[ATN] [ACTION REQUIRED] Tweaking engine CI flow
by Roy Golan
Hi all,
Eyal and I sat together to analyse and tweak the engine CI and this is what
we came up with:
- dao test excludes updated - exclude dal/src/main/bundles from invoking
dao tests
A trivial update of validation messages without any db change would
trigger dao test without any need. This is one less job run for lots of
patches.
This change is effective now.
- Spare CI re-run on trivial rebases
Gerrit trigger supports suppressing itself if the change to the tree was
trivial. Most of the waste of resources(time and IO :) ) is around
rebasing a change and waiting for CI to rerun. if Change1 is ci+1 and
Change2 is ci+1 the chances that they will break CI together is very small
and taking that risk is most probably worth it due to the huge resources
waste
This change isn't effective yet - *Please reply here* if you agree or not
to make this change available.
All of this is 'master' - 3.6 will follow if we will agree on activating
that change.
Thanks,
Roy
8 years, 1 month
Failing to run ovirt-system-tests using lago due to missing rpms
by Eyal Edri
Hi,
Anyone encountered these errors when running 3.6 basic suite on RHEL 7.2?
* STDERR
Error: Package: ovirt-engine-3.6.4.1-1.el6.noarch (localsync)
Requires: ovirt-iso-uploader >= 3.6.0
Error: Package: ovirt-engine-3.6.4.1-1.el6.noarch (localsync)
Requires: slf4j >= 1.7.0
Available: slf4j-1.5.8-8.el6.noarch (base)
slf4j = 1.5.8-8.el6
Error: Package: ovirt-engine-backend-3.6.4.1-1.el6.noarch (localsync)
Requires: ovirt-host-deploy-java >= 1.4.0
Error: Package: ovirt-engine-vmconsole-proxy-helper-3.6.4.1-1.el6.noarch
(localsync)
Requires: ovirt-vmconsole-proxy
Error: Package: ovirt-engine-3.6.4.1-1.el6.noarch (localsync)
Requires: ovirt-image-uploader >= 3.6.0
Error: Package: ovirt-engine-backend-3.6.4.1-1.el6.noarch (localsync)
Requires: ebay-cors-filter
Error: Package: ovirt-engine-setup-base-3.6.4.1-1.el6.noarch (localsync)
Requires: otopi >= 1.4.0
Error: Package: ovirt-engine-setup-plugin-ovirt-engine-3.6.4.1-1.el6.noarch
(localsync)
Requires: ovirt-engine-extension-aaa-jdbc
Error: Package: ovirt-engine-3.6.4.1-1.el6.noarch (localsync)
Requires: ovirt-engine-wildfly >= 8.2.1
Error: Package:
ovirt-engine-setup-plugin-ovirt-engine-common-3.6.4.1-1.el6.noarch
(localsync)
Requires: ovirt-setup-lib
Error: Package: ovirt-engine-backend-3.6.4.1-1.el6.noarch (localsync)
Requires: vdsm-jsonrpc-java >= 1.1.8
Error: Package: ovirt-engine-backend-3.6.4.1-1.el6.noarch (localsync)
Requires: ovirt-engine-extension-aaa-jdbc
# [Thread-3] Deploy VM lago_basic_suite_3_6_engine: ERROR (in 0:01:59)
Error while running thread
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/lago/utils.py", line 46, in
_ret_via_queue
queue.put({'return': func()})
File "/usr/lib/python2.7/site-packages/ovirtlago/__init__.py", line 472,
in _deploy_host
host.name(),
RuntimeError:
/home/eedri/lago/ovirt-system-tests/basic_suite_3.6/deploy-scripts/setup_engine.sh
failed with status 1 on lago_basic_suite_3_6_engine
@ Deploy oVirt environment: ERROR (in 0:01:59)
Error occured, aborting
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/ovirtlago/cmd.py", line 248, in
do_run
self.cli_plugins[args.ovirtverb].do_run(args)
File "/usr/lib/python2.7/site-packages/lago/plugins/cli.py", line 180, in
do_run
self._do_run(**vars(args))
File "/usr/lib/python2.7/site-packages/lago/utils.py", line 501, in
wrapper
return func(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/lago/utils.py", line 512, in
wrapper
return func(*args, prefix=prefix, **kwargs)
File "/usr/lib/python2.7/site-packages/ovirtlago/cmd.py", line 174, in
do_deploy
prefix.deploy()
File "/usr/lib/python2.7/site-packages/lago/log_utils.py", line 598, in
wrapper
func(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/ovirtlago/__init__.py", line 52,
in wrapper
return func(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/ovirtlago/__init__.py", line 480,
in deploy
self._deploy_host, self.virt_env.get_vms().values()
File "/usr/lib/python2.7/site-packages/lago/utils.py", line 88, in
invoke_in_parallel
vt.join_all()
File "/usr/lib/python2.7/site-packages/lago/utils.py", line 46, in
_ret_via_queue
queue.put({'return': func()})
File "/usr/lib/python2.7/site-packages/ovirtlago/__init__.py", line 472,
in _deploy_host
host.name(),
RuntimeError:
/home/eedri/lago/ovirt-system-tests/basic_suite_3.6/deploy-scripts/setup_engine.sh
failed with status 1 on lago_basic_suite_3_6_engine
--
Eyal Edri
Associate Manager
RHEV DevOps
EMEA ENG Virtualization R&D
Red Hat Israel
phone: +972-9-7692018
irc: eedri (on #tlv #rhev-dev #rhev-integ)
8 years, 1 month
Engine 3.6.5 has been branched out
by Tal Nisan
A new branch ovirt-engine-3.6.5 has been branched out from the
ovirt-engine-3.6 branch please note that:
- 3.6.5 patches will now have to be backported to the new branch as well as
the 3.6 branch
- 3.6.6 patches should only be merged to the 3.6 branch only
All 3.6.6 patches that were backported to the 3.6 and were pending the
branching out can now be merged, please rebase and verify again.
8 years, 1 month
Hello and a question about QEMU log
by zhukaijie
Hello,
Each running VM has it's command line logged in /var/log/libvirt/qemu/${vmname}. And now I'd like to disable this log function, that is to say, not to record the QEMU command line of VM. Could you please tell me will can I configure it?
Best wishes.
8 years, 1 month
[ANN] oVirt 3.6.4 Final Release is now available
by Sandro Bonazzola
The oVirt Project is pleased to announce today the general availability of
oVirt 3.6.4.
This latest community release includes numerous bug fixes for
- ovirt-engine
- vdsm
- ovirt-hosted-engine-setup
- ovirt-hosted-engine-ha
oVirt is an open-source, openly-governed enterprise virtualization
management application, developed by a global community. You can use the
oVirt management interface (oVirt Engine) to manage hardware nodes, storage
and network resources, and to deploy and monitor virtual machines running
in your data center.
If you are familiar with VMware products, oVirt is conceptually similar to
vSphere. oVirt serves as the bedrock for Red Hat's Enterprise
Virtualization product, and it is the "upstream" project where new features
are developed prior to their inclusion in Red Hat's supported product
offering.
Additional Resources:
* Read more about the oVirt 3.6.4 release highlights:
http://www.ovirt.org/release/3.6.4/
* Get more oVirt Project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
8 years, 1 month
HEADS UP: otopi - enforce priority and other changes
by Yedidyah Bar David
Hi all,
In two days or so, we are going to merge [1].
Without it, if you have events (functions with a '@plugin.event'
decoration) that due to before=/after= requirements, otopi could not
comply with their priority=, it will continue, ignoring this and only
writing a message to the console if you set OTOPI_DEBUG=1.
With this change, it will fail.
Under normal circumstances, you'll see nothing in the console or the
log, just an exit code of 1.
If you set an environment variable OTOPI_DEBUG=1, it will emit a
"RuntimeError: Priorities were reversed during buildSequence" error,
see examples below.
You can restore the existing behavior by setting another env var
OTOPI_ALLOW_PRIORITY_OVERRIDE=1 .
Soon thereafter, we are going to merge [2]. This will replace the
algorithm that is used to decide what to run when. In principle, after
[1] is merged, they should be compatible. However, the new algorithm
does not allow overriding priorities. To revert to the old algorithm,
you can set env var OTOPI_ALLOW_LEGACY_BUILDSEQ=1 . The old algorithm
(and this option) is intended to be removed eventually, probably after
oVirt 4.0 is released.
Patches to make engine-setup (engine+dwh+reports) and host-deploy
compatible with the new behavior were already merged to master
branches. Still we most likely forgot some other tools/flows/etc., so
if you encounter such failures please open a bug against the relevant
tool.
On a more positive (?) side, we also recently added a new package to
master, called otopi-debug-plugins. It currently includes two plugins,
which are not enabled by default. One of them allows you to get a
prompt 'Press Enter to continue' on [ERROR], so it's easier to have a
look at the system before the tool might try to rollback or something,
the other allows you to enforce a failure at a certain stage, which
might be useful to debug/verify failures and especially rollbacks.
More details about these are in a new README file [3].
[1] https://gerrit.ovirt.org/55329
[2] https://gerrit.ovirt.org/28775
[3] https://gerrit.ovirt.org/gitweb?p=otopi.git;a=blob;f=README.debug-plugins
Examples:
1.
# ovirt-host-deploy
# echo $?
1
2.
# OTOPI_DEBUG=1 ovirt-host-deploy 2>&1 | tail
Priorities were reversed during buildSequence: method <bound method
?._init of <otopi.plugins.otopi.core.log.Plugin object at
0x7f9827c9fe10>> with priority 2000 appears after method <bound method
?._preinit of <otopi.plugins.ovirt_host_deploy.core.misc.Plugin object
at 0x1032990>> with priority 5000
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/otopi/__main__.py", line 88, in main
installer.execute()
File "/usr/lib/python2.7/site-packages/otopi/main.py", line 151, in execute
self.context.buildSequence()
File "/usr/lib/python2.7/site-packages/otopi/context.py", line 400,
in buildSequence
raise RuntimeError(msg)
RuntimeError: Priorities were reversed during buildSequence: method
<bound method ?._init of <otopi.plugins.otopi.core.log.Plugin object
at 0x7f9827c9fe10>> with priority 2000 appears after method <bound
method ?._preinit of <otopi.plugins.ovirt_host_deploy.core.misc.Plugin
object at 0x1032990>> with priority 5000
('FATAL Internal error (main): Priorities were reversed during
buildSequence: method <bound method ?._init of
<otopi.plugins.otopi.core.log.Plugin object at 0x7f9827c9fe10>> with
priority 2000 appears after method <bound method ?._preinit of
<otopi.plugins.ovirt_host_deploy.core.misc.Plugin object at
0x1032990>> with priority 5000',)
3.
# OTOPI_DEBUG=1 OTOPI_ALLOW_PRIORITY_OVERRIDE=1 ovirt-host-deploy
...
Priorities were reversed during buildSequence: method <bound method
?._init of <otopi.plugins.otopi.core.log.Plugin object at
0x7fbe17f51e10>> with priority 2000 appears after method <bound method
?._preinit of <otopi.plugins.ovirt_host_deploy.core.misc.Plugin object
at 0x107f8d0>> with priority 5000
[ INFO ] Stage: Initializing
Continuing will configure this host for serving as
hypervisor. Are you sure you want to continue? (yes/no)
And with [2]:
4.
# OTOPI_DEBUG=1 ovirt-host-deploy
...
_toposortBuildSequence failed: Cyclic dependencies found
('FATAL Internal error (main): Cyclic dependencies found',)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/otopi/__main__.py", line 88, in main
installer.execute()
File "/usr/lib/python2.7/site-packages/otopi/main.py", line 151, in execute
self.context.buildSequence()
File "/usr/lib/python2.7/site-packages/otopi/context.py", line 665,
in buildSequence
self._sequence = self._toposortBuildSequence()
File "/usr/lib/python2.7/site-packages/otopi/context.py", line 624,
in _toposortBuildSequence
raise RuntimeError(_('Cyclic dependencies found'))
RuntimeError: Cyclic dependencies found
5.
# OTOPI_DEBUG=1 OTOPI_ALLOW_PRIORITY_OVERRIDE=1 ovirt-host-deploy
(fails the same way as (4.))
6.
# OTOPI_ALLOW_LEGACY_BUILDSEQ=1 OTOPI_DEBUG=1 ovirt-host-deploy
(fails similarly to (2.) - you'll see more-or-less outputs of (4.)
then (2.) combined)
7.
# OTOPI_ALLOW_LEGACY_BUILDSEQ=1 OTOPI_DEBUG=1
OTOPI_ALLOW_PRIORITY_OVERRIDE=1 ovirt-host-deploy
(succeeds like (3.), but with part of the output of (4.) before that)
Best regards,
--
Didi
8 years, 1 month
Workaround for Gerrit 'Internal Server Error' after deleting draft
by Tomer Saban
Hi,
I came across a bug in Gerrit when trying to delete a draft. It seems that it ruins
the patchset(Gerrit doens't set the new last revision properly).
So, in order to fix this issue we need to reset the last revision.
In order, to do that you need to find the last revision after deleting the draft(Let's assume it's 23).
Once, you have that you need to number of the patch in gerrit. For example, the number in:
https://gerrit.ovirt.org/#/c/51636/ is 51636.
Last, You need to run the following line from the shell:
ssh gerrit.ovirt.org gerrit review --rebase 51636,23
FYI,
Tomer
8 years, 1 month
VDSM Network Tests
by Paul Maidment
I notice that on my build of VDSM, the network test.
functional/networkTests.py:testDhcpReplaceNicWithBridge
Fails on the assertion that the address will not change (the dnsmasq dhcp
server returns a new address for the same mac)
Can anyone reproduce this?
8 years, 1 month
ovirtm Hosts reinstall button
by Paul Dyer
Hi,
can anyone explain what this button does? I have looked in the
documentation but have found no reference to it. Will reinstall only
install packages and setting for the host, and leave
cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the
message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and
cannot join Cluster...". The host was part of a 3.5 cluster until the
upgrade to 3.6.2.
Thanks a million,
Paul
--
Paul Dyer,
Mercury Consulting Group, RHCE
504-302-8750
8 years, 1 month
