August 2012 - Users - oVirt List Archives

[Users] Issue setting IP information for Non-VM networks
by Trey Dockendorf 09 Aug '12

09 Aug '12

A few weeks back I started a discussion about my issues with IP/Netmask not being set on networks that weren't enabled for VM use. The bug is here, https://bugzilla.redhat.com/show_bug.cgi?id=834205. I've since upgrade to latest ovirt / vdsm and while the issue seems to be resolved it's now failing in a different way. Looking at the logs , it looks like the correct parameters are being passed to vdsm but the ifcfg-eth* is still left with no IPADDR or NETMASK values. Attached are logs from when Assigning a Static IP to both eth0 / ovirtmgmt and eth1/stor0. CentOS 6.3 on the Engine host with the following versions ovirt-engine-cli-3.1.0.2-1alpha.el6.noarch ovirt-engine-webadmin-portal-3.1.0-3.16.el6.noarch ovirt-engine-notification-service-3.1.0-3.16.el6.noarch ovirt-iso-uploader-3.1.0-16.el6.noarch ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch ovirt-engine-restapi-3.1.0-3.16.el6.noarch ovirt-engine-backend-3.1.0-3.16.el6.noarch ovirt-engine-userportal-3.1.0-3.16.el6.noarch ovirt-engine-tools-common-3.1.0-3.16.el6.noarch ovirt-engine-dbscripts-3.1.0-3.16.el6.noarch ovirt-engine-3.1.0-3.16.el6.noarch ovirt-log-collector-3.1.0-16.el6.noarch ovirt-engine-jbossas711-1-0.x86_64 ovirt-engine-setup-3.1.0-3.16.el6.noarch ovirt-engine-config-3.1.0-3.16.el6.noarch ovirt-engine-genericapi-3.1.0-3.16.el6.noarch ovirt-image-uploader-3.1.0-16.el6.noarch CentOS 6.3 on the Node with the following versions vdsm-xmlrpc-4.10.0-0.42.12.el6.noarch vdsm-python-4.10.0-0.42.12.el6.x86_64 vdsm-cli-4.10.0-0.42.12.el6.noarch vdsm-hook-simpleqemu-0.1-1.el6.noarch vdsm-4.10.0-0.42.12.el6.x86_64 After performing the change in the web interface, this is ifcfg-eth1 (missing IPADDR and NETMASK) # cat ifcfg-eth1 DEVICE=eth1 ONBOOT=yes BOOTPROTO=none HWADDR=00:25:90:4c:91:bf NM_CONTROLLED=no MTU=9000 I've also run into an issue where in the web interface, the ovirtmgmt network always reverts back to DHCP as the boot protocol. The ifcfg on node will reflect the correct setting after I change to static, but if I go to re-edit the entry, it's back on DHCP. Thanks - Trey

5 5

[Users] ovirt 3.1 rpm setup
by Johan Kragsterman 09 Aug '12

09 Aug '12

Hi! Fc17/ovirt 3.1, following the instructions on ovirt site how to install from rpm stable. My engine-setup fails with cannot this create db error: Installing:Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ]Creating Database... [ ERROR ]Database creation failedPlease check log file /var/log/ovirt-engine/engine-setup_2012_08_09_15_58_06.log for more information [johan@engine ~]$ Here is the corresponding part of the log: File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run function() File "/bin/engine-setup", line 953, in _createDB output, rc = utils.execCmd(cmd, None, True, output_messages.ERR_DB_CREATE_FAILED, masked_value_set) File "/usr/share/ovirt-engine/scripts/common_utils.py", line 340, in execCmd raise Exception(msg)Exception: Database creation failed Anyone have a clue?. Rgrds Johan

1 0

[Users] Cannot connect to guest with spice console; SSL validate error
by Karli Sjöberg 09 Aug '12

09 Aug '12

Hi, I seems very difficult to get this working. I have a Fedora 17 client, installed spice-xpi and tried to access console from User Portal but console never shows up. engine.log prints: 2012-08-07 15:56:18,738 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (ajp--0.0.0.0-8009-13) [2a8bc3f4] Running command: SetVmTicketCommand internal: false. Entities affected : ID: 2ad22641-7aeb-4d1b-999e-2c0563376641 Type: VM 2012-08-07 15:56:18,771 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--0.0.0.0-8009-13) [2a8bc3f4] START, SetVmTicketVDSCommand(vdsId = acfc94c0-d7e1-11e1-b35e-b38016c320bb, vmId=2ad22641-7aeb-4d1b-999e-2c0563376641, ticket=NvbcLbRR/7Vx, validTime=120,m userName=karli, userId=de526322-d046-4a06-911e-546e7159556e), log id: 3d61fa94 2012-08-07 15:56:18,816 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--0.0.0.0-8009-13) [2a8bc3f4] FINISH, SetVmTicketVDSCommand, log id: 3d61fa94 >From the F17 client with "ovirt-shell" installed from ovirt-3.1 repo: $ console milli (window briefly flashes and disappeares again) warning: could not fetch host certificate info cause used backend/sdk does not support it. warning: host identity will not be validated. And have also used "spicec" directly from F17 client: # spicec -h cirrus2-1.slu.se -p 5900 -s 5901 -w v36BkUumraDG (The first ticket had by this time expired, so this is a new one) (flashes) Error: failed to connect w/SSL, ssl_error error:00000001:lib(0):func(0):reason(1) 140059992839392:error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed:s3_clnt.c:1063: Warning: SSL Error: # spicec -h cirrus2-1.slu.se -p 5900 -w v36BkUumraDG (flashes) Warning: connect error 5 - need secured connection # rpm -qa | egrep '(ovirt|vdsm)' ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch vdsm-cli-4.10.0-5.fc17.noarch ovirt-engine-config-3.1.0-1.fc17.noarch ovirt-engine-userportal-3.1.0-1.fc17.noarch vdsm-4.10.0-5.fc17.x86_64 ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch ovirt-engine-sdk-3.1.0.4-1.fc17.noarch ovirt-engine-restapi-3.1.0-1.fc17.noarch ovirt-engine-backend-3.1.0-1.fc17.noarch ovirt-engine-3.1.0-1.fc17.noarch ovirt-engine-webadmin-portal-3.1.0-1.fc17.noarch ovirt-engine-notification-service-3.1.0-1.fc17.noarch ovirt-engine-dbscripts-3.1.0-1.fc17.noarch vdsm-python-4.10.0-5.fc17.x86_64 ovirt-engine-genericapi-3.1.0-1.fc17.noarch ovirt-engine-tools-common-3.1.0-1.fc17.noarch ovirt-engine-cli-3.1.0.6-1.fc17.noarch vdsm-xmlrpc-4.10.0-5.fc17.noarch vdsm-bootstrap-4.10.0-5.fc17.noarch ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch ovirt-engine-setup-3.1.0-1.fc17.noarch The engine is installed with SSL as enabled by default, the hosts too. VDSM and libvirt are all active and validate fine towards the engine; have status "UP" and so on, but can't get SPICE console working. VNC works of course, but SPICE would be much cooler:) How do I get console working with SPICE? Best Regards Karli Sjöberg

4 4

[Users] help with a presentation
by Rino Rondan 08 Aug '12

08 Aug '12

Hi I want to know if you have a demo of a configured ovirt system because I will be on this event http://www.fcad.uner.edu.ar/destacadas/x-jornadas-nacionales-de-administrac… , and I need to show ovirt as open-source implementation . Regards -- --- Rondan Rino* * Ambassador Fedora :*https://fedoraproject.org/wiki/User:Villadalmine*

3 8

[Users] Looking for an additional Release Manager for the oVirt Project
by Mike Burns 08 Aug '12

08 Aug '12

Hi all, We are currently looking for someone who is willing to fill the role of Release Manager for the oVirt Project. Our current Release Manager, Ofer Schreiber, is going to be away for ~7 weeks and we need someone to fill the role during that time, and to share the role after he returns. Ofer is preparing a wiki page detailing the role and responsibilities. If you are willing to help out or want to nominate someone for the role, please let us know. Thanks Mike

1 0

[Users] ANNOUNCE: oVirt 3.1 Release
by Ofer Schreiber 08 Aug '12

08 Aug '12

The oVirt Project's second official release, version 3.1, ships with a set of storage, interface and infrastructure enhancements that narrow the gaps between the open source virtualization platform and proprietary alternatives. oVirt 3.1 adds support for capturing and cloning from live snapshots, for virtual disk and network adapter hot plugging, and for connecting externally-hosted LUNs to oVirt virtual machines. The oVirt 3.1 web administration console also includes new interfaces for managing floating virtual disks and for configuring Gluster storage volumes. In the 3.1 release, Red Hat Directory Server and IBM Tivoli Directory Server join IPA and Active Directory as supported identity providers, which administrators may pair with initial support for user-based resource quota capabilities. For more information on oVirt 3.1, including installation instructions, please see the release notes at http://wiki.ovirt.org/wiki/OVirt_3.1_release_notes . The new release is avilable for download at http://www.ovirt.org/get-ovirt/ For the entire oVirt community, thanks for your participation in making this release happen. In particular, thanks to anyone who contributed to the release through testing, submitting patches, and bug reporting. Ofer Schreiber oVirt release manager, on behalf of the oVirt team.

1 0

[Users] oVirt Weekly Meeting Minutes -- 2012-08-08
by Mike Burns 08 Aug '12

08 Aug '12

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-08-08-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-08-08-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-08-08-14.00.log.html ============================ #ovirt: oVirt Weekly Meeting ============================ Meeting started by mburns at 14:00:15 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-08-08-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:23) * Release (mburns, 14:02:35) * LINK: http://wiki.ovirt.org/wiki/OVirt_3.1_release_notes (sgordon, 14:05:00) * ovirt-node is ready, no new issues discovered. (oschreib, 14:07:07) * same goes for docs (oschreib, 14:07:14) * build is ready (oschreib, 14:07:25) * ovirt-node is ready, no new issues discovered. (mburns, 14:08:10) * same goes for docs (mburns, 14:08:17) * build is ready (mburns, 14:08:26) * Release Vote (mburns, 14:08:35) * AGREED: release is ready (mburns, 14:12:08) * Workshops (mburns, 14:19:16) * LC NA is at 78 out of 100 attendees (mburns, 14:20:24) * schedule is set (mburns, 14:20:27) * speakers: acathrow mburns abaron_ jb_netapp (mburns, 14:21:06) * no CFP for Bangalore event in October, but volunteers wanted (mburns, 14:21:45) * CFP for oVirt + KVM Forum is under review, will go out shortly (mburns, 14:22:10) * project status -- infra (mburns, 14:23:20) * Jenkins per patch review has been started, some bogs still to work out but working (quaid, 14:26:29) * Team is looking for additional hosts/hosting solutions, if your organization has something we can use (quaid, 14:27:25) * Jenkins nightly builds are working and copying results to ovirt.org (quaid, 14:28:16) * We're working on using Puppet/Foreman for managing all the systems Infra now has (quaid, 14:28:37) * Wiki now has ConfirmAccount extension enabled, which allows people to self-register in to an approval queue the Bureaucrats can approve; working on how-to content & checking that other account creation paths are now fixed (quaid, 14:29:25) * we're looking in to package signing for after the 3.1 release; more on that on arch@ coming soon-ish (quaid, 14:30:23) * we're improving the Infra documentation, including a matrix of who manages what - we'll put that on the main [[Infrastructure]] page to help people when troubleshooting (quaid, 14:31:19) * backup release manager (mburns, 14:32:15) * need a replacement for ~7 weeks and filling in backup role going forward (mburns, 14:40:15) * looking for volunteers and/or nominations (mburns, 14:40:26) * no volunteers in this meeting (mburns, 14:40:52) * will raise on arch@ looking for volunteers (mburns, 14:41:06) * mburns will fill in short term, but will step aside if someone else volunteers (mburns, 14:41:36) * RobertM will help out/shadow to learn the ropes (mburns, 14:42:27) * ACTION: mburns to send out message to arch@ looking for volunteers for backup release manager (mburns, 14:43:25) * ACTION: oschreib to update a wiki page with Release Manager Role and Responsibilities (mburns, 14:43:40) * Other topics (mburns, 14:44:00) Meeting ended at 14:49:48 UTC. Action Items ------------ * mburns to send out message to arch@ looking for volunteers for backup release manager * oschreib to update a wiki page with Release Manager Role and Responsibilities Action Items, by person ----------------------- * mburns * mburns to send out message to arch@ looking for volunteers for backup release manager * oschreib * oschreib to update a wiki page with Release Manager Role and Responsibilities * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (77) * oschreib (46) * quaid (16) * RobertM (10) * lh (10) * sgordon (8) * ovirtbot (6) * jbrooks (5) * cctrieloff (4) * jb_netapp (3) * rickyh (1) * dougsland (1) * garrett_ (1) * ofrenkel (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

1 0

[Users] spicec not connect | SSL Error
by Artem 08 Aug '12

08 Aug '12

Hi all, spicec connected to virtual machines on Ovirt web console... but manual connect this (on windows or linux) 1344197680 INFO [3001:3002] RedPeer::connect_unsecure: Connected to 192.168.0.3 5900 1344197680 INFO [3001:3002] RedPeer::connect_secure: Connected to 192.168.0.3 5901 1344197680 ERROR [3001:3002] RedPeer::verify_subject: subject mismatch: #entries cert=2, input=3 1344197680 ERROR [3001:3002] RedPeer::connect_secure: failed to connect w/SSL, ssl_error error:00000001:lib(0):func(0):reason(1) 1344197680 WARN [3001:3002] RedChannel::run: SSL Error: 1344197680 INFO [3001:3001] main: Spice client terminated (exitcode = 7) what can be done about it ?

3 25

[Users] Add host fails with missing cpuFlag 'vmx'.
by snmishra＠linux.vnet.ibm.com 08 Aug '12

08 Aug '12

Hi, Upadted from ovirt-engine 3.1.0-1.fc17 to 3.1.0-2.fc17. Now, when I add hosts, it fails with missing cpuFlags "vmx". New host is running -- vdsm 4.10.0-6.fc17 qemu-kvm-1.0-18.fc17. and the output of vdsClient -s 0 getVdsCaps is - clusterLevels = ['3.0', '3.1'] cpuCores = 1 cpuFlags = fpu,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pse36,c lflush,mmx,fxsr,sse,sse2,syscall,nx,lm,up,nopl,pni,cx16,hypervisor,lahf_lm cpuModel = QEMU Virtual CPU version (cpu64-rhel6) cpuSockets = 1 cpuSpeed = 1999.980 emulatedMachines = ['pc-0.15', 'pc-1.0', 'pc', 'pc-0.14', 'pc-0.13', 'pc -0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = false lastClient = 192.168.68.235 lastClientIface = ovirtmgmt management_ip = memSize = 7987 netConfigDirty = False On the older host (which was working, I had) - qemu-kvm-1.0-17.fc17 vdsm-4.10.0-5.fc17 and its output of vdsClient -s 0 getVdsCaps is - clusterLevels = ['3.0', '3.1'] cpuCores = 1 cpuFlags = pge,clflush,syscall,tsc,vmx,cmov,fpu,lm,msr,nx,fxsr,pae,nopl,mmx,cx8,mce,de,mca,pse,pni,apic,sse,lahf_lm,sse2,hypervisor,up,cx16,pse36,mtrrmodel_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Opteron_G1 cpuModel = Intel(Fake) CPU cpuSockets = 1 cpuSpeed = 1999.980 emulatedMachines = ['pc-0.15', 'pc-1.0', 'pc', 'pc-0.14', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 Is this a new issue? Should we open a BZ? -Sharad

3 5

[Users] sanlock issues
by Jacob Wyatt 07 Aug '12

07 Aug '12

Solved with a hack. oVirt Node Hypervisor release 2.5.0 (2.0.fc17) Couldn't start a VM because sanlock wasn't running. Sanlock wasn't running because wdmd wasn't running. wdmd was running because softdog kernel module wasn't loaded. As I didn't know of another way of making the change persistent I edited /config/usr/sbin/ifup and added "/sbin/modprobe softdog" to the top of the script. I really think it would be a good idea for the oVirt Node team to add in some persistent script files that are run at various points in the boot process so that people like me can add in hacks where needed to make it work.

2 1

[Users] share nfs export volume
by Jacob Wyatt 07 Aug '12

07 Aug '12

Anyone know if I can share an nfs export volume between two discrete ovirt installations? I'm migrating VMs from a 3.0 install to a 3.1 install and wondered if I could have the same export domain connected both that the same time? Just curious. -Jacob

2 1

[Users] VB: Cannot connect to guest with spice console; SSL validate error
by Karli Sjöberg 07 Aug '12

07 Aug '12

________________________________________ Från: Karli Sjöberg Skickat: den 7 augusti 2012 16:19 Till: Jacob Wyatt Ämne: Re: [Users] Cannot connect to guest with spice console; SSL validate error Skickat från min iPhone 7 aug 2012 kl. 16:14 skrev "Jacob Wyatt" <jwyatt(a)ggc.edu>: > I don't know if this is the same issue but for some reason my CA cert for spice was a blank file. I copied another one from the vdsm directory (mostly guessing) and it worked. > > cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-spice/ca-cert. Wasn't that, sadly. I diffed them and they are the same. Thanks any way. > > ________________________________________ > From: users-bounces(a)ovirt.org [users-bounces(a)ovirt.org] on behalf of Karli Sjöberg [Karli.Sjoberg(a)slu.se] > Sent: Tuesday, August 07, 2012 10:10 AM > To: users(a)oVirt.org > Subject: [Users] Cannot connect to guest with spice console; SSL validate error > > Hi, > > I seems very difficult to get this working. I have a Fedora 17 client, installed spice-xpi and tried to access console from User Portal but console never shows up. engine.log prints: > 2012-08-07 15:56:18,738 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (ajp--0.0.0.0-8009-13) [2a8bc3f4] Running command: SetVmTicketCommand internal: false. Entities affected : ID: 2ad22641-7aeb-4d1b-999e-2c0563376641 Type: VM > 2012-08-07 15:56:18,771 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--0.0.0.0-8009-13) [2a8bc3f4] START, SetVmTicketVDSCommand(vdsId = acfc94c0-d7e1-11e1-b35e-b38016c320bb, vmId=2ad22641-7aeb-4d1b-999e-2c0563376641, ticket=NvbcLbRR/7Vx, validTime=120,m userName=karli, userId=de526322-d046-4a06-911e-546e7159556e), log id: 3d61fa94 > 2012-08-07 15:56:18,816 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--0.0.0.0-8009-13) [2a8bc3f4] FINISH, SetVmTicketVDSCommand, log id: 3d61fa94 > > From the F17 client with "ovirt-shell" installed from ovirt-3.1 repo: > $ console milli > (window briefly flashes and disappeares again) > warning: could not fetch host certificate info cause used backend/sdk does not support it. > warning: host identity will not be validated. > > And have also used "spicec" directly from F17 client: > # spicec -h cirrus2-1.slu.se -p 5900 -s 5901 -w v36BkUumraDG (The first ticket had by this time expired, so this is a new one) > (flashes) > Error: failed to connect w/SSL, ssl_error error:00000001:lib(0):func(0):reason(1) > 140059992839392:error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed:s3_clnt.c:1063: > Warning: SSL Error: > # spicec -h cirrus2-1.slu.se -p 5900 -w v36BkUumraDG > (flashes) > Warning: connect error 5 - need secured connection > > # rpm -qa | egrep '(ovirt|vdsm)' > ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch > vdsm-cli-4.10.0-5.fc17.noarch > ovirt-engine-config-3.1.0-1.fc17.noarch > ovirt-engine-userportal-3.1.0-1.fc17.noarch > vdsm-4.10.0-5.fc17.x86_64 > ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch > ovirt-engine-sdk-3.1.0.4-1.fc17.noarch > ovirt-engine-restapi-3.1.0-1.fc17.noarch > ovirt-engine-backend-3.1.0-1.fc17.noarch > ovirt-engine-3.1.0-1.fc17.noarch > ovirt-engine-webadmin-portal-3.1.0-1.fc17.noarch > ovirt-engine-notification-service-3.1.0-1.fc17.noarch > ovirt-engine-dbscripts-3.1.0-1.fc17.noarch > vdsm-python-4.10.0-5.fc17.x86_64 > ovirt-engine-genericapi-3.1.0-1.fc17.noarch > ovirt-engine-tools-common-3.1.0-1.fc17.noarch > ovirt-engine-cli-3.1.0.6-1.fc17.noarch > vdsm-xmlrpc-4.10.0-5.fc17.noarch > vdsm-bootstrap-4.10.0-5.fc17.noarch > ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch > ovirt-engine-setup-3.1.0-1.fc17.noarch > > > The engine is installed with SSL as enabled by default, the hosts too. VDSM and libvirt are all active and validate fine towards the engine; have status "UP" and so on, but can't get SPICE console working. VNC works of course, but SPICE would be much cooler:) How do I get console working with SPICE? > > Best Regards > Karli Sjöberg > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users

1 0

[Users] sanlock issues
by Jacob Wyatt 07 Aug '12

07 Aug '12

oVirt Node Hypervisor release 2.5.0 (2.0.fc17) Can't start a VM. Same error in any of /var/log/libvirt/qemu/vmname.log libvir: Locking error : unsupported configuration: Read/write, exclusive access, disks were present, but no leases specified I've tried several suggestions including: modprobe softdog systemctl restart wdmd.service systemctl restart sanlock.service I haven't changed the default configs but I'm heading there next.

3 4

[Users] Call for Agenda: oVirt Weekly Meeting 2012-08-08
by Mike Burns 07 Aug '12

07 Aug '12

Meeting Time and Place oVirt Weekly Sync * Wednesdays @ 15:00 UTC (may change during DST changes) - always at 7:00am US Pacific, 10:00am US Eastern. * To see in your timezone date -d 'WEDNESDAY 1000 EDT' * On IRC: #ovirt on irc.oftc.net This is the agenda for the 2012-08-08 meeting: * Status of Next Release * Sub-project reports (engine, vdsm, node, infra) * Upcoming workshops If you have other topics, please reply to me and I will add them to the agenda. If you propose a topic, please be prepared to lead the discussion during the meeting. Thanks Mike

1 0

[Users] 3.1 network setup
by Jacob Wyatt 07 Aug '12

07 Aug '12

I just installed a new 3.1 engine and I have one node with the latest node iso installed. After setting up one of the network interfaces on the node and confirming I have network I am able to attach it to the engine. I've done this starting from both the node and the engine and it seems to work either way. Everything looks good until I go to the network controls in the web interface. I need to configure another network interface but to do so the ovirtmgmt network must be assigned to an interface. I'm not sure why it isn't already since the node is already assigned to a cluster. If I attempt to assign the management network it starts reconfiguring the node and then irrecoverably breaks the network on the node. By irrecoverable I mean I have to manually log in to the node as root and use ifdown to shut off all of the interfaces, delete all of the network configs under /config and then restart the machine and re-setup the network to get it back. Nothing less seems to restore network to the node. From what I can tell when the node is assigned to a cluster the network looks good on the node side. It's running a bridge named ovirtmgmt and seems to be happy. When the engine tries to assign ovirtmgmt to the node it creates a new bridge named after the network interface but is unable to start it. I've done a lot troubleshooting of network issues on 3.0 and have been able to work around them, but I seem to be at an impasse here. Without the additional network config my VM's won't work. Is there another way to force the network configuration without using the web interface? I know what the network setup should be. I've done all kinds of manual bridging, bonding, etc. under Fedora. I just can't seem to get oVirt to understand. -Jacob

2 6

[Users] Mix Opteron and Xeon CPUs
by Ian Levesque 06 Aug '12

06 Aug '12

Hi, Is it possible / planned to support different CPU types for VM hosts in oVirt? I'd like to add a host with Opteron 6128 CPUs to my cluster with an existing host that has Xeon E5506 CPUs. Unfortunately, the GUI informs me that "host does not meet the cluster's minimum CPU level. Missing CPU features : vmx, model_Conroe"; is there any way to use a more general "compatibility" mode? I know that native KVM/libvirt supported this, as I was able to live migrate VMs between these hosts before moving our infrastructure to oVirt. Thanks, Ian

2 1

Re: [Users] Upgrading ovirt-engine from Centos dre repo
by Neil 06 Aug '12

06 Aug '12

Hi guys, I've finally got round to running the engine-upgrade and it seems I've encountered an issue... On Thu, Aug 2, 2012 at 10:45 PM, Justin Clift <jclift(a)redhat.com> wrote: > On 02/08/2012, at 4:47 PM, Neil wrote: > <snip> >> We are running mission critical VM's on the install, so I can't risk >> something going wrong and the VM's stop running or access to them is >> lost. > > Ouch. :( > > I'm not all that in depth with oVirt, but do mess around with it a > bit for compatibility testing with Aeolus (a different project). > > From what I've seen so far, oVirt 3.0 is pretty stable, and I'd be > comfortable running VM's on that. > > oVirt 3.1 though... doesn't seem all that stable yet. Wouldn't > (personally) dare running anything even close to important on it. > > Hope you figure out a way to make things work. :) > > Regards and best wishes, > > Justin Clift > > -- > Aeolus Community Manager > http://www.aeolusproject.org > After eventually running "engine-upgrade --force-current-setup-rpm --no-yum-rollback" the upgrade script seems to have stopped at... Backing Up Database... [ DONE ] Rename Database... [ DONE ] Updating rpms... [ DONE ] Updating Database... [ DONE ] Restore Database name... [ DONE ] Running post install configuration... [ DONE ] Starting JBoss... Below is the log upgrade log. cat /var/log/ovirt-engine/ovirt-engine-upgrade_2012_08_06_14_41_17.log 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing pgpass file, fetching DB host value 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing pgpass file, fetching DB port value 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing pgpass file, fetching DB admin value 2012-08-06 14:41:17::INFO::dellsysid::23::trace.libsmbios_c._common:: ENTER _errorOnZeroFN(565, <_FuncPtr object at 0x140c1f0>, (), ) 2012-08-06 14:41:17::INFO::_common::55::trace.libsmbios_c._common:: RAN CTYPES FUNCTION: sysinfo_get_dell_system_id 2012-08-06 14:41:17::INFO::_common::54::trace.libsmbios_c._common:: LEAVE _errorOnZeroFN --> 565 2012-08-06 14:41:18::DEBUG::engine-upgrade::290::root:: Yum list updates started 2012-08-06 14:41:18::DEBUG::engine-upgrade::261::root:: Yum unlock started 2012-08-06 14:41:18::DEBUG::engine-upgrade::273::root:: Yum unlock completed successfully 2012-08-06 14:41:18::DEBUG::engine-upgrade::296::root:: Getting list of packages to upgrade 2012-08-06 14:42:39::DEBUG::engine-upgrade::248::root:: Yum lock started 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-genericapi' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-backend' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-jboss-deps' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-webadmin-portal' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-userportal' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-restapi' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-config' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-tools-common' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-notification-service' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::286::root:: cmd = /bin/rpm -q ovirt-engine-genericapi ovirt-engine ovirt-engine-backend ovirt-engine-jboss-deps ovirt-engine-webadmin-portal ovirt-engine-userportal ovirt-engine-restapi ovirt-engine-config ovirt-engine-tools-common ovirt-engine-notification-service >> /etc/yum/pluginconf.d/versionlock.list 2012-08-06 14:42:39::DEBUG::common_utils::291::root:: output = 2012-08-06 14:42:39::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::engine-upgrade::258::root:: Yum lock completed successfully 2012-08-06 14:42:39::DEBUG::engine-upgrade::304::root:: 12 Packages marked for update: 2012-08-06 14:42:39::DEBUG::engine-upgrade::305::root:: ['ovirt-engine-3.1.0-3.15.el6.noarch', 'ovirt-engine-backend-3.1.0-3.15.el6.noarch', 'ovirt-engine-config-3.1.0-3.15.el6.noarch', 'ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch', 'ovirt-engine-genericapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-notification-service-3.1.0-3.15.el6.noarch', 'ovirt-engine-restapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-setup-3.1.0-3.15.el6.noarch', 'ovirt-engine-tools-common-3.1.0-3.15.el6.noarch', 'ovirt-engine-userportal-3.1.0-3.15.el6.noarch', 'ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch', 'vdsm-bootstrap-4.10.0-0.191.9.el6.noarch'] 2012-08-06 14:42:39::DEBUG::engine-upgrade::311::root:: Installed packages: 2012-08-06 14:42:39::DEBUG::engine-upgrade::312::root:: ['ovirt-engine-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64', 'vdsm-bootstrap-4.9.6-0.150.git63061a9.el6.noarch'] 2012-08-06 14:42:39::DEBUG::engine-upgrade::314::root:: Yum list updated completed successfully 2012-08-06 14:42:39::DEBUG::engine-upgrade::324::root:: Yum rollback-avail started 2012-08-06 14:42:39::DEBUG::engine-upgrade::330::root:: 12 Packages available in yum: 2012-08-06 14:42:39::DEBUG::engine-upgrade::331::root:: ['ovirt-engine-3.1.0-3.15.el6.noarch', 'ovirt-engine-backend-3.1.0-3.15.el6.noarch', 'ovirt-engine-config-3.1.0-3.15.el6.noarch', 'ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch', 'ovirt-engine-genericapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-notification-service-3.1.0-3.15.el6.noarch', 'ovirt-engine-restapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-setup-3.1.0-3.15.el6.noarch', 'ovirt-engine-tools-common-3.1.0-3.15.el6.noarch', 'ovirt-engine-userportal-3.1.0-3.15.el6.noarch', 'ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch', 'vdsm-bootstrap-4.10.0-0.191.9.el6.noarch'] 2012-08-06 14:42:39::DEBUG::engine-upgrade::337::root:: ovirt-engine-3.1.0_0001-1.8.el6.x86_64 not available in yum 2012-08-06 14:42:39::DEBUG::engine-upgrade::162::root:: checking the status of jbossas service 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/sbin/service jboss-as status' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = jboss-as is running (pid 6812) 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::engine-upgrade::167::root:: jbossas service is up and running 2012-08-06 14:42:39::DEBUG::engine-upgrade::141::root:: asking user: Would you like to proceed? (yes|no): 2012-08-06 14:42:49::DEBUG::engine-upgrade::145::root:: user answered: yes 2012-08-06 14:42:49::DEBUG::engine-upgrade::477::root:: stopping jboss service. 2012-08-06 14:42:49::DEBUG::common_utils::309::root:: Executing command --> '/sbin/service jboss-as stop' 2012-08-06 14:42:50::DEBUG::common_utils::335::root:: output = Stopping jboss-as: [ OK ] 2012-08-06 14:42:50::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:50::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:50::DEBUG::engine-upgrade::516::root:: Verifing update is related to db 2012-08-06 14:42:50::DEBUG::engine-upgrade::523::root:: isUpdateRelatedToDb value is True 2012-08-06 14:42:50::DEBUG::engine-upgrade::414::root:: DB Backup started 2012-08-06 14:42:50::DEBUG::common_utils::309::root:: Executing command --> '/usr/bin/pg_dump -C -E UTF8 --column-inserts --disable-dollar-quoting --disable-triggers -U postgres -h localhost -p 5432 --format=p -f /usr/share/ovirt-engine/db-backups/ovirt-engine_db_backup_2012_08_06_14_41_18.sql engine' 2012-08-06 14:42:51::DEBUG::common_utils::335::root:: output = 2012-08-06 14:42:51::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:51::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:51::DEBUG::engine-upgrade::420::root:: DB Backup completed successfully 2012-08-06 14:42:51::DEBUG::common_utils::350::root:: running sql query 'ALTER DATABASE engine RENAME TO engine_2012_08_06_14_41_18' on db server: 'localhost'. 2012-08-06 14:42:51::DEBUG::common_utils::286::root:: cmd = /usr/bin/psql -h localhost -p 5432 -U postgres -d postgres -c "ALTER DATABASE engine RENAME TO engine_2012_08_06_14_41_18" 2012-08-06 14:42:51::DEBUG::common_utils::291::root:: output = ALTER DATABASE 2012-08-06 14:42:51::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:51::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:51::DEBUG::engine-upgrade::364::root:: Yum getLatestTid started 2012-08-06 14:42:51::DEBUG::common_utils::309::root:: Executing command --> '/usr/bin/yum history list ovirt-engine' 2012-08-06 14:42:51::DEBUG::common_utils::335::root:: output = Loaded plugins: dellsysid, fastestmirror, refresh-packagekit, security, : versionlock ID | Login user | Date and time | Action(s) | Altered ------------------------------------------------------------------------------- 7 | root <root> | 2012-05-23 18:38 | Install | 50 history list 2012-08-06 14:42:51::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:51::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:51::DEBUG::engine-upgrade::386::root:: Found TID: 7 2012-08-06 14:42:51::DEBUG::engine-upgrade::387::root:: Yum getLatestTid completed successfully 2012-08-06 14:42:51::DEBUG::engine-upgrade::261::root:: Yum unlock started 2012-08-06 14:42:51::DEBUG::engine-upgrade::273::root:: Yum unlock completed successfully 2012-08-06 14:42:51::DEBUG::engine-upgrade::281::root:: Yum update started 2012-08-06 14:42:51::DEBUG::common_utils::309::root:: Executing command --> '/usr/bin/yum update -q -y ovirt-engine-notification-service ovirt-engine-genericapi ovirt-engine ovirt-engine-tools-common ovirt-engine-backend ovirt-engine-iso-uploader ovirt-engine-jboss-deps ovirt-engine-log-collector ovirt-engine-userportal ovirt-engine-restapi ovirt-engine-config ovirt-engine-setup ovirt-engine-dbscripts vdsm-bootstrap ovirt-engine-webadmin-portal' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::engine-upgrade::284::root:: Yum update completed successfully 2012-08-06 14:42:56::DEBUG::engine-upgrade::248::root:: Yum lock started 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-genericapi' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-backend' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-jboss-deps' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-webadmin-portal' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-userportal' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-restapi' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-config' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-tools-common' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-notification-service' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::286::root:: cmd = /bin/rpm -q ovirt-engine-genericapi ovirt-engine ovirt-engine-backend ovirt-engine-jboss-deps ovirt-engine-webadmin-portal ovirt-engine-userportal ovirt-engine-restapi ovirt-engine-config ovirt-engine-tools-common ovirt-engine-notification-service >> /etc/yum/pluginconf.d/versionlock.list 2012-08-06 14:42:56::DEBUG::common_utils::291::root:: output = 2012-08-06 14:42:56::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::engine-upgrade::258::root:: Yum lock completed successfully 2012-08-06 14:42:56::DEBUG::engine-upgrade::516::root:: Verifing update is related to db 2012-08-06 14:42:56::DEBUG::engine-upgrade::523::root:: isUpdateRelatedToDb value is True 2012-08-06 14:42:56::DEBUG::engine-upgrade::445::root:: DB Update started 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/usr/share/ovirt-engine/dbscripts/upgrade.sh -s localhost -p 5432 -u postgres -d engine_2012_08_06_14_41_18' 2012-08-06 14:42:57::DEBUG::common_utils::335::root:: output = database is up to date. Done. 2012-08-06 14:42:57::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:57::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:57::DEBUG::engine-upgrade::452::root:: DB Update completed successfully 2012-08-06 14:42:57::DEBUG::common_utils::350::root:: running sql query 'ALTER DATABASE engine_2012_08_06_14_41_18 RENAME TO engine' on db server: 'localhost'. 2012-08-06 14:42:57::DEBUG::common_utils::286::root:: cmd = /usr/bin/psql -h localhost -p 5432 -U postgres -d postgres -c "ALTER DATABASE engine_2012_08_06_14_41_18 RENAME TO engine" 2012-08-06 14:42:57::DEBUG::common_utils::291::root:: output = ALTER DATABASE 2012-08-06 14:42:57::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:57::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:57::DEBUG::engine-upgrade::491::root:: Running post script 2012-08-06 14:42:57::DEBUG::common_utils::678::root:: retrieving build number for ovirt-engine rpm 2012-08-06 14:42:57::DEBUG::common_utils::286::root:: cmd = rpm -q --queryformat '%{VERSION}-%{RELEASE}' ovirt-engine 2012-08-06 14:42:57::DEBUG::common_utils::291::root:: output = 3.1.0_0001-1.8.el6 2012-08-06 14:42:57::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:57::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:57::DEBUG::common_utils::654::root:: updating vdc option ProductRPMVersion to: 3.1.0_0001-1.8.el6 2012-08-06 14:42:57::DEBUG::common_utils::309::root:: Executing command --> '/usr/share/ovirt-engine/engine-config/engine-config -s ProductRPMVersion=3.1.0_0001-1.8.el6 --cver=general -p /usr/share/ovirt-engine/conf/engine-config-install.properties' 2012-08-06 14:42:58::DEBUG::common_utils::335::root:: output = 2012-08-06 14:42:58::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:58::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:58::DEBUG::engine-upgrade::494::root:: Post script completed successfully 2012-08-06 14:42:58::DEBUG::engine-upgrade::486::root:: starting jboss service. 2012-08-06 14:42:58::DEBUG::common_utils::309::root:: Executing command --> '/sbin/service jboss-as start' Any ideas what to try next? Thanks. Regards. Neil Wilson.

1 1

[Users] Live snapshots. About how far off is it?
by Karli Sjöberg 06 Aug '12

06 Aug '12

--_000_BC13E836E51C4C47ADF762C605812F8Fsluse_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, the subject says it all really. I=B4ve been setting up oVirt-3.1 and absolu= tely love it, I must say. There=B4s just that you have to take down a guest= to make snapshots that ticks me off a little. It disrupts production. So h= ow far off, 6 months, a year, two years? What priority has it on the roadma= p? Any response would appreciated, it makes it easier to plan a migration. Med V=E4nliga H=E4lsningar ---------------------------------------------------------------------------= ---- Karli Sj=F6berg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kron=E5sv=E4gen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjoberg(a)slu.se<mailto:karli.sjoberg@adm.slu.se> --_000_BC13E836E51C4C47ADF762C605812F8Fsluse_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html><head></head><body style=3D"word-wrap: break-word; -webkit-nbsp-mode:= space; -webkit-line-break: after-white-space; ">Hi,<div><br></div><div>the= subject says it all really. I=B4ve been setting up oVirt-3.1 and absolutel= y love it, I must say. There=B4s just that you have to take down a guest to= make snapshots that ticks me off a little. It disrupts production. So how = far off, 6 months, a year, two years? What priority has it on the roadmap? = Any response would appreciated, it makes it easier to plan a migration.<br>= <div> <span class=3D"Apple-style-span" style=3D"border-collapse: separate; color:= rgb(0, 0, 0); font-family: Helvetica; font-style: normal; font-variant: no= rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp= hans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; = white-space: normal; widows: 2; word-spacing: 0px; -webkit-border-horizonta= l-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorati= ons-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-wi= dth: 0px; font-size: medium; "><div><br class=3D"Apple-interchange-newline"= ><br></div><div>Med V=E4nliga H=E4lsningar<br>-----------------------------= --------------------------------------------------<br>Karli Sj=F6berg<br>Sw= edish University of Agricultural Sciences<br>Box 7079 (Visiting Address Kro= n=E5sv=E4gen 8)<br>S-750 07 Uppsala, Sweden<br>Phone:  +46-(0)18-67 15= 66</div><div><a href=3D"mailto:karli.sjoberg@adm.slu.se">karli.sjoberg@slu= .se</a></div></span> </div> <br></div></body></html>= --_000_BC13E836E51C4C47ADF762C605812F8Fsluse_--

4 4

[Users] Looking for help: Demo videos
by Dave Neary 06 Aug '12

06 Aug '12

Hi everyone, Last week I pitched the idea of having some demo videos (I called them "screencasts" although that's not quite accurate) ready before the 3.1 release next week. I don't have the domain knowledge to do this myself, so I need your help! What is there to do? 1. Go to http://wiki.ovirt.org/wiki/Screencasts - have a look at the features I've proposed for the first round of videos. If you really think one of them shouldn't be there, or there's a really important feature you'd like to see a demo for, please reply here and we'll discuss it. You can always add a proposed feature with the skeleton template to the Screencasts page also, but there's no guarantee we'll have a video by the time the release comes around. It would helkp me prioritise if we could gather feedback here. 2. For each feature, we should have a scenario/script for the demo, including: * Required pre-requisites and set-up (what do I need to do before I start the demo) * A step by step description of how to show the feature being demoed Right now, only two features are described, and those descriptions may need work. If you see a feature which is not yet described, and you know how to use it, please add a little script following the template. If you see a feature which is not described well enough, please update the description. 3. For each feature with a script, we need a video. I have started a page to help people record videos of their screen, for the systems I know about: http://wiki.ovirt.org/wiki/Recording_video - the videos (without sound) can, I think, be attached to the wiki page - ogv or webm format preferably, please! 4. For each video, we will need a sound-track. I'm happy to voice over some of the videos, but again, it would be nice to spread the load. We're not even here yet, though. Thanks everyone for your help! It will be greatly appreciated. Regards, Dave. -- Dave Neary Community Action and Impact Open Source and Standards Team, Red Hat Phone: +33 9 50 71 55 62

3 2

[Users] Unable to start engine from rpm install.
by snmishra＠linux.vnet.ibm.com 04 Aug '12

04 Aug '12

Hi, I have been building and running engine on my dev machine from source. Today I tried to install and setup engine from RPM on another machine. I followed the procedure from http://wiki.ovirt.org/wiki/Installing_ovirt_from_rpm. But I get the following error - oVirt Engine will be installed using the following configuration: ================================================================= override-httpd-config: yes http-port: 80 https-port: 443 host-fqdn: ichigo-dom235.phx.austin.ibm.com auth-pass: ******** org-name: ibm default-dc-type: NFS db-remote-install: local db-local-pass: ******** config-nfs: no override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ ERROR ] Error: Can't start the ovirt-engine service Please check log file /var/log/ovirt-engine/engine-setup_2012_08_03_16_16_41.log for more information And the log shows - 2012-08-03 18:08:56::DEBUG::engine-setup::1747::root:: config-nfs: no 2012-08-03 18:08:56::DEBUG::engine-setup::1747::root:: override-iptables: no 2012-08-03 18:08:56::ERROR::engine-setup::2376::root:: Traceback (most recent call last): File "/bin/engine-setup", line 2370, in <module> main(confFile) File "/bin/engine-setup", line 2159, in main runSequences() File "/bin/engine-setup", line 2105, in runSequences controller.runAllSequences() File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in runAllSequences sequence.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in run step.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run function() File "/bin/engine-setup", line 1535, in _startJboss srv.start(True) File "/usr/share/ovirt-engine/scripts/common_utils.py", line 795, in start raise Exception(output_messages.ERR_FAILED_START_SERVICE % self.name) Exception: Error: Can't start the ovirt-engine service I verified that there was no java process running before starting 'engine-setup'. I also noticed that .../standalone/deployment/ directory only had a README file. Any Clues? -Sharad

2 1

[Users] Node as guest - Nested KVM
by Douglas Landgraf 03 Aug '12

03 Aug '12

This is a multi-part message in MIME format. --------------030900080005030708090405 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, I remember someone asking about this topic few weeks ago, here the steps: http://wiki.ovirt.org/wiki/Vdsm_Developers#Running_Node_as_guest_-_Nested_K… Enjoy and fell free to improve it! -- Cheers Douglas --------------030900080005030708090405 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Hi,<br> <br> I remember someone asking about this topic few weeks ago, here the steps:<br> <a href="http://wiki.ovirt.org/wiki/Vdsm_Developers#Running_Node_as_guest_-_Nested_K…">http://wiki.ovirt.org/wiki/Vdsm_Developers#Running_Node_as_guest_-_Nested_K…</a><br> <br> Enjoy and fell free to improve it!<br> <br> <pre class="moz-signature" cols="72">-- Cheers Douglas</pre> </body> </html> --------------030900080005030708090405--

3 2

[Users] User management broken in 3.0 ?
by Alex Leonhardt 03 Aug '12

03 Aug '12

This is a multi-part message in MIME format. --------------060207040707040004040507 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi there, I've been using 3.0 for some testing recently and was very confused by how to manage new users !? It doesnt seem to be possible to add more "local" users at all ? Or is there a document you can point me at ? Alex --------------060207040707040004040507 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <font size="-1"><font face="Tahoma">Hi there,<br> <br> I've been using 3.0 for some testing recently and was very confused by how to manage new users !? It doesnt seem to be possible to add more "local" users at all ? Or is there a document you can point me at ? <br> <br> Alex<br> <br> </font></font> </body> </html> --------------060207040707040004040507--

3 3

Re: [Users] Failure to migrate from one host out of four
by Karli Sjöberg 03 Aug '12

03 Aug '12

3 aug 2012 kl. 09.55 skrev Karli Sjöberg: > > 3 aug 2012 kl. 09.30 skrev Martin Kletzander: > >> On 08/02/2012 04:20 PM, Karli Sjöberg wrote: >>> Sorry man, I spoke too soon. It´s back again:( >>> >>> I´ve got another guest "stuck". It´s all for testing at this point, so I >>> can basically do anything I want with it, so I just shut it down and put >>> the host back into maintenance. I guess something must still have the >>> old locale written in some conf somewhere, set after it was installed. >>> Do you know where to start looking? >>> >> >> No problem, but I don't think it will be the locale again. BTW I took >> this off-list when I replied to you last time. Try looking at >> libvirtd.log again. If you don't find anything, then you can try sending >> it to me or libvirt-users list (if it is libvirt that's doing the >> problem, but I don't think so). >> >> Martin > > Well, hasty as I am, I thought that maybe it would be good to remove glibc and glib-common, and then installing again... Turns out that don´t work out too well, haha:) So I´m reinstalling it right now, and was careful to choose us_EN this time. Will keep you posted on how it turns out. After a clean reinstall and us_EN locale it´s working again, just as expected. I´ll still keep an eye on it though, just in case. /Karli

1 0

[Users] Managing Remote Access to Physical Workstations
by Randall Wood 03 Aug '12

03 Aug '12

I have an environment where I would like to be able to provide users with a single web interface from which they would be able to open a console on either a virtual machine or on a physical machine. Playing with a clean install of oVirt 3.1 suggests that oVirt is not capable of doing this. Has anyone successfully configured oVirt to provide this capability, or know of a system that could integrate with oVirt to meet that requirement? -- Randall Wood Alexandria Software http://www.alexandriasoftware.com randall.h.wood(a)alexandriasoftware.com 202.683.8604

5 10

Re: [Users] Managing Remote Access to Physical Workstations
by Sigbjorn Lie 02 Aug '12

02 Aug '12

Hi, Then you should still have a look at the Leostream Connection Broker. (www.leostream.com) One of the latest features we're integration with Red Hat Enterprise Virtualization / (ovirt). And they support both Windows and Linux. They support a wide variety of protocols and flexible configurations as well. Regards, Siggi On Thu, August 2, 2012 15:13, Randall Wood wrote: > Yes, I have a few of those available. They are nice (when the > bandwidth is there to support them). > > I'm looking for a single broker interface for both physical and > virtual machines that supports both Windows and Linux. > > On Thu, Aug 2, 2012 at 9:03 AM, Sigbjorn Lie <sigbjorn(a)nixtra.com> wrote: > >> Hi, >> >> >> Have you looked at Teradici PCoIP? They have a hardware solution based on a PCIe card in the >> host machine, and a PCoIP thin client. The performance is stunning. You don't even notice that >> you're connected to a thin client. I'm using this on a daily basis myself. >> >> To get a broker you can use Leostream's Connection Broker which supports Teradici PCoIP both >> for Windows and Linux. >> >> >> You will be needing the thin client when connecting. I don't think you can use a software >> client to connect to the physical machines. You can ask Leostream about this. >> >> See the following youtube video for more info: >> http://www.youtube.com/watch?v=NWjhAHDQZ7E >> >> >> This solution is for physical machines, not virtual machines. >> >> >> >> Regards, >> Siggi >> >> >> >> >> >> On Thu, August 2, 2012 14:44, Randall Wood wrote: >> >>> Sorry for the delay in responding. >>> >>> >>> >>> I have a set of users (about 50) who have Linux workstations at their >>> desks. These users have root access to these workstations, and these workstations are >>> frequently host VMs or are used for hardware driver development and support. These users have >>> access to a pool of managed Windows 7 VMs (for MS Office applications) in oVirt, so they are >>> already using the oVirt user portal. I would like to give these users remote access to their >>> workstations (from thin clients in conference rooms, from home, from corporate laptops on the >>> road, etc) using the same User Portal that they already use for the Windows VMs. >>> >>> VMware View and Citrix XenDesktop support providing users access to a >>> mixed set of managed-virtual-machine or unmanaged-physical-or-virtual-machine through a single >>> broker, but neither of them support access to Linux desktops. >>> >>> On Sat, Jul 21, 2012 at 2:33 AM, Johan Kragsterman >>> <johan.kragsterman(a)capvert.se> wrote: >>> >>> >>>> Hi, Randall! >>>> >>>> >>>> >>>> What you need is a "broker", and a terminal server is working as a "broker". There are >>>> several solutions that will work, but first I would want to know why you need physical >>>> machines? Are there demanding graphical applications you're going to run, or...? >>>> >>>> Rgrds Johan >>>> >>>> >>>> >>>> -----users-bounces(a)ovirt.org skrev: ----- >>>> Till: Itamar Heim <iheim(a)redhat.com> >>>> Från: Randall Wood >>>> Sänt av: users-bounces(a)ovirt.org >>>> Datum: 2012.07.20 22:37 >>>> Kopia: "users(a)ovirt.org" <users(a)ovirt.org> >>>> Ärende: Re: [Users] Managing Remote Access to Physical Workstations >>>> >>>> >>>> >>>> On Jul 20, 2012, at 16:30, Itamar Heim <iheim(a)redhat.com> wrote: >>>> >>>> >>>> >>>>> On 07/20/2012 11:13 PM, Randall Wood wrote: >>>>> >>>>> >>>>>> >>>>>>> No. oVirt's focus is virtual machines so the user portal only lets you open up >>>>>>> consoles on VMs managed by oVirt engine. >>>>>> >>>>>> I thought so. >>>>>> >>>>>> >>>>>> >>>>>>> When you say physical machines - would they be Linux or could they be Windows? >>>>>>> I might have an idea ...... >>>>>>> >>>>>>> >>>>>> >>>>>> The physical machines would all be RHEL, CentOS, or Fedora. >>>>>> >>>>>> >>>>> >>>>> which protocol would you expect users to use to gain access to this physical machines? >>>> >>>> I would prefer SPICE, but could use SPICE, VNC, or RDP. >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >>> >>> >>> -- >>> Randall Wood >>> Alexandria Software >>> http://www.alexandriasoftware.com >>> randall.h.wood(a)alexandriasoftware.com 202.683.8604 >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >> >> > > > > -- > Randall Wood > Alexandria Software > http://www.alexandriasoftware.com > randall.h.wood(a)alexandriasoftware.com 202.683.8604 > >

1 0