[Users] Hey using NFS as my main datastore
by Dominic Kaiser
I am using NFS share on an Openfile server as my main datastore went to
fire up a virtual instance this is the error I get:
VM Building_Automation is down. Exit message internal error process exited
while connecting to monitor: qemu-kvm: -drive
file=/rhev/data-center/c10c25e0-526a-11e1-a5e4-87fa674ffb5d/340dad49-2ec7-475e-b6c6-668504bdb5b1/images/da582689-2248-4d0e-a017-b09f8cfa9410/78340ab7-b1f5-4fad-9150-437e7ff9d14c,if=none,id=drive-virtio-disk0,format=raw,serial=0e-a017-b09f8cfa9410,cache=none,werror=stop,rerror=stop,aio=threads:
could not open disk image
/rhev/data-center/c10c25e0-526a-11e1-a5e4-87fa674ffb5d/340dad49-2ec7-475e-b6c6-668504bdb5b1/images/da582689-2248-4d0e-a017-b09f8cfa9410/78340ab7-b1f5-4fad-9150-437e7ff9d14c:
Permission denied .
Does vdsm have to be installed on the server that shares the main
datastore? Export and ISO are fine no problems.
--
Dominic Kaiser
Greater Boston Vineyard
Director of Operations
cell: 617-230-1412
fax: 617-252-0238
email: dominic(a)bostonvineyard.org
13 years, 1 month
Re: [Users] Pxeboot - pwd/login issue
by Li, David
Hi Mike,
I ran into the login/pwd problem again with this new build. Kernel option adminpw worked but only for a short time. I was asked to change pwd immediately after login but then rejected again after I did that. There was an short-lived error message on the screen but I wasn't able to capture it.
I tried the latest from archipel source and it worked without password issue. I pulled it from:
git clone https://github.com/primalmotion/Archipel.git
There might be a few updates right after you pulled it last time.
Would you mind merge the new updates into ovirt node again?
Thanks.
David
>-----Original Message-----
>From: Mike Burns [mailto:mburns@redhat.com]
>Sent: Thursday, February 09, 2012 5:10 PM
>To: Li, David
>Cc: Perry Myers; users(a)ovirt.org
>Subject: Re: [Users] Pxeboot
>
>On Thu, 2012-02-09 at 17:05 -0800, Li, David wrote:
>> Mike,
>> Built it finally!
>> Thanks a lot!
>
>Woot!
>
>>
>> >-----Original Message-----
>> >From: Mike Burns [mailto:mburns@redhat.com]
>> >Sent: Thursday, February 09, 2012 4:18 PM
>> >To: Li, David
>> >Cc: Perry Myers; users(a)ovirt.org
>> >Subject: Re: [Users] Pxeboot
>> >
>> >On Thu, 2012-02-09 at 15:50 -0800, Li, David wrote:
>> >> MIke,
>> >>
>> >> Got something new this time in make publish:
>> >>
>> >> /bin/sh: -c: line 36: syntax error near unexpected token `)'
>> >> /bin/sh: -c: line 36: `)'
>> >> make[1]: *** [repos.ks] Error 1
>> >> make[1]: Leaving directory
>> >> `/home/lid/workspace/ovirt/node-archipel-
>> >2.2.2/ovirt-node/recipe'
>> >> make: *** [distdir] Error 1
>> >>
>> >> [lid@FC16-1 ovirt-node]$ echo $OVIRT_CACHE_DIR
>$OVIRT_LOCAL_REPO
>> >> /home/lid/ovirt-cache file:///home/lid/ovirt-cache/ovirt
>> >> [lid@FC16-1 ovirt-node]$
>> >
>> >Oops, bad merge on my part.
>> >
>> >$ git reset --hard origin/master #sets you back to head of the
>> >master branch $ git fetch http://gerrit.ovirt.org/p/ovirt-node
>> >refs/changes/38/1738/3 && git cherry-pick FETCH_HEAD # checks out the
>new version of the patch set.
>> >
>> >Mike
>> >
>> >>
>> >>
>> >> - David
>> >> ________________________________________
>> >> From: Mike Burns [mburns(a)redhat.com]
>> >> Sent: Thursday, February 09, 2012 2:12 PM
>> >> To: Li, David
>> >> Cc: Perry Myers; users(a)ovirt.org
>> >> Subject: Re: [Users] Pxeboot
>> >>
>> >> On Thu, 2012-02-09 at 13:34 -0800, Li, David wrote:
>> >> > Mike,
>> >> >
>> >> > It seems it needs couple vdsm pkgs:
>> >> >
>> >> > ./node-creator ovirt-node-image.ks Error creating Live CD :
>> >> > Failed to find package 'vdsm-cli' : No
>> >> > package(s) available to install mv ovirt-node-image.iso
>> >> > ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
>> >> > mv: cannot stat `ovirt-node-image.iso': No such file or directory
>> >> > make: *** [ovirt-node-image.iso] Error 1
>> >> >
>> >> >
>> >> > can I remove them from ks files?
>> >>
>> >> Not if you want to use ovirt-node with ovirt-engine. There was a
>> >> bug in that patch set that is fixed in patch set 2 (along with the
>> >> bad ===== package). I hadn't pulled the patch set together and
>> >> uploaded to gerrit yet, but it's there now.
>> >>
>> >> git fetch http://gerrit.ovirt.org/p/ovirt-node
>> >> refs/changes/38/1738/2 && git checkout FETCH_HEAD
>> >>
>> >> This should fix the problem.
>> >>
>> >> Mike
>> >>
>> >> >
>> >> > - David
>> >> > ________________________________________
>> >> > From: Mike Burns [mburns(a)redhat.com]
>> >> > Sent: Thursday, February 09, 2012 12:07 PM
>> >> > To: Li, David
>> >> > Cc: Perry Myers; users(a)ovirt.org
>> >> > Subject: Re: [Users] Pxeboot
>> >> >
>> >> > On Thu, 2012-02-09 at 11:52 -0800, Li, David wrote:
>> >> > > It's still the same error:
>> >> > >
>> >> > > [lid@FC16-1 ovirt-node]$ cd recipe/
>> >> > > [lid@FC16-1 recipe]$ make ovirt-node-image.iso ( \
>> >> > > echo "PRODUCT='"oVirt Node Hypervisor"'" ;\
>> >> > > echo "PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
>> >> > > echo "PACKAGE=ovirt-node-image" ;\
>> >> > > echo "VERSION=2.2.3" ;\
>> >> > > echo "RELEASE=0.1fc16.git16688ea" ;\
>> >> > > ) > version.ks
>> >> > > ./node-creator ovirt-node-image.ks Error creating Live CD :
>> >> > > Failed to find package '=======' : No package(s) available to
>> >> > > install mv ovirt-node-image.iso
>> >> > > ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
>> >> > > mv: cannot stat `ovirt-node-image.iso': No such file or
>> >> > > directory
>> >> > > make: *** [ovirt-node-image.iso] Error 1
>> >> > > [lid@FC16-1 recipe]$ echo $OVIRT_LOCAL_REPO
>> >> > > file:///home/lid/ovirt-cache/ovirt
>> >> > > [lid@FC16-1 recipe]$ ll /home/lid/ovirt-cache/ovirt/ total 12
>> >> > > drwxr-xr-x. 2 lid lid 4096 Feb 9 11:10 noarch drwxrwxr-x. 2
>> >> > > lid lid 4096 Feb 9 11:10 repodata drwxrwxr-x. 2 lid lid 4096
>> >> > > Feb 9
>> >> > > 11:10 src
>> >> >
>> >> > That's a bug in the patch. edit recipe/common-pkgs.ks and remove
>> >> > the last line which is "======="
>> >> >
>> >> > Mike
>> >> > >
>> >> > >
>> >> > > Did make publish store the rpms in $OVIRT_LOCAL_REPO?
>> >> > >
>> >> > > - David
>> >> > > ________________________________________
>> >> > > From: Mike Burns [mburns(a)redhat.com]
>> >> > > Sent: Thursday, February 09, 2012 11:44 AM
>> >> > > To: Li, David
>> >> > > Cc: Perry Myers; users(a)ovirt.org
>> >> > > Subject: RE: [Users] Pxeboot
>> >> > >
>> >> > > On Thu, 2012-02-09 at 11:40 -0800, Li, David wrote:
>> >> > > > The error seems a little stubborn.
>> >> > > >
>> >> > > > [lid@FC16-1 recipe]$ echo $OVIRT_LOCAL_REPO
>> >> > > > file://home/lid/ovirt-cache/ovirt
>> >> > >
>> >> > > You need 3 slashes. file:///home/lid/ovirt-cache/ovirt
>> >> > >
>> >> > > > [lid@FC16-1 recipe]$ make ovirt-node-image.iso ( \
>> >> > > > echo "PRODUCT='"oVirt Node Hypervisor"'" ;\
>> >> > > > echo "PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
>> >> > > > echo "PACKAGE=ovirt-node-image" ;\
>> >> > > > echo "VERSION=2.2.3" ;\
>> >> > > > echo "RELEASE=0.1fc16.git16688ea" ;\
>> >> > > > ) > version.ks
>> >> > > > ./node-creator ovirt-node-image.ks Error creating Live CD :
>> >> > > > Unable to download from repo : Cannot retrieve repository
>> >> > > > metadata (repomd.xml) for repository: local. Please verify
>> >> > > > its path and try again mv ovirt-node-image.iso
>> >> > > > ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
>> >> > > > mv: cannot stat `ovirt-node-image.iso': No such file or
>> >> > > > directory
>> >> > > > make: *** [ovirt-node-image.iso] Error 1
>> >> > > >
>> >> > > > There is also a pop-up window: Unable to open a folder for
>> >> > > > _ovirt-node-imag
>> >> > > >
>> >> > > > maybe it's looking at the wrong place?
>> >> > > >
>> >> > > >
>> >> > > > - David
>> >> > > > ________________________________________
>> >> > > > From: Mike Burns [mburns(a)redhat.com]
>> >> > > > Sent: Thursday, February 09, 2012 11:15 AM
>> >> > > > To: Li, David
>> >> > > > Cc: Perry Myers; users(a)ovirt.org
>> >> > > > Subject: RE: [Users] Pxeboot
>> >> > > >
>> >> > > > On Thu, 2012-02-09 at 10:57 -0800, Li, David wrote:
>> >> > > > > ok, that's my bad:)
>> >> > > > >
>> >> > > > > Ran into error at the last iso build step:
>> >> > > > >
>> >> > > > > Start building ISO image....
>> >> > > > > ( \
>> >> > > > > echo "PRODUCT='"oVirt Node Hypervisor"'" ;\
>> >> > > > > echo "PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
>> >> > > > > echo "PACKAGE=ovirt-node-image" ;\
>> >> > > > > echo "VERSION=2.2.3" ;\
>> >> > > > > echo "RELEASE=0.1.fc16.git16688ea" ;\
>> >> > > > > ) > version.ks
>> >> > > > > ./node-creator ovirt-node-image.ks Error creating Live CD :
>> >> > > > > Unable to download from repo : Cannot retrieve repository
>> >> > > > > metadata (repomd.xml) for repository: local. Please verify
>> >> > > > > its path and try again mv ovirt-node-image.iso
>> >> > > > > ovirt-node-image-2.2.3-0.1.fc16.git16688ea.iso
>> >> > > > > mv: cannot stat `ovirt-node-image.iso': No such file or
>> >> > > > > directory
>> >> > > > > make: *** [ovirt-node-image.iso] Error 1
>> >> > > >
>> >> > > > IIRC, this is usually because you have OVIRT_LOCAL_REPO
>> >> > > > defined, but not correctly. It needs to be like this:
>> >> > > > file:///home/mburns/rpmbuild/RPMS
>> >> > > >
>> >> > > > Ok, I just looked at the Node Building page, and it needs some
>updates.
>> >> > > > Try this from the base directory of the git repo
>> >> > > >
>> >> > > > $ export OVIRT_CACHE_DIR=${HOME}/ovirt-cache
>> >> > > > $ export OVIRT_LOCAL_REPO=file://${OVIRT_CACHE_DIR}/ovirt
>> >> > > > $ ./autogen.sh --with-image-minimizer $ make publish #this
>> >> > > > builds the rpms and puts them in ${OVIRT_CACHE_DIR} $ cd
>> >> > > > recipe $ make ovirt-node-image.iso
>> >> > > >
>> >> > > > Mike
>> >> > > > >
>> >> > > > >
>> >> > > > >
>> >> > > > > I wonder which repo my machine is lacking?
>> >> > > > >
>> >> > > > > - David
>> >> > > > > ________________________________________
>> >> > > > > From: Mike Burns [mburns(a)redhat.com]
>> >> > > > > Sent: Thursday, February 09, 2012 10:02 AM
>> >> > > > > To: Li, David
>> >> > > > > Cc: Perry Myers; users(a)ovirt.org
>> >> > > > > Subject: Re: [Users] Pxeboot
>> >> > > > >
>> >> > > > > On Thu, 2012-02-09 at 09:47 -0800, Li, David wrote:
>> >> > > > > > Got an error:
>> >> > > > > > [lid@FC16-1 ovirt-node]$ git fetch
>> >> > > > > > http://gerrit.ovirt.org/ refs/changes/38/1738/1&&git
>> >> > > > > > cherry-pick FETCH_HEAD
>> >> > > > > > fatal: http://gerrit.ovirt.org/info/refs not found: did
>> >> > > > > > you run git
>> >update-server-info on the server?
>> >> > > > >
>> >> > > > > Bad copy/paste:
>> >> > > > >
>> >> > > > > git fetch http://gerrit.ovirt.org/p/ovirt-node
>> >> > > > > refs/changes/38/1738/1 && git cherry-pick FETCH_HEAD
>> >> > > > > >
>> >> > > > > > any ideas?
>> >> > > > > >
>> >> > > > > > - David
>> >> > > > > > ________________________________________
>> >> > > > > > From: Mike Burns [mburns(a)redhat.com]
>> >> > > > > > Sent: Thursday, February 09, 2012 8:37 AM
>> >> > > > > > To: Li, David
>> >> > > > > > Cc: Perry Myers; users(a)ovirt.org
>> >> > > > > > Subject: Re: [Users] Pxeboot
>> >> > > > > >
>> >> > > > > > On Thu, 2012-02-09 at 08:30 -0800, Li, David wrote:
>> >> > > > > > > Mike,
>> >> > > > > > >
>> >> > > > > > > Two quick questions before I kick off a build:
>> >> > > > > > >
>> >> > > > > > > 1. Git errors. Do they matter?
>> >> > > > > > >
>> >> > > > > > >
>> >> > > > > > > [lid@FC16-1 node-archipel-2.2.2]$ git clone
>> >> > > > > > > http://gerrit.ovirt.org/p/ovirt-node.git
>> >refs/changes/38/1738/1&&git checkout FETCH_HEAD Cloning into
>> >refs/changes/38/1738/1...
>> >> > > > > > > remote: Counting objects: 14791, done
>> >> > > > > > > remote: Finding sources: 100% (14791/14791)
>> >> > > > > > > remote: Total 14791 (delta 10855), reused 14778 (delta
>> >> > > > > > > 10855) Receiving objects: 100% (14791/14791), 16.92 MiB
>> >> > > > > > > | 154
>> >KiB/s, done.
>> >> > > > > > > Resolving deltas: 100% (10855/10855), done.
>> >> > > > > > > fatal: Not a git repository (or any of the parent
>> >> > > > > > > directories): .git
>> >> > > > > >
>> >> > > > > > try this instead:
>> >> > > > > >
>> >> > > > > > git clone http://gerrit.ovirt.org/p/ovirt-node.git
>> >> > > > > > cd ovirt-node
>> >> > > > > > git fetch http://gerrit.ovirt.org/p/ovirt-node
>> >> > > > > > refs/changes/38/1738/1 && git cherry-pick FETCH_HEAD
>> >> > > > > >
>> >> > > > > > >
>> >> > > > > > >
>> >> > > > > > > 2. Build machine.
>> >> > > > > > >
>> >> > > > > > > I am using a x86_64 FC16 VM as the build machine. My
>> >> > > > > > > target is
>> >x86_64 Intel board. Is this ok?
>> >> > > > > >
>> >> > > > > > Should be fine.
>> >> > > > > >
>> >> > > > > > Mike
>> >> > > > > > >
>> >> > > > > > >
>> >> > > > > > >
>> >> > > > > > > - David
>> >> > > > > > > ________________________________________
>> >> > > > > > > From: Mike Burns [mburns(a)redhat.com]
>> >> > > > > > > Sent: Thursday, February 09, 2012 8:16 AM
>> >> > > > > > > To: Li, David
>> >> > > > > > > Cc: Perry Myers; users(a)ovirt.org
>> >> > > > > > > Subject: RE: [Users] Pxeboot
>> >> > > > > > >
>> >> > > > > > > On Thu, 2012-02-09 at 08:10 -0800, Li, David wrote:
>> >> > > > > > > > Not sure where the boot log is since I can't login.
>> >> > > > > > > >
>> >> > > > > > > > I got the source from
>> >> > > > > > > > https://github.com/primalmotion/archipel-node and
>> >> > > > > > > > followed the build instructions in
>> >> > > > > > > > http://ovirt.org/wiki/Node_Building
>> >> > > > > > > >
>> >> > > > > > > > maybe I should rebuild the iso from the ovirt node
>> >> > > > > > > > source tree
>> >as you have pulled in archipel changes yesterday. How do I do that?
>> >> > > > > > >
>> >> > > > > > > git fetch http://gerrit.ovirt.org/p/ovirt-node
>> >> > > > > > > refs/changes/38/1738/1 && git checkout FETCH_HEAD
>> >> > > > > > >
>> >> > > > > > > That command will checkout the current version of the
>> >> > > > > > > archipel-node changes. Then you can just follow the
>> >> > > > > > > Node_Building process. Note that the changes aren't
>> >> > > > > > > merged into master yet. I'm still in the process of reviewing
>them.
>> >> > > > > > >
>> >> > > > > > > Mike
>> >> > > > > > > >
>> >> > > > > > > > - David
>> >> > > > > > > >
>> >> > > > > > > >
>> >> > > > > > > > >-----Original Message-----
>> >> > > > > > > > >From: Mike Burns [mailto:mburns@redhat.com]
>> >> > > > > > > > >Sent: Thursday, February 09, 2012 7:22 AM
>> >> > > > > > > > >To: Li, David
>> >> > > > > > > > >Cc: Perry Myers; users(a)ovirt.org
>> >> > > > > > > > >Subject: Re: [Users] Pxeboot
>> >> > > > > > > > >
>> >> > > > > > > > >On Thu, 2012-02-09 at 07:06 -0800, Li, David wrote:
>> >> > > > > > > > >> Mike,
>> >> > > > > > > > >>
>> >> > > > > > > > >> I added adminpw as a kernel option. After boot, I
>> >> > > > > > > > >> tried
>> >"admin/abc123"
>> >> > > > > > > > >> and "root/abc123" but not able to login.
>> >> > > > > > > > >> Any idea?
>> >> > > > > > > > >>
>> >> > > > > > > > >
>> >> > > > > > > > >Are there any errors in your build or boot logs?
>> >> > > > > > > > >
>> >> > > > > > > > >Mike
>> >> > > > > > > > >
>> >> > > > > > > > >> David
>> >> > > > > > > > >>
>> >> > > > > > > > >>
>> >> > > > > > > > >> >-----Original Message-----
>> >> > > > > > > > >> >From: Mike Burns [mailto:mburns@redhat.com]
>> >> > > > > > > > >> >Sent: Wednesday, February 08, 2012 6:53 PM
>> >> > > > > > > > >> >To: Li, David
>> >> > > > > > > > >> >Cc: Perry Myers; users(a)ovirt.org
>> >> > > > > > > > >> >Subject: Re: [Users] Pxeboot
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >On Wed, 2012-02-08 at 17:11 -0800, Li, David wrote:
>> >> > > > > > > > >> >> Ok, I built an iso out of archipel and
>> >> > > > > > > > >> >> pxebooted it with stateless option. Now
>> >> > > > > > > > >> >I got a "localhost" login prompt. Any idea what
>> >> > > > > > > > >> >should I put
>> >in as user/pwd?
>> >> > > > > > > > >> >> David
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >You will need to pass a password in on the
>> >> > > > > > > > >> >command line as well
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >adminpw=<hashed_password>
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >You can generate the hashed password using:
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >$ openssl passwd
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >Assuming the password was abc123
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >$ openssl passwd abc123
>> >> > > > > > > > >> >tKrQfufCbosr6
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >adminpw=tKrQfufCbosr6
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >Mike
>> >> > > > > > > > >> >
>> >> > > > > > > > >> >>
>> >> > > > > > > > >> >> >-----Original Message-----
>> >> > > > > > > > >> >> >From: Mike Burns [mailto:mburns@redhat.com]
>> >> > > > > > > > >> >> >Sent: Wednesday, February 08, 2012 4:31 PM
>> >> > > > > > > > >> >> >To: Li, David
>> >> > > > > > > > >> >> >Cc: Perry Myers; users(a)ovirt.org
>> >> > > > > > > > >> >> >Subject: RE: [Users] Pxeboot
>> >> > > > > > > > >> >> >
>> >> > > > > > > > >> >> >On Wed, 2012-02-08 at 15:43 -0800, Li, David wrote:
>> >> > > > > > > > >> >> >> Ok, I think we are on the same page now
>> >> > > > > > > > >> >> >> regarding
>> >stateless node.
>> >> > > > > > > > >> >> >> It looks like the achipel diff you just
>> >> > > > > > > > >> >> >> pulled in might be able to do this. But I
>> >> > > > > > > > >> >> >> can't quite make it out what the kernel
>> >> > > > > > > > >> >> >> option should
>> >> > > > > > > > >be.
>> >> > > > > > > > >> >> >> Is it "stateless=1"?
>> >> > > > > > > > >> >> >>
>> >> > > > > > > > >> >> >
>> >> > > > > > > > >> >> >stateless=1 or just stateless, both will work.
>> >> > > > > > > > >> >> >
>> >> > > > > > > > >> >> >
>> >> > > > > > > > >> >> >> David
>> >> > > > > > > > >> >> >>
>> >> > > > > > > > >> >> >> >-----Original Message-----
>> >> > > > > > > > >> >> >> >From: Mike Burns [mailto:mburns@redhat.com]
>> >> > > > > > > > >> >> >> >Sent: Wednesday, February 08, 2012 3:27 PM
>> >> > > > > > > > >> >> >> >To: Li, David
>> >> > > > > > > > >> >> >> >Cc: Perry Myers; users(a)ovirt.org
>> >> > > > > > > > >> >> >> >Subject: Re: [Users] Pxeboot
>> >> > > > > > > > >> >> >> >
>> >> > > > > > > > >> >> >> >On Wed, 2012-02-08 at 15:19 -0800, Li, David
>wrote:
>> >> > > > > > > > >> >> >> >> Perry,
>> >> > > > > > > > >> >> >> >>
>> >> > > > > > > > >> >> >> >> I am glad you brought this up.
>> >> > > > > > > > >> >> >> >> I 'd be perfectly happy to run the root
>> >> > > > > > > > >> >> >> >> fs entirely in
>> >RAM.
>> >> > > > > > > > >> >> >> >> In fact that would
>> >> > > > > > > > >> >> >> >be ideal for me. It's just I am not quite
>> >> > > > > > > > >> >> >> >sure how to use pxeboot to achieve this.
>> >> > > > > > > > >> >> >> >>
>> >> > > > > > > > >> >> >> >> I am doing a test now using the tftpboot
>> >> > > > > > > > >> >> >> >> files
>> >created from the iso.
>> >> > > > > > > > >> >> >> >> As far as I see, the kernel boot options
>> >(pxelinux.cfg/default) has:
>> >> > > > > > > > >> >> >> >>
>> >> > > > > > > > >> >> >> >> root=live:/ovirt-node-image-2.2.2-1.1.fc1
>> >> > > > > > > > >> >> >> >> 6.i
>> >> > > > > > > > >> >> >> >> so
>> >> > > > > > > > >> >> >> >>
>> >> > > > > > > > >> >> >> >> With this I can only pxeboot to the
>> >> > > > > > > > >> >> >> >> intall screen. What should I use to let
>> >> > > > > > > > >> >> >> >> the
>> >> > > > > > > > >> >> >> >kernel mount the root fs in memory?
>> >> > > > > > > > >> >> >> >Something like
>> >> > > > > > > > >root=/dev/ram0?
>> >> > > > > > > > >> >> >> >>
>> >> > > > > > > > >> >> >> >> David
>> >> > > > > > > > >> >> >> >
>> >> > > > > > > > >> >> >> >It's not currently possible with ovirt-node.
>> >> > > > > > > > >> >> >> >That's the whole stateless feature that we
>> >> > > > > > > > >> >> >> >outlined. Once we actually have it
>> >> > > > > > > > >> >> >> >implemented, it will be something along the
>> >> > > > > > > > >> >> >> >lines of adding "stateless" to
>> >> > > > > > > > >> >> >the kernel commandline.
>> >> > > > > > > > >> >> >> >
>> >> > > > > > > > >> >> >> >Mike
>> >> > > > > > > > >> >> >> >>
>> >> > > > > > > > >> >> >> >>
>> >> > > > > > > > >> >> >> >> >-----Original Message-----
>> >> > > > > > > > >> >> >> >> >From: Perry Myers
>> >> > > > > > > > >> >> >> >> >[mailto:pmyers@redhat.com]
>> >> > > > > > > > >> >> >> >> >Sent: Wednesday, February 08, 2012 2:54
>> >> > > > > > > > >> >> >> >> >PM
>> >> > > > > > > > >> >> >> >> >To: Mike Burns
>> >> > > > > > > > >> >> >> >> >Cc: Li, David; users(a)ovirt.org
>> >> > > > > > > > >> >> >> >> >Subject: Re: [Users] Pxeboot
>> >> > > > > > > > >> >> >> >> >
>> >> > > > > > > > >> >> >> >> >On 02/08/2012 05:03 PM, Mike Burns wrote:
>> >> > > > > > > > >> >> >> >> >> On Wed, 2012-02-08 at 13:46 -0800, Li,
>> >> > > > > > > > >> >> >> >> >> David
>> >wrote:
>> >> > > > > > > > >> >> >> >> >>> Mike,
>> >> > > > > > > > >> >> >> >> >>>
>> >> > > > > > > > >> >> >> >> >>> If I understand this correctly, today
>> >> > > > > > > > >> >> >> >> >>> I should be able to pxeboot and nfs
>> >> > > > > > > > >> >> >> >> >>> mount the
>> >root fs from a remote server.
>> >> > > > > > > > >> >> >> >> >>> Apart from setting up the pxe stuff,
>> >> > > > > > > > >> >> >> >> >>> I 'd have to populate the ovirt node
>> >> > > > > > > > >> >> >> >> >>> root fs on the server
>> >> > > > > > > > >> >> >> >> >>> - perhaps steal it from a disk install.
>> >> > > > > > > > >> >> >> >> >>> In other words I am concerned about
>> >> > > > > > > > >> >> >> >> >>> the point from which the kernel
>> >> > > > > > > > >> >> >> >> >>> starts to execute /init script (in
>> >> > > > > > > > >> >> >> >> >>> the initramfs) to the
>> >point /init is able to mount the final root fs from a remote server.
>> >> > > > > > > > >> >> >> >> >>
>> >> > > > > > > > >> >> >> >> >> No, there is no way to set this up
>> >> > > > > > > > >> >> >> >> >> currently in
>> >ovirt-node.
>> >> > > > > > > > >> >> >> >> >> You could install using a remote iscsi
>> >> > > > > > > > >> >> >> >> >> lun if you have a hardware iscsi HBA,
>> >> > > > > > > > >> >> >> >> >> but there isn't a way to mount a
>> >> > > > > > > > >> >> >> >> >> remote nfs share as the
>> >> > > > > > > > >> >> >root fs.
>> >> > > > > > > > >> >> >> >> >>
>> >> > > > > > > > >> >> >> >> >> Supporting a remote NFS share as the
>> >> > > > > > > > >> >> >> >> >> root fs isn't even something that
>> >> > > > > > > > >> >> >> >> >> requested as an RFE at this point or
>> >> > > > > > > > >> >> >> >> >> on the roadmap as far as
>> >I'm aware.
>> >> > > > > > > > >> >> >> >> >>
>> >> > > > > > > > >> >> >> >> >> It sounds like what you're really
>> >> > > > > > > > >> >> >> >> >> looking for is a shared root fs that
>> >> > > > > > > > >> >> >> >> >> multiple hosts could use. This is
>> >> > > > > > > > >> >> >> >> >> something that we will probably look
>> >> > > > > > > > >> >> >> >> >> into eventually, but it's not on the
>> >> > > > > > > > >> >> >> >> >> immediate
>> >> > > > > > > > >> >> >roadmap.
>> >> > > > > > > > >> >> >> >> >
>> >> > > > > > > > >> >> >> >> >Given that the rootfs of oVirt Node is
>> >> > > > > > > > >> >> >> >> >fairly small and in a truly stateless
>> >> > > > > > > > >> >> >> >> >environment would just run out of system
>> >> > > > > > > > >> >> >> >> >RAM, there's no real reason to try to do
>> >> > > > > > > > >> >> >> >> >a shared NFS based
>> >> > > > > > > > >rootfs.
>> >> > > > > > > > >> >> >> >> >It's an unnecessary complication I
>> >> > > > > > > > >> >> >> >> >think, if the end goal is to move to
>> >> > > > > > > > >> >> >> >> >truly
>> >> > > > > > > > >> >> >> >stateless.
>> >> > > > > > > > >> >> >> >> >
>> >> > > > > > > > >> >> >> >> >For larger systems where the rootfs is
>> >> > > > > > > > >> >> >> >> >on the order of GB's, shared root may
>> >> > > > > > > > >> >> >> >> >make more
>> >sense.
>> >> > > > > > > > >> >> >> >>
>> >____________________________________________
>> >> > > > > > > > >> >> >> >> ___ Users mailing list Users(a)ovirt.org
>> >> > > > > > > > >> >> >> >> http://lists.ovirt.org/mailman/listinfo/u
>> >> > > > > > > > >> >> >> >> ser
>> >> > > > > > > > >> >> >> >> s
>> >> > > > > > > > >> >> >> >
>> >> > > > > > > > >> >> >>
>> >> > > > > > > > >> >> >
>> >> > > > > > > > >> >>
>> >> > > > > > > > >> >>
>> >_______________________________________________
>> >> > > > > > > > >> >> Users mailing list Users(a)ovirt.org
>> >> > > > > > > > >> >> http://lists.ovirt.org/mailman/listinfo/users
>> >> > > > > > > > >> >
>> >> > > > > > > > >>
>> >> > > > > > > > >>
>> >_______________________________________________
>> >> > > > > > > > >> Users mailing list Users(a)ovirt.org
>> >> > > > > > > > >> http://lists.ovirt.org/mailman/listinfo/users
>> >> > > > > > > > >
>> >> > > > > > > >
>> >> > > > > > >
>> >> > > > > > >
>> >> > > > > > > _______________________________________________
>> >> > > > > > > Users mailing list
>> >> > > > > > > Users(a)ovirt.org
>> >> > > > > > > http://lists.ovirt.org/mailman/listinfo/users
>> >> > > > > >
>> >> > > > > >
>> >> > > > > > _______________________________________________
>> >> > > > > > Users mailing list
>> >> > > > > > Users(a)ovirt.org
>> >> > > > > > http://lists.ovirt.org/mailman/listinfo/users
>> >> > > > >
>> >> > > > >
>> >> > > >
>> >> > > >
>> >> > >
>> >> > >
>> >> > > _______________________________________________
>> >> > > Users mailing list
>> >> > > Users(a)ovirt.org
>> >> > > http://lists.ovirt.org/mailman/listinfo/users
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Users mailing list
>> >> > Users(a)ovirt.org
>> >> > http://lists.ovirt.org/mailman/listinfo/users
>> >>
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users(a)ovirt.org
>> >> http://lists.ovirt.org/mailman/listinfo/users
>> >
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
13 years, 1 month
[Users] Difference between RHEV and ovirt
by patrick
Hello all,
In our company we want to use either RHEV or oVirt in a production
environment. After testing RHEV for 30 days we are happy with the
stability and features. Can someone explain the difference between
RHEV and oVirt? Are there maybe some features just available in RHEV
like Windows guest drivers or someting like that?
I'm not sure if I get this right, but as oVirt is the upstream of RHEV
does this means that new features like hot add nic etc. are first
available in oVirt and afterwards in RHEV. Does oVirt has any
drawbacks compared to RHEV other than support?
Thanks in advance
Patrick van der Wiel
13 years, 1 month
[Users] Problem with required packages when installing ovirt-engine
by Terry Phelps
I'm new here, and am trying to install ovirt-engine, as documented on
ovirt.org/get-ovirt, and in the installation guide. I've worked with
RPM-based distributions (RHEL, Centos, Scientific Linux) for quite a
while, but have never worked with Fedora.
Please tell me what I'm doing wrong, or failing to do:
I am trying to install ovirt-engine on a newly-built Scientific Linux
6.1 (just like RHEL 6.1) machine. I did the "wget
...ovirt-engine.repo", and removed the classpathx-jaf RPM.
Then I tried to "yum install ovirt-engine", and got a number of errors:
Error: Package: ovirt-engine-tools-common-3.0.0_0001-1.6.fc16.x86_64
(ovirt-engine-stable)
Requires: jakarta-commons-jxpath
Error: Package: ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64
(ovirt-engine-stable)
Requires: python(abi) = 2.7
Installed: python-2.6.6-20.el6.x86_64
(@anaconda-ScientificLinux-201107271550.x86_64)
python(abi) = 2.6
Error: Package: ovirt-engine-tools-common-3.0.0_0001-1.6.fc16.x86_64
(ovirt-engine-stable)
Requires: jakarta-commons-configuration
Error: Package: ovirt-engine-jboss-deps-3.0.0_0001-1.6.fc16.x86_64
(ovirt-engine-stable)
Requires: hsqldb >= 1:1.8.0.10-9
Installed: 1:hsqldb-1.8.0.10-8.el6.x86_64
(@anaconda-ScientificLinux-201107271550.x86_64)
hsqldb = 1:1.8.0.10-8.el6
Error: Package: ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 (ovirt-engine-stable)
Requires: libc.so.6(GLIBC_2.14)(64bit)
Error: Package: ovirt-engine-jboss-deps-3.0.0_0001-1.6.fc16.x86_64
(ovirt-engine-stable)
Requires: jakarta-commons-discovery >= 1:0.4-7
Installed: 1:jakarta-commons-discovery-0.4-5.4.el6.noarch
(@anaconda-ScientificLinux-201107271550.x86_64)
I'm suppose this means that I need newer versions of some packages
that are installed now, and these are not available in a yum repo that
my yum can see. The only change to the installed yum environment I
have made is to add the ovirt-engine repo. I don't see anything in the
docs about pointing to some Fedora repo, or some such thing, but
perhaps that's what I need to do.
Can someone please enlighten me?
13 years, 1 month
[Users] Ovirt Support life (timeframe) - upgrade path ?
by Morgan Cox
Hi.
As Fedora the default system that Ovirt is packaged for does this mean that
Ovirt will have the same (short) support life of 18 months ? I ask as that
is a bit short to have in enterprise ..
I.e if I install Ovirt in Fedora 16 will support life run out when Fedora
16 runs out or will I be able to upgrade Ovirt/Fedora to the next version?
Are there going packages for Centos ? If so will they be supported longer ?
If this information is out there already can you point me to the right
direction ?
Regards
13 years, 1 month
[Users] Unable to add ISOs to default ISO storage domain
by Andrew Dunlop
I have been trying to upload ISOs onto my ISO Storage Domain, set up
when I ran engine-setup.
I can run the command and the .iso file is correctly put in place,
however this never appears in the available images for this domain on
the web-admin.
I notice that there are no file entries in
https://xxxx.xxxx.co.uk:8443/api/storagedomains/a677acff-601b-4b6d-86ce-0...
just what is given in the verbose output from the uploader.
Any ideas what the problem might be? I have tried a couple of ISOs and
have also done a cleanup and setup.
Below is the verbose output from the uploader:
[admin@xxxx ~]$ sudo engine-iso-uploader -v -f -i ISOs upload
Downloads/TinyCore-current.iso
[sudo] password for admin:
Please provide the REST API password for the admin@internal oVirt
Engine user (CTRL+D to abort):
DEBUG: URL is https://xxxx.xxxx.co.uk:8443/api/storagedomains?search=name%3DISOs
DEBUG: Returned XML is
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<storage_domains>
<storage_domain
href="/api/storagedomains/a677acff-601b-4b6d-86ce-0798f3833629"
id="a677acff-601b-4b6d-86ce-0798f3833629">
<name>ISOs</name>
<link href="/api/storagedomains/a677acff-601b-4b6d-86ce-0798f3833629/permissions"
rel="permissions"/>
<link href="/api/storagedomains/a677acff-601b-4b6d-86ce-0798f3833629/files"
rel="files"/>
<type>iso</type>
<master>false</master>
<storage>
<type>nfs</type>srmr
<address>xxxx.xxxx.co.uk</address>
<path>/isos</path>
</storage>users@
<available>48318382080</available>
<used>4294967296</used>
<committed>0</committed>
<storage_format>v1</storage_format>
</storage_domain>
</storage_domains>
DEBUG: id=a677acff-601b-4b6d-86ce-0798f3833629 address=xxxx.xxxx.co.uk
path=/isos
DEBUG: local NFS mount point is /tmp/tmpX03eVj
DEBUG: NFS mount command (/bin/mount -t nfs -o rw,sync,soft
xxxx.xxxx.co.uk:/isos /tmp/tmpX03eVj)
DEBUG: /bin/mount -t nfs -o rw,sync,soft xxxx.xxxx.co.uk:/isos /tmp/tmpX03eVj
DEBUG: _cmds(['/bin/mount', '-t', 'nfs', '-o', 'rw,sync,soft',
'xxxx.xxxx.co.uk:/isos', '/tmp/tmpX03eVj'])
DEBUG: returncode(0)
DEBUG: STDOUT()
DEBUG: STDERR()
DEBUG: Size of Downloads/TinyCore-current.iso: 12507136 bytes 12214.0
1K-blocks 11.0 MB
DEBUG: Available space in
/tmp/tmpX03eVj/a677acff-601b-4b6d-86ce-0798f3833629/images/11111111-1111-1111-1111-111111111111: 48557457408
bytes 47419392.0 1K-blocks 46308.0 MB
DEBUG: euid(0) egid(0)
DEBUG: euid(0) egid(0)
DEBUG: URL is https://xxxx.xxxx.co.uk:8443/api/storagedomains/a677acff-601b-4b6d-86ce-0...
DEBUG: Returned XML is
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<files/>
DEBUG: /bin/umount -t nfs -f /tmp/tmpX03eVj
DEBUG: /bin/umount -t nfs -f /tmp/tmpX03eVj
DEBUG: _cmds(['/bin/umount', '-t', 'nfs', '-f', '/tmp/tmpX03eVj'])
DEBUG: returncode(0)
DEBUG: STDOUT()
DEBUG: STDERR()
13 years, 1 month
[Users] Gluster Compatibility
by Barry French
Hi,
Is oVirt able to use glusterfs to access gluster shares. I know
gluster can export NFS shares but using the glusterfs client provides
redundancy over all gluster brick ip's, whereas standard NFS does not.
Thanks.
13 years, 1 month
[Users] Pxeboot
by Li, David
--_000_A0D5581BE022624487D06FF31DA39EAC46DC084BEBcsmailcloudsh_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Since oVirt node doesn't support pxeboot in the current release, does anyo=
ne know if I can use RHEV-H to pxeboot and nfs mout the rootfs?
David
--_000_A0D5581BE022624487D06FF31DA39EAC46DC084BEBcsmailcloudsh_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Type content=
=3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros=
oft Word 14 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:SimSun;
panose-1:2 1 6 0 3 1 1 1 1 1;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:"\@SimSun";
panose-1:2 1 6 0 3 1 1 1 1 1;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DEN-US link=3Dblue vli=
nk=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal>Since oVirt node=
doesn’t support pxeboot in the current release, does anyone kn=
ow if I can use RHEV-H to pxeboot and nfs mout the rootfs?<o:p></o:p></p><p=
class=3DMsoNormal>David<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:=
p></p></div></body></html>=
--_000_A0D5581BE022624487D06FF31DA39EAC46DC084BEBcsmailcloudsh_--
13 years, 1 month
