January 2014 - Users - oVirt List Archives

[Users] Networking questions (LONG)
by Alan Murrell 21 Jan '14

21 Jan '14

------_=_NextPart_001_01CF0D11.E17769E3 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I am evaluating oVirt as a replacement/alternative to VMware deployments = we typically do. I have installed and all-in-one setup on a test box = (which itself used to be an ESXi server), but it only has one NIC. I = trying to duplicate our typical configuration we do in VMware, which is = this: 1.) we create several "port groups" on the vSwitch, each assigned a = VLAN ID, such as: - VLAN001 (VLAN ID: 1) - VLAN002 (VLAN ID: 2) - VLAN009 (VLAN ID: 9) - VLAN010 (VLAN ID: 10) - VLAN200 (VLAN ID: 200) - TRUNK (VLAN ID: 4095 - in VMware-world, VLAN ID "4095" is "all = VLANS" and basically just passes the VLANs through to whatever is = attached to the port group for the VM to handle) 2.) We assign VMs to port groups appropriate for the VLAN they are = part of. 3.) The only VM that has a NIC assigned to the "TRUNK" port group is = the firewall (which is Linux), and we create VLAN interfaces on it = (i.e., "eth1.1", "eth1.2", "eth1.10", "eth1.200"). The firewall VM acts = as the router between the various VLANs. To replicate the above in oVirt, I created logical networks for each = VLAN, and assigned the appropriate VLAN ID. It seems oVirt/KVM does not = have an equivalent for VMware's VLAN ID of "4095", so after some = searching around, so for the "TRUNK" network, I left it with no VLAN = assigned. Because i cannot add VLAN and non-VLAN networks to the same = physical NIC, after some searching around, it looks like I may have to = utilise two NICS: one for the VLAN networks and one for the "TRUNK" = network. Because, at this point, I am not yet concerned with making the test VMs = I will be setting up be accessible from outside the virtual lab = environment (i.e., everything will communicate within my oVirt = server/network for now), I am trying to make use of "dummy" interfaces, = but I am not sure the best way to make use of this. I am able to create = the dummy* interfaces and have them show up in oVirt, but I am not sure = of how they should be setup. Here is what I am *thinking* should be = done, but want to make sure it is correct before getting too deep: - I will use the physical NIC for management, therefore the = "ovirtmgmt" bridge with eth0 assigned to it will remain as-is - Create two dummy interfaces: "dummy0" and "dummy1" - Create a new bridge, "ovirtvm" and assign "dummy0" and "dummy1" to = it - Attach the VLAN-enabled networks to "dummy0" - Attach the "TRUNK" network to "dummy1" Would the above be the way to go about this? The one thing I am not = sure of is whether or not having no VLAN assigned (on the "TRUNK" = network) accomplishes the same this as the "VLAN ID 4095" in VMware: = will oVirt/KVM just pass the traffic through for the VM attached to it = to deal with? Thanks for reading this far, and I appreciate any help you might be able = to lend in the above. -Alan ------_=_NextPart_001_01CF0D11.E17769E3 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version = 6.5.7654.12"> <TITLE>Networking questions (LONG)</TITLE> </HEAD> <BODY>  Hello, I am evaluating oVirt as a replacement/alternative to VMware deployments = we typically do.  I have installed and all-in-one setup on a test = box (which itself used to be an ESXi server), but it only has one = NIC.  I trying to duplicate our typical configuration we do in = VMware, which is this:   1.) we create several "port groups" on the vSwitch, = each assigned a VLAN ID, such as:       - VLAN001 (VLAN ID: 1)       - VLAN002 (VLAN ID: 2)       - VLAN009 (VLAN ID: 9)       - VLAN010 (VLAN ID: 10)       - VLAN200 (VLAN ID: 200)       - TRUNK (VLAN ID: 4095 - in VMware-world, = VLAN ID "4095" is "all VLANS" and basically just = passes the VLANs through to whatever is attached to the port group for = the VM to handle)   2.) We assign VMs to port groups appropriate for the VLAN they = are part of.   3.) The only VM that has a NIC assigned to the "TRUNK" = port group is the firewall (which is Linux), and we create VLAN = interfaces on it (i.e., "eth1.1", "eth1.2", = "eth1.10", "eth1.200").  The firewall VM acts = as the router between the various VLANs. To replicate the above in oVirt, I created logical networks for each = VLAN, and assigned the appropriate VLAN ID.  It seems oVirt/KVM = does not have an equivalent for VMware's VLAN ID of "4095", so = after some searching around, so for the "TRUNK" network, I = left it with no VLAN assigned.  Because i cannot add VLAN and = non-VLAN networks to the same physical NIC, after some searching around, = it looks like I may have to utilise two NICS: one for the VLAN networks = and one for the "TRUNK" network. Because, at this point, I am not yet concerned with making the test VMs = I will be setting up be accessible from outside the virtual lab = environment (i.e., everything will communicate within my oVirt = server/network for now), I am trying to make use of "dummy" = interfaces, but I am not sure the best way to make use of this.  I = am able to create the dummy* interfaces and have them show up in oVirt, = but I am not sure of how they should be setup.  Here is what I am = *thinking* should be done, but want to make sure it is correct before = getting too deep:   - I will use the physical NIC for management, therefore the = "ovirtmgmt" bridge with eth0 assigned to it will remain = as-is   - Create two dummy interfaces: "dummy0" and = "dummy1"   - Create a new bridge, "ovirtvm" and assign = "dummy0" and "dummy1" to it   - Attach the VLAN-enabled networks to "dummy0"   - Attach the "TRUNK" network to "dummy1" Would the above be the way to go about this?  The one thing I am = not sure of is whether or not having no VLAN assigned (on the = "TRUNK" network) accomplishes the same this as the "VLAN = ID 4095" in VMware: will oVirt/KVM just pass the traffic through = for the VM attached to it to deal with? Thanks for reading this far, and I appreciate any help you might be able = to lend in the above. -Alan </BODY> </HTML> ------_=_NextPart_001_01CF0D11.E17769E3--

7 14

[Users] Script to auto backup VMs
by Jairo Rizzo 21 Jan '14

21 Jan '14

Hello, Do you guys know of a script that I could use to backup VMs automatically but creating the lower downtime? I modified a bit the 'virt-backup.pl' script by Daniel Berteaud <daniel(a)firewall-services.com> so it authenticates against Ovirt as shown below: Sys::Virt::CRED_AUTHNAME, Sys::Virt::CRED_PASSPHRASE, However, wondering if I could get advice from you as to which tool or script will do this job better. Thanks --Rizzo

1 0

[Users] Feature Review: Gluster Volume Snapshot
by Shubhendu Tripathi 21 Jan '14

21 Jan '14

------=_Part_4459753_822472212.1390304404609 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit The following is a new meeting request: Subject: Feature Review: Gluster Volume Snapshot Organizer: "Shubhendu Tripathi" <shtripat(a)redhat.com> Location: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> Resources: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> Time: Monday, January 27, 2014, 6:30:00 PM - 7:30:00 PM GMT +05:30 Chennai, Kolkata, Mumbai, New Delhi Invitees: arch(a)ovirt.org; users(a)ovirt.org *~*~*~*~*~*~*~*~*~* Hi, In this talk I intend to present a short overview of the feature Gluster Volume Snapshots in oVirt. BlueJeans session details: https://bluejeans.com/298626980/6439/browser WIKI Page: http://www.ovirt.org/Features/GlusterVolumeSnapshots Call bridge details: Would be shared separately. Thanks and Regards, Shubhendu Tripathi ------=_Part_4459753_822472212.1390304404609 Content-Type: text/calendar; charset=utf-8; method=REQUEST; name=meeting.ics Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Kolkata BEGIN:STANDARD DTSTART:16010101T000000 TZOFFSETTO:+0530 TZOFFSETFROM:+0530 TZNAME:IST END:STANDARD END:VTIMEZONE BEGIN:VEVENT UID:3440764a-ef38-4491-a023-f369dcfe9a18 SUMMARY:Feature Review: Gluster Volume Snapshot LOCATION:"Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:arch@ov irt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:users@o virt.org ATTENDEE;CN=Vijayanagara - BLR;CUTYPE=RESOURCE;ROLE=NON-PARTICIPANT;PARTSTAT =NEEDS-ACTION;RSVP=TRUE:mailto:vijayanagara-blr@redhat.com ORGANIZER;CN=Shubhendu Tripathi:mailto:shtripat@redhat.com DTSTART;TZID="Asia/Kolkata":20140127T183000 DTEND;TZID="Asia/Kolkata":20140127T193000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20140121T114004Z DTSTAMP:20140121T114004Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: Feature Revi ew: Gluster Volume Snapshot \nOrganizer: "Shubhendu Tripathi" <shtripat@redh at.com> \n\nLocation: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> \nR esources: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> \nTime: Monday\ , January 27\, 2014\, 6:30:00 PM - 7:30:00 PM GMT +05:30 Chennai\, Kolkata\, Mumbai\, New Delhi\n \nInvitees: arch(a)ovirt.org\; users(a)ovirt.org \n\n\n*~* ~*~*~*~*~*~*~*~*\n\nHi\,\n\nIn this talk I intend to present a short overvie w of the feature Gluster Volume Snapshots in oVirt.\n\nBlueJeans session det ails:\nhttps://bluejeans.com/298626980/6439/browser\n\nWIKI Page:\nhttp://ww w.ovirt.org/Features/GlusterVolumeSnapshots\n\nCall bridge details:\nWould b e shared separately.\n\nThanks and Regards\,\nShubhendu Tripathi BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR ------=_Part_4459753_822472212.1390304404609--

1 0

[Users] Feature Review: Gluster Volume Snapshots
by Shubhendu Tripathi via Blue Jeans Network 21 Jan '14

21 Jan '14

------=_Part_219_383193853.1390304209777 Content-Type: multipart/related; boundary="----=_Part_220_35630018.1390304209777" ------=_Part_220_35630018.1390304209777 Content-Type: multipart/alternative; boundary="----=_Part_221_1833258660.1390304209778" ------=_Part_221_1833258660.1390304209778 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Shubhendu Ram Tripathi (shtripat(a)redhat.com) has invited you to a video meeting. Meeting Title: Feature Review: Gluster Volume Snapshots Meeting Time: Monday January 27, 2014 6:30 p.m. IST / 1 hr ************************************************ To join or start the meeting, go to: https://bluejeans.com/298626980/6439?g=ovzwk4ttibxxm2lsoqxg64th No Computer or Internet Connection? Join via phone: 1) Dial-in phone number: +1 408 740 7256 or +1 888 240 2560 (US or Canada only) (http://bluejeans.com/numbers) 2) Enter Conference ID: 298626980 3) Enter Participant PIN: 6439 Join via room system: 1) Dial-in IP: 199.48.152.152 or bjn.vc 2) Enter Meeting ID: 298626980 3) Enter Participant passcode: 6439 ************************************************ First time joining a Blue Jeans Video Meeting? http://bluejeans.com/faq#connecting ************************************************ Want to test your video connection? http://bluejeans.com/111 ************************************************ Blue Jeans Network 2012 ------=_Part_221_1833258660.1390304209778 Content-Type: text/html;charset="utf-8" Content-Transfer-Encoding: 7bit <table width="100%"> <tr bgcolor="#d8d8d8"> <td align="center"> <table width="600px" bgcolor="#FFFFFF" style="margin-top:20px;padding:0px 50px 10px 50px;margin-bottom:20px;text-align:left;"> <tr> <td style="padding-right:10px;padding-bottom:20px;"> <a href="http://bluejeans.com"> <img src="https://static.bluejeans.com/z1/static/images/bjn/BlueJeans_Logo.png" alt="Blue Jeans" style="border:none;"> </a> </td> </tr> <tr> <td style="font-size: 20px;color: #333333; padding-bottom:30px;"> <a href="mailto:shtripat@redhat.com">Shubhendu Ram Tripathi</a> has invited you to a video meeting. </td> </tr> <tr> <td style="padding-top:10px; font-size: 16px;"> Meeting Title: Feature Review: Gluster Volume Snapshots </td> </tr> <tr> <td style="padding-top:10px; padding-bottom: 10px; font-size: 16px;"> Meeting Time: Monday January 27, 2014 • 6:30 p.m. IST / 1 hr </td> </tr> <tr> <td style="padding-top:40px; padding-bottom: 40px;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody> <tr> <td height="30" bgcolor="#FEFEFE"></td> <td width="200" height="50" bgcolor="#2588AD" align="center" valign="middle"> <a href="https://bluejeans.com/298626980/6439?g=ovzwk4ttibxxm2lsoqxg64th" style="font-family:Helvetica, sans-serif;font-size:17px;color:#FFFFFF;font-weight:bold;text-decoration:none" target="_blank"> Join Meeting </a> </td> <td height="30" bgcolor="#FEFEFE"></td> </tr> </tbody> </table> </td> </tr> <tr> <td> <hr size="1" noshade="noshade" style="line-height:1px;border-color:#cccccc;"> </td> </tr> <tr> <td style="padding-top:10px; padding-bottom:10px;"> No Computer or Internet Connection? Join via phone: 1) <a href="tel:+1 408 740 7256,#298626980#,6439#">Direct-dial with my iPhone</a> or     Dial-in phone number: +1 408 740 7256 or +1 888 240 2560 (US or Canada only) (<a href="http://bluejeans.com/numbers">all</a>) 2) Enter Conference ID: 298626980 3) Enter Participant PIN: 6439 Join via room system: 1) Dial-in IP: 199.48.152.152 or bjn.vc 2) Enter Meeting ID: 298626980 3) Enter Participant passcode: 6439 </td> </tr> <tr> <td> <hr size="1" noshade="noshade" style="line-height:1px;border-color:#cccccc;"> </td> </tr> <tr> <td style="padding-top:10px;padding-bottom: 10px;"> First time joining a Blue Jeans Video Meeting? <a href="http://bluejeans.com/faq#connecting">http://bluejeans.com/faq#connecting</a> </td> </tr> <tr> <td> <hr size="1" noshade="noshade" style="line-height:1px;border-color:#cccccc;"> </td> </tr> <tr> <td style="padding-top:10px;padding-bottom: 10px;"> Want to test your video connection? <a href="http://bluejeans.com/111">http://bluejeans.com/111</a> </td> </tr> <tr> <td style="line-height:1px;color:#CCCCCC;"> <hr size="1" noshade="noshade" style="line-height:1px;color:#CCCCCC;border-color:#CCCCCC;"> </td> </tr> <tr> <td style="font-size:11px;text-align:left"> ©Blue Jeans Network 2013 </td> </tr> </table> </td> </tr> </table> ------=_Part_221_1833258660.1390304209778 Content-Type: text/calendar; method=REQUEST; charset="utf-8" Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR VERSION:2.0 METHOD:REQUEST PRODID:-//PYVOBJECT//NONSGML Version 1//EN BEGIN:VTIMEZONE TZID:Asia/Kolkata TZURL:http://tzurl.org/zoneinfo-outlook/Asia/Kolkata X-LIC-LOCATION:Asia/Kolkata BEGIN:STANDARD TZOFFSETFROM:+0530 TZOFFSETTO:+0530 TZNAME:IST DTSTART:19700101T000000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT UID:0H44B_sN0PzTAnM2@H6D3JmW4G7v71tX DTSTART;TZID=Asia/Kolkata:20140127T183000 DTEND;TZID=Asia/Kolkata:20140127T193000 ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP =TRUE:mailto:users@ovirt.org CREATED:20140121T113648Z DESCRIPTION:\nShubhendu Ram Tripathi (shtripat(a)redhat.com) has invited you to a video meeting.\n\n\n\n********************************************** **\n\nTo join or start the meeting\, go to:\nhttps://bluejeans.com/2986269 80/6439?g=ovzwk4ttibxxm2lsoqxg64th\n\n\nNo Computer or Internet Connection ?\n\nJoin via phone:\n1) Dial-in phone number: +1 408 740 7256 or +1 888 2 40 2560 (US or Canada only) (http://bluejeans.com/numbers)\n2) Enter Conf erence ID: 298626980\n3) Enter Participant PIN: 6439\n\nJoin via room syst em:\n1) Dial-in IP: 199.48.152.152 or bjn.vc\n2) Enter Meeting ID: 2986269 80\n3) Enter Participant passcode: 6439\n\n******************************* *****************\n\nFirst time joining a Blue Jeans Video Meeting?\nhttp: //bluejeans.com/faq#connecting\n\n**************************************** ********\n\nWant to test your video connection?\nhttp://bluejeans.com/111\ n\n************************************************\n\nBlue Jeans Network 2012\n DTSTAMP:20140121T113649Z LAST-MODIFIED:20140121T113648Z LOCATION: ORGANIZER:mailto:shtripat@redhat.com SEQUENCE:0 STATUS:CONFIRMED SUMMARY:Feature Review: Gluster Volume Snapshots TRANSP:OPAQUE END:VEVENT END:VCALENDAR ------=_Part_221_1833258660.1390304209778-- ------=_Part_220_35630018.1390304209777-- ------=_Part_219_383193853.1390304209777 Content-Type: application/ics; name=invite.ics Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=invite.ics BEGIN:VCALENDAR VERSION:2.0 METHOD:REQUEST PRODID:-//PYVOBJECT//NONSGML Version 1//EN BEGIN:VTIMEZONE TZID:Asia/Kolkata TZURL:http://tzurl.org/zoneinfo-outlook/Asia/Kolkata X-LIC-LOCATION:Asia/Kolkata BEGIN:STANDARD TZOFFSETFROM:+0530 TZOFFSETTO:+0530 TZNAME:IST DTSTART:19700101T000000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT UID:0H44B_sN0PzTAnM2@H6D3JmW4G7v71tX DTSTART;TZID=Asia/Kolkata:20140127T183000 DTEND;TZID=Asia/Kolkata:20140127T193000 ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP =TRUE:mailto:users@ovirt.org CREATED:20140121T113648Z DESCRIPTION:\nShubhendu Ram Tripathi (shtripat(a)redhat.com) has invited you to a video meeting.\n\n\n\n********************************************** **\n\nTo join or start the meeting\, go to:\nhttps://bluejeans.com/2986269 80/6439?g=ovzwk4ttibxxm2lsoqxg64th\n\n\nNo Computer or Internet Connection ?\n\nJoin via phone:\n1) Dial-in phone number: +1 408 740 7256 or +1 888 2 40 2560 (US or Canada only) (http://bluejeans.com/numbers)\n2) Enter Conf erence ID: 298626980\n3) Enter Participant PIN: 6439\n\nJoin via room syst em:\n1) Dial-in IP: 199.48.152.152 or bjn.vc\n2) Enter Meeting ID: 2986269 80\n3) Enter Participant passcode: 6439\n\n******************************* *****************\n\nFirst time joining a Blue Jeans Video Meeting?\nhttp: //bluejeans.com/faq#connecting\n\n**************************************** ********\n\nWant to test your video connection?\nhttp://bluejeans.com/111\ n\n************************************************\n\nBlue Jeans Network 2012\n DTSTAMP:20140121T113649Z LAST-MODIFIED:20140121T113648Z LOCATION: ORGANIZER:mailto:shtripat@redhat.com SEQUENCE:0 STATUS:CONFIRMED SUMMARY:Feature Review: Gluster Volume Snapshots TRANSP:OPAQUE END:VEVENT END:VCALENDAR ------=_Part_219_383193853.1390304209777--

1 0

[Users] online storage domain resize
by Jiří Sléžka 21 Jan '14

21 Jan '14

This is a cryptographically signed message in MIME format. --------------ms040006030805040301050402 Content-Type: multipart/mixed; boundary="------------020709050106010805030505" This is a multi-part message in MIME format. --------------020709050106010805030505 Content-Type: text/plain; charset=ISO-8859-2; format=flowed Content-Transfer-Encoding: quoted-printable Hello, I'm just curious and I didn't try it already. I'm using FC storage (Dell = MD3620f) with some logical disks on it. I should be able online increase = virtual disk capacity using storage management (I have some free=20 capacity on disk group). Is there any way to on-line extend volume group used for vm's images=20 storage and don't break anything? I just found this hint by Eduardo from list 1. Shutdown all VMs 2. Manually connect iscsi on the SPM host 3. Run pvresize on the LUN 4. Put the domain in maintenance 5. Activate the domains Is it possible to do this on-line without shutting down all vms? If not, = it could be really nice feature for oncoming releases. Thanks in advance Jiri --------------020709050106010805030505 Content-Type: text/x-vcard; charset=utf-8; name="jiri_slezka.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="jiri_slezka.vcf" begin:vcard fn;quoted-printable:Ing. Ji=3DC5=3D99=3DC3=3DAD Sl=3DC3=3DA9=3DC5=3DBEka n;quoted-printable;quoted-printable:Sl=3DC3=3DA9=3DC5=3DBEka;Ji=3DC5=3D99= =3DC3=3DAD org;quoted-printable;quoted-printable:Slezsk=3DC3=3DA1 univerzita v Opav=3D= C4=3D9B;Centrum informa=3DC4=3D8Dn=3DC3=3DADch technologi=3DC3=3DAD adr;quoted-printable;quoted-printable:Na Rybn=3DC3=3DAD=3DC4=3D8Dku 1;;CI= T, Slezsk=3DC3=3DA1 univerzita v Opav=3DC4=3D9B;Opava;;74601;Czech Republ= ic email;internet:jiri.slezka@slu.cz title;quoted-printable:Spr=3DC3=3DA1vce s=3DC3=3DADt=3DC4=3D9B a aplikac=3D= C3=3DAD tel;work:+420 553 684 696 x-mozilla-html:FALSE url:http://www.slu.cz version:2.1 end:vcard --------------020709050106010805030505-- --------------ms040006030805040301050402 Content-Type: application/pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: Elektronicky podpis S/MIME MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIJZjCC BJswggODoAMCAQICEFVyFjoambpWOjuqgDsl/VswDQYJKoZIhvcNAQEFBQAwOzELMAkGA1UE BhMCTkwxDzANBgNVBAoTBlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBMB4X DTEyMTEyNzAwMDAwMFoXDTE0MTEyNzIzNTk1OVowZTELMAkGA1UEBhMCQ1oxJTAjBgNVBAoM HFNsZXpza8OhIHVuaXZlcnppdGEgdiBPcGF2xJsxGDAWBgNVBAMMD0ppxZnDrSBTbMOpxb5r YTEVMBMGCSqGSIb3DQEJAhYGc2xlemthMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKC AQEAtbqepY7nJ2kyAZxv/HS4tUEyXDh2ovWpQEI3triEqomfGE0aOqkHB0j/z2Oq0IeC+U91 TIpAoTPP+7fYR5rpcTfWPOW745RW4rJ6lj57Y+ZSqY0ID9vHe2nBxSnY2mWGIg///MWSbWrX Pbsxoemn6rb5ZP/1W9oPbkdTI3omEsdX2JlLbjYG3tcwxMvvQUMz3XEXMPz/Vi4SsG+1N49X C+Qw/KI9tYoUqVDZPTQhS4S/zu/ediv2ZH7MwIWo23lhkFU83fDtrpgwsrjIgfHNqIhak0Ly EuiQlxQGrvBplO29S1odQlJBIOpNQU99DElbtNRb1O3LFAUw4dTjMe7ObwIDAQABo4IBbzCC AWswHwYDVR0jBBgwFoAUY01DWhlIP8RGwQK6v+4O5YK3ZqYwHQYDVR0OBBYEFGLVBIcIvL2c hB6HdEbdqflwgrTTMA4GA1UdDwEB/wQEAwIFoDAMBgNVHRMBAf8EAjAAMB0GA1UdJQQWMBQG CCsGAQUFBwMEBggrBgEFBQcDAjAYBgNVHSAEETAPMA0GCysGAQQBsjEBAgIdMD8GA1UdHwQ4 MDYwNKAyoDCGLmh0dHA6Ly9jcmwudGNzLnRlcmVuYS5vcmcvVEVSRU5BUGVyc29uYWxDQS5j cmwwcgYIKwYBBQUHAQEEZjBkMDoGCCsGAQUFBzAChi5odHRwOi8vY3J0LnRjcy50ZXJlbmEu b3JnL1RFUkVOQVBlcnNvbmFsQ0EuY3J0MCYGCCsGAQUFBzABhhpodHRwOi8vb2NzcC50Y3Mu dGVyZW5hLm9yZzAdBgNVHREEFjAUgRJqaXJpLnNsZXprYUBzbHUuY3owDQYJKoZIhvcNAQEF BQADggEBAAXIoOnvYifhjAyW1oALfQSl8UemLGYSXiOsoosWx/2yG2/WlULU1lyqOkqztden dQdt5JZ1Y91HFWRmGGyq+a5kZseYRcpRxEKhJtLngrA24arcvouC/1Wev0RO4d0CKQa/wuC5 yfXIqhn60XJh51mHtbZ4k0jY+U/eNhTWns2Q0NZbR+u3SMrQRa31Df0wmMJvnZkd7cqKF3ur 543ojxAlIVDEUanWPndyljm4ZlAUxmwfmYTd0fRbCl+pDNG+gJnXQO6uvt/yoKNxAaBBFwh0 zmj8k6dCrcpeOKXw+T2mqjSO+6SQBQugGeOSxZA8gZ7rUtf6oNnIZwfxyqoHTVQwggTDMIID q6ADAgECAhBz/lf637jFCIF7Zrlr8C3vMA0GCSqGSIb3DQEBBQUAMIGuMQswCQYDVQQGEwJV UzELMAkGA1UECBMCVVQxFzAVBgNVBAcTDlNhbHQgTGFrZSBDaXR5MR4wHAYDVQQKExVUaGUg VVNFUlRSVVNUIE5ldHdvcmsxITAfBgNVBAsTGGh0dHA6Ly93d3cudXNlcnRydXN0LmNvbTE2 MDQGA1UEAxMtVVROLVVTRVJGaXJzdC1DbGllbnQgQXV0aGVudGljYXRpb24gYW5kIEVtYWls MB4XDTA5MDUxODAwMDAwMFoXDTI4MTIzMTIzNTk1OVowOzELMAkGA1UEBhMCTkwxDzANBgNV BAoTBlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBMIIBIjANBgkqhkiG9w0B AQEFAAOCAQ8AMIIBCgKCAQEAyBXZ9TNqI6GQDc+7BUTDqx9KNYUaIYWgT/jwQOJKQ5v+W7Gw v7RX3HWAQUtkGvbbT2+P0CVFNfnqy0r6+9rT7UWIEZQ25MyoDe/FPTftFnvjwpWeWDN/Ivv4 /+zmvtuuCmUlIofab4SLRuhAhig/v1YI4krpg6LpIvst+rYoH5HBw3H7U8ArTqQMoW6dVe3s 4SSHOgjiDRzkxE3Qyyf6hGTm0ZedViRbk7spLkPiQWo94kpl/JpfWoaHvIfHeYCWmVHGkA9k kZl9EN2sLAMq4Xhk/s49TvQrUBFL0VjUmwPwf/U7U7BTQ/vFL8QEKRo6rNdV6dEOldE7MX94 T64pLQIDAQABo4IBTTCCAUkwHwYDVR0jBBgwFoAUiYJnfcSdJnAAS7RQSHzePa4Ebn0wHQYD VR0OBBYEFGNNQ1oZSD/ERsECur/uDuWCt2amMA4GA1UdDwEB/wQEAwIBBjASBgNVHRMBAf8E CDAGAQH/AgEAMBgGA1UdIAQRMA8wDQYLKwYBBAGyMQECAh0wWAYDVR0fBFEwTzBNoEugSYZH aHR0cDovL2NybC51c2VydHJ1c3QuY29tL1VUTi1VU0VSRmlyc3QtQ2xpZW50QXV0aGVudGlj YXRpb25hbmRFbWFpbC5jcmwwbwYIKwYBBQUHAQEEYzBhMDgGCCsGAQUFBzAChixodHRwOi8v Y3J0LnVzZXJ0cnVzdC5jb20vVVROQUFBQ2xpZW50X0NBLmNydDAlBggrBgEFBQcwAYYZaHR0 cDovL29jc3AudXNlcnRydXN0LmNvbTANBgkqhkiG9w0BAQUFAAOCAQEABiupUy8T3Fw5FsyG n15Me3L77I1Vil6aCv9TTHb0Bj1Qz1fwos+vmYyq/qAZdj6ZAzL6dYM4irtrmqUME7LUG3bm lC5nmFnjkWwCkJqcyGBLVavKiFqNK+VplQMH0dQO/CQiLlmxY6Rf7dkjcuSczjpcbB9PqQDJ Hf76f0Utti6E3Q8noFkYTtV2JUX0mSZ522+fI/dDuysPBKOBJiy3ezX5PXdfQCHmfx2lllq9 0MsWOmy7YYuK/QQ5RArLLOHLzi4QmBrb4JPtSWRkCCCft6NQ8KLdyrTGfAw9514V3CeG5Do7 UloXq6kGUyudCXNkHAHD/TDShwNv5BUDejlfaDGCAwcwggMDAgEBME8wOzELMAkGA1UEBhMC TkwxDzANBgNVBAoTBlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBAhBVchY6 Gpm6Vjo7qoA7Jf1bMAkGBSsOAwIaBQCgggGNMBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEw HAYJKoZIhvcNAQkFMQ8XDTE0MDEyMDE0NTczNFowIwYJKoZIhvcNAQkEMRYEFIoX/VPcdTJX x6m4sGEQH5qjDOoTMF4GCSsGAQQBgjcQBDFRME8wOzELMAkGA1UEBhMCTkwxDzANBgNVBAoT BlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBAhBVchY6Gpm6Vjo7qoA7Jf1b MGAGCyqGSIb3DQEJEAILMVGgTzA7MQswCQYDVQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRsw GQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0ECEFVyFjoambpWOjuqgDsl/VswbAYJKoZIhvcN AQkPMV8wXTALBglghkgBZQMEASowCwYJYIZIAWUDBAECMAoGCCqGSIb3DQMHMA4GCCqGSIb3 DQMCAgIAgDANBggqhkiG9w0DAgIBQDAHBgUrDgMCBzANBggqhkiG9w0DAgIBKDANBgkqhkiG 9w0BAQEFAASCAQARkLOM+mziP6jxoSER0vGkhRFTJ+UJuIDelhhfv908fbf7Qz0m2iNltpBU EfkTYKtIUOo1ZZdUTioGNTHriIcAE9+cqxIEsPwg4QpcImrJUTJPOQ6yhx+4BZ+bAopGaRJy qEN5/xGflbjpk83BragPNE3Cq+0H/msq2RUbfWK+7kEyQGVYigaXzUrxn3VJ4/BaIQTNOg13 esW/R+sJcvh6oIil5/TN7pxuSKj/NkwfpuYzPlr35Izzdjo88GFrwIF0NwkjXGqWD2ZwLmKh 29t0+G7P1MLazz4+yPY+q19bXv60lg9+rv7jq5xM1640CtRMpllbYWzEN6h2B5HfclbAAAAA AAAA --------------ms040006030805040301050402--

3 3

[Users] Node not connecting
by Nauman Abbas 21 Jan '14

21 Jan '14

Hello there Seem to be going in a problem again. I had installed oVirt node on my server and was running the engine on another machine. Now I had to change the engine machine since that was just a test PC so I got rid of the engine machine. Installed the engine on another machine and now i'm trying to add the node to it. It goes on all well until it reaches the 'termination' stage and then it gives an error "Installation failed. Network error during communication with the host." PS SELinux/ebtables is off on both machines. A little help would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

4 5

[Users] VoIP on virtual infrastructure and oVirt in particular
by Gianluca Cecchi 21 Jan '14

21 Jan '14

Hello, any feedback about VoIP softswitches on virtual servers? I found this positive whitepaper on VMware web site but it seems mostly related to Class5 softswitches (intended for work with end-users): http://www.vmware.com/files/pdf/techpaper/voip-perf-vsphere5.pdf I would like to know about real experiences and Class4 softswitches too (used for transit VoIP traffic between carriers). Thanks in advance, Gianluca

3 2

[Users] Register a disk image via oVirt REST api
by Satya Vempati 20 Jan '14

20 Jan '14

--_000_16669B246DBC4D4EB043E6B646D51CEA2231D8mbx025w1ca8exch02_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I have a disk image (i.e. a file) that I want to register as a disk using t= he REST API. The REST API works with existing disks, but does the API work with disk ima= ges? --_000_16669B246DBC4D4EB043E6B646D51CEA2231D8mbx025w1ca8exch02_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> I have a disk image (i.e. a file) that I want to reg= ister as a disk using the REST API. <o:p></o:p> <o:p> </o:p> The REST API works with existing disks, but does the= API work with disk images?<o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_16669B246DBC4D4EB043E6B646D51CEA2231D8mbx025w1ca8exch02_--

3 11

[Users] oVirt Node ISO for oVirt 3.3 - Draft image for testing
by Fabian Deutsch 20 Jan '14

20 Jan '14

--=-0VuymFCw5CMiaFLyxpM6 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Hey, as many of you have noticed there wasn't any well working oVirt Node ISO around for oVirt 3.3. To get this ball rolling again I've put together a draft image of ALPHA quality. It contains many fixes some of us have been working on over the last weeks. - Source & ISO - To not drown Jenkins in a hell-of-a-patch-queue I've pushed the patches to https://github.com/fabiand/ovirt-node/tree/teamsync The ISO built from that patchset can be found here: http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.2014= 01170926draft.vdsm.el6.iso Please test this draft image and provide feedback on how it works for you. If you encounter problems - and you probably will - please take a look here on how to debug them: http://www.ovirt.org/Node_Troubleshooting - Important Notes - SELinux: Boot this alpha image with enforcing=3D0 to log potential denials, but not block the calls. To fix those denials permanently please attach your /var/log/audit/audit.log to a bug in bugzilla. Known problems: - Exception is raised after registration to Engine - Many bond devices are show on network page - Denials appear in /var/log/audit/audit.log And don't hesitate to reach out to us if you want to get more involved with Node. - fabian --=-0VuymFCw5CMiaFLyxpM6 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part Content-Transfer-Encoding: 7bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQIcBAABAgAGBQJS2Q8IAAoJEC9+uOgSHVGUE4cP/05i7nAgZVXJGhErZeZQlpkn eP6ot4cCRS4MDDOjfkrK54TNvs+CrKMefsvDv4B8NzfnaDHrVjyCFI2+8Yfhj/0/ so/csLBWy1A0LR5tHv4RQBov8Dz74zgMjZxMeGIMuQcQekSmghONK8vQsfpGOtys xytG84MXRTQjrkJt5Wc7V1AKxkH7lHGH21g+IDesnSVUQouA/Zu/x/4A0o/mx/R+ VJow7lNR/PMlMe8fzjFNUrlFYjA0olFGFaeVXfphVjhnIIN2dJABVpb6hXfU25Uy 6rwjr45eS8gL81JjMEm3XwD215WxdlmzVawcVmqcKcrBu7U+eKxFZFYSe4HD7Nnf E4Aw3A5mSK76WFjLyaKwczXl1DyWNdTp1yIPDtX8H5lG2rJpUe23o2yMlqn3IZ5u JjBRjg5EwgHfucxpRRUwdh8tnYIzgp6ejhvgwbY8X8kYwXqSd8Td5mZvM8GBEdif noXrJImIYoU08Q/0acjiOpZ710wqEvPhmL15okXj+3+WFp53aMUdUY8F2amSBj+a ik+Zzpiq0SXTthuAatOUxdTX+Sp0kraV5moV6qBYxXX80wGLg2qzhNA4xZ0vqkc2 ipQOuyceGWCaSziklngY86DNNWzhkaOAyCyTmXDMokSthAITI4LVgsuWIvy2A8Z1 JSMjEl7msdgH/t3OFrjO =oLBg -----END PGP SIGNATURE----- --=-0VuymFCw5CMiaFLyxpM6--

2 6

[Users] virt-v2v: too many IDE bus:
by Markus Stockhausen 20 Jan '14

20 Jan '14

------=_NextPartTM-000-dd723cdf-6ccb-4b19-9baf-8b262252573c Content-Type: multipart/alternative; boundary="_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_" --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, we are currently encountering the above error during virt-v2v migration. There was an older post about it here: http://lists.ovirt.org/pipermail/users/2013-December/018379.html The answers suggest that this is already fixed upstream and that you only need virt-v2v for OS disks. Could someone, explain - how to migrate only the OS disk and to dd the data disks. - if there exist any offical patches to fix the bug. Thanks in advance. Markus --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html dir=3D"ltr"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <style id=3D"owaParaStyle" type=3D"text/css">P {margin-top:0;margin-bottom:= 0;}</style> </head> <body ocsi=3D"0" fpstyle=3D"1"> <div style=3D"direction: ltr;font-family: Tahoma;color: #000000;font-size: = 10pt;">Hello, we are currently encountering the above error during virt-v2v migration. There was an older post about it here: http://lists.ovirt.org/pipermail/users/2013-December/018379.html The answers suggest that this is already fixed upstream and that you only need virt-v2v for OS disks. Could someone, explain - how to migrate only the OS disk and to dd the data disks. - if there exist any offical patches to fix the bug. Thanks in advance. Markus </div> </body> </html> --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_-- ------=_NextPartTM-000-dd723cdf-6ccb-4b19-9baf-8b262252573c Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-dd723cdf-6ccb-4b19-9baf-8b262252573c--

3 3