November 2018 - Users - Ovirt List Archives

oVirt Node on CentOS 7.5 and AMD EPYC Support

by Tobias Scheinert

Hi, I am currently building a new virtualization cluster with oVirt, using AMD EPYC processors (AMD EPYC 7351P). At the moment I'm running oVirt Node Version 4.2.3 @ CentOS 7.4.1708. We have the situation that the processor type is recognized as "AMD Opteron G3". With this type of instruction set the VMs are not able to do AES in hardware, this results in poor performance in our case. I found some information that tells me that this problem should be solved with CentOS 7.5 --> <https://access.redhat.com/errata/RHEA-2018:1488> My actual questions: - Are there any further information about the AMD EPYC support? - Any information about an update of the oVirt node to CentOS 7.5? Greeting Tobias

5 years, 11 months

7
10
0 / 0

oVirt 4.2.8 First Release Candidate is now available

by Simone Tiraboschi

The oVirt Project is pleased to announce the availability of the oVirt 4.2.8 First Release Candidate, as of November 29th, 2018. This update is a release candidate of the eighth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.8 release highlights: http://www.ovirt.org/release/4.2.8/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.8/ (or https://github.com/oVirt/ovirt-site/blob/master/source/release/4.2.8/inde... if the former link is still not available) [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/

5 years, 11 months

2
1
0 / 0

About Windows guest agent

by Jingjie Jiang

Hi, I am new in oVirt and I'd like to get the clarification about the packages which support the function of Window guest agent from 4.2 release and how to build it. I looked through the document from ovirt.org, such as https://www.ovirt.org/documentation/internal/guest-agent/guest-agent-for-... It mentioned: /With the release of oVirt 3.5 we have introduced the oVirt WGT (Windows Guest Tools)./ // /The oVirt WGT provides an ISO with all the tools and drivers one needs to install on a Windows VM, with an easy to use installer to install it all in one step./ // /So manual compilation and installation of oVirt Guest Agent is no longer necessary./ // /The oVirt WGT ISO is included in //ovirt-guest-tools-iso-3.5-7.noarch.rpm <http://resources.ovirt.org/pub/ovirt-3.5/rpm/fc20/noarch/ovirt-guest-tool...>//package./ Now, ovirt-guest-tools-iso is up to 4.2.4. I found the src rpm from https://resources.ovirt.org/pub/ovirt-4.2/rpm/el7/SRPMS/ovirt-guest-tools..., but I could not find ovirt-guest-tools-iso from github, only found ovirt-wgt. After clone the ovirt-wgt, I got the SPICE-tools-0.141.iso built. My question is : 1. Is ovirt-wgt used for Windows guest? 2. If so, how can I build ovirt-guest-tools-iso package or ovirt-tools-setup.iso Thanks, Jingjie // //

5 years, 11 months

2
2
0 / 0

problems with aaa auth

by cmcl＠dneg.com

Hi, We've got problems authenticating using ldap accounts on the admin/vm portal. It reports: "Unable to log in. Verify your login information or contact the system administrator." We're running RHEV version 4.2.4.5-0.1.el7_3. I've tested ovirt-engine-extensions-tool using 'aaa login-user' with my profile name and a username and it auths fine. I can't find any log that might give a hint as to why it is failing. The ui.log is empty. It is also extremely slow (it spends a lot of time "waiting for cache..." just to load the administration portal, as well as to log in. Thanks for any help, Cam

5 years, 11 months

1
0
0 / 0

AMD Threadripper support

by Darin Schmidt

My Issue is that there isnt an option to select anything other than Opteron based AMD chips. Is there a way to add my CPU to the list? I have an AMD 2970wx Threadripper. I found an article stating that you can edit the postre database. But where do I find the info needed to add a CPU to the list? Also when I tried to follow the instructions, I get: -bash-4.2$ /opt/rh/rh-postgresql95/root/bin/psql -h localhost -p 5432 -U engine -W /opt/rh/rh-postgresql95/root/bin/psql: error while loading shared libraries: libpq.so.rh-postgresql95-5: cannot open shared object file: No such file or directory

5 years, 11 months

1
3
0 / 0

renewing 3rd-party certificate

by p.staniforth＠leedsbeckett.ac.uk

Hello, our system was using a certificate from a third-party CA that needed to be renewed. I created a CSR from the certificate and key, I replaced the certificate with the new one ( I also had to replace the CA certificate-chain). restarted the apache server but could no longer authenticate to our AD. I ran engine-setup, restarted the engine and also reinstalled the ROOTCA of our AD in the keystore. I got the system running but is there a documented procedure for updating 3rd-party certificates when authenticating to AD. Thanks, Paul S.

5 years, 11 months

1
0
0 / 0

Change Default Behaviour

by Alex McWhirter

In the admin interface, if i create a server template and make a VM out of it i get a Clone/Independent VM. If i use a dekstop template a get a Thin/Dependent In the VM portal i only get Thin/Dependent. How can i change this so that it's always Clone/Dependent for certain templates?

5 years, 11 months

3
4
0 / 0

[ANN] oVirt 4.3.0 First Alpha Release is now available for testing

by Sandro Bonazzola

The oVirt Project is pleased to announce the availability of the First Alpha Release of oVirt 4.3.0, as of November 26th, 2018 This is pre-release software. This pre-release should not to be used in production. Please take a look at our community page[1] to learn how to ask questions and interact with developers and users. All issues or bugs should be reported via oVirt Bugzilla[2]. This update is the first alpha release of the 4.3.0 version. This release brings more than 80 enhancements and more than 280 bug fixes on top of oVirt 4.2 series. What's new in oVirt 4.3.0? * Q35: Support booting virtual machines via UEFI * Skylake-server and AMD EPYC support * New smbus driver in windows guest tools * Improved support for v2v * Tech preview for oVirt on Fedora 28 * Hundreds of bug fixes on top of oVirt 4.2 series * New VM portal (see a preview here: https://imgur.com/a/ExINpci) * New Cluster upgrade UI This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.5 or later (7.6 recommended, enable CR repo for getting it since it's not yet officially released) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.5 or later (7.6 recommended, enable CR repo for getting it since it's not yet officially released) * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for both CentOS 7 and Fedora 28 (tech preview). - oVirt Node NG is already available for both CentOS 7 and Fedora 28 (tech preview). Additional Resources: * Read more about the oVirt 4.3.0 release highlights: http://www.ovirt.org/release/4.3.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.3.0/ [4] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

5 years, 11 months

3
3
0 / 0

Import gluster system/volume into ovirt

by stevenpfeifer3＠gmail.com

Hi guys, I am very new here but have tested the Ovirt in a lab environment and love it I need advice. We have a a three node gluster system totalling 350tb worth of data. It has a volume setup and has data on it. My question is, it possible to import this into an Ovirt system as is and keep the data , or do i have to move the data and reassemble the gluster through ovirt. Any advice is welcomed

5 years, 11 months

2
1
0 / 0

RAID L1/L5/L10 + NFS Loopback Benchmarks

by Andrei Verovski

Hi ! I run a series of benchmarks with IOZONE testing performance of different RAID configurations on HP ProLiant DL380 + impact of NFS loopback. NFS loopback is necessary even for very small systems (e.g. just 2 nodes), since oVirt local storage setup is limited to single (only one) node per data center and this is quite useless from the point of view of functionality. Full article: http://www.vacuum-tube.eu/wp/?p=537 Short YouTube slide show: https://www.youtube.com/watch?v=Xw_VN9G8jSI Related video: Moving away from local storage setup to NFS/GlusterFS https://www.youtube.com/watch?v=2ebhZ5U6x_Y

5 years, 12 months

3
4
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users November 2018