4.2.3 upgrade with a few errors
by ovirt＠fateknollogee.com
I have attached the logs in case you can find anything
The upgrade to all 3 nodes generated a few errors.
1) Had to put node in & out of maintenance a few times before I could
get the node to activate.
2) Node 1 upgrade failed.
After activating the node, it became unresponsive.
I had to login via ipmi to reboot the node.
3) /data-bricks:
had 1 unsynced error & one 5 min self-heal
Had to put node in & out of maintenance a few times before I could get
the node to activate.
Thx
Femi
6 years, 6 months
problem to delete snapshot
by Marcelo Leandro
Hello,
I had problem when try delete an snapshot.
in the gui show this erro:
Error while executing action:
vm-name:
- General command validation failure.
when I acess the snapshot tab this vm, the snapshot not show ID disk, not
cotain disks in this snapshot.
follow the engine and spm logs.
6 years, 6 months
ovirt 4.1 gluster 3.8 repo no longer exist.
by Edward Clay
While checking for some patches on one of my ovirt systems I found that
the ovirt-4.1-dependencies.repo no longer has a 3.8 version available.
I see newer versions but not sure if I just need to change the following
to point to it or upgrade to 4.2.
baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.8/
to
baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.10/
or
baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.12/
Does anyone have the correct procedure I should follow?
Edward Clay
Systems Administrator
The Hut Group<http://www.thehutgroup.com/>
Tel:
Email: edward.clay(a)uk2group.com<mailto:edward.clay@uk2group.com>
For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries.
Confidentiality Notice
This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company.
Encryptions and Viruses
Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail.
Monitoring
Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes.
hgvyjuv
6 years, 6 months
Re: hosted-engine ovirt-engine server not run
by dhy336＠sina.com
hi, I try to run my engine, if engine is good run, it has more log info in engine.log than bad run.my bad run engine log miss some info, I should how to dubug this issue?
2018-05-21 17:35:43,446+08 INFO [org.ovirt.engine.core.bll.hostdev.RefreshHostDevicesCommand] (EE-ManagedThreadFactory-engine-Thread-1) [6ced2adb] Running command: RefreshHostDevicesCommand internal: true. Entities affected : ID: 34fa518e-e453-4de2-bd18-4942885c8aa5 Type: VDSAction group MANIPULATE_HOST with role type ADMIN2018-05-21 17:35:43,447+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.hostdev.HostDeviceManager@20ad9625 2018-05-21 17:35:43,449+08 INFO [org.ovirt.engine.core.bll.dwh.DwhHeartBeat] (ServerService Thread Pool -- 64) [6ced2adb] Initializing DWH Heart Beat2018-05-21 17:35:43,464+08 INFO [org.ovirt.engine.core.bll.dwh.DwhHeartBeat] (ServerService Thread Pool -- 64) [6ced2adb] DWH Heart Beat initialized2018-05-21 17:35:43,465+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.dwh.DwhHeartBeat@75f99d39 2018-05-21 17:35:43,539+08 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ServerService Thread Pool -- 64) [6ced2adb] EVENT_ID: AFFINITY_RULES_ENFORCEMENT_MANAGER_START(10,780), Affinity Rules Enforcement Manager started.2018-05-21 17:35:43,542+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.scheduling.AffinityRulesEnforcementManager@703aa6cd 2018-05-21 17:35:43,547+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.CertificationValidityChecker@47df0bd8 2018-05-21 17:35:43,554+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.hostdeploy.HostUpdatesCheckerService@4dc8896 2018-05-21 17:35:43,556+08 INFO [org.ovirt.engine.core.bll.IPTablesDeprecationNotifier] (ServerService Thread Pool -- 64) [6ced2adb] Start initializing IPTablesDeprecationNotifier2018-05-21 17:35:43,560+08 INFO [org.ovirt.engine.core.bll.IPTablesDeprecationNotifier] (ServerService Thread Pool -- 64) [6ced2adb] Finished initializing IPTablesDeprecationNotifier2018-05-21 17:35:43,560+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.IPTablesDeprecationNotifier@46fc7dd7
----- Original Message -----
From: Simone Tiraboschi <stirabos(a)redhat.com>
To: dhy336(a)sina.com
Cc: users <users(a)ovirt.org>
Subject: Re: [ovirt-users] hosted-engine ovirt-engine server not run
Date: 2018-05-21 21:05
On Mon, May 21, 2018 at 12:21 PM, <dhy336(a)sina.com> wrote:
Hi
I deploy hosted-engine with two nodes, when I power off the node that engine is runing, other node can run VM after about 3 minutes.but ovirt-engine server could not normally run. but systemctrl resetart ovirt-engine. ovirt-engine server can run.
this is VM engine logs.
Nothing seams bad from that logs.Can you please try reproducing it?
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
6 years, 6 months
ovirt with multiple engines
by Michael Watters
Is it possible to have multiple engines with different versions of ovirt
running in the same cluster? I am working on a plan to upgrade our
ovirt cluster to the 4.2 release however we would like to have a
rollback plan in case there are issues with the new engine.
6 years, 6 months
gnome keyring and ssh passphrase?
by Gianluca Cecchi
Hello,
I'm starting here in F28 to use gnome session again, after some Fedora
versions...
I was in Mate up to some days ago and the ssh passphrase was in need to be
inserted only once in mater-terminal, because I had this in my .bashrc (I
think)
export SSH_ASKPASS="/usr/bin/ksshaskpass"
Now I see that my gnome-terminal continues to ask my passhprase without
giving chance to save it into its keyring.
I read this
https://wiki.gnome.org/Projects/GnomeKeyring/Ssh
but I haven't completely understood it (if it is current)
It seems gnome-keyring-daemon is running
[g.cecchi@ope46 ~]$ ps -ef|grep keyr
g.cecchi 1972 1 0 08:44 ? 00:00:13
/usr/bin/gnome-keyring-daemon --daemonize --login
g.cecchi 16480 14954 0 15:11 pts/8 00:00:00 grep --color=auto keyr
[g.cecchi@ope46 ~]$
but is there any other setting to do not to insert every time my passhrase?
Thanks,
Gianluca
6 years, 6 months
hosted-engine ovirt-engine server not run
by dhy336＠sina.com
Hi
I deploy hosted-engine with two nodes, when I power off the node that engine is runing, other node can run VM after about 3 minutes.but ovirt-engine server could not normally run. but systemctrl resetart ovirt-engine. ovirt-engine server can run.
this is VM engine logs.
6 years, 6 months
vGPU VM not starting
by Callum Smith
Dear All,
Our vGPU installation is progressing, though the VM is failing to start.
2018-05-16 22:57:34,328+0100 ERROR (vm/1bc9dae8) [virt.vm] (vmId='1bc9dae8-a0ea-44b3-9103-5805100648d0') The vm start process failed (vm:943)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in _startUnderlyingVm
self._run()
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2872, in _run
dom.createWithFlags(flags)
File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper
ret = f(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper
return func(inst, *args, **kwargs)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in createWithFlags
if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self)
libvirtError: Cannot get interface MTU on '': No such device
That's the specific error, some other information. It seems the GPU 'allocation' of uuid against the nvidia-xx mdev type is proceeding correctly, and the device is being created by the VM instantiation but the VM does not succeed in going up with this error. Any other logs or information relevant to help diagnose?
Regards,
Callum
--
Callum Smith
Research Computing Core
Wellcome Trust Centre for Human Genetics
University of Oxford
e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>
6 years, 6 months
User & Roles
by Simon Coter
Hi,
I'm looking how-to create roles/users and give them access to specific
datacenter/host(s).
I looked on the documentation but I hadn't been able to find the proper
section; anyone that can give me an help ?
Thanks
Simon
6 years, 6 months
Preventing users to see other VMs
by Aziz
Hi list,
I'm trying to remove the default "everyone" user from Ovirt, so that each
user can have access to its own interface to manage a unique VM. I wonder
if this is possible, because so far I'm unable to remove everyone user.
Thank you
6 years, 6 months
