March 2022 - Users - Ovirt List Archives

Re: Console - VNC password is 12 characters long, only 8 permitted

by Francesco Lorenzini

Hi Chris (sorry for the previous mispel), I installed oVirt 4.4.8 on top on CentOS 8 (Stream and standard), never used Node ISO. Maybe enabling external repo? In a "test" server try to install the following rpm and then downgrade libvirt: http://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm Regards, Francesco Il 14/03/2022 18:31, Christopher Law ha scritto: > > Thanks Francesco, it looks like a fix has been put into oVirt 4.5 > which is scheduled for general release on the 12^th April. > > I’m using an oVirt Node ISO (4.4.10) install on the host are you doing > the same or did you install oVirt on top of a standard centos install > yourself? > > I did try a dnf downgrade libvirt but it said there were no previous > packages available. Just doing a re-install so will try your provided > commands in a moment. > > Cheers, > > Chris. > > *From:*Francesco Lorenzini <francesco(a)shellrent.com> > *Sent:* 14 March 2022 17:23 > *To:* Christopher Law <chris(a)chrislaw.me>; Milan Zamazal > <mzamazal(a)redhat.com> > *Cc:* francesco--- via Users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: Console - VNC password is 12 > characters long, only 8 permitted > > Hi Crhis, > > I didn't resolve properly, I found that downgrading libvirt was the > fastest workaround. > > Just downgrade libvirt via yum/dnf to to version 7.10. I added the > downgrade in an Ansible task, if you are practical: > > - name: Ensure libvirt-7.10.0 is installed > yum: > name: libvirt-7.10.0 > state: present > update_cache: true > allow_downgrade: true > ignore_errors: true > > or via cli : > > yum install libvirt-7.10.0 > > > Post dowgrade we performed a restart of vdsm (or super-vdsm, or both, > I don't remember). The downgrade is quite safe, we didn't encounter > any problem with existing hosts and new deployed one. > > Francesco > > Il 14/03/2022 15:58, Christopher Law ha scritto: > > Hi - > > Did anyone get a solution to this. I just upgraded our physical ovirt-engine to 4.4.10 and added a freshly installed oVirt Node 4.4.10, and I'm getting this issue. > > Given libvirt8 is part of oVirt Node 4.4.10 base install I was hoping for a fix. Also seen a fix applied here:https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b... but not sure if this has been released? > > What are my options, not quite sure how to downgrade libvirt in oVirt Node. I was planning on trying to install 4.4.9, but not sure if the ansible scripts will update it automatically when adding it to the cluster. > > Francesco - Did you get this resolved? > > Cheers, > > Chris. > > -----Original Message----- > > From: Milan Zamazal<mzamazal(a)redhat.com> <mailto:mzamazal@redhat.com> > > Sent: 14 February 2022 18:04 > > To: Francesco Lorenzini<francesco(a)shellrent.com> <mailto:francesco@shellrent.com> > > Cc: francesco--- via Users<users(a)ovirt.org> <mailto:users@ovirt.org> > > Subject: [ovirt-users] Re: Console - VNC password is 12 characters long, only 8 permitted > > Francesco Lorenzini<francesco(a)shellrent.com> <mailto:francesco@shellrent.com> writes: > > Hi Milan, > > thank you for your answer. > > So there is no other way/workaround? We must wait the fix in the > > engine and then upgrade? Maybe a downgrade of libvirt(?). > > I can't think about any other workaround, without modifying sources, than downgrading libvirt, until the fixed Engine is installed. > > I was looking up some config file in the host under /etc/libvirt and > > found the parameters vnc_password in qemu.conf file. I'm not sure that > > setting a password per host in this config file works, casue it is > > still passed via xml... > > In theory, you could set the default password there and remove passwords from the domain XMLs using Vdsm hooks. You would have to do it on all the hosts or handle migrations accordingly. Downgrading libvirt looks much easier. > > The default VNC password. Only 8 bytes are significant for # VNC > > passwords. This parameter is only used if the per-domain # XML config > > does not already provide a password. > > Francesco > > Il 14/02/2022 12:41, Milan Zamazal ha scritto: > > francesco--- via Users<users(a)ovirt.org> <mailto:users@ovirt.org> writes: > > Hi all, > > I'm using websockify + noVNC for expose the vm console via browser getting the graphicsconsoles ticket via API. Everything works fine for every other host that I have (more than 200), the console works either via oVirt engine and via browser) but just for a single host (CentOS Stream release 8, oVirt 4.4.9) the console works only via engine but when I try the connection via browser I get the following error (vdsm log of the host): > > ERROR FINISH updateDevice error=unsupported configuration: VNC password is 12 characters long, only 8 permitted > > Traceback (most recent call last): > > File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line 124, in method > > ret = func(*args, **kwargs) > > File "/usr/lib/python3.6/site-packages/vdsm/API.py", line 372, in updateDevice > > return self.vm.updateDevice(params) > > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3389, in updateDevice > > return self._updateGraphicsDevice(params) > > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3365, in _updateGraphicsDevice > > params['params'] > > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 5169, in _setTicketForGraphicDev > > self._dom.updateDeviceFlags(xmlutils.tostring(graphics), 0) > > File "/usr/lib/python3.6/site-packages/vdsm/virt/virdomain.py", line 101, in f > > ret = attr(*args, **kwargs) > > File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper > > ret = f(*args, **kwargs) > > File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line 94, in wrapper > > return func(inst, *args, **kwargs) > > File "/usr/lib64/python3.6/site-packages/libvirt.py", line 3244, in updateDeviceFlags > > raise libvirtError('virDomainUpdateDeviceFlags() failed') > > libvirt.libvirtError: unsupported configuration: VNC password is > > 12 characters long, only 8 permitted > > The error is pretty much self explanatory but, I can't manage to > > figure out why only on this server > > Hi, > > this happens with libvirt 8.0. > > and I wonder if I can set the length of the generated vnc password > > somewhere. > > I don't think so, it must be fixed in Engine. See > > https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b7 > > 01105f9e1066b09f > > for more details. > > Regards, > > Milan > > _______________________________________________ > > Users mailing list--users(a)ovirt.org > > To unsubscribe send an emailtousers-leave(a)ovirt.org Privacy > > Statement:https://www.ovirt.org/privacy-policy.html > > oVirt Code of > > Conduct:https://www.ovirt.org/community/about/community-guidelines/ > > List > > Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/messag > > e/XJMULDXFHBYK3GNICAJRASQCSLBIFJV7/ > > _______________________________________________ > > Users mailing list --users(a)ovirt.org > > To unsubscribe send an email tousers-leave(a)ovirt.org Privacy Statement:https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/CE... > > _______________________________________________ > > Users mailing list --users(a)ovirt.org > > To unsubscribe send an email tousers-leave(a)ovirt.org > > Privacy Statement:https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/ES... > > -- > > -- > > > > > > Shellrent - Il primo hosting italiano Security First > > > > > *Francesco Lorenzini* > /System Administrator & DevOps Engineer/ > Shellrent Srl > > Via dell'Edilizia, 19 - 36100 Vicenza > Tel. 0444321155 <tel:+390444321155> > > > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org > Privacy Statement:https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/5D... -- -- Shellrent - Il primo hosting italiano Security First *Francesco Lorenzini* /System Administrator & DevOps Engineer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155>

3 years

2
1
0 / 0

Inquire about the 'ovirt_cinderlib' tables

by ssarang520＠gmail.com

Hi, I want to know about some tables in 'ovirt_cinderlib' DB. Could you please explain the 'consistencygroups', 'services', 'groups' tables? Many thanks.

3 years

2
1
0 / 0

Re: Console - VNC password is 12 characters long, only 8 permitted

by Francesco Lorenzini

Hi Crhis, I didn't resolve properly, I found that downgrading libvirt was the fastest workaround. Just downgrade libvirt via yum/dnf to to version 7.10. I added the downgrade in an Ansible task, if you are practical: - name: Ensure libvirt-7.10.0 is installed yum: name: libvirt-7.10.0 state: present update_cache: true allow_downgrade: true ignore_errors: true or via cli : yum install libvirt-7.10.0 Post dowgrade we performed a restart of vdsm (or super-vdsm, or both, I don't remember). The downgrade is quite safe, we didn't encounter any problem with existing hosts and new deployed one. Francesco Il 14/03/2022 15:58, Christopher Law ha scritto: > Hi - > > Did anyone get a solution to this. I just upgraded our physical ovirt-engine to 4.4.10 and added a freshly installed oVirt Node 4.4.10, and I'm getting this issue. > > Given libvirt8 is part of oVirt Node 4.4.10 base install I was hoping for a fix. Also seen a fix applied here:https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b... but not sure if this has been released? > > What are my options, not quite sure how to downgrade libvirt in oVirt Node. I was planning on trying to install 4.4.9, but not sure if the ansible scripts will update it automatically when adding it to the cluster. > > Francesco - Did you get this resolved? > > Cheers, > > Chris. > > -----Original Message----- > From: Milan Zamazal<mzamazal(a)redhat.com> > Sent: 14 February 2022 18:04 > To: Francesco Lorenzini<francesco(a)shellrent.com> > Cc: francesco--- via Users<users(a)ovirt.org> > Subject: [ovirt-users] Re: Console - VNC password is 12 characters long, only 8 permitted > > Francesco Lorenzini<francesco(a)shellrent.com> writes: > >> Hi Milan, >> >> thank you for your answer. >> >> So there is no other way/workaround? We must wait the fix in the >> engine and then upgrade? Maybe a downgrade of libvirt(?). > I can't think about any other workaround, without modifying sources, than downgrading libvirt, until the fixed Engine is installed. > >> I was looking up some config file in the host under /etc/libvirt and >> found the parameters vnc_password in qemu.conf file. I'm not sure that >> setting a password per host in this config file works, casue it is >> still passed via xml... > In theory, you could set the default password there and remove passwords from the domain XMLs using Vdsm hooks. You would have to do it on all the hosts or handle migrations accordingly. Downgrading libvirt looks much easier. > >>> The default VNC password. Only 8 bytes are significant for # VNC >>> passwords. This parameter is only used if the per-domain # XML config >>> does not already provide a password. >> Francesco >> >> Il 14/02/2022 12:41, Milan Zamazal ha scritto: >>> francesco--- via Users<users(a)ovirt.org> writes: >>> >>>> Hi all, >>>> >>>> I'm using websockify + noVNC for expose the vm console via browser getting the graphicsconsoles ticket via API. Everything works fine for every other host that I have (more than 200), the console works either via oVirt engine and via browser) but just for a single host (CentOS Stream release 8, oVirt 4.4.9) the console works only via engine but when I try the connection via browser I get the following error (vdsm log of the host): >>>> >>>> ERROR FINISH updateDevice error=unsupported configuration: VNC password is 12 characters long, only 8 permitted >>>> Traceback (most recent call last): >>>> File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line 124, in method >>>> ret = func(*args, **kwargs) >>>> File "/usr/lib/python3.6/site-packages/vdsm/API.py", line 372, in updateDevice >>>> return self.vm.updateDevice(params) >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3389, in updateDevice >>>> return self._updateGraphicsDevice(params) >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3365, in _updateGraphicsDevice >>>> params['params'] >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 5169, in _setTicketForGraphicDev >>>> self._dom.updateDeviceFlags(xmlutils.tostring(graphics), 0) >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/virdomain.py", line 101, in f >>>> ret = attr(*args, **kwargs) >>>> File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper >>>> ret = f(*args, **kwargs) >>>> File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line 94, in wrapper >>>> return func(inst, *args, **kwargs) >>>> File "/usr/lib64/python3.6/site-packages/libvirt.py", line 3244, in updateDeviceFlags >>>> raise libvirtError('virDomainUpdateDeviceFlags() failed') >>>> libvirt.libvirtError: unsupported configuration: VNC password is >>>> 12 characters long, only 8 permitted >>>> >>>> >>>> The error is pretty much self explanatory but, I can't manage to >>>> figure out why only on this server >>> Hi, >>> >>> this happens with libvirt 8.0. >>> >>>> and I wonder if I can set the length of the generated vnc password >>>> somewhere. >>> I don't think so, it must be fixed in Engine. See >>> https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b7 >>> 01105f9e1066b09f >>> for more details. >>> >>> Regards, >>> Milan >>> _______________________________________________ >>> Users mailing list --users(a)ovirt.org >>> To unsubscribe send an emailtousers-leave(a)ovirt.org Privacy >>> Statement:https://www.ovirt.org/privacy-policy.html >>> oVirt Code of >>> Conduct:https://www.ovirt.org/community/about/community-guidelines/ >>> List >>> Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/messag >>> e/XJMULDXFHBYK3GNICAJRASQCSLBIFJV7/ > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org Privacy Statement:https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/CE... > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org > Privacy Statement:https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/ES... -- -- Shellrent - Il primo hosting italiano Security First *Francesco Lorenzini* /System Administrator & DevOps Engineer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155>

3 years

2
1
0 / 0

Console - VNC password is 12 characters long, only 8 permitted

by francesco＠shellrent.com

Hi all, I'm using websockify + noVNC for expose the vm console via browser getting the graphicsconsoles ticket via API. Everything works fine for every other host that I have (more than 200), the console works either via oVirt engine and via browser) but just for a single host (CentOS Stream release 8, oVirt 4.4.9) the console works only via engine but when I try the connection via browser I get the following error (vdsm log of the host): ERROR FINISH updateDevice error=unsupported configuration: VNC password is 12 characters long, only 8 permitted Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line 124, in method ret = func(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/API.py", line 372, in updateDevice return self.vm.updateDevice(params) File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3389, in updateDevice return self._updateGraphicsDevice(params) File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3365, in _updateGraphicsDevice params['params'] File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 5169, in _setTicketForGraphicDev self._dom.updateDeviceFlags(xmlutils.tostring(graphics), 0) File "/usr/lib/python3.6/site-packages/vdsm/virt/virdomain.py", line 101, in f ret = attr(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line 94, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python3.6/site-packages/libvirt.py", line 3244, in updateDeviceFlags raise libvirtError('virDomainUpdateDeviceFlags() failed') libvirt.libvirtError: unsupported configuration: VNC password is 12 characters long, only 8 permitted The error is pretty much self explanatory but, I can't manage to figure out why only on this server and I wonder if I can set the length of the generated vnc password somewhere. Thank you for your time, Francesco

3 years

4
4
0 / 0

Link multiple self-hosted engines

by ravi k

Hello, We are planning to install self-hosted engines in our production and DR locations which are separated physically. VMware's vcenter has a feature wherein we can link vcenters so we can access both DCs in the same console. Do we have something like that in oVirt as well? I was searching and found this for oVirt 3.5 https://lists.ovirt.org/archives/list/users@ovirt.org/thread/4LDSUM4NRHUO... The suggestion which mentions about using ManageIq seemed interesting. If anyone is managing multiple oVirt environments please share some ideas from experience. Regards, Ravi

3 years

1
1
0 / 0

about the time of the warning message on the engine web

by Tommy Sway

Why is the alarm information displayed on the ovirt Engine information page inconsistent with the actual time, or even later than the current time? The time of the server where the engine resides and the managed servers have been synchronized to the latest time. Why does a similar problem occur? Thanks.

3 years

1
0
0 / 0

Re: [External] : Importing KVMs and QCOW

by Abe E

Thanks for the reply. Yes I was able to make it work in the end, for some reason Ovirt didnt recognize the QCOW or Raw files as they were, so instead I took the vmdk my vendor provided me and converted it to qcow and ovirt then recognized it correctly.

3 years

1
0
0 / 0

Import ova Thin provisioned disk conversion to pre allocated disks fails

by simon＠justconnect.ie

Hi All, During the ova import process, preallocated disk policy is selected and the VM is imported successfully. Unfortunately the disks remain as Thin Provisioned - is this a known bug and is there a workaround? Kind Regards Simon...

3 years

3
4
0 / 0

Long shot on VM failing to start

by simon＠justconnect.ie

We are moving to an oVirt 4.4.9 environment from a 4.3.4.3 environment and have run into a major issue. The method for migration to the new system is to shutdown a VM on the old system, build a new VM on the new system with the same IP/name etc. This has worked for several VMs so far but the latest new build failed and we had to roll back - i.e. start the old VM. The old VM fails to start with the following message in the VMs libvirt qemu log: libvirtd quit during handshake: Input/output error shutting down, reason=failed Any ideas? Regards Simon...

3 years

3
3
0 / 0

hosted-engine failed to deploy

by giovanni.ferioli＠gmail.com

hello i try to deploy a vm engine this host have already a vm that contains various service named dhcp etc i try to deploy with the cmd: hosted-engine --deploy and i get blocked with error msg INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Unable to restart service abrtd: Failed to restart abrtd.service: Transaction contains conflicting jobs 'stop' and 'restart' for abrt-ccpp.service. Probably contradicting requirement dependencies configured.\nSee system logs and 'systemctl status abrtd.service' for details.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up the host : oVirt Node 4.4.10 can you suggest some troubleshooting check ? thanks and regards

3 years

2
1
0 / 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users March 2022