June 2022 - Users - oVirt List Archives

oVirt Survey Summer 2022
by Sandro Bonazzola 27 Jun '22

27 Jun '22

oVirt Survey Summer 2022 As we continue to develop oVirt 4.5, the oVirt community would value insights on your experience with the oVirt project. Please help us to hit the mark by completing this short survey: https://forms.gle/2LxoDKb7njEQwr4f7 . Survey will close on July 29th 2022. Please note the answers to this survey will be publicly accessible. This survey is under oVirt Privacy Policy available at https://ovirt.org/privacy-policy.html . -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

VMs missing following Import of Storage Domain
by simon＠justconnect.ie 27 Jun '22

27 Jun '22

Hi All, I have 2 oVirt 3 node Clusters in 2 Datacenters - effectively 2 independent environements with stretched VLANs for DR purposes. Each volume is geo replicated to the other datacenter. Each volume is a separate Storage Domain. In a DR event the geo-replicated volumes/Storage Domains are imported in the other Datacenter and the VMs imported once it's attached. The issue I am seeing is that some of the VMs are not listed when I click 'VM Import' from the imported Storage Domain. The disks for those missing VMs however, do exist in 'Disk Import' Tab of the imported Storage Domain. Prior to importing the Storage Domain in Site B, all VM disks were migrated to a single Storage Domain in Site A and geo-replication allowed to sync. Kind Regards Simon...

3 7

VM hangs after migration
by Giorgio Biacchi 26 Jun '22

26 Jun '22

Hi, I have a fresh Ovirt installation (4.4.10.7-1.el8 engine and oVirt Node 4.4.10) on a Dell VRTX chassis. There are 3 blades, two of them are identical hardware (PowerEdge M630) and the third is a little newer (PowerEdge M640). The third has different CPUs, more RAM, and slower NICs. I also have a bunch of data domains some on the shared PERC internal storage and others on an external iSCSI storage, all seems configured correctly and all the hosts are operational. I can migrate a VM back and forth from the first two blades without any problem, I can migrate a VM to the third blade but when I migrate a VM from the third blade to any of the other two the task terminate successfully, the VM is marked as up on the target host but the VM hangs, the console is frozen and the VM stops to respond to ping. I have no clues about why this is happening and I'm looking for suggestions about how to debug and hopefully fix this issue. Thanks in advance -- gb PGP Key: http://pgp.mit.edu/ Primary key fingerprint: C510 0765 943E EBED A4F2 69D3 16CC DC90 B9CB 0F34

3 2

Re: Failed to Start services ovirt-imageio
by Nir Soffer 26 Jun '22

26 Jun '22

On Fri, Jun 24, 2022 at 1:33 AM АБИОЛА А. Э <abiolaemma01(a)gmail.com> wrote: > > Hello Nir, Hi АБИОЛА, you forgot to reply to users(a)ovirt.org. Please always reply to the mailing list so the discussion is public. > I am so grateful for your reply and helpful information. I have successfully deployed the Ovirt engine and it is up and running fine, but now I am having another issue uploading .ISO files to disk. I tried to upload .iso files but the status was "Paused by the system" and was waiting 15 hours for the status to change but still no changes, i tried to delete the .ISO file but i can't remove at all, its status was "Finalizing cleaning up" i waited 20 hours for the status to change but with no success. Kindly guard me through the process to fix this errors, so I can upload .ISO files to the Disk to launch the VM successfully. Please see below picture for the error. When the system pauses an upload, you can cancel the upload from the upload menu: Storage > Disks > Upload > Cancel This will delete the new disk and end the image transfer. To understand why the system paused the transfer, please share more info: - Which oVirt version are you running? - Did you add the engine CA certificate to the browser? You can check if the browser is configured correctly by opening an upload dialog: Storage > Disks > Upload > Start and clicking the "Test Connection" button. If this fails, you need to add the engine CA to the browser. When "Test Connection" is successful, try to upload again. If the upload fails again, please share logs showing the timeframe of this error: - engine log from /var/log/ovirt-engine/engine.log - vdsm log from the host performing the upload (see the events tag in engine UI) from /var/log/vdsm/vdsm.log - ovirt-imageio log from the host performing the upload from /var/log/ovirt-imageio/daemon.log Nir > > I will be glad to read from you soon. > > Appreciated > > > On Tue, Jun 21, 2022 at 3:19 PM Nir Soffer <nsoffer(a)redhat.com> wrote: >> >> On Tue, Jun 21, 2022 at 8:18 AM АБИОЛА А. Э <abiolaemma01(a)gmail.com> wrote: >> > >> > Hello Sir, >> > I am new to Ovirt and I tried to deploy it 3weeks into my oracle linux with no success. >> > I got the following error messages >> > Please how can i fix this error to successfully deploy it. >> > I will be glad to read from you soon. >> > Appreciated >> > AAE. >> >> Which oVirt version is this? >> >> You can try to check: >> >> systemctl status ovirt-imageio >> >> It usually show the latest logs which may help to understand why the >> service could not start. >> >> What do you have in /var/log/ovirt-imageio/daemon.log? >> >> Nir >>

1 0

can not access engine when hosted engine is up
by adam_xu＠adagene.com.cn 26 Jun '22

26 Jun '22

Hi ovirt list, I need help. I ran “dnf update” on my engine and reboot it. Then I lost connection of the engine. When I access one of my host web management https://ovirthost1:9090, I saw engine status is “Hosted Engine is up!”, but another host of the cluster is in down status. How can I bring up my engine since it is “UP” now. �

2 9

ovirt 4.5 default username
by adam_xu＠adagene.com.cn 25 Jun '22

25 Jun '22

Hi all, I just setup a new ovirt 4.5 cluster for testing purpose. It was successful. But I can’t login using my password. Is there any changes between 4.4 and 4.5?

1 1

API how to increase extend resize disk VM
by ovirt.org＠nevim.eu 25 Jun '22

25 Jun '22

Hello, please how to increase extend resize disk of VM? I can working with ansible or REST API. Ansible working is here, but i not found manual for update size: https://docs.ansible.com/ansible/2.3/ovirt_disks_module.html On official ovirt documentation i cant found how to update. I found only old manual in KB page, but not working on lastest: https://www.ovirt.org/develop/release-management/features/storage/online-vi… PUT /api/vms/{VM_ID}/disks/{DISK_ID} HTTP/1.1 Accept: application/xml Content-type: application/xml <disk> <size>{NEW_SIZE_IN_BYTES}</size> </disk> Thanks for advice.

5 13

Re: [External]: Re: Need to transfer a VM from oVirt to vSphere
by Gianluca Cecchi 24 Jun '22

24 Jun '22

On Fri, Jun 24, 2022 at 4:38 PM David M. Hornsby <dmhornsby(a)mueller1875.com> wrote: > I have done this before quite a few times. What I did was: > > > 1. Export the qcow2 or raw file and convert it: qemu-img convert -f > qcow2 -O vmdk > 2. Import the vmdk into vsphere storage and convert it to thin with > vmkfstools > 3. Then create the vm definition. > 4. There will be some minor driver and ethernet type stuff to fix. > > This process has worked everytime. You probably could use a tool like virt > v2v or veeam to accomplish this as well. > > David > > Thanks David, I didn't see your e-mail while I was writing my answer. I confirm I went a similar way (but passing anyway from OVA and then extracting the disk...) Gianluca

1 0

Need to transfer a VM from oVirt to vSphere
by Gianluca Cecchi 24 Jun '22

24 Jun '22

Hello, I need to transfer a VM from oVirt 4.4 to vSphere. I see that the "Export as OVA" in the GUI exports in a format compatible with oVirt but not vSphere. Any hint? Any way to easily convert the oVirt generated OVA to a vSPhere compatible one? Thanks, Gianluca

3 3

HCI Upgrade 4.4 to 4.5 Gluster 10
by simon＠justconnect.ie 24 Jun '22

24 Jun '22

Hi All, When Upgrading ovirt 4.4 to 4.5 when using GlusterFS, should Gluster be upgraded manually before the nodes are upgraded? Simon...

2 7

Unable to ugprade cluster level to 4.7 for the hosted engine (only)
by lists＠pequod.io 24 Jun '22

24 Jun '22

Hello, i upgraded my engine and nodes to 4.5 a few days ago and now planning to upgrade the cluster level compatibility from 4.6 to 4.7. First i tried doing this from the cluster settings, but it fails because hosted-engine settings are locked. So i tried it by hand but again got the locked error, i found i cant change any values on the hosted engine. Changing compatiblity level on all other VMs worked fine and there are on 4.7 now. I read about the timezone issue in 4.4.8, so i checked the timezone of my hosted engine it is filled with "Standard: (GMTZ) Greenwhich Standard Time". To be sure, i just did a "/usr/share/ovirt-engine/dbscripts/engine-psql.sh -c "update vm_static SET time_zone='Etc/GMT' where vm_name='HostedEngine';"" and it changed the timezone, but settings are still locked and i am unable to change the compatibility level. Any idea how to solve this?

4 6

oVirt Node 4.5.1
by Lev Veyde 23 Jun '22

23 Jun '22

On June 23rd 2022 the oVirt project released an update of oVirt Node (4.5.1) delivering several security fixes, bug fixes and enhancements. The update is already available on resources.ovirt.org and should land on oVirt mirrors within 24 hours. With oVirt 4.5.1 oVirt Node based on CentOS Stream 9 is also available as a tech preview. Known issues: - On oVirt Node based on CentOS Stream 9 with UEFI secure boot, vdsm fails to decode DMI data due to Bug 2081648 <https://bugzilla.redhat.com/show_bug.cgi?id=2081648> – python-dmidecode module fails to decode DMI data Updates on el8 based oVirt Node: Security fixes: - Important - Bug 2082616 <https://bugzilla.redhat.com/show_bug.cgi?id=2082616> - CVE-2022-24903 - rsyslog: Heap-based overflow in TCP syslog server - Important - Bug 2072376 <https://bugzilla.redhat.com/show_bug.cgi?id=2072376> - CVE-2018-25032 - zlib: A flaw in zlib-1.2.11 when compressing (not decompressing!) certain inputs. - Important - Bug 2065568 <https://bugzilla.redhat.com/show_bug.cgi?id=2065568> - CVE-2022-27666 - kernel: buffer overflow in IPsec ESP transformation code Other updates: - CentOS Stream 8 latest updates - Full list of changes compared to oVirt Node 4.5.0.3: oVirt Node 4.5.0.3 oVirt Node 4.5.1 NetworkManager 1.39.3-1.el8 1.39.5-1.el8 NetworkManager-config-server 1.39.3-1.el8 1.39.5-1.el8 NetworkManager-libnm 1.39.3-1.el8 1.39.5-1.el8 NetworkManager-ovs 1.39.3-1.el8 1.39.5-1.el8 NetworkManager-team 1.39.3-1.el8 1.39.5-1.el8 NetworkManager-tui 1.39.3-1.el8 1.39.5-1.el8 binutils 2.30-114.el8 2.30-116.el8 centos-release-ovirt45 8.7-1.el8s 8.7-2.el8s cockpit 264.1-1.el8 270-1.el8 cockpit-bridge 264.1-1.el8 270-1.el8 cockpit-storaged 264.1-1.el8 269-1.el8 cockpit-system 264.1-1.el8 270-1.el8 cockpit-ws 264.1-1.el8 270-1.el8 cronie 1.5.2-6.el8 1.5.2-7.el8 cronie-anacron 1.5.2-6.el8 1.5.2-7.el8 cups-libs 2.2.6-45.el8 device-mapper-multipath 0.8.4-23.el8 0.8.4-25.el8 device-mapper-multipath-libs 0.8.4-23.el8 0.8.4-25.el8 dnf 4.7.0-9.el8 4.7.0-10.el8 dnf-data 4.7.0-9.el8 4.7.0-10.el8 dracut 049-201.git20220131.el8 049-202.git20220511.el8 dracut-config-generic 049-201.git20220131.el8 049-202.git20220511.el8 dracut-live 049-201.git20220131.el8 049-202.git20220511.el8 dracut-network 049-201.git20220131.el8 049-202.git20220511.el8 dracut-squash 049-201.git20220131.el8 049-202.git20220511.el8 e2fsprogs 1.45.6-4.el8 1.45.6-5.el8 e2fsprogs-libs 1.45.6-4.el8 1.45.6-5.el8 elfutils-default-yama-scope 0.186-1.el8 0.187-4.el8 elfutils-libelf 0.186-1.el8 0.187-4.el8 elfutils-libs 0.186-1.el8 0.187-4.el8 fence-agents-all 4.2.1-94.el8 4.2.1-97.el8 fence-agents-amt-ws 4.2.1-94.el8 4.2.1-97.el8 fence-agents-apc 4.2.1-94.el8 4.2.1-97.el8 fence-agents-apc-snmp 4.2.1-94.el8 4.2.1-97.el8 fence-agents-bladecenter 4.2.1-94.el8 4.2.1-97.el8 fence-agents-brocade 4.2.1-94.el8 4.2.1-97.el8 fence-agents-cisco-mds 4.2.1-94.el8 4.2.1-97.el8 fence-agents-cisco-ucs 4.2.1-94.el8 4.2.1-97.el8 fence-agents-common 4.2.1-94.el8 4.2.1-97.el8 fence-agents-compute 4.2.1-94.el8 4.2.1-97.el8 fence-agents-drac5 4.2.1-94.el8 4.2.1-97.el8 fence-agents-eaton-snmp 4.2.1-94.el8 4.2.1-97.el8 fence-agents-emerson 4.2.1-94.el8 4.2.1-97.el8 fence-agents-eps 4.2.1-94.el8 4.2.1-97.el8 fence-agents-heuristics-ping 4.2.1-94.el8 4.2.1-97.el8 fence-agents-hpblade 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ibmblade 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ifmib 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ilo-moonshot 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ilo-mp 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ilo-ssh 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ilo2 4.2.1-94.el8 4.2.1-97.el8 fence-agents-intelmodular 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ipdu 4.2.1-94.el8 4.2.1-97.el8 fence-agents-ipmilan 4.2.1-94.el8 4.2.1-97.el8 fence-agents-kdump 4.2.1-94.el8 4.2.1-97.el8 fence-agents-mpath 4.2.1-94.el8 4.2.1-97.el8 fence-agents-redfish 4.2.1-94.el8 4.2.1-97.el8 fence-agents-rhevm 4.2.1-94.el8 4.2.1-97.el8 fence-agents-rsa 4.2.1-94.el8 4.2.1-97.el8 fence-agents-rsb 4.2.1-94.el8 4.2.1-97.el8 fence-agents-sbd 4.2.1-94.el8 4.2.1-97.el8 fence-agents-scsi 4.2.1-94.el8 4.2.1-97.el8 fence-agents-vmware-rest 4.2.1-94.el8 4.2.1-97.el8 fence-agents-vmware-soap 4.2.1-94.el8 4.2.1-97.el8 fence-agents-wti 4.2.1-94.el8 4.2.1-97.el8 glibc 2.28-200.el8 2.28-203.el8 glibc-common 2.28-200.el8 2.28-203.el8 glibc-langpack-en 2.28-200.el8 2.28-203.el8 kernel 4.18.0-383.el8 4.18.0-394.el8 kernel-core 4.18.0-383.el8 4.18.0-394.el8 kernel-modules 4.18.0-383.el8 4.18.0-394.el8 kernel-tools 4.18.0-383.el8 4.18.0-394.el8 kernel-tools-libs 4.18.0-383.el8 4.18.0-394.el8 kexec-tools 2.0.24-1.el8 2.0.24-2.el8 kpartx 0.8.4-23.el8 0.8.4-25.el8 libbasicobjects 0.1.1-39.el8 0.1.1-40.el8 libcap 2.48-2.el8 2.48-4.el8 libcollection 0.7.0-39.el8 0.7.0-40.el8 libcom_err 1.45.6-4.el8 1.45.6-5.el8 libdhash 0.5.0-39.el8 0.5.0-40.el8 libini_config 1.3.1-39.el8 1.3.1-40.el8 libldb 2.4.1-1.el8 2.5.0-1.el8 libpath_utils 0.2.1-39.el8 0.2.1-40.el8 libref_array 0.1.5-39.el8 0.1.5-40.el8 libss 1.45.6-4.el8 1.45.6-5.el8 libtdb 1.4.4-1.el8 1.4.6-1.el8 libtevent 0.11.0-0.el8 0.12.0-0.el8 libwbclient 4.15.5-8.el8 4.16.1-0.el8 mesa-dri-drivers 21.3.4-1.el8 21.3.4-1.0.1.el8 mesa-filesystem 21.3.4-1.el8 21.3.4-1.0.1.el8 mesa-libEGL 21.3.4-1.el8 21.3.4-1.0.1.el8 mesa-libGL 21.3.4-1.el8 21.3.4-1.0.1.el8 mesa-libgbm 21.3.4-1.el8 21.3.4-1.0.1.el8 mesa-libglapi 21.3.4-1.el8 21.3.4-1.0.1.el8 nmap-ncat 7.70-6.el8 7.70-7.el8 openvswitch-selinux-extra-policy 1.0-28.el8 1.0-29.el8s osinfo-db 20211216-1.el8 20220516-1.el8 ovirt-ansible-collection 2.0.3-1.el8 2.1.0-1.el8 ovirt-hosted-engine-setup 2.6.3-1.el8 2.6.4-1.el8 ovirt-imageio-client 2.4.3-1.el8 2.4.5-1.el8 ovirt-imageio-common 2.4.3-1.el8 2.4.5-1.el8 ovirt-imageio-daemon 2.4.3-1.el8 2.4.5-1.el8 ovirt-node-ng-image-update-placeholder 4.5.0.3-1.el8 4.5.1-1.el8 ovirt-release-host-node 4.5.0.3-1.el8 4.5.1-1.el8 pacemaker-cluster-libs 2.1.2-4.el8 2.1.3-1.el8 pacemaker-libs 2.1.2-4.el8 2.1.3-1.el8 pacemaker-schemas 2.1.2-4.el8 2.1.3-1.el8 pam 1.3.1-16.el8 1.3.1-20.el8 python3-dnf 4.7.0-9.el8 4.7.0-10.el8 python3-perf 4.18.0-383.el8 4.18.0-394.el8 python38-ovirt-imageio-client 2.4.3-1.el8 2.4.5-1.el8 python38-ovirt-imageio-common 2.4.3-1.el8 2.4.5-1.el8 rpcbind 1.2.5-8.el8 1.2.5-9.el8 rsyslog 8.2102.0-9.el8 8.2102.0-10.el8 rsyslog-elasticsearch 8.2102.0-9.el8 8.2102.0-10.el8 rsyslog-mmjsonparse 8.2102.0-9.el8 8.2102.0-10.el8 rsyslog-mmnormalize 8.2102.0-9.el8 8.2102.0-10.el8 rsyslog-openssl 8.2102.0-9.el8 8.2102.0-10.el8 samba-client-libs 4.15.5-8.el8 4.16.1-0.el8 samba-common 4.15.5-8.el8 4.16.1-0.el8 samba-common-libs 4.15.5-8.el8 4.16.1-0.el8 scap-security-guide 0.1.60-7.el8 0.1.60-9.el8 selinux-policy 3.14.3-98.el8 3.14.3-99.el8 selinux-policy-targeted 3.14.3-98.el8 3.14.3-99.el8 sos 4.2-15.el8 4.3-1.el8 vdsm 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-api 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-client 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-common 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-gluster 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-http 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-jsonrpc 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-network 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-python 4.50.0.13-1.el8 4.50.1.4-1.el8 vdsm-yajsonrpc 4.50.0.13-1.el8 4.50.1.4-1.el8 yum 4.7.0-9.el8 4.7.0-10.el8 zlib 1.2.11-17.el8 1.2.11-19.el8 Additional resources: - Read more about the oVirt 4.5.1 release highlights: https://www.ovirt.org/release/4.5.1/ - Get more oVirt project updates on Twitter: https://twitter.com/ovirt - Check out the latest project news on the oVirt blog: https://blogs.ovirt.org/ Thanks in advance, -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

import vm disk image on ISCSI Data Domain
by sultanu＠inbox.ru 23 Jun '22

23 Jun '22

Hello, all Maybe somebody have experiance. I have cluster 3 hosts + ISCSI storage as Data Domain. How can i upload vm image from my old ovirt (baremetal with local storage) to my new cluster from CLI, NOT from WEB UI? Dowload on my local computer and post from WEB UI it take long period of time. Thak you for your time.

1 0

Lost space in /var/log
by Andrei Verovski 23 Jun '22

23 Jun '22

Hi ! I have strange situation with low disk space on /var/log/, yet I can't figure out what have consumed so much space. Look at the du output. Thanks in advance for any suggestion(s). # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/centos-var 15G 1.3G 13G 9% /var /dev/mapper/centos-var_log 7.8G 7.1G 293M 97% /var/log /dev/mapper/centos-var_log_audit 2.0G 41M 1.8G 3% /var/log/audit # # du -ah /var/log | sort -n -r | head -n 20 664K /var/log/vdsm 660K /var/log/vdsm/vdsm.log 624K /var/log/gdm 580K /var/log/anaconda/storage.log 480K /var/log/anaconda/packaging.log 380K /var/log/gdm/:0.log.4 316K /var/log/anaconda/syslog 276K /var/log/tuned 252K /var/log/libvirt/qemu/NextCloud-Collabora-LVM.log-20210806 220K /var/log/Xorg.0.log 168K /var/log/gdm/:0.log 156K /var/log/yum.log-20191117 156K /var/log/secure-20180726 132K /var/log/libvirt/qemu/NextCloud-Collabora-Active.log 128K /var/log/anaconda/anaconda.log 120K /var/log/hp-snmp-agents 116K /var/log/hp-snmp-agents/cma.log 112K /var/log/vinchin 104K /var/log/vinchin/kvm_backup_service 104K /var/log/tuned/tuned.log.2 # # find . -printf '%s %p\n'| sort -nr | head -10 16311686 ./rhsm/rhsm.log 4070423 ./cron-20180726 3667146 ./anaconda/journal.log 3409071 ./secure 3066660 ./rhsm/rhsm.log-20180726 2912670 ./audit/audit.log 1418007 ./sanlock.log 1189580 ./vdsm/vdsm.log 592718 ./anaconda/storage.log 487567 ./anaconda/packaging.log

3 4

Re: Lost space in /var/log
by Michael Thomas 22 Jun '22

22 Jun '22

This can also happen with a misconfigured logrotate config. If a process is writing to a large log file, and logrotate comes along and removes it, then the process still has an open filehandle to the large file even though you can't see it. The space won't get removed until the process closes the filehandle (eg rebooting). The following command should give you a list of these ghost files that are still open but have been removed from the directory tree: lsof | grep '(deleted)' Stackexchange has some additional useful tips: https://unix.stackexchange.com/questions/68523/find-and-remove-large-files-… --Mike On 6/22/22 15:49, Matthew.Stier(a)fujitsu.com wrote: > Deleted some files to "clean up" /var/log, but the space was not recovered? > > Space for deleted files are only recovered when all references to that space are removed. This includes the directory reference, and any open file-handles to the file. > > The is a popular trick for a self-deleting scratch file. Create a file, open file-handle to it, and then remove the file. The open file-handle can then be written to, and read from, as long as you like, but when the file-handle is closed, explicitly or implicitly, the space is automatically recovered. > > > -----Original Message----- > From: Andrei Verovski <andreil1(a)starlett.lv> > Sent: Wednesday, June 22, 2022 3:27 PM > To: users(a)ovirt.org > Subject: [ovirt-users] Lost space in /var/log > > Hi ! > > I have strange situation with low disk space on /var/log/, yet I can't figure out what have consumed so much space. > Look at the du output. > > Thanks in advance for any suggestion(s). > > > # df -h > > Filesystem Size Used Avail Use% Mounted on > /dev/mapper/centos-var 15G 1.3G 13G 9% /var > /dev/mapper/centos-var_log 7.8G 7.1G 293M 97% /var/log > /dev/mapper/centos-var_log_audit 2.0G 41M 1.8G 3% /var/log/audit > > # > # du -ah /var/log | sort -n -r | head -n 20 > > 664K /var/log/vdsm > 660K /var/log/vdsm/vdsm.log > 624K /var/log/gdm > 580K /var/log/anaconda/storage.log > 480K /var/log/anaconda/packaging.log > 380K /var/log/gdm/:0.log.4 > 316K /var/log/anaconda/syslog > 276K /var/log/tuned > 252K /var/log/libvirt/qemu/NextCloud-Collabora-LVM.log-20210806 > 220K /var/log/Xorg.0.log > 168K /var/log/gdm/:0.log > 156K /var/log/yum.log-20191117 > 156K /var/log/secure-20180726 > 132K /var/log/libvirt/qemu/NextCloud-Collabora-Active.log > 128K /var/log/anaconda/anaconda.log > 120K /var/log/hp-snmp-agents > 116K /var/log/hp-snmp-agents/cma.log > 112K /var/log/vinchin > 104K /var/log/vinchin/kvm_backup_service > 104K /var/log/tuned/tuned.log.2 > > # > # find . -printf '%s %p\n'| sort -nr | head -10 > > 16311686 ./rhsm/rhsm.log > 4070423 ./cron-20180726 > 3667146 ./anaconda/journal.log > 3409071 ./secure > 3066660 ./rhsm/rhsm.log-20180726 > 2912670 ./audit/audit.log > 1418007 ./sanlock.log > 1189580 ./vdsm/vdsm.log > 592718 ./anaconda/storage.log > 487567 ./anaconda/packaging.log > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/N566CST3DAXIL… > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JCAQU32UZSEWK…

1 0

Q: Error ID 119 - ioctl(KVM_CREATE_VM) failed: Cannot allocate memory
by Andrei Verovski 22 Jun '22

22 Jun '22

Hi ! Does this error message means node runs out of RAM? Quite strange since there are about 20 GB of free RAN, and VM requires only 8. I noticed this happen till Vinchin was in a process of removing snapshot from another VM. Thanks. VM Jumis_VM-Active is down with error. Exit message: internal error: process exited while connecting to monitor: ioctl(KVM_CREATE_VM) failed: 12 Cannot allocate memory 2022-06-22T19:50:46.501704Z qemu-kvm: failed to initialize KVM: Cannot allocate memory.

1 0

Move Master Storage Domain
by john＠penrod.net 22 Jun '22

22 Jun '22

Running oVirt 4.3.10. Three storage domains. #1 is the current master. No disks/data remain on it. All virtual machines have been moved. I plan to put it in maintenance mode and let it force an election. I don't care which of the remaining two become master. Will this impact virtual machines that are currently running? If possible, I need to keep them running. Thoughts?

1 0

Cannot export VM to another data domain. "o.original_template is undefined"
by Gilboa Davara 22 Jun '22

22 Jun '22

Hello, 4.4.10 Gluster based cluster w/ 3 nodes. I'm backing up all VMs before upgrading the setup to 4.5. (Hopefully done right before 4.5.1 w/ Gluster fix is released). When trying to export a VM to another data domain, several VMs show the following error: "Export VM Failed. o.original_template is undefined". Engine log looks clean (I see nothing about the failed upgrade). Any idea what's broken? - Gilboa

2 11

datacenter, node becam non responsive after power cut
by moulayhakim3＠yahoo.com 22 Jun '22

22 Jun '22

hello team, i have self hosted engine, after power cut , the datacenter and node becam non responsive, can you help me please

1 0

Gluster Volume cannot be activated Ovirt 4.5 Centos 8 Stream
by m.rohweder＠itm-h.de 21 Jun '22

21 Jun '22

Hi, i convertet my ovirt 4.5 tu ovirt 4.5 hyperconverged. (activate on cluster the gluster service and reinstalled all hosts) I can create bricks on hosts and i'm able to create a Volume. All with the Ovirt GUI. But if i want to activate the Volume, i get the error mesage that no host with running gluster is found in my cluster. All hosts show message that ovirt think glusterd ist not running, but its running on all hosts. What can i du to use gluster with the lokal storage on each host? Greatings Michael

2 2

Ovirt 4.4 - starting just-installed host from ovirt console fails
by David Johnson 21 Jun '22

21 Jun '22

Good afternoon all, I recently had to rebuild my cluster due to a self inflicted error. I have finally managed to get the ovirt host software installed and communicating on all hosts. The first host installed and started cleanly. However, after installation the second host is failing to start. Prior to my cluster crash, this host was running well in the cluster. During the downtime, we applied microcode and BIOS updates as part of the recovery process. I have reviewed this chain: https://lists.ovirt.org/archives/list/users@ovirt.org/thread/N3PPT34GBRLPLT… and reached a dead end. Based on what I see (in the long stream of logs and info following), it looks like I should change the cluster CPU type from Cascadelake to Haswell to restore normal operation. The long involved stuff: The Engine reports: [image: image.png] Host CPU type is not compatible with Cluster Properties. [image: image.png] The host CPU does not match the Cluster CPU Type and is running in a degraded mode. It is missing the following CPU flags: model_Cascadelake-Server-noTSX. Please update the host CPU microcode or change the Cluster CPU Type. The Cluster definition is: [image: image.png] *lscpu returns:* Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 48 On-line CPU(s) list: 0-47 Thread(s) per core: 2 Core(s) per socket: 12 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation CPU family: 6 Model: 63 Model name: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz BIOS Model name: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Stepping: 2 CPU MHz: 3300.000 CPU max MHz: 3300.0000 CPU min MHz: 1200.0000 BogoMIPS: 4988.45 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 30720K NUMA node0 CPU(s): 0-11,24-35 NUMA node1 CPU(s): 12-23,36-47 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm cpuid_fault epb invpcid_single pti intel_ppin ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cqm xsaveopt cqm_llc cqm_occup_llc dtherm ida arat pln pts md_clear flush_l1d *cpuid returns:* CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = 0x6 (6) model = 0xf (15) stepping id = 0x2 (2) extended family = 0x0 (0) extended model = 0x3 (3) (family synth) = 0x6 (6) (model synth) = 0x3f (63) (simple synth) = Intel (unknown type) (Haswell C1/M1/R2) {Haswell}, 22nm *virsh domcapabilities returns:* <domainCapabilities> <path>/usr/libexec/qemu-kvm</path> <domain>kvm</domain> <machine>pc-i440fx-rhel7.6.0</machine> <arch>x86_64</arch> <vcpu max='240'/> <iothreads supported='yes'/> <os supported='yes'> <enum name='firmware'/> <loader supported='yes'> <value>/usr/share/OVMF/OVMF_CODE.secboot.fd</value> <enum name='type'> <value>rom</value> <value>pflash</value> </enum> <enum name='readonly'> <value>yes</value> <value>no</value> </enum> <enum name='secure'> <value>no</value> </enum> </loader> </os> <cpu> <mode name='host-passthrough' supported='yes'> <enum name='hostPassthroughMigratable'> <value>on</value> <value>off</value> </enum> </mode> <mode name='maximum' supported='yes'> <enum name='maximumMigratable'> <value>on</value> <value>off</value> </enum> </mode> <mode name='host-model' supported='yes'> <model fallback='forbid'>Haswell-noTSX-IBRS</model> <vendor>Intel</vendor> <feature policy='require' name='vme'/> <feature policy='require' name='ss'/> <feature policy='require' name='vmx'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='f16c'/> <feature policy='require' name='rdrand'/> <feature policy='require' name='hypervisor'/> <feature policy='require' name='arat'/> <feature policy='require' name='tsc_adjust'/> <feature policy='require' name='umip'/> <feature policy='require' name='md-clear'/> <feature policy='require' name='stibp'/> <feature policy='require' name='arch-capabilities'/> <feature policy='require' name='ssbd'/> <feature policy='require' name='xsaveopt'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='abm'/> <feature policy='require' name='invtsc'/> <feature policy='require' name='ibpb'/> <feature policy='require' name='ibrs'/> <feature policy='require' name='amd-stibp'/> <feature policy='require' name='amd-ssbd'/> <feature policy='require' name='skip-l1dfl-vmentry'/> <feature policy='require' name='pschange-mc-no'/> </mode> <mode name='custom' supported='yes'> <model usable='yes'>qemu64</model> <model usable='yes'>qemu32</model> <model usable='no'>phenom</model> <model usable='yes'>pentium3</model> <model usable='yes'>pentium2</model> <model usable='yes'>pentium</model> <model usable='yes'>n270</model> <model usable='yes'>kvm64</model> <model usable='yes'>kvm32</model> <model usable='yes'>coreduo</model> <model usable='yes'>core2duo</model> <model usable='no'>athlon</model> <model usable='yes'>Westmere-IBRS</model> <model usable='yes'>Westmere</model> <model usable='no'>Snowridge</model> <model usable='no'>Skylake-Server-noTSX-IBRS</model> <model usable='no'>Skylake-Server-IBRS</model> <model usable='no'>Skylake-Server</model> <model usable='no'>Skylake-Client-noTSX-IBRS</model> <model usable='no'>Skylake-Client-IBRS</model> <model usable='no'>Skylake-Client</model> <model usable='yes'>SandyBridge-IBRS</model> <model usable='yes'>SandyBridge</model> <model usable='yes'>Penryn</model> <model usable='no'>Opteron_G5</model> <model usable='no'>Opteron_G4</model> <model usable='no'>Opteron_G3</model> <model usable='yes'>Opteron_G2</model> <model usable='yes'>Opteron_G1</model> <model usable='yes'>Nehalem-IBRS</model> <model usable='yes'>Nehalem</model> <model usable='yes'>IvyBridge-IBRS</model> <model usable='yes'>IvyBridge</model> <model usable='no'>Icelake-Server-noTSX</model> <model usable='no'>Icelake-Server</model> <model usable='no' deprecated='yes'>Icelake-Client-noTSX</model> <model usable='no' deprecated='yes'>Icelake-Client</model> <model usable='yes'>Haswell-noTSX-IBRS</model> <model usable='yes'>Haswell-noTSX</model> <model usable='no'>Haswell-IBRS</model> <model usable='no'>Haswell</model> <model usable='no'>EPYC-Rome</model> <model usable='no'>EPYC-Milan</model> <model usable='no'>EPYC-IBPB</model> <model usable='no'>EPYC</model> <model usable='no'>Dhyana</model> <model usable='no'>Cooperlake</model> <model usable='yes'>Conroe</model> <model usable='no'>Cascadelake-Server-noTSX</model> <model usable='no'>Cascadelake-Server</model> <model usable='no'>Broadwell-noTSX-IBRS</model> <model usable='no'>Broadwell-noTSX</model> <model usable='no'>Broadwell-IBRS</model> <model usable='no'>Broadwell</model> <model usable='yes'>486</model> </mode> </cpu> <memoryBacking supported='yes'> <enum name='sourceType'> <value>file</value> <value>anonymous</value> <value>memfd</value> </enum> </memoryBacking> <devices> <disk supported='yes'> <enum name='diskDevice'> <value>disk</value> <value>cdrom</value> <value>floppy</value> <value>lun</value> </enum> <enum name='bus'> <value>ide</value> <value>fdc</value> <value>scsi</value> <value>virtio</value> <value>usb</value> <value>sata</value> </enum> <enum name='model'> <value>virtio</value> <value>virtio-transitional</value> <value>virtio-non-transitional</value> </enum> </disk> <graphics supported='yes'> <enum name='type'> <value>vnc</value> <value>spice</value> <value>egl-headless</value> </enum> </graphics> <video supported='yes'> <enum name='modelType'> <value>vga</value> <value>cirrus</value> <value>qxl</value> <value>virtio</value> <value>none</value> <value>bochs</value> <value>ramfb</value> </enum> </video> <hostdev supported='yes'> <enum name='mode'> <value>subsystem</value> </enum> <enum name='startupPolicy'> <value>default</value> <value>mandatory</value> <value>requisite</value> <value>optional</value> </enum> <enum name='subsysType'> <value>usb</value> <value>pci</value> <value>scsi</value> </enum> <enum name='capsType'/> <enum name='pciBackend'/> </hostdev> <rng supported='yes'> <enum name='model'> <value>virtio</value> <value>virtio-transitional</value> <value>virtio-non-transitional</value> </enum> <enum name='backendModel'> <value>random</value> <value>egd</value> <value>builtin</value> </enum> </rng> <filesystem supported='yes'> <enum name='driverType'> <value>path</value> <value>handle</value> <value>virtiofs</value> </enum> </filesystem> <tpm supported='yes'> <enum name='model'> <value>tpm-tis</value> <value>tpm-crb</value> </enum> <enum name='backendModel'> <value>passthrough</value> <value>emulator</value> </enum> </tpm> </devices> <features> <gic supported='no'/> <vmcoreinfo supported='yes'/> <genid supported='yes'/> <backingStoreInput supported='yes'/> <backup supported='yes'/> <sev supported='no'/> </features> </domainCapabilities> Please advise.

1 1

Preferred RHEL Based Distro For oVirt
by Clint Boggio 21 Jun '22

21 Jun '22

Good Day All; i am inquiring about which RHEL based distros are currently preferred and which ones are currently supported. I know the oVirt project is a RH entity and so RHEL and CentOS-Stream are the base offering. Would it, or is it, feasible for Rocky 8.X, or Alma 8.X to be the base OS for an oVirt deployment seeing as though they both RHEL clones ? How confident is the user community in the stability of CentOS-Stream in terms of production use as compared to Alma or Rocky ?

3 4

failed to mount hosted engine gluster storage - how to debug?
by diego.ercolani＠ssis.sm 21 Jun '22

21 Jun '22

Hello, I have an issue probably related to my particular implementation but I think some controls are missing Here is the story. I have a cluster of two nodes 4.4.10.3 with an upgraded kernel as the cpu (Ryzen 5) suffer from an incompatibility issue with the kernel provided by 4.4.10.x series. On each node there are three glusterfs "partitions" in replica mode, one for the hosted_engine, the other two are for user usage. The third node was an old i3 workstation only used to provide the arbiter partition to the glusterfs cluster. I installed a new server (ryzen processor) with 4.5.0 and successfully installed glusterfs 10.1 and inserted the arbiter bricks implemented on glusterfs 10.1 while the replica bricks are 8.6 after removing the old i3 provided bricks. I successfully imported the new node in the ovirt engine (after updating the engine to 4.5) The problem is that the ovirt-ha-broker doesn't start complaining that is not possible to connect the storage. (I suppose the hosted_engine storage) so I did some digs that I'm going to show here: #### 1. The node seem to be correctly configured: [root@ovirt-node3 devices]# vdsm-tool validate-config SUCCESS: ssl configured to true. No conflicts [root@ovirt-node3 devices]# vdsm-tool configure Checking configuration status... libvirt is already configured for vdsm SUCCESS: ssl configured to true. No conflicts sanlock is configured for vdsm Managed volume database is already configured lvm is configured for vdsm Current revision of multipath.conf detected, preserving Running configure... Done configuring modules to VDSM. [root@ovirt-node3 devices]# vdsm-tool validate-config SUCCESS: ssl configured to true. No conflicts #### 2. the node refuses to mount via hosted-engine (same error in broker.log) [root@ovirt-node3 devices]# hosted-engine --connect-storage Traceback (most recent call last): File "/usr/lib64/python3.6/runpy.py", line 193, in _run_module_as_main "__main__", mod_spec) File "/usr/lib64/python3.6/runpy.py", line 85, in _run_code exec(code, run_globals) File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_setup/connect_storage_server.py", line 30, in <module> timeout=ohostedcons.Const.STORAGE_SERVER_TIMEOUT, File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/client/client.py", line 312, in connect_storage_server sserver.connect_storage_server(timeout=timeout) File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/storage_server.py", line 451, in connect_storage_server 'Connection to storage server failed' RuntimeError: Connection to storage server failed ##### 3. manually mount of glusterfs work correctly [root@ovirt-node3 devices]# grep storage /etc/ovirt-hosted-engine/hosted-engine.conf storage=ovirt-node2.ovirt:/gveng # The following are used only for iSCSI storage [root@ovirt-node3 devices]# [root@ovirt-node3 devices]# mount -t glusterfs ovirt-node2.ovirt:/gveng /mnt/tmp/ [root@ovirt-node3 devices]# ls -l /mnt/tmp total 0 drwxr-xr-x. 6 vdsm kvm 64 Dec 15 19:04 7b8f1cc9-e3de-401f-b97f-8c281ca30482 What else should I control? Thank you and sorry for the long message Diego

5 9

Virtual disk shareable checkbox is greyed out when using GlusterFS storage domains
by Ken Holmes 21 Jun '22

21 Jun '22

Is there a work around that will allow multiple VM's to share a disk with out using the network? I read Dave White's Thread but saw no resolution except maybe using NetApp. Thanks

1 0

moVirt delisted from Google Play
by Filip Krepinsky 21 Jun '22

21 Jun '22

Hi all, Unfortunately, we decided to delist moVirt from Google Play. As you might have noticed, the app has not been maintained for some time and also the main repository https://github.com/oVirt/moVirt has been archived. It is not possible for us to maintain store presence due to new requirements for Google APIs (and thus our libraries that are obsolete at this point), app interoperability and in general to fulfill expectations of our users. For users who still wish to use moVirt, you can keep your current application installed or download an APK ( https://github.com/oVirt/moVirt/releases/tag/v2.1) and install moVirt manually. Just keep in mind that the app might not behave properly (mostly on newer versions of Android). I hope moVirt has been helpful with managing your envs :) Best regards, Filip

1 0

Dedicated Migration Network
by Clint Boggio 21 Jun '22

21 Jun '22

Good Day All; I am in the process of assembling a new oVirt cluster and I am wondering if there is any benefit to having a dedicated set of nics solely dedicated to VM migration. If so, would those nics (bonded) be on their own vlan and subnet or would they share a subnet with gluster storage or the management network ? Right now i'm planning on the following architecture. 1. Management = 10G X2 Bond per hypervisor host (10.66.0.0/24) 2. Gluster/iSCSI Storage = 10G X2 Bond per hypervisor host (10.244.0.0/24) 3. VM Production Network(s) = 10G X2 Bond per hypervisor host (No IP Range) 4. ?? Possible Dedicated VM Migration Thank you very much as any input would be greatly appreciated

4 6

"Retrieval of iSCSI targets failed" during hosted engine deployment on oVirt node 4.5
by pat＠patfruth.com 21 Jun '22

21 Jun '22

I have freshly installed ovirt node 4.5 from the iso download here; https://resources.ovirt.org/pub/ovirt-4.5/iso/ovirt-node-ng-installer/4.5.0… output from 'rpm -qa | grep ovirt' shows ovirt-hosted-engine-setup-2.6.3-1.el8.noarch ovirt-imageio-daemon-2.4.3-1.el8.x86_64 python38-ovirt-engine-sdk4-4.5.1-1.el8.x86_64 ovirt-imageio-common-2.4.3-1.el8.x86_64 ovirt-node-ng-image-update-placeholder-4.5.0.3-1.el8.noarch ovirt-openvswitch-2.15-3.el8.noarch python38-ovirt-imageio-client-2.4.3-1.el8.x86_64 ovirt-openvswitch-ipsec-2.15-3.el8.noarch ovirt-openvswitch-ovn-common-2.15-3.el8.noarch ovirt-openvswitch-ovn-host-2.15-3.el8.noarch centos-release-ovirt45-8.7-1.el8s.noarch ovirt-provider-ovn-driver-1.2.36-1.el8.noarch ovirt-host-dependencies-4.5.0-3.el8.x86_64 ovirt-release-host-node-4.5.0.3-1.el8.x86_64 ovirt-ansible-collection-2.0.3-1.el8.noarch ovirt-vmconsole-1.0.9-1.el8.noarch python3-ovirt-engine-sdk4-4.5.1-1.el8.x86_64 ovirt-node-ng-nodectl-4.4.2-1.el8.noarch ovirt-openvswitch-ovn-2.15-3.el8.noarch ovirt-hosted-engine-ha-2.5.0-1.el8.noarch ovirt-host-4.5.0-3.el8.x86_64 ovirt-engine-appliance-4.5-20220511122240.1.el8.x86_64 ovirt-vmconsole-host-1.0.9-1.el8.noarch ovirt-python-openvswitch-2.15-3.el8.noarch python38-ovirt-imageio-common-2.4.3-1.el8.x86_64 python3-ovirt-node-ng-nodectl-4.4.2-1.el8.noarch cockpit-ovirt-dashboard-0.16.0-1.el8.noarch python3-ovirt-setup-lib-1.3.3-1.el8.noarch ovirt-imageio-client-2.4.3-1.el8.x86_64 During the hosted engine deployment process, I get thru Step 3 ( the "Prepare VM" step) successfully. On Step 4 (Storage Settings), I set; - Storage type = iSCSI - Portal IP address = my ISCSI target's ip address - Accept the default Portal port number, which is already set to 3260 - Leave username & password blank (as I have no CHAP configured on the ISCSI target system) When I click the "Retrieve Target List" button there is a brief pause, followed by red error message which says "Retrieval of iSCSI targets failed" Upon reviewing the files in /var/log/ovirt-hosted-engine-setup on the ovirt node, I find a new log file named ovirt-hosted-engine-setup-ansible-iscsi_discover-20220614084053-in517x.log The message near the end of the log file are as follows; ------ snip ------ ..... 2022-06-14 08:41:03,510-0600 INFO ansible task start {'status': 'OK', 'ansible_type': 'task', 'ansible_playbook': '/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 'ansible_task': 'ovirt.ovirt.hosted_engine_setup : iSCSI discover'} 2022-06-14 08:41:03,511-0600 DEBUG ansible on_any args TASK: ovirt.ovirt.hosted_engine_setup : iSCSI discover kwargs is_conditional:False 2022-06-14 08:41:03,511-0600 DEBUG ansible on_any args localhost TASK: ovirt.ovirt.hosted_engine_setup : iSCSI discover kwargs 2022-06-14 08:41:06,430-0600 DEBUG var changed: host "localhost" var "ansible_play_hosts" type "<class 'list'>" value: "[]" 2022-06-14 08:41:06,430-0600 DEBUG var changed: host "localhost" var "ansible_play_batch" type "<class 'list'>" value: "[]" 2022-06-14 08:41:06,430-0600 DEBUG var changed: host "localhost" var "play_hosts" type "<class 'list'>" value: "[]" 2022-06-14 08:41:06,431-0600 ERROR ansible failed { "ansible_host": "localhost", "ansible_playbook": "/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml", "ansible_result": { "_ansible_no_log": false, "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_host_payload_ky4zlp1s/ansible_ovirt_host_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_host.py\", line 638, in main\nTypeError: int() argument must be a string, a bytes-like object or a number, not 'NoneType'\n", "invocation": { "module_args": { "activate": true, "address": null, "check_upgrade": true, "cluster": null, "comment": null, "enroll_certificate": false, "fetch_nested": false, "force": false, "hosted_engine": null, "id": null, "iscsi": { "address": "192.168.1.2", "password": "", "port": null, "username": "" }, "kdump_integration": null, "kernel_params": null, "name": "ovirt-node01.internal.net", "nested_attributes": [], "override_display": null, "override_iptables": null, "password": null, "poll_interval": 3, "power_management_enabled": null, "public_key": false, "reboot_after_installation": null, "reboot_after_upgrade": true, "spm_priority": null, "ssh_port": null, "state": "iscsidiscover", "timeout": 600, "vgpu_placement": null, "wait": true } }, "msg": "int() argument must be a string, a bytes-like object or a number, not 'NoneType'" }, "ansible_task": "iSCSI discover", "ansible_type": "task", "status": "FAILED", "task_duration": 3 } 2022-06-14 08:41:06,431-0600 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9c76744370> kwargs ignore_errors:None 2022-06-14 08:41:06,432-0600 INFO ansible stats { "ansible_playbook": "/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml", "ansible_playbook_duration": "00:11 Minutes", "ansible_result": "type: <class 'dict'>\nstr: {'localhost': {'ok': 5, 'failures': 1, 'unreachable': 0, 'changed': 0, 'skipped': 0, 'rescued': 0, 'ignored': 0}}", "ansible_type": "finish", "status": "FAILED" } 2022-06-14 08:41:06,432-0600 INFO SUMMARY: Duration Task Name -------- -------- [ < 1 sec ] Execute just a specific set of steps [ 00:01 ] Force facts gathering [ 00:03 ] Obtain SSO token using username/password credentials [ 00:03 ] Fetch host facts [ FAILED ] iSCSI discover 2022-06-14 08:41:06,432-0600 DEBUG ansible on_any args <ansible.executor.stats.AggregateStats object at 0x7f9c793444c0> kwargs ------ snip ------ The error suggest that the iSCSI portal port number (which is defaulted to 3260 in the UI) is not being properly passed into the python module ovirt/ovirt/plugins/modules/ovirt_host.py Looking at the code at line 638 of ovirt_host.py, found here; https://github.com/oVirt/ovirt-ansible-collection/blob/2.0.3-1/plugins/modu… I see; ..... elif state == 'iscsidiscover': host_id = get_id_by_name(hosts_service, module.params['name']) iscsi_param = module.params['iscsi'] iscsi_targets = hosts_service.service(host_id).discover_iscsi( iscsi=otypes.IscsiDetails( port=int(iscsi_param.get('port', 3260)), <---- line 638 username=iscsi_param.get('username'), password=iscsi_param.get('password'), address=iscsi_param.get('address'), portal=iscsi_param.get('portal'), ), ) ret = { 'changed': False, 'id': host_id, 'iscsi_targets': [iscsi.target for iscsi in iscsi_targets], 'iscsi_targets_struct': [get_dict_of_struct( struct=iscsi, connection=connection, fetch_nested=module.params.get('fetch_nested'), attributes=module.params.get('nested_attributes'), ) for iscsi in iscsi_targets], } ..... I'm not a Python expert, so I can't tell if this logic is correct or not. Looking at Git history on this code, it looks like the last time a change was made effecting ISCSI was in May of 2021; https://github.com/oVirt/ovirt-ansible-collection/commit/1c4c18d844a69b821f… By Martin Necas - https://github.com/mnecas I gotta believe I'm not the first one to try setting up oVirt 4.5 hosted engine with ISCSI storage. Is anyone else out there using ISCSI storage with oVirt 4.5.0.3 yet? How did you get it working?

2 2

Release announcement: go-ovirt-client 1.0.0, terraform-provider-ovirt 2.0.0
by Janos Bonic 20 Jun '22

20 Jun '22

Hey there folks, Just a quick announcement, we have released the first stable version of *go-ovirt-client*, an overlay for the go SDK which you can find here: https://github.com/ovirt/go-ovirt-client and the docs are available here: https://pkg.go.dev/github.com/ovirt/go-ovirt-client In parallel, we also released the first stable version of the *overhauled Terraform provider*, which is available on the Terraform registry: https://registry.terraform.io/providers/oVirt/ovirt/latest/docs Thank you to everyone who worked on this over the last year and made it possible. Contributors lists are here: https://github.com/oVirt/go-ovirt-client/graphs/contributors and here: https://github.com/oVirt/terraform-provider-ovirt/graphs/contributors If you run into problems, our GitHub issue box is always open. :) Cheers, Janos

1 0

Issue adding host to ovirt 4.4 cluster
by David Johnson 20 Jun '22

20 Jun '22

Good morning all, I am attempting to add a host to my ovirt 4.4 cluster. The installation of the first host went smoothly, but the installation of the second host stalled. Currently, the second host is in Installing state, but doing nothing. The installation failed due to a failure to register the host certificate. I cannot change the state of the host or retry the installation to capture logs. Warnings from the host that are visible on the ovirt console are: - Power Management is not configured for this Host. Enable Power Management - Host has no default route. - The host CPU does not match the Cluster CPU Type and is running in a degraded mode. It is missing the following CPU flags: vmx, model_Cascadelake-Server-noTSX. Please update the host CPU microcode or change the Cluster CPU Type. The error message generated at the last attempt to install the host from the ovirt console is: - Failed to enroll certificate for host ovirt-host-04 (User: admin@internal-authz). Please advise

1 1

Re: Dedicated Migration Network
by Clint Boggio 20 Jun '22

20 Jun '22

Thank you Abe, Angus, and Strahil. I appreciate your direction and input.

1 0

Re: oVirt 4.4.x step-by-step procedure to renew expired oVirt certificates
by Nathanaël Blanchet 20 Jun '22

20 Jun '22

Hi, Le 17/06/2022 à 12:18, Marko Vrgotic a écrit : > > Dear Nathanael, > > Thank you very much for you reply. Regarding host expiration playbook > you wrote – my compliments – is it safe to run on host with expired > certificates, or its rather meant to be executed for renewal of certs > on hosts with still valid certs? > both are okay, in case of a host in "up" status, it will go down during the playbook execution, but vms will continue to run without any downtime. Host will recover and go up once certificates will be successfully renewed. This is an emergency procedure, the best solution to renew a certificate on a running host is to put the host into maintenance and renew certs via UI. > We have also found following script which should at least safely take > care of the renewal of certs on host with already expired certificates > - . > > https://github.com/tothf/renew_vdsm_cert/blob/main/renew_vdsm_cert.sh > > ----- > > kind regards/met vriendelijke groeten > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174** > > *e:*m.vrgotic@activevideo.com <mailto:m.vrgotic@activevideo.com> > *w: *www.activevideo.com <http://www.activevideo.com> > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > 1.1217 WJ Hilversum, The Netherlands. The information contained in > this message may be legally privileged and confidential. It is > intended to be read only by the individual or entity to whom it is > addressed or by their designee. If the reader of this message is not > the intended recipient, you are on notice that any distribution of > this message, in any form, is strictly prohibited. If you have > received this message in error, please immediately notify the sender > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > delete or destroy any copy of this message. > > *From: *Nathanaël Blanchet <blanchet(a)abes.fr> > *Date: *Thursday, 16 June 2022 at 14:40 > *To: *Marko Vrgotic <M.Vrgotic(a)activevideo.com>, users(a)ovirt.org > <users(a)ovirt.org> > *Subject: *Re: [ovirt-users] oVirt 4.4.x step-by-step procedure to > renew expired oVirt certificates > > ***CAUTION: This email originated from outside of the organization. Do > not click links or open attachments unless you recognize the sender!!!*** > > Hello, > > If you refer to: > > 1. engine apache certificate expiration ("PKIX path building failed: > sun.security.provider.certpath.SunCertPathBuilderException:) to > access to ovirt console. > => engine-setup --offline > 2. hosts certificate expiration? > => https://access.redhat.com/solutions/3532921 > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Faccess.re…> > I also wrote a playbook to do so there: > https://galaxy.ansible.com/natman/ovirt_renew_certs > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgalaxy.an…> > In this case, don't forget to renew certificate with UI (into > maintenance) when host is reponding, otherwise you may enconter > issues with console or live migration or other SSL related stuff. > > tested and approved. > > Le 16/06/2022 à 12:34, Marko Vrgotic a écrit : > > Dear oVirt, > > The oVirt SSL certificated were changed to one-year renewal and we > have a problem now. > > We are running 4.4.x version with SHE on local storage cluster and > we have four more local storage clusters. > > One the cluster running SHE, the engine and host certificates have > expired. We found the procedure for renewal prior to expiration, > but we do not have a mnual one, required once certificates have > expired. > > Would you be so kind to share the manual or steps needed to fix > our oVirt setup. > > Thank you in advance. > > ----- > > kind regards/met vriendelijke groeten > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174 > > *e:*m.vrgotic@activevideo.com <mailto:m.vrgotic@activevideo.com> > *w: *www.activevideo.com <http://www.activevideo.com> > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > 1.1217 WJ Hilversum, The Netherlands. The information contained in > this message may be legally privileged and confidential. It is > intended to be read only by the individual or entity to whom it is > addressed or by their designee. If the reader of this message is > not the intended recipient, you are on notice that any > distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please > immediately notify the sender and/or ActiveVideo Networks, LLC by > telephone at +1 408.931.9200 and delete or destroy any copy of > this message. > > > > _______________________________________________ > > Users mailing list --users(a)ovirt.org > > To unsubscribe send an email tousers-leave(a)ovirt.org > > Privacy Statement:https://www.ovirt.org/privacy-policy.html <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/5LOT… <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> > > -- > Nathanaël Blanchet > Supervision réseau > SIRE > 227 avenue Professeur-Jean-Louis-Viala > 34193 MONTPELLIER CEDEX 5 > Tél. 33 (0)4 67 54 84 55 > Fax 33 (0)4 67 54 84 14 > blanchet(a)abes.fr -- Nathanaël Blanchet Supervision réseau SIRE 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

1 0

After attaching the Storage domain, the VMs are disappeared from the VM import
by aminur.rahman＠iongroup.com 20 Jun '22

20 Jun '22

Hi, We're noticing some weird issue while re-attaching the storage domain. After re-attach the storage domain, some VMs are completely missing from the VM Import. Before detaching the storage domain, all the VMs were shutdown gracefully. I also noticed some disks are exists with no Alias under the disk import on the storage domain and I can't import those disks. Its failed to register the disk with <UNKONOWN> error. We're using Ovirt 4.2 with multiple Dell hosts in the cluster and Compellent SAN with iSCSI volumes. Please kindly advise if I am missing anything before detach the storage domain. Thanks

4 4

Delete the post :
by khznm 21 18 Jun '22

18 Jun '22

Dear Admin Pls delete the post under the below subject line , posted on June 18, 2022, 3:51 p.m. [ovirt-users] The he_fqdn proposed for the engine VM resolves on this host The post is incorrect and the problem was corrected sorry for the inconvenience caused. regards/khznm

1 0

The he_fqdn proposed for the engine VM resolves on this host
by khznm 21 18 Jun '22

18 Jun '22

Installing oVirt is not so easy as stated, i am struck up in FQDN resolution , i have this FQDN (vmanager.headache.com) resolve to ip 10.1.1.6 in DNS within the network,additionally i also input this entries into /etc/hosts file. while installing ( may be 8 times ) ,i am struck up with error " he_fqdn proposed for the engine VM resolves on this host " . The network is using vlan ip, the host is already installed bare metal into cisco c240-m5 with RH virtualization ver 4.4 ,its installed on IP :10.1.1.5. the problem is with installing the self hosted engine (ovirt). the vlan are like eno2.vlan7 and eno2.vlan7.1 /etc/hosts 10.1.1.6 vmanager.headache.com vmanager 10.1.1.5 vhrh1.headache.com vhrh1 10.1.1.6 vmanager.headache.com 10.1.1.5 vhrh1.headache.com i even tried cli install,,here also the same issue .. below are the error .. Host name is not valid: vmanager.headache.com resolves to 10.1.1.6 Host name is not valid: vman.headache.com did not resolve into an IP address Pls any body help here ,,,what i am doing wrong...

1 1

Cannot log into oVirt Manager - certificate issue
by Diggy Mc 18 Jun '22

18 Jun '22

I cannot log into oVirt Manager. My browser gave me a warning that the site's certificate has expired. Then when I try to log in, I receive the following error message: "PKIX path validation failed: java.security.cert.CertPathValidatorException: validity check failed" How can I fix this problem? In advance, thank you for your help. hosted-engine: v4.4.8.6 hosts: oVirt Node v4.4.8.3

7 24

Re: oVirt 4.4.x step-by-step procedure to renew expired oVirt certificates
by Nathanaël Blanchet 17 Jun '22

17 Jun '22

Hello, If you refer to: 1. engine apache certificate expiration ("PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException:) to access to ovirt console. => engine-setup --offline 2. hosts certificate expiration? => https://access.redhat.com/solutions/3532921 I also wrote a playbook to do so there: https://galaxy.ansible.com/natman/ovirt_renew_certs In this case, don't forget to renew certificate with UI (into maintenance) when host is reponding, otherwise you may enconter issues with console or live migration or other SSL related stuff. tested and approved. Le 16/06/2022 à 12:34, Marko Vrgotic a écrit : > > Dear oVirt, > > The oVirt SSL certificated were changed to one-year renewal and we > have a problem now. > > We are running 4.4.x version with SHE on local storage cluster and we > have four more local storage clusters. > > One the cluster running SHE, the engine and host certificates have > expired. We found the procedure for renewal prior to expiration, but > we do not have a mnual one, required once certificates have expired. > > Would you be so kind to share the manual or steps needed to fix our > oVirt setup. > > Thank you in advance. > > ----- > > kind regards/met vriendelijke groeten > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174** > > *e:*m.vrgotic@activevideo.com <mailto:m.vrgotic@activevideo.com> > *w: *www.activevideo.com <http://www.activevideo.com> > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > 1.1217 WJ Hilversum, The Netherlands. The information contained in > this message may be legally privileged and confidential. It is > intended to be read only by the individual or entity to whom it is > addressed or by their designee. If the reader of this message is not > the intended recipient, you are on notice that any distribution of > this message, in any form, is strictly prohibited. If you have > received this message in error, please immediately notify the sender > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > delete or destroy any copy of this message. > > > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org > Privacy Statement:https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/5LOT… -- Nathanaël Blanchet Supervision réseau SIRE 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

3 4

Cant fix network
by David Johnson 17 Jun '22

17 Jun '22

Good afternoon all, Welcome to the third part of my trilogy of disaster recovery woes. Much of my woe is self inflicted, but I have learned enough from this that I now know how to ask the right question about the original problem that got me here. After reinstalling the engine from the ground up, ovirt immediately recognized the first host (yay) whose network configuration I had manually fixed on the host console. I removed the host from the engine, stripped its system down to the bare OS, then attempted to reinstall ovirt. Apparently the original network configuration is still saved on the host, because reinstall kicks the host off of the management network, replacing the good configuration that I just made on the host with the bad one that was the original cause of my heartache. What is wrong with this configuration is that the storage network is on a 10 gbit sfp+ physical network, isolated from the 1 gbit ovirtmgt network with RJ12 connectors. There is no way to bridge the two networks Here is the original (bad) configuration: [image: image.png] Here is the corrected configuration. Note that it wont let me connect to the network. it's frustrating because I know that the engine is not communicating with the host, and I can map out the fix here, but I can't save it. [image: image.png] It will not allow me to remove the host or switch the host to inoperable or maintenance mode. Please advise.

2 2

1 Unsynced Entry
by Abe E 16 Jun '22

16 Jun '22

I am having an issue on 1 single node where it is reporting 1 unsynced entry and it is not healing by itself or by force. In the glustershd.log it is reporting the following: W [MSGID: 114031] [client-rpc-fops_v2.c:2620:client4_0_lookup_cbk] 0-data-client-2: remote operation failed. [{path=<gfid:a8769008-3658-400f-b3ba-c0df40e648a7>}, {gfid=a8769008-3658-400f-b3ba-c0df40e648a7}, {errno=2}, {error=No such file or directory}] I assume if it was missing it would look to other nodes for it but I understand from this that even other nodes do not have it?

1 0

OVIRT Package Upgrade Interrupted
by Abe E 16 Jun '22

16 Jun '22

It seems I haven't learned my lesson with upgrading via GUI. For some reason my server crashed during use of the GUI Upgrade method and it looks like maybe it did not complete or the like. 3NodeGluster I then noticed that I had actually upgrading a single node to the 4.5.1 Testing Version, that being said my glusterfs for this node is on 10.2 while other nodes are on 10.1. Is there a "cleaner" way of reverting the upgrade? I assume there are other packages that may have been upgraded that should be reverted.

2 4

Dead agent
by Valerio Luccio 16 Jun '22

16 Jun '22

Hello all, I have an ovirt 4.4 installation whit self-hosted engine where the agent seems to have died. The VMs are still running, so I assume that the engine itself is still running (is this a wrong assumption ?). Can I restart the agent without affecting the running VMs, that is how will restarting the agent affect the running VMs ? If I can restart the agent, what's the correct way of doing it ? Thanks, -- Valerio Luccio High Performance Computing 10 Astor Place, Room 416D New York University New York, NY 10003 "In an open world, who needs windows or gates ?"

2 2

oVirt 4.4.x step-by-step procedure to renew expired oVirt certificates
by Marko Vrgotic 16 Jun '22

16 Jun '22

Dear oVirt, The oVirt SSL certificated were changed to one-year renewal and we have a problem now. We are running 4.4.x version with SHE on local storage cluster and we have four more local storage clusters. One the cluster running SHE, the engine and host certificates have expired. We found the procedure for renewal prior to expiration, but we do not have a mnual one, required once certificates have expired. Would you be so kind to share the manual or steps needed to fix our oVirt setup. Thank you in advance. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

1 0

libvirtd: dependencies is missing or not an array
by jb 16 Jun '22

16 Jun '22

Hello everybody, in the Protocols from node cockpit, I get some times a day this error: internal error: dependencies is missing or not an array CODE_FILE ../src/util/virjson.c CODE_FUNC virJSONValueObjectGetStringArray CODE_LINE 1324 LIBVIRT_CODE 1 LIBVIRT_DOMAIN 0 LIBVIRT_SOURCE util.error PRIORITY 3 SYSLOG_FACILITY 24 _BOOT_ID 0d6bdd9755d44dac8afe2207f6d69f8d _CAP_EFFECTIVE 1ffffffffff _CMDLINE /usr/sbin/libvirtd _COMM libvirtd _EXE /usr/sbin/libvirtd _GID 0 _HOSTNAME onode1.example.org _MACHINE_ID 977a6d184c604d42ad81ac03904ccba7 _PID 2505 _SELINUX_CONTEXT system_u:system_r:virtd_t:s0-s0:c0.c1023 _SOURCE_REALTIME_TIMESTAMP 1655362628796631 _SYSTEMD_CGROUP /system.slice/libvirtd.service _SYSTEMD_INVOCATION_ID f7685b24f045456aac53ce1673f143c7 _SYSTEMD_SLICE system.slice _SYSTEMD_UNIT libvirtd.service _TRANSPORT journal Is this something I have to worry about it?

1 0

Ovirt manager engine certificate expired
by Don Dupuis 16 Jun '22

16 Jun '22

Hello I have an older installation that was running just great and the certificate expired, it is version 4.2.8.2. I ran the engine-setup as per this "access.redhat.com/solutions/4780411". It didn't update the certificate or the dates and stil have the same issue. Any ideas to fix this issue? Thanks Don

1 2

oVirt 4.5 linux guest vm with host device added to it fails to start
by Don Dupuis 15 Jun '22

15 Jun '22

Hello I have a RHEL 8.6 based hypervisor with a Mellanox ConnectX-5 IB card installed with SRIOV enabled. The host device I am assigning is pci_0000_af_00_2. The card is working as I can talk to other infiniband interfaces on other servers. Below is the output of lspci. 3b:00.0 Ethernet controller: Mellanox Technologies MT27800 Family [ConnectX-5] 3b:00.1 Ethernet controller: Mellanox Technologies MT27800 Family [ConnectX-5] af:00.0 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5] af:00.1 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5 Virtual Function] af:00.2 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5 Virtual Function] af:00.3 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5 Virtual Function] af:00.4 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5 Virtual Function] The linux vm is configured as Q35 Chipset with UEFI, 16 cpus, numa enabled, and cpu pinning enabled. OS is RHEL 7.9. As soon as I start the vm, I get an immediate error message stating "Cannot run VM. There is no host that satisfies current scheduling constraints. See below for details:, The host rvsh002 did not satisfy internal filter HostDevice because some of the required host devices are unavailable." If I remove the host device from the vm config, then it starts and runs fine. This setup was working just fine on RHEL8.4 and oVirt 4.4.7 using the proper driver for RHEL 8.4. Here is the engine.log after I press the run button. 2022-06-10 11:22:10,506-05 INFO [org.ovirt.engine.core.bll.RunVmCommand] (default task-1) [81144b66-e5f9-474e-a922-e2ce49cdc8ca] Lock Acquired to object 'EngineLock:{exclusiveLocks='[de54b903-7204-4966-95a3-05f64ed17f68=VM]', sharedLocks=''}' 2022-06-10 11:22:10,520-05 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (default task-1) [81144b66-e5f9-474e-a922-e2ce49cdc8ca] START, IsVmDuringInitiatingVDSCommand( IsVmDuringInitiatingVDSCommandParameters:{vmId='de54b903-7204-4966-95a3-05f64ed17f68'}), log id: 6faf22a5 2022-06-10 11:22:10,520-05 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (default task-1) [81144b66-e5f9-474e-a922-e2ce49cdc8ca] FINISH, IsVmDuringInitiatingVDSCommand, return: false, log id: 6faf22a5 2022-06-10 11:22:10,560-05 INFO [org.ovirt.engine.core.bll.scheduling.SchedulingManager] (default task-1) [] Candidate host 'rvsh002' ('f68352c2-6ddc-44ae-a19b-9262e92327f8') was filtered out by 'VAR__FILTERTYPE__INTERNAL' filter 'HostDevice' (correlation id: null) 2022-06-10 11:22:10,569-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-1) [] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM ws006 due to a failed validation: [Cannot run VM. There is no host that satisfies current scheduling constraints. See below for details:, The host rvsh002 did not satisfy internal filter HostDevice because some of the required host devices are unavailable.] (User: admin@internal-authz). 2022-06-10 11:22:10,569-05 WARN [org.ovirt.engine.core.bll.RunVmCommand] (default task-1) [] Validation of action 'RunVm' failed for user admin@internal-authz. Reasons: VAR__ACTION__RUN,VAR__TYPE__VM,SCHEDULING_ALL_HOSTS_FILTERED_OUT,VAR__FILTERTYPE__INTERNAL,$hostName rvsh002,$filterName HostDevice,VAR__DETAIL__HOST_DEVICE_UNAVAILABLE,SCHEDULING_HOST_FILTERED_REASON_WITH_DETAIL 2022-06-10 11:22:10,570-0 There was nothing in the vdsm.log on the hypervisor related to this issue that I could see after hitting the run button. Thanks Don

2 4

dnf update fails on ovirt node 4.5.0-2022052513
by pat＠patfruth.com 14 Jun '22

14 Jun '22

I have freshly install ovirt node 4.5 from the iso download here; https://resources.ovirt.org/pub/ovirt-4.5/iso/ovirt-node-ng-installer/4.5.0… The installation appears to have been successful. Now, when I attempt apply the latest updates with 'dnf update', I get an error [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 Here is the entire output of the dnf update command; Last metadata expiration check: 0:47:08 ago on Mon 13 Jun 2022 10:55:35 PM MDT. Dependencies resolved. ======================================================================================================================================================================= Package Architecture Version Repository Size ======================================================================================================================================================================= Installing: ovirt-node-ng-image-update noarch 4.5.1-0.1.el8 ovirt-45-upstream-testing 1.1 G replacing ovirt-node-ng-image-update-placeholder.noarch 4.5.0.3-1.el8 Transaction Summary ======================================================================================================================================================================= Install 1 Package Total download size: 1.1 G Is this ok [y/N]: y Downloading Packages: [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [MIRROR] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: Interrupted by header callback: Server reports Content-Length: 1180431893 but expected size is: 1180857942 [FAILED] ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch.rpm: No more mirrors to try - All mirrors were already tried without success The downloaded packages were saved in cache until the next successful transaction. You can remove cached packages by executing 'dnf clean packages'. Error: Error downloading packages: ovirt-node-ng-image-update-4.5.1-0.1.el8.noarch: Cannot download, all mirrors were already tried without success How can I fix this error, and get the latest updates for 4.5 installed?

5 13

Initramfs and vmlinuz corrupted, how to recover?
by douglasddr8＠gmail.com 14 Jun '22

14 Jun '22

I have a Dell server with a BIOS bug, it corrupted the files during a UEFI boot. I noticed that the initramfs and vmlinuz files are zero-sized How can I retrieve or generate new ones?

3 2

4.4.10 -> 4.5 upgrade on gluster based setups
by Gilboa Davara 14 Jun '22

14 Jun '22

Hello all, I've more or less finished upgrading all my "small" oVirt setups (single hosts, multiple hosts + NFS, etc) and I'm now ready to start upgrading my main production setups. (All using 3 x nodes / gluster setup). A couple of questions: 1. Should I use the normal sequence, as in: engine, hosts, hosts, hosts? 2. Was the gluster bug below still open in the latest oVirt 4.5 release? https://lists.ovirt.org/archives/list/users@ovirt.org/thread/4LGBUOEBV7YNES… Thanks, Gilboa

2 2

Reinstall standalone node without vms loss
by douglasddr8＠gmail.com 14 Jun '22

14 Jun '22

My server failed and I can't boot via UEFI How can I reinstall this node (standalone) without losing my virtual machines?. I checked the filesystem and it's completely intact, I couldn't figure out what caused the UEFI to fail.

2 1

Install Ovirt 4.4.10 to standalone system from iso fails
by David Johnson 14 Jun '22

14 Jun '22

Hi everyone, I am attempting to reinstall as a clean system, and the install is failing silently. At the point where I should be able to run engine-setup, the engine setup utility is absent. Installation medium: iso downloaded from https://resources.ovirt.org/pub/ovirt-4.4/iso/ovirt-node-ng-installer/4.4.1… As I attempt to install the missing dependencies, I keep getting deeper into missing rpm land. If this iso is no longer any good, even though it is only 4 months old, it should probably be documented as bad or art least superceded by a fixed iso.

3 12

can't use vmconsole anymore
by Nathanaël Blanchet 13 Jun '22

13 Jun '22

Hi, I was used to use the vmconsole proxy, but since a while, I'm getting this issue (currently 4.4.5): # ssh -t -p 2222 ovirt-vmconsole(a)air.v100.abes.fr connect ovirt-vmconsole(a)air.v100.abes.fr: Permission denied (publickey). I found following in the engine.log 2021-04-15 17:55:43,094+02 ERROR [org.ovirt.engine.core.services.VMConsoleProxyServlet] (default task-4) [] Error validating ticket: : sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target at java.base/sun.security.provider.certpath.SunCertPathBuilder.build(SunCertPathBuilder.java:141) at java.base/sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:126) at java.base/java.security.cert.CertPathBuilder.build(CertPathBuilder.java:297) at org.ovirt.engine.core.uutils//org.ovirt.engine.core.uutils.crypto.CertificateChain.buildCertPath(CertificateChain.java:128) at org.ovirt.engine.core.uutils//org.ovirt.engine.core.uutils.crypto.ticket.TicketDecoder.decode(TicketDecoder.java:89) at deployment.engine.ear.services.war//org.ovirt.engine.core.services.VMConsoleProxyServlet.validateTicket(VMConsoleProxyServlet.java:175) at deployment.engine.ear.services.war//org.ovirt.engine.core.services.VMConsoleProxyServlet.doPost(VMConsoleProxyServlet.java:225) The user key is the good one, I use the same with my other engines and I can successfully connect to vm consoles. Thank you for helping -- Nathanaël Blanchet Supervision réseau SIRE 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

5 16