November 2022 - Users - oVirt List Archives

ovirt mirrorlist download failed on deploy engine 4.5.3
by Benno Wulf 23 Nov '22

23 Nov '22

Hi guys, I just started to use oVirt with Gluster and had great expectations. I downloaded some days the current oVirt Node from https://resources.ovirt.org/pub/ovirt-4.5/iso/ovirt-node-ng-installer/ Installation was fine and network is fine also. But to deply the engine failed. He couldnt download some packages from https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 this site seems to be down (?) Log is attached. Best regards from Germany and thank you for help, Benno Wulf Deployment failed [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set variable for supported bond modes] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect interface types] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for Team devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get list of Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only team devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Search VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate invalid VLANs list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create list of unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices naming convention pattern] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad naming] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with invalid naming convention are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect unsupported VLAN bonds] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid bond mode base interface] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with bad bond mode are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported VLAN devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter unsupported interface types] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Failed if only unsupported devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exist] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var target_address_v4] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var target_address_v6] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var hostname_res_count_output] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var he_tcp_t_address] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var he_tcp_t_port] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop VNC encryption config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if vdsm's abrt-action-save-package-data config exists] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if abrt is installed] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove vdsm's abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set variable for supported bond modes] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect interface types] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for Team devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get list of Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only team devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Search VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate invalid VLANs list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create list of unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices naming convention pattern] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad naming] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with invalid naming convention are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect unsupported VLAN bonds] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid bond mode base interface] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with bad bond mode are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported VLAN devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter unsupported interface types] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Failed if only unsupported devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exist] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var target_address_v4] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var target_address_v6] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var hostname_res_count_output] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var he_tcp_t_address] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var he_tcp_t_port] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop VNC encryption config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if vdsm's abrt-action-save-package-data config exists] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if abrt is installed] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove vdsm's abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set variable for supported bond modes] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect interface types] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for Team devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get list of Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only team devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Search VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate invalid VLANs list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create list of unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices naming convention pattern] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad naming] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with invalid naming convention are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect unsupported VLAN bonds] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid bond mode base interface] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with bad bond mode are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported VLAN devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter unsupported interface types] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Failed if only unsupported devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exist] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var target_address_v4] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var target_address_v6] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var hostname_res_count_output] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var he_tcp_t_address] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var he_tcp_t_port] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop VNC encryption config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if vdsm's abrt-action-save-package-data config exists] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if abrt is installed] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove vdsm's abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check IPv6] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get IPv4 route] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var ip_route_result] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if route exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get IPv6 route] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Debug var ip_route_result] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if route exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse libvirt default network configuration] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set network_dict from default_net_xml] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create he-network-config.xml from network-config.j2 template] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Update libvirt default network configuration, destroy] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Update libvirt default network configuration, undefine] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Update libvirt default network configuration, define] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Activate default libvirt network] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Activate default libvirt network] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get routing rules, IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get routing rules, IPv6] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Save bridge name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for the bridge to appear on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Accept IPv6 Router Advertisements for virbr0] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Refresh network facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch IPv4 CIDR for virbr0] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch IPv6 CIDR for virbr0] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv4 outbound route rules] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv4 inbound route rules] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 outbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 inbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host unique id] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create directory for local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local vm dir path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install ovirt-engine-appliance rpm] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10, "changed": false, "msg": "Failed to download packages: Status code: 503 for https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 (IP: 8.43.85.224)", "results": []} [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy local storage-pool localvmyr_f7p2l] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine local storage-pool localvmyr_f7p2l] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"}

1 0

4.5.3 api authentication fails
by simon＠justconnect.ie 23 Nov '22

23 Nov '22

Trying to create 'Compute Resource' in Foreman to 4.5.3 engine but getting 401 unauthorised error. "Error during SSO authentication: access_denied: Cannot authenticate user No valid profile found in credentials.." I'm out of my depth as far as SSO is concerned so is it possible to disable SSO and enable basic auth i.e. admin@internal Any help appreciated Regards Simon...

1 1

About oVirt’s future
by Yedidyah Bar David 23 Nov '22

23 Nov '22

Hi all, Red Hat Virtualization (RHV) recently entered maintenance phase[1], and the RHV development team is gradually shifting its efforts over to other projects. We are still around, subscribed to the mailing lists, answering questions and help as needed. There is a strong trend in the industry towards containers and microservices, and Red Hat's part of that is OpenShift. People that want to use OpenShift and still need virtualization, until they transition their workloads to run in containers, would best be served by using OpenShift Virtualization. Following this, if you are an oVirt user, you might want to try OKD Virtualization [2], the Community Distribution of Kubernetes that powers Red Hat OpenShift, and Forklift [3], a migration tool that facilitates the transition of VM workloads from oVirt to OKD Virtualization. We worked hard over the last year or so on making sure the oVirt project will be able to sustain development even without much involvement from us - including moving most of the infrastructure from private systems that were funded by/for oVirt/RHV, elsewhere - code review from Gerrit to GitHub, and CI (Continuous Integration) from jenkins to GitHub/Copr/CentOS CBS. We see lots of activity in the community both trying and using oVirt, and helping each other, which is great! We also see some work done on basing oVirt on Rocky/Alma Linux, which is also great! We’ll be happy to help with this, where our specific expertise is needed. Ultimately, the future of oVirt lies in the hands of the community. If you, as a community member, use and like oVirt, and want to see it thrive, now is the best time to help with this! In particular, we welcome long-time, active members of this list to join the list moderation team. If you want to help with this, please contact me directly, or email ovirt-users at ovirt.org. I am posting this message to both lists - users and devel, separately - deliberately not cross-posting. If you are subscribed to both, and feel like replying, please choose the list that best matches the content of your reply. Thanks! :-) Best regards, [1] https://access.redhat.com/support/policy/updates/rhev [2] https://docs.okd.io/latest/virt/about-virt.html [3] https://www.konveyor.io/tools/forklift/ -- Didi

10 13

Re: TR: Re: [IMPORTANT] Upgrade to postgresql-jdbc-42.2.14-1 breaks oVirt Engine 4.4/4.5
by ernest.beinrohr＠axonpro.sk 22 Nov '22

22 Nov '22

I use RockyLinux for the engine. I had to use and versionlock this: https://vault.centos.org/centos/8/AppStream/aarch64/os/Packages/postgresql-…

2 1

Re: Remove Vms with 200 GB Harddisk but gluster not Release diskspace
by marcel d'heureuse 22 Nov '22

22 Nov '22

Hi Users, I remove the vm and check the Box including disks. Ovirt didn't know the vm and disks anymore. Can I remove manual the uuid named files from remove_me folder and also from the shard folder? Br Marcel Sorry used the wrong Sender address. Br Marcel Am 21. November 2022 23:28:02 MEZ schrieb Colin Coe <colin.coe(a)gmail.com>: >Did you click remove disk when you removed the VMs? Try looking under >Storage - Disks for disks not attached to any VMs > >On Tue, 22 Nov 2022 at 05:51, marcel d'heureuse <marcel(a)deheureu.se> wrote: > >> Hi Users, >> >> I have got a Problem: >> >> Vmstore is full with 97 % (3TB). >> >> I want to cleanup and have delete 2 vms with round 500 GB harddiskspace >> together on a single node. >> >> In gluster .shard/.remove_me are 6 files but after 6 h I got no new free >> diskspace. What I am doing wrong? Can I force the cleanup? I have ovirt >> 4.3.9 running. >> >> Br >> Marcel >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/GUMAI5EST3BT2… >>

1 0

Re: Remove Vms with 200 GB Harddisk but gluster not Release diskspace
by Marcel d'Heureuse 22 Nov '22

22 Nov '22

Hi, I remove the vm and check the Box including disks. Ovirt didn't know the vm and disks anymore. Can I remove manual the uuid named files from remove_me folder and also from the shard folder? Br Marcel 21.11.2022 23:28:32 Colin Coe <colin.coe(a)gmail.com>: > Did you click remove disk when you removed the VMs? Try looking under Storage - Disks for disks not attached to any VMs > > On Tue, 22 Nov 2022 at 05:51, marcel d'heureuse <marcel(a)deheureu.se> wrote: >> Hi Users, >> >> I have got a Problem: >> >> Vmstore is full with 97 % (3TB). >> >> I want to cleanup and have delete 2 vms with round 500 GB harddiskspace together on a single node. >> >> In gluster .shard/.remove_me are 6 files but after 6 h I got no new free diskspace. What I am doing wrong? Can I force the cleanup? I have ovirt 4.3.9 running. >> >> Br >> Marcel >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GUMAI5EST3BT2…

2 1

Remove Vms with 200 GB Harddisk but gluster not Release diskspace
by marcel d'heureuse 21 Nov '22

21 Nov '22

Hi Users, I have got a Problem: Vmstore is full with 97 % (3TB). I want to cleanup and have delete 2 vms with round 500 GB harddiskspace together on a single node. In gluster .shard/.remove_me are 6 files but after 6 h I got no new free diskspace. What I am doing wrong? Can I force the cleanup? I have ovirt 4.3.9 running. Br Marcel

1 0

Problem trying to deploy oVirt 4.5 hosted engine on Ceph iSCSI
by fsayd＠derecho.uncu.edu.ar 21 Nov '22

21 Nov '22

Hello: I am following Sandro's guide to deploy hosted engine using Ceph and iSCSI. I have deployed a 3-node Ceph cluster and set up the iSCSI gateway. I am using Rocky Linux 8.6 as host OS. These are the steps I have taken: Install Rocky Linux on the hosts. Deploy Ceph Quincy cluster using cephadm and containers. Install and configure ceph-iscsi from repos pointed out in Sandro's guide. Provision an iSCSI target and lun in gwcli. Configure dnf and repos for RedHat derivatives (https://www.ovirt.org/download/install_on_rhel.html) Configure ovirt 4.5 repo: dnf install -y centos-release-ovirt45 Reset and configure virt module: dnf module reset virt dnf module enable virt:rhel dnf distro-sync --nobest Install hosted apliance: dnf install ovirt-engine-appliance Install hosted-engine-setup dnf install ovirt-hosted-engine-setup At this point I get an error about hosted-engine-setup conflicting with ansible-core: # dnf install ovirt-hosted-engine-setup Failed to set locale, defaulting to C.UTF-8 Last metadata expiration check: 2:37:30 ago on Thu Nov 17 09:16:13 2022. Error: Problem: package ovirt-hosted-engine-setup-2.6.6-1.el8.noarch requires ansible-core >= 2.12, but none of the providers can be installed - package ovirt-hosted-engine-setup-2.6.6-1.el8.noarch conflicts with ansible-core >= 2.13 provided by ansible-core-2.13.3-1.el8.x86_64 - cannot install the best candidate for the job (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) Can you help me with this error? I am not sure about the order of the steps and the configured repos. Thanks in advance

2 1

TR: Re: [IMPORTANT] Upgrade to postgresql-jdbc-42.2.14-1 breaks oVirt Engine 4.4/4.5
by Nathanaël Blanchet 21 Nov '22

21 Nov '22

________________________________ De : Nathanaël Blanchet <blanchet(a)abes.fr> Envoyé : lundi 21 novembre 2022 16:25 À : Jon Ji <jon.ji(a)vinchin.com> Objet : RE: [ovirt-users] Re: [IMPORTANT] Upgrade to postgresql-jdbc-42.2.14-1 breaks oVirt Engine 4.4/4.5 Hello, you may try: dnf --showduplicates list postgresql-jdbc and see the correspondant available packages . you should install the one from appstream : 42.2.3-3.el8_2 rpm -e --nodeps postgresql-jdbc && dnf install postgresql-jdbc-42.2.3-3.el8_2 This jdbc version is known to work. Good luck. ________________________________ De : Jon Ji <jon.ji(a)vinchin.com> Envoyé : vendredi 18 novembre 2022 10:55 À : users(a)ovirt.org <users(a)ovirt.org> Objet : [ovirt-users] Re: [IMPORTANT] Upgrade to postgresql-jdbc-42.2.14-1 breaks oVirt Engine 4.4/4.5 i can't 'dnf downgrade postgresql-jdbc'. [error] No package postgresql-jdbc available. Error: No packages marked for downgrade. please help me [cid:_Foxmail.1@51927f0f-c391-3038-dcf0-f4b04fd919d4] ________________________________ jon.ji(a)vinchin.com

1 0

HostedEngine deployment failure - Help
by simon＠justconnect.ie 21 Nov '22

21 Nov '22

Hi, Whilst trying to install 4.5.2 or 4.5.3 creation of ovirtmgmt interface fails with no indication of why. Instead the deployment creates vnet0 as the

3 6

Hosts force fencing after engine upgrade 4.3->4.4
by ernest.beinrohr＠axonpro.sk 21 Nov '22

21 Nov '22

Hi, I was in the process of upgrading 4.3 to 4.4. First I upgraded the engine and the hosts are still 4.3. The engine has started fencing my hosts as there has been 1 (one) connection problem to VDSM on the host. I Basically, the engine at some random time connects to vdsm, this crashes (didnt on e4.3) and after a few seconds the engine issues a fencing and all my VMs are taken down .... This happend with multiple hosts at random times. Can this be attributed to the unmatched hosts? Or should I consider an engine restore to 4.3? Engine ovirt-engine-4.4.10.7-1.el8.noarch: 2022-11-21 10:40:05,788+01 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.UploadStreamVDSCommand] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-16) [258de39e] Command 'UploadStreamVDSCommand(HostName = galador, UploadStreamVDSCommandParameters:{hostId='146456e8-02fd-4 ce0-9140-13032d9a52ca'})' execution failed: java.net.SocketException: Connection reset by peer (Write failed) HOST vdsm-4.30.46-1.el7.x86_64: 2022-11-21 10:40:05,785+0100 ERROR (Reactor thread) [vds.dispatcher] uncaptured python exception, closing channel <yajsonrpc.betterAsyncore.Dispatcher connected ('::ffff:10.10.80.100', 37772, 0, 0) at 0x7f73cba72710> (<type 'exceptions.TypeError'>:object of type 'NoneType' has no len() [/usr>

1 0

activate incremental backup on disk with ansible ovirt_disk module
by Nathanaël Blanchet 20 Nov '22

20 Nov '22

Hello, I've struggled for hours with enabling incremental backup on disk level with the ansible ovirt.ovirt.ovirt_disk module: - name: modify incremental backup state ovirt.ovirt.ovirt_disk: auth: "{{ ovirt_auth }}" id: "{{disk_id}}" backup: "incremental" But the disk never gets into an incremental state. What's the matter? PS: I know I can do the same with curl, but this is not what I want. Thank you -- Nathanaël Blanchet Supervision réseau SIRE 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr<mailto:blanchet@abes.fr>

2 2

oVirt v4.5 - Error updating oVirt hosts for ovirt-hosted-engine-setup-2.6.6-1.el8.noarch
by Erkan E 20 Nov '22

20 Nov '22

Hello, Upgrading oVirt hosts fails via the ovirt Compute -> Hosts -> Installation -> Upgrade menu. I get the dependency error message below, when trying to upgrade my oVirt hosts running on Rocky Linux 8.7. Its oVirt repo version is centos-release-ovirt45-8.7-3.el8s.noarch. I have no chance to try it with RHEL or CentOS Stream. "msg" : "Depsolve Error occurred: \n Problem: package ovirt-hosted-engine-setup-2.6.6-1.el8.noarch conflicts with ansible-core >= 2.13 provided by ansible-core-2.13.3-1.el8.x86_64\n - cannot install the best update candidate for package ovirt-hosted-engine-setup-2.6.5-1.el8.noarch\n - cannot install the best update candidate for package ansible-core-2.12.2-4.el8_6.rocky.0.1.x86_64", Thank you. Erkan E

2 2

Re: Virtual Machine Pools
by Arik Hadas 18 Nov '22

18 Nov '22

On Fri, Nov 4, 2022 at 9:19 PM Christopher Law <chris(a)chrislaw.me> wrote: > Hopefully, someone can clarify this a bit for me… > > > > From the redhat instructions… > > > > “In principle, virtual machines in a pool are started when taken by a > user, and shut down when the user is finished. However, virtual machine > pools can also contain pre-started virtual machines. Pre-started virtual > machines are kept in an up state, and remain idle until they are taken by a > user. This allows users to start using such virtual machines immediately, > but these virtual machines will consume system resources even while not in > use due to being idle.” > > > > How do users request “take” virtual machines from the pool? For example > with a windows machine where we want them to remote desktop into it using > RDP? Or does this have to happen through some other portal? Do we have to > give users access to the VM Portal? > It generally refers to the VM portal - users should be able to access it and take virtual machines there and then, when their VM is allocated and started, they can connect to it using RDP. But it can alternatively be done using scripts/tools that do this via the API: https://ovirt.github.io/ovirt-engine-api-model/4.5/#services/vm_pool/method… > > > Cheers, > > > > Chris. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZMSC3D3HPW4VO… >

2 1

Yet another hosted engine deployment fails 4.5.2
by simon＠justconnect.ie 18 Nov '22

18 Nov '22

New install (4.5.2) and back to square one - install fails. Now the ovirtmgmt interface isn't created but vnet0 is - no idea what the cause is as there's nothing in the setup logs. oVirt = 1 step forward 3 steps back - and now with almost no support as the project is heading towards the scrap heap - So frustrating. Deadline for this install is Monday so I guess it's back to 4.4.6 install followed by upgrade path - Arghhhhhhhhhhhhhhhhhhhhhg!

1 0

Re: [IMPORTANT] Upgrade to postgresql-jdbc-42.2.14-1 breaks oVirt Engine 4.4/4.5
by Jon Ji 18 Nov '22

18 Nov '22

i can't 'dnf downgrade postgresql-jdbc'. [error] No package postgresql-jdbc available. Error: No packages marked for downgrade. please help me jon.ji(a)vinchin.com

1 0

multipath active-passive vs active-active
by Enrico Becchetti 17 Nov '22

17 Nov '22

Dear All, I have been using ovirt for many years. I've got six servers , two HPE MSA storage and a fiber channel network with two Brocade 8/20q. oVirt has got two domain storage, one volume for each MSA. Now I have only one MSA online. As you know multipath was configured throught vdsm. This is the output of the multipath command from one of the servers: [root@infm-vm04 etc]# multipath -ll 3600c0ff0003c465b6510f85b01000000 dm-2 HPE ,MSA 2050 SAN size=14T features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=1 status=active | `- 2:0:0:0 sdc 8:32 active ready running |-+- policy='service-time 0' prio=1 status=enabled | `- 1:0:0:0 sdb 8:16 active ready running |-+- policy='service-time 0' prio=1 status=enabled | `- 2:0:1:0 sdd 8:48 active ready running `-+- policy='service-time 0' prio=1 status=enabled `- 1:0:1:0 sde 8:64 active ready running With this setup I think there is an active path and the other is in standby state. So, Id like to know if ovrt support active-active mode and how can I make this settings ? /This is the current multipath.conf// // //defaults {// // polling_interval 5// // no_path_retry 4// // user_friendly_names no// // flush_on_last_del yes// // fast_io_fail_tmo 5// // dev_loss_tmo 30// // max_fds 4096// //}// //blacklist {// // protocol "(scsi:adt|scsi:sbp)"// //}// //devices {// // device {// // all_devs yes// // no_path_retry 4// // }// //}// / Thanks a lot. Bye Enrico -- __________________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mobile: +39 075 9696225 FAX: +39 075 5847296 Microsoft Teams:becchett@infn.it Mail: Enrico.Becchetti<at>pg.infn.it Skype:enrico_becchetti Pagina web personale:https://www.pg.infn.it/home/enrico-becchetti _________________________________________________________________________

1 0

expired host certificate
by Diggy Mc 17 Nov '22

17 Nov '22

I'm running oVirt 4.4. The "libvirtd" service won't start and it appears to be because of an expired certificate. How do I create and install a new certificate on the host. Your help is much appreciated. -- Diggy ---

5 8

vdsm 4.50.3.4 and qemu-kvm update problem
by Kapetanakis Giannis 16 Nov '22

16 Nov '22

It seems that vdsm 4.50.3.4-1.el8 has been pushed to centos-ovirt45 which according to https://github.com/oVirt/vdsm/blob/master/vdsm.spec.in # Zero-copy migrations, https://bugzilla.redhat.com/2089434 Requires: qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4 This is not available in Rocky 8.6, probably not backported from Redhat 8.7? # dnf update Last metadata expiration check: 0:02:15 ago on Tue 08 Nov 2022 13:24:14 EET. Error: Problem 1: cannot install the best update candidate for package vdsm-4.50.2.2-1.el8.x86_64 - nothing provides qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4 needed by vdsm-4.50.3.4-1.el8.x86_64 G

3 6

Best performance for vcpu pinning
by martin.decker＠ora-solutions.net 16 Nov '22

16 Nov '22

Hello List, how can I achieve the best performance with vcpu pinning in KVM? Is it better to have 1:1 mapping between virtual and physical thread like this: <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='3'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='5'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='7'/> Or is it better to allow each vCPU to run on any of the limited number of physical threads? e.g. <vcpupin vcpu='0' cpuset='0,1,2,3,4,5,6,7'/> <vcpupin vcpu='1' cpuset='0,1,2,3,4,5,6,7'/> <vcpupin vcpu='2' cpuset='0,1,2,3,4,5,6,7'/> <vcpupin vcpu='3' cpuset='0,1,2,3,4,5,6,7'/> <vcpupin vcpu='4' cpuset='0,1,2,3,4,5,6,7'/> <vcpupin vcpu='5' cpuset='0,1,2,3,4,5,6,7'/> <vcpupin vcpu='6' cpuset='0,1,2,3,4,5,6,7'/> <vcpupin vcpu='7' cpuset='0,1,2,3,4,5,6,7'/> The hypervisor host has 2 CPUs. Each CPU has 8 cores and each core 2 Threads. In total this are 32 threads. lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 32 On-line CPU(s) list: 0-31 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Gold 6244 CPU @ 3.60GHz Stepping: 7 CPU MHz: 4213.731 CPU max MHz: 4400.0000 CPU min MHz: 1200.0000 BogoMIPS: 7200.00 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 25344K NUMA node0 CPU(s): 0-7,16-23 NUMA node1 CPU(s): 8-15,24-31 I need to run 2 VMs on this host. One is for production and should have 24 vCPUs and the other one is for test and should have 8 vCPUs. Test VM workload should not impact Prod VM performance. Current configuration is: TEST: <vcpu placement='static' current='8'>128</vcpu> <iothreads>1</iothreads> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='3'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='5'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='7'/> </cputune> <cpu mode='host-passthrough' check='none'> <topology sockets='16' cores='4' threads='2'/> <numa> <cell id='0' cpus='0-7' memory='134217728' unit='KiB'/> </numa> </cpu> PROD: <vcpu placement='static' current='24'>192</vcpu> <iothreads>1</iothreads> <cputune> <vcpupin vcpu='0' cpuset='8'/> <vcpupin vcpu='1' cpuset='9'/> <vcpupin vcpu='2' cpuset='10'/> <vcpupin vcpu='3' cpuset='11'/> <vcpupin vcpu='4' cpuset='12'/> <vcpupin vcpu='5' cpuset='13'/> <vcpupin vcpu='6' cpuset='14'/> <vcpupin vcpu='7' cpuset='15'/> <vcpupin vcpu='8' cpuset='16'/> <vcpupin vcpu='9' cpuset='17'/> <vcpupin vcpu='10' cpuset='18'/> <vcpupin vcpu='11' cpuset='19'/> <vcpupin vcpu='12' cpuset='20'/> <vcpupin vcpu='13' cpuset='21'/> <vcpupin vcpu='14' cpuset='22'/> <vcpupin vcpu='15' cpuset='23'/> <vcpupin vcpu='16' cpuset='24'/> <vcpupin vcpu='17' cpuset='25'/> <vcpupin vcpu='18' cpuset='26'/> <vcpupin vcpu='19' cpuset='27'/> <vcpupin vcpu='20' cpuset='28'/> <vcpupin vcpu='21' cpuset='29'/> <vcpupin vcpu='22' cpuset='30'/> <vcpupin vcpu='23' cpuset='31'/> </cputune> <cpu mode='host-passthrough' check='none'> <topology sockets='16' cores='6' threads='2'/> <numa> <cell id='0' cpus='0-23' memory='889192448' unit='KiB'/> </numa> </cpu> Versions are: ovirt-host-4.3.5 libvirt-5.7.0-28.el7.x86_64 Thanks in advance, Martin

4 4

VDSM <host> command DestroyVDS failed: General Exception: ("Found not_in_hw, expected ('???',)",)
by nicolas＠devels.es 16 Nov '22

16 Nov '22

Hi, We're running oVirt version 4.4.8, vdsm version 4.40.100.2 and from a couple days ago some of our hosts are reporting the following error: VDSM <host> command DestroyVDS failed: General Exception: ("Found not_in_hw, expected ('???',)",) Seems that nothing has stopped working, but this is an error that shows up in the event list each minute (x each host) and is annoying. Not all hosts report this error, just a couple of them. As a fact, we had to downgrade the libvirt version on our hosts to version 7.6.0-6 because we found a bug that wouldn't start web VNC consoles with versions > 8.x.x. Not sure if this has something to do with it. Could someone shed some light on what's happening and how to solve it? Logs can be downloaded from: https://drive.google.com/file/d/1ltP-kqNu08TvOgthU9_XSZiVDa0nTGxO/view?usp=… Thanks. Nicolas

1 0

ovirt 4.5.3.2 - remove snapshot and powerdown VM take the VM disk to unconsistent state
by Diego Ercolani 16 Nov '22

16 Nov '22

I think I encountered another bug in the engine: I needed to remove a snapshot, and while I was removing the snapshot guest went down. What happened is that the snapshot remove failed and left "inconsistent". I think there is some issue to address. Here are the relevant log (the engine.log (see 22/11/14 13:17:59)) and the log of node4 that was used by the engine. https://cloud.ssis.sm/index.php/s/CiEqMwwK5mGxBgg

2 2

Is iSCSI supposed to be this slow?
by fs3000＠pm.me 15 Nov '22

15 Nov '22

Hello all. I just installed ovirt node and the hosted engine on a single host. As the setup did not offer a option for local filesystems, I used a iscsi LUN on the same host. So the engine got installed there. That LUN is a on a nvme disk, the kind that reads higher than 3GB/s. Yet, on a vm, i cannot get more than 280MB/s. That's using virtio-scsi or virtio as the interface. Using SATA gives around 350MB/s. I tested with dd, like: Bechmarking writes: dd if=/dev/zero of=/root/test bs=1M count=7000 status=progress Bechmarking reads: dd if=/root/test of=/dev/null bs=1M status=progress Also with hdparm -t /dev/sda Is ISCSI supposed to be this slow? Again, this is on the same machine.

1 0

what happens to vms when a host shutdowns?
by Nathanaël Blanchet 15 Nov '22

15 Nov '22

Hi, We are installing UPS powerchute client on hypervisors. What is the default vms behaviour of running vms when an hypervisor is ordered to shutdown: do the vms live migrate or do they shutdown properly (even the restart on an other host because of HA) ? -- Nathanaël Blanchet Supervision réseau SIRE 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

7 11

Remote logging for httpd
by eshwayri＠gmail.com 14 Nov '22

14 Nov '22

My relatively small lab system was generating ~10GB of httpd logging on a daily basis. Even with logrotate and compression, the activity level was just ludicrous. I don't remember this from earlier versions. I don't see any obvious errors in the log that explain this over-zealous behavior. I didn't want to suppress the logs completely, and the LogLevel is already on warn. I decided in the end to remote log to my central syslog server which stores the logs on an NFS mount from a FreeNAS (ZFS with compression) NAS. The compression will keep the actual disk space down, and since I am not all that worried about losing some logs, I went with sync=off and udp on the transit. Here are the changes I made to /etc/httpd/conf.d/ssl.conf in case someone else finds them useful. 48,49c48,51 < ErrorLog logs/ssl_error_log < TransferLog logs/ssl_access_log --- > #ErrorLog logs/ssl_error_log > ErrorLog "|/usr/bin/logger -t ssl-error -p local1.warn" > #TransferLog logs/ssl_access_log > TransferLog "|/usr/bin/logger -t ssl-access -p local1.warn" 203,206c205,212 < CustomLog logs/ssl_request_log \ < "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" < < CustomLog logs/ovirt-requests-log "%t %h \"Correlation-Id: %{Correlation-Id}o\" \"Duration: %Dus\" \"%r\" %b" "expr=%{QUERY_STRING} !~ /username.*password|password.*username/" --- > #CustomLog logs/ssl_request_log \ > # "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" > LogFormat "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" ssl-request-format > CustomLog "|/usr/bin/logger -t ssl-requests -p local1.warn" ssl-request-format > > LogFormat "%t %h \"Correlation-Id: %{Correlation-Id}o\" \"Duration: %Dus\" \"%r\" %b" ovirt-requests-format > CustomLog "|/usr/bin/logger -t ovirt-requests -p local1.warn" ovirt-requests-format "expr=%{QUERY_STRING} !~ /username.*password|password.*username/" > #CustomLog logs/ovirt-requests-log "%t %h \"Correlation-Id: %{Correlation-Id}o\" \"Duration: %Dus\" \"%r\" %b" "expr=%{QUERY_STRING} !~ /username.*password|password.*username/" then blocked local logging to messages with local1.none in rsyslog.conf.

1 0