a select few classes *not* involved in RPC communication, you
can add these in checkstyle-suppressions.xml file.
Vojtech
10 years, 4 months
[Engine-devel] Polling vs Pushing engine events
by Sven Kieske
Hi,
we got the following problem:
we create / start / stop
hole vms /data centers / storage etc
(basically: everything ovirt can handle
via REST-API)
But if you want to know e.g. the status
of a vm (or anything) you need to constantly
poll the API.
This is not what we desire to do, as it
does not scale very well (e.g. polling
100 vms).
Is there a standardized way of pushing information
from the engine?
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
10 years, 4 months
