live snapshot merge missing after vdsm update
by Roel de Rooy
--_000_DBXPR06MB544F4ED5888DED7D2252803C3300DBXPR06MB544eurprd_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi all,
1 of our older clusters in use, consists of 2 nodes contain Fedora 20, with=
the virt-preview repository enabled.
The Engine itself is installed on a dedicated server (CentOS 6) and is stil=
l on version 3.5.1.1-1.el6.
During some maintenance a couple of days ago on the Fedora 20 nodes, also =
the installed vdsm package was updated by the engineer working on the nodes=
.
We went from version 'vdsm-4.16.10-8.gitc937927.fc20' to 'vdsm-4.16.26-0.fc=
20'.
This morning I wanted to remove some old snapshots on running vm's, only to=
find out that the delete button is once again greyed out.
I also created a new snapshot on a running vm to test if it would only happ=
en on snapshots that were already there before the update, but the delete b=
utton would still remain greyed out.
Only turning off the vm allows me to use the delete button.
When looking at the nodes within the cluster, they both still have Live Sna=
pshot Support on Active.
Before the vdsm update, the live merge functionality worked perfectly.
Anybody experienced something similar?
Could It be because the Engine is still running on 3.5.1?
We are also running 2 clusters with F21 nodes that have the same vdsm versi=
on nummer installed and they don't have an issue at all; connected to the s=
ame engine.
Kind Regards,
Roel
--_000_DBXPR06MB544F4ED5888DED7D2252803C3300DBXPR06MB544eurprd_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph
{mso-style-priority:34;
margin-top:0cm;
margin-right:0cm;
margin-bottom:0cm;
margin-left:36.0pt;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
span.E-mailStijl17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 70.85pt 70.85pt;}
div.WordSection1
{page:WordSection1;}
/* List Definitions */
@list l0
{mso-list-id:1558859571;
mso-list-type:hybrid;
mso-list-template-ids:-237859530 673224566 68354051 68354053 68354049 6835=
4051 68354053 68354049 68354051 68354053;}
@list l0:level1
{mso-level-start-at:0;
mso-level-number-format:bullet;
mso-level-text:-;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-font-family:Calibri;
mso-bidi-font-family:"Times New Roman";}
@list l0:level2
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New";}
@list l0:level3
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
@list l0:level4
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Symbol;}
@list l0:level5
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New";}
@list l0:level6
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
@list l0:level7
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Symbol;}
@list l0:level8
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New";}
@list l0:level9
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
ol
{margin-bottom:0cm;}
ul
{margin-bottom:0cm;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"NL" link=3D"#0563C1" vlink=3D"#954F72">
<div class=3D"WordSection1">
<p class=3D"MsoNormal">Hi all,<o:p></o:p></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">1 of our older clusters in use,=
consists of 2 nodes contain Fedora 20, with the virt-preview repository en=
abled.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">The Engine itself is installed =
on a dedicated server (CentOS 6) and is still on version 3.5.1.1-1.el6.<o:p=
></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">During some maintenance a coupl=
e of days ago on the Fedora 20 nodes, also the installed vdsm package=
was updated by the engineer working on the nodes.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">We went from version ‘vds=
m-4.16.10-8.gitc937927.fc20’ to ‘vdsm-4.16.26-0.fc20’.<o:=
p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">This morning I wanted to remove=
some old snapshots on running vm’s, only to find out that the delete=
button is once again greyed out.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">I also created a new snapshot o=
n a running vm to test if it would only happen on snapshots that were alrea=
dy there before the update, but the delete button would still remain greyed=
out.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Only turning off the vm allows =
me to use the delete button.
<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">When looking at the nodes withi=
n the cluster, they both still have Live Snapshot Support on Active.<o:p></=
o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Before the vdsm update, the liv=
e merge functionality worked perfectly.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Anybody experienced something s=
imilar?<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Could It be because the Engine =
is still running on 3.5.1?<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">We are also running 2 clusters =
with F21 nodes that have the same vdsm version nummer installed and they do=
n’t have an issue at all; connected to the same engine.<o:p></o:p></s=
pan></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Kind Regards,<o:p></o:p></span>=
</p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Roel<o:p></o:p></span></p>
</div>
</body>
</html>
--_000_DBXPR06MB544F4ED5888DED7D2252803C3300DBXPR06MB544eurprd_--
9 years, 1 month
oVirt Engine redundant ?
by Nico
--=_b5ae4dd5edb7f3efcaaf1d71e197ef06
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
Hello
I got a question regarding the redundancy of oVirt Engine; where we can
control everything through the GUI; aka the vCenter.
Initially; my setup was on a single server; installed following the doc
AllinOne.
Then after; i figured out that i would need redundancy; so i installed a
second node.
my question is about the vCenter; is it possible to start it on the
second node when the first node is down or in maintenance ? how to
ensure it is replicated ? i see there is a postgres DB on first node;
but not on second node. I'm a bit worried.
So, is it possible to have a dormant/slave ovirt ENGINE (oVirt web GUI )
; and if yes, could you point me to the related documentation as i
didn't find it.
Maybe, it is possible to run it in a VM ? is it a good idea ? and is it
still possible to migrate ?
Thanks a lot;
Regards
Nico
--=_b5ae4dd5edb7f3efcaaf1d71e197ef06
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; charset=
=3DUTF-8" /></head><body style=3D'font-size: 10pt; font-family: Verdana,Gen=
eva,sans-serif'>
<p>Hello</p>
<p>I got a question regarding the redundancy of oVirt Engine; where we can =
control everything through the GUI; aka the vCenter.</p>
<p>Initially; my setup was on a single server; installed following the doc =
AllinOne.</p>
<p>Then after; i figured out that i would need redundancy; so i installed a=
second node.</p>
<p>my question is about the vCenter; is it possible to start it on the seco=
nd node when the first node is down or in maintenance ? how to ensure it is=
replicated ? i see there is a postgres DB on first node; but not on second=
node. I'm a bit worried.</p>
<p>So, is it possible to have a dormant/slave ovirt ENGINE (oVirt web =
GUI ) ; and if yes, could you point me to the related documentation as i di=
dn't find it.</p>
<p>Maybe, it is possible to run it in a VM ? is it a good idea ? and is it =
still possible to migrate ?</p>
<p>Thanks a lot;</p>
<p>Regards</p>
<p>Nico</p>
<p> </p>
<div> </div>
</body></html>
--=_b5ae4dd5edb7f3efcaaf1d71e197ef06--
9 years, 1 month
vm cannot be started
by qinglong.dong＠horebdata.cn
This is a multi-part message in MIME format.
------=_001_NextPart743821046535_=----
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: base64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------=_001_NextPart743821046535_=----
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html><head><meta http-equiv=3D"content-type" content=3D"text/html; charse=
t=3Dus-ascii"><style>body { line-height: 1.5; }body { font-size: 10.5pt; f=
ont-family: ????; color: rgb(0, 0, 0); line-height: 1.5; }</style></head><=
body>=0A<div><span></span><span style=3D"color: rgb(34, 34, 34); font-fami=
ly: 'Helvetica Neue', Arial, sans-serif; font-size: 15px; line-height: 20p=
x;">Hi all,</span></div><div><span style=3D"font-family: "" helvetica=
=3D"" neue',=3D"" arial,=3D"" sans-serif";=3D"" font-size:=3D"" 15px;=3D""=
color:=3D"" rgb(34,=3D"" 34,=3D"" 34);=3D"" background-color:=3D"" rgb(19=
9,=3D"" 237,=3D"" 204);=3D"" font-weight:=3D"" normal;=3D"" font-style:=3D=
"" normal;text-decoration:=3D"" none;'=3D""> </span><spa=
n style=3D"font-size: 10.5pt; line-height: 1.5; background-color: window;"=
> I have installed ovirt-hosted-engine-setup on one machine a=
nd it used iscsi shared storage on another machine. I created and sealed a=
windows xp template and then I created a vm based on the template. When t=
he vm was started at the first time I attached the floppy to it and use sy=
sprep to init it. Then I shutdown the vm, but after I shutdown it I cannot=
start it. Here are the logs:</span></div><div> <span st=
yle=3D"font-size: 10.5pt; line-height: 1.5; background-color: window;">&nb=
sp; </span><span style=3D"font-size: 10.5pt; line-height: 1.5;=
background-color: window;">VM test is down with =
error. Exit message: internal error Process =
exited while reading console log output: cha=
r device redirected to /dev/pts/1</span></div>2015-09-=
25T01:29:31.222028Z qemu-kvm: -drive file=3D/var/run/vdsm/p=
ayload/6be72664-a80c-4d78-9a5b-f2bbe37c5b2e.4ebf24c33f6111e0dae20466f370de=
53.img,if=3Dnone,id=3Ddrive-fdc0-0-0,format=3Draw,serial=3D: could&nb=
sp;not open disk image /var/run/vdsm/payload/6be72664-=
a80c-4d78-9a5b-f2bbe37c5b2e.4ebf24c33f6111e0dae20466f370de53.img: Per=
mission denied.<div> Anyone can help? Than=
ks!<br><hr style=3D"width: 210px; height: 1px;" color=3D"#b5c4df" size=3D"=
1" align=3D"left">=0A<div>Dolny</div>=0A</div></body></html>
------=_001_NextPart743821046535_=------
9 years, 1 month
Migrate VM to new cluster
by Kevin COUSIN
Hi list,
Hi upgrade my nodes from CentOS 6 to CentOS 7. I create a new cluster, but how can I migrate all my VM to the new cluster ?
Thanks a lot
------------------------
Kevin
9 years, 1 month
Best practice
by Fernando Fuentes
Is there a best practice when upgrading from ovirt 3.4 to 3.5?
I upgraded my development server which is a self hosted server and I
just did a regular update without putting anything under maintenance...
Though my vm's where turned off. The migration from krb/ldap to AAA went
smoothly and so far is running like a champ.
I am about to do the same to our production cluster and was wondering if
I must put all Hosts under maintenance before I do the upgrade?
Thanks in advance for all/any tips from the mailing list!
Regards,
--
Fernando Fuentes
Supervisor & Senior Systems Administrator
Email: ffuentes(a)aasteel.com
American Alloy Steel, Inc.
Houston, Texas
Website: http://www.aasteel.com
Phone: 713-744-4222
Fax: 713-300-5688
9 years, 1 month
upgrade path from Ovirt 3.5x to 3.6x
by Andrea Ghelardi
Hallo,
I needed a quick confirmation on this subject.
Our environment is Ovirt 3.511 (yes, I’ll upgrade soon, I know) running on
a Centos 6.6 hosted engine VM on a cluster of Centos 6.6 physical servers.
Since Ovirt 3.6x will be compatible with Centos 7 hypervisor only, how I’m
supposed to upgrade hosted engine, VM and HOSTs?
i.e. readme tells us the well known procedure (put hosted eng in
maintenance, upgrade, etc) but I will eventually end in a scenario where my
hosted engine 3.6 will run on centos 7 VM running (on) a lot of centos 6.6
servers...
Please tell me I have not to create a totally different datacenter and
export -> import all VMs...
Thank you!
Andrea Ghelardi
9 years, 1 month
ovirt repos dependencies
by Nathanaël Blanchet
Hello,
I tried to install a single host with a custom repo synced by my own
from official ovirt, gluster repos etc... (with katello). But
installation always fail because otopi can't locate gluster packages,
while those packages are available and can be yum installed on the host.
So, what does otopi require more than gluster repo for a successfull
installation?
This limitation prevents from anyone to install a host from an other
repo than official ones (in my case, using a katello subscription)
--
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
9 years, 1 month
ovirt repository in the foreman host provisionning process
by Nathanaël Blanchet
Hello,
In the foreman host provisionning process, should the "yum localinstall
http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm" be
automatically executed in the same way as it is in a traditional way? it
seems that whithout those repos, vdsm installation fails, even if the
host had been previously registered with katello to a local ovirt
repository.
Could you please help me on that point?
--
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
9 years, 1 month
Collectd with Ovirt
by Punit Dambiwal
Hi All,
I want to use collectd (https://collectd.org/) to collect the guest VM
usages in to graphs...as ovirt DWH and reports are not quite good...i want
more good graphs and reporting of the usages...
Please suggest me good way or tool to achieve this...
Thanks,
Punit
9 years, 1 month
