Conflicting ovs-2.10 and dpdk libraries
by Miguel Duarte de Mora Barroso
Hello all,
I've seen many of you reach this same problem over the last week when
updating ovirt-engine - or node - to the 4.3 candidate.
The following is an excerpt of the error:
-> Finished Dependency Resolution
Error: Package: 1:openvswitch-ovn-common-2.10.0-1.el7.x86_64
(centos-ovirt43-testing)
Requires: librte_pmd_mlx4.so.1()(64bit)
Available: dpdk-17.11-13.el7.x86_64 (rhel-7.6-extras)
librte_pmd_mlx4.so.1()(64bit)
Installed: 2:dpdk-17.11-3.el7.x86_64 (@centos-ovirt43-testing)
Not found
Error: Package: 1:openvswitch-ovn-common-2.10.0-1.el7.x86_64
(centos-ovirt43-testing)
Requires: librte_power.so.1()(64bit)
Available: dpdk-17.11-13.el7.x86_64 (rhel-7.6-extras)
librte_power.so.1()(64bit)
Installed: 2:dpdk-17.11-3.el7.x86_64 (@centos-ovirt43-testing)
Not found
Error: Package: 1:openvswitch-ovn-common-2.10.0-1.el7.x86_64
(centos-ovirt43-testing)
Requires: librte_pmd_mlx5.so.1()(64bit)
Available: dpdk-17.11-13.el7.x86_64 (rhel-7.6-extras)
librte_pmd_mlx5.so.1()(64bit)
Installed: 2:dpdk-17.11-3.el7.x86_64 (@centos-ovirt43-testing)
Not found
...
Should you stumble into this situation, remove the currently installed
dpdk version (yum remove "dpdk*") then install it again - this time
assuring it is installed from the extras repo.
After that, installation should proceed smoothly.
Regards,
Miguel
6 years
Re: [EXTERNAL] Re: List of Queries related to RHV
by Pavan Chavva
Bumping this thread as the last update from Veritas did not reflect in
OVirt Devel list.
Best,
Pavan.
On Wed, Oct 17, 2018 at 10:03 AM Mahesh Falmari <Mahesh.Falmari(a)veritas.com>
wrote:
> Thanks for the prompt response on these queries. We have few follow-up
> queries mentioned inline.
>
>
>
> Thanks & Regards,
> Mahesh Falmari
>
>
>
> *From:* Yaniv Lavi <ylavi(a)redhat.com>
> *Sent:* Tuesday, October 16, 2018 7:19 PM
> *To:* Mahesh Falmari <Mahesh.Falmari(a)veritas.com>
> *Cc:* Nir Soffer <nsoffer(a)redhat.com>; Erez, Daniel <derez(a)redhat.com>;
> Tal Nisan <tnisan(a)redhat.com>; Pavan Chavva <pchavva(a)redhat.com>; devel <
> devel(a)ovirt.org>; James Olson <James.Olson(a)veritas.com>; Navin Tah <
> Navin.Tah(a)veritas.com>; Sudhakar Paulzagade <
> Sudhakar.Paulzagade(a)veritas.com>; Abhay Marode <Abhay.Marode(a)veritas.com>;
> Suchitra Herwadkar <Suchitra.Herwadkar(a)veritas.com>; Nirmalya Sirkar <
> Nirmalya.Sirkar(a)veritas.com>; Abhijeet Barve <Abhijeet.Barve(a)veritas.com>
> *Subject:* [EXTERNAL] Re: List of Queries related to RHV
>
>
>
>
> *YANIV LAVI*
>
> SENIOR TECHNICAL PRODUCT MANAGER
>
> Red Hat Israel Ltd. <https://www.redhat.com/>
>
> 34 Jerusalem Road, Building A, 1st floor
>
> Ra'anana, Israel 4350109
>
> ylavi(a)redhat.com T: +972-9-7692306/8272306 F: +972-9-7692223
> IM: ylavi
>
> <https://red.ht/sig>
>
> *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
>
> @redhatnews <https://twitter.com/redhatnews> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc>
>
>
>
> On Tue, Oct 16, 2018 at 4:35 PM Mahesh Falmari <Mahesh.Falmari(a)veritas.com>
> wrote:
>
> Hi Nir,
>
> We have few queries with respect to RHV which we would like to understand
> from you.
>
>
>
> *1. Does RHV maintains the virtual machine configuration file in back end?*
>
> Just like we have configuration files for other hypervisors like for
> VMware it is .vmx and for Hyper-V, it is .vmcx which captures most of the
> virtual machine configuration information in that. On the similar lines,
> does RHV also maintains such file? If not, what is the other way to get all
> the virtual machine configuration information from a single API?
>
>
>
> There is a OVF storage, but this is not meant for consumption.
>
> Please follow the first section in:
>
> *https://ovirt.org/develop/release-management/features/storage/backup-restore-disk-snapshots/
> <https://ovirt.org/develop/release-management/features/storage/backup-rest...>*
>
> This explains how to use the API to get a OVF for a VM.
>
>
>
>
>
> *2. Is VM UUID the only way to uniquely identify virtual machine in the
> RHV infrastructure?*
>
> What we understand is that VM UUID is the way to identify virtual machine
> uniquely in the RHV infrastructure. Would like to know any other way than
> this?
>
>
>
> UUID is the way to do this.
>
>
>
>
>
> *3. Do we have any version associated with the virtual machine?*
>
> Just like we have hardware version in case of VMware and virtual machine
> version in case of Hyper-V, does RHV also associate any such version with
> virtual machine?
>
>
>
> The HW version is based on the VM machine type.
>
> [Mahesh] Can you please elaborate more on this? How simply VM machine
> type going to determine it’s version?
>
>
>
> *4. Is it possible to create virtual machines with QCOW2 as base disks
> instead of RAW?*
>
> We would like to understand if there are any use cases customers prefer
> creating virtual machines from QCOW2 as base disks instead of RAW ones.
>
>
>
> That is a possibility in cases of thin disk on file storage.
>
> [Mahesh] Can you please elaborate more on this?
>
>
>
> *5. RHV Deployment*
>
> What kind of deployments you have come across in the field? Does customers
> scale their infrastructure by adding more datacenters/clusters/nodes or
> they add more RHV managers? What scenarios trigger having more than one RHV
> manager?
>
>
>
> We are all kind with oVirt. I depends on the use case.
>
>
>
>
>
> *6. Image transfer*
>
> We are trying to download disk chunks using multiple threads to improve
> performance of reading data from RHV. Downloading 2 disk chunks
> simultaneously via threads should take approximately the same time. But
> from our observations this takes roughly 1.5 times.
> Can RHVM server requests in parallel, if so are there any settings that
> need to be tweaked?
>
> Here is an example:
> Request 1 for chunk 1 from thread 1, Range: bytes=0-1023
> Request 2 for chunk 2 from thread 2, Range: bytes=1024-2047
> Takes roughly 1.5 seconds, whereas a single request would take 1 second.
> Expecting it to take just around 1 second.
>
> [Mahesh] Seeking response to this query.
>
> *7. Free and Thaw operation*
>
> For cinder based VM, API recommended for FS consistent backup.
>
> - POST /api/vms/<ID>/freezefilesystems
> - POST /api/vms/<ID>/thawfilesystems
>
> Why do we need this whereas it is not required for other storage?
>
> Creating a snapshot does this for you in a case where you have the oVirt
> guest agent install on the guest.
>
> [Mahesh] Thanks, we would also like to understand is there a way to
> control crash/app consistent snapshots through REST APIs?
>
>
>
> Thanks & Regards,
> Mahesh Falmari
>
>
>
>
--
PAVAN KUMAR CHAVVA
ENGINEERING PARTNER MANAGER
Red Hat
pchavva(a)redhat.com M: 4793219099 IM: pchavva
6 years
Parsing gwt rpc messages
by Anastasiya Ruzhanskaya
Hello everyone!
I am trying to determine how the person who knows for example all necessary
function calls and parameters can determine the content of the message sent.
This is an example of the message I am trying to parse
(I already separated it on some meaningful parts), numbers in braces just
help to make correspondence between payload and strings:
7|
0|
14|
(1)https://engine.localdomain/ovirt-engine/webadmin/| //URL
(2)E8B2AD24442204349EF795039C3B87E5| // policy name
(3)org.ovirt.engine.ui.frontend.gwtservices.GenericApiGWTService| service
interface
(4)runMultipleActions| name of the method
(5)org.ovirt.engine.core.common.action.ActionType/12242454|,
(6)java.util.ArrayList/4159755760|,
(7)Z| ( two times)) // bool type
(8)org.ovirt.engine.core.common.action.ShutdownVmParameters/1694554255|
(9)org.ovirt.engine.core.compat.Guid/1992968158|
(10)java.util.UUID/2940008275|
(11)org.ovirt.engine.core.common.action.ActionParametersBase$EndProcedure/1568822488|
(12)java.util.Collections$EmptyMap/4174664486|
(13)org.ovirt.engine.core.common.businessentities.VDSStatus/1938301532|
(14)org.ovirt.engine.core.compat.TransactionScopeOption/1475850853|
(the following is the payload separated and commented in places where I can
understand it)
1|
2|
3|
4|
4|- 4 method parameters
5|- first type = ActionType
6|- second type = arraylist
7|- third type = boolean
7|- fourth type = boolean
5(actionType)|9 (shutdown)|
6(arrayList)|1(??)|
8 (shutdown vm parameters, list object)|1|0|0|0|(??)
9 (guid, ?)|10(UUID)|J$m4mk9wVi3|MjeP460Xkpb (vm
uuid)|0|5|0|0|0|11|1|0|6|0|0|0|0|0|0|12|0|-6|13|0|1|0|1|14|2|0|0|0|0|0|
Until vm uuid parameter it is kind of clear what is happening, but I still
wonder what do the parameters 1 and 0 mean in places marked as (??). I
understand, that there is a method called runMultipleActions and it has
four parameters. I found in source examples of calling this method
(ovirt-engine/frontend/webadmin/modules/./frontend/src/test/java/org/ovirt/engine/ui/frontend/FrontendActionTest.java).Then
I determine types of these parameters. Then the type of action performed (
I shut down the machine). Then there should be an ArrayList, which
contains several objects. I assume that 8(shutdown vm parameters) should
follow right after 6 (arraylist), but there a "1" which I can't explain.
Also for shutdown parameters: I see in examples that there are not so many
boolean parameters in constructor there. Here are four! (1|0|0|0) What do
they mean? And how can I cope with the left payload?
Thank you in advance for any help!
P.S. Also vm ids have another format when for example I do the same
actions from web - ui: c8de3f8e-b45e-4a5b-9fa6-e2693dc158b7. Why this is so?
6 years
jobs failure due to same package version with different checksum
by Dafna Ron
Hi,
We have been having failure in master for different projects due to package
ovirt-ansible-disaster-recovery-1.1.2-1.el7.noarch.rpm.
It seems the package had been changed without a new version set which means
we have the same exact package with two different checksum (one in 4.2 and
one in master):
ovirt-4.2:
[dron@resources02 noarch]$ md5sum
ovirt-ansible-disaster-recovery-1.1.2-1.el7.noarch.rpm
07b2c6c7ef94e48be3c197e2a1d45d81
ovirt-ansible-disaster-recovery-1.1.2-1.el7.noarch.rpm
ovirt-master:
[dron@resources02 noarch]$ md5sum
ovirt-ansible-disaster-recovery-1.1.2-1.el7.noarch.rpm
f6b2e88ae07b64d5071696ade510d961
ovirt-ansible-disaster-recovery-1.1.2-1.el7.noarch.rpm
Can you please create a new package with version change to solve
this problem?
Thanks,
Dafna
6 years
How does the host synchronizes existing storage domains when added to engine?
by Tianyuan Wang
hi all,
We are developing for supporting ceph as a new storage domain type. It went
well when creating and using. But we cannot add a new host to the engine
when there is already a ceph-StorageDomain.
The engine reports "VDSM node1 command ConnectStoragePoolVDS failed: Cannot
find master domain" and set the node to "Non Operational" status. The vdsm
log reports error like this:
INFO (jsonrpc/0) [vdsm.api] FINISH connectStoragePool error=Cannot find
master domain: u'spUUID=5bc95ba9-01f7-0307-0342-000000000033,
msdUUID=a3d6903d-07d5-4794-9667-9dddc3c84fe6'
from=::ffff:192.168.122.22,40166, flow_id=43b39e00,
task_id=4128f9d4-3c92-46ed-a230-2505d3a8ddb9 (api:50)
2018-10-24 11:06:22,227+0800 ERROR (jsonrpc/0) [storage.TaskManager.Task]
(Task='4128f9d4-3c92-46ed-a230-2505d3a8ddb9') Unexpected error (task:875)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882,
in _run
return fn(*args, **kargs)
File "<string>", line 2, in connectStoragePool
File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 48, in
method
ret = func(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 1032,
in connectStoragePool
spUUID, hostID, msdUUID, masterVersion, domainsMap)
File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 1094,
in _connectStoragePool
res = pool.connect(hostID, msdUUID, masterVersion)
File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 704, in
connect
self.__rebuild(msdUUID=msdUUID, masterVersion=masterVersion)
File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 1275, in
__rebuild
self.setMasterDomain(msdUUID, masterVersion)
File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 1488, in
setMasterDomain
raise se.StoragePoolMasterNotFound(self.spUUID, msdUUID)
StoragePoolMasterNotFound: Cannot find master domain:
u'spUUID=5bc95ba9-01f7-0307-0342-000000000033,
msdUUID=a3d6903d-07d5-4794-9667-9dddc3c84fe6'
After tracing back, I found that there is no local file path under
/rhev/data-center/mnt for the storage domain, so it cannot find storage
domain when ConnectStoargeSever runs. It only happens when adding a new
host to engine and there is already a ceph-StroageDomain in ovirt.
So how does the host synchronized the existing storage domains? And what
can I do to fix this?
Thanks in advance!
Yours Sincerely,
Tianyuan
6 years
Live merge of snapshot
by Abhay Marode
Hi,
In case of snapshot creation and deletion of VM with chain of snapshots
I observed following behavior while deleting the snapshot,
* When VM is powered ON, I could see two events in event manager, 1) initiated snapshot deletion 2) snapshot deletion successful
* When VM is powered OFF, I saw three events 1) initiated snapshot deletion 2) merge snapshot 'Active VM' into 'snap1' 3) snapshot deletion successful.
Why there is difference in events based on power state of VM?
Do we free up the storage in deletion of snapshot?
Here are config details:
Host OS Version:
RHEL - 7.5 - 4.3.el7
OS Description:
Red Hat Virtualization Host 4.2.4 (el7.5)
Kernel Version:
3.10.0 - 862.6.3.el7.x86_64
KVM Version:
2.10.0 - 21.el7_5.4
LIBVIRT Version:
libvirt-3.9.0-14.el7_5.6
VDSM Version:
vdsm-4.20.31-1.el7ev
SPICE Version:
0.14.0 - 2.el7_5.4
GlusterFS Version:
glusterfs-3.8.4-54.10.el7rhgs
CEPH Version:
librbd1-0.94.5-2.el7
Kernel Features:
PTI: 1, IBRS: 0, RETP: 1
Regards,
-Abhay
6 years
FOSDEM‘19 Virtualization & IaaS Devroom CfP
by Sandro Bonazzola
We are excited to announce that the call for proposals is now open for the
Virtualization & IaaS devroom at the upcoming FOSDEM 2019, to be hosted on
February 2nd 2019.
This year will mark FOSDEM’s 19th anniversary as one of the longest-running
free and open source software developer events, attracting thousands of
developers and users from all over the world. FOSDEM will be held once
again in Brussels, Belgium, on February 2nd & 3rd, 2019.
This devroom is a collaborative effort, and is organized by dedicated folks
from projects such as OpenStack, Xen Project, oVirt, QEMU, KVM, and
Foreman. We would like to invite all those who are involved in these fields
to submit your proposals by December 1st, 2018.
About the Devroom
The Virtualization & IaaS devroom will feature session topics such as open
source hypervisors and virtual machine managers such as Xen Project, KVM,
bhyve, and VirtualBox, and Infrastructure-as-a-Service projects such as
KubeVirt, Apache CloudStack, OpenStack, oVirt, QEMU and OpenNebula.
This devroom will host presentations that focus on topics of shared
interest, such as KVM; libvirt; shared storage; virtualized networking;
cloud security; clustering and high availability; interfacing with multiple
hypervisors; hyperconverged deployments; and scaling across hundreds or
thousands of servers.
Presentations in this devroom will be aimed at developers working on these
platforms who are looking to collaborate and improve shared infrastructure
or solve common problems. We seek topics that encourage dialog between
projects and continued work post-FOSDEM.
Important Dates
Submission deadline: 1 December 2019
Acceptance notifications: 14 December 2019
Final schedule announcement: 21 December 2019
Devroom: 2nd February 2019
Submit Your Proposal
All submissions must be made via the Pentabarf event planning site[1].
If you have not used Pentabarf before, you will need to create an account.
If you submitted proposals for FOSDEM in previous years, you can use your
existing account.
After creating the account, select Create Event to start the submission
process. Make sure to select Virtualization and IaaS devroom from the Track
list. Please fill out all the required fields, and provide a meaningful
abstract and description of your proposed session.
Submission Guidelines
We expect more proposals than we can possibly accept, so it is vitally
important that you submit your proposal on or before the deadline. Late
submissions are unlikely to be considered.
All presentation slots are 30 minutes, with 20 minutes planned for
presentations, and 10 minutes for Q&A.
All presentations will be recorded and made available under Creative
Commons licenses. In the Submission notes field, please indicate that you
agree that your presentation will be licensed under the CC-By-SA-4.0 or
CC-By-4.0 license and that you agree to have your presentation recorded.
For example:
"If my presentation is accepted for FOSDEM, I hereby agree to license all
recordings, slides, and other associated materials under the Creative
Commons Attribution Share-Alike 4.0 International License. Sincerely,
<NAME>."
In the Submission notes field, please also confirm that if your talk is
accepted, you will be able to attend FOSDEM and deliver your presentation.
We will not consider proposals from prospective speakers who are unsure
whether they will be able to secure funds for travel and lodging to attend
FOSDEM. (Sadly, we are not able to offer travel funding for prospective
speakers.)
Speaker Mentoring Program
As a part of the rising efforts to grow our communities and encourage a
diverse and inclusive conference ecosystem, we're happy to announce that
we'll be offering mentoring for new speakers. Our mentors can help you with
tasks such as reviewing your abstract, reviewing your presentation outline
or slides, or practicing your talk with you.
You may apply to the mentoring program as a newcomer speaker if you:
- Never presented before or
- Presented only lightning talks or
- Presented full-length talks at small meetups (<50 ppl)
Submission Guidelines
Mentored presentations will have 25-minute slots, where 20 minutes will
include the presentation and 5 minutes will be reserved for questions.
The number of newcomer session slots is limited, so we will probably not be
able to accept all applications.
You must submit your talk and abstract to apply for the mentoring program,
our mentors are volunteering their time and will happily provide feedback
but won't write your presentation for you!
If you are experiencing problems with Pentabarf, the proposal submission
interface, or have other questions, you can email our devroom mailing
list[2] and we will try to help you.
How to Apply
In addition to agreeing to video recording and confirming that you can
attend FOSDEM in case your session is accepted, please write "speaker
mentoring program application" in the "Submission notes" field, and list
any prior speaking experience or other relevant information for your
application.
Call for Mentors
Interested in mentoring newcomer speakers? We'd love to have your help!
Please email iaas-virt-devroom at lists.fosdem.org with a short speaker
biography and any specific fields of expertise (for example, KVM,
OpenStack, storage, etc.) so that we can match you with a newcomer speaker
from a similar field. Estimated time investment can be as low as a 5-10
hours in total, usually distributed weekly or bi-weekly.
Never mentored a newcomer speaker but interested to try? As the mentoring
program coordinator, email Brian Proffitt[3] and he will be happy to answer
your questions!
Code of Conduct
Following the release of the updated code of conduct for FOSDEM, we'd like
to remind all speakers and attendees that all of the presentations and
discussions in our devroom are held under the guidelines set in the CoC and
we expect attendees, speakers, and volunteers to follow the CoC at all
times.
If you submit a proposal and it is accepted, you will be required to
confirm that you accept the FOSDEM CoC. If you have any questions about the
CoC or wish to have one of the devroom organizers review your presentation
slides or any other content for CoC compliance, please email us and we will
do our best to assist you.
Call for Volunteers
We are also looking for volunteers to help run the devroom. We need
assistance watching time for the speakers, and helping with video for the
devroom. Please contact Brian Proffitt, for more information.
Questions?
If you have any questions about this devroom, please send your questions to
our devroom mailing list. You can also subscribe to the list to receive
updates about important dates, session announcements, and to connect with
other attendees.
See you all at FOSDEM!
[1] https://penta.fosdem.org/submission/FOSDEM17
[2] iaas-virt-devroom at lists.fosdem.org
[3] bkp at redhat.com
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=70...>
6 years
[ OST Failure Report ] [ oVirt Master (ovirt-engine) ] [ 14-09-2018 ] [ 002_bootstrap.add_hosts ]
by Dafna Ron
Hi,
The previous regression was resolved and we now have a new regression.
I don't think that the reported change is related so can someone from
ovirt-engine take a look?
The failure is add host on the upgrade suite.
Please note that we have not had an engine-ovirt build for over 10 days due
to several consecutive regressions and I would ask you to stop merging
until we can stabilize the project and have a new package of engine.
error:
2018-09-14 05:51:07,670-04 INFO
[org.ovirt.engine.core.uutils.ssh.SSHDialog]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] SSH execute
'root@lago-upgrade-from-release-suite-master-host-0' 'umask 0077;
MYTMP="$(TMPDIR="${OVIRT_TMPDIR}" mktemp -d -t ovirt-XXXXXXXXXX)"; trap
"chmod -R u+rwX \"${MYTMP}\" > /dev/null 2>&1; rm -fr \"${MYTMP}\" >
/dev/null 2>&1" 0; tar -b1 --warning=no-timestamp -C "${MYTMP}" -x &&
"${MYTMP}"/ovirt-host-deploy DIALOG/dialect=str:machine
DIALOG/customization=bool:True'
2018-09-14 05:51:08,550-04 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(VdsDeploy) [5c91fcbd] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing
Host lago-upgrade-from-release-suite-master-host-0. Stage: Initializing.
2018-09-14 05:51:08,565-04 INFO
[org.ovirt.engine.core.utils.transaction.TransactionSupport] (VdsDeploy)
[5c91fcbd] transaction rolled back
2018-09-14 05:51:08,574-04 ERROR
[org.ovirt.engine.core.bll.hostdeploy.VdsDeployBase] (VdsDeploy) [5c91fcbd]
Error during deploy dialog
2018-09-14 05:51:08,578-04 ERROR
[org.ovirt.engine.core.bll.hostdeploy.VdsDeployBase]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] Error during host
lago-upgrade-from-release-suite-master-host-0 install
2018-09-14 05:51:08,586-04 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] EVENT_ID:
VDS_INSTALL_IN_PROGRESS_ERROR(511), An error has occurred during
installation of Host lago-upgrade-from-release-suite-master-host-0:
CallableStatementCallback; SQL [{call insertauditlog(?, ?, ?, ?, ?, ?, ?,
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
?, ?)}ERROR: invalid byte sequence for encoding "UTF8": 0x00; nested
exception is org.postgresql.util.PSQLException: ERROR: invalid byte
sequence for encoding "UTF8": 0x00.
2018-09-14 05:51:08,586-04 ERROR
[org.ovirt.engine.core.bll.hostdeploy.VdsDeployBase]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] Error during host
lago-upgrade-from-release-suite-master-host-0 install, preferring first
exception: CallableStatementCallback; SQL [{call insertauditlog(?, ?, ?, ?,
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
?, ?, ?, ?, ?)}ERROR: invalid byte sequence for encoding "UTF8": 0x00;
nested exception is org.postgresql.util.PSQLException: ERROR: invalid byte
sequence for encoding "UTF8": 0x00
2018-09-14 05:51:08,586-04 ERROR
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] Host installation
failed for host 'e475e93a-63b3-4573-b242-162c2ed864f0',
'lago-upgrade-from-release-suite-master-host-0': CallableStatementCallback;
SQL [{call insertauditlog(?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)}ERROR: invalid byte
sequence for encoding "UTF8": 0x00; nested exception is
org.postgresql.util.PSQLException: ERROR: invalid byte sequence for
encoding "UTF8": 0x00
2018-09-14 05:51:08,615-04 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] START,
SetVdsStatusVDSCommand(HostName =
lago-upgrade-from-release-suite-master-host-0,
SetVdsStatusVDSCommandParameters:{hostId='e475e93a-63b3-4573-b242-162c2ed864f0',
status='InstallFailed', nonOperationalReason='NONE',
stopSpmFailureLogged='false', maintenanceReason='null'}), log id: 146cdc08
2018-09-14 05:51:08,626-04 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] FINISH,
SetVdsStatusVDSCommand, return: , log id: 146cdc08
2018-09-14 05:51:08,639-04 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] EVENT_ID:
VDS_INSTALL_FAILED(505), Host lago-upgrade-from-release-suite-master-host-0
installation failed. CallableStatementCallback; SQL [{call
insertauditlog(?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)}ERROR: invalid byte sequence for
encoding "UTF8": 0x00; nested exception is
org.postgresql.util.PSQLException: ERROR: invalid byte sequence for
encoding "UTF8": 0x00.
2018-09-14 05:51:08,652-04 INFO
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
(EE-ManagedThreadFactory-engine-Thread-1) [5c91fcbd] Lock freed to object
'EngineLock:{exclusiveLocks='[e475e93a-63b3-4573-b242-162c2ed864f0=VDS]',
sharedLocks=''}'
2018-09-14 05:51:37,996-04 INFO
[org.ovirt.engine.core.bll.quota.QuotaManager]
(EE-ManagedThreadFactory-engineScheduled-Thread-44) [] Quota Cache updated.
(19 msec)
(END)
Thanks,
Dafna
6 years
[VDSM] running tests locally
by Vojtech Juranek
Hi,
beginner question: I'm trying to run some VDSM tests locally (e.g.
blocksd_test.py), using
PYTHON_EXE=python3 ./run_tests_local.sh storage/blocksd_test.py
but I'm getting quite a lot of test failures. Most of the tests fail because
of mokeypatch fixture is not injected (see error bellow).
What I'm doing wrong and how I can run selected tests locally?
Thanks in advance
Vojta
ERROR: storage.blocksd_test.test_meta_size_max_val
----------------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/nose/case.py", line 197, in runTest
self.test(*self.arg)
TypeError: test_meta_size_max_val() missing 1 required positional argument:
'monkeypatch'
6 years