December 2013 - Users - oVirt List Archives

Re: [Users] Failing migration, inconsistent state
by Martijn Grendelman 17 Dec '13

17 Dec '13

Martijn Grendelman schreef op 5-12-2013 11:00: > Hi, > > I tried to migrate several VMs from one host to another. Two VMs > migrated without issues, but for one VM, the migration didn't happen. It > seems to be hanging, but the UI is now in an inconsistent state: > > - The 'Tasks' tab reports 0 active tasks, but the last task (the > migration in question) is still reported as 'Executing'. > - The VM status is 'Up' (not migrating) > - 'Migrate' action is choosable from menu, while 'Cancel Migration' is > greyed out, but when I choose 'Migrate' and pick a host, I am told > 'Cannot migrate VM. VM <name> is being migrated.'. > > What is the best way to fix this? And perhaps this information is useful to oVirt developers: > Thread-600648::DEBUG::2013-12-03 12:37:47,926::vm::180::vm.Vm::(_setupVdsConnection) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::Destination server is: onode0.isaac.local:54321 > Thread-600648::DEBUG::2013-12-03 12:37:47,927::vm::182::vm.Vm::(_setupVdsConnection) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::Initiating connection with destination > Thread-600648::DEBUG::2013-12-03 12:37:47,990::vm::232::vm.Vm::(_prepareGuest) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::Migration started > Thread-600648::DEBUG::2013-12-03 12:37:48,006::vm::299::vm.Vm::(run) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::migration semaphore acquired > Thread-600648::DEBUG::2013-12-03 12:37:48,115::vm::357::vm.Vm::(_startUnderlyingMigration) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::starting migration to qemu+tls://onode0.isaac.local/system with miguri tcp://onode0.isaac.local > Thread-600648::DEBUG::2013-12-03 12:43:10,819::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 9 edom: 10 level: 2 message: operation failed: migration job: unexpectedly failed > Thread-600648::DEBUG::2013-12-03 12:43:10,819::vm::742::vm.Vm::(cancel) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::canceling migration downtime thread > Thread-600648::DEBUG::2013-12-03 12:43:10,819::vm::812::vm.Vm::(stop) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::stopping migration monitor thread > Thread-600648::ERROR::2013-12-03 12:43:10,820::vm::238::vm.Vm::(_recover) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::operation failed: migration job: unexpectedly failed > Thread-600648::ERROR::2013-12-03 12:43:11,276::vm::321::vm.Vm::(run) vmId=`0669e3c2-9cfd-4d4e-a0a3-56070902a8c8`::Failed to migrate > Traceback (most recent call last): > File "/usr/share/vdsm/vm.py", line 308, in run > self._startUnderlyingMigration() > File "/usr/share/vdsm/vm.py", line 385, in _startUnderlyingMigration > None, maxBandwidth) > File "/usr/share/vdsm/vm.py", line 835, in f > ret = attr(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line 76, in wrapper > ret = f(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1178, in migrateToURI2 > if ret == -1: raise libvirtError ('virDomainMigrateToURI2() failed', dom=self) > libvirtError: operation failed: migration job: unexpectedly failed Cheers, Martijn.

2 1

[Users] Problem introducing VDSM hosts
by Garry Tiedemann 17 Dec '13

17 Dec '13

Hi folks, We are setting up ovirt on Proliant BL460c blades (mix of G1 & G6), and found an interesting problem. Can anyone here can offer guidance on how to approach this please? Also, I would be interested to know others' experiences of using ovirt on BladeSystem gear. The problem: When trying to introduce a new VDSM host, the install fails, immediately. It's reproducible; we tried more than a dozen times, with different combinations of NICs, to eliminate hardware faults. These messages appear on the VDSM host: Dec 13 10:55:24 bl05 sshd[2627]: pam_unix(sshd:session): session opened for user root by (uid=0) Dec 13 10:55:24 bl05 sshd[2627]: Corrupted MAC on input. Dec 13 10:55:24 bl05 sshd[2627]: Disconnecting: Packet corrupt Dec 13 10:55:24 bl05 sshd[2627]: pam_unix(sshd:session): session closed for user root It seems to be a checksum problem. Google has plenty of similar reports (none ovirt-related), and very little in the way of troubleshooting tips. We have eliminated physical hardware; memory has tested OK, and alternative network ports have been tried, with the same result. I expected to be able to reproduce the issue outside ovirt, by scping large files back and forth, however, this did not cause errors. I believe it's a software matter, possibly TOE, but I don't know how to take it further. We are using FC19 for both the ovirt-engine and vdsm hosts. Any guidance on how to solve this would be much appreciated. Thanks in advance, Garry

2 1

[Users] Keepalived on oVirt Hosts has engine networking issues
by Andrew Lau 17 Dec '13

17 Dec '13

Hi, I have the scenario where I have gluster and ovirt hosts on the same box, to keep the gluster volumes highly available incase a box drops I'm using keepalived across the boxes and using that IP as the means for the storage domain. I documented my setup here in case anyone needs a little more info http://www.andrewklau.com/returning-to-glusterized-ovirt-3-3/ However, the engine seems to be picking up the floating IP assigned to keepalived as the interface and messing with the ovirtmgmt migration network, so migrations are failing as my floating IP gets assigned to the ovirtmgmt bridge in the engine however it's not actually there on most hosts (except one) so vdsm seems to report destination same as source. I've since created a new vlan interface just for storage to avoid the ovirtmgmt conflict, but the engine will still pick up the wrong IP on the storage vlan because of keepalived. This means I can't use the save network feature within the engine as it'll save the floating ip rather than the one already there. Is this a bug or just the way it's designed. eth0.2 -> ovirtmgmt (172.16.0.11) -> management and migration network -> engine sees, sets and saves 172.16.0.11 eth0.3 -> storagenetwork (172.16.1.11) -> gluster network -> engine sees, sets and saves 172.16.1.5 (my floating IP) I hope this makes sense. p.s. can anyone also confirm, does gluster support multi pathing by default? If I'm using this keepalived method, am I bottle necking myself to one host? Thanks, Andrew

4 5

[Users] errors in engine log and tones of sync messages
by Juan Pablo Lorier 17 Dec '13

17 Dec '13

Hi, I'm trying to debug why I can't import a VM to my brand new glusterfs domain and I see that engine.log is full of gluster volumelist calls and less but often, errors of not been able to call async, I'm I missing any package to install in the engine other than vdsm-gluster? Is there a way not to log all the VolumeList commands (without lowering log level) to avoid having so many entries that difficult searching in the log? Regards, : 5c8baf53 2013-12-13 13:27:58,504 ERROR [org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] (DefaultQuartzScheduler_Worker-33) Failed to invoke scheduled method gluster_async_task_poll_event: java.lang.reflect.InvocationTargetException at sun.reflect.GeneratedMethodAccessor108.invoke(Unknown Source) [:1.7.0_45] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.7.0_45] at java.lang.reflect.Method.invoke(Method.java:606) [rt.jar:1.7.0_45] at org.ovirt.engine.core.utils.timer.JobWrapper.execute(JobWrapper.java:60) [scheduler.jar:] at org.quartz.core.JobRunShell.run(JobRunShell.java:213) [quartz.jar:] at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:557) [quartz.jar:] Caused by: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apache.xmlrpc.XmlRpcException: <type 'exceptions.Exception'>:method "glusterTasksList" is not supported (Failed with error VDS_NETWORK_ERROR and code 5022) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:122) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService.runVdsCommand(GlusterTasksService.java:60) [bll.jar:] at org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService.getTaskListForCluster(GlusterTasksService.java:28) [bll.jar:] at org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updateTasksInCluster(GlusterTasksSyncJob.java:67) [bll.jar:] at org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updateGlusterAsyncTasks(GlusterTasksSyncJob.java:56) [bll.jar:] ... 6 more 2013-12-13 13:28:00,655 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-68) START, GlusterVolumesListVDSCommand(HostName = Dell4, HostId = 001f72ef-fac6-42bc-be8e-b17e249e80bd), log id: 75cbf869 2013-12-13 13:28:00,692 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-68) FINISH, GlusterVolumesListVDSCommand, return: {30759593-86cf-47d3-8527-d36623674ea6=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@ac95f510}, log id: 75cbf869 2013-12-13 13:28:05,743 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-67) START, GlusterVolumesListVDSCommand(HostName = Dell3, HostId = 342b037f-e4ab-4c3b-b804-806d3ec30ba9), log id: 76386ce 2013-12-13 13:28:07,241 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-67) FINISH, GlusterVolumesListVDSCommand, return: {30759593-86cf-47d3-8527-d36623674ea6=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@ee3bee7d}, log id: 76386ce

4 6

[Users] oVirt 3.3.2 RC
by Sandro Bonazzola 16 Dec '13

16 Dec '13

The oVirt team is pleased to announce that the 3.3.2 Release Candidate is now available in ovirt-updates-testing [1]. We planned to release it on Wed Dec 18th 2013 but it will probably be postponed to next week for allowing more testing on the RC. The release date will be decided in next oVrit sync meeting on Wed Dec 18th. Feel free to join us testing it[2] and verifying the bugzilla entries actually under verification [3]. Release notes for this update are available on the wiki [4]. A new oVirt Node build will be available soon as well. [1] http://resources.ovirt.org/releases/updates-testing [2] http://www.ovirt.org/Testing/Ovirt_3.3.2_testing [3] http://red.ht/19NoJKf [4] http://www.ovirt.org/OVirt_3.3.2_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Users] simple networking?
by Ted Miller 16 Dec '13

16 Dec '13

I am trying to set up a testing network using o-virt, but the networking is refusing to cooperate. I am testing for possible use in two different production setups. My previous experience has been with VMWare. I have always set up a single bridged network on each host. All my hosts, VMs, and non-VM computers were peers on the LAN. They could all talk to each other, and things worked very well. There was a firewall/gateway that provided access to the Internet, and hosts, VMs, and could all communicate with the Internet as needed. o-virt seems to be compartmentalizing things beyond all reason. Is there any way to set up simple networking, so ALL computers can see each other? Is there anywhere that describes the philosophy behind the networking setup? What reason is there that networks are so divided? After banging my head against the wall trying to configure just one host, I am very frustrated. I have spent several HOURS Googling for a coherent explanation of how/why networking is supposed to work, but only fine obscure references like "letting non-VMs see VM traffic would be a huge security violation". I have no concept of what king of an installation the o-virt designers have in mind, but it is obviously worlds different from what I am trying to do. The best I can tell, o-virt networking works like this (at least when you have only one NIC): there must be an ovirtmgt network, which cannot be combined with any other network. the ovirtmgt network cannot talk to VMs (unless that VM is running the engine) the ovirtmgt network can only talk to hosts, not to other non-VM computers a VM network can talk only to VMs cannot talk to hosts cannot talk to non-VMs hosts cannot talk to my LAN hosts cannot talk to VMs VMs cannot talk to my LAN All of the above are enforced by a boatload of firewall rules that o-virt puts into every host and VM under its jurisdiction. All of the above is inferred from things I Googled, because I can't find anywhere that explains what or how things are supposed to work--only things telling people WHAT THEY CANT DO. All I see on the mailing lists is people getting their hands slapped because they are trying to do SIMPLE SETUPS that should work, but don't (due to either design restrictions or software bugs). My use case A: * My (2 or 3) hosts have only one physical NIC. * My VMs exist to provide services to non-VM computers. * The VMs do not run X-windows, but they provide GUI programs to non-VMs via "ssh -X" connections. * MY VMs need access to storage that is shared with hosts and non-VMs on the LAN. Is there some way to TURN OFF network control in o-virt? My systems are small and static. I can hand-configure the networking a whole lot easier than I can deal with o-virt (as I have used it so far). Mostly I would need to be able to turn off the firewall rules on both hosts and VMs. banging head against wall, Ted

7 13

[Users] Upgrade from 3.3.1-2 el6 to 3.3.2
by Sven Kieske 16 Dec '13

16 Dec '13

Hi, got a question regarding engine upgrades: My current setup: I got 3.3.1-2.el6 installed from ovirt-beta repo and want to upgrade to 3.3.2 RC. According to: http://www.ovirt.org/OVirt_3.3.2_release_notes "oVirt 3.3.2 release candidate is available for testing. In order to install it you've to enable ovirt-updates-testing repository." I need ovirt-updates-testing enabled? Shall I disable ovirt-beta repo? Additional info: the base os is still CentOS 6.4 Did anyone perform an inplace upgrade to 6.5? Is this recommended? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 2

[Users] Documentation incoming
by Sven Kieske 16 Dec '13

16 Dec '13

Hi, just for all who are curious: There is a large package of documentation for oVirt at redhat.com: https://access.redhat.com/site/documentation/Red_Hat_Enterprise_Virtualizat… There is also beta documentation for 3.3. This is more structured than the ovirt.org wiki. Maybe this helps someone. PS: In case you do not know: Red Hat Enterprise Virtualization (RHEV for short) is a downstream product build from oVirt, so almost everything in the docs should be transferable to oVirt. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

1 0

[Users] Authentication
by Maurice James 16 Dec '13

16 Dec '13

--_fd849e30-761c-499c-ae24-10dcc6356ed6_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I was curious to know how is the update of the authentication options comin= g. Right now the only option for external authentication involves the use o= f Kerberos. I am interested in using an LDAP only model (389-ds) without Ke= rberos. = --_fd849e30-761c-499c-ae24-10dcc6356ed6_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'>I was curious to know how is the= update of the authentication options coming. Right now the only option for= external authentication involves the use of Kerberos. I am interested in u= sing an LDAP only model (389-ds) without Kerberos. </div></body> </html>= --_fd849e30-761c-499c-ae24-10dcc6356ed6_--

2 1

[Users] hot add ram to a vm
by Nathanaël Blanchet 16 Dec '13

16 Dec '13

This is a multi-part message in MIME format. --------------080308040608050209070102 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Hello, Is hot add ram to a vm is supported by ovirt, or is it planned to be? -- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr --------------080308040608050209070102 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <font size="-1">Hello,<br> <br> Is hot add ram to a vm is supported by ovirt, or is it planned to be?<br> </font> <pre class="moz-signature" cols="72">-- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 <a class="moz-txt-link-abbreviated" href="mailto:blanchet@abes.fr">blanchet(a)abes.fr</a> </pre> </body> </html> --------------080308040608050209070102--

9 9

[Users] all-in-one: adding nodes, HA
by Vesa Alho 16 Dec '13

16 Dec '13

Hi, I've been searching archives, but didn't find a definitive answers so decided to ask here. Question 1: all-in-one: adding nodes In case I use all-in-one installation, is it possible to add more nodes? I would be using shared iSCSI storage. What I understand, in order to use multiple physical servers, I need to dedicate one for management? Question 2: High Availability What I need to do in practice to get high availability between two virtual machines? I tried to search for guides. Do I need setup some watchdog devices and daemons? -Mr. Vesa Alho BTW, does Ovirt FAQ exists yet? My questions would be basic FAQ material. I can help out with Wiki if needed.

3 2

[Users] [Bug] Ubuntu 12.04.3 LTS Server does not start with CD attached
by Sven Kieske 16 Dec '13

16 Dec '13

Hi, I created a BZ with very detailed information: https://bugzilla.redhat.com/show_bug.cgi?id=1038121 tl;dr: The above mentioned OS does not start correctly if you attach a cd-rom to it, this includes submitting meta-data via Cloud-Init. The System hangs during the boot-process. I couldn't reproduce this with Ubuntu 13.10, but I have to get Ubuntu 12.04 LTS running with Cloud-Init. I did not find any hint in the Ubuntu log files to the causes of behaviour. You find most of the relevant log files in the BZ. The System boots fine if you eject the cd via webadmin. It seems not to get removed automatically when you shutdown the machine. Did anybody else run into this issue? Any help would be appreciated. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 2

[Users] Blank web page after database migration
by Rob Abshear 16 Dec '13

16 Dec '13

This is a multi-part message in MIME format. --------------070507000700030702090908 Content-Type: text/plain; charset=US-ASCII; format=flowed I followed the instructions from the following URLs http://www.ovirt.org/User:Adrian15/oVirt_engine_migration http://www.ovirt.org/Backup_engine_db I backed up and restored the certificates and the configuration without any issues. But the DB restore in the first set of instructions did not work for me. So I used the method in the second document to backup and restore the DB. I wasn't able to perform the "Update encrypted password" step in the first document, because that script does not exist. However, further down the document, it states that, "You can avoid this editing by choosing same password at both managers (old one and new one". So I am assuming I am OK there. Not enough information to know that, though. The issue I'm having is that, when I browse into the new controller, the page loads, but it's completely blank. No errors or anything. All the services seem to be running normally on the controller. I feel like I'm close. What am I missing? -- *NADA Convention & Expo*: January 24-27, 2014 - New Orleans, LA - Booth 5001 <http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…><http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…> --------------070507000700030702090908 Content-Type: text/html; charset=US-ASCII Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"content-type" content=3D"text/html; charset=3DISO-8= 859-1"> </head> <body text=3D"#000000" bgcolor=3D"#FFFFFF"> I followed the instructions from the following URLs<br> <br> <a href=3D"http://www.ovirt.org/User:Adrian15/oVirt_engine_migration">h= ttp://www.ovirt.org/User:Adrian15/oVirt_engine_migration</a><br> <br> <a href=3D"http://www.ovirt.org/Backup_engine_db">http://www.ovirt.org/= Backup_engine_db</a><br> <br> I backed up and restored the certificates and the configuration without any issues.  But the DB restore in the first set of instructions did not work for me. So I used the method in the second document to backup and restore the DB.<br> <br> I wasn't able to perform the "Update encrypted password" step in the first document, because that script does not exist.  However, further down the document, it states that, <big>"</big>You can avoid this editing by choosing same password at both managers (old one and new one".  So I am assuming I am OK there.  Not enoug= h information to know that, though.<br> <br> The issue I'm having is that, when I browse into the new controller, the page loads, but it's completely blank.  No errors or anything.=   All the services seem to be running normally on the controller.  I feel like I'm close.  What am I missing?<br> <meta http-equiv=3D"content-type" content=3D"text/html; charset=3DISO-8859-1"> <span style=3D"font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: 20px; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; background-color: rgb(255, 255, 255); display: inline ! important; float: none;"></span> </body> </html> <br> <img src=3D"http://goo.gl/NKPFh"><br><br><div><b style=3D"font-family:Arial= ;font-size:small">NADA Convention & Expo</b><span style=3D"font-family:= Arial;font-size:small">:  January 24-27, 2014 - New Orleans, LA - Boot= h 5001</span></div><a href=3D"http://www.bbb.org/south-east-florida/busines= s-reviews/advertising-agencies/citytwist-in-boca-raton-fl-90033448" target= =3D"_blank"><img src=3D"http://goo.gl/63JJt" style=3D"font-size:1.3em"></a>= <a href=3D"http://www.bbb.org/south-east-florida/business-reviews/advertisi= ng-agencies/citytwist-in-boca-raton-fl-90033448" target=3D"_blank"><img src= =3D"http://seal-seflorida.bbb.org/seals/blue-seal-96-50-citytwist-90033448.= png"></a> --------------070507000700030702090908--

3 2

[Users] OVF on any domain feature overview
by Tal Nisan 16 Dec '13

16 Dec '13

------=_Part_31767801_1250143639.1387196485660 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit The following is a new meeting request: Subject: OVF on any domain feature overview Organizer: "Tal Nisan" <tnisan(a)redhat.com> Time: Monday, December 23, 2013, 6:00:00 PM - 6:30:00 PM GMT +02:00 Jerusalem Invitees: users(a)ovirt.org; arch(a)ovirt.org *~*~*~*~*~*~*~*~*~* Etherpad link: http://etherpad.ovirt.org/p/OvfOnAnyDomain Intercall Conf ID: 8425973915# Reservationless-Plus Toll Free Dial-In Number (US & Canada): (800) 451-8679 Reservationless-Plus International Dial-In Number: (212) 729-5016 Reservationless-Plus Israel dial in - 1809462557 ------=_Part_31767801_1250143639.1387196485660 Content-Type: text/calendar; charset=utf-8; method=REQUEST; name=meeting.ics Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Jerusalem BEGIN:STANDARD DTSTART:16010101T020000 TZOFFSETTO:+0200 TZOFFSETFROM:+0300 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=10;BYDAY=-1SU TZNAME:IST END:STANDARD BEGIN:DAYLIGHT DTSTART:16010101T020000 TZOFFSETTO:+0300 TZOFFSETFROM:+0200 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=3;BYDAY=-1FR TZNAME:IDT END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT UID:9ae3b1f8-1ef8-41c5-8f6d-eec4344010bc SUMMARY:OVF on any domain feature overview ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:users@o virt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:arch@ov irt.org ORGANIZER;CN=Tal Nisan:mailto:tnisan@redhat.com DTSTART;TZID="Asia/Jerusalem":20131223T180000 DTEND;TZID="Asia/Jerusalem":20131223T183000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20131216T122125Z DTSTAMP:20131216T122125Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: OVF on any d omain feature overview \nOrganizer: "Tal Nisan" <tnisan(a)redhat.com> \n\nTime : Monday\, December 23\, 2013\, 6:00:00 PM - 6:30:00 PM GMT +02:00 Jerusalem \n \nInvitees: users(a)ovirt.org\; arch(a)ovirt.org \n\n\n*~*~*~*~*~*~*~*~*~*\n\ nEtherpad link: http://etherpad.ovirt.org/p/OvfOnAnyDomain \n\nIntercall Con f ID: 8425973915# \n\nReservationless-Plus Toll Free Dial-In Number (US & Ca nada): (800) 451-8679 \nReservationless-Plus International Dial-In Number: ( 212) 729-5016 \nReservationless-Plus Israel dial in - 1809462557 \n BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR ------=_Part_31767801_1250143639.1387196485660--

1 0

Re: [Users] moving ovirt controller
by Vered Volansky 16 Dec '13

16 Dec '13

Hi Rob, What you need to do is upgrade the engine using engine-setup and the SHA of the version you want. If you have the rpm for the newer version use it with engine-seyup. If not, you'll have to build on your own, the use engine-setup. Then you can migrate the DB. This, BTW, is highly not recommended, though this is the way to work. It's recommended to work with stable versions. Let me know us this works for you. Regards, Vered ----- Original Message ----- > From: "Rob Abshear" <rabshear(a)citytwist.net> > To: "Vered Volansky" <vered(a)redhat.com> > Sent: Wednesday, December 11, 2013 3:43:50 PM > Subject: Re: [Users] moving ovirt controller > > I just want to move the current controller to new hardware. That is my > goal. My issue, if I may re-explain it, is that the package versions on > the current controller are older than those on the new controller. The > research I have done regarding migrating a controller is that the > package versions must be the same in order for the database to migrate > correctly. I have attempted to backup the database and restore it with > the version differences, and it does restore, but the web interface is > blank. Maybe I'm just missing something. I have been following the > instructions at this URL: > http://www.ovirt.org/User:Adrian15/oVirt_engine_migration > <http://www.ovirt.org/User:Adrian15/oVirt_engine_migration#Original_package_…> > > > On 12/11/2013 07:36 AM, Vered Volansky wrote: > > Ohad, can you have a look? > > > > ----- Original Message ----- > >> From: "Vered Volansky" <vered(a)redhat.com> > >> To: "Rob Abshear" <rabshear(a)citytwist.net> > >> Cc: users(a)ovirt.org > >> Sent: Wednesday, December 11, 2013 2:31:10 PM > >> Subject: Re: [Users] moving ovirt controller > >> > >> I'm not sure what is it that you'd like to accomplish. > >> You mention a DB and then packaging. > >> Do you just want the current DB working in the new server? > >> If so just restore it and upgrade (packaging/dbscripts/upgrade.sh). > >> > >> In case this is not what you mean, maybe another eye on this would help, > >> Ohad? > >> > >> > >> > >> ----- Original Message ----- > >>> From: "Rob Abshear" <rabshear(a)citytwist.net> > >>> To: users(a)ovirt.org > >>> Sent: Wednesday, December 11, 2013 12:54:47 AM > >>> Subject: [Users] moving ovirt controller > >>> > >>> I am running > >>> ovirt-engine-3.4.0-0.2.master.20131107144332.git214186b.fc18.noarch on a > >>> server and I want to move it to another physical server. I did a fresh > >>> install on the new server and it is running > >>> ovirt-engine-3.4.0-0.2.master.20131119150718.git949cac2.fc18.noarch. I > >>> want to migrate the database from the old server to the new server. How > >>> can I upgrade the old server so that the package versions match the new > >>> server? Or, how can I downgrade the new server so that the packages > >>> match the old server? > >>> > >>> -- > >>> > >>> > >>> *NADA Convention & Expo*: January 24-27, 2014 - New Orleans, LA - Booth > >>> 5001 > >>> <http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…><http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…> > >>> _______________________________________________ > >>> Users mailing list > >>> Users(a)ovirt.org > >>> http://lists.ovirt.org/mailman/listinfo/users > >>> > >> _______________________________________________ > >> Users mailing list > >> Users(a)ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > >> > > > -- > > > *NADA Convention & Expo*: January 24-27, 2014 - New Orleans, LA - Booth > 5001 > <http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…><http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…> >

3 2

[Users] Sanlock / selinux
by Johan Kooijman 16 Dec '13

16 Dec '13

Hey all, When I try do a migration from one node to another (ovirt 3.3 centos, ovirt-node 3.0.1 centos), I'm getting the following error: 2013-12-13 13:09:42.108+0000: 11887: error : virCommandHandshakeWait:2554 : internal error Failed to open socket to sanlock daemon: Permission denied This can be resolved by executing: [root@hv1 ~]# setsebool -P virt_use_sanlock=on [root@hv1 ~]# setsebool -P virt_use_nfs=on But it's not persistent after a reboot. How can I make that a persistent setting? -- Met vriendelijke groeten / With kind regards, Johan Kooijman T +31(0) 6 43 44 45 27 F +31(0) 162 82 00 01 E mail(a)johankooijman.com

1 0

Re: [Users] Ovirt Engine Memory usage going crazy since 3.3 Upgrade
by Sahina Bose 16 Dec '13

16 Dec '13

This is a multi-part message in MIME format. --------------030906060700050207060901 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit [Adding ovirt users] On 12/12/2013 12:09 PM, squadra wrote: > Hello Sahina, > > CentOS 6.5 > > [root@ovirt:~]$ rpm -aq |grep jdk > java-1.6.0-openjdk-1.6.0.0-1.66.1.13.0.el6.x86_64 > java-1.7.0-openjdk-1.7.0.45-2.4.3.3.el6.x86_64 > [root@ovirt:~]$ > > > 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013 x86_64 > x86_64 x86_64 GNU/Linux > > > its running inside vmware esx, if that matters? also, previosly it was > a 3.2 installation based on dreyous rpms, dunno if that could be the > root cause? > > currently the vm is able to use up to 8gb with 4 cores, running alone > on the host. but engine is able to eat 8gb and 12gb of swap. > > pmap output is here (not going crazy right now, since i restarted it a > few minutes ago) > > http://pastebin.com/fuNEZqMA > This looks very similar to https://bugzilla.redhat.com/show_bug.cgi?id=1028966. Please use workaround in comment 27. > > Cheers, > > Jürgen > > > > On Thu, Dec 12, 2013 at 7:32 AM, Sahina Bose <sabose(a)redhat.com > <mailto:sabose@redhat.com>> wrote: > > > On 12/12/2013 11:43 AM, squadra wrote: >> Hi, >> >> i upgraded my Ovirt 3.2 a few days ago, with 3.2 memory usage was >> within a level i rated as normal (~3gb mem used, for controlling >> 6 nodes with about 30 vm on them). after 3.3.1 upgrade, the >> engine goes crazy and uses about 3x of memory after some hours. >> right after starting ovirt-engine, everything is fine, after >> about 20hrs the host starts swapping etc >> >> heres the process in "crazy state" >> >> ovirt 8749 107 59.2 10592340 4776040 ? Sl Dec10 2189:35 >> ovirt-engine -server -XX:+TieredCompilation -Xms1g -Xmx1g >> -XX:PermSize=256m -XX:MaxPermSize=256m >> -Djava.net.preferIPv4Stack=true -Dsun.rmi.dgc.client.gcInterva >> >> here right now after a restart >> >> ovirt 28350 43.7 8.7 3895304 705964 ? Sl 07:09 1:09 >> ovirt-engine -server -XX:+TieredCompilation -Xms1g -Xmx1g >> -XX:PermSize=256m -XX:MaxPermSize=256m >> -Djava.net.preferIPv4Stack=true -Dsun.rmi.dgc.client.gcInterval >> >> also, the webinterface is getting really laggy after a few hours >> of runtime (already before the host starts swapping). >> >> anyone got an idea what is causing this? which logs should i >> provide to dig further into this? > > Which OS are you running on? And which version of java? > > Could you attach the output of pmap <ovirt process id> ? > >> >> thanks & cheers, >> >> >> Juergen >> >> -- >> Sent from the Delta quadrant using Borg technology! >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org <mailto:Users@ovirt.org> >> http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > Sent from the Delta quadrant using Borg technology! --------------030906060700050207060901 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> [Adding ovirt users]<br> <br> <div class="moz-cite-prefix">On 12/12/2013 12:09 PM, squadra wrote:<br> </div> <blockquote cite="mid:CABx==A38KiFoULPBvPPWGYzsW+3=zGY++dGB-dZxEoe+8ocNzw@mail.gmail.com" type="cite"> <div dir="ltr">Hello Sahina, <div><br> </div> <div>CentOS 6.5 </div> <div><br> </div> <div> <div>[root@ovirt:~]$ rpm -aq |grep jdk</div> <div>java-1.6.0-openjdk-1.6.0.0-1.66.1.13.0.el6.x86_64</div> <div>java-1.7.0-openjdk-1.7.0.45-2.4.3.3.el6.x86_64</div> <div>[root@ovirt:~]$</div> </div> <div><br> </div> <div><br> </div> <div> <div> 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux</div> </div> <div><br> </div> <div><br> </div> <div>its running inside vmware esx, if that matters? also, previosly it was a 3.2 installation based on dreyous rpms, dunno if that could be the root cause?</div> <div><br> </div> <div>currently the vm is able to use up to 8gb with 4 cores, running alone on the host. but engine is able to eat 8gb and 12gb of swap.</div> <div><br> </div> <div>pmap output is here (not going crazy right now, since i restarted it a few minutes ago)</div> <div><br> </div> <div><a moz-do-not-send="true" href="http://pastebin.com/fuNEZqMA">http://pastebin.com/fuNEZqMA</a><br> </div> <div><br> </div> </div> </blockquote> <br> This looks very similar to <a class="moz-txt-link-freetext" href="https://bugzilla.redhat.com/show_bug.cgi?id=1028966">https://bugzilla.redhat.com/show_bug.cgi?id=1028966</a>.<br> <br> Please use workaround in comment 27.<br> <br> <blockquote cite="mid:CABx==A38KiFoULPBvPPWGYzsW+3=zGY++dGB-dZxEoe+8ocNzw@mail.gmail.com" type="cite"> <div dir="ltr"> <div><br> </div> <div>Cheers,</div> <div><br> </div> <div>Jürgen</div> <div><br> </div> </div> <div class="gmail_extra"> <br> <br> <div class="gmail_quote">On Thu, Dec 12, 2013 at 7:32 AM, Sahina Bose <span dir="ltr"><<a moz-do-not-send="true" href="mailto:sabose@redhat.com" target="_blank">sabose(a)redhat.com</a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div bgcolor="#FFFFFF" text="#000000"> <div> <div class="h5"> <br> <div>On 12/12/2013 11:43 AM, squadra wrote:<br> </div> <blockquote type="cite"> <div dir="ltr">Hi, <div><br> </div> <div>i upgraded my Ovirt 3.2 a few days ago, with 3.2 memory usage was within a level i rated as normal (~3gb mem used, for controlling 6 nodes with about 30 vm on them). after 3.3.1 upgrade, the engine goes crazy and uses about 3x of memory after some hours. right after starting ovirt-engine, everything is fine, after about 20hrs the host starts swapping etc</div> <div><br> </div> <div>heres the process in "crazy state"</div> <div><br> </div> <div>ovirt 8749 107 59.2 10592340 4776040 ? Sl Dec10 2189:35 ovirt-engine -server -XX:+TieredCompilation -Xms1g -Xmx1g -XX:PermSize=256m -XX:MaxPermSize=256m -Djava.net.preferIPv4Stack=true -Dsun.rmi.dgc.client.gcInterva<br clear="all"> <div><br> </div> <div>here right now after a restart</div> <div><br> </div> <div>ovirt 28350 43.7 8.7 3895304 705964 ? Sl 07:09 1:09 ovirt-engine -server -XX:+TieredCompilation -Xms1g -Xmx1g -XX:PermSize=256m -XX:MaxPermSize=256m -Djava.net.preferIPv4Stack=true -Dsun.rmi.dgc.client.gcInterval<br> </div> <div><br> </div> <div>also, the webinterface is getting really laggy after a few hours of runtime (already before the host starts swapping).</div> <div><br> </div> <div>anyone got an idea what is causing this? which logs should i provide to dig further into this?</div> </div> </div> </blockquote> <br> </div> </div> Which OS are you running on? And which version of java?<br> <br> Could you attach the output of pmap <ovirt process id> ?<br> <br> <blockquote type="cite"> <div class="im"> <div dir="ltr"> <div> <div><br> </div> <div>thanks & cheers,</div> <div><br> </div> <div><br> </div> <div>Juergen</div> <div><br> </div> -- <br> <pre>Sent from the Delta quadrant using Borg technology!</pre> </div> </div> <br> <fieldset></fieldset> <br> </div> <pre>_______________________________________________ Users mailing list <a moz-do-not-send="true" href="mailto:Users@ovirt.org" target="_blank">Users(a)ovirt.org</a> <a moz-do-not-send="true" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank">http://lists.ovirt.org/mailman/listinfo/users</a> </pre> </blockquote> <br> </div> </blockquote> </div> <br> <br clear="all"> <div><br> </div> -- <br> <pre>Sent from the Delta quadrant using Borg technology!</pre> </div> </blockquote> <br> </body> </html> --------------030906060700050207060901--

4 3

[Users] VM with stateless snapshot won't start
by Martijn Grendelman 16 Dec '13

16 Dec '13

Hi, After maintenance on a host, I am trying to start a VM that has been running statelessly for a while. It refuses to start and Engine logs the following: 2013-12-05 11:59:18,125 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (pool-6-thread-48) Correlation ID: 43d49965, Job ID: 0d943a6d-9d65-4ac1-89b7-139d30b4813c, Call Stack: null, Custom Event ID: -1, Message: Failed to start VM WinXP, because exist snapshot for stateless state. Snapshot will be deleted. Should I submit a bug report for the poor English in this log line? ;-) The 'Snapshots' tab for the VM doesn't show anything, but repeated attempts to start the VM just show the same message in the log. What can I do to start this VM? Cheers, Martijn.

2 1

[Users] How to - gluster
by tristano82＠libero.it 16 Dec '13

16 Dec '13

i have 1 phisical node with SSD disks, can i install ovirt with glusterFS storage as backend . In a second time add new ovirt node ( same hardware ) and attach to the first 1 to create a compute and storage HA ? thanks marco

2 1

[Users] sanlock exception
by Pascal Jakobi 16 Dec '13

16 Dec '13

*Hi* *I have an engine on one side, a F18 host on the other.* *On the F18 host, I created a share - nfs works ok :* *[root@lab1 ovirt-engine]# showmount -e lab2.homeExport list for lab2.home:/home/vdsm/data *[root@lab1 ovirt-engine]#* *On the console, I create a storage domain that uses host lab2 and lab2.home:/home/vdsm/data.* *Error : "Failed to attach domain storage"* *Looking further in engine.log/vdsm.log I can see some sanlock excpetions....* *Has someone a clue ?* *Thxs* *P*

2 1

Re: [Users] backups
by Martijn Grendelman 16 Dec '13

16 Dec '13

Hi Charles, > How are you folks doing your hypervisor level backups? > > Under ESXi I used GhettoVCB which basically took a snap shot, copied the > disk image to another location, then deleted the snap. Thank you for this hint, I didn't know about GhettoVCB and I'm definately going to have a look at it. > I haven't been able to find too much information on how this can be done > with ovirt. I see discussions on the new backup API, but I'm not > interested in spending big bucks on an enterprise backup solution for a > home lab. > > Only discussion I saw on using snapshots for backups said don't do it > because the tools don't sync memory when the snapshots are taken. The problem with snapshot-based backups is, that they are usually only crash-consistent, meaning that they contain the state of a system's disks as they would be if you pulled the power plug on a server. If you restore a system from this type of backup, you would see file system recovery happening at the first boot, and you risk data loss from -for example- database servers. The process that GhettoVCB uses according to your description above is the same. Your backups are only crash-consistent. If you need application-level consistency, you need a mechanism to inform applications that a backup is going to take place (or rather: a snapshot will be taken) and that they should place themselves in a consistent state. For example: sync data to disk, flush transaction logs, stuff like that. Microsoft Windows has VSS for that. For Linux, there is no such thing (that I know of). Common practice for "quiescing" database servers and such on Linux is making consistent SQL dumps in a pre-backup job. I my case, for most guests a crash-consistent backup, containing a recent MySQL or PostgreSQL dump is sufficient. I use LVM snapshots (not oVirt snapshots) for backups, and I use Rsync to transfer the data. I have been experimenting with Virtsync [1], but I'm having a bit of trouble with that, so for the moment, it's just Rsync. Efficiently backing up sparse images with Rsync can be a bit of a challenge (that's why Virtsync was created in the first place, IIRC), but using '--sparse' on the inital backup and '--inplace' on subsequent backups seems to do the trick. [1] http://www.virtsync.com/ I hope this helps. Cheers, Martijn.

4 4

[Users] virtio-rng / crypto inside vms
by Sven Kieske 15 Dec '13

15 Dec '13

Hi, I'm just wondering: How is the state of the virtio-rng implementation? I'm asking because I need to regenerate ssh host keys in newly deployed vms. (I seem to be the only person, or everybody else has found the solution, or nobody thinks about security, or a mixture of the above?) Additional I found no really guidance on how much entropy bits should be available to generate a secure key inside a vm, beside these numbers: http://www.ietf.org/rfc/rfc1750.txt suggests about 128 bits of entropy for a single cryptographic operation. various other sources mention ranges between 100-200 or even at least 4096 entropy bits. Would it be a workaround to add a virtual sound device and use this one for /dev/random ? (But it would be useless if you have no real sound hardware I guess). Additional when you want to regenerate host keys in e.g. Ubuntu 3 Keys get generated so you need even more entropy to be on the save side. If you got any links to best practices or some good news regarding the state of virtio-rng that would be awesome. Currently my vms have around 130-160 entropy bits available. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

3 3

Re: [Users] SpiceHTML5, noVNC console and Spice Proxy mixable?
by Nicholas Kesick 15 Dec '13

15 Dec '13

--_F5DD8618-2DC8-4F8A-8D61-6C31F8DFA901_ Content-Transfer-Encoding: base64 Content-Type: text/plain; charset="utf-8" LS0tLS0gT3JpZ2luYWwgTWVzc2FnZSAtLS0tLQ0KPiBGcm9tOiAiR2lhbmx1Y2EgQ2VjY2hpIiA8 Z2lhbmx1Y2EuY2VjY2hpQGdtYWlsLmNvbT4NCj4gVG86ICJBbG9uIEJhci1MZXYiIDxhbG9uYmxA cmVkaGF0LmNvbT4NCj4gQ2M6ICJGcmFudGlzZWsgS29iemlrIiA8ZmtvYnppa0ByZWRoYXQuY29t PiwgInVzZXJzIiA8dXNlcnNAb3ZpcnQub3JnPg0KPiBTZW50OiBTYXR1cmRheSwgRGVjZW1iZXIg MTQsIDIwMTMgMTI6MDg6MzkgQU0NCj4gU3ViamVjdDogUmU6IFtVc2Vyc10gU3BpY2VIVE1MNSwg bm9WTkMgY29uc29sZSBhbmQgU3BpY2UgUHJveHkgbWl4YWJsZT8NCj4gDQo+IE9uIEZyaSwgRGVj IDEzLCAyMDEzIGF0IDU6NTcgUE0sIEFsb24gQmFyLUxldiB3cm90ZToNCj4gDQoNCjxzbmlwPg0K DQo+IEJ1dCB0aGlzIG1lYW5zIHRoYXQgd2hhdCBkb2N1bWVudGVkIGhlcmUsIHRoYXQgd2FzIHdo YXQgSSBmb2xsb3dlZA0KPiBzb21lIHdlZWtzIGFnbywgaXMgaW5jb21wbGV0ZToNCj4gaHR0cDov L3d3dy5vdmlydC5vcmcvRmVhdHVyZXMvbm9WTkNfY29uc29sZSNTZXR1cF9XZWJzb2NrZXRfUHJv eHlfb25fdGhlX0VuZ2luZ19Qb3N0X0luc3RhbGwNCj4gDQoNCkkganVzdCBjb3JyZWN0ZWQgdGhl IHNwZWxsaW5nIG9mIOKAnEVuZ2luZeKAnSwgc28gdGhhdCBsaW5rIHNob3VsZCBub3cgYmUgaHR0 cDovL3d3dy5vdmlydC5vcmcvRmVhdHVyZXMvbm9WTkNfY29uc29sZSNTZXR1cF9XZWJzb2NrZXRf UHJveHlfb25fdGhlX0VuZ2luZV9Qb3N0X0luc3RhbGwNCj4gPw0KDQpIbW1tLi4uIGJlY2F1c2Ug b2YgdGhhdCBJIGhhdGUgbm9uIGZvcm1hbCB3aWtpIGRvY3VtZW50YXRpb24uLi4gaGFyZCB0byBj aGFzZSBhbGwgdmFyaWFudC4NCg0KSSBmaXhlZCBpdC4NCg0KVGhhbmtzIQ0KQWxvbg0KX19fX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX18NClVzZXJzIG1haWxpbmcg bGlzdA0KVXNlcnNAb3ZpcnQub3JnDQpodHRwOi8vbGlzdHMub3ZpcnQub3JnL21haWxtYW4vbGlz dGluZm8vdXNlcnM= --_F5DD8618-2DC8-4F8A-8D61-6C31F8DFA901_ Content-Transfer-Encoding: base64 Content-Type: text/html; charset="utf-8" CjxodG1sPgo8aGVhZD4KPG1ldGEgbmFtZT0iZ2VuZXJhdG9yIiBjb250ZW50PSJXaW5kb3dzIE1h aWwgMTcuNS45NjAwLjIwMzE1Ij4KPHN0eWxlPjwhLS0KLkVtYWlsUXVvdGUgewptYXJnaW4tbGVm dDoxcHQ7CnBhZGRpbmctbGVmdDo0cHQ7CmJvcmRlci1sZWZ0OiM4MDAwMDAgMnB4IHNvbGlkOwp9 Ci0tPjwvc3R5bGU+PHN0eWxlIGRhdGEtZXh0ZXJuYWxzdHlsZT0idHJ1ZSI+PCEtLQpwLk1zb0xp c3RQYXJhZ3JhcGgsIGxpLk1zb0xpc3RQYXJhZ3JhcGgsIGRpdi5Nc29MaXN0UGFyYWdyYXBoIHsK bWFyZ2luLXRvcDowaW47Cm1hcmdpbi1yaWdodDowaW47Cm1hcmdpbi1ib3R0b206MGluOwptYXJn aW4tbGVmdDouNWluOwptYXJnaW4tYm90dG9tOi4wMDAxcHQ7Cn0KcC5Nc29Ob3JtYWwsIGxpLk1z b05vcm1hbCwgZGl2Lk1zb05vcm1hbCB7Cm1hcmdpbjowaW47Cm1hcmdpbi1ib3R0b206LjAwMDFw dDsKfQpwLk1zb0xpc3RQYXJhZ3JhcGhDeFNwRmlyc3QsIGxpLk1zb0xpc3RQYXJhZ3JhcGhDeFNw Rmlyc3QsIGRpdi5Nc29MaXN0UGFyYWdyYXBoQ3hTcEZpcnN0LCAKcC5Nc29MaXN0UGFyYWdyYXBo Q3hTcE1pZGRsZSwgbGkuTXNvTGlzdFBhcmFncmFwaEN4U3BNaWRkbGUsIGRpdi5Nc29MaXN0UGFy YWdyYXBoQ3hTcE1pZGRsZSwgCnAuTXNvTGlzdFBhcmFncmFwaEN4U3BMYXN0LCBsaS5Nc29MaXN0 UGFyYWdyYXBoQ3hTcExhc3QsIGRpdi5Nc29MaXN0UGFyYWdyYXBoQ3hTcExhc3QgewptYXJnaW4t dG9wOjBpbjsKbWFyZ2luLXJpZ2h0OjBpbjsKbWFyZ2luLWJvdHRvbTowaW47Cm1hcmdpbi1sZWZ0 Oi41aW47Cm1hcmdpbi1ib3R0b206LjAwMDFwdDsKbGluZS1oZWlnaHQ6MTE1JTsKfQotLT48L3N0 eWxlPjwvaGVhZD4KPGJvZHkgZGlyPSJsdHIiPgo8ZGl2IGRhdGEtZXh0ZXJuYWxzdHlsZT0iZmFs c2UiIGRpcj0ibHRyIiBzdHlsZT0iZm9udC1mYW1pbHk6ICdDYWxpYnJpJywgJ1NlZ29lIFVJJywg J01laXJ5bycsICdNaWNyb3NvZnQgWWFIZWkgVUknLCAnTWljcm9zb2Z0IEpoZW5nSGVpIFVJJywg J01hbGd1biBHb3RoaWMnLCAnc2Fucy1zZXJpZic7Zm9udC1zaXplOjEycHQ7Ij48ZGl2PgoKLS0t LS0gT3JpZ2luYWwgTWVzc2FnZSAtLS0tLTxicj4KJmd0OyBGcm9tOiAiR2lhbmx1Y2EgQ2VjY2hp IiAmbHQ7Z2lhbmx1Y2EuY2VjY2hpQGdtYWlsLmNvbSZndDs8YnI+CiZndDsgVG86ICJBbG9uIEJh ci1MZXYiICZsdDthbG9uYmxAcmVkaGF0LmNvbSZndDs8YnI+CiZndDsgQ2M6ICJGcmFudGlzZWsg S29iemlrIiAmbHQ7ZmtvYnppa0ByZWRoYXQuY29tJmd0OywgInVzZXJzIiAmbHQ7dXNlcnNAb3Zp cnQub3JnJmd0Ozxicj4KJmd0OyBTZW50OiBTYXR1cmRheSwgRGVjZW1iZXIgMTQsIDIwMTMgMTI6 MDg6MzkgQU08YnI+CiZndDsgU3ViamVjdDogUmU6IFtVc2Vyc10gU3BpY2VIVE1MNSwgbm9WTkMg Y29uc29sZSBhbmQgU3BpY2UgUHJveHkgbWl4YWJsZT88YnI+CiZndDsgPGJyPgomZ3Q7IE9uIEZy aSwgRGVjIDEzLCAyMDEzIGF0IDU6NTcgUE0sIEFsb24gQmFyLUxldiB3cm90ZTo8YnI+CiZndDsg PGJyPgo8YnI+CiZsdDtzbmlwJmd0Ozxicj4KPGJyPgomZ3Q7IEJ1dCB0aGlzIG1lYW5zIHRoYXQg d2hhdCBkb2N1bWVudGVkIGhlcmUsIHRoYXQgd2FzIHdoYXQgSSBmb2xsb3dlZDxicj4KJmd0OyBz b21lIHdlZWtzIGFnbywgaXMgaW5jb21wbGV0ZTo8YnI+CiZndDsgPGEgaHJlZj0iaHR0cDovL3d3 dy5vdmlydC5vcmcvRmVhdHVyZXMvbm9WTkNfY29uc29sZSNTZXR1cF9XZWJzb2NrZXRfUHJveHlf b25fdGhlX0VuZ2luZ19Qb3N0X0luc3RhbGwiIHRhcmdldD0iX3BhcmVudCI+aHR0cDovL3d3dy5v dmlydC5vcmcvRmVhdHVyZXMvbm9WTkNfY29uc29sZSNTZXR1cF9XZWJzb2NrZXRfUHJveHlfb25f dGhlX0VuZ2luZ19Qb3N0X0luc3RhbGw8L2E+PGJyPgomZ3Q7IDwvZGl2PjxkaXY+SSBqdXN0IGNv cnJlY3RlZCB0aGUgc3BlbGxpbmcgb2YmbmJzcDvigJxFbmdpbmXigJ0sIHNvIHRoYXQgbGluayBz aG91bGQgbm93IGJlIDxhIGhyZWY9Imh0dHA6Ly93d3cub3ZpcnQub3JnL0ZlYXR1cmVzL25vVk5D X2NvbnNvbGUjU2V0dXBfV2Vic29ja2V0X1Byb3h5X29uX3RoZV9FbmdpbmVfUG9zdF9JbnN0YWxs IiB0YXJnZXQ9Il9wYXJlbnQiPmh0dHA6Ly93d3cub3ZpcnQub3JnL0ZlYXR1cmVzL25vVk5DX2Nv bnNvbGUjU2V0dXBfV2Vic29ja2V0X1Byb3h5X29uX3RoZV9FbmdpbmVfUG9zdF9JbnN0YWxsPC9h Pjxicj4KJmd0OyA/PGJyPgo8YnI+CkhtbW0uLi4gYmVjYXVzZSBvZiB0aGF0IEkgaGF0ZSBub24g Zm9ybWFsIHdpa2kgZG9jdW1lbnRhdGlvbi4uLiBoYXJkIHRvIGNoYXNlIGFsbCB2YXJpYW50Ljxi cj4KPGJyPgpJIGZpeGVkIGl0Ljxicj4KPGJyPgpUaGFua3MhPGJyPgpBbG9uPGJyPgpfX19fX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fXzxicj4KVXNlcnMgbWFpbGlu ZyBsaXN0PGJyPgpVc2Vyc0BvdmlydC5vcmc8YnI+CjxhIGhyZWY9Imh0dHA6Ly9saXN0cy5vdmly dC5vcmcvbWFpbG1hbi9saXN0aW5mby91c2VycyIgdGFyZ2V0PSJfcGFyZW50Ij5odHRwOi8vbGlz dHMub3ZpcnQub3JnL21haWxtYW4vbGlzdGluZm8vdXNlcnM8L2E+PGJyPjwvZGl2PgoKCgo8L2Rp dj4KPC9ib2R5Pgo8L2h0bWw+Cg== --_F5DD8618-2DC8-4F8A-8D61-6C31F8DFA901_--

1 0

[Users] SpiceHTML5, noVNC console and Spice Proxy mixable?
by Gianluca Cecchi 14 Dec '13

14 Dec '13

Hello, I already have a thread regarding SpiceHTML5 open and where I'm going to give further feedback as requested. In the mean time I would like to ask if the three features in the subject are completely mixable or not, as in the next days I'm going to test them all and I would like to start from consistent setup and not to give wrong answers based on wrong initial setup. If I understood correctly, both SpiceHTML5 and noVNC console are based on websocket proxy through the config parameter called WebSocketProxy and I can consolidate this proxy on the engine . SO that I can in the same environment use both. Correct? Coming then to Spice Proxy, managed by config parameter "SpiceProxyDefault", my questions are: - is it mixable with the two above or are they mutually exclusive? - can I configure the engine itself to be the proxy, installing squid on it? - If yes, what would be correct parameter for SpiceProxyDefault: localhost:3128 or engine_hostname.domainname:3128? If both are ok, I think it is more convenient to use localhost, correct? Thanks in advance, Gianluca

4 13

[Users] Can't add networks
by Rob Abshear 14 Dec '13

14 Dec '13

I have a brand spanking new installation. Fresh controllers and nodes. I have imported some machines and have them up and running. However, when I try to add any more networks to the nodes, I get a failure. The engine.log is giving the following failure: 2013-12-13 19:48:03,280 INFO [org.ovirt.engine.core.bll.network.host.SetupNetworksCommand] (ajp--127.0.0.1-8702-3) Running command: SetupNetworksCommand internal: false. Entities affected : ID: 185e8be6-5c9f-4ca2-a9b9-2dd49d6e6cfe Type: VDS 2013-12-13 19:48:03,282 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-3) START, SetupNetworksVDSCommand(HostName = Out-001, HostId = 185e8be6-5c9f-4ca2-a9b9-2dd49d6e6cfe, force=false, checkConnectivity=true, conectivityTimeout=120, networks=[Inside {id=b88e1266-d83f-4753-ac61-0c383f2ce607, description=Internal connections, comment=null, subnet=null, gateway=null, type=null, vlanId=null, stp=false, dataCenterId=5849b030-626e-47cb-ad90-3ce782d831b3, mtu=0, vmNetwork=true, cluster=NetworkCluster {id={clusterId=null, networkId=null}, status=OPERATIONAL, display=false, required=false, migration=false}, providedBy=null, label=null}], bonds=[], interfaces=[p2p1 {id=0f6b3543-7622-4d26-aab8-3524cab6b4db, vdsId=185e8be6-5c9f-4ca2-a9b9-2dd49d6e6cfe, name=p2p1, macAddress=00:13:3b:0e:08:93, networkName=Inside, bondName=null, bootProtocol=DHCP, address=, subnet=, gateway=null, mtu=0, bridged=true, speed=100, type=0, networkImplementationDetails=null}, em1 {id=57dae4a3-ba5a-430a-946e-5f087a33f761, vdsId=185e8be6-5c9f-4ca2-a9b9-2dd49d6e6cfe, name=em1, macAddress=00:19:b9:e3:63:e7, networkName=ovirtmgmt, bondName=null, bootProtocol=STATIC_IP, address=192.168.164.71, subnet=255.255.252.0, gateway=192.168.165.2, mtu=1500, bridged=true, speed=1000, type=2, networkImplementationDetails={inSync=true, managed=true}}, em2 {id=df35d1f8-1467-446a-8f93-e507f67379e7, vdsId=185e8be6-5c9f-4ca2-a9b9-2dd49d6e6cfe, name=em2, macAddress=00:19:b9:e3:63:e9, networkName=null, bondName=null, bootProtocol=DHCP, address=, subnet=, gateway=null, mtu=1500, bridged=false, speed=0, type=0, networkImplementationDetails=null}, p2p2 {id=4b747913-edc3-4f75-9c5b-a11f02f73536, vdsId=185e8be6-5c9f-4ca2-a9b9-2dd49d6e6cfe, name=p2p2, macAddress=00:13:3b:0e:08:94, networkName=null, bondName=null, bootProtocol=DHCP, address=, subnet=, gateway=null, mtu=1500, bridged=false, speed=1000, type=0, networkImplementationDetails=null}], removedNetworks=[], removedBonds=[]), log id: 93c1504 2013-12-13 19:48:03,296 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-3) FINISH, SetupNetworksVDSCommand, log id: 93c1504 2013-12-13 19:50:14,731 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-3) Failed in SetupNetworksVDS method 2013-12-13 19:50:14,732 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-3) Error code ERR_FAILED_IFUP and error message VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = Determining IP information for Inside... failed. 2013-12-13 19:50:14,735 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-3) org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = Determining IP information for Inside... failed. 2013-12-13 19:50:14,737 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-3) Command SetupNetworksVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = Determining IP information for Inside... failed. 2013-12-13 19:50:14,740 ERROR [org.ovirt.engine.core.bll.network.host.SetupNetworksCommand] (ajp--127.0.0.1-8702-3) Command org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = Determining IP information for Inside... failed. (Failed with error ERR_FAILED_IFUP and code 29) Any help would be appreciated. -- *NADA Convention & Expo*: January 24-27, 2014 - New Orleans, LA - Booth 5001 <http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…><http://www.bbb.org/south-east-florida/business-reviews/advertising-agencies…>

2 1