June 2019 - Users - oVirt List Archives

yum versionlock in ovirt node 4.3
by markus.falb＠mafalb.at 28 Jun '19

28 Jun '19

Hi, I just upgraded some ovirt node 4.2.8 to ovirt node 4.3.4 After a ...snip # yum update ovirt-node-ng-image-update snap... I rebooted, and afterwards I wanted to run a yum update like I was doing it with the previous versions, but ...snip # yum update --disableplugin fastestmirror,subscription-manager Loaded plugins: enabled_repos_upload, imgbased-persist, package_upload, product-id, search-disabled-repos, vdsmupgrade, versionlock Repository centos-sclo-rh-release is listed more than once in the configuration Excluding 76 updates due to versionlock (use "yum versionlock status" to show them) No packages marked for update Uploading Enabled Repositories Report Cannot upload enabled repos report, is this client registered? snap... "Excluding 76 updates due to versionlock" ! Many packages are locked via the yum-versionlock plugin, also many system packages like the kernel and python (well, these 2 got my attention because there were security updates published recently). Isn't it recommended anymore to update the these packages to the latest versions? Do you use modified packages (different from CentOS?) Is it safe to remove the versionlock? Best regards, Markus

4 12

Re: disk description
by Strahil 27 Jun '19

27 Jun '19

I don't get the idea. Do you want to resize a vm disk that is encrypted inside the vm ? Best Regards, Strahil NikolovOn Jun 7, 2019 05:19, Dmitry Filonov <filonov(a)hkl.hms.harvard.edu> wrote: > > Hi - > > Looks like Friday is right around the corner... > Have a really stupid question. > Is there a way to edit disk description (or extend it's size) without attaching that disk to some VM and editing disk there? > > Thanks! > > -- > Dmitry Filonov > Linux Administrator > SBGrid Core | Harvard Medical School > 250 Longwood Ave, SGM-114 > Boston, MA 02115

2 1

Re: Cannot inquire Lease
by Strahil 27 Jun '19

27 Jun '19

It looks OK to me , but I'm no expert in that. In such case you will have 5 GB as a reserve, which you can reduce, just to be able to delete some data (in this case VM). The question that comes to my mind is - did you receive any warning by oVirt that gluster is almost full ? Bewt Regards, Strahil NikolovOn Jun 27, 2019 14:36, suporte(a)logicworks.pt wrote: > > After empty the image file, the data center came up and I was able to remove the VM disk on oVirt Web GUI. > What is the best practice to stop gluster to fill all the disk? > When I had a new storage gluster domain in advanced parameters I usually configure it like this: > Warning Low Space Indicator (%): 20 > Critical Space Action Blocker (GB): 5 > Warning Low Confirmed Space Indicator (%): 20 > > is this the best way? > > José > > ________________________________ > From: "Strahil" <hunter86_bg(a)yahoo.com> > To: "suporte" <suporte(a)logicworks.pt>, "users" <users(a)ovirt.org> > Sent: Thursday, June 27, 2019 6:45:16 AM > Subject: Re: [ovirt-users] Re: Cannot inquire Lease > > Hm ... Removing it from the gluster but not inside oVirt can cause a lot of headaches. > Can you find that image in oVirt Storage -> Disks > > Sadly , you got no other option and the optimal approach would be to take the deletion from oVirt UI/API before the storage gets full. > > Ovirt has the option to notify you in advance. > > Best Regards, > Strahil Nikolov > > On Jun 27, 2019 01:25, suporte(a)logicworks.pt wrote: >> >> I just empty a big image here >> /rhev/data-center/mnt/glusterSD/node2.abc.pt:_data/0a19a375-77cb-47e5-af12-7b5451e6fa53/images >> >> > dff87321-a18e-45a1-a4de-fb528403ebeb >> >> and everything looks like it's working again. >> >> ________________________________ >> De: suporte(a)logicworks.pt >> Para: "users" <users(a)ovirt.org> >> Enviadas: Quarta-feira, 26 De Junho de 2019 22:20:13 >> Assunto: [ovirt-users] Cannot inquire Lease >> >> Hi, >> >> The glusterfs domain disk data master is full and the volume is down. >> I have this error: >> VDSM NODE2 command SpmStatusVDS failed: Cannot inquire Lease(name='SDM', path=u'/rhev/data-center/mnt/glusterSD/node2.abc.pt:_data/0a19a375-77cb-47e5-af12-7b5451e6fa53/dom_md/leases', offset=1048576): (2, 'Sanlock get hosts failure', 'No such file or directory') >> >> Cannot delete de domain because is the data master. >> Version 4.3.4.3-1.el7 >> >> What can I do? >> >> >> Thanks >> >> José >> >> -- >> ________________________________ >> Jose Ferradeira >> http://www.logicworks.pt >> >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DHZ3BQ77SK353… > >

2 1

Re: Reinstalling the whole infrastructure
by Markus Schaufler 27 Jun '19

27 Jun '19

Would be really glad for any input in this matter!

1 0

Re: Cannot inquire Lease
by Strahil 27 Jun '19

27 Jun '19

Hm ... Removing it from the gluster but not inside oVirt can cause a lot of headaches. Can you find that image in oVirt Storage -> Disks Sadly , you got no other option and the optimal approach would be to take the deletion from oVirt UI/API before the storage gets full. Ovirt has the option to notify you in advance. Best Regards, Strahil NikolovOn Jun 27, 2019 01:25, suporte(a)logicworks.pt wrote: > > I just empty a big image here > /rhev/data-center/mnt/glusterSD/node2.abc.pt:_data/0a19a375-77cb-47e5-af12-7b5451e6fa53/images > > > dff87321-a18e-45a1-a4de-fb528403ebeb > > and everything looks like it's working again. > > ________________________________ > De: suporte(a)logicworks.pt > Para: "users" <users(a)ovirt.org> > Enviadas: Quarta-feira, 26 De Junho de 2019 22:20:13 > Assunto: [ovirt-users] Cannot inquire Lease > > Hi, > > The glusterfs domain disk data master is full and the volume is down. > I have this error: > VDSM NODE2 command SpmStatusVDS failed: Cannot inquire Lease(name='SDM', path=u'/rhev/data-center/mnt/glusterSD/node2.abc.pt:_data/0a19a375-77cb-47e5-af12-7b5451e6fa53/dom_md/leases', offset=1048576): (2, 'Sanlock get hosts failure', 'No such file or directory') > > Cannot delete de domain because is the data master. > Version 4.3.4.3-1.el7 > > What can I do? > > > Thanks > > José > > -- > ________________________________ > Jose Ferradeira > http://www.logicworks.pt > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DHZ3BQ77SK353…

2 1

RDO integration with oVirt
by Strahil 27 Jun '19

27 Jun '19

Hey guys, I know that RHV has a nice integration with Red Hat's openstack , but I was wondering if RDO - oVirt are having that integration. I've read a nice post : http://www.chrisj.cloud/?q=node/8 and I was wondering if I can do it - as I'm thinking about learning openstack. Bewt Regards, Strahil Nikolov

2 1

VM IPsec network performance
by TranceWorldLogic . 27 Jun '19

27 Jun '19

Hi, I have enable multi-queue feature on nic card and I am getting normal throughput as 26 Gbps. But when I am trying throughput test with IPsec I am getting only max 1.5Gbps. After looking at CPU usages, it is free more than 50%, I am not getting why low throughput in ipsec case. Below are my trial: 2nd, I tried to distribute multi-queue interrupt on mult-cpu but got same result. 3rd, I tried nic passthrough and enable RSS, I got good throughput and CPU usages. Please help me to understand how to increase vnet performance for VM. And also suggest me about ovirt setting. I have also seen some presentation in google around virtio-crypto but as I am using Guest and Host OS as centos 7.3, I can't use virtio-crypto device. Thanks, ~Rohit

1 0

Re: Error virNetTLSContextLoadCertFromFile after upgrade from oVirt 4.2 to 4.3.4
by Strahil 27 Jun '19

27 Jun '19

What about setting the date and time manually somewhere at 2016 on all hosts and blockking ntp at all ? Then the certs will be still valid and can be renewed ? Just asking... Not sure what will be the outcome. Best Regards, Strahil NikolovOn Jun 25, 2019 12:31, Yedidyah Bar David <didi(a)redhat.com> wrote: > > On Tue, Jun 25, 2019 at 12:28 PM Stefano Danzi <s.danzi(a)hawai.it> wrote: > > > > > > > > Il 25/06/2019 10:08, Yedidyah Bar David ha scritto: > > > On Tue, Jun 25, 2019 at 10:26 AM Stefano Danzi <s.danzi(a)hawai.it> wrote: > > >> > > >> > > >> Il 25/06/2019 08:27, Yedidyah Bar David ha scritto: > > >>> On Mon, Jun 24, 2019 at 7:56 PM Stefano Danzi <s.danzi(a)hawai.it> wrote: > > >>>> I've found that this issue is related to: > > >>>> > > >>>> https://bugzilla.redhat.com/show_bug.cgi?id=1648190 > > >>> Are you sure? > > >>> > > >>> That bug is about an old cert, generated by an old version, likely > > >>> before we fixed bug 1210486 (even though it's not mentioned in above > > >>> bug). > > >> Yes! Malformed "Not Before" date/time in certs > > >> > > >>>> But i've no idea how fix it.... > > >>>> > > >>>> Il 24/06/2019 18:19, Stefano Danzi ha scritto: > > >>>>> I've just upgraded my test environment from ovirt 4.2 to 4.3.4. > > >>> Was it installed as 4.2, or upgraded? From which first version? > > >> I don't remember the first installed version. Maybe 4.0... I always > > >> upgraded the original installation. > > >> > > >>>>> System has only one host (Centos 7.6.1810) and run a self hosted engine. > > >>>>> > > >>>>> After upgrade I'm not able to run vdsmd (and so hosted engine....) > > >>>>> > > >>>>> Above the error in log: > > >>>>> > > >>>>> journalctl -xe > > >>>>> > > >>>>> -- L'unità libvirtd.service ha iniziato la fase di avvio. > > >>>>> giu 24 18:09:17 ovirt01.hawai.lan libvirtd[8176]: 2019-06-24 > > >>>>> 16:09:17.006+0000: 8176: info : libvirt version: 4.5.0, package: > > >>>>> 10.el7_6.12 (CentOS BuildSystem <http://bugs.centos.org>, > > >>>>> 2019-06-20-15:01:15, x86-01.bsys. > > >>>>> giu 24 18:09:17 ovirt01.hawai.lan libvirtd[8176]: 2019-06-24 > > >>>>> 16:09:17.006+0000: 8176: info : hostname: ovirt01.hawai.lan > > >>>>> giu 24 18:09:17 ovirt01.hawai.lan libvirtd[8176]: 2019-06-24 > > >>>>> 16:09:17.006+0000: 8176: error : virNetTLSContextLoadCertFromFile:513 > > >>>>> : Unable to import server certificate /etc/pki/vdsm/certs/vdsmcert.pem > > >>> Did you check this file? Does it exist? > > >>> > > >>> ls -l /etc/pki/vdsm/certs/vdsmcert.pem > > >>> > > >>> Can vdsm user read it? > > >>> > > >>> su - vdsm -s /bin/bash -c 'cat /etc/pki/vdsm/certs/vdsmcert.pem > /dev/null' > > >>> > > >>> Please check/share output of: > > >>> > > >>> openssl x509 -in /etc/pki/vdsm/certs/vdsmcert.pem -text > > >>> > > >>> Thanks and best regards, > > >> vdsm can read vdsmcert. The problem is "Not Before" date: > > >> > > >> [root@ovirt01 ~]# su - vdsm -s /bin/bash -c 'openssl x509 -in > > >> /etc/pki/vdsm/certs/vdsmcert.pem -text' > > >> Certificate: > > >> Data: > > >> Version: 3 (0x2) > > >> Serial Number: 4102 (0x1006) > > >> Signature Algorithm: sha1WithRSAEncryption > > >> Issuer: C=US, O=hawai.lan, CN=ovirtbk-sheng.hawai.lan.63272 > > >> Validity > > >> Not Before: Feb 4 08:36:07 2015 > > >> Not After : Feb 4 08:36:07 2020 GMT > > >> [CUT] > > >> > > >> > > >> [root@ovirt01 ~]# su - vdsm -s /bin/bash -c 'openssl x509 -in > > >> /etc/pki/vdsm/certs/cacert.pem -text' > > >> Certificate: > > >> Data: > > >> Version: 3 (0x2) > > >> Serial Number: 4096 (0x1000) > > >> Signature Algorithm: sha1WithRSAEncryption > > >> Issuer: C=US, O=hawai.lan, CN=ovirtbk-sheng.hawai.lan.63272 > > >> Validity > > >> Not Before: Feb 4 00:06:25 2015 > > >> Not After : Feb 2 00:06:25 2025 GMT > > >> > > > OK :-( > > > > > > So it will be rather difficult to fix. > > > > > > You should have been prompted by engine-setup long ago to renew PKI, > > > weren't you? And when you did, didn't you have to reinstall (or Re- > > > Enroll Certificates, in later versions) all hosts? > > > > I don't remember to ever seen a question about this during engine-setup, > > but it could be. > > In /etc/pki/vdsm/certs/ I can see an old cert and ca with subjet: > > > > [root@ovirt01 ~]# su - vdsm -s /bin/bash -c 'openssl x509 -in > > /etc/pki/vdsm/certs/cacert.pem.20150205093608 -text' > > Certificate: > > Data: > > Version: 3 (0x2) > > Serial Number: 1423056193 (0x54d21d41) > > Signature Algorithm: sha256WithRSAEncryption > > Issuer: CN=VDSM Certificate Authority > > Validity > > Not Before: Feb 4 13:23:13 2015 GMT > > Not After : Feb 4 13:23:13 2016 GMT > > Subject: CN=VDSM Certificate Authority > > Subject Public Key Info: > > > > [CUT] > > > > [root@ovirt01 ~]# su - vdsm -s /bin/bash -c 'openssl x509 -in > > /etc/pki/vdsm/certs/vdsmcert.pem.20150205093609 -text' > > Certificate: > > Data: > > Version: 3 (0x2) > > Serial Number: 1423056193 (0x54d21d41) > > Signature Algorithm: sha256WithRSAEncryption > > Issuer: CN=VDSM Certificate Authority > > Validity > > Not Before: Feb 4 13:23:13 2015 GMT > > Not After : Feb 4 13:23:13 2016 GMT > > Subject: CN=ovirt01.hawai.lan, O=VDSM Certificate > > Subject Public Key Info: > > Public Key Algorithm: rsaEncryption > > > > > > I think that was certs made during first hosted engine installation. > > Could it work if I manually create certs like this? > > Just to start libvirtd, vdsm and hosted-engine. > > I think it's worth a try. Just create a self-signed CA, a keypair > signed by it, and place them correctly, should work. > > The engine won't be able to talk with the host, but you can then more > easily reinstall/re-enroll-certs. > > Good luck, > -- > Didi > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LBD33ESAF534F…

2 1

Re: [ANN] oVirt 4.3.5 Third Release Candidate is now available for testing
by Strahil 27 Jun '19

27 Jun '19

Hi Sandro, Thanks for the info. I've just updated my lab (gluster v6.1 -> 6.3 ) and the only issue I have detected so far is that the Advanced Options in UI show no info for the replica bricks, while the arbiter is working. So the situation is the same as before the upgrade. Best Regards, Strahil NikolovOn Jun 26, 2019 17:45, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > > The oVirt Project is pleased to announce the availability of the oVirt 4.3.5 Third Release Candidate for testing, as of June 26th, 2019. > > While testing this release candidate please consider deeper testing on gluster upgrade since with this release we are switching from Gluster 5 to Gluster 6. > > This update is a release candidate of the fifth in a series of stabilization updates to the 4.3 series. > This is pre-release software. This pre-release should not to be used in production. > > This release is available now on x86_64 architecture for: > * Red Hat Enterprise Linux 7.6 or later > * CentOS Linux (or similar) 7.6 or later > > This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: > * Red Hat Enterprise Linux 7.6 or later > * CentOS Linux (or similar) 7.6 or later > * oVirt Node 4.3 (available for x86_64 only) > > See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. > > Notes: > - oVirt Appliance has not been updated due to a regression in the tooling we use for building it.[3] > - oVirt Node is already available[2] > > Additional Resources: > * Read more about the oVirt 4.3.5 release highlights:http://www.ovirt.org/release/4.3.5/ > * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt > * Check out the latest project news on the oVirt blog:http://www.ovirt.org/blog/ > > [1] http://www.ovirt.org/release/4.3.5/ > [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ > [3] https://bugzilla.redhat.com/show_bug.cgi?id=1724076 > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA > > sbonazzo(a)redhat.com

2 1

Cannot inquire Lease
by suporte＠logicworks.pt 27 Jun '19

27 Jun '19

Hi, The glusterfs domain disk data master is full and the volume is down. I have this error: VDSM NODE2 command SpmStatusVDS failed: Cannot inquire Lease(name='SDM', path=u'/rhev/data-center/mnt/glusterSD/node2.abc.pt:_data/0a19a375-77cb-47e5-af12-7b5451e6fa53/dom_md/leases', offset=1048576): (2, 'Sanlock get hosts failure', 'No such file or directory') Cannot delete de domain because is the data master. Version 4.3.4.3-1.el7 What can I do? Thanks José -- Jose Ferradeira http://www.logicworks.pt

1 1

Re: Issues when Creating a Gluster Brick with Cache
by Strahil 26 Jun '19

26 Jun '19

The cache will not take immediately into effect. It is designed to save your cache disk and to load only repetitive data. Try to run your benchmark 20 times and you will notice slight improvement over reading the same object. Of course , you can use lvm cache in writethrough mode, but then it is recommended to use 2 cache disks (raid1 or lvm mirroring) . Best Regards, Strahil NikolovOn Jun 26, 2019 17:44, Robert Crawford <robert.crawford4.14.10(a)gmail.com> wrote: > > So i created the brick without the cache an add the cache doing the commands below; but it appers it's not working because I see no improvement in the benchmarks. > > pvcreate /dev/md/VMStorageHot > vgextend RHGS_vg_VMStorage /dev/md/VMStorageHot > lvcreate -L 1500G -n lv_cache RHGS_vg_VMStorage /dev/md/VMStorageHot > lvcreate -L 100M -n lv_cache_meta RHGS_vg_VMStorage /dev/md/VMStorageHot > lvconvert --type cache-pool --cachemode writeback --poolmetadata RHGS_vg_VMStorage/lv_cache_meta RHGS_vg_VMStorage/lv_cache > lvconvert --type cache --cachepool HGS_vg_VMStorage/lv_cache RHGS_vg_VMStorage/VMStorage_lv_pool > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BQ4ZS245WZDDE…

1 0

vm unresponsive cpu soft lock on heavy operation
by Jayme 26 Jun '19

26 Jun '19

Basic setup notes: 3 node HCI running oVirt 4.3.3 using nodeNG for hosts. Storage is SSD backed with 10Gb network dedicated to gluster with jumbo frames enabled. The ovirt management network (which also acts as VM network) is 1Gb network Hosts are dell R720s w/ 256gb ram and E5-2690 procs I have a VM configured with 16Gb ram and 6 virtual CPUs. When this VM does a heavy operation (in this case it's dumping a large DB from a remote server) the load spikes quickly. When this happens the VM becomes unresponsive and in some cases I get cpu soft lock messages. I'm trying to determine where the bottleneck here is and how I can prevent the VM from becoming unresponsive when doing heavy tasks. Here is info from syslog showing the soft lockup: Jun 26 16:13:10 roble kernel: NMI watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [pg_dump:4025] Jun 26 16:13:10 roble kernel: Modules linked in: binfmt_misc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc ppdev iosf_mbi crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg joydev parport_pc parport virtio_rng i2c_piix4 pcspkr ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic sr_mod cdrom ata_generic virtio_console virtio_net virtio_scsi pata_acpi crct10dif_pclmul crct10dif_common crc32c_intel qxl drm_kms_helper syscopyarea sysfillrect sysimgblt serio_raw fb_sys_fops ttm drm floppy ata_piix libata virtio_pci virtio_ring virtio drm_panel_orientation_quirks dm_mirror dm_region_hash dm_log dm_mod Jun 26 16:13:10 roble kernel: CPU: 5 PID: 4025 Comm: pg_dump Kdump: loaded Not tainted 3.10.0-957.21.2.el7.x86_64 #1 Jun 26 16:13:10 roble kernel: Hardware name: oVirt oVirt Node, BIOS 1.11.0-2.el7 04/01/2014 Jun 26 16:13:10 roble kernel: task: ffffa01443499040 ti: ffffa014b24a4000 task.ti: ffffa014b24a4000 Jun 26 16:13:10 roble kernel: RIP: 0010:[<ffffffffaeb113ea>] [<ffffffffaeb113ea>] generic_exec_single+0xfa/0x1b0 Jun 26 16:13:10 roble kernel: RSP: 0018:ffffa014b24a7c30 EFLAGS: 00000202 Jun 26 16:13:10 roble kernel: RAX: 0000000000000010 RBX: ffffa014b24a7c00 RCX: 0000000000000030 Jun 26 16:13:10 roble kernel: RDX: 000000000000ffff RSI: 0000000000000010 RDI: 0000000000000286 Jun 26 16:13:10 roble kernel: RBP: ffffa014b24a7c78 R08: ffffffffaf213640 R09: 000000018040003f Jun 26 16:13:10 roble kernel: R10: 0000000000000001 R11: fffff83b8e91b540 R12: ffffa014b24a7bc0 Jun 26 16:13:10 roble kernel: R13: 0000000000000c9b R14: ffffa01477bf94e8 R15: ffffa01545074270 Jun 26 16:13:10 roble kernel: FS: 00007f9fefe89840(0000) GS:ffffa0172f340000(0000) knlGS:0000000000000000 Jun 26 16:13:10 roble kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 26 16:13:10 roble kernel: CR2: 00007f9fef391e90 CR3: 000000014aa00000 CR4: 00000000000606e0 Jun 26 16:13:10 roble kernel: Call Trace: Jun 26 16:13:10 roble kernel: [<ffffffffaea7a4e0>] ? leave_mm+0x110/0x110 Jun 26 16:13:10 roble kernel: [<ffffffffaea7a4e0>] ? leave_mm+0x110/0x110 Jun 26 16:13:10 roble kernel: [<ffffffffaea7a4e0>] ? leave_mm+0x110/0x110 Jun 26 16:13:10 roble kernel: [<ffffffffaeb114ff>] smp_call_function_single+0x5f/0xa0 Jun 26 16:13:10 roble kernel: [<ffffffffaed75cd5>] ? cpumask_next_and+0x35/0x50 Jun 26 16:13:10 roble kernel: [<ffffffffaeb11aab>] smp_call_function_many+0x22b/0x270 Jun 26 16:13:10 roble kernel: [<ffffffffaea7a6a8>] native_flush_tlb_others+0xb8/0xc0 Jun 26 16:13:10 roble kernel: [<ffffffffaea7a718>] flush_tlb_mm_range+0x68/0x140 Jun 26 16:13:10 roble kernel: [<ffffffffaebe4687>] tlb_flush_mmu.part.76+0x37/0xe0 Jun 26 16:13:10 roble kernel: [<ffffffffaebe5f85>] tlb_finish_mmu+0x55/0x60 Jun 26 16:13:10 roble kernel: [<ffffffffaebef624>] unmap_region+0xf4/0x140 Jun 26 16:13:10 roble kernel: [<ffffffffaecfc8d3>] ? selinux_file_free_security+0x23/0x30 Jun 26 16:13:10 roble kernel: [<ffffffffaebefbe1>] ? __vma_rb_erase+0x121/0x220 Jun 26 16:13:10 roble kernel: [<ffffffffaebf1c15>] do_munmap+0x2a5/0x480 Jun 26 16:13:10 roble kernel: [<ffffffffaebf1e55>] vm_munmap+0x65/0xb0 Jun 26 16:13:10 roble kernel: [<ffffffffaebf30e2>] SyS_munmap+0x22/0x30 Jun 26 16:13:10 roble kernel: [<ffffffffaf175ddb>] system_call_fastpath+0x22/0x27 Jun 26 16:13:10 roble kernel: [<ffffffffaf175d21>] ? system_call_after_swapgs+0xae/0x146 Jun 26 16:13:10 roble kernel: Code: 00 b7 01 00 48 89 de 48 03 14 c5 60 bc 74 af 48 89 df e8 4a b7 27 00 84 c0 75 46 45 85 ed 74 11 f6 43 20 01 74 0b 0f 1f 00 f3 90 <f6> 43 20 01 75 f8 31 c0 48 8b 7c 24 28 65 48 33 3c 25 28 00 00 Jun 26 16:13:14 roble kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 27s! [kworker/4:3:16530] Jun 26 16:13:14 roble kernel: Modules linked in: binfmt_misc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc ppdev iosf_mbi crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg joydev parport_pc parport virtio_rng i2c_piix4 pcspkr ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic sr_mod cdrom ata_generic virtio_console virtio_net virtio_scsi pata_acpi crct10dif_pclmul crct10dif_common crc32c_intel qxl drm_kms_helper syscopyarea sysfillrect sysimgblt serio_raw fb_sys_fops ttm drm floppy ata_piix libata virtio_pci virtio_ring virtio drm_panel_orientation_quirks dm_mirror dm_region_hash dm_log dm_mod Jun 26 16:13:14 roble kernel: CPU: 4 PID: 16530 Comm: kworker/4:3 Kdump: loaded Tainted: G L ------------ 3.10.0-957.21.2.el7.x86_64 #1 Jun 26 16:13:14 roble kernel: Hardware name: oVirt oVirt Node, BIOS 1.11.0-2.el7 04/01/2014 Jun 26 16:13:14 roble kernel: Workqueue: events tsc_refine_calibration_work Jun 26 16:13:14 roble kernel: task: ffffa016acf74100 ti: ffffa014f76a8000 task.ti: ffffa014f76a8000 Jun 26 16:13:14 roble kernel: RIP: 0010:[<ffffffffaefb97e0>] [<ffffffffaefb97e0>] acpi_pm_read_verified+0x10/0x60 Jun 26 16:13:14 roble kernel: RSP: 0018:ffffa014f76abdb8 EFLAGS: 00000202 Jun 26 16:13:14 roble kernel: RAX: 00000000000addf6 RBX: 0000000000000086 RCX: 0000000000f16644 Jun 26 16:13:14 roble kernel: RDX: 0000000000000608 RSI: 00000000002aac00 RDI: ffffffffaf971901 Jun 26 16:13:14 roble kernel: RBP: ffffa014f76abdb8 R08: 00000000aff71901 R09: 0001427407e2e9e0 Jun 26 16:13:14 roble kernel: R10: 0001427407e2e9e0 R11: 0000000000000000 R12: 0000000000000004 Jun 26 16:13:14 roble kernel: R13: ffffa014f76abd38 R14: ffffffffaf62ea00 R15: ffffa0172f313900 Jun 26 16:13:14 roble kernel: FS: 0000000000000000(0000) GS:ffffa0172f300000(0000) knlGS:0000000000000000 Jun 26 16:13:14 roble kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 26 16:13:14 roble kernel: CR2: 0000000000448d70 CR3: 000000017789a000 CR4: 00000000000606e0 Jun 26 16:13:14 roble kernel: Call Trace: Jun 26 16:13:14 roble kernel: [<ffffffffaea3426d>] tsc_read_refs+0x8d/0xb0 Jun 26 16:13:14 roble kernel: [<ffffffffaea344b2>] tsc_refine_calibration_work+0x1c2/0x220 Jun 26 16:13:14 roble kernel: [<ffffffffaeab9ebf>] process_one_work+0x17f/0x440 Jun 26 16:13:14 roble kernel: [<ffffffffaeabaf56>] worker_thread+0x126/0x3c0 Jun 26 16:13:14 roble kernel: [<ffffffffaeabae30>] ? manage_workers.isra.25+0x2a0/0x2a0 Jun 26 16:13:14 roble kernel: [<ffffffffaeac1da1>] kthread+0xd1/0xe0 Jun 26 16:13:14 roble kernel: [<ffffffffaeac1cd0>] ? insert_kthread_work+0x40/0x40 Jun 26 16:13:14 roble kernel: [<ffffffffaf175c37>] ret_from_fork_nospec_begin+0x21/0x21 Jun 26 16:13:14 roble kernel: [<ffffffffaeac1cd0>] ? insert_kthread_work+0x40/0x40 Jun 26 16:13:14 roble kernel: Code: 43 ea 74 00 30 98 fb ae c7 05 81 ea 74 00 78 00 00 00 5d c3 0f 1f 80 00 00 00 00 66 66 66 66 90 8b 15 5d 74 7a 00 55 48 89 e5 ed <89> c6 81 e6 ff ff ff 00 ed 89 c1 81 e1 ff ff ff 00 ed 25 ff ff

1 0

VDI Brokering
by Ciro Iriarte 26 Jun '19

26 Jun '19

Hi!, What's the usual way to implement VDI with oVirt?, is it usuallly paired with a broker like UDS Enterprise / OpenUDS?, does it have anything embedded that can solve the VM assignment for a group of users?. Regards. CI.-

1 0

Graphics performance and Windows VM
by Ciro Iriarte 26 Jun '19

26 Jun '19

Hello!, I'm wondering what would be a good fit for decent graphics performance on Windows 10/2016/2019 + oVirt/KVM. Is there some kind of offloading with SPICE?, should I use RDP instead?, will vGPU backed by Nvidia cards help somehow?. The idea is to build a VDI environment for Windows VM, probably using OpenThinClient or a custom Linux image at the endpoint. The clients will use office suites, Java IDE, AutoCAD and Sketchup. Comments? Regards, -- CI.- --

2 2

[ANN] oVirt 4.3.5 Third Release Candidate is now available for testing
by Sandro Bonazzola 26 Jun '19

26 Jun '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.5 Third Release Candidate for testing, as of June 26th, 2019. While testing this release candidate please consider deeper testing on gluster upgrade since with this release we are switching from Gluster 5 to Gluster 6. This update is a release candidate of the fifth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance has not been updated due to a regression in the tooling we use for building it.[3] - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.5 release highlights: http://www.ovirt.org/release/4.3.5/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.5/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ [3] https://bugzilla.redhat.com/show_bug.cgi?id=1724076 -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>

1 0

Issues when Creating a Gluster Brick with Cache
by Robert Crawford 26 Jun '19

26 Jun '19

Hey Everyone, When in the server manager and creating a brick from the storage device the brick will fail whenever i attach a cache device to it. I'm not really sure why? It just says unknown.

3 7

HE on single oVirt node
by Mike Davis 26 Jun '19

26 Jun '19

I installed oVirt node for oVirt v4.3.4 on a single server (default partitioning). I know a single node is not best practice, but fits our current need. Now, I am trying to deploy the hosted engine, but getting the error "Device /dev/sdb not found" (full output below). /dev/sdb does not exist. Changing to /dev/sda fails (as I would expect) with "Creating physical volume '/dev/sda' failed". There is only one logical disk on this server (RAID), which is /dev/sda. The process does not seem correct to me. Why would the wizard try to build gluster volumes on bare partitions rather than in a file system like root? What do we need to do to deploy the HE? I used Cockpit and "Hyperconverged : Configure Gluster storage and oVirt hosted engine". Since it is a single node, I selected "Run Gluster Wizard For Single Node". Host1 set to the IP address of the eno1 Ethernet interface (10.0.0.11) No Packages, Update Hosts Volumes left at defaults (engine, data, and vmstore) Bricks left at defaults - (Raid 6 / 256 / 12) - Host 10.0.0.11 - device name /dev/sdb (all LVs) - engine 100GB, data 500GB, vmstore 500GB Output after "Deployment failed": PLAY [Setup backend] *********************************************************** TASK [Gathering Facts] ********************************************************* ok: [10.0.0.11] TASK [gluster.infra/roles/firewall_config : Start firewalld if not already started] *** ok: [10.0.0.11] TASK [gluster.infra/roles/firewall_config : check if required variables are set] *** skipping: [10.0.0.11] TASK [gluster.infra/roles/firewall_config : Open/Close firewalld ports] ******** ok: [10.0.0.11] => (item=2049/tcp) ok: [10.0.0.11] => (item=54321/tcp) ok: [10.0.0.11] => (item=5900/tcp) ok: [10.0.0.11] => (item=5900-6923/tcp) ok: [10.0.0.11] => (item=5666/tcp) ok: [10.0.0.11] => (item=16514/tcp) TASK [gluster.infra/roles/firewall_config : Add/Delete services to firewalld rules] *** ok: [10.0.0.11] => (item=glusterfs) TASK [gluster.infra/roles/backend_setup : Gather facts to determine the OS distribution] *** ok: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Change to Install lvm tools for debian systems.] *** skipping: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Change to Install lvm tools for RHEL systems.] *** ok: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Install python-yaml package for Debian systems] *** skipping: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Initialize vdo_devs array] *********** ok: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Record VDO devices (if any)] ********* skipping: [10.0.0.11] => (item={u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}) TASK [gluster.infra/roles/backend_setup : Enable and start vdo service] ******** skipping: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Create VDO with specified size] ****** skipping: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Check if valid disktype is provided] *** skipping: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Set PV data alignment for JBOD] ****** skipping: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Set PV data alignment for RAID] ****** ok: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Set VG physical extent size for RAID] *** ok: [10.0.0.11] TASK [gluster.infra/roles/backend_setup : Create volume groups] **************** failed: [10.0.0.11] (item={u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}) => {"ansible_loop_var": "item", "changed": false, "item": {"pvname": "/dev/sdb", "vgname": "gluster_vg_sdb"}, "msg": "Device /dev/sdb not found."} NO MORE HOSTS LEFT ************************************************************* NO MORE HOSTS LEFT ************************************************************* PLAY RECAP ********************************************************************* 10.0.0.11 : ok=9 changed=0 unreachable=0 failed=1 skipped=8 rescued=0 ignored=0 ---

3 3

Re: Unable to log into Administration Portal
by Strahil 26 Jun '19

26 Jun '19

Zachary, The version lock is used by oVirt devs to prevent the system to update too far ahead of the oVirt level. Don't remove that next time. You should access the engine only by https://FQDN .IP should not be used. If you have some kind of snapshot (for example gluster) - you can consider reverting. Even consider restore from backup. I'm pretty sure that almost every failiure is recorded somewhere there ... (I am still new to advise location). Bet Regards, Strahil Nikolov On Jun 23, 2019 04:41, zachary.winter(a)witsconsult.com wrote: > > I suppose I just keep striking out on recent oVirt updates. Today (22 June 2019, all previous updates have been installed successfully) I saw that an update was available for my Enterprise Linux Host (main oVirt engine, CentOS 7 x64), and I attempted to update it. The update failed, which had never happened before. I logged in via SSH and saw that the updates had been halted due to "yum versionlock." I cleared versionlock and proceeded with the update, which appeared to work successfully. I rebooted the system, which came up a-ok. However, I can no longer reach the Administration Portal page. The browser only hangs. I see the following: > > - type in the IP address to the server and get the https://<ip address>/ovirt-engine/sso/oauth/authorize page, which tells me: > > "The FQDN used to access the system is not a valid engine FQDN. You must access the system using the engine FQDN or one of the engine alternate FQDNs. > Click here to continue." > > When I click the provided link, I get the same hanging behavior and it never loads the login page. > > - I was able to connect via Cockpit to https://<IP Address>:9090 and log in successfully as root after SSH'ing in and restarting the engine. There are no major issues displayed, and I was able to create a Diagnostic Report. Under Hostname > oVirt Machines, it will actually redirect me to the login page at https://fqdn/ovirt-engine/sso/login.html. The page will actually load after the redirect, but when I enter my admin@internal credentials it just hangs and spins. > > When I return to "Virtual Machines" in Cockpit, I have Host/Cluster/Templates/VDSM options, I see "oVirt login in progress" with a continually spinning circle, never actually able to authenticate. > > > In /var/log/ovirt-engine/ui.log, I see: > > 2019-06-22 19:08:02,533-04 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-4) [] Permutation name: C92E6928986552EDD0E1C99CDC0CC8AB > 2019-06-22 19:08:02,533-04 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-4) [] Uncaught exception: com.google.gwt.core.client.JavaScriptException: (TypeError) : Cannot read property 'kh' of null > at org.ovirt.engine.ui.uicommonweb.dataprovider.AsyncDataProvider.$lambda$4(AsyncDataProvider.java:387) > at org.ovirt.engine.ui.uicommonweb.dataprovider.AsyncDataProvider$lambda$4$Type.executed(AsyncDataProvider.java:387) > at org.ovirt.engine.ui.frontend.Frontend$2.$onFailure(Frontend.java:329) [frontend.jar:] > at org.ovirt.engine.ui.frontend.Frontend$2.onFailure(Frontend.java:329) [frontend.jar:] > at org.ovirt.engine.ui.frontend.communication.OperationProcessor$2.$onFailure(OperationProcessor.java:184) [frontend.jar:] > at org.ovirt.engine.ui.frontend.communication.OperationProcessor$2.onFailure(OperationProcessor.java:184) [frontend.jar:] > at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider.$handleMultipleQueriesFailure(GWTRPCCommunicationProvider.java:305) [frontend.jar:] > at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider$5$1.onFailure(GWTRPCCommunicationProvider.java:263) [frontend.jar:] > at com.google.gwt.user.client.rpc.impl.RequestCallbackAdapter.onResponseReceived(RequestCallbackAdapter.java:198) [gwt-servlet.jar:] > at com.google.gwt.http.client.Request.$fireOnResponseReceived(Request.java:233) [gwt-servlet.jar:] > at com.google.gwt.http.client.RequestBuilder$1.onReadyStateChange(RequestBuilder.java:409) [gwt-servlet.jar:] > at Unknown.eval(webadmin-0.js) > at com.google.gwt.core.client.impl.Impl.apply(Impl.java:236) [gwt-servlet.jar:] > at com.google.gwt.cor

2 1

Error when upgrading Node
by zachary.winter＠witsconsult.com 26 Jun '19

26 Jun '19

I am receiving the following error when attempting to update a Node manually that will not update through the administration portal: error: %pre(ovirt-node-ng-image-update-4.3.4-1.el7.noarch) scriptlet failed, exit status 1 Error in PREIN scriptlet in rpm package ovirt-node-ng-image-update-4.3.4-1.el7.noarch Software OS Version: RHEL - 7 - 6.1810.2.el7.centos OS Description: oVirt Node 4.3.3.1 Kernel Version: 3.10.0 - 957.10.1.el7.x86_64 KVM Version: 2.12.0 - 18.el7_6.3.1 LIBVIRT Version: libvirt-4.5.0-10.el7_6.6 VDSM Version: vdsm-4.30.13-1.el7 SPICE Version: 0.14.0 - 6.el7_6.1 GlusterFS Version: glusterfs-5.5-1.el7 CEPH Version: librbd1-10.2.5-4.el7 Open vSwitch Version: openvswitch-2.10.1-3.el7 Kernel Features: PTI: 1, IBRS: 0, RETP: 1, SSBD: 3 VNC Encryption: Enabled Any advice?

2 3

Error virNetTLSContextLoadCertFromFile after upgrade from oVirt 4.2 to 4.3.4
by Stefano Danzi 26 Jun '19

26 Jun '19

I've just upgraded my test environment from ovirt 4.2 to 4.3.4. System has only one host (Centos 7.6.1810) and run a self hosted engine. After upgrade I'm not able to run vdsmd (and so hosted engine....) Above the error in log: journalctl -xe -- L'unità libvirtd.service ha iniziato la fase di avvio. giu 24 18:09:17 ovirt01.hawai.lan libvirtd[8176]: 2019-06-24 16:09:17.006+0000: 8176: info : libvirt version: 4.5.0, package: 10.el7_6.12 (CentOS BuildSystem <http://bugs.centos.org>, 2019-06-20-15:01:15, x86-01.bsys. giu 24 18:09:17 ovirt01.hawai.lan libvirtd[8176]: 2019-06-24 16:09:17.006+0000: 8176: info : hostname: ovirt01.hawai.lan giu 24 18:09:17 ovirt01.hawai.lan libvirtd[8176]: 2019-06-24 16:09:17.006+0000: 8176: error : virNetTLSContextLoadCertFromFile:513 : Unable to import server certificate /etc/pki/vdsm/certs/vdsmcert.pem giu 24 18:09:17 ovirt01.hawai.lan systemd[1]: libvirtd.service: main process exited, code=exited, status=6/NOTCONFIGURED giu 24 18:09:17 ovirt01.hawai.lan systemd[1]: Failed to start Virtualization daemon. -- Subject: L'unità libvirtd.service è fallita

2 10

oVirt hyerconverged more than 12 node
by wodel youchi 26 Jun '19

26 Jun '19

Hi, Could someone explain the 12 nodes limitation when installing oVirt Hyperconverged? Our client has 16 nodes, can we use them on a hyperconverged installation? for example creating two clusters, one with 9 nodes and the second with 6 nodes. Regards.

2 2

Can ovirt implement FT functions
by xilazz＠126.com 26 Jun '19

26 Jun '19

Hi, now that ovirt has implemented the HA functionality of Shared storage and virtual machines, that's great. In our daily use and maintenance, we sometimes need some functions of virtual machine FT. At present, VMware can realize FT functions based on VSAN. Once upon a time there was a colo project, using qemu virtualization, https://wiki.qemu.org/Features/COLO, is now no one is updated. I would like to consult ovirt about the project plan of FT.

1 0

SAN re-attachment error
by Kim Kargaard 26 Jun '19

26 Jun '19

Hi, I am running into an issue with my SAN storage on ovirt 4.3 I had an issue with the engine and re-installed and when I try to activate the SAN storage and DC (once linked) again, I get this errors: VDSM node2 command HSMGetTaskStatusVDS failed: Cannot acquire host id: ('fb14e013-15f1-49b6-b129-210517aca0da', SanlockException(22, 'Sanlock lockspace add failure', 'Invalid argument')) Invalid status on Data Center Default. Setting status to Non Responsive. The nodes can still all see the SAN and the LUNs. I have tried restarting sanlock on the nodes, but the error persists. I have a vm with a disk on the SAN that I do not want to lose. Any thoughts? Kind regards Kim

1 0

Re: USB Passtrough device problem
by Strahil 25 Jun '19

25 Jun '19

Hi Juan, Can you try with a linux VM with GUI ? This will prove/outrule a problem in the Windows OS. Best Rregards, Strahil NikolovOn Jun 19, 2019 01:57, Juan Pablo Lorier <jplorier(a)gmail.com> wrote: > > Hi, > > I've tried to use 2 different audio IO interfaces connected to a VM via > USB passthrough and none worked. > > I've tried with win 10 and win server 2016 vms with different errors but > none worked. > > I've connected the devices to a host, then attached the host device to a > VM and in the VM properties I've enabled the USB support in the console > properties. > > The devices are installed and don't show any error in the device manager > within the VM, but they don't work. > > Should I do something else? > > Regards > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DVFDXQGSVCYBS…

2 1

iso files
by suporte＠logicworks.pt 25 Jun '19

25 Jun '19

Hi, is possible to install a VM without an ISO domain? for version 4.3.4.3 ? Thanks -- Jose Ferradeira http://www.logicworks.pt

6 8