January 2014 - Users - oVirt List Archives

[Users] Networking questions (LONG)
by Alan Murrell 21 Jan '14

21 Jan '14

------_=_NextPart_001_01CF0D11.E17769E3 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I am evaluating oVirt as a replacement/alternative to VMware deployments = we typically do. I have installed and all-in-one setup on a test box = (which itself used to be an ESXi server), but it only has one NIC. I = trying to duplicate our typical configuration we do in VMware, which is = this: 1.) we create several "port groups" on the vSwitch, each assigned a = VLAN ID, such as: - VLAN001 (VLAN ID: 1) - VLAN002 (VLAN ID: 2) - VLAN009 (VLAN ID: 9) - VLAN010 (VLAN ID: 10) - VLAN200 (VLAN ID: 200) - TRUNK (VLAN ID: 4095 - in VMware-world, VLAN ID "4095" is "all = VLANS" and basically just passes the VLANs through to whatever is = attached to the port group for the VM to handle) 2.) We assign VMs to port groups appropriate for the VLAN they are = part of. 3.) The only VM that has a NIC assigned to the "TRUNK" port group is = the firewall (which is Linux), and we create VLAN interfaces on it = (i.e., "eth1.1", "eth1.2", "eth1.10", "eth1.200"). The firewall VM acts = as the router between the various VLANs. To replicate the above in oVirt, I created logical networks for each = VLAN, and assigned the appropriate VLAN ID. It seems oVirt/KVM does not = have an equivalent for VMware's VLAN ID of "4095", so after some = searching around, so for the "TRUNK" network, I left it with no VLAN = assigned. Because i cannot add VLAN and non-VLAN networks to the same = physical NIC, after some searching around, it looks like I may have to = utilise two NICS: one for the VLAN networks and one for the "TRUNK" = network. Because, at this point, I am not yet concerned with making the test VMs = I will be setting up be accessible from outside the virtual lab = environment (i.e., everything will communicate within my oVirt = server/network for now), I am trying to make use of "dummy" interfaces, = but I am not sure the best way to make use of this. I am able to create = the dummy* interfaces and have them show up in oVirt, but I am not sure = of how they should be setup. Here is what I am *thinking* should be = done, but want to make sure it is correct before getting too deep: - I will use the physical NIC for management, therefore the = "ovirtmgmt" bridge with eth0 assigned to it will remain as-is - Create two dummy interfaces: "dummy0" and "dummy1" - Create a new bridge, "ovirtvm" and assign "dummy0" and "dummy1" to = it - Attach the VLAN-enabled networks to "dummy0" - Attach the "TRUNK" network to "dummy1" Would the above be the way to go about this? The one thing I am not = sure of is whether or not having no VLAN assigned (on the "TRUNK" = network) accomplishes the same this as the "VLAN ID 4095" in VMware: = will oVirt/KVM just pass the traffic through for the VM attached to it = to deal with? Thanks for reading this far, and I appreciate any help you might be able = to lend in the above. -Alan ------_=_NextPart_001_01CF0D11.E17769E3 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version = 6.5.7654.12"> <TITLE>Networking questions (LONG)</TITLE> </HEAD> <BODY>  Hello, I am evaluating oVirt as a replacement/alternative to VMware deployments = we typically do.  I have installed and all-in-one setup on a test = box (which itself used to be an ESXi server), but it only has one = NIC.  I trying to duplicate our typical configuration we do in = VMware, which is this:   1.) we create several "port groups" on the vSwitch, = each assigned a VLAN ID, such as:       - VLAN001 (VLAN ID: 1)       - VLAN002 (VLAN ID: 2)       - VLAN009 (VLAN ID: 9)       - VLAN010 (VLAN ID: 10)       - VLAN200 (VLAN ID: 200)       - TRUNK (VLAN ID: 4095 - in VMware-world, = VLAN ID "4095" is "all VLANS" and basically just = passes the VLANs through to whatever is attached to the port group for = the VM to handle)   2.) We assign VMs to port groups appropriate for the VLAN they = are part of.   3.) The only VM that has a NIC assigned to the "TRUNK" = port group is the firewall (which is Linux), and we create VLAN = interfaces on it (i.e., "eth1.1", "eth1.2", = "eth1.10", "eth1.200").  The firewall VM acts = as the router between the various VLANs. To replicate the above in oVirt, I created logical networks for each = VLAN, and assigned the appropriate VLAN ID.  It seems oVirt/KVM = does not have an equivalent for VMware's VLAN ID of "4095", so = after some searching around, so for the "TRUNK" network, I = left it with no VLAN assigned.  Because i cannot add VLAN and = non-VLAN networks to the same physical NIC, after some searching around, = it looks like I may have to utilise two NICS: one for the VLAN networks = and one for the "TRUNK" network. Because, at this point, I am not yet concerned with making the test VMs = I will be setting up be accessible from outside the virtual lab = environment (i.e., everything will communicate within my oVirt = server/network for now), I am trying to make use of "dummy" = interfaces, but I am not sure the best way to make use of this.  I = am able to create the dummy* interfaces and have them show up in oVirt, = but I am not sure of how they should be setup.  Here is what I am = *thinking* should be done, but want to make sure it is correct before = getting too deep:   - I will use the physical NIC for management, therefore the = "ovirtmgmt" bridge with eth0 assigned to it will remain = as-is   - Create two dummy interfaces: "dummy0" and = "dummy1"   - Create a new bridge, "ovirtvm" and assign = "dummy0" and "dummy1" to it   - Attach the VLAN-enabled networks to "dummy0"   - Attach the "TRUNK" network to "dummy1" Would the above be the way to go about this?  The one thing I am = not sure of is whether or not having no VLAN assigned (on the = "TRUNK" network) accomplishes the same this as the "VLAN = ID 4095" in VMware: will oVirt/KVM just pass the traffic through = for the VM attached to it to deal with? Thanks for reading this far, and I appreciate any help you might be able = to lend in the above. -Alan </BODY> </HTML> ------_=_NextPart_001_01CF0D11.E17769E3--

7 14

[Users] Script to auto backup VMs
by Jairo Rizzo 21 Jan '14

21 Jan '14

Hello, Do you guys know of a script that I could use to backup VMs automatically but creating the lower downtime? I modified a bit the 'virt-backup.pl' script by Daniel Berteaud <daniel(a)firewall-services.com> so it authenticates against Ovirt as shown below: Sys::Virt::CRED_AUTHNAME, Sys::Virt::CRED_PASSPHRASE, However, wondering if I could get advice from you as to which tool or script will do this job better. Thanks --Rizzo

1 0

[Users] Feature Review: Gluster Volume Snapshot
by Shubhendu Tripathi 21 Jan '14

21 Jan '14

------=_Part_4459753_822472212.1390304404609 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit The following is a new meeting request: Subject: Feature Review: Gluster Volume Snapshot Organizer: "Shubhendu Tripathi" <shtripat(a)redhat.com> Location: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> Resources: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> Time: Monday, January 27, 2014, 6:30:00 PM - 7:30:00 PM GMT +05:30 Chennai, Kolkata, Mumbai, New Delhi Invitees: arch(a)ovirt.org; users(a)ovirt.org *~*~*~*~*~*~*~*~*~* Hi, In this talk I intend to present a short overview of the feature Gluster Volume Snapshots in oVirt. BlueJeans session details: https://bluejeans.com/298626980/6439/browser WIKI Page: http://www.ovirt.org/Features/GlusterVolumeSnapshots Call bridge details: Would be shared separately. Thanks and Regards, Shubhendu Tripathi ------=_Part_4459753_822472212.1390304404609 Content-Type: text/calendar; charset=utf-8; method=REQUEST; name=meeting.ics Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Kolkata BEGIN:STANDARD DTSTART:16010101T000000 TZOFFSETTO:+0530 TZOFFSETFROM:+0530 TZNAME:IST END:STANDARD END:VTIMEZONE BEGIN:VEVENT UID:3440764a-ef38-4491-a023-f369dcfe9a18 SUMMARY:Feature Review: Gluster Volume Snapshot LOCATION:"Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:arch@ov irt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:users@o virt.org ATTENDEE;CN=Vijayanagara - BLR;CUTYPE=RESOURCE;ROLE=NON-PARTICIPANT;PARTSTAT =NEEDS-ACTION;RSVP=TRUE:mailto:vijayanagara-blr@redhat.com ORGANIZER;CN=Shubhendu Tripathi:mailto:shtripat@redhat.com DTSTART;TZID="Asia/Kolkata":20140127T183000 DTEND;TZID="Asia/Kolkata":20140127T193000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20140121T114004Z DTSTAMP:20140121T114004Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: Feature Revi ew: Gluster Volume Snapshot \nOrganizer: "Shubhendu Tripathi" <shtripat@redh at.com> \n\nLocation: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> \nR esources: "Vijayanagara - BLR" <vijayanagara-blr(a)redhat.com> \nTime: Monday\ , January 27\, 2014\, 6:30:00 PM - 7:30:00 PM GMT +05:30 Chennai\, Kolkata\, Mumbai\, New Delhi\n \nInvitees: arch(a)ovirt.org\; users(a)ovirt.org \n\n\n*~* ~*~*~*~*~*~*~*~*\n\nHi\,\n\nIn this talk I intend to present a short overvie w of the feature Gluster Volume Snapshots in oVirt.\n\nBlueJeans session det ails:\nhttps://bluejeans.com/298626980/6439/browser\n\nWIKI Page:\nhttp://ww w.ovirt.org/Features/GlusterVolumeSnapshots\n\nCall bridge details:\nWould b e shared separately.\n\nThanks and Regards\,\nShubhendu Tripathi BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR ------=_Part_4459753_822472212.1390304404609--

1 0

[Users] Feature Review: Gluster Volume Snapshots
by Shubhendu Tripathi via Blue Jeans Network 21 Jan '14

21 Jan '14

------=_Part_219_383193853.1390304209777 Content-Type: multipart/related; boundary="----=_Part_220_35630018.1390304209777" ------=_Part_220_35630018.1390304209777 Content-Type: multipart/alternative; boundary="----=_Part_221_1833258660.1390304209778" ------=_Part_221_1833258660.1390304209778 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Shubhendu Ram Tripathi (shtripat(a)redhat.com) has invited you to a video meeting. Meeting Title: Feature Review: Gluster Volume Snapshots Meeting Time: Monday January 27, 2014 6:30 p.m. IST / 1 hr ************************************************ To join or start the meeting, go to: https://bluejeans.com/298626980/6439?g=ovzwk4ttibxxm2lsoqxg64th No Computer or Internet Connection? Join via phone: 1) Dial-in phone number: +1 408 740 7256 or +1 888 240 2560 (US or Canada only) (http://bluejeans.com/numbers) 2) Enter Conference ID: 298626980 3) Enter Participant PIN: 6439 Join via room system: 1) Dial-in IP: 199.48.152.152 or bjn.vc 2) Enter Meeting ID: 298626980 3) Enter Participant passcode: 6439 ************************************************ First time joining a Blue Jeans Video Meeting? http://bluejeans.com/faq#connecting ************************************************ Want to test your video connection? http://bluejeans.com/111 ************************************************ Blue Jeans Network 2012 ------=_Part_221_1833258660.1390304209778 Content-Type: text/html;charset="utf-8" Content-Transfer-Encoding: 7bit <table width="100%"> <tr bgcolor="#d8d8d8"> <td align="center"> <table width="600px" bgcolor="#FFFFFF" style="margin-top:20px;padding:0px 50px 10px 50px;margin-bottom:20px;text-align:left;"> <tr> <td style="padding-right:10px;padding-bottom:20px;"> <a href="http://bluejeans.com"> <img src="https://static.bluejeans.com/z1/static/images/bjn/BlueJeans_Logo.png" alt="Blue Jeans" style="border:none;"> </a> </td> </tr> <tr> <td style="font-size: 20px;color: #333333; padding-bottom:30px;"> <a href="mailto:shtripat@redhat.com">Shubhendu Ram Tripathi</a> has invited you to a video meeting. </td> </tr> <tr> <td style="padding-top:10px; font-size: 16px;"> Meeting Title: Feature Review: Gluster Volume Snapshots </td> </tr> <tr> <td style="padding-top:10px; padding-bottom: 10px; font-size: 16px;"> Meeting Time: Monday January 27, 2014 • 6:30 p.m. IST / 1 hr </td> </tr> <tr> <td style="padding-top:40px; padding-bottom: 40px;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody> <tr> <td height="30" bgcolor="#FEFEFE"></td> <td width="200" height="50" bgcolor="#2588AD" align="center" valign="middle"> <a href="https://bluejeans.com/298626980/6439?g=ovzwk4ttibxxm2lsoqxg64th" style="font-family:Helvetica, sans-serif;font-size:17px;color:#FFFFFF;font-weight:bold;text-decoration:none" target="_blank"> Join Meeting </a> </td> <td height="30" bgcolor="#FEFEFE"></td> </tr> </tbody> </table> </td> </tr> <tr> <td> <hr size="1" noshade="noshade" style="line-height:1px;border-color:#cccccc;"> </td> </tr> <tr> <td style="padding-top:10px; padding-bottom:10px;"> No Computer or Internet Connection? Join via phone: 1) <a href="tel:+1 408 740 7256,#298626980#,6439#">Direct-dial with my iPhone</a> or     Dial-in phone number: +1 408 740 7256 or +1 888 240 2560 (US or Canada only) (<a href="http://bluejeans.com/numbers">all</a>) 2) Enter Conference ID: 298626980 3) Enter Participant PIN: 6439 Join via room system: 1) Dial-in IP: 199.48.152.152 or bjn.vc 2) Enter Meeting ID: 298626980 3) Enter Participant passcode: 6439 </td> </tr> <tr> <td> <hr size="1" noshade="noshade" style="line-height:1px;border-color:#cccccc;"> </td> </tr> <tr> <td style="padding-top:10px;padding-bottom: 10px;"> First time joining a Blue Jeans Video Meeting? <a href="http://bluejeans.com/faq#connecting">http://bluejeans.com/faq#connecting</a> </td> </tr> <tr> <td> <hr size="1" noshade="noshade" style="line-height:1px;border-color:#cccccc;"> </td> </tr> <tr> <td style="padding-top:10px;padding-bottom: 10px;"> Want to test your video connection? <a href="http://bluejeans.com/111">http://bluejeans.com/111</a> </td> </tr> <tr> <td style="line-height:1px;color:#CCCCCC;"> <hr size="1" noshade="noshade" style="line-height:1px;color:#CCCCCC;border-color:#CCCCCC;"> </td> </tr> <tr> <td style="font-size:11px;text-align:left"> ©Blue Jeans Network 2013 </td> </tr> </table> </td> </tr> </table> ------=_Part_221_1833258660.1390304209778 Content-Type: text/calendar; method=REQUEST; charset="utf-8" Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR VERSION:2.0 METHOD:REQUEST PRODID:-//PYVOBJECT//NONSGML Version 1//EN BEGIN:VTIMEZONE TZID:Asia/Kolkata TZURL:http://tzurl.org/zoneinfo-outlook/Asia/Kolkata X-LIC-LOCATION:Asia/Kolkata BEGIN:STANDARD TZOFFSETFROM:+0530 TZOFFSETTO:+0530 TZNAME:IST DTSTART:19700101T000000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT UID:0H44B_sN0PzTAnM2@H6D3JmW4G7v71tX DTSTART;TZID=Asia/Kolkata:20140127T183000 DTEND;TZID=Asia/Kolkata:20140127T193000 ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP =TRUE:mailto:users@ovirt.org CREATED:20140121T113648Z DESCRIPTION:\nShubhendu Ram Tripathi (shtripat(a)redhat.com) has invited you to a video meeting.\n\n\n\n********************************************** **\n\nTo join or start the meeting\, go to:\nhttps://bluejeans.com/2986269 80/6439?g=ovzwk4ttibxxm2lsoqxg64th\n\n\nNo Computer or Internet Connection ?\n\nJoin via phone:\n1) Dial-in phone number: +1 408 740 7256 or +1 888 2 40 2560 (US or Canada only) (http://bluejeans.com/numbers)\n2) Enter Conf erence ID: 298626980\n3) Enter Participant PIN: 6439\n\nJoin via room syst em:\n1) Dial-in IP: 199.48.152.152 or bjn.vc\n2) Enter Meeting ID: 2986269 80\n3) Enter Participant passcode: 6439\n\n******************************* *****************\n\nFirst time joining a Blue Jeans Video Meeting?\nhttp: //bluejeans.com/faq#connecting\n\n**************************************** ********\n\nWant to test your video connection?\nhttp://bluejeans.com/111\ n\n************************************************\n\nBlue Jeans Network 2012\n DTSTAMP:20140121T113649Z LAST-MODIFIED:20140121T113648Z LOCATION: ORGANIZER:mailto:shtripat@redhat.com SEQUENCE:0 STATUS:CONFIRMED SUMMARY:Feature Review: Gluster Volume Snapshots TRANSP:OPAQUE END:VEVENT END:VCALENDAR ------=_Part_221_1833258660.1390304209778-- ------=_Part_220_35630018.1390304209777-- ------=_Part_219_383193853.1390304209777 Content-Type: application/ics; name=invite.ics Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=invite.ics BEGIN:VCALENDAR VERSION:2.0 METHOD:REQUEST PRODID:-//PYVOBJECT//NONSGML Version 1//EN BEGIN:VTIMEZONE TZID:Asia/Kolkata TZURL:http://tzurl.org/zoneinfo-outlook/Asia/Kolkata X-LIC-LOCATION:Asia/Kolkata BEGIN:STANDARD TZOFFSETFROM:+0530 TZOFFSETTO:+0530 TZNAME:IST DTSTART:19700101T000000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT UID:0H44B_sN0PzTAnM2@H6D3JmW4G7v71tX DTSTART;TZID=Asia/Kolkata:20140127T183000 DTEND;TZID=Asia/Kolkata:20140127T193000 ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP =TRUE:mailto:users@ovirt.org CREATED:20140121T113648Z DESCRIPTION:\nShubhendu Ram Tripathi (shtripat(a)redhat.com) has invited you to a video meeting.\n\n\n\n********************************************** **\n\nTo join or start the meeting\, go to:\nhttps://bluejeans.com/2986269 80/6439?g=ovzwk4ttibxxm2lsoqxg64th\n\n\nNo Computer or Internet Connection ?\n\nJoin via phone:\n1) Dial-in phone number: +1 408 740 7256 or +1 888 2 40 2560 (US or Canada only) (http://bluejeans.com/numbers)\n2) Enter Conf erence ID: 298626980\n3) Enter Participant PIN: 6439\n\nJoin via room syst em:\n1) Dial-in IP: 199.48.152.152 or bjn.vc\n2) Enter Meeting ID: 2986269 80\n3) Enter Participant passcode: 6439\n\n******************************* *****************\n\nFirst time joining a Blue Jeans Video Meeting?\nhttp: //bluejeans.com/faq#connecting\n\n**************************************** ********\n\nWant to test your video connection?\nhttp://bluejeans.com/111\ n\n************************************************\n\nBlue Jeans Network 2012\n DTSTAMP:20140121T113649Z LAST-MODIFIED:20140121T113648Z LOCATION: ORGANIZER:mailto:shtripat@redhat.com SEQUENCE:0 STATUS:CONFIRMED SUMMARY:Feature Review: Gluster Volume Snapshots TRANSP:OPAQUE END:VEVENT END:VCALENDAR ------=_Part_219_383193853.1390304209777--

1 0

[Users] online storage domain resize
by Jiří Sléžka 21 Jan '14

21 Jan '14

This is a cryptographically signed message in MIME format. --------------ms040006030805040301050402 Content-Type: multipart/mixed; boundary="------------020709050106010805030505" This is a multi-part message in MIME format. --------------020709050106010805030505 Content-Type: text/plain; charset=ISO-8859-2; format=flowed Content-Transfer-Encoding: quoted-printable Hello, I'm just curious and I didn't try it already. I'm using FC storage (Dell = MD3620f) with some logical disks on it. I should be able online increase = virtual disk capacity using storage management (I have some free=20 capacity on disk group). Is there any way to on-line extend volume group used for vm's images=20 storage and don't break anything? I just found this hint by Eduardo from list 1. Shutdown all VMs 2. Manually connect iscsi on the SPM host 3. Run pvresize on the LUN 4. Put the domain in maintenance 5. Activate the domains Is it possible to do this on-line without shutting down all vms? If not, = it could be really nice feature for oncoming releases. Thanks in advance Jiri --------------020709050106010805030505 Content-Type: text/x-vcard; charset=utf-8; name="jiri_slezka.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="jiri_slezka.vcf" begin:vcard fn;quoted-printable:Ing. Ji=3DC5=3D99=3DC3=3DAD Sl=3DC3=3DA9=3DC5=3DBEka n;quoted-printable;quoted-printable:Sl=3DC3=3DA9=3DC5=3DBEka;Ji=3DC5=3D99= =3DC3=3DAD org;quoted-printable;quoted-printable:Slezsk=3DC3=3DA1 univerzita v Opav=3D= C4=3D9B;Centrum informa=3DC4=3D8Dn=3DC3=3DADch technologi=3DC3=3DAD adr;quoted-printable;quoted-printable:Na Rybn=3DC3=3DAD=3DC4=3D8Dku 1;;CI= T, Slezsk=3DC3=3DA1 univerzita v Opav=3DC4=3D9B;Opava;;74601;Czech Republ= ic email;internet:jiri.slezka@slu.cz title;quoted-printable:Spr=3DC3=3DA1vce s=3DC3=3DADt=3DC4=3D9B a aplikac=3D= C3=3DAD tel;work:+420 553 684 696 x-mozilla-html:FALSE url:http://www.slu.cz version:2.1 end:vcard --------------020709050106010805030505-- --------------ms040006030805040301050402 Content-Type: application/pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: Elektronicky podpis S/MIME MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIJZjCC BJswggODoAMCAQICEFVyFjoambpWOjuqgDsl/VswDQYJKoZIhvcNAQEFBQAwOzELMAkGA1UE BhMCTkwxDzANBgNVBAoTBlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBMB4X DTEyMTEyNzAwMDAwMFoXDTE0MTEyNzIzNTk1OVowZTELMAkGA1UEBhMCQ1oxJTAjBgNVBAoM HFNsZXpza8OhIHVuaXZlcnppdGEgdiBPcGF2xJsxGDAWBgNVBAMMD0ppxZnDrSBTbMOpxb5r YTEVMBMGCSqGSIb3DQEJAhYGc2xlemthMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKC AQEAtbqepY7nJ2kyAZxv/HS4tUEyXDh2ovWpQEI3triEqomfGE0aOqkHB0j/z2Oq0IeC+U91 TIpAoTPP+7fYR5rpcTfWPOW745RW4rJ6lj57Y+ZSqY0ID9vHe2nBxSnY2mWGIg///MWSbWrX Pbsxoemn6rb5ZP/1W9oPbkdTI3omEsdX2JlLbjYG3tcwxMvvQUMz3XEXMPz/Vi4SsG+1N49X C+Qw/KI9tYoUqVDZPTQhS4S/zu/ediv2ZH7MwIWo23lhkFU83fDtrpgwsrjIgfHNqIhak0Ly EuiQlxQGrvBplO29S1odQlJBIOpNQU99DElbtNRb1O3LFAUw4dTjMe7ObwIDAQABo4IBbzCC AWswHwYDVR0jBBgwFoAUY01DWhlIP8RGwQK6v+4O5YK3ZqYwHQYDVR0OBBYEFGLVBIcIvL2c hB6HdEbdqflwgrTTMA4GA1UdDwEB/wQEAwIFoDAMBgNVHRMBAf8EAjAAMB0GA1UdJQQWMBQG CCsGAQUFBwMEBggrBgEFBQcDAjAYBgNVHSAEETAPMA0GCysGAQQBsjEBAgIdMD8GA1UdHwQ4 MDYwNKAyoDCGLmh0dHA6Ly9jcmwudGNzLnRlcmVuYS5vcmcvVEVSRU5BUGVyc29uYWxDQS5j cmwwcgYIKwYBBQUHAQEEZjBkMDoGCCsGAQUFBzAChi5odHRwOi8vY3J0LnRjcy50ZXJlbmEu b3JnL1RFUkVOQVBlcnNvbmFsQ0EuY3J0MCYGCCsGAQUFBzABhhpodHRwOi8vb2NzcC50Y3Mu dGVyZW5hLm9yZzAdBgNVHREEFjAUgRJqaXJpLnNsZXprYUBzbHUuY3owDQYJKoZIhvcNAQEF BQADggEBAAXIoOnvYifhjAyW1oALfQSl8UemLGYSXiOsoosWx/2yG2/WlULU1lyqOkqztden dQdt5JZ1Y91HFWRmGGyq+a5kZseYRcpRxEKhJtLngrA24arcvouC/1Wev0RO4d0CKQa/wuC5 yfXIqhn60XJh51mHtbZ4k0jY+U/eNhTWns2Q0NZbR+u3SMrQRa31Df0wmMJvnZkd7cqKF3ur 543ojxAlIVDEUanWPndyljm4ZlAUxmwfmYTd0fRbCl+pDNG+gJnXQO6uvt/yoKNxAaBBFwh0 zmj8k6dCrcpeOKXw+T2mqjSO+6SQBQugGeOSxZA8gZ7rUtf6oNnIZwfxyqoHTVQwggTDMIID q6ADAgECAhBz/lf637jFCIF7Zrlr8C3vMA0GCSqGSIb3DQEBBQUAMIGuMQswCQYDVQQGEwJV UzELMAkGA1UECBMCVVQxFzAVBgNVBAcTDlNhbHQgTGFrZSBDaXR5MR4wHAYDVQQKExVUaGUg VVNFUlRSVVNUIE5ldHdvcmsxITAfBgNVBAsTGGh0dHA6Ly93d3cudXNlcnRydXN0LmNvbTE2 MDQGA1UEAxMtVVROLVVTRVJGaXJzdC1DbGllbnQgQXV0aGVudGljYXRpb24gYW5kIEVtYWls MB4XDTA5MDUxODAwMDAwMFoXDTI4MTIzMTIzNTk1OVowOzELMAkGA1UEBhMCTkwxDzANBgNV BAoTBlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBMIIBIjANBgkqhkiG9w0B AQEFAAOCAQ8AMIIBCgKCAQEAyBXZ9TNqI6GQDc+7BUTDqx9KNYUaIYWgT/jwQOJKQ5v+W7Gw v7RX3HWAQUtkGvbbT2+P0CVFNfnqy0r6+9rT7UWIEZQ25MyoDe/FPTftFnvjwpWeWDN/Ivv4 /+zmvtuuCmUlIofab4SLRuhAhig/v1YI4krpg6LpIvst+rYoH5HBw3H7U8ArTqQMoW6dVe3s 4SSHOgjiDRzkxE3Qyyf6hGTm0ZedViRbk7spLkPiQWo94kpl/JpfWoaHvIfHeYCWmVHGkA9k kZl9EN2sLAMq4Xhk/s49TvQrUBFL0VjUmwPwf/U7U7BTQ/vFL8QEKRo6rNdV6dEOldE7MX94 T64pLQIDAQABo4IBTTCCAUkwHwYDVR0jBBgwFoAUiYJnfcSdJnAAS7RQSHzePa4Ebn0wHQYD VR0OBBYEFGNNQ1oZSD/ERsECur/uDuWCt2amMA4GA1UdDwEB/wQEAwIBBjASBgNVHRMBAf8E CDAGAQH/AgEAMBgGA1UdIAQRMA8wDQYLKwYBBAGyMQECAh0wWAYDVR0fBFEwTzBNoEugSYZH aHR0cDovL2NybC51c2VydHJ1c3QuY29tL1VUTi1VU0VSRmlyc3QtQ2xpZW50QXV0aGVudGlj YXRpb25hbmRFbWFpbC5jcmwwbwYIKwYBBQUHAQEEYzBhMDgGCCsGAQUFBzAChixodHRwOi8v Y3J0LnVzZXJ0cnVzdC5jb20vVVROQUFBQ2xpZW50X0NBLmNydDAlBggrBgEFBQcwAYYZaHR0 cDovL29jc3AudXNlcnRydXN0LmNvbTANBgkqhkiG9w0BAQUFAAOCAQEABiupUy8T3Fw5FsyG n15Me3L77I1Vil6aCv9TTHb0Bj1Qz1fwos+vmYyq/qAZdj6ZAzL6dYM4irtrmqUME7LUG3bm lC5nmFnjkWwCkJqcyGBLVavKiFqNK+VplQMH0dQO/CQiLlmxY6Rf7dkjcuSczjpcbB9PqQDJ Hf76f0Utti6E3Q8noFkYTtV2JUX0mSZ522+fI/dDuysPBKOBJiy3ezX5PXdfQCHmfx2lllq9 0MsWOmy7YYuK/QQ5RArLLOHLzi4QmBrb4JPtSWRkCCCft6NQ8KLdyrTGfAw9514V3CeG5Do7 UloXq6kGUyudCXNkHAHD/TDShwNv5BUDejlfaDGCAwcwggMDAgEBME8wOzELMAkGA1UEBhMC TkwxDzANBgNVBAoTBlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBAhBVchY6 Gpm6Vjo7qoA7Jf1bMAkGBSsOAwIaBQCgggGNMBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEw HAYJKoZIhvcNAQkFMQ8XDTE0MDEyMDE0NTczNFowIwYJKoZIhvcNAQkEMRYEFIoX/VPcdTJX x6m4sGEQH5qjDOoTMF4GCSsGAQQBgjcQBDFRME8wOzELMAkGA1UEBhMCTkwxDzANBgNVBAoT BlRFUkVOQTEbMBkGA1UEAxMSVEVSRU5BIFBlcnNvbmFsIENBAhBVchY6Gpm6Vjo7qoA7Jf1b MGAGCyqGSIb3DQEJEAILMVGgTzA7MQswCQYDVQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRsw GQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0ECEFVyFjoambpWOjuqgDsl/VswbAYJKoZIhvcN AQkPMV8wXTALBglghkgBZQMEASowCwYJYIZIAWUDBAECMAoGCCqGSIb3DQMHMA4GCCqGSIb3 DQMCAgIAgDANBggqhkiG9w0DAgIBQDAHBgUrDgMCBzANBggqhkiG9w0DAgIBKDANBgkqhkiG 9w0BAQEFAASCAQARkLOM+mziP6jxoSER0vGkhRFTJ+UJuIDelhhfv908fbf7Qz0m2iNltpBU EfkTYKtIUOo1ZZdUTioGNTHriIcAE9+cqxIEsPwg4QpcImrJUTJPOQ6yhx+4BZ+bAopGaRJy qEN5/xGflbjpk83BragPNE3Cq+0H/msq2RUbfWK+7kEyQGVYigaXzUrxn3VJ4/BaIQTNOg13 esW/R+sJcvh6oIil5/TN7pxuSKj/NkwfpuYzPlr35Izzdjo88GFrwIF0NwkjXGqWD2ZwLmKh 29t0+G7P1MLazz4+yPY+q19bXv60lg9+rv7jq5xM1640CtRMpllbYWzEN6h2B5HfclbAAAAA AAAA --------------ms040006030805040301050402--

3 3

[Users] Node not connecting
by Nauman Abbas 21 Jan '14

21 Jan '14

Hello there Seem to be going in a problem again. I had installed oVirt node on my server and was running the engine on another machine. Now I had to change the engine machine since that was just a test PC so I got rid of the engine machine. Installed the engine on another machine and now i'm trying to add the node to it. It goes on all well until it reaches the 'termination' stage and then it gives an error "Installation failed. Network error during communication with the host." PS SELinux/ebtables is off on both machines. A little help would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

4 5

[Users] VoIP on virtual infrastructure and oVirt in particular
by Gianluca Cecchi 21 Jan '14

21 Jan '14

Hello, any feedback about VoIP softswitches on virtual servers? I found this positive whitepaper on VMware web site but it seems mostly related to Class5 softswitches (intended for work with end-users): http://www.vmware.com/files/pdf/techpaper/voip-perf-vsphere5.pdf I would like to know about real experiences and Class4 softswitches too (used for transit VoIP traffic between carriers). Thanks in advance, Gianluca

3 2

[Users] Register a disk image via oVirt REST api
by Satya Vempati 20 Jan '14

20 Jan '14

--_000_16669B246DBC4D4EB043E6B646D51CEA2231D8mbx025w1ca8exch02_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I have a disk image (i.e. a file) that I want to register as a disk using t= he REST API. The REST API works with existing disks, but does the API work with disk ima= ges? --_000_16669B246DBC4D4EB043E6B646D51CEA2231D8mbx025w1ca8exch02_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> I have a disk image (i.e. a file) that I want to reg= ister as a disk using the REST API. <o:p></o:p> <o:p> </o:p> The REST API works with existing disks, but does the= API work with disk images?<o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_16669B246DBC4D4EB043E6B646D51CEA2231D8mbx025w1ca8exch02_--

3 11

[Users] oVirt Node ISO for oVirt 3.3 - Draft image for testing
by Fabian Deutsch 20 Jan '14

20 Jan '14

--=-0VuymFCw5CMiaFLyxpM6 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Hey, as many of you have noticed there wasn't any well working oVirt Node ISO around for oVirt 3.3. To get this ball rolling again I've put together a draft image of ALPHA quality. It contains many fixes some of us have been working on over the last weeks. - Source & ISO - To not drown Jenkins in a hell-of-a-patch-queue I've pushed the patches to https://github.com/fabiand/ovirt-node/tree/teamsync The ISO built from that patchset can be found here: http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.2014= 01170926draft.vdsm.el6.iso Please test this draft image and provide feedback on how it works for you. If you encounter problems - and you probably will - please take a look here on how to debug them: http://www.ovirt.org/Node_Troubleshooting - Important Notes - SELinux: Boot this alpha image with enforcing=3D0 to log potential denials, but not block the calls. To fix those denials permanently please attach your /var/log/audit/audit.log to a bug in bugzilla. Known problems: - Exception is raised after registration to Engine - Many bond devices are show on network page - Denials appear in /var/log/audit/audit.log And don't hesitate to reach out to us if you want to get more involved with Node. - fabian --=-0VuymFCw5CMiaFLyxpM6 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part Content-Transfer-Encoding: 7bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQIcBAABAgAGBQJS2Q8IAAoJEC9+uOgSHVGUE4cP/05i7nAgZVXJGhErZeZQlpkn eP6ot4cCRS4MDDOjfkrK54TNvs+CrKMefsvDv4B8NzfnaDHrVjyCFI2+8Yfhj/0/ so/csLBWy1A0LR5tHv4RQBov8Dz74zgMjZxMeGIMuQcQekSmghONK8vQsfpGOtys xytG84MXRTQjrkJt5Wc7V1AKxkH7lHGH21g+IDesnSVUQouA/Zu/x/4A0o/mx/R+ VJow7lNR/PMlMe8fzjFNUrlFYjA0olFGFaeVXfphVjhnIIN2dJABVpb6hXfU25Uy 6rwjr45eS8gL81JjMEm3XwD215WxdlmzVawcVmqcKcrBu7U+eKxFZFYSe4HD7Nnf E4Aw3A5mSK76WFjLyaKwczXl1DyWNdTp1yIPDtX8H5lG2rJpUe23o2yMlqn3IZ5u JjBRjg5EwgHfucxpRRUwdh8tnYIzgp6ejhvgwbY8X8kYwXqSd8Td5mZvM8GBEdif noXrJImIYoU08Q/0acjiOpZ710wqEvPhmL15okXj+3+WFp53aMUdUY8F2amSBj+a ik+Zzpiq0SXTthuAatOUxdTX+Sp0kraV5moV6qBYxXX80wGLg2qzhNA4xZ0vqkc2 ipQOuyceGWCaSziklngY86DNNWzhkaOAyCyTmXDMokSthAITI4LVgsuWIvy2A8Z1 JSMjEl7msdgH/t3OFrjO =oLBg -----END PGP SIGNATURE----- --=-0VuymFCw5CMiaFLyxpM6--

2 6

[Users] virt-v2v: too many IDE bus:
by Markus Stockhausen 20 Jan '14

20 Jan '14

------=_NextPartTM-000-dd723cdf-6ccb-4b19-9baf-8b262252573c Content-Type: multipart/alternative; boundary="_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_" --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, we are currently encountering the above error during virt-v2v migration. There was an older post about it here: http://lists.ovirt.org/pipermail/users/2013-December/018379.html The answers suggest that this is already fixed upstream and that you only need virt-v2v for OS disks. Could someone, explain - how to migrate only the OS disk and to dd the data disks. - if there exist any offical patches to fix the bug. Thanks in advance. Markus --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html dir=3D"ltr"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <style id=3D"owaParaStyle" type=3D"text/css">P {margin-top:0;margin-bottom:= 0;}</style> </head> <body ocsi=3D"0" fpstyle=3D"1"> <div style=3D"direction: ltr;font-family: Tahoma;color: #000000;font-size: = 10pt;">Hello, we are currently encountering the above error during virt-v2v migration. There was an older post about it here: http://lists.ovirt.org/pipermail/users/2013-December/018379.html The answers suggest that this is already fixed upstream and that you only need virt-v2v for OS disks. Could someone, explain - how to migrate only the OS disk and to dd the data disks. - if there exist any offical patches to fix the bug. Thanks in advance. Markus </div> </body> </html> --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D3007EXCHANGEcollogi_-- ------=_NextPartTM-000-dd723cdf-6ccb-4b19-9baf-8b262252573c Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-dd723cdf-6ccb-4b19-9baf-8b262252573c--

3 3

[Users] get VM events via API?
by Sven Kieske 20 Jan '14

20 Jan '14

Hi, is it possible to get the vm events via any API/CLI? I'm talking about the "events" tab which you can select in webadmin when you selected a vm. If this is possible, how can we get the data? We could even write a vdsm hook, if necessary, but would of course prefer REST-API. Thanks. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

4 9

[Users] Network profile lost after host edit
by Simon Barrett 20 Jan '14

20 Jan '14

--_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I have a problem where VM network profiles are lost when editing a host. E.= G. * VM is running fine on the correct network. Network Interfaces tab= shows "nic1" and "Network Name" shows the correct network profile. * I shutdown the VM then right click and Edit. * The General settings for the node shows "nic1 <Empty>". If I then= edit config, something like increasing memory or changing CPU cores then c= lick on OK, the VM configuration is saved without a network profile. * When I boot the VM I cannot connect to it. * I then have to edit the node again configure back in the correct = network profile. Does anyone know if this is a known issue? If not, any suggestions as to ho= w I correct this so that the original network profile definition is retaine= d after an edit? Many thanks, Simon --_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> I have a problem where VM network profiles are lost = when editing a host. E.G.<o:p></o:p> <o:p> </o:p> <![if !supportLists]>·         <![endif]>VM is running fine on the correct network. N= etwork Interfaces tab shows “nic1” and “Network Name&#822= 1; shows the correct network profile.<o:p></o:p> <![if !supportLists]>·         <![endif]>I shutdown the VM then right click and Edit.= <o:p></o:p> <![if !supportLists]>·         <![endif]>The General settings for the node shows &#82= 20;nic1 <Empty>”. If I then edit config, something like increas= ing memory or changing CPU cores then click on OK, the VM configuration is = saved without a network profile.<o:p></o:p> <![if !supportLists]>·         <![endif]>When I boot the VM I cannot connect to it.<o= :p></o:p> <![if !supportLists]>·         <![endif]>I then have to edit the node again configure= back in the correct network profile.<o:p></o:p> <o:p> </o:p> Does anyone know if this is a known issue? If not, a= ny suggestions as to how I correct this so that the original network profil= e definition is retained after an edit?<o:p></o:p> <o:p> </o:p> Many thanks,<o:p></o:p> <o:p> </o:p> Simon<o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_--

4 11

[Users] VM Migration failed
by Edgars M. 20 Jan '14

20 Jan '14

Hi I am experiencing issues with manual VM migration. VM fails to migrate to other node in the same Cluster. Here are some relevant engine.log entries: ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-73) Rerun vm a31cfd62-26fc-4396-8a83-1aed68c7fd39. Called from vds novmnode1 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Failed in MigrateStatusVDS method ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Error code migrateErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Command MigrateStatusVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration Both Engine and Node are running CentOS 6.5 x64. oVirt Engine Version: 3.3.2-1.el6. VDSM version 4.13.2-1. I restarted engine and vdsm, that did not help. Also in vdsm log file I see the following errors related to the same VM ID: Thread-27::ERROR::2014-01-17 16:37:06,271::sampling::355::vm.Vm::(collect) vmId=`a31cfd62-26fc-4396-8a83-1aed68c7fd39`::Stats function failed: <AdvancedStatsFunction _highWrite at 0x26efb58> Any hints? BR Edgars

5 20

[Users] How to Modify Network with Hosted Engine
by Andrew Lau 20 Jan '14

20 Jan '14

Hi, Now that I finally stepped through and have a working hosted engine setup (after opening numerous BZs).. How do I modify network configuration (eg. assign new VLANs to hosts), when I attempt to modify a network it gives the error: Error while executing action Setup Networks: Network is currently being used Is there a recommended way to set up these extra networks, or must all of these be not managed by the engine? Thanks, Andrew

3 7

[Users] Fwd: Disk error
by Koen Vanoppen 20 Jan '14

20 Jan '14

---------- Forwarded message ---------- From: Koen Vanoppen <vanoppen.koen(a)gmail.com> Date: 2014/1/20 Subject: Re: [Users] Disk error To: dron(a)redhat.com Status ok... 2014/1/20 Dafna Ron <dron(a)redhat.com> > and what is the snapshot/disk status in the UI? > > > > > On 01/20/2014 11:08 AM, Koen Vanoppen wrote: > >> Error while executing action: >> >> KV-virt-v2v: >> >> * Cannot remove Snapshot. Disk KV-virt-v2v_Disk2 is being moved or >> copied. >> * Cannot remove Snapshot. Disk LargeTemplate_Disk1 is being moved or >> copied. >> >> >> >> 2014/1/20 Koen Vanoppen <vanoppen.koen(a)gmail.com <mailto: >> vanoppen.koen(a)gmail.com>> >> >> >> Yes, it did. Twice actually. But I already tried that one. This is >> the result: >> >> Error while executing action: >> >> KV-virt-v2v: >> >> * Cannot remove Snapshot. Disk KV-virt-v2v_Disk2 is being moved >> or copied. >> * Cannot remove Snapshot. Disk LargeTemplate_Disk1 is being >> moved or copied. >> >> >> >> >> 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com>> >> >> >> you said that you shut down the vm after you tried migrating? >> can you look at the vm in the UI and see if you have a >> snapshot created during the migration? >> if so, can you try to delete just the snapshot? >> >> >> >> >> >> On 01/20/2014 10:58 AM, Koen Vanoppen wrote: >> >> [root@soyuz ~]# lvs | grep >> ff674bce-aa94-4b46-9f9d-d4182eab1e49 >> Couldn't find device with uuid >> Y5m0SH-HbWl-8PNL-fGkk-oXNF-WyQk-Snhncm. >> ff674bce-aa94-4b46-9f9d-d4182eab1e49 >> f8ddd1d1-5266-493b-879b-f79c128751e2 -wi-ao--- 50,00g >> >> Maybe it's already to another hypervisor or disk domain? >> If there is a *SAVE* way to remove these two disk, tell >> me. The data on it it's not THAT important. >> >> >> >> >> 2014/1/20 Dafna Ron <dron(a)redhat.com >> <mailto:dron@redhat.com> <mailto:dron@redhat.com >> >> <mailto:dron@redhat.com>>> >> >> >> the disk ff674bce-aa94-4b46-9f9d-d4182eab1e49 does not >> exist in >> the domain - which is the master domain >> My guess that it has to do with the failed migration. >> >> can you run lvs and grep for >> ff674bce-aa94-4b46-9f9d-d4182eab1e49 >> lets see where this disk is... >> >> >> >> >> On 01/20/2014 10:44 AM, Koen Vanoppen wrote: >> >> [root@soyuz ~]# vdsClient -s 0 getStorageDomainInfo >> f8ddd1d1-5266-493b-879b-f79c128751e2 >> uuid = f8ddd1d1-5266-493b-879b-f79c128751e2 >> vguuid = i6QHH9-1fZR-HLcn-6Xuo-7jU7-66iu-iuzWfQ >> lver = 13 >> state = OK >> version = 3 >> role = Master >> pool = ['5849b030-626e-47cb-ad90-3ce782d831b3'] >> spm_id = 1 >> type = ISCSI >> class = Data >> master_ver = 1 >> name = StoragePoolEva01 >> >> Thanx for the help! >> >> >> 2014/1/20 Dafna Ron <dron(a)redhat.com >> <mailto:dron@redhat.com> <mailto:dron@redhat.com >> <mailto:dron@redhat.com>> >> <mailto:dron@redhat.com <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>>>> >> >> >> >> can you please run: >> >> vdsClient -s 0 getStorageDomainInfo >> f8ddd1d1-5266-493b-879b-f79c128751e2 >> >> >> >> On 01/20/2014 10:33 AM, Koen Vanoppen wrote: >> >> [root@soyuz ~]# vdsClient -s 0 >> getStorageDomainsList >> f3fd055b-2764-44ed-9d77-81bd58984842 >> 94de241c-bf5c-4630-9af3-7e31b902ae77 >> f8ddd1d1-5266-493b-879b-f79c128751e2 >> 50cf24a4-d1ef-4105-a9a5-b81d91339175 >> 83b1867f-4aea-400e-9ce0-efbd5add4216 >> >> (soyuz=vdsmhost3) >> >> >> 2014/1/20 Dafna Ron <dron(a)redhat.com >> <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>> >> <mailto:dron@redhat.com <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>>> >> <mailto:dron@redhat.com >> <mailto:dron@redhat.com> <mailto:dron@redhat.com >> <mailto:dron@redhat.com>> >> <mailto:dron@redhat.com <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>>>>> >> >> >> >> let's try to sift through :) >> >> can you run vdsClient -s 0 >> getStorageDomainsList? >> >> >> >> >> >> On 01/20/2014 09:52 AM, Meital >> Bourvine wrote: >> >> It seems that your setup is >> completely messed >> up. I >> see the >> following 3 errors all the time (I >> couldn't >> actually >> find the >> live storage migration error, >> since there are >> too many >> errors): >> >> Thread-118::ERROR::2014-01-20 >> 07:59:17,066::sampling::355::vm.Vm::(collect) >> vmId=`f8c6190c-b722-4fcd-af17-21572151fcef`::Stats >> function >> failed: <AdvancedStatsFunction >> _highWrite at >> 0x27b41b8> >> Traceback (most recent call last): >> File >> "/usr/share/vdsm/sampling.py", line >> 351, in collect >> statsFunction() >> File >> "/usr/share/vdsm/sampling.py", line 226, in >> __call__ >> retValue = >> self._function(*args, **kwargs) >> File "/usr/share/vdsm/vm.py", >> line 509, in >> _highWrite >> if not vmDrive.blockDev or >> vmDrive.format >> != 'cow': >> AttributeError: 'Drive' object has no >> attribute 'format' >> >> PolicyEngine::DEBUG::2014-01-20 >> 07:59:17,198::libvirtconnection::108:: >> libvirtconnection::(wrapper) >> Unknown libvirterror: ecode: 8 >> edom: 10 level: >> 2 message: >> invalid argument: cannot set >> memory higher >> than max memory >> PolicyEngine::ERROR::2014-01-20 >> 07:59:17,199::vm::4359::vm.Vm::(reportError) >> vmId=`ce626f90-41c4-4417-9e53-bf4066ad062d`::Set new >> balloon >> target failed >> Traceback (most recent call last): >> File "/usr/share/vdsm/vm.py", >> line 4371, in >> setBalloonTarget >> self._dom.setMemory(target) >> File "/usr/share/vdsm/vm.py", >> line 835, in f >> ret = attr(*args, **kwargs) >> File >> "/usr/lib64/python2.6/site-packages/vdsm/ >> libvirtconnection.py", >> line >> 76, in wrapper >> ret = f(*args, **kwargs) >> File >> "/usr/lib64/python2.6/site-packages/libvirt.py", >> line >> 1410, in setMemory >> if ret == -1: raise libvirtError >> ('virDomainSetMemory() >> failed', dom=self) >> libvirtError: invalid argument: >> cannot set memory >> higher than >> max memory >> >> Thread-51::ERROR::2014-01-20 >> 07:59:22,109::sampling::355::vm.Vm::(collect) >> vmId=`493128c0-aba9-4b38-bf18-2778b910917f`::Stats >> function >> failed: <AdvancedStatsFunction >> _highWrite at >> 0x27b41b8> >> Traceback (most recent call last): >> File >> "/usr/share/vdsm/sampling.py", line >> 351, in collect >> statsFunction() >> File >> "/usr/share/vdsm/sampling.py", line 226, in >> __call__ >> retValue = >> self._function(*args, **kwargs) >> File "/usr/share/vdsm/vm.py", >> line 513, in >> _highWrite >> self._vm._dom.blockInfo(vmDrive.path, 0) >> File "/usr/share/vdsm/vm.py", >> line 835, in f >> ret = attr(*args, **kwargs) >> File >> "/usr/lib64/python2.6/site-packages/vdsm/ >> libvirtconnection.py", >> line >> 76, in wrapper >> ret = f(*args, **kwargs) >> File >> "/usr/lib64/python2.6/site-packages/libvirt.py", >> line >> 1797, in blockInfo >> if ret is None: raise libvirtError >> ('virDomainGetBlockInfo() failed', dom=self) >> libvirtError: invalid argument: >> invalid path >> /rhev/data-center/mnt/blockSD/f8ddd1d1-5266-493b-879b- >> f79c128751e2/images/b8da8541-9a0d-4c18-8aa8-50fc6225f18a/ >> ff674bce-aa94-4b46-9f9d-d4182eab1e49 >> not assigned to domain >> >> >> ------------------------------------------------------------ >> ------------ >> >> >> >> *From: *"Koen Vanoppen" >> <vanoppen.koen(a)gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>>>> >> *To: *users(a)ovirt.org >> <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> <mailto:users@ovirt.org >> <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>>, "Meital >> >> Bourvine" <mbourvin(a)redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>> <mailto:mbourvin@redhat.com >> >> <mailto:mbourvin@redhat.com> >> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> >> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>>>> >> *Sent: *Monday, January 20, >> 2014 9:39:10 AM >> *Subject: *Re: [Users] Disk error >> >> >> vdsm-4.13.0-11.el6.x86_64 >> :-) >> >> >> >> 2014/1/20 Meital Bourvine >> <mbourvin(a)redhat.com <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>>>>> >> >> >> >> First of all, I opened a >> bug about 'Drive' >> object has no >> attribute 'format': >> https://bugzilla.redhat.com/show_bug.cgi?id=1055437 >> >> Please send me the output >> of `rpm -q >> vdsm` so I'll >> update the >> version in the bug. >> >> Also, it's better to send >> the logs to >> the list >> (and >> not only >> to me), so more people >> will be able to >> help >> you debug it. >> >> ----- Original Message ----- >> > From: "Dafna Ron" >> <dron(a)redhat.com <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>> >> <mailto:dron@redhat.com >> <mailto:dron@redhat.com> <mailto:dron@redhat.com >> <mailto:dron@redhat.com>>> >> <mailto:dron@redhat.com >> <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>> >> <mailto:dron@redhat.com <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>>>> >> <mailto:dron@redhat.com >> <mailto:dron@redhat.com> <mailto:dron@redhat.com >> <mailto:dron@redhat.com>> >> <mailto:dron@redhat.com <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>>> >> <mailto:dron@redhat.com >> <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>> >> <mailto:dron@redhat.com <mailto:dron@redhat.com> >> <mailto:dron@redhat.com <mailto:dron@redhat.com>>>>>> >> >> > To: "Meital Bourvine" >> <mbourvin(a)redhat.com <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>>> >> <mailto: >> mbourvin(a)redhat.com <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com> >> <mailto:mbourvin@redhat.com >> <mailto:mbourvin@redhat.com>>>>>> >> > Cc: "Koen Vanoppen" >> <vanoppen.koen(a)gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>>> >> <mailto: >> vanoppen.koen(a)gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>>>>>, users(a)ovirt.org >> <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> <mailto:users@ovirt.org >> <mailto:users@ovirt.org>>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> <mailto:users@ovirt.org >> <mailto:users@ovirt.org>>> >> <mailto:users@ovirt.org <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> <mailto:users@ovirt.org >> <mailto:users@ovirt.org>>>>> >> >> >> > Sent: Monday, January >> 20, 2014 >> 8:49:32 AM >> > Subject: Re: [Users] >> Disk error >> > >> > from the errors you are >> getting, >> disk status >> in db >> is locked. >> > >> > >> > On 01/20/2014 08:38 AM, >> Meital >> Bourvine wrote: >> > > Hi Koen, >> > > >> > > What is the error that >> you got >> when live >> storage >> migration >> failed? >> > > Can you please attach >> vdsm.log and >> engine.log >> > > >> > > *From: *"Koen Vanoppen" >> <vanoppen.koen(a)gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>>> >> <mailto: >> vanoppen.koen(a)gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>> >> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com> >> <mailto:vanoppen.koen@gmail.com >> <mailto:vanoppen.koen@gmail.com>>>>>> >> > > *To: *users(a)ovirt.org >> <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> <mailto:users@ovirt.org >> <mailto:users@ovirt.org>>> >> <mailto:users@ovirt.org <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> <mailto:users@ovirt.org >> <mailto:users@ovirt.org>>>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>>> >> <mailto:users@ovirt.org >> <mailto:users@ovirt.org> <mailto:users@ovirt.org >> <mailto:users@ovirt.org>> >> <mailto:users@ovirt.org <mailto:users@ovirt.org> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>>> >> >> >> > > *Sent: *Monday, >> January 20, 2014 >> 5:30:51 AM >> > > *Subject: *[Users] >> Disk error >> > > >> > > Hi all! >> > > >> > > I got a kind of a >> strange >> error in ovirt. >> THere was a >> problem with >> > > a vm that was >> complaining >> about low disk >> space. (in >> terms of >> > > storage space of the >> storage >> center). >> So I did >> a live >> migration of >> > > the vm's disk. This >> failed, so >> I did a >> shutdown of the >> vm, to see >> > > if that would help, >> but now I >> can't >> get the VM >> back up >> again. >> > > Neither can I remove >> the disk or >> deactivate >> the dis. >> This is the >> > > error: >> > > Keep in mind that >> the vm is >> down and >> he had 2 >> disks... >> > > >> > > While trying to >> deactivate the >> disk: >> > > >> > > Error while >> executing action: >> > > >> > > KV-virt-v2v: >> > > >> > > * Cannot hot >> unplug Virtual >> Machine >> Disk. Disk >> KV-virt-v2v_Disk2 >> > > is being moved >> or copied. >> > > >> > > >> > > When I try to simply >> remove >> the vm: >> > > >> > > Error while >> executing action: >> > > >> > > KV-virt-v2v: >> > > >> > > * Cannot remove >> VM. Disk >> KV-virt-v2v_Disk2 >> is being >> moved or copied. >> > > * Cannot remove >> VM. Disk >> LargeTemplate_Disk1 is >> being moved or >> > > copied. >> > > >> > > >> > > Kind regards, >> > > >> > > Koen >> > > >> > > >> _______________________________________________ >> > > Users mailing list >> > > Users(a)ovirt.org >> <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> >> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>>> >> >> >> > > >> http://lists.ovirt.org/mailman/listinfo/users >> > > >> > > >> > > >> > > >> > > >> _______________________________________________ >> > > Users mailing list >> > > Users(a)ovirt.org >> <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> >> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>>> >> >> >> > > >> http://lists.ovirt.org/mailman/listinfo/users >> > >> > >> > -- >> > Dafna Ron >> > >> >> >> >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org>> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> -- Dafna Ron >> >> >> us >> >> -- Dafna Ron >> >> >> >> >> -- Dafna Ron >> >> >> >> >> -- Dafna Ron >> >> >> >> > > -- > Dafna Ron >

1 0

Re: [Users] Disk error
by Koen Vanoppen 20 Jan '14

20 Jan '14

Error while executing action: KV-virt-v2v: - Cannot remove Snapshot. Disk KV-virt-v2v_Disk2 is being moved or copied. - Cannot remove Snapshot. Disk LargeTemplate_Disk1 is being moved or copied. 2014/1/20 Koen Vanoppen <vanoppen.koen(a)gmail.com> > Yes, it did. Twice actually. But I already tried that one. This is the > result: > > Error while executing action: > > KV-virt-v2v: > > - Cannot remove Snapshot. Disk KV-virt-v2v_Disk2 is being moved or > copied. > - Cannot remove Snapshot. Disk LargeTemplate_Disk1 is being moved or > copied. > > > > > 2014/1/20 Dafna Ron <dron(a)redhat.com> > >> you said that you shut down the vm after you tried migrating? >> can you look at the vm in the UI and see if you have a snapshot created >> during the migration? >> if so, can you try to delete just the snapshot? >> >> >> >> >> >> On 01/20/2014 10:58 AM, Koen Vanoppen wrote: >> >>> [root@soyuz ~]# lvs | grep ff674bce-aa94-4b46-9f9d-d4182eab1e49 >>> Couldn't find device with uuid Y5m0SH-HbWl-8PNL-fGkk-oXNF-WyQk-Snhncm. >>> ff674bce-aa94-4b46-9f9d-d4182eab1e49 f8ddd1d1-5266-493b-879b-f79c128751e2 >>> -wi-ao--- 50,00g >>> >>> Maybe it's already to another hypervisor or disk domain? If there is a >>> *SAVE* way to remove these two disk, tell me. The data on it it's not THAT >>> important. >>> >>> >>> >>> >>> 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com>> >>> >>> >>> the disk ff674bce-aa94-4b46-9f9d-d4182eab1e49 does not exist in >>> the domain - which is the master domain >>> My guess that it has to do with the failed migration. >>> >>> can you run lvs and grep for ff674bce-aa94-4b46-9f9d-d4182eab1e49 >>> lets see where this disk is... >>> >>> >>> >>> >>> On 01/20/2014 10:44 AM, Koen Vanoppen wrote: >>> >>> [root@soyuz ~]# vdsClient -s 0 getStorageDomainInfo >>> f8ddd1d1-5266-493b-879b-f79c128751e2 >>> uuid = f8ddd1d1-5266-493b-879b-f79c128751e2 >>> vguuid = i6QHH9-1fZR-HLcn-6Xuo-7jU7-66iu-iuzWfQ >>> lver = 13 >>> state = OK >>> version = 3 >>> role = Master >>> pool = ['5849b030-626e-47cb-ad90-3ce782d831b3'] >>> spm_id = 1 >>> type = ISCSI >>> class = Data >>> master_ver = 1 >>> name = StoragePoolEva01 >>> >>> Thanx for the help! >>> >>> >>> 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com> >>> <mailto:dron@redhat.com <mailto:dron@redhat.com>>> >>> >>> >>> >>> can you please run: >>> >>> vdsClient -s 0 getStorageDomainInfo >>> f8ddd1d1-5266-493b-879b-f79c128751e2 >>> >>> >>> >>> On 01/20/2014 10:33 AM, Koen Vanoppen wrote: >>> >>> [root@soyuz ~]# vdsClient -s 0 getStorageDomainsList >>> f3fd055b-2764-44ed-9d77-81bd58984842 >>> 94de241c-bf5c-4630-9af3-7e31b902ae77 >>> f8ddd1d1-5266-493b-879b-f79c128751e2 >>> 50cf24a4-d1ef-4105-a9a5-b81d91339175 >>> 83b1867f-4aea-400e-9ce0-efbd5add4216 >>> >>> (soyuz=vdsmhost3) >>> >>> >>> 2014/1/20 Dafna Ron <dron(a)redhat.com >>> <mailto:dron@redhat.com> <mailto:dron@redhat.com >>> <mailto:dron@redhat.com>> >>> <mailto:dron@redhat.com <mailto:dron@redhat.com> >>> <mailto:dron@redhat.com <mailto:dron@redhat.com>>>> >>> >>> >>> >>> let's try to sift through :) >>> >>> can you run vdsClient -s 0 getStorageDomainsList? >>> >>> >>> >>> >>> >>> On 01/20/2014 09:52 AM, Meital Bourvine wrote: >>> >>> It seems that your setup is completely messed >>> up. I >>> see the >>> following 3 errors all the time (I couldn't >>> actually >>> find the >>> live storage migration error, since there are >>> too many >>> errors): >>> >>> Thread-118::ERROR::2014-01-20 >>> 07:59:17,066::sampling::355::vm.Vm::(collect) >>> vmId=`f8c6190c-b722-4fcd-af17- >>> 21572151fcef`::Stats >>> function >>> failed: <AdvancedStatsFunction _highWrite at >>> 0x27b41b8> >>> Traceback (most recent call last): >>> File "/usr/share/vdsm/sampling.py", line >>> 351, in collect >>> statsFunction() >>> File "/usr/share/vdsm/sampling.py", line 226, >>> in >>> __call__ >>> retValue = self._function(*args, **kwargs) >>> File "/usr/share/vdsm/vm.py", line 509, in >>> _highWrite >>> if not vmDrive.blockDev or vmDrive.format >>> != 'cow': >>> AttributeError: 'Drive' object has no >>> attribute 'format' >>> >>> PolicyEngine::DEBUG::2014-01-20 >>> 07:59:17,198:: >>> libvirtconnection::108::libvirtconnection::(wrapper) >>> Unknown libvirterror: ecode: 8 edom: 10 level: >>> 2 message: >>> invalid argument: cannot set memory higher >>> than max memory >>> PolicyEngine::ERROR::2014-01-20 >>> 07:59:17,199::vm::4359::vm.Vm::(reportError) >>> vmId=`ce626f90-41c4-4417-9e53-bf4066ad062d`::Set >>> new >>> balloon >>> target failed >>> Traceback (most recent call last): >>> File "/usr/share/vdsm/vm.py", line 4371, in >>> setBalloonTarget >>> self._dom.setMemory(target) >>> File "/usr/share/vdsm/vm.py", line 835, in f >>> ret = attr(*args, **kwargs) >>> File >>> "/usr/lib64/python2.6/site- >>> packages/vdsm/libvirtconnection.py", >>> line >>> 76, in wrapper >>> ret = f(*args, **kwargs) >>> File >>> "/usr/lib64/python2.6/site-packages/libvirt.py", line >>> 1410, in setMemory >>> if ret == -1: raise libvirtError >>> ('virDomainSetMemory() >>> failed', dom=self) >>> libvirtError: invalid argument: cannot set memory >>> higher than >>> max memory >>> >>> Thread-51::ERROR::2014-01-20 >>> 07:59:22,109::sampling::355::vm.Vm::(collect) >>> vmId=`493128c0-aba9-4b38-bf18- >>> 2778b910917f`::Stats >>> function >>> failed: <AdvancedStatsFunction _highWrite at >>> 0x27b41b8> >>> Traceback (most recent call last): >>> File "/usr/share/vdsm/sampling.py", line >>> 351, in collect >>> statsFunction() >>> File "/usr/share/vdsm/sampling.py", line 226, >>> in >>> __call__ >>> retValue = self._function(*args, **kwargs) >>> File "/usr/share/vdsm/vm.py", line 513, in >>> _highWrite >>> self._vm._dom.blockInfo(vmDrive.path, 0) >>> File "/usr/share/vdsm/vm.py", line 835, in f >>> ret = attr(*args, **kwargs) >>> File >>> "/usr/lib64/python2.6/site- >>> packages/vdsm/libvirtconnection.py", >>> line >>> 76, in wrapper >>> ret = f(*args, **kwargs) >>> File >>> "/usr/lib64/python2.6/site-packages/libvirt.py", line >>> 1797, in blockInfo >>> if ret is None: raise libvirtError >>> ('virDomainGetBlockInfo() failed', dom=self) >>> libvirtError: invalid argument: invalid path >>> /rhev/data-center/mnt/blockSD/ >>> f8ddd1d1-5266-493b-879b-f79c128751e2/images/b8da8541- >>> 9a0d-4c18-8aa8-50fc6225f18a/ff674bce-aa94-4b46-9f9d-d4182eab1e49 >>> not assigned to domain >>> >>> >>> ------------------------------ >>> ------------------------------------------ >>> >>> >>> >>> *From: *"Koen Vanoppen" >>> <vanoppen.koen(a)gmail.com <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>>>> >>> *To: *users(a)ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>, "Meital >>> >>> Bourvine" <mbourvin(a)redhat.com >>> <mailto:mbourvin@redhat.com> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com >>> >>> <mailto:mbourvin@redhat.com> >>> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>>>> >>> *Sent: *Monday, January 20, 2014 9:39:10 AM >>> *Subject: *Re: [Users] Disk error >>> >>> >>> vdsm-4.13.0-11.el6.x86_64 >>> :-) >>> >>> >>> >>> 2014/1/20 Meital Bourvine >>> <mbourvin(a)redhat.com <mailto:mbourvin@redhat.com> >>> <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com >>> >> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>>> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>>>>> >>> >>> >>> >>> First of all, I opened a bug about >>> 'Drive' >>> object has no >>> attribute 'format': >>> https://bugzilla.redhat.com/show_bug.cgi?id=1055437 >>> >>> Please send me the output of `rpm -q >>> vdsm` so I'll >>> update the >>> version in the bug. >>> >>> Also, it's better to send the logs to >>> the list >>> (and >>> not only >>> to me), so more people will be able to >>> help >>> you debug it. >>> >>> ----- Original Message ----- >>> > From: "Dafna Ron" <dron(a)redhat.com >>> <mailto:dron@redhat.com> >>> <mailto:dron@redhat.com <mailto:dron@redhat.com>> >>> <mailto:dron@redhat.com >>> <mailto:dron@redhat.com> <mailto:dron@redhat.com >>> <mailto:dron@redhat.com>>> >>> <mailto:dron@redhat.com <mailto:dron@redhat.com> >>> <mailto:dron@redhat.com <mailto:dron@redhat.com>> >>> <mailto:dron@redhat.com >>> <mailto:dron@redhat.com> <mailto:dron@redhat.com >>> <mailto:dron@redhat.com>>>>> >>> > To: "Meital Bourvine" >>> <mbourvin(a)redhat.com <mailto:mbourvin@redhat.com> >>> <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com >>> >> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>>> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com> >>> <mailto:mbourvin@redhat.com >>> <mailto:mbourvin@redhat.com>>>>> >>> > Cc: "Koen Vanoppen" >>> <vanoppen.koen(a)gmail.com <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>>> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>>>>>, users(a)ovirt.org >>> <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> >>> >>> >>> > Sent: Monday, January 20, 2014 >>> 8:49:32 AM >>> > Subject: Re: [Users] Disk error >>> > >>> > from the errors you are getting, >>> disk status >>> in db >>> is locked. >>> > >>> > >>> > On 01/20/2014 08:38 AM, Meital >>> Bourvine wrote: >>> > > Hi Koen, >>> > > >>> > > What is the error that you got >>> when live >>> storage >>> migration >>> failed? >>> > > Can you please attach vdsm.log and >>> engine.log >>> > > >>> > > *From: *"Koen Vanoppen" >>> <vanoppen.koen(a)gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com <mailto:vanoppen.koen@gmail.com >>> >>> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>> >>> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com> >>> <mailto:vanoppen.koen@gmail.com >>> <mailto:vanoppen.koen@gmail.com>>>>> >>> > > *To: *users(a)ovirt.org >>> <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> >>> >>> >>> > > *Sent: *Monday, January 20, 2014 >>> 5:30:51 AM >>> > > *Subject: *[Users] Disk error >>> > > >>> > > Hi all! >>> > > >>> > > I got a kind of a strange >>> error in ovirt. >>> THere was a >>> problem with >>> > > a vm that was complaining >>> about low disk >>> space. (in >>> terms of >>> > > storage space of the storage >>> center). >>> So I did >>> a live >>> migration of >>> > > the vm's disk. This failed, so >>> I did a >>> shutdown of the >>> vm, to see >>> > > if that would help, but now I >>> can't >>> get the VM >>> back up >>> again. >>> > > Neither can I remove the disk or >>> deactivate >>> the dis. >>> This is the >>> > > error: >>> > > Keep in mind that the vm is >>> down and >>> he had 2 >>> disks... >>> > > >>> > > While trying to deactivate the >>> disk: >>> > > >>> > > Error while executing action: >>> > > >>> > > KV-virt-v2v: >>> > > >>> > > * Cannot hot unplug Virtual >>> Machine >>> Disk. Disk >>> KV-virt-v2v_Disk2 >>> > > is being moved or copied. >>> > > >>> > > >>> > > When I try to simply remove >>> the vm: >>> > > >>> > > Error while executing action: >>> > > >>> > > KV-virt-v2v: >>> > > >>> > > * Cannot remove VM. Disk >>> KV-virt-v2v_Disk2 >>> is being >>> moved or copied. >>> > > * Cannot remove VM. Disk >>> LargeTemplate_Disk1 is >>> being moved or >>> > > copied. >>> > > >>> > > >>> > > Kind regards, >>> > > >>> > > Koen >>> > > >>> > > >>> _______________________________________________ >>> > > Users mailing list >>> > > Users(a)ovirt.org >>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> >>> >>> >>> > > >>> http://lists.ovirt.org/mailman/listinfo/users >>> > > >>> > > >>> > > >>> > > >>> > > >>> _______________________________________________ >>> > > Users mailing list >>> > > Users(a)ovirt.org >>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> >>> >>> >>> > > >>> http://lists.ovirt.org/mailman/listinfo/users >>> > >>> > >>> > -- >>> > Dafna Ron >>> > >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> -- Dafna Ron >>> >>> >>> us >>> >>> -- Dafna Ron >>> >>> >>> >>> >>> -- Dafna Ron >>> >>> >>> >> >> -- >> Dafna Ron >> > >

2 1

Re: [Users] Disk error
by Dafna Ron 20 Jan '14

20 Jan '14

you said that you shut down the vm after you tried migrating? can you look at the vm in the UI and see if you have a snapshot created during the migration? if so, can you try to delete just the snapshot? On 01/20/2014 10:58 AM, Koen Vanoppen wrote: > [root@soyuz ~]# lvs | grep ff674bce-aa94-4b46-9f9d-d4182eab1e49 > Couldn't find device with uuid Y5m0SH-HbWl-8PNL-fGkk-oXNF-WyQk-Snhncm. > ff674bce-aa94-4b46-9f9d-d4182eab1e49 > f8ddd1d1-5266-493b-879b-f79c128751e2 -wi-ao--- 50,00g > > Maybe it's already to another hypervisor or disk domain? If there is a > *SAVE* way to remove these two disk, tell me. The data on it it's not > THAT important. > > > > > 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com>> > > the disk ff674bce-aa94-4b46-9f9d-d4182eab1e49 does not exist in > the domain - which is the master domain > My guess that it has to do with the failed migration. > > can you run lvs and grep for ff674bce-aa94-4b46-9f9d-d4182eab1e49 > lets see where this disk is... > > > > > On 01/20/2014 10:44 AM, Koen Vanoppen wrote: > > [root@soyuz ~]# vdsClient -s 0 getStorageDomainInfo > f8ddd1d1-5266-493b-879b-f79c128751e2 > uuid = f8ddd1d1-5266-493b-879b-f79c128751e2 > vguuid = i6QHH9-1fZR-HLcn-6Xuo-7jU7-66iu-iuzWfQ > lver = 13 > state = OK > version = 3 > role = Master > pool = ['5849b030-626e-47cb-ad90-3ce782d831b3'] > spm_id = 1 > type = ISCSI > class = Data > master_ver = 1 > name = StoragePoolEva01 > > Thanx for the help! > > > 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com> > <mailto:dron@redhat.com <mailto:dron@redhat.com>>> > > > can you please run: > > vdsClient -s 0 getStorageDomainInfo > f8ddd1d1-5266-493b-879b-f79c128751e2 > > > > On 01/20/2014 10:33 AM, Koen Vanoppen wrote: > > [root@soyuz ~]# vdsClient -s 0 getStorageDomainsList > f3fd055b-2764-44ed-9d77-81bd58984842 > 94de241c-bf5c-4630-9af3-7e31b902ae77 > f8ddd1d1-5266-493b-879b-f79c128751e2 > 50cf24a4-d1ef-4105-a9a5-b81d91339175 > 83b1867f-4aea-400e-9ce0-efbd5add4216 > > (soyuz=vdsmhost3) > > > 2014/1/20 Dafna Ron <dron(a)redhat.com > <mailto:dron@redhat.com> <mailto:dron@redhat.com > <mailto:dron@redhat.com>> > <mailto:dron@redhat.com <mailto:dron@redhat.com> > <mailto:dron@redhat.com <mailto:dron@redhat.com>>>> > > > > let's try to sift through :) > > can you run vdsClient -s 0 getStorageDomainsList? > > > > > > On 01/20/2014 09:52 AM, Meital Bourvine wrote: > > It seems that your setup is completely messed > up. I > see the > following 3 errors all the time (I couldn't > actually > find the > live storage migration error, since there are > too many > errors): > > Thread-118::ERROR::2014-01-20 > 07:59:17,066::sampling::355::vm.Vm::(collect) > vmId=`f8c6190c-b722-4fcd-af17-21572151fcef`::Stats > function > failed: <AdvancedStatsFunction _highWrite at > 0x27b41b8> > Traceback (most recent call last): > File "/usr/share/vdsm/sampling.py", line > 351, in collect > statsFunction() > File "/usr/share/vdsm/sampling.py", line 226, in > __call__ > retValue = self._function(*args, **kwargs) > File "/usr/share/vdsm/vm.py", line 509, in > _highWrite > if not vmDrive.blockDev or vmDrive.format > != 'cow': > AttributeError: 'Drive' object has no > attribute 'format' > > PolicyEngine::DEBUG::2014-01-20 > > 07:59:17,198::libvirtconnection::108::libvirtconnection::(wrapper) > Unknown libvirterror: ecode: 8 edom: 10 level: > 2 message: > invalid argument: cannot set memory higher > than max memory > PolicyEngine::ERROR::2014-01-20 > 07:59:17,199::vm::4359::vm.Vm::(reportError) > > vmId=`ce626f90-41c4-4417-9e53-bf4066ad062d`::Set new > balloon > target failed > Traceback (most recent call last): > File "/usr/share/vdsm/vm.py", line 4371, in > setBalloonTarget > self._dom.setMemory(target) > File "/usr/share/vdsm/vm.py", line 835, in f > ret = attr(*args, **kwargs) > File > > "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", > line > 76, in wrapper > ret = f(*args, **kwargs) > File > "/usr/lib64/python2.6/site-packages/libvirt.py", line > 1410, in setMemory > if ret == -1: raise libvirtError > ('virDomainSetMemory() > failed', dom=self) > libvirtError: invalid argument: cannot set memory > higher than > max memory > > Thread-51::ERROR::2014-01-20 > 07:59:22,109::sampling::355::vm.Vm::(collect) > vmId=`493128c0-aba9-4b38-bf18-2778b910917f`::Stats > function > failed: <AdvancedStatsFunction _highWrite at > 0x27b41b8> > Traceback (most recent call last): > File "/usr/share/vdsm/sampling.py", line > 351, in collect > statsFunction() > File "/usr/share/vdsm/sampling.py", line 226, in > __call__ > retValue = self._function(*args, **kwargs) > File "/usr/share/vdsm/vm.py", line 513, in > _highWrite > self._vm._dom.blockInfo(vmDrive.path, 0) > File "/usr/share/vdsm/vm.py", line 835, in f > ret = attr(*args, **kwargs) > File > > "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", > line > 76, in wrapper > ret = f(*args, **kwargs) > File > "/usr/lib64/python2.6/site-packages/libvirt.py", line > 1797, in blockInfo > if ret is None: raise libvirtError > ('virDomainGetBlockInfo() failed', dom=self) > libvirtError: invalid argument: invalid path > > /rhev/data-center/mnt/blockSD/f8ddd1d1-5266-493b-879b-f79c128751e2/images/b8da8541-9a0d-4c18-8aa8-50fc6225f18a/ff674bce-aa94-4b46-9f9d-d4182eab1e49 > not assigned to domain > > > > ------------------------------------------------------------------------ > > > > *From: *"Koen Vanoppen" > <vanoppen.koen(a)gmail.com <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>>> > *To: *users(a)ovirt.org > <mailto:users@ovirt.org> <mailto:users@ovirt.org > <mailto:users@ovirt.org>> > <mailto:users@ovirt.org <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>>>, "Meital > > Bourvine" <mbourvin(a)redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> > > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>>> > *Sent: *Monday, January 20, 2014 9:39:10 AM > *Subject: *Re: [Users] Disk error > > > vdsm-4.13.0-11.el6.x86_64 > :-) > > > > 2014/1/20 Meital Bourvine > <mbourvin(a)redhat.com <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>>>> > > > > First of all, I opened a bug about 'Drive' > object has no > attribute 'format': > https://bugzilla.redhat.com/show_bug.cgi?id=1055437 > > Please send me the output of `rpm -q > vdsm` so I'll > update the > version in the bug. > > Also, it's better to send the logs to > the list > (and > not only > to me), so more people will be able to > help > you debug it. > > ----- Original Message ----- > > From: "Dafna Ron" <dron(a)redhat.com > <mailto:dron@redhat.com> > <mailto:dron@redhat.com <mailto:dron@redhat.com>> > <mailto:dron@redhat.com > <mailto:dron@redhat.com> <mailto:dron@redhat.com > <mailto:dron@redhat.com>>> > <mailto:dron@redhat.com <mailto:dron@redhat.com> > <mailto:dron@redhat.com <mailto:dron@redhat.com>> > <mailto:dron@redhat.com > <mailto:dron@redhat.com> <mailto:dron@redhat.com > <mailto:dron@redhat.com>>>>> > > To: "Meital Bourvine" > <mbourvin(a)redhat.com <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>>>> > > Cc: "Koen Vanoppen" > <vanoppen.koen(a)gmail.com <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>>>>, users(a)ovirt.org > <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>> > <mailto:users@ovirt.org > <mailto:users@ovirt.org> <mailto:users@ovirt.org > <mailto:users@ovirt.org>>> > <mailto:users@ovirt.org > <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>> > <mailto:users@ovirt.org <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> > > > Sent: Monday, January 20, 2014 > 8:49:32 AM > > Subject: Re: [Users] Disk error > > > > from the errors you are getting, > disk status > in db > is locked. > > > > > > On 01/20/2014 08:38 AM, Meital > Bourvine wrote: > > > Hi Koen, > > > > > > What is the error that you got > when live > storage > migration > failed? > > > Can you please attach vdsm.log and > engine.log > > > > > > *From: *"Koen Vanoppen" > <vanoppen.koen(a)gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com <mailto:vanoppen.koen@gmail.com>>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>> > > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>>>> > > > *To: *users(a)ovirt.org > <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>> > <mailto:users@ovirt.org <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>>> > <mailto:users@ovirt.org > <mailto:users@ovirt.org> <mailto:users@ovirt.org > <mailto:users@ovirt.org>> > <mailto:users@ovirt.org <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> > > > > > *Sent: *Monday, January 20, 2014 > 5:30:51 AM > > > *Subject: *[Users] Disk error > > > > > > Hi all! > > > > > > I got a kind of a strange > error in ovirt. > THere was a > problem with > > > a vm that was complaining > about low disk > space. (in > terms of > > > storage space of the storage > center). > So I did > a live > migration of > > > the vm's disk. This failed, so > I did a > shutdown of the > vm, to see > > > if that would help, but now I > can't > get the VM > back up > again. > > > Neither can I remove the disk or > deactivate > the dis. > This is the > > > error: > > > Keep in mind that the vm is > down and > he had 2 > disks... > > > > > > While trying to deactivate the > disk: > > > > > > Error while executing action: > > > > > > KV-virt-v2v: > > > > > > * Cannot hot unplug Virtual > Machine > Disk. Disk > KV-virt-v2v_Disk2 > > > is being moved or copied. > > > > > > > > > When I try to simply remove > the vm: > > > > > > Error while executing action: > > > > > > KV-virt-v2v: > > > > > > * Cannot remove VM. Disk > KV-virt-v2v_Disk2 > is being > moved or copied. > > > * Cannot remove VM. Disk > LargeTemplate_Disk1 is > being moved or > > > copied. > > > > > > > > > Kind regards, > > > > > > Koen > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > <mailto:Users@ovirt.org> <mailto:Users@ovirt.org > <mailto:Users@ovirt.org>> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> > <mailto:Users@ovirt.org > <mailto:Users@ovirt.org> <mailto:Users@ovirt.org > <mailto:Users@ovirt.org>> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> > > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > <mailto:Users@ovirt.org> <mailto:Users@ovirt.org > <mailto:Users@ovirt.org>> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> > <mailto:Users@ovirt.org > <mailto:Users@ovirt.org> <mailto:Users@ovirt.org > <mailto:Users@ovirt.org>> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> > > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > > Dafna Ron > > > > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> > http://lists.ovirt.org/mailman/listinfo/users > > > > -- Dafna Ron > > > us > > -- Dafna Ron > > > > > -- > Dafna Ron > > -- Dafna Ron

1 0

Re: [Users] Disk error
by Dafna Ron 20 Jan '14

20 Jan '14

the disk ff674bce-aa94-4b46-9f9d-d4182eab1e49 does not exist in the domain - which is the master domain My guess that it has to do with the failed migration. can you run lvs and grep for ff674bce-aa94-4b46-9f9d-d4182eab1e49 lets see where this disk is... On 01/20/2014 10:44 AM, Koen Vanoppen wrote: > [root@soyuz ~]# vdsClient -s 0 getStorageDomainInfo > f8ddd1d1-5266-493b-879b-f79c128751e2 > uuid = f8ddd1d1-5266-493b-879b-f79c128751e2 > vguuid = i6QHH9-1fZR-HLcn-6Xuo-7jU7-66iu-iuzWfQ > lver = 13 > state = OK > version = 3 > role = Master > pool = ['5849b030-626e-47cb-ad90-3ce782d831b3'] > spm_id = 1 > type = ISCSI > class = Data > master_ver = 1 > name = StoragePoolEva01 > > Thanx for the help! > > > 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com>> > > can you please run: > > vdsClient -s 0 getStorageDomainInfo > f8ddd1d1-5266-493b-879b-f79c128751e2 > > > > On 01/20/2014 10:33 AM, Koen Vanoppen wrote: > > [root@soyuz ~]# vdsClient -s 0 getStorageDomainsList > f3fd055b-2764-44ed-9d77-81bd58984842 > 94de241c-bf5c-4630-9af3-7e31b902ae77 > f8ddd1d1-5266-493b-879b-f79c128751e2 > 50cf24a4-d1ef-4105-a9a5-b81d91339175 > 83b1867f-4aea-400e-9ce0-efbd5add4216 > > (soyuz=vdsmhost3) > > > 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com> > <mailto:dron@redhat.com <mailto:dron@redhat.com>>> > > > let's try to sift through :) > > can you run vdsClient -s 0 getStorageDomainsList? > > > > > > On 01/20/2014 09:52 AM, Meital Bourvine wrote: > > It seems that your setup is completely messed up. I > see the > following 3 errors all the time (I couldn't actually > find the > live storage migration error, since there are too many > errors): > > Thread-118::ERROR::2014-01-20 > 07:59:17,066::sampling::355::vm.Vm::(collect) > vmId=`f8c6190c-b722-4fcd-af17-21572151fcef`::Stats > function > failed: <AdvancedStatsFunction _highWrite at 0x27b41b8> > Traceback (most recent call last): > File "/usr/share/vdsm/sampling.py", line 351, in collect > statsFunction() > File "/usr/share/vdsm/sampling.py", line 226, in > __call__ > retValue = self._function(*args, **kwargs) > File "/usr/share/vdsm/vm.py", line 509, in _highWrite > if not vmDrive.blockDev or vmDrive.format != 'cow': > AttributeError: 'Drive' object has no attribute 'format' > > PolicyEngine::DEBUG::2014-01-20 > > 07:59:17,198::libvirtconnection::108::libvirtconnection::(wrapper) > Unknown libvirterror: ecode: 8 edom: 10 level: 2 message: > invalid argument: cannot set memory higher than max memory > PolicyEngine::ERROR::2014-01-20 > 07:59:17,199::vm::4359::vm.Vm::(reportError) > vmId=`ce626f90-41c4-4417-9e53-bf4066ad062d`::Set new > balloon > target failed > Traceback (most recent call last): > File "/usr/share/vdsm/vm.py", line 4371, in > setBalloonTarget > self._dom.setMemory(target) > File "/usr/share/vdsm/vm.py", line 835, in f > ret = attr(*args, **kwargs) > File > > "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line > 76, in wrapper > ret = f(*args, **kwargs) > File > "/usr/lib64/python2.6/site-packages/libvirt.py", line > 1410, in setMemory > if ret == -1: raise libvirtError > ('virDomainSetMemory() > failed', dom=self) > libvirtError: invalid argument: cannot set memory > higher than > max memory > > Thread-51::ERROR::2014-01-20 > 07:59:22,109::sampling::355::vm.Vm::(collect) > vmId=`493128c0-aba9-4b38-bf18-2778b910917f`::Stats > function > failed: <AdvancedStatsFunction _highWrite at 0x27b41b8> > Traceback (most recent call last): > File "/usr/share/vdsm/sampling.py", line 351, in collect > statsFunction() > File "/usr/share/vdsm/sampling.py", line 226, in > __call__ > retValue = self._function(*args, **kwargs) > File "/usr/share/vdsm/vm.py", line 513, in _highWrite > self._vm._dom.blockInfo(vmDrive.path, 0) > File "/usr/share/vdsm/vm.py", line 835, in f > ret = attr(*args, **kwargs) > File > > "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line > 76, in wrapper > ret = f(*args, **kwargs) > File > "/usr/lib64/python2.6/site-packages/libvirt.py", line > 1797, in blockInfo > if ret is None: raise libvirtError > ('virDomainGetBlockInfo() failed', dom=self) > libvirtError: invalid argument: invalid path > > /rhev/data-center/mnt/blockSD/f8ddd1d1-5266-493b-879b-f79c128751e2/images/b8da8541-9a0d-4c18-8aa8-50fc6225f18a/ff674bce-aa94-4b46-9f9d-d4182eab1e49 > not assigned to domain > > > > ------------------------------------------------------------------------ > > > > *From: *"Koen Vanoppen" <vanoppen.koen(a)gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>> > *To: *users(a)ovirt.org <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>>, "Meital > > Bourvine" <mbourvin(a)redhat.com > <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>> > *Sent: *Monday, January 20, 2014 9:39:10 AM > *Subject: *Re: [Users] Disk error > > > vdsm-4.13.0-11.el6.x86_64 > :-) > > > > 2014/1/20 Meital Bourvine <mbourvin(a)redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>>> > > > > First of all, I opened a bug about 'Drive' > object has no > attribute 'format': > https://bugzilla.redhat.com/show_bug.cgi?id=1055437 > > Please send me the output of `rpm -q vdsm` so I'll > update the > version in the bug. > > Also, it's better to send the logs to the list > (and > not only > to me), so more people will be able to help > you debug it. > > ----- Original Message ----- > > From: "Dafna Ron" <dron(a)redhat.com > <mailto:dron@redhat.com> > <mailto:dron@redhat.com <mailto:dron@redhat.com>> > <mailto:dron@redhat.com <mailto:dron@redhat.com> > <mailto:dron@redhat.com <mailto:dron@redhat.com>>>> > > To: "Meital Bourvine" <mbourvin(a)redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>> > <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com> <mailto:mbourvin@redhat.com > <mailto:mbourvin@redhat.com>>>> > > Cc: "Koen Vanoppen" <vanoppen.koen(a)gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>>>, users(a)ovirt.org > <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>> > <mailto:users@ovirt.org > <mailto:users@ovirt.org> <mailto:users@ovirt.org > <mailto:users@ovirt.org>>> > > > Sent: Monday, January 20, 2014 8:49:32 AM > > Subject: Re: [Users] Disk error > > > > from the errors you are getting, disk status > in db > is locked. > > > > > > On 01/20/2014 08:38 AM, Meital Bourvine wrote: > > > Hi Koen, > > > > > > What is the error that you got when live > storage > migration > failed? > > > Can you please attach vdsm.log and engine.log > > > > > > *From: *"Koen Vanoppen" > <vanoppen.koen(a)gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com <mailto:vanoppen.koen@gmail.com>> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com> > > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>>> > > > *To: *users(a)ovirt.org > <mailto:users@ovirt.org> <mailto:users@ovirt.org > <mailto:users@ovirt.org>> > <mailto:users@ovirt.org <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>>> > > > > > *Sent: *Monday, January 20, 2014 > 5:30:51 AM > > > *Subject: *[Users] Disk error > > > > > > Hi all! > > > > > > I got a kind of a strange error in ovirt. > THere was a > problem with > > > a vm that was complaining about low disk > space. (in > terms of > > > storage space of the storage center). > So I did > a live > migration of > > > the vm's disk. This failed, so I did a > shutdown of the > vm, to see > > > if that would help, but now I can't > get the VM > back up > again. > > > Neither can I remove the disk or > deactivate > the dis. > This is the > > > error: > > > Keep in mind that the vm is down and > he had 2 > disks... > > > > > > While trying to deactivate the disk: > > > > > > Error while executing action: > > > > > > KV-virt-v2v: > > > > > > * Cannot hot unplug Virtual Machine > Disk. Disk > KV-virt-v2v_Disk2 > > > is being moved or copied. > > > > > > > > > When I try to simply remove the vm: > > > > > > Error while executing action: > > > > > > KV-virt-v2v: > > > > > > * Cannot remove VM. Disk > KV-virt-v2v_Disk2 > is being > moved or copied. > > > * Cannot remove VM. Disk > LargeTemplate_Disk1 is > being moved or > > > copied. > > > > > > > > > Kind regards, > > > > > > Koen > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > > Dafna Ron > > > > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> > http://lists.ovirt.org/mailman/listinfo/users > > > > -- Dafna Ron > > > us > > -- > Dafna Ron > > -- Dafna Ron

1 0

[Users] Gluster command [Non interactive user] failed on server ..
by Andrew Lau 20 Jan '14

20 Jan '14

Hi, I'm seeing this weird error on my host which runs the hosted-engine, it only recently showed up and put the host into 'Non Operational' : Gluster command [Non interactive user] failed on server HV01. ovirt-engine.log http://www.fpaste.org/69949/90213863/ Current running VMs continue to run. Has anyone seen this before? Thanks, Andrew

2 2

Re: [Users] Disk error
by Dafna Ron 20 Jan '14

20 Jan '14

can you please run: vdsClient -s 0 getStorageDomainInfo f8ddd1d1-5266-493b-879b-f79c128751e2 On 01/20/2014 10:33 AM, Koen Vanoppen wrote: > [root@soyuz ~]# vdsClient -s 0 getStorageDomainsList > f3fd055b-2764-44ed-9d77-81bd58984842 > 94de241c-bf5c-4630-9af3-7e31b902ae77 > f8ddd1d1-5266-493b-879b-f79c128751e2 > 50cf24a4-d1ef-4105-a9a5-b81d91339175 > 83b1867f-4aea-400e-9ce0-efbd5add4216 > > (soyuz=vdsmhost3) > > > 2014/1/20 Dafna Ron <dron(a)redhat.com <mailto:dron@redhat.com>> > > let's try to sift through :) > > can you run vdsClient -s 0 getStorageDomainsList? > > > > > > On 01/20/2014 09:52 AM, Meital Bourvine wrote: > > It seems that your setup is completely messed up. I see the > following 3 errors all the time (I couldn't actually find the > live storage migration error, since there are too many errors): > > Thread-118::ERROR::2014-01-20 > 07:59:17,066::sampling::355::vm.Vm::(collect) > vmId=`f8c6190c-b722-4fcd-af17-21572151fcef`::Stats function > failed: <AdvancedStatsFunction _highWrite at 0x27b41b8> > Traceback (most recent call last): > File "/usr/share/vdsm/sampling.py", line 351, in collect > statsFunction() > File "/usr/share/vdsm/sampling.py", line 226, in __call__ > retValue = self._function(*args, **kwargs) > File "/usr/share/vdsm/vm.py", line 509, in _highWrite > if not vmDrive.blockDev or vmDrive.format != 'cow': > AttributeError: 'Drive' object has no attribute 'format' > > PolicyEngine::DEBUG::2014-01-20 > 07:59:17,198::libvirtconnection::108::libvirtconnection::(wrapper) > Unknown libvirterror: ecode: 8 edom: 10 level: 2 message: > invalid argument: cannot set memory higher than max memory > PolicyEngine::ERROR::2014-01-20 > 07:59:17,199::vm::4359::vm.Vm::(reportError) > vmId=`ce626f90-41c4-4417-9e53-bf4066ad062d`::Set new balloon > target failed > Traceback (most recent call last): > File "/usr/share/vdsm/vm.py", line 4371, in setBalloonTarget > self._dom.setMemory(target) > File "/usr/share/vdsm/vm.py", line 835, in f > ret = attr(*args, **kwargs) > File > "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line > 76, in wrapper > ret = f(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/libvirt.py", line > 1410, in setMemory > if ret == -1: raise libvirtError ('virDomainSetMemory() > failed', dom=self) > libvirtError: invalid argument: cannot set memory higher than > max memory > > Thread-51::ERROR::2014-01-20 > 07:59:22,109::sampling::355::vm.Vm::(collect) > vmId=`493128c0-aba9-4b38-bf18-2778b910917f`::Stats function > failed: <AdvancedStatsFunction _highWrite at 0x27b41b8> > Traceback (most recent call last): > File "/usr/share/vdsm/sampling.py", line 351, in collect > statsFunction() > File "/usr/share/vdsm/sampling.py", line 226, in __call__ > retValue = self._function(*args, **kwargs) > File "/usr/share/vdsm/vm.py", line 513, in _highWrite > self._vm._dom.blockInfo(vmDrive.path, 0) > File "/usr/share/vdsm/vm.py", line 835, in f > ret = attr(*args, **kwargs) > File > "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line > 76, in wrapper > ret = f(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/libvirt.py", line > 1797, in blockInfo > if ret is None: raise libvirtError > ('virDomainGetBlockInfo() failed', dom=self) > libvirtError: invalid argument: invalid path > /rhev/data-center/mnt/blockSD/f8ddd1d1-5266-493b-879b-f79c128751e2/images/b8da8541-9a0d-4c18-8aa8-50fc6225f18a/ff674bce-aa94-4b46-9f9d-d4182eab1e49 > not assigned to domain > > > ------------------------------------------------------------------------ > > > > *From: *"Koen Vanoppen" <vanoppen.koen(a)gmail.com > <mailto:vanoppen.koen@gmail.com>> > *To: *users(a)ovirt.org <mailto:users@ovirt.org>, "Meital > Bourvine" <mbourvin(a)redhat.com <mailto:mbourvin@redhat.com>> > *Sent: *Monday, January 20, 2014 9:39:10 AM > *Subject: *Re: [Users] Disk error > > > vdsm-4.13.0-11.el6.x86_64 > :-) > > > > 2014/1/20 Meital Bourvine <mbourvin(a)redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>>> > > > First of all, I opened a bug about 'Drive' object has no > attribute 'format': > https://bugzilla.redhat.com/show_bug.cgi?id=1055437 > > Please send me the output of `rpm -q vdsm` so I'll > update the > version in the bug. > > Also, it's better to send the logs to the list (and > not only > to me), so more people will be able to help you debug it. > > ----- Original Message ----- > > From: "Dafna Ron" <dron(a)redhat.com > <mailto:dron@redhat.com> <mailto:dron@redhat.com > <mailto:dron@redhat.com>>> > > To: "Meital Bourvine" <mbourvin(a)redhat.com > <mailto:mbourvin@redhat.com> > <mailto:mbourvin@redhat.com <mailto:mbourvin@redhat.com>>> > > Cc: "Koen Vanoppen" <vanoppen.koen(a)gmail.com > <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>>, users(a)ovirt.org > <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>> > > Sent: Monday, January 20, 2014 8:49:32 AM > > Subject: Re: [Users] Disk error > > > > from the errors you are getting, disk status in db > is locked. > > > > > > On 01/20/2014 08:38 AM, Meital Bourvine wrote: > > > Hi Koen, > > > > > > What is the error that you got when live storage > migration > failed? > > > Can you please attach vdsm.log and engine.log > > > > > > *From: *"Koen Vanoppen" > <vanoppen.koen(a)gmail.com <mailto:vanoppen.koen@gmail.com> > <mailto:vanoppen.koen@gmail.com > <mailto:vanoppen.koen@gmail.com>>> > > > *To: *users(a)ovirt.org <mailto:users@ovirt.org> > <mailto:users@ovirt.org <mailto:users@ovirt.org>> > > > > *Sent: *Monday, January 20, 2014 5:30:51 AM > > > *Subject: *[Users] Disk error > > > > > > Hi all! > > > > > > I got a kind of a strange error in ovirt. > THere was a > problem with > > > a vm that was complaining about low disk > space. (in > terms of > > > storage space of the storage center). So I did > a live > migration of > > > the vm's disk. This failed, so I did a > shutdown of the > vm, to see > > > if that would help, but now I can't get the VM > back up > again. > > > Neither can I remove the disk or deactivate > the dis. > This is the > > > error: > > > Keep in mind that the vm is down and he had 2 > disks... > > > > > > While trying to deactivate the disk: > > > > > > Error while executing action: > > > > > > KV-virt-v2v: > > > > > > * Cannot hot unplug Virtual Machine Disk. Disk > KV-virt-v2v_Disk2 > > > is being moved or copied. > > > > > > > > > When I try to simply remove the vm: > > > > > > Error while executing action: > > > > > > KV-virt-v2v: > > > > > > * Cannot remove VM. Disk KV-virt-v2v_Disk2 > is being > moved or copied. > > > * Cannot remove VM. Disk LargeTemplate_Disk1 is > being moved or > > > copied. > > > > > > > > > Kind regards, > > > > > > Koen > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org <mailto:Users@ovirt.org> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > > Dafna Ron > > > > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org <mailto:Users@ovirt.org> > http://lists.ovirt.org/mailman/listinfo/users > > > > -- > Dafna Ron > > us -- Dafna Ron

1 0

[Users] virt-v2v: invalid backend appliance
by Markus Stockhausen 20 Jan '14

20 Jan '14

------=_NextPartTM-000-e048b27c-2262-4ee1-9927-f5f1e482ee61 Content-Type: multipart/alternative; boundary="_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D51D1EXCHANGEcollogi_" --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D51D1EXCHANGEcollogi_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, just tried to run virt-v2v on Fedora 20. Disk conversion works flawlessly but in the end the process fails with: libguestfs: create: flags =3D 0, handle =3D 0x4fe26a0, program =3D perl invalid backend: appliance at /usr/share/perl5/vendor_perl/Sys/VirtConvert/= GuestfsHandle.pm line 83. libguestfs: closing guestfs handle 0x4fe26a0 (state 0) I'm using the same scripts & configuration files with Fedora 19. No problems there. Any ideas what is going wrong? Markus --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D51D1EXCHANGEcollogi_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html dir=3D"ltr"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <style id=3D"owaParaStyle" type=3D"text/css">P {margin-top:0;margin-bottom:= 0;}</style> </head> <body ocsi=3D"0" fpstyle=3D"1"> <div style=3D"direction: ltr;font-family: Tahoma;color: #000000;font-size: = 10pt;">Hello, just tried to run virt-v2v on Fedora 20. Disk conversion works flawlessly but in the end the process fails with: libguestfs: create: flags =3D 0, handle =3D 0x4fe26a0, program =3D perl invalid backend: appliance at /usr/share/perl5/vendor_perl/Sys/VirtConvert/= GuestfsHandle.pm line 83. libguestfs: closing guestfs handle 0x4fe26a0 (state 0) I'm using the same scripts & configuration files with Fedora 19. No problems there. Any ideas what is going wrong? Markus </div> </body> </html> --_000_12EF8D94C6F8734FB2FF37B9FBEDD173585D51D1EXCHANGEcollogi_-- ------=_NextPartTM-000-e048b27c-2262-4ee1-9927-f5f1e482ee61 Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-e048b27c-2262-4ee1-9927-f5f1e482ee61--

2 3

[Users] Disk error
by Koen Vanoppen 20 Jan '14

20 Jan '14

Hi all! I got a kind of a strange error in ovirt. THere was a problem with a vm that was complaining about low disk space. (in terms of storage space of the storage center). So I did a live migration of the vm's disk. This failed, so I did a shutdown of the vm, to see if that would help, but now I can't get the VM back up again. Neither can I remove the disk or deactivate the dis. This is the error: Keep in mind that the vm is down and he had 2 disks... While trying to deactivate the disk: Error while executing action: KV-virt-v2v: - Cannot hot unplug Virtual Machine Disk. Disk KV-virt-v2v_Disk2 is being moved or copied. When I try to simply remove the vm: Error while executing action: KV-virt-v2v: - Cannot remove VM. Disk KV-virt-v2v_Disk2 is being moved or copied. - Cannot remove VM. Disk LargeTemplate_Disk1 is being moved or copied. Kind regards, Koen

3 6

[Users] VM MAC-Ranges and setting custom MACs via API
by Sven Kieske 20 Jan '14

20 Jan '14

Hi, I got some questions regarding the MAC-Range in the engine and how to utilize the set custom mac feature via API: We want to set a custom MAC per VM via REST-API (JSON) The RSDL tells me, that this should be possible in general. However, I have two questions: Must the specified custom MAC be within the range defined in engine? I suppose not, as this range should just be a pool to take MACs from when engine itself acquires one for a vm. Also some users in IRC could use imported vms with custom macs, but using REST might yield different results? Does this work via JSON in ovirt-engine 3.3.2 ? I just learned that the JSON implementation is not feature complete until 3.4. so I wonder if I can use JSON instead of XML to achieve this. I can not wait for the 3.4. release anyway. We had so far no problem with using JSON beside a nasty Cloud-Init (documentation)bug (BZ 1045484) and we don't want to rewrite all our code to generate XML instead of JSON if we can avoid it. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

4 6

[Users] Windows guest
by Maurice James 20 Jan '14

20 Jan '14

------=_NextPart_000_0040_01CF129C.7A3E5FE0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Does anyone know if directdraw/directx works on windows guests in Ovirt? ------=_NextPart_000_0040_01CF129C.7A3E5FE0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1>Does anyone know if directdraw/directx works on = windows guests in Ovirt?<o:p></o:p></div></body></html> ------=_NextPart_000_0040_01CF129C.7A3E5FE0--

3 4

[Users] SPICE on OSX
by Karli Sjöberg 20 Jan '14

20 Jan '14

Hi Juan! I´ve read a post you made about packaging Remote-Viewer for OS X. I tested extracting and running this[1] package on a 10.7.5 machine, logging in to our webadmin portal with Firefox, clicking for console on a VM, remote-viewer starts up but doesn´t seems to load the console.vv file (the VM´s console never shows up). Is it something I´m missing? oVirt 3.3.1-2.el6 [1] http://people.freedesktop.org/~teuf/spice-gtk-osx/dmg/0.5.7/RemoteViewer-0.… -- Med Vänliga Hälsningar ------------------------------------------------------------------------------- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjoberg(a)slu.se

4 6