Hosted-Engine Resource Upgrade Method
by Steve Atkinson
I was wondering what the recommended method is for adding RAM/CPUs etc. to
the VM that runs the hosted-engine. If I attempt this from the manager, the
response is "Cannot Edit: This VM is not managed by the engine" and I don't
readily see a way to make changes to the VMs config from outside of the
engine. vdsClient does not show that VM as running either.
Thanks
-Steve A
10 years, 5 months
Node upgrade issue
by yao xu
Hi everyone !
I am looking something about ovirt node upgrade .
we are using a old version of ovirt node 3.1. Also I test ovirt node
3.5 . Somethings is puzzling me .
1, In ovirt node 3.1 , it seemed I can't upgrade ovirt node ,because of
Hostvg's existence.
In Hostvg , something like ssh keys are stored here, I know this is
important . Is it possible to let the node inherit these things ? so that
I can upgrade the node without remove things in hostvg .
2, I made a ovirt-node-iso 3.5 version myself . But when I try to
install it , it fails because the issue of selinux .
In shell mode , type "localectl" ,it shows this . after setenforce 0 ,
localectl will work well .
-
10 years, 5 months
Re: [ovirt-users] 答复: Engine is still unreachable
by Coffee Chou
Hi, Sandvik
I have read the engine.log, it shows:
Cannot find a valid baseurl for repo: base
can you show me your repo?
2014-11-21 12:21 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
> Hi,
>
> I'm sorry I forgot, here's the attachement.
>
> On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin <
> agustinsandvik(a)gmail.com> wrote:
>
>> Hi,
>>
>> I'm sorry I forgot, here's the attachement.
>>
>> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com>
>> wrote:
>>
>>> Hi, Sandvik
>>> maybe you forgot to attach your log~ that's
>>> ovirt-hosted-engine-setup, so you can also attach your setup log:-)
>>>
>>> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
>>>
>>>> Hi users,
>>>>
>>>> Chou, here's my I already tried your suggestion right now, but it still
>>>> failed, here's my engine.log and vdsm.log. and one more thing, since the
>>>> time that I started the installation of ovirt-hosted-engine setup, I
>>>> starting to have this kind of error message on my /var/log/message.
>>>>
>>>>
>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
>>>> multipath: error getting device
>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>>>> target to table
>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
>>>> multipath: error getting device
>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>>>> target to table
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>> can't remove
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>> can't remove
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>> can't remove
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>> can't remove
>>>>
>>>>
>>>> Thanks in advance
>>>> Sandvik
>>>>
>>>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Hi, Sandvik
>>>>> it's just a suggestion:-)
>>>>>
>>>>> i think you can have a try, as i don't know my solution worked or
>>>>> not. maybe there are some other people who have encountered this problem
>>>>> before and they can give you some advice:-)
>>>>>
>>>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
>>>>>
>>>>>> HI Chou,
>>>>>>
>>>>>>
>>>>>> Thanks, I will try your solution now, and should I resend this email
>>>>>> to users(a)ovirt.org?
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>> Sandvik
>>>>>>
>>>>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi, Sandvik
>>>>>>> and please don't send the email to me only but to user mail
>>>>>>> list, so everybody can help you :-)
>>>>>>>
>>>>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com>:
>>>>>>>
>>>>>>>> Hi, Sandvik
>>>>>>>> i can see the ERROR message: Command returned failure code 1
>>>>>>>> during SSH session .... you can try these:
>>>>>>>>
>>>>>>>> 1. stop firewall on the hosted_engine_1
>>>>>>>> 2. running command: vdsm-tool configure
>>>>>>>>
>>>>>>>> if it's still failure, please attach your engine.log and
>>>>>>>> vdsm.log
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com
>>>>>>>> >:
>>>>>>>>
>>>>>>>>> Hi Chou,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I have successfully install the hosted engine, but at the end of
>>>>>>>>> the installation I have this kind of error message
>>>>>>>>>
>>>>>>>>> To continue make a selection from the options below:
>>>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>>>> (2) Power off and restart the VM
>>>>>>>>> (3) Abort setup
>>>>>>>>>
>>>>>>>>> (1, 2, 3)[1]:
>>>>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status!
>>>>>>>>> Enter the name of the cluster to which you want to add
>>>>>>>>> the host (Default) [Default]:
>>>>>>>>> [ INFO ] Waiting for the host to become operational in the
>>>>>>>>> engine. This may take several minutes...
>>>>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>>>>>>>> engine and bootstrap installation logs.
>>>>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager
>>>>>>>>> Please shutdown the VM allowing the system to launch it
>>>>>>>>> as a monitored service.
>>>>>>>>> The system will wait until the VM is down.
>>>>>>>>> [ INFO ] Enabling and starting HA services
>>>>>>>>> Hosted Engine successfully set up
>>>>>>>>> [ INFO ] Stage: Clean up
>>>>>>>>> [ INFO ] Generating answer file
>>>>>>>>> '/etc/ovirt-hosted-engine/answers.conf'
>>>>>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has
>>>>>>>>> been updated
>>>>>>>>> [ INFO ] Stage: Pre-termination
>>>>>>>>> [ INFO ] Stage: Termination
>>>>>>>>>
>>>>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status
>>>>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error
>>>>>>>>> while executing action:
>>>>>>>>>
>>>>>>>>> hosted_engine_1:
>>>>>>>>>
>>>>>>>>> - Cannot activate Host. Host has no unique id.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> and when I try to reinstall it on the webadmin, nothing happen it
>>>>>>>>> still failed status.
>>>>>>>>>
>>>>>>>>> I hope you can help me.
>>>>>>>>>
>>>>>>>>> Please see attach for screenshot.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks in advance.
>>>>>>>>> sandvik
>>>>>>>>>
>>>>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <
>>>>>>>>> agustinsandvik(a)gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi guys,
>>>>>>>>>>
>>>>>>>>>> First of all I want to thank you for replying my email.
>>>>>>>>>> @Chou, yes I can access the engine webadmin.
>>>>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check my
>>>>>>>>>> /etc/hosts I have hostname conflict, then the ovirt engine is now
>>>>>>>>>> reachable, but there's another error message, it say's invalid certificate.
>>>>>>>>>> Is this because of I've put different FQDN during the installation process?
>>>>>>>>>>
>>>>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <
>>>>>>>>>> coffee.zyr(a)gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi, Chao
>>>>>>>>>>> You may make a mistake, that's not my setup :-)
>>>>>>>>>>> But i don't think it's a problem of password. If the
>>>>>>>>>>> passwords were not the same, it will throw an ERROR of:
>>>>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None:
>>>>>>>>>>> HTTP Status 401
>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the
>>>>>>>>>>> host to cluster None
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> so, i guess, maybe Sandvik's setup is still not accessable ?
>>>>>>>>>>>
>>>>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst(a)cn.fujitsu.com>:
>>>>>>>>>>>
>>>>>>>>>>> Hi, Chou
>>>>>>>>>>>>
>>>>>>>>>>>> It seems your rhevm is not setup successfully. I
>>>>>>>>>>>> suggest you can think about the two possible root cause below:
>>>>>>>>>>>>
>>>>>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is configured
>>>>>>>>>>>> correctly?
>>>>>>>>>>>>
>>>>>>>>>>>> 2. your password set in hosted-engine –deploy and
>>>>>>>>>>>> rhevm-setup is same ?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> If those are not your problem cause, Please provide more log
>>>>>>>>>>>> about it.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org]
>>>>>>>>>>>> *代表 *Coffee Chou
>>>>>>>>>>>> *发送时间:* 2014年11月19日 10:08
>>>>>>>>>>>> *收件人:* Sandvik Agustin
>>>>>>>>>>>> *抄送:* users(a)ovirt.org
>>>>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin <
>>>>>>>>>>>> agustinsandvik(a)gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi!,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this
>>>>>>>>>>>> documentation
>>>>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I have already completed the installation of ovirt engine
>>>>>>>>>>>> inside of the vm, when going back to hosted-engine --deploy
>>>>>>>>>>>> terminal and choosing 1 the hosted-engine --deploy says:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> (1, 2, 3)[1]: 1
>>>>>>>>>>>>
>>>>>>>>>>>> [ ERROR ] Engine is still unreachable
>>>>>>>>>>>>
>>>>>>>>>>>> Engine health status page is not yet reachable.
>>>>>>>>>>>>
>>>>>>>>>>>> To continue make a selection from the options below:
>>>>>>>>>>>>
>>>>>>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>>>>>>>
>>>>>>>>>>>> (2) Power off and restart the VM
>>>>>>>>>>>>
>>>>>>>>>>>> (3) Abort setup
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> what should I do? how to fix this?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks in advance,
>>>>>>>>>>>>
>>>>>>>>>>>> sandvik
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>> Users(a)ovirt.org
>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
10 years, 5 months
Re: [ovirt-users] Delivery Status Notification (Failure)
by Sandvik Agustin
>
> Hi,
>
> I'm sorry I forgot, here's the attachement.
>
> On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin <
> agustinsandvik(a)gmail.com>
> wrote:
>
> > Hi,
> >
> > I'm sorry I forgot, here's the attachement.
> >
> > On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com>
> > wrote:
> >
> >> Hi, Sandvik
> >> maybe you forgot to attach your log~ that's
> >> ovirt-hosted-engine-setup, so you can also attach your setup log:-)
> >>
> >> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
> >>
> >>> Hi users,
> >>>
> >>> Chou, here's my I already tried your suggestion right now, but it still
> >>> failed, here's my engine.log and vdsm.log. and one more thing, since
> the
> >>> time that I started the installation of ovirt-hosted-engine setup, I
> >>> starting to have this kind of error message on my /var/log/message.
> >>>
> >>>
> >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
> >>> multipath: error getting device
> >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
> >>> target to table
> >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
> >>> multipath: error getting device
> >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
> >>> target to table
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't
> >>> remove
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't
> >>> remove
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't
> >>> remove
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't
> >>> remove
> >>>
> >>>
> >>> Thanks in advance
> >>> Sandvik
> >>>
> >>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com>
> >>> wrote:
> >>>
> >>>> Hi, Sandvik
>
> ----- Message truncated -----
>
>
10 years, 5 months
Re: [ovirt-users] 答复: Engine is still unreachable
by Sandvik Agustin
Hi,
I'm sorry I forgot, here's the attachement.
On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com> wrote:
> Hi, Sandvik
> maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup,
> so you can also attach your setup log:-)
>
> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
>
>> Hi users,
>>
>> Chou, here's my I already tried your suggestion right now, but it still
>> failed, here's my engine.log and vdsm.log. and one more thing, since the
>> time that I started the installation of ovirt-hosted-engine setup, I
>> starting to have this kind of error message on my /var/log/message.
>>
>>
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
>> error getting device
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>> target to table
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
>> error getting device
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>> target to table
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>>
>>
>> Thanks in advance
>> Sandvik
>>
>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com>
>> wrote:
>>
>>> Hi, Sandvik
>>> it's just a suggestion:-)
>>>
>>> i think you can have a try, as i don't know my solution worked or
>>> not. maybe there are some other people who have encountered this problem
>>> before and they can give you some advice:-)
>>>
>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
>>>
>>>> HI Chou,
>>>>
>>>>
>>>> Thanks, I will try your solution now, and should I resend this email to
>>>> users(a)ovirt.org?
>>>>
>>>>
>>>> Thanks
>>>> Sandvik
>>>>
>>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Hi, Sandvik
>>>>> and please don't send the email to me only but to user mail list,
>>>>> so everybody can help you :-)
>>>>>
>>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com>:
>>>>>
>>>>>> Hi, Sandvik
>>>>>> i can see the ERROR message: Command returned failure code 1
>>>>>> during SSH session .... you can try these:
>>>>>>
>>>>>> 1. stop firewall on the hosted_engine_1
>>>>>> 2. running command: vdsm-tool configure
>>>>>>
>>>>>> if it's still failure, please attach your engine.log and vdsm.log
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
>>>>>>
>>>>>>> Hi Chou,
>>>>>>>
>>>>>>>
>>>>>>> I have successfully install the hosted engine, but at the end of the
>>>>>>> installation I have this kind of error message
>>>>>>>
>>>>>>> To continue make a selection from the options below:
>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>> (2) Power off and restart the VM
>>>>>>> (3) Abort setup
>>>>>>>
>>>>>>> (1, 2, 3)[1]:
>>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status!
>>>>>>> Enter the name of the cluster to which you want to add the
>>>>>>> host (Default) [Default]:
>>>>>>> [ INFO ] Waiting for the host to become operational in the engine.
>>>>>>> This may take several minutes...
>>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>>>>>> engine and bootstrap installation logs.
>>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager
>>>>>>> Please shutdown the VM allowing the system to launch it as
>>>>>>> a monitored service.
>>>>>>> The system will wait until the VM is down.
>>>>>>> [ INFO ] Enabling and starting HA services
>>>>>>> Hosted Engine successfully set up
>>>>>>> [ INFO ] Stage: Clean up
>>>>>>> [ INFO ] Generating answer file
>>>>>>> '/etc/ovirt-hosted-engine/answers.conf'
>>>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has
>>>>>>> been updated
>>>>>>> [ INFO ] Stage: Pre-termination
>>>>>>> [ INFO ] Stage: Termination
>>>>>>>
>>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status
>>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error
>>>>>>> while executing action:
>>>>>>>
>>>>>>> hosted_engine_1:
>>>>>>>
>>>>>>> - Cannot activate Host. Host has no unique id.
>>>>>>>
>>>>>>>
>>>>>>> and when I try to reinstall it on the webadmin, nothing happen it
>>>>>>> still failed status.
>>>>>>>
>>>>>>> I hope you can help me.
>>>>>>>
>>>>>>> Please see attach for screenshot.
>>>>>>>
>>>>>>>
>>>>>>> Thanks in advance.
>>>>>>> sandvik
>>>>>>>
>>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <
>>>>>>> agustinsandvik(a)gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi guys,
>>>>>>>>
>>>>>>>> First of all I want to thank you for replying my email.
>>>>>>>> @Chou, yes I can access the engine webadmin.
>>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check my
>>>>>>>> /etc/hosts I have hostname conflict, then the ovirt engine is now
>>>>>>>> reachable, but there's another error message, it say's invalid certificate.
>>>>>>>> Is this because of I've put different FQDN during the installation process?
>>>>>>>>
>>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <coffee.zyr(a)gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> Hi, Chao
>>>>>>>>> You may make a mistake, that's not my setup :-)
>>>>>>>>> But i don't think it's a problem of password. If the passwords
>>>>>>>>> were not the same, it will throw an ERROR of:
>>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: HTTP
>>>>>>>>> Status 401
>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the
>>>>>>>>> host to cluster None
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> so, i guess, maybe Sandvik's setup is still not accessable ?
>>>>>>>>>
>>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst(a)cn.fujitsu.com>:
>>>>>>>>>
>>>>>>>>> Hi, Chou
>>>>>>>>>>
>>>>>>>>>> It seems your rhevm is not setup successfully. I suggest
>>>>>>>>>> you can think about the two possible root cause below:
>>>>>>>>>>
>>>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is configured
>>>>>>>>>> correctly?
>>>>>>>>>>
>>>>>>>>>> 2. your password set in hosted-engine –deploy and
>>>>>>>>>> rhevm-setup is same ?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> If those are not your problem cause, Please provide more log
>>>>>>>>>> about it.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *代表
>>>>>>>>>> *Coffee Chou
>>>>>>>>>> *发送时间:* 2014年11月19日 10:08
>>>>>>>>>> *收件人:* Sandvik Agustin
>>>>>>>>>> *抄送:* users(a)ovirt.org
>>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin <
>>>>>>>>>> agustinsandvik(a)gmail.com>:
>>>>>>>>>>
>>>>>>>>>> Hi!,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this
>>>>>>>>>> documentation
>>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have already completed the installation of ovirt engine inside
>>>>>>>>>> of the vm, when going back to hosted-engine --deploy terminal
>>>>>>>>>> and choosing 1 the hosted-engine --deploy says:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> (1, 2, 3)[1]: 1
>>>>>>>>>>
>>>>>>>>>> [ ERROR ] Engine is still unreachable
>>>>>>>>>>
>>>>>>>>>> Engine health status page is not yet reachable.
>>>>>>>>>>
>>>>>>>>>> To continue make a selection from the options below:
>>>>>>>>>>
>>>>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>>>>>
>>>>>>>>>> (2) Power off and restart the VM
>>>>>>>>>>
>>>>>>>>>> (3) Abort setup
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> what should I do? how to fix this?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks in advance,
>>>>>>>>>>
>>>>>>>>>> sandvik
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Users mailing list
>>>>>>>>>> Users(a)ovirt.org
>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
10 years, 5 months
Re: [ovirt-users] 答复: Engine is still unreachable
by Sandvik Agustin
Hi users,
Chou, here's my I already tried your suggestion right now, but it still
failed, here's my engine.log and vdsm.log. and one more thing, since the
time that I started the installation of ovirt-hosted-engine setup, I
starting to have this kind of error message on my /var/log/message.
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
error getting device
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target
to table
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
error getting device
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target
to table
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove
Thanks in advance
Sandvik
On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com> wrote:
> Hi, Sandvik
> it's just a suggestion:-)
>
> i think you can have a try, as i don't know my solution worked or not.
> maybe there are some other people who have encountered this problem before
> and they can give you some advice:-)
>
> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
>
>> HI Chou,
>>
>>
>> Thanks, I will try your solution now, and should I resend this email to
>> users(a)ovirt.org?
>>
>>
>> Thanks
>> Sandvik
>>
>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com>
>> wrote:
>>
>>> Hi, Sandvik
>>> and please don't send the email to me only but to user mail list, so
>>> everybody can help you :-)
>>>
>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com>:
>>>
>>>> Hi, Sandvik
>>>> i can see the ERROR message: Command returned failure code 1 during
>>>> SSH session .... you can try these:
>>>>
>>>> 1. stop firewall on the hosted_engine_1
>>>> 2. running command: vdsm-tool configure
>>>>
>>>> if it's still failure, please attach your engine.log and vdsm.log
>>>>
>>>>
>>>>
>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>:
>>>>
>>>>> Hi Chou,
>>>>>
>>>>>
>>>>> I have successfully install the hosted engine, but at the end of the
>>>>> installation I have this kind of error message
>>>>>
>>>>> To continue make a selection from the options below:
>>>>> (1) Continue setup - engine installation is complete
>>>>> (2) Power off and restart the VM
>>>>> (3) Abort setup
>>>>>
>>>>> (1, 2, 3)[1]:
>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status!
>>>>> Enter the name of the cluster to which you want to add the
>>>>> host (Default) [Default]:
>>>>> [ INFO ] Waiting for the host to become operational in the engine.
>>>>> This may take several minutes...
>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>>>> engine and bootstrap installation logs.
>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager
>>>>> Please shutdown the VM allowing the system to launch it as a
>>>>> monitored service.
>>>>> The system will wait until the VM is down.
>>>>> [ INFO ] Enabling and starting HA services
>>>>> Hosted Engine successfully set up
>>>>> [ INFO ] Stage: Clean up
>>>>> [ INFO ] Generating answer file
>>>>> '/etc/ovirt-hosted-engine/answers.conf'
>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been
>>>>> updated
>>>>> [ INFO ] Stage: Pre-termination
>>>>> [ INFO ] Stage: Termination
>>>>>
>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status
>>>>> failed. I tried to activate it inside the webadmin, but it say's Error
>>>>> while executing action:
>>>>>
>>>>> hosted_engine_1:
>>>>>
>>>>> - Cannot activate Host. Host has no unique id.
>>>>>
>>>>>
>>>>> and when I try to reinstall it on the webadmin, nothing happen it
>>>>> still failed status.
>>>>>
>>>>> I hope you can help me.
>>>>>
>>>>> Please see attach for screenshot.
>>>>>
>>>>>
>>>>> Thanks in advance.
>>>>> sandvik
>>>>>
>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <
>>>>> agustinsandvik(a)gmail.com> wrote:
>>>>>
>>>>>> Hi guys,
>>>>>>
>>>>>> First of all I want to thank you for replying my email.
>>>>>> @Chou, yes I can access the engine webadmin.
>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check my
>>>>>> /etc/hosts I have hostname conflict, then the ovirt engine is now
>>>>>> reachable, but there's another error message, it say's invalid certificate.
>>>>>> Is this because of I've put different FQDN during the installation process?
>>>>>>
>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <coffee.zyr(a)gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi, Chao
>>>>>>> You may make a mistake, that's not my setup :-)
>>>>>>> But i don't think it's a problem of password. If the passwords
>>>>>>> were not the same, it will throw an ERROR of:
>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: HTTP
>>>>>>> Status 401
>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the host
>>>>>>> to cluster None
>>>>>>>
>>>>>>>
>>>>>>> so, i guess, maybe Sandvik's setup is still not accessable ?
>>>>>>>
>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst(a)cn.fujitsu.com>:
>>>>>>>
>>>>>>> Hi, Chou
>>>>>>>>
>>>>>>>> It seems your rhevm is not setup successfully. I suggest
>>>>>>>> you can think about the two possible root cause below:
>>>>>>>>
>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is configured
>>>>>>>> correctly?
>>>>>>>>
>>>>>>>> 2. your password set in hosted-engine –deploy and
>>>>>>>> rhevm-setup is same ?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> If those are not your problem cause, Please provide more log about
>>>>>>>> it.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *代表
>>>>>>>> *Coffee Chou
>>>>>>>> *发送时间:* 2014年11月19日 10:08
>>>>>>>> *收件人:* Sandvik Agustin
>>>>>>>> *抄送:* users(a)ovirt.org
>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi, can you access Engine webadmin with this ERROR message?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin <
>>>>>>>> agustinsandvik(a)gmail.com>:
>>>>>>>>
>>>>>>>> Hi!,
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this documentation
>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> I have already completed the installation of ovirt engine inside of
>>>>>>>> the vm, when going back to hosted-engine --deploy terminal and
>>>>>>>> choosing 1 the hosted-engine --deploy says:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> (1, 2, 3)[1]: 1
>>>>>>>>
>>>>>>>> [ ERROR ] Engine is still unreachable
>>>>>>>>
>>>>>>>> Engine health status page is not yet reachable.
>>>>>>>>
>>>>>>>> To continue make a selection from the options below:
>>>>>>>>
>>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>>>
>>>>>>>> (2) Power off and restart the VM
>>>>>>>>
>>>>>>>> (3) Abort setup
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> what should I do? how to fix this?
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks in advance,
>>>>>>>>
>>>>>>>> sandvik
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users(a)ovirt.org
>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
10 years, 5 months
Simple way to activate live merge in FC20 cluster
by Markus Stockhausen
This is a multi-part message in MIME format.
------=_NextPartTM-000-32fe2721-2bd7-4bec-82af-199583881fe2
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi Bob,=0A=
=0A=
if your are on a cluster with FC20 hypervisor nodes wthout virt-preview =0A=
(like we run it with qemu 1.6.2) the simplest way to get live merge feature=
s =0A=
should be - beware NOT FULLY TESTED!=0A=
=0A=
1) choose a single host (we only need a single one if we think about the re=
quired setup)=0A=
2) Install libvirt from virt-preview repos. DON'T UPDATE QEMU AS YOU BREAK =
LIVE MIGRATION!=0A=
3) migrate VMs you want to live merge to the host=0A=
4) do the live merge=0A=
5) migrate VMs back to original host=0A=
=0A=
A quick test revealed:=0A=
=0A=
# systemctl stop vdsmd=0A=
# systemctl stop libvirtd=0A=
# cd /etc/yum.repos.d=0A=
# wget http:/wget http://fedorapeople.org/groups/virt/virt-preview/fedora-v=
irt-preview.repo=0A=
# yum update libvirt=0A=
...=0A=
# systemctl start libvirtd=0A=
# systemctl start vdsmd=0A=
# =0A=
# vdsClient -s 0 getVdsCaps | grep -i merge=0A=
---> liveMerge =3D 'true'=0A=
=0A=
Best regards.=0A=
=0A=
Markus=0A=
________________________________________=0A=
Von: Bob Doolittle [bob(a)doolittle.us.com]=0A=
Gesendet: Donnerstag, 20. November 2014 16:49=0A=
An: Markus Stockhausen=0A=
Cc: s k; users(a)ovirt.org; Daniel Helgenberger; Coffee Chou=0A=
Betreff: Re: [ovirt-users] Live Merge Functionality disabled on CentOS 6.6 =
Node and oVirt 3.5.0=0A=
=0A=
On 11/20/2014 10:32 AM, Markus Stockhausen wrote:=0A=
> Iirc you simply need libvirt 1.2.9=0A=
=0A=
Thanks!=0A=
=0A=
Would you know how one could track to see if there is a plan for e,g.=0A=
Fedora 20 to include that version at some point? I suspect every distro=0A=
is different. F20 at this point includes 1.1.3. I'd like to know if I'll=0A=
have to upgrade to Fedora 21 in order to get this functionality, as this=0A=
will require some planning on my part.=0A=
=0A=
Thanks again,=0A=
Bob=0A=
=0A=
=0A=
>=0A=
> Am 20.11.2014 16:20 schrieb Bob Doolittle <bob(a)doolittle.us.com>:=0A=
>=0A=
> Are there any bugs related to the changes in question that we can tra=
ck=0A=
> so we know when the changes are reflected in our distros of interest?=
=0A=
>=0A=
> Thanks,=0A=
> Bob=0A=
>=0A=
> On 11/20/2014 03:51 AM, s k wrote:=0A=
> > Hi,=0A=
> >=0A=
> >=0A=
> > Live snapshot indeed works, only live merge is not working. I guess=
we=0A=
> > will have to wait until is available on CentOS.=0A=
> >=0A=
> > Thanks!=0A=
> >=0A=
> > Sokratis=0A=
> >=0A=
> >=0A=
> >=0A=
> ---------------------------------------------------------------------=
---=0A=
> > Date: Thu, 20 Nov 2014 09:49:40 +0800=0A=
> > Subject: Re: [ovirt-users] Live Merge Functionality disabled on Cen=
tOS=0A=
> > 6.6 Node and oVirt 3.5.0=0A=
> > From: coffee.zyr(a)gmail.com=0A=
> > To: daniel.helgenberger(a)m-box.de=0A=
> > CC: sokratis123k(a)outlook.com; users(a)ovirt.org=0A=
> >=0A=
> > Hi,=0A=
> > as i know, live merge is only available from the versions in th=
e=0A=
> > fedora virt-preview repo. please see[1]=0A=
> >=0A=
> > [1] http://www.ovirt.org/Features/Live_Merge#Current_status=0A=
> >=0A=
> > 2014-11-20 2:11 GMT+08:00 Daniel Helgenberger=0A=
> > <daniel.helgenberger(a)m-box.de <mailto:daniel.helgenberger@m-box.de>=
>:=0A=
> >=0A=
> > On 19.11.2014 14:06, s k wrote:=0A=
> > > Hello,=0A=
> > >=0A=
> > > I performed a full yum upgrade on a CentOS 6.5 Node which was=
=0A=
> > upgraded to 6.6=0A=
> > > and I currently the following RPM versions are installed:=0A=
> > >=0A=
> > > [root@node01 ~]# uname -a=0A=
> > > Linux node01 2.6.32-504.1.3.el6.x86_64 #1 SMP Tue Nov 11=0A=
> 17:57:25=0A=
> > UTC 2014=0A=
> > > x86_64 x86_64 x86_64 GNU/Linux=0A=
> > > [root@node01 ~]# rpm -qa |grep libvirt=0A=
> > > libvirt-python-0.10.2-46.el6_6.1.x86_64=0A=
> > > libvirt-client-0.10.2-46.el6_6.1.x86_64=0A=
> > > libvirt-lock-sanlock-0.10.2-46.el6_6.1.x86_64=0A=
> > > libvirt-0.10.2-46.el6_6.1.x86_64=0A=
> > > [root@node01 ~]#=0A=
> > > [root@node01 ~]# rpm -qa |grep kvm=0A=
> > > qemu-kvm-rhev-debuginfo-0.12.1.2-2.415.el6_5.14.x86_64=0A=
> > > qemu-kvm-rhev-tools-0.12.1.2-2.415.el6_5.14.x86_64=0A=
> > > qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64=0A=
> > > [root@node01 ~]# rpm -qa |grep qemu=0A=
> > > gpxe-roms-qemu-0.9.7-6.12.el6.noarch=0A=
> > > qemu-kvm-rhev-debuginfo-0.12.1.2-2.415.el6_5.14.x86_64=0A=
> > > qemu-img-rhev-0.12.1.2-2.415.el6_5.14.x86_64=0A=
> > > qemu-kvm-rhev-tools-0.12.1.2-2.415.el6_5.14.x86_64=0A=
> > > qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64=0A=
> > > [root@node01 ~]# rpm -qa |grep vdsm=0A=
> > > vdsm-jsonrpc-4.16.7-1.gitdb83943.el6.noarch=0A=
> > > vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el6.noarch=0A=
> > > vdsm-yajsonrpc-4.16.7-1.gitdb83943.el6.noarch=0A=
> > > vdsm-xmlrpc-4.16.7-1.gitdb83943.el6.noarch=0A=
> > > vdsm-4.16.7-1.gitdb83943.el6.x86_64=0A=
> > > vdsm-python-4.16.7-1.gitdb83943.el6.noarch=0A=
> > > vdsm-cli-4.16.7-1.gitdb83943.el6.noarch=0A=
> > >=0A=
> > > The host reports that Live Snapsnot Support is Active on the=
=0A=
> > General Tab but=0A=
> > > I'm unable to delete a snapshot.=0A=
> > >=0A=
> > > Any ideas?=0A=
> > Hm could it be you mix up live snapshot and live merge? Live=0A=
> snapshot=0A=
> > works since 3.4.3 quite will. Live merge however is still=0A=
> unsupported as=0A=
> > I think it requires some quite new stuff from libvirt. It will=
=0A=
> > eventually work on EL7 [1].=0A=
> >=0A=
> > [1] https://bugzilla.redhat.com/show_bug.cgi?id=3D1062142=0A=
> > >=0A=
> > > Thank you,=0A=
> > >=0A=
> > > Sokratis=0A=
> > >=0A=
> >=0A=
> > --=0A=
> > Daniel Helgenberger=0A=
> > m box bewegtbild GmbH=0A=
> >=0A=
> > P: +49/30/2408781-22=0A=
> > F: +49/30/2408781-10=0A=
> >=0A=
> > ACKERSTR. 19=0A=
> > D-10115 BERLIN=0A=
> >=0A=
> >=0A=
> > www.m-box.de <http://www.m-box.de> <http://www.m-box.de>=0A=
> www.monkeymen.tv <http://www.monkeymen.tv>=0A=
> > <http://www.monkeymen.tv>=0A=
> >=0A=
> > Gesch=E4ftsf=FChrer: Martin Retschitzegger / Michaela G=F6llner=
=0A=
> > Handeslregister: Amtsgericht Charlottenburg / HRB 112767=0A=
> > _______________________________________________=0A=
> > Users mailing list=0A=
> > Users(a)ovirt.org <mailto:Users@ovirt.org>=0A=
> > http://lists.ovirt.org/mailman/listinfo/users=0A=
> >=0A=
> >=0A=
> >=0A=
> >=0A=
> > _______________________________________________=0A=
> > Users mailing list=0A=
> > Users(a)ovirt.org=0A=
> > http://lists.ovirt.org/mailman/listinfo/users=0A=
> >=0A=
> _______________________________________________=0A=
> Users mailing list=0A=
> Users(a)ovirt.org=0A=
> http://lists.ovirt.org/mailman/listinfo/users=0A=
>=0A=
------=_NextPartTM-000-32fe2721-2bd7-4bec-82af-199583881fe2
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"
****************************************************************************
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
Weitergabe dieser Mail ist nicht gestattet.
Über das Internet versandte E-Mails können unter fremden Namen erstellt oder
manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine
rechtsverbindliche Willenserklärung.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
Vorstand:
Kadir Akin
Dr. Michael Höhnerbach
Vorsitzender des Aufsichtsrates:
Hans Kristian Langva
Registergericht: Amtsgericht Köln
Registernummer: HRB 52 497
This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
e-mails sent over the internet may have been written under a wrong name or
been manipulated. That is why this message sent as an e-mail is not a
legally binding declaration of intention.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
executive board:
Kadir Akin
Dr. Michael Höhnerbach
President of the supervisory board:
Hans Kristian Langva
Registry office: district court Cologne
Register number: HRB 52 497
****************************************************************************
------=_NextPartTM-000-32fe2721-2bd7-4bec-82af-199583881fe2--
10 years, 5 months
Re: [ovirt-users] ;vdsmdummy; provokes several errors
by Dan Kenigsberg
> Hi there,
Hi! Let me start by stating that the mailing list you've posted is
deprecated, and should have been closed. vdsm-users-related discussion
should take place on users(a)ovirt.org.
>
> the semicolons in the name of the vdsm-dummy interface provokes
> several errors on our RHEV-Hypervisors. We use Fat-Hypervisors which
> are fully puppetized. At the moment facter and rkhunter can't handle
> the semicolons.
> rkhunter:
> - ---------------------- Start Rootkit Hunter Scan ----------------------
> Invalid ALLOWDEVFILE configuration option: Invalid pathname:
> /dev/.udev/db/net:;vdsmdummy;
>
> - ----------------------- End Rootkit Hunter Scan -----------------------
>
> Facter: https://tickets.puppetlabs.com/browse/FACT-546
>
> Are those semicolon really necessary?
The motivation for the semicolons was to eliminate the (albeit remote)
chance of of this bridge name colliding with a previously-defined
network. It was introduced two years ago http://gerrit.ovirt.org/9562
and it is a bit two entrenched by now. Modifying it to another string,
while it is used by multiple VM in a distributed cluster of host is a
painful hassle.
It would be much more advisable for puppet to support all device names
acceptable by Linux (anything but ':. \t\0', without adding its own
limitations. I have a vague memory that Foreman encountered the same
problem, and fixed it.
Regards,
Dan.
10 years, 5 months
Migrate Ovirt to/from RHEV
by John Gardeniers
What is the procedure to use when migrating Ovirt to or from RHEV? I'm
assuming of course that there's little difference for the two
directions. Is it just a matter of detaching the storage domain(s),
dumping the engine database and attaching/importing them into the other
system?
regards,
John
10 years, 5 months
Migration Progress Bar not updating
by s k
--_cba2ab89-3e90-4e5d-8eed-68af9fda4a73_
Content-Type: text/plain; charset="iso-8859-7"
Content-Transfer-Encoding: quoted-printable
Hi=2C
On oVirt 3.5.0=2C while doing a VM migration the progress bar always stays =
at 0%. I tried it on different browsers (Chrome=2CIE=2CFirefox) and the beh=
avior is the same.
Any ideas about this?
Thanks=2C
Sokratis =
--_cba2ab89-3e90-4e5d-8eed-68af9fda4a73_
Content-Type: text/html; charset="iso-8859-7"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>Hi=2C<div><br></div><div>On oVir=
t 3.5.0=2C while doing a VM migration the progress bar always stays at 0%. =
I tried it on different browsers (Chrome=2CIE=2CFirefox) and the behavior i=
s the same.</div><div><br></div><div>Any ideas about this?</div><div><br></=
div><div>Thanks=2C</div><div><br></div><div>Sokratis</div> </div=
></body>
</html>=
--_cba2ab89-3e90-4e5d-8eed-68af9fda4a73_--
10 years, 5 months
Re: [ovirt-users] Fake power management?
by mots
------=_Part_39_1687046635.1416266377877
Content-Type: multipart/alternative;
boundary="=_t8EqHT3xdZg+XwUZZBd4cSFdl9lEQF49Im0BRY50j2FqCbqe"
This is a multi-part message in MIME format. Your mail reader does not
understand MIME message format.
--=_t8EqHT3xdZg+XwUZZBd4cSFdl9lEQF49Im0BRY50j2FqCbqe
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
-----Urspr=C3=BCngliche Nachricht-----=0D=0A=0D=0A> Von:Barak Azulay <baz=
ulay(a)redhat.com <mailto:bazulay@redhat.com> >=0D=0A> Gesendet: Mon 17 Nov=
ember 2014 23:30=0D=0A> An: Patrick Lottenbach <pl(a)a-bot.ch <mailto:pl@a-=
bot.ch> >=0D=0A> CC: users(a)ovirt.org <mailto:users@ovirt.org>=20=0D=0A> B=
etreff: Re: AW: [ovirt-users] Fake power management=3F=0D=0A>=20=0D=0A> W=
ell you can hack the solution in the form of replacing the fencing master=
script to always return success (Eli can help you with that),=0D=0A> and=
define an imaginary fencing device on each host ... meaning that the fen=
cing command will always succeeds.=0D=0A>=20=0D=0A=0D=0AThis sounds inter=
esting. It's exactly what I need.=0D=0A=0D=0A> But this may be risky ... =
as you might end up with the same VM running on 2 hosts.=20=0D=0A=0D=0AAs=
I see it, this would only happen if someone unplugs the network interfac=
e. I know this is a way to break the cluster. If someone unplugs the inte=
rface, then everything gets started twice anyways thanks to pacemaker bei=
ng configured to ignore the lack of quorum and it would look silly in fro=
nt of the customer.=0D=0A=0D=0A> And one last note ... when you disconnec=
t one of the hosts in the demo you mentioned, I think you'll be better to=
disconnect the host that does not run the engine ...=0D=0A=20=0D=0AIt ju=
st gets restarted on the remaining node and resumes operation. It even re=
members which guests ran on which host.=0D=0AThat part is really safe. Th=
e storage is configured to only report data as written when the write ope=
ration has finished on all (currently online) nodes, disk write caches ar=
e turned off in lvm.conf. PostreSQL is resilient enough to survive a cras=
h like this.=0D=0A=0D=0AOr am I missing something that might break=3F=0D=0A=
=0D=0A> Barak=20=0D=0A=0D=0Amots=0D=0A=0D=0A>=20=0D=0A> ----- Original Me=
ssage -----=0D=0A> > From: "mots" <mots(a)nepu.moe <mailto:mots@nepu.moe> >=
=0D=0A> > To: "Barak Azulay" <bazulay(a)redhat.com <mailto:bazulay@redhat.c=
om> >=0D=0A> > Cc: users(a)ovirt.org <mailto:users@ovirt.org>=20=0D=0A> > S=
ent: Monday, November 17, 2014 12:58:20 PM=0D=0A> > Subject: AW: [ovirt-u=
sers] Fake power management=3F=0D=0A> >=20=0D=0A> > Yes, pacemaker manage=
s the engine. That part is working fine, the engine=0D=0A> > restarts on =
the remaining node without problems.=0D=0A> > It's just that the guests d=
on't come back up until the powered down node has=0D=0A> > been fenced ma=
nually.=0D=0A> >=20=0D=0A> > -----Urspr=C3=BCngliche Nachricht-----=0D=0A=
> > > Von:Barak Azulay <bazulay(a)redhat.com <mailto:bazulay@redhat.com> <=
mailto:bazulay@redhat.com <mailto:bazulay@redhat.com> > >=0D=0A> > > Gese=
ndet: Mon 17 November 2014 11:35=0D=0A> > > An: Patrick Lottenbach <pl@a-=
bot.ch <mailto:pl@a-bot.ch> <mailto:pl@a-bot.ch <mailto:pl@a-bot.ch> > >=
=0D=0A> > > CC: users(a)ovirt.org <mailto:users@ovirt.org> <mailto:users@o=
virt.org <mailto:users@ovirt.org> >=0D=0A> > > Betreff: Re: [ovirt-users]=
Fake power management=3F=0D=0A> > >=20=0D=0A> > >=20=0D=0A> > >=20=0D=0A=
> > > ----- Original Message -----=0D=0A> > > > From: "mots" <mots(a)nepu.m=
oe <mailto:mots@nepu.moe> <mailto:mots@nepu.moe <mailto:mots@nepu.moe> >=
>=0D=0A> > > > To: users(a)ovirt.org <mailto:users@ovirt.org> <mailto:use=
rs(a)ovirt.org <mailto:users@ovirt.org> >=0D=0A> > > > Sent: Friday, Novemb=
er 14, 2014 4:54:08 PM=0D=0A> > > > Subject: [ovirt-users] Fake power man=
agement=3F=0D=0A> > > >=20=0D=0A> > > > Fake power management=3F Hello,=0D=
=0A> > > >=20=0D=0A> > > > I'm building a small demonstration system for =
our sales team to take to a=0D=0A> > > > customer so that they can show t=
hem our solutions.=0D=0A> > > > Hardware: Two Intel NUC's, a 4 port switc=
h and a laptop.=0D=0A> > > > Engine: Runs as a VM on one of the NUCs, whi=
ch one it runs on is=0D=0A> > > > determined=0D=0A> > > > by pacemaker.=0D=
=0A> > > > Storage: Also managed by pacemaker, it's drbd backed and acces=
sed with=0D=0A> > > > iscsi.=0D=0A> > > > oVirt version: 3.5=0D=0A> > > >=
OS: CentOS 6.6=0D=0A> > > >=20=0D=0A> > > > The idea is to have our sale=
s representative (or the potential customer=0D=0A> > > > himself) randoml=
y pull the plug on one of the NUCs to show that the=0D=0A> > > > system=0D=
=0A> > > > stays operational when part of the hardware fails.=0D=0A> > >=20=
=0D=0A> > > I assume you are aware that the engine might fence the node i=
t is running=0D=0A> > > on ...=0D=0A> > > Or do you use pacemaker to run =
the engine as well =3F=0D=0A> > >=20=0D=0A> > > > My problem is that I do=
n't have any way to implement power management, so=0D=0A> > > > the=0D=0A=
> > > > Engine can't fence nodes and won't restart guests that were runni=
ng on=0D=0A> > > > the=0D=0A> > > > node which lost power. In pacemaker I=
can just configure fencing over SSH=0D=0A> > > > or=0D=0A> > > > even di=
sable the requirement to do so completely. Is there something=0D=0A> > > =
> similar=0D=0A> > > > for oVirt, so that the Engine will consider a node=
which it can't connect=0D=0A> > > > to=0D=0A> > > > to be powered down=3F=
=0D=0A> > > >=20=0D=0A> > > > Regards,=0D=0A> > > >=20=0D=0A> > > > mots=0D=
=0A> > > >=20=0D=0A> > > > ______________________________________________=
_=0D=0A> > > > Users mailing list=0D=0A> > > > Users(a)ovirt.org <mailto:Us=
ers(a)ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >=0D=0A>=
> > > http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.=
org/mailman/listinfo/users>=20=0D=0A> > > > <" target=3D"_blank">http://l=
ists.ovirt.org/mailman/listinfo/users> <http://lists.ovirt.org/mailman/li=
stinfo/users> ;=0D=0A> > > >=20=0D=0A> > >=20=0D=0A> >=20=0D=0A> >=0D=0A>=
=20=0D=0A=0D=0A
--=_t8EqHT3xdZg+XwUZZBd4cSFdl9lEQF49Im0BRY50j2FqCbqe
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://ww=
w.w3.org/TR/html4/loose.dtd"><html>=0A<head>=0A <meta name=3D"Generator"=
content=3D"Zarafa WebApp v7.1.10-44973">=0A <meta http-equiv=3D"Content=
-Type" content=3D"text/html; charset=3Dutf-8">=0A <title>AW: [ovirt-user=
s] Fake power management=3F</title>=0A</head>=0A<body>=0A-----Urspr=C3=BC=
ngliche Nachricht-----<br><pre style=3D"white-space: -moz-pre-wrap; white=
-space: -pre-wrap; white-space: -o-pre-wrap; white-space: pre-wrap; word-=
wrap: break-word;" wrap=3D"">> Von:Barak Azulay <<a href=3D"mailto:=
bazulay(a)redhat.com">bazulay(a)redhat.com</a>><br>> Gesendet: Mon 17 N=
ovember 2014 23:30<br>> An: Patrick Lottenbach <<a href=3D"mailto:p=
l(a)a-bot.ch">pl(a)a-bot.ch</a>><br>> CC: <a href=3D"mailto:users@ovirt=
=2Eorg">users(a)ovirt.org</a><br>> Betreff: Re: AW: [ovirt-users] Fake p=
ower management=3F<br>> <br>> Well you can hack the solution in the=
form of replacing the fencing master script to always return success (El=
i can help you with that),<br>> and define an imaginary fencing device=
on each host ... meaning that the fencing command will always succeeds.<=
br>> <br><br>This sounds interesting. It's exactly what I need.<br><br=
>> But this may be risky ... as you might end up with the same VM runn=
ing on 2 hosts. <br><br>As I see it, this would only happen if someone un=
plugs the network interface. I know this is a way to break the cluster. I=
f someone unplugs the interface, then everything gets started twice anywa=
ys thanks to pacemaker being configured to ignore the lack of quorum and =
it would look silly in front of the customer.<br><br>> And one last no=
te ... when you disconnect one of the hosts in the demo you mentioned, I =
think you'll be better to disconnect the host that does not run the engin=
e ...<br> <br>It just gets restarted on the remaining node and resumes op=
eration. It even remembers which guests ran on which host.<br>That part i=
s really safe. The storage is configured to only report data as written w=
hen the write operation has finished on all (currently online) nodes, dis=
k write caches are turned off in lvm.conf. PostreSQL is resilient enough =
to survive a crash like this.<br><br>Or am I missing something that might=
break=3F<br><br>> Barak <br><br>mots<br><br>> <br>> ----- Origi=
nal Message -----<br>> > From: "mots" <<a href=3D"mailto:mots@ne=
pu.moe">mots(a)nepu.moe</a>><br>> > To: "Barak Azulay" <<a href=
=3D"mailto:bazulay@redhat.com">bazulay(a)redhat.com</a>><br>> > Cc=
: <a href=3D"mailto:users@ovirt.org">users(a)ovirt.org</a><br>> > Sen=
t: Monday, November 17, 2014 12:58:20 PM<br>> > Subject: AW: [ovirt=
-users] Fake power management=3F<br>> > <br>> > Yes, pacemake=
r manages the engine. That part is working fine, the engine<br>> > =
restarts on the remaining node without problems.<br>> > It's just t=
hat the guests don't come back up until the powered down node has<br>>=
> been fenced manually.<br>> > <br>> > -----Urspr=C3=BCng=
liche Nachricht-----<br>> > > Von:Barak Azulay <<a href=3D"ma=
ilto:bazulay@redhat.com">bazulay(a)redhat.com</a> <mailto:<a href=3D"mai=
lto:bazulay@redhat.com">bazulay(a)redhat.com</a>> ><br>> > >=
Gesendet: Mon 17 November 2014 11:35<br>> > > An: Patrick Lotte=
nbach <<a href=3D"mailto:pl@a-bot.ch">pl(a)a-bot.ch</a> <mailto:<a hr=
ef=3D"mailto:pl@a-bot.ch">pl(a)a-bot.ch</a>> ><br>> > > CC: =
<a href=3D"mailto:users@ovirt.org">users(a)ovirt.org</a> <mailto:<a href=
=3D"mailto:users@ovirt.org">users(a)ovirt.org</a>><br>> > > Bet=
reff: Re: [ovirt-users] Fake power management=3F<br>> > > <br>&g=
t; > > <br>> > > <br>> > > ----- Original Message=
-----<br>> > > > From: "mots" <<a href=3D"mailto:mots@nep=
u.moe">mots(a)nepu.moe</a> <mailto:<a href=3D"mailto:mots@nepu.moe">mots=
@nepu.moe</a>> ><br>> > > > To: <a href=3D"mailto:users=
@ovirt.org">users(a)ovirt.org</a> <mailto:<a href=3D"mailto:users@ovirt.=
org">users(a)ovirt.org</a>><br>> > > > Sent: Friday, Novembe=
r 14, 2014 4:54:08 PM<br>> > > > Subject: [ovirt-users] Fake =
power management=3F<br>> > > > <br>> > > > Fake p=
ower management=3F Hello,<br>> > > > <br>> > > > =
I'm building a small demonstration system for our sales team to take to a=
<br>> > > > customer so that they can show them our solutions=
=2E<br>> > > > Hardware: Two Intel NUC's, a 4 port switch and=
a laptop.<br>> > > > Engine: Runs as a VM on one of the NUCs=
, which one it runs on is<br>> > > > determined<br>> > =
> > by pacemaker.<br>> > > > Storage: Also managed by p=
acemaker, it's drbd backed and accessed with<br>> > > > iscsi=
=2E<br>> > > > oVirt version: 3.5<br>> > > > OS: =
CentOS 6.6<br>> > > > <br>> > > > The idea is to =
have our sales representative (or the potential customer<br>> > >=
; > himself) randomly pull the plug on one of the NUCs to show that th=
e<br>> > > > system<br>> > > > stays operational =
when part of the hardware fails.<br>> > > <br>> > > I a=
ssume you are aware that the engine might fence the node it is running<br=
>> > > on ...<br>> > > Or do you use pacemaker to run t=
he engine as well =3F<br>> > > <br>> > > > My proble=
m is that I don't have any way to implement power management, so<br>> =
> > > the<br>> > > > Engine can't fence nodes and wo=
n't restart guests that were running on<br>> > > > the<br>>=
; > > > node which lost power. In pacemaker I can just configure=
fencing over SSH<br>> > > > or<br>> > > > even d=
isable the requirement to do so completely. Is there something<br>> &g=
t; > > similar<br>> > > > for oVirt, so that the Engine=
will consider a node which it can't connect<br>> > > > to<br=
>> > > > to be powered down=3F<br>> > > > <br>>=
; > > > Regards,<br>> > > > <br>> > > > =
mots<br>> > > > <br>> > > > _____________________=
__________________________<br>> > > > Users mailing list<br>&=
gt; > > > <a href=3D"mailto:Users@ovirt.org">Users(a)ovirt.org</a>=
<mailto:<a href=3D"mailto:Users@ovirt.org">Users(a)ovirt.org</a>><br=
>> > > > <a href=3D"http://lists.ovirt.org/mailman/listinfo/u=
sers" target=3D"_blank">http://lists.ovirt.org/mailman/listinfo/users</a>=
<br>> > > > <<a href=3D"http://lists.ovirt.org/mailman/lis=
tinfo/users>" target=3D"_blank">http://lists.ovirt.org/mailman/listinfo/u=
sers></a>;<br>> > > > <br>> > > <br>> > <br=
>> ><br>> </pre>=0A</body>=0A</html>
--=_t8EqHT3xdZg+XwUZZBd4cSFdl9lEQF49Im0BRY50j2FqCbqe--
------=_Part_39_1687046635.1416266377877
Content-Type: application/pgp-signature; name=signature.asc
Content-Transfer-Encoding: 7bit
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----
Version: CIPHERMAIL (2.8.6-4)
iQEcBAEBCAAGBQJUaoKJAAoJELfzdzVzTtoKUzQH/3pNM2Xw4MjY7OkJRj2c7VbR
Lk454UhQ3kBTz/OiFLI5burVnapyzNcrIOAkwwWdseZkFulgqJhh+wiwS4EN/3aV
cc3FrESB5sbmObO87tqLiQMkVvc8nUASZhIOcQJEiUhRmDMTGerR58YHR3cKBTiN
hygbEkcmPw9pSYrJeQ/jXMlapju4Xet5FHbd4EYcgW8Gh7QmQszdMcNc9qwZ3dyM
rzsY8OpaHogzQv1DbnXJAjdGR8LMm/XDP2ZBazuafnjQZli3kEl2WwNFrda+kZhj
HTpdJFwt/yC05hkz3hXzkRwfqXDsYmCLsetn4Ym8w/pcA80iLiUp/oDqi7BheTE=
=V9lP
-----END PGP SIGNATURE-----
------=_Part_39_1687046635.1416266377877--
10 years, 5 months
Re: [ovirt-users] Live Merge Functionality disabled on CentOS 6.6 Node and oVirt 3.5.0
by Markus Stockhausen
------=_NextPartTM-000-c83c49cc-dedf-4344-afc7-1c0140733acf
Content-Type: multipart/alternative;
boundary="_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C0C6CEXCHANGEcollogi_"
--_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C0C6CEXCHANGEcollogi_
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64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--_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C0C6CEXCHANGEcollogi_
Content-Type: text/html; charset="utf-8"
Content-ID: <CE8A9AFF8C43E949889520DB6219D914(a)collogia.de>
Content-Transfer-Encoding: base64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--_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C0C6CEXCHANGEcollogi_--
------=_NextPartTM-000-c83c49cc-dedf-4344-afc7-1c0140733acf
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"
****************************************************************************
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
Weitergabe dieser Mail ist nicht gestattet.
Über das Internet versandte E-Mails können unter fremden Namen erstellt oder
manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine
rechtsverbindliche Willenserklärung.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
Vorstand:
Kadir Akin
Dr. Michael Höhnerbach
Vorsitzender des Aufsichtsrates:
Hans Kristian Langva
Registergericht: Amtsgericht Köln
Registernummer: HRB 52 497
This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
e-mails sent over the internet may have been written under a wrong name or
been manipulated. That is why this message sent as an e-mail is not a
legally binding declaration of intention.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
executive board:
Kadir Akin
Dr. Michael Höhnerbach
President of the supervisory board:
Hans Kristian Langva
Registry office: district court Cologne
Register number: HRB 52 497
****************************************************************************
------=_NextPartTM-000-c83c49cc-dedf-4344-afc7-1c0140733acf--
10 years, 5 months
Live Merge Functionality disabled on CentOS 6.6 Node and oVirt 3.5.0
by s k
--_d7ba62e5-cc0a-4b02-9e57-68cd7267ac34_
Content-Type: text/plain; charset="iso-8859-7"
Content-Transfer-Encoding: quoted-printable
Hello=2C
I performed a full yum upgrade on a CentOS 6.5 Node which was upgraded to 6=
.6 and I currently the following RPM versions are installed:
[root@node01 ~]# uname -aLinux node01 2.6.32-504.1.3.el6.x86_64 #1 SMP Tue =
Nov 11 17:57:25 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux[root@node01 ~]# rpm=
-qa |grep libvirtlibvirt-python-0.10.2-46.el6_6.1.x86_64libvirt-client-0.1=
0.2-46.el6_6.1.x86_64libvirt-lock-sanlock-0.10.2-46.el6_6.1.x86_64libvirt-0=
.10.2-46.el6_6.1.x86_64[root@node01 ~]# [root@node01 ~]# rpm -qa |grep kvmq=
emu-kvm-rhev-debuginfo-0.12.1.2-2.415.el6_5.14.x86_64qemu-kvm-rhev-tools-0.=
12.1.2-2.415.el6_5.14.x86_64qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64[ro=
ot@node01 ~]# rpm -qa |grep qemugpxe-roms-qemu-0.9.7-6.12.el6.noarchqemu-kv=
m-rhev-debuginfo-0.12.1.2-2.415.el6_5.14.x86_64qemu-img-rhev-0.12.1.2-2.415=
.el6_5.14.x86_64qemu-kvm-rhev-tools-0.12.1.2-2.415.el6_5.14.x86_64qemu-kvm-=
rhev-0.12.1.2-2.415.el6_5.14.x86_64[root@node01 ~]# rpm -qa |grep vdsmvdsm-=
jsonrpc-4.16.7-1.gitdb83943.el6.noarchvdsm-python-zombiereaper-4.16.7-1.git=
db83943.el6.noarchvdsm-yajsonrpc-4.16.7-1.gitdb83943.el6.noarchvdsm-xmlrpc-=
4.16.7-1.gitdb83943.el6.noarchvdsm-4.16.7-1.gitdb83943.el6.x86_64vdsm-pytho=
n-4.16.7-1.gitdb83943.el6.noarchvdsm-cli-4.16.7-1.gitdb83943.el6.noarch
The host reports that Live Snapsnot Support is Active on the General Tab b=
ut I'm unable to delete a snapshot.
Any ideas?
Thank you=2C
Sokratis =
--_d7ba62e5-cc0a-4b02-9e57-68cd7267ac34_
Content-Type: text/html; charset="iso-8859-7"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>Hello=2C<div><br></div><div>I pe=
rformed a full yum upgrade on a CentOS 6.5 Node which was upgraded to 6.6 a=
nd I currently the following RPM versions are installed:</div><div><br></di=
v><div><div>[root@node01 ~]# uname -a</div><div>Linux node01 2.6.32-504.1.3=
.el6.x86_64 #1 SMP Tue Nov 11 17:57:25 UTC 2014 x86_64 x86_64 x86_64 GNU/Li=
nux</div><div>[root@node01 ~]# rpm -qa |grep libvirt</div><div>libvirt-pyth=
on-0.10.2-46.el6_6.1.x86_64</div><div>libvirt-client-0.10.2-46.el6_6.1.x86_=
64</div><div>libvirt-lock-sanlock-0.10.2-46.el6_6.1.x86_64</div><div>libvir=
t-0.10.2-46.el6_6.1.x86_64</div><div>[root@node01 ~]# =3B</div><div>[ro=
ot@node01 ~]# rpm -qa |grep kvm</div><div>qemu-kvm-rhev-debuginfo-0.12.1.2-=
2.415.el6_5.14.x86_64</div><div>qemu-kvm-rhev-tools-0.12.1.2-2.415.el6_5.14=
.x86_64</div><div>qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64</div><div>[r=
oot@node01 ~]# rpm -qa |grep qemu</div><div>gpxe-roms-qemu-0.9.7-6.12.el6.n=
oarch</div><div>qemu-kvm-rhev-debuginfo-0.12.1.2-2.415.el6_5.14.x86_64</div=
><div>qemu-img-rhev-0.12.1.2-2.415.el6_5.14.x86_64</div><div>qemu-kvm-rhev-=
tools-0.12.1.2-2.415.el6_5.14.x86_64</div><div>qemu-kvm-rhev-0.12.1.2-2.415=
.el6_5.14.x86_64</div><div>[root@node01 ~]# rpm -qa |grep vdsm</div><div>vd=
sm-jsonrpc-4.16.7-1.gitdb83943.el6.noarch</div><div>vdsm-python-zombiereape=
r-4.16.7-1.gitdb83943.el6.noarch</div><div>vdsm-yajsonrpc-4.16.7-1.gitdb839=
43.el6.noarch</div><div>vdsm-xmlrpc-4.16.7-1.gitdb83943.el6.noarch</div><di=
v>vdsm-4.16.7-1.gitdb83943.el6.x86_64</div><div>vdsm-python-4.16.7-1.gitdb8=
3943.el6.noarch</div><div>vdsm-cli-4.16.7-1.gitdb83943.el6.noarch</div></di=
v><div><br></div><div>The host reports that  =3BLive Snapsnot Support i=
s Active on the General Tab but I'm unable to delete a snapshot.</div><div>=
<br></div><div>Any ideas?</div><div><br></div><div>Thank you=2C</div><div><=
br></div><div>Sokratis</div> </div></body>
</html>=
--_d7ba62e5-cc0a-4b02-9e57-68cd7267ac34_--
10 years, 5 months
Re: [ovirt-users] oVirt 3.5 & NAT
by Phil Daws
How does one add multiple custom properties ? tried:
engine-config -s CustomDeviceProperties='{type=interface;prop={vlan=^[a-zA-Z0-9_ ---]+$}}{type=interface;prop={bridge=^[a-zA-Z0-9_ ---]+$}}'
but ended up with one call vlan and the other prop :) If can add vlan and bridge then should be able to use a vNIC profile for adding an interface directly to OVS using a custom hook.
Thanks, Phil
----- Original Message -----
From: "Phil Daws" <uxbod(a)splatnix.net>
To: users(a)ovirt.org
Sent: Monday, 27 October, 2014 3:04:20 PM
Subject: Re: [ovirt-users] oVirt 3.5 & NAT
Well, in fact have got something to work now! Left ovirtmgmt and em1 alone but ran:
$ ovs-vsctl add-br ovsbr0
$ ip link add name veth0 type veth peer name veth1
$ brctl addif ovirtmgmt veth0
$ ovs-vsctl add-port ovsbr veth1
$ ip add add XXX.XXX.XXX.XXX/29 dev veth1
$ ip link set veth0 up && ip link set veth1 up
and now veth1 is responding as-well as veth0.
ovs-vsctl show
08554d11-3ba7-4303-b9d5-6a09f23c9057
Bridge "ovsbr0"
Port "veth1"
Interface "veth1"
Port "ovsbr0"
Interface "ovsbr0"
type: internal
so what I think should do now is create a custom parameter on the Engine Manager that allows one to define an OVS bridge name and VLAN so when a virtual guest is created it can be assigned to the new bridge; with the use of a custom hook.
Thanks, Phil
----- Original Message -----
From: "Phil Daws" <uxbod(a)splatnix.net>
To: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Monday, 27 October, 2014 2:10:34 PM
Subject: Re: [ovirt-users] oVirt 3.5 & NAT
Darn, looks like this will not work :( the problem is that oVirt creates the bridge ovirtmgmt and binds that to your interface eg. em1. So at that point you have network running. If you then try to add that to the OVS stack your networking stop :( I tried to add it as a port using ovs-vsctl add-port ovsbr0 ovirtmgmt which is accepted but then networking stops. As soon as I remove again networking comes back to life. There does not seem to be a way to have two co-existing bridges :( Thanks, Phil
----- Original Message -----
From: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
To: "Phil Daws" <uxbod(a)splatnix.net>
Cc: "Dan Kenigsberg" <danken(a)redhat.com>, users(a)ovirt.org
Sent: Monday, 27 October, 2014 12:13:30 PM
Subject: Re: [ovirt-users] oVirt 3.5 & NAT
----- Original Message -----
> From: "Phil Daws" <uxbod(a)splatnix.net>
> To: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
> Cc: "Dan Kenigsberg" <danken(a)redhat.com>, users(a)ovirt.org
> Sent: Monday, October 27, 2014 11:41:56 AM
> Subject: Re: [ovirt-users] oVirt 3.5 & NAT
>
> Hi Antoni:
>
> Yes, prior to the reboot it did work okay. This is how it should look I
> believe:
>
> Bridge "ovirtmgmt"
> Port "mgmt0"
> Interface "mgmt0"
> type: internal
> Port "ovsbr0"
> Interface "ovsbr0"
> type: internal
>
> So the bridge would be defined by oVirt then I guess with a custom hook that
> would then be added to the OVS stack ?
exactly! You could just make a hook script that runs an after_network_setup
hook that does the ovs-vsctl for you ;-)
Here you can see the presentation I gave last February at devconf about extending
with configurators and hooks.
http://blog.antoni.me/devconf14/#/8/1
I linked directly to a before_network_setup hook sample, because it works just like
the after_network_setup hook. Instead of logging to systemd, just add that if
'remove' is not in data and network == 'ovirtmgmt', it adds the network bridge to
the vswitch with python's subprocess.call or subprocess.check_output.
You can send it if you want me to take a look ;-)
PS: It is possible to write the hooks in bash, c, perl, etc. But we only have the
convenience read_json methods and such for python. If you wanted to, you could have
a simple bash hook that just checked if there was an ovirtmgmt bridge and it would
add it doing ovs-vsctl in the before_vdsm_start hooking point. That would have the
drawback that changing the ovirtmgmt bridge with oVirt UI would leave it disconnected
again.
>
> Thanks, Phil
>
> ----- Original Message -----
> From: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
> To: "Phil Daws" <uxbod(a)splatnix.net>
> Cc: "Dan Kenigsberg" <danken(a)redhat.com>, users(a)ovirt.org
> Sent: Monday, 27 October, 2014 9:56:38 AM
> Subject: Re: [ovirt-users] oVirt 3.5 & NAT
>
>
>
> ----- Original Message -----
> > From: "Phil Daws" <uxbod(a)splatnix.net>
> > To: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
> > Cc: "Dan Kenigsberg" <danken(a)redhat.com>, users(a)ovirt.org
> > Sent: Monday, October 27, 2014 10:37:18 AM
> > Subject: Re: [ovirt-users] oVirt 3.5 & NAT
> >
> > That is what I tried but oVirt appears to overwrite the bridge information
> > on
> > boot :( Thanks, Phil
>
> But before rebooting, does it work as you intended? If so, you could just
> make
> a vdsm hook that adds ovirtmgmt to the ovs bridge after it is set up. (I
> could
> give more directions into how to do it).
>
> >
> > ----- Original Message -----
> > From: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
> > To: "Phil Daws" <uxbod(a)splatnix.net>
> > Cc: "Dan Kenigsberg" <danken(a)redhat.com>, users(a)ovirt.org
> > Sent: Monday, 27 October, 2014 8:00:33 AM
> > Subject: Re: [ovirt-users] oVirt 3.5 & NAT
> >
> >
> >
> > ----- Original Message -----
> > > From: "Phil Daws" <uxbod(a)splatnix.net>
> > > To: "Dan Kenigsberg" <danken(a)redhat.com>
> > > Cc: users(a)ovirt.org
> > > Sent: Saturday, October 25, 2014 5:02:59 PM
> > > Subject: Re: [ovirt-users] oVirt 3.5 & NAT
> > >
> > > Hmmm, this is becoming difficult ..
> > >
> > > I have added into the engine the custom hook and understand how that will
> > > work. The issue is how can a single NIC use two different bridges ?
> > > Example with OVS would be that one requires:
> > >
> > > em1 -+ ovirtmgmt (bridge) -> management IP (public)
> > > + ovs (bridge) -> firewall IP (public)
> > > |
> > > + vlan 1
> > > + vlan 2
> > >
> > > this works fine when using OVS and KVM, without oVirt, so there must be a
> > > way
> > > to hook the two together without a Neutron appliance.
> > >
> > > Any thoughts ? Thanks, Phil.
> >
> > I haven't tried this, and it may not work, but what happens if you add the
> > ovirtmgmt
> > bridge as a port of the ovs bridge?
> > >
> > >
> > > ----- Original Message -----
> > > From: "Dan Kenigsberg" <danken(a)redhat.com>
> > > To: "Phil Daws" <uxbod(a)splatnix.net>
> > > Cc: users(a)ovirt.org
> > > Sent: Wednesday, 22 October, 2014 3:54:46 PM
> > > Subject: Re: [ovirt-users] oVirt 3.5 & NAT
> > >
> > > On Wed, Oct 22, 2014 at 03:12:09PM +0100, Phil Daws wrote:
> > > > Thanks Dan & Antoni:
> > > >
> > > > I wonder then if I could replace the standard libvirt defined network
> > > > with
> > > > an OpenVSwitch one like I have on my dev system? That is just straight
> > > > KVM with OVS integrated. Maybe a bit more overhead in administration
> > > > but
> > > > possibly less than having to spin up a Neutron Appliance.
> > >
> > > Once you start to use the vdsm-hook-extnet, all that you need to do is
> > > to replace the libvirt-side definition of the "external network". This
> > > may well be an OpenVSwitch-based network e.g.
> > > http://libvirt.org/formatnetwork.html#elementVlanTag
> > > _______________________________________________
> > > Users mailing list
> > > Users(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10 years, 5 months
Cumulative VM network usage
by Lior Vernia
Hello,
The need to monitor cumulative VM network usage has come up several
times in the past; while this should be handled as part of
(https://bugzilla.redhat.com/show_bug.cgi?id=1063343), in the mean time
I've written a small Python script that monitors those statistics,
attached here.
The script polls the engine via RESTful API periodically and dumps the
up-to-date total usage into a file. The output is a multi-level
map/dictionary in JSON format, where:
* The top level keys are VM names.
* Under each VM, the next level keys are vNIC names.
* Under each vNIC, there are keys for total 'rx' (received) and 'tx'
(transmitted), where the values are in Bytes.
The script is built to run forever. It may be stopped at any time, but
while it's not running VM network usage data will "be lost". When it's
re-run, it'll go back to accumulating data on top of its previous data.
A few disclaimers:
* I haven't tested this with any edge cases (engine service dies, etc.).
* Tested this with tens of VMs, not sure it'll work fine with hundreds.
* The PERIOD_TIME (polling interval) should be set so that it matches
both the engine's and vdsm's polling interval (see comments inside the
script), otherwise data will be either lost or counted multiple times.
>From 3.4 onwards, default configuration should be fine with 15 seconds.
* The precision of traffic measurement on a NIC is 0.1% of the
interface's speed over each PERIOD_TIME interval. For example, on a
1Gbps vNIC, when PERIOD_TIME = 15s, data will only be measured in 15Mb
(~2MB) quanta. Specifically what this means is, that in this example,
any traffic smaller than 2MB over a 15-second period would be negligible
and wouldn't be recorded.
Knock yourselves out :)
10 years, 5 months
Power Management - but no LO?
by Daniel Helgenberger
Hello,
I am toying an idea involving using oVirt's PM capabilities (esp. the
cluster power_saving policy) in conjuration with some consumer grate
hosts for raw compute applications.
Now, these hosts do not have any lights out or BMC capabilities.
However, they could be started with WOL packets.
Is there a way how this can be done in oVirt? Shutting down hosts with
ssh and starting them with WOL?
Thanks!
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen.tv
Geschäftsführer: Martin Retschitzegger / Michaela Göllner
Handeslregister: Amtsgericht Charlottenburg / HRB 112767
10 years, 5 months
Gluster command[<UNKNOWN>] failed on server ovhost1
by Fumihide Tani
Please help!
I'm hosting an oVirt3.5 Engine server (CentOS6.5) and oVirt3.5 Host servers (CentOS 7.0).
Today, I have stopped all oVirt services (ovirt-engine and vdsmd) and updated oVirt3.5 Engine server and ovirt3.5 Host server by "yum update".
While update, some new Gluster components were installed.
After update, I tried to reboot ovirt3.5 Engine and Node servers, but oVirt is not working.
Portal's Events shows that:
- Status of host ovhost1 was set to NonOperational.
- Gluster command[<UNKNOWN>] failed on server ovhost1.
My oVirt servers and VMs are not operational now.
How to resolve?
Many thanks,
Fumihide Tani
10 years, 5 months
LDAP
by Koen Vanoppen
Hello everybody,
We updated our ovirt to 3.5, but now we see some errors concerning LDAP. I
already searched oonline for a guide for the AAA config, but can't seem to
find something...
Does anybody already has a clear how-to for the AAA config?
This is the error we get sometimes in our engine.log (we are still able to
login with ldap btw):
2014-11-20 06:42:06,539 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.DirectorySearcher]
(ajp--127.0.0.1-8702-32) Failed ldap search server
ldap://***.brussels.airport:*** using user ****(a)BRUSSELS.AIRPORT due to :
[LDAP: error code 34 - 0000208F: LdapErr: DSID-0C09074B, comment: Error
processing name, data 0, v23f0]; nested exception is
javax.naming.InvalidNameException: : [LDAP: error code 34 - 0000208F:
LdapErr: DSID-0C09074B, comment: Error processing name, data 0, v23f0];
remaining name ''. We should try the next server
Kind regards,
Koen
10 years, 5 months
IPA-auth: user password expired
by Demeter Tibor
------=_Part_6727133_325728685.1416415592421
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Hi,
I have an IPA server 3.0 on centos 6.6.
I successfully attached to my ovirt cluster.
I can see the users on ovirt user tab, but after auth I always get this error:
Cannot Login. User Password has expired. Use the following URL to change the password: (nothing)
I have try out with different long passwords and different users, but it's same.
Is this version compatible with ovirt 3.5?
What did I wrong?
Thanks in advance,
Tibor
------=_Part_6727133_325728685.1416415592421
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: times new roman, new york, times, se=
rif; font-size: 12pt; color: #000000"><div>Hi,</div><div><br></div><div>I h=
ave an IPA server 3.0 on centos 6.6.</div><div>I successfully attached to m=
y ovirt cluster. </div><div>I can see the users on ovirt user tab, but=
after auth I always get this error:</div><div><span aria-hidden=3D"false" =
class=3D"label label-default GLGRQ1ODHEC temp-link-color"><br></span></div>=
<div><span aria-hidden=3D"false" class=3D"label label-default GLGRQ1ODHEC t=
emp-link-color">Cannot Login. User Password has expired. Use the following =
URL to change the password: (nothing)</span></div><div><span aria-hidden=3D=
"false" class=3D"label label-default GLGRQ1ODHEC temp-link-color"><br></spa=
n></div><div><span aria-hidden=3D"false" class=3D"label label-default GLGRQ=
1ODHEC temp-link-color">I have try out with different long passwords and di=
fferent users, but it's same.</span></div><div><span aria-hidden=3D"false" =
class=3D"label label-default GLGRQ1ODHEC temp-link-color"><br>Is this versi=
on compatible with ovirt 3.5?</span></div><div><br></div><div>What did I wr=
ong?</div><div><br></div><div>Thanks in advance,</div><div>Tibor</div></div=
></body></html>
------=_Part_6727133_325728685.1416415592421--
10 years, 5 months
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
by Juan Pablo Lorier
Hi,
In my experience, having ovirt traffic on the same nic that gluster can
make your platafrom unstable. I was using it for large file storage and
gluster has so big traffic that ovirt got confused and started marking
hosts as unavailable because of hi latency.
I've opened an RFE over a year ago, but had no luck with the team to get
it done. In the RFE I was asking to have a way in the UI to decide which
nic to use for gluster other than the MGMT net that is the one ovirt
lets you use.
There's another way to do this and it's from outside ovirt. There you
have to unregister and re register the bricks using gluster console
commands. This way, when you register the bricks, you can specify the IP
address of the spare NIC and then the traffic will not interfere with
the mgmt.
There's a step that I don't recall much, but ovirt is going to need to
know that the bricks are no longer is the mgmt IP, maybe someone else in
the list can help with this. I can tell you that if you search the list
you'll see my posts about this and the replys of those who helped my
back then.
Regards,
10 years, 5 months
oVirt Weekly Sync Meeting: Nov. 19, 2014
by Brian Proffitt
Minutes: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.html
Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.txt
Log: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.log.html
=========================
#ovirt: oVirt Weekly Sync
=========================
Meeting started by bkp at 15:01:15 UTC. The full logs are available at
http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.log.html .
Meeting summary
---------------
* Agenda and Roll Call (bkp, 15:01:31)
* infra update (bkp, 15:01:38)
* 3.5.z updates (bkp, 15:01:38)
* 3.6.0 status (bkp, 15:01:38)
* conferences and workshops (bkp, 15:01:38)
* other topics (bkp, 15:01:39)
* infra update (bkp, 15:03:21)
* Infra We had an outage in phx2 lab a couple of days ago, seems to be
resolved. (bkp, 15:15:08)
* Infra We apparently lost our f21 slave, on which we try to run
functional vdsm tests (bkp, 15:15:11)
* Infra The state of vdsm jenkins jobs is a mess, people are waiting a
long time to get their credentials. (bkp, 15:15:14)
* ACTION: Infra dcaro: Discuss on mailing list how slave ownership
process can be sped up, per danken concerns in this week's meeting
(bkp, 15:15:17)
* Infra The team is understafffed and looking for help from developers
to maintain Jenkins jobs. (bkp, 15:15:20)
* 3.5.z updates (bkp, 15:15:32)
* 3.5.z updates Full report at
http://lists.ovirt.org/pipermail/users/2014-November/029282.html
(bkp, 15:23:57)
* 3.5.z updates Highlights from report: 4 blockers open, 5 regressions
to be reviewed (bkp, 15:24:00)
* 3.5.z updates RC for 3.5.1 is scheduled for next week, so ETA needed
on blockers (bkp, 15:24:03)
* 3.5.z updates Bug count is still high (150), review and either scrub
or postpone to next release if not blocking or urgent. (bkp,
15:24:06)
* 3.5.z updates .el7 support for engine is completely built and fully
testable on el7. Help testing nightly snapshot prior to RC next week
is welcome. (bkp, 15:24:09)
* infra update part 2 (bkp, 15:25:05)
* Infra An engine upgrade and jenkins upgrade were performed last
week. The engine upgrade is not finalized yet (had some issues with
vdsm, looking into it) but the system is stable now, have to plan
with caution to finish the upgrade. (Hoipefully next week) (bkp,
15:28:30)
* Infra We currently investigating an issue which could be related
when creating a volume on RHEL 6.6, but that is still under
investigation (bkp, 15:28:34)
* 3.5.z updates part 2 (bkp, 15:31:31)
* 3.5.z updates There may be a problem installing on el6.6 hosts. Bug
1162539 libvirtd cannot be started using upstart if started manually
using sysvinit. Let's check this one out, please. (bkp, 15:31:42)
* 3.6 status (bkp, 15:32:00)
* 3.6 status Full report at #info 3.5.z updates Full report at
http://lists.ovirt.org/pipermail/users/2014-November/029282.html
(bkp, 15:45:02)
* 3.6 status No blockers! Well, that's expected. (bkp, 15:45:05)
* 3.6 status External Project Schedules to the report for having a
look at what will be out with oVirt (bkp, 15:45:07)
* 3.6 status Discussion about release process / release criteria
should have been closed last week, but no progress since its opening
(bkp, 15:45:10)
* ACTION: 3.6 status All: If you want to have a say in the release
process, get in on the discussion:
http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria
http://lists.ovirt.org/pipermail/devel/2014-September/008695.html
(bkp, 15:45:13)
* 3.6 status scheduling / timeline is not yet defined for 3.6 hope to
get a cleaner view on what's going to be in for next week. (bkp,
15:45:17)
* 3.6 status Still looking at 6 months out in both release process
proposals, but danken has a proposal to extend the cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
(bkp, 15:45:20)
* ACTION: 3.6 status All: let's examine and vote on proposal to extend
the cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
(bkp, 15:45:24)
* 3.6 status CORRECTION: Still looking at 6 months out in both release
process proposals, but danken has a proposal to change the cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
(bkp, 15:46:56)
* ACTION: 3.6 status CORRECTION: All: let's examine and vote on
proposal to chage the cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
(bkp, 15:47:00)
* conferences and workshops (bkp, 15:47:46)
* LISA14 went pretty well. Booth traffic was solid, gshereme and bkp
answered a fair amount of general questions about oVirt, and talked
to a lot of sysadmins with specific queries on oVirt. (bkp,
15:48:01)
* FOSDEM is the next big event. OSAS will be very much on the scene,
and oVirt has applied for a booth at the event. There is still time
to get your talks into the IaaS and Virt devrooms. (bkp, 15:48:05)
* Now that travel is wrapped up, I am working on getting meetup and
workshop materials ready for anyone who wants to present on oVirt at
a local event. (bkp, 15:48:09)
* 11th Intl. Conf. on Open Source Systems CFP Open Through Jan. 10
call for papers http://www.oss2015.org/call-for-papers/ (bkp,
15:50:45)
* other topics (bkp, 15:51:11)
* A big welcome to our new OPW interns! Be ready to assist with any of
their questions as they lurk about the channel and the lists! (bkp,
15:51:23)
* It was brought to my attention this morning that ovirt.org/stats has
not been working for a while. I have asked misc to look into it.
(bkp, 15:51:26)
* Speaking of stats, downloads for oVirt engine in Oct. totaled 1460
from resources.ovirt.org. This is down from 2194 downloads in Sept.
Likely now that 3.5 is rolling out, this trend will likely change.
(bkp, 15:51:29)
* One of the big goals we should have for 2015 is figuring out a way
to determine actual installs of oVirt. If anyone has ideas on how we
can pull such information together, let's get a discussion going on
the users mailing list. (bkp, 15:51:33)
* Finally, there is an informal survey out on the users mailing list
now about extending oVirt support to Debian/Ubuntu. Got thoughts on
this? Here's the thread:
http://lists.ovirt.org/pipermail/users/2014-November/029209.html
(bkp, 15:51:37)
Meeting ended at 15:55:01 UTC.
Action Items
------------
* Infra dcaro: Discuss on mailing list how slave ownership process can
be sped up, per danken concerns in this week's meeting
* 3.6 status All: If you want to have a say in the release process, get
in on the discussion:
http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria
http://lists.ovirt.org/pipermail/devel/2014-September/008695.html
* 3.6 status All: let's examine and vote on proposal to extend the
cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
* 3.6 status CORRECTION: All: let's examine and vote on proposal to
chage the cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
Action Items, by person
-----------------------
* danken
* Infra dcaro: Discuss on mailing list how slave ownership process can
be sped up, per danken concerns in this week's meeting
* dcaro
* Infra dcaro: Discuss on mailing list how slave ownership process can
be sped up, per danken concerns in this week's meeting
* **UNASSIGNED**
* 3.6 status All: If you want to have a say in the release process,
get in on the discussion:
http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria
http://lists.ovirt.org/pipermail/devel/2014-September/008695.html
* 3.6 status All: let's examine and vote on proposal to extend the
cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
* 3.6 status CORRECTION: All: let's examine and vote on proposal to
chage the cycle.
http://lists.ovirt.org/pipermail/users/2014-November/028875.html
People Present (lines said)
---------------------------
* bkp (85)
* sbonazzo (43)
* lvernia (17)
* danken (15)
* rgolan (8)
* dcaro (6)
* mlipchuk (5)
* ofrenkel (2)
* ovirtbot (2)
* tal (1)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
--
Brian Proffitt
Community Liaison
oVirt
Open Source and Standards, Red Hat - http://community.redhat.com
Phone: +1 574 383 9BKP
IRC: bkp @ OFTC
10 years, 5 months
Sizing the master storage domain
by Nicolas Ecarnot
Hi,
I know Itamar explained that the notion of master storage domain will
disappear in some releases.
But now, with a 3.4 I'm installing, I was wondering :
- on my other oVirt setups, I started with one big (iSCSI) LUN, which is
the master, and stored as many VMs I could
- when space came to miss, I added another LUN, the another...
- when I have to do some maintenance (grow, disable, other...) on a LUN,
I can move my VM disks amongst the normal storage domains. When Empty, I
can switch them off, add others, and so on
The only one I can not play with is the master one.
I came to think that I had no benefice storing anything on the master
storage domain, and use only the normal storage domains.
And then, I came to think I had no reason to dedicate a huge LUN for the
master.
Ok, but according to you, what is the minimum reasonable size for a
master storage domain?
--
Nicolas Ecarnot
10 years, 5 months
disabling generic-receive-offload (gro) and large-receive-offload ?
by Ernest Beinrohr
This is a multi-part message in MIME format.
--------------000807010908080602070902
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Hi, is there a way of setting eth parameters for hypervisors? My freebsd
instance has terrible performance when these are enabled. Currently I
run these on all hypervisors manually.
ethtool –K vnet0 gro off
ethtool –K vnet2 gro off
ethtool –K vnet0 lro off
ethtool –K vnet2 lro off
as per:
http://support.citrix.com/proddocs/topic/netscaler-vpx-10-5/ns-vpx-instal...
--
Ernest Beinrohr, AXON PRO
Ing <http://www.beinrohr.sk/ing.php>, RHCE
<http://www.beinrohr.sk/rhce.php>, RHCVA
<http://www.beinrohr.sk/rhce.php>, LPIC
<http://www.beinrohr.sk/lpic.php>, VCA <http://www.beinrohr.sk/vca.php>,
+421-2-62410360 +421-903-482603
--------------000807010908080602070902
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hi, is there a way of setting eth parameters for hypervisors? My
freebsd instance has terrible performance when these are enabled.
Currently I run these on all hypervisors manually.<br>
<br>
<pre class="pre codeblock">ethtool –K vnet0 gro off
ethtool –K vnet2 gro off
ethtool –K vnet0 lro off
ethtool –K vnet2 lro off</pre>
<br>
as per:
<a class="moz-txt-link-freetext" href="http://support.citrix.com/proddocs/topic/netscaler-vpx-10-5/ns-vpx-instal...">http://support.citrix.com/proddocs/topic/netscaler-vpx-10-5/ns-vpx-instal...</a><br>
<br>
<div class="moz-signature">-- <br>
<div id="oernii_footer" style="color: gray;">
<span style="font-family: Lucida Console, Luxi Mono, Courier,
monospace; font-size: 90%;">
Ernest Beinrohr, AXON PRO<br>
<a style="text-decoration: none; color: gray;"
href="http://www.beinrohr.sk/ing.php">Ing</a>, <a
style="text-decoration: none; color: gray;"
href="http://www.beinrohr.sk/rhce.php">RHCE</a>, <a
style="text-decoration: none; color: gray;"
href="http://www.beinrohr.sk/rhce.php">RHCVA</a>, <a
style="text-decoration: none; color: gray;"
href="http://www.beinrohr.sk/lpic.php">LPIC</a>, <a
style="text-decoration: none; color: gray;"
href="http://www.beinrohr.sk/vca.php">VCA</a>, <br>
+421-2-62410360 +421-903-482603
<br>
</span> </div>
<img
src="http://nojsstats.appspot.com/UA-44497096-1/email.beinrohr.sk"
moz-do-not-send="true" border="0" height="1" width="1">
</div>
</body>
</html>
--------------000807010908080602070902--
10 years, 5 months
Gluster access tied to one node?
by Chris Adams
So this may be a dumb question, but here goes...
I set up a replicated Gluster volume for VM disk image storage. I
specified the path as node9:gluster1 (where node9 is one of the two
nodes with a brick). However, when I shut down node9, the VM using that
storage automatically gets paused.
I thought the replicated storage was supposed to work even if one node
was down. Is there some other way to specify the path (did I do that
wrong)?
--
Chris Adams <cma(a)cmadams.net>
10 years, 5 months
Complete evalution of backup solutions
by Mario Giammarco
Hello,
I am evaluating ovirt and considering backups.
I have three solutions:
1) iscsi san that does snapshots
2) Glusterfs
3) ovirt api
So I have these questions:
- if I use 1) can I import a snapshot as different storage domain?
- glusterfs snapshot implementation is ready? Can I do consistent backups
of gluster bricks?
- is there an opensource backup software that can do incremental backups
using ovirt api?
Thanks in advance for interest,
Mario
10 years, 5 months
change ovirt and node hostname.fqdn - all in one installation
by Grzegorz Szypa
Hi.
I have a problem with changing ovirt hostname:
I change the following:
1. config in /etc/hosts and /etc/sysconfig/network and restart machine
2. /usr/share/ovirt-engine/setup/bin/ovirt-engine-rename --newname=<new
hostname.fqdn>
3. engine-setup
But still a problem with changing address in node in webadmin portal.
Have somebody any idea how to do it?
--
G.Sz.
10 years, 5 months
Engine: Get guest XML dump
by Daniel Helgenberger
Hello,
after working with Foreman for a while come to love the yaml dump
feature for hosts as it proved invaluable for debugging and setups [1].
After some questions on the list here if for instance libgfapi is being
used I think such a feature also might prove useful in oVirt.
Right now, I log into the host running the vm and to this with virsh
dumpxml.
I imagine something like -> right click on a guest and choose 'XML
dump'; or a XML tap in the VM edit window.
If somebody else thinks this is useful too, I will open a RFE.
Cheers,
[1] https://www.youtube.com/watch?v=Ksr0tilbmcc#t=78
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen.tv
Geschäftsführer: Martin Retschitzegger / Michaela Göllner
Handeslregister: Amtsgericht Charlottenburg / HRB 112767
10 years, 5 months
Reminder - oVirt Sync Meeting time change following DST.
by Sandro Bonazzola
Hi,
just a quick reminder about oVirt Sync Meeting: following DST changes the meeting is now
16:00 - 17:00 CET
15:00 - 16:00 UTC
To get the new time in your timezone just run:
date --date "15:00 UTC"
Thanks,
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 5 months
VMs guest with Mac OS X on board
by Grzegorz Szypa
Hi Expert.
Is it possible to install virtual machines running Mac OS X on board.
I trying booting VM with mac os x ISO but it is ending with failed:
"Boot failed: could not read the boot disk"
--
G.Sz.
10 years, 5 months
Re: [ovirt-users] Balloon driver unavailable
by Amedeo Salvati
--_=__=_XaM3_.1415783080.2A.824340.42.27496.52.42.007.1552783447
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
you receive this error because on your cluster configurations you have ch=
ecked "Enable Memory Balloon Optimization", and on some of your VMs there=
aren't balloon driver available; if you don't want anymore this warning =
messages you can uncheck this under =0A=0AClusters -> (select your cluste=
r) edit -> Optimization -> uncheck Enable Memory Balloon Optimization=0A=0A=
Best Regards=0AAmedeo Salvati=0A=0A=0ADate: Wed, 12 Nov 2014 07:59:33 +00=
00=0AFrom: Karli Sj?berg <Karli.Sjoberg(a)slu.se>=0ATo: "tdemeter(a)itsmart.h=
u" <tdemeter(a)itsmart.hu>=0ACc: "users(a)ovirt.org" <users(a)ovirt.org>=0ASubj=
ect: Re: [ovirt-users] Balloon driver unavailable=0AMessage-ID: <5F9E965F=
5A80BC468BE5F40576769F099DF97243@exchange2-1>=0AContent-Type: text/plain;=
charset=3D"utf-8"=0A=0AOn Wed, 2014-11-12 at 08:35 +0100, Demeter Tibor =
wrote:=0A> Hi,=0A> =0A> =0A> I have a lot of centos 6 based vms and I hav=
e install "ovirt guest=0A> agent" for those vms. =0A> But two vm always s=
ay "The balloon driver on xxxvm on hostX is=0A> requested but unavailable=
"=0A> I did check the virtio_balloon module are loaded on vms.=0A> =0A> =0A=
> Anybody can me help?=0A> =0A> =0A> Thanks in advance=0A> =0A> =0A> Tibo=
r=0A=0A> I see that too, but only on Windows 2008 R2 guests... No one els=
e ever=0A> said anything about it, so I thought it was just me:)=0A
--_=__=_XaM3_.1415783080.2A.824340.42.27496.52.42.007.1552783447
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
=0A<div class=3D"xam_msg_class">=0A<div style=3D"font: normal 13px Arial;=
color:rgb(31, 28, 27);"><span dir=3D"ltr" id=3D"msgText_new_message_draf=
t1415782711271_25745">you receive this error because on your cluster conf=
igurations you have checked "Enable Memory Balloon Optimization", and on =
some of your VMs there aren't balloon driver available; if you don't want=
anymore this warning messages you can uncheck this under <br><br>Cluster=
s -> (select your cluster) edit -> Optimization -> uncheck Enabl=
e Memory Balloon Optimization<br><br>Best Regards<br>Amedeo Salvati<br><b=
r><br>Date: Wed, 12 Nov 2014 07:59:33 +0000<br>From: Karli Sj?berg <Ka=
rli.Sjoberg(a)slu.se><br>To: "tdemeter(a)itsmart.hu" <tdemeter(a)itsmart.=
hu><br>Cc: "users(a)ovirt.org" <users(a)ovirt.org><br>Subject: Re: [=
ovirt-users] Balloon driver unavailable<br>Message-ID: <5F9E965F5A80BC=
468BE5F40576769F099DF97243@exchange2-1><br>Content-Type: text/plain; c=
harset=3D"utf-8"<br><br>On Wed, 2014-11-12 at 08:35 +0100, Demeter Tibor =
wrote:<br>> Hi,<br>> <br>> <br>> I have a lot of centos 6 bas=
ed vms and I have install "ovirt guest<br>> agent" for those vms. <br>=
> But two vm always say "The balloon driver on xxxvm on hostX is<br>&g=
t; requested but unavailable"<br>> I did check the virtio_balloon modu=
le are loaded on vms.<br>> <br>> <br>> Anybody can me help?<br>&=
gt; <br>> <br>> Thanks in advance<br>> <br>> <br>> Tibor<b=
r><br>> I see that too, but only on Windows 2008 R2 guests... No one e=
lse ever<br>> said anything about it, so I thought it was just me:)<br=
></span></div>=0A</div>=0A
--_=__=_XaM3_.1415783080.2A.824340.42.27496.52.42.007.1552783447--
10 years, 5 months
[oVirt-Users] Problems of ImportStorageDomain
by Coffee Chou
Hi, all
I am testing the feature of ImprotStorageDomain recently, but meet some
problems.
http://www.ovirt.org/Features/ImportStorageDomain
http://www.ovirt.org/Features/ImportUnregisteredEntities
I have two setups: DC-A, DC-B, NFS storage: test-import
My steps are:
1. In DC-A, create some VMs and create their disks on test-import
2. maintenance the storage test-import, detach the storage from DC-A
3. login to DC-B, click "import domain", chose Data/NFS and enter the path
of test-import, click "ok"
4. Active storage test-import
Expect result:
1. there are two new subtags in test-import: "vm import" and "template
import"
2. the VMs which were create on test-import are listing in the subtag "vm
import"
3. I can chose VM and import it to DC-B
However, it worked randomly:
sometimes i can see subtags with VMs in DC-B, but sometimes i can not
see any VM, and sometimes i can't even see the subtags.
I tried to access RestAPI, but it return me these links:
<link
href="/api/storagedomains/c7492e17-4418-4a55-ad06-c39cea8c44cf/permissions"
rel="permissions"/>
<link
href="/api/storagedomains/c7492e17-4418-4a55-ad06-c39cea8c44cf/disks"
rel="disks"/>
<link
href="/api/storagedomains/c7492e17-4418-4a55-ad06-c39cea8c44cf/storageconnections"
rel="storageconnections"/>
<link
href="/api/storagedomains/c7492e17-4418-4a55-ad06-c39cea8c44cf/disksnapshots"
rel="disksnapshots"/>
<link
href="/api/storagedomains/c7492e17-4418-4a55-ad06-c39cea8c44cf/diskprofiles"
rel="diskprofiles"/>
without /vms and /templates tags
is this feature available now? or did i miss anything?
Thank you in advance:-)
10 years, 5 months
Optaplanner Problem
by s k
--_4acda39e-6832-4833-88a5-489ba11c0690_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi=2C
I have modified standalone.xml and replaced 127.0.0.1 with the IP address o=
f the server and the connection to optimizer:8080 works correctly.
Using Chrome I get "Waiting for data..."
Using Firefox I get "Status: Data refresh failed: undefined"
I inspected the page and when I click on the tab I get the following errors=
:
Blocked loading mixed active content "http://optimizer:8080/ovirt-optimizer=
/result/00000001-0001-0001-0001-0000000000a1"[Learn More] angular.js:8321
"/ovirt-engine/api/hosts" result.html:419
Exception { message: ""=2C result: 2153644038=2C name: ""=2C filename: "htt=
ps://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js"=2C lineNumb=
er: 8321=2C columnNumber: 0=2C inner: null=2C data: null=2C stack: "createH=
ttpBackend/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular=
.js:8321:6
sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8=
180:0
$http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/=
angular.js:7921:15
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30
qFactory/ref/<.then/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.1=
6/angular.js:11405:25
$RootScopeProvider/this.$get</Scope.prototype.$eval@https://ajax.googleapis=
.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15
$RootScopeProvider/this.$get</Scope.prototype.$digest@https://ajax.googleap=
is.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14
$RootScopeProvider/this.$get</Scope.prototype.$apply@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12
bootstrap/doBootstrap/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2=
.16/angular.js:1382:8
invoke@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:38=
69:13
bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.1=
6/angular.js:1380:0
bootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js=
:1394:0
angularInit@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.=
js:1307:4
@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4
trigger@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2=
509:6
createEventHandler/eventHandler/<@https://ajax.googleapis.com/ajax/libs/ang=
ularjs/1.2.16/angular.js:2780:6
forEach@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3=
30:10
createEventHandler/eventHandler@https://ajax.googleapis.com/ajax/libs/angul=
arjs/1.2.16/angular.js:2779:4
" } angular.js:9778
"Updating host 1c3b7899-bd75-4e26-aaf6-983b54c54be9" result.html:384
"Updating host fd0ea29e-2022-4a0f-8a5a-30c9b4497515" result.html:384
"Updating host 7c44018d-4517-4cda-8b21-cda31fc534d2" result.html:384
"Updating host 18152471-55d8-4cc0-8846-2071f29290df" result.html:384
"Error: $scope.result.hosts is undefined
$scope.recomputeResources@https://ovm/ovirt-engine/webadmin/plugin/oVirtOpt=
imizer/result.html#00000001-0001-0001-0001-0000000000a1:354:13
$scope.refreshHostInfo/<@https://ovm/ovirt-engine/webadmin/plugin/oVirtOpti=
mizer/result.html#00000001-0001-0001-0001-0000000000a1:387:17
$http/promise.success/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2=
.16/angular.js:7946:11
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31
qFactory/ref/<.then/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.1=
6/angular.js:11405:26
$RootScopeProvider/this.$get</Scope.prototype.$eval@https://ajax.googleapis=
.com/ajax/libs/angularjs/1.2.16/angular.js:12412:16
$RootScopeProvider/this.$get</Scope.prototype.$digest@https://ajax.googleap=
is.com/ajax/libs/angularjs/1.2.16/angular.js:12224:15
$RootScopeProvider/this.$get</Scope.prototype.$apply@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:12516:13
done@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8204=
:34
completeRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angu=
lar.js:8412:7
createHttpBackend/</xhr.onreadystatechange@https://ajax.googleapis.com/ajax=
/libs/angularjs/1.2.16/angular.js:8351:1
" angular.js:9778
"Updating vm 315f674b-24da-42d7-9580-aeed5703c20c" result.html:399
"Updating vm e5074245-e3cc-4423-bc08-ddaa32f876d4" result.html:399
"Updating vm f2c61fb9-ffd6-4b96-b7bc-645a328371b3" result.html:399
"Updating vm 0c114b32-1d9f-43a1-bf75-723a4a3a4735" result.html:399
"Updating vm b62219e2-59bd-4ee8-8ec9-fd3031403aa9" result.html:399
"Updating vm dfabf11c-6ddf-4d36-a8b4-64dd8d7eb986" result.html:399
"Updating vm 69536040-09be-40df-8a46-51a737edadb6" result.html:399
"Updating vm 9b00724b-0719-4b3b-b5c1-e304e3d14428" result.html:399
"Updating vm e980d298-6dfd-4daf-adfe-32ada4375815" result.html:399
"Updating vm 0aa48214-3377-41eb-9f29-2e0d926ab929" result.html:399
"Updating vm fd9da855-7ef0-4d13-abac-bf29d8c23193" result.html:399
"Updating vm fb333c71-1e4a-48bc-aa02-0acdc2efbd18" result.html:399
"Updating vm dfccdc33-0260-4f0e-8a4d-3c54e754f293" result.html:399
"Updating vm 7eb0f154-f70e-442c-9719-eebea0714646" result.html:399
"Updating vm 91af75e8-9bac-45e1-8cba-1c1f5e0056f4" result.html:399
"Updating vm 4320fd1c-e793-4b44-afda-a9b8d6caade8" result.html:399
"Updating vm acb28de9-f2d5-46cf-bb13-4dd77af516d5" result.html:399
"Updating vm 68a46af9-09e0-48d8-a8ec-c3c162cdc0f1" result.html:399
"Updating vm 2755eb4a-81a8-4470-870a-786a538b53da" result.html:399
"Updating vm 2d8d45b9-6b26-4de6-9093-6f3c3381b3be" result.html:399
"Updating vm 941bedb8-d0ba-4b39-a59e-fc3bfce465ec" result.html:399
"Updating vm 2fa8c60f-45a4-48ba-aa4b-7108185cb38b" result.html:399
"Updating vm 7ce8d941-646d-440f-ad57-27e5bb936db0" result.html:399
"Updating vm ade810f2-5e98-4a35-b09d-f76027985f1a" result.html:399
"Updating vm 0e5949ae-0c11-43a2-8110-ff3e6940416d" result.html:399
"Updating vm 1e20e2c5-f97d-4612-bd34-c291b2da5dd4" result.html:399
"Updating vm 88a36a05-cca0-425b-a285-b527ce6fa1c6" result.html:399
"Updating vm 10c225ee-542c-477f-8a88-31a8804e75b7" result.html:399
"Updating vm 10c65984-8f53-4a22-b28f-30562b002f51" result.html:399
"Updating vm 9b6fcbbf-dffc-405b-8380-78cbd2268c6e" result.html:399
"Updating vm 7824fa7f-8a2f-46fe-a88f-e0fd770b0d1f" result.html:399
"Updating vm d6cfdd5c-e4d7-4eef-bb15-6e235ff5a4e7" result.html:399
"Updating vm 209cda34-fc7a-4976-9075-4dd3ca71e9cd" result.html:399
"Updating vm 1d22c70d-3d3e-4b75-afae-b782451e073f" result.html:399
"Updating vm e18d33a4-5cf2-4bfc-b70e-6d0a89e74f5d" result.html:399
"Updating vm 1282c0ed-f753-4484-bb4e-82d41febbba4" result.html:399
"Updating vm a196d738-d76c-4e97-8669-bd85f6bea5da" result.html:399
"Updating vm 7d462f41-fd72-4a0f-ba8d-9dc7bf23b581" result.html:399
"Updating vm cb1c4af3-887e-4fee-b74d-6315ed12c056" result.html:399
"Updating vm 6b2a185b-2d4b-4382-922e-9635466dcb3a" result.html:399
"Updating vm 9b1f8743-c602-4924-8a14-7cae25e77900" result.html:399
"Updating vm aebdede3-b00a-4565-833e-1eb86ee36ff0" result.html:399
"Updating vm 6e42567b-30b7-4486-b9af-b5c9f426ec0f" result.html:399
"Updating vm bf691404-3cd8-4484-9c60-c3c6f9bdbbbb" result.html:399
"Updating vm 79ee24d4-502a-4e6c-b6db-ee6b9f41d2f1" result.html:399
"Updating vm 00bd150e-911f-432c-9e2c-caecfe944944" result.html:399
"Updating vm 8aa3422b-ad2c-4753-9784-3ded1ac5d89e" result.html:399
"Updating vm 6fb3683e-b8c1-45dd-9c1b-1a86ae810890" result.html:399
"Error: $scope.result.hosts is undefined
$scope.recomputeResources@https://ovm/ovirt-engine/webadmin/plugin/oVirtOpt=
imizer/result.html#00000001-0001-0001-0001-0000000000a1:354:13
$scope.refreshVmInfo/<@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimi=
zer/result.html#00000001-0001-0001-0001-0000000000a1:402:17
$http/promise.success/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2=
.16/angular.js:7946:11
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31
qFactory/ref/<.then/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.1=
6/angular.js:11405:26
$RootScopeProvider/this.$get</Scope.prototype.$eval@https://ajax.googleapis=
.com/ajax/libs/angularjs/1.2.16/angular.js:12412:16
$RootScopeProvider/this.$get</Scope.prototype.$digest@https://ajax.googleap=
is.com/ajax/libs/angularjs/1.2.16/angular.js:12224:15
$RootScopeProvider/this.$get</Scope.prototype.$apply@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:12516:13
done@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8204=
:34
completeRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angu=
lar.js:8412:7
createHttpBackend/</xhr.onreadystatechange@https://ajax.googleapis.com/ajax=
/libs/angularjs/1.2.16/angular.js:8351:1
" angular.js:9778
Blocked loading mixed active content "http://optimizer:8080/ovirt-optimizer=
/result/00000001-0001-0001-0001-0000000000a1/score"[Learn More] angular.js:=
8321
Exception { message: ""=2C result: 2153644038=2C name: ""=2C filename: "htt=
ps://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js"=2C lineNumb=
er: 8321=2C columnNumber: 0=2C inner: null=2C data: null=2C stack: "createH=
ttpBackend/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular=
.js:8321:6
sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8=
180:0
$http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/=
angular.js:7921:15
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30
qFactory/ref/<.then/<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.1=
6/angular.js:11405:25
$RootScopeProvider/this.$get</Scope.prototype.$eval@https://ajax.googleapis=
.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15
$RootScopeProvider/this.$get</Scope.prototype.$digest@https://ajax.googleap=
is.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14
$RootScopeProvider/this.$get</Scope.prototype.$apply@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12
timeout/timeoutId<@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/a=
ngular.js:14023:24
completeOutstandingRequest@https://ajax.googleapis.com/ajax/libs/angularjs/=
1.2.16/angular.js:4300:6
Browser/self.defer/timeoutId<@https://ajax.googleapis.com/ajax/libs/angular=
js/1.2.16/angular.js:4601:6
" } angular.js:9778
By the way=2C the server.log file on the optimizer server is in debug mode =
and constantly writes the following lines:
DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76=
) Closing expired connections
DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76=
) Closing connections idle longer than 30 SECONDS
the file is getting very big (1GB per day) and I tried to change the log le=
vel but I couldn't. Can you please tell me how can I switch it?
Thanks=2C
Sokratis
----- Original Message -----
>
>Hi=2C=0A=
>=0A=
>Please check the browser's debug console for error messages. Then check th=
e firewall and jboss configuration on the Optimizer server.=0A=
>=0A=
>The JBoss log on the optimizer machine will tell you whether it does some =
computations (you will see score lines).=0A=
>Then try manually connecting (telnet) to optimizer:8080 from your machine =
(the same where the webadmin is running). =0A=
>=0A=
>We need more data to be able to give you more specific instructions.=0A=
>=0A=
>--=0A=
>Martin Siv=E1k=0A=
>msivak at redhat.com=0A=
>Red Hat Czech=0A=
>RHEV-M SLA / Brno=2C CZ=0A=
>=0A=
----- Original Message -----=0A=
> What is your web browser? In my case =2C if i use the Chrome then the sta=
tus=0A=
> would be "Waiting for data..." forever=2C=0A=
> but when i use Firefox then everything is ok.=0A=
> =0A=
> by the way=2C please make sure that you optimizer can be connected from=
=0A=
> ovirt-engine firstly.=0A=
> e.g. if you use jboss=2C you need to run the following command:=0A=
> ./standalone.sh -b 0.0.0.0=0A=
> if you have no -b option in your command line=2C then only localhost can =
access=0A=
> the optimizer.=0A=
> =0A=
> =0A=
> like.ma at cs2c.com.cn=0A=
> =0A=
> =0A=
> =0A=
> From: s k=0A=
> Date: 2014-11-18 16:34=0A=
> To: Doron Fediuck=0A=
> CC: users at ovirt.org=0A=
> Subject: Re: [ovirt-users] Optaplanner Problem=0A=
> Network access is working both sides and i don't see any errors in the lo=
gs.=0A=
> You can see a screenshot of the tab in the below link:=0A=
> =0A=
> http://picpaste.com/Optimizer_1-9UdHfclq.png=0A=
> =0A=
> > Date: Mon=2C 17 Nov 2014 11:14:16 -0500=0A=
> > From: dfediuck at redhat.com=0A=
> > To: sokratis123k at outlook.com=0A=
> > CC: users at ovirt.org=3B msivak at redhat.com=0A=
> > Subject: Re: [ovirt-users] Optaplanner Problem=0A=
> > =0A=
> > =0A=
> > =0A=
> > ----- Original Message -----=0A=
> > > From: "s k" <sokratis123k at outlook.com>=0A=
> > > To: users at ovirt.org=0A=
> > > Sent: Monday=2C November 17=2C 2014 1:52:42 PM=0A=
> > > Subject: [ovirt-users] Optaplanner Problem=0A=
> > > =0A=
> > > Hello=2C=0A=
> > > =0A=
> > > =0A=
> > > I upgraded oVirt to version 3.5.0 today and I also installed Optaplan=
ner=0A=
> > > in a=0A=
> > > separate VM. While the installation was successful the Optimizer tab =
in=0A=
> > > oVirt Engine doesn't report the correct information. Although there a=
re=0A=
> > > VMs=0A=
> > > that are shutdown and the hosts are not balanced in terms of memory u=
sage=0A=
> > > the Optimized tab reports the following:=0A=
> > > =0A=
> > > =0A=
> > > SOLUTION STATUS=0A=
> > > =0A=
> > > Status: Waiting for data...=0A=
> > > =0A=
> > > Solution is being refreshed every 30 seconds.=0A=
> > > =0A=
> > > Freeze solution=0A=
> > > =0A=
> > > VMS THAT SHOULD BE STARTED=0A=
> > > =0A=
> > > No VM starts are requested at this moment.=0A=
> > > =0A=
> > > MIGRATION / START STEPS=0A=
> > > =0A=
> > > No migrations are needed at this moment. The state is stable.=0A=
> > > =0A=
> > > TARGET STATE=0A=
> > > =0A=
> > > host vm memory [all in GB]=0A=
> > > used available=0A=
> > > =0A=
> > > =0A=
> > > =0A=
> > > No information is displayed in TARGET STATE.=0A=
> > > =0A=
> > =0A=
> > Hi=2C=0A=
> > it seems that the optimizer is not getting information=0A=
> > from the engine DB=2C or the UI plugin cannot connect the=0A=
> > Optimizer.=0A=
> > Do you see any meaningful information in the UI?=0A=
> =0A=
> _______________________________________________=0A=
> Users mailing list=0A=
> Users at ovirt.org=0A=
> http://lists.ovirt.org/mailman/listinfo/users=0A=
> =
--_4acda39e-6832-4833-88a5-489ba11c0690_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'><pre>Hi=2C<br><br><br>I have mod=
ified standalone.xml and replaced 127.0.0.1 with the IP address of the serv=
er and the connection to optimizer:8080 works correctly.<br><br><br>Using C=
hrome I get "Waiting for data..."<br><br><br>Using Firefox I get "Status: D=
ata refresh failed: undefined"<br><br>I inspected the page and when I click=
on the tab I get the following errors:<br><br><br><br><br>Blocked loading =
mixed active content "http://optimizer:8080/ovirt-optimizer/result/00000001=
-0001-0001-0001-0000000000a1"[Learn More] angular.js:8321<br>"/ovirt-engine=
/api/hosts" result.html:419<br>Exception { message: ""=2C result: 215364403=
8=2C name: ""=2C filename: "https://ajax.googleapis.com/ajax/libs/angularjs=
/1.2.16/angular.js"=2C lineNumber: 8321=2C columnNumber: 0=2C inner: null=
=2C data: null=2C stack: "createHttpBackend/<=3B@https://ajax.googleapis.=
com/ajax/libs/angularjs/1.2.16/angular.js:8321:6<br>sendReq@https://ajax.go=
ogleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0<br>$http/serverRe=
quest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:792=
1:15<br>qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.g=
oogleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30<br>qFactory/de=
fer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/=
libs/angularjs/1.2.16/angular.js:11319:30<br>qFactory/ref/<=3B.then/<=
=3B@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405=
:25<br>$RootScopeProvider/this.$get<=3B/Scope.prototype.$eval@https://aja=
x.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15<br>$RootSco=
peProvider/this.$get<=3B/Scope.prototype.$digest@https://ajax.googleapis.=
com/ajax/libs/angularjs/1.2.16/angular.js:12224:14<br>$RootScopeProvider/th=
is.$get<=3B/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/=
angularjs/1.2.16/angular.js:12516:12<br>bootstrap/doBootstrap/<=3B@https:=
//ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1382:8<br>invok=
e@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3869:13=
<br>bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1=
.2.16/angular.js:1380:0<br>bootstrap@https://ajax.googleapis.com/ajax/libs/=
angularjs/1.2.16/angular.js:1394:0<br>angularInit@https://ajax.googleapis.c=
om/ajax/libs/angularjs/1.2.16/angular.js:1307:4<br>@https://ajax.googleapis=
.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4<br>trigger@https://ajax.=
googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2509:6<br>createEventH=
andler/eventHandler/<=3B@https://ajax.googleapis.com/ajax/libs/angularjs/=
1.2.16/angular.js:2780:6<br>forEach@https://ajax.googleapis.com/ajax/libs/a=
ngularjs/1.2.16/angular.js:330:10<br>createEventHandler/eventHandler@https:=
//ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2779:4<br>" } a=
ngular.js:9778<br><br>"Updating host 1c3b7899-bd75-4e26-aaf6-983b54c54be9" =
result.html:384<br>"Updating host fd0ea29e-2022-4a0f-8a5a-30c9b4497515" res=
ult.html:384<br>"Updating host 7c44018d-4517-4cda-8b21-cda31fc534d2" result=
.html:384<br>"Updating host 18152471-55d8-4cc0-8846-2071f29290df" result.ht=
ml:384<br>"Error: $scope.result.hosts is undefined<br>$scope.recomputeResou=
rces@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#00=
000001-0001-0001-0001-0000000000a1:354:13<br>$scope.refreshHostInfo/<=3B@=
https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0000000=
1-0001-0001-0001-0000000000a1:387:17<br>$http/promise.success/<=3B@https:=
//ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7946:11<br>qFac=
tory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.co=
m/ajax/libs/angularjs/1.2.16/angular.js:11319:31<br>qFactory/defer/deferred=
.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angular=
js/1.2.16/angular.js:11319:31<br>qFactory/ref/<=3B.then/<=3B@https://aj=
ax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:26<br>$RootSc=
opeProvider/this.$get<=3B/Scope.prototype.$eval@https://ajax.googleapis.c=
om/ajax/libs/angularjs/1.2.16/angular.js:12412:16<br>$RootScopeProvider/thi=
s.$get<=3B/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/=
angularjs/1.2.16/angular.js:12224:15<br>$RootScopeProvider/this.$get<=3B/=
Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.=
16/angular.js:12516:13<br>done@https://ajax.googleapis.com/ajax/libs/angula=
rjs/1.2.16/angular.js:8204:34<br>completeRequest@https://ajax.googleapis.co=
m/ajax/libs/angularjs/1.2.16/angular.js:8412:7<br>createHttpBackend/<=3B/=
xhr.onreadystatechange@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.=
16/angular.js:8351:1<br>" angular.js:9778<br><br>"Updating vm 315f674b-24da=
-42d7-9580-aeed5703c20c" result.html:399<br>"Updating vm e5074245-e3cc-4423=
-bc08-ddaa32f876d4" result.html:399<br>"Updating vm f2c61fb9-ffd6-4b96-b7bc=
-645a328371b3" result.html:399<br>"Updating vm 0c114b32-1d9f-43a1-bf75-723a=
4a3a4735" result.html:399<br>"Updating vm b62219e2-59bd-4ee8-8ec9-fd3031403=
aa9" result.html:399<br>"Updating vm dfabf11c-6ddf-4d36-a8b4-64dd8d7eb986" =
result.html:399<br>"Updating vm 69536040-09be-40df-8a46-51a737edadb6" resul=
t.html:399<br>"Updating vm 9b00724b-0719-4b3b-b5c1-e304e3d14428" result.htm=
l:399<br>"Updating vm e980d298-6dfd-4daf-adfe-32ada4375815" result.html:399=
<br>"Updating vm 0aa48214-3377-41eb-9f29-2e0d926ab929" result.html:399<br>"=
Updating vm fd9da855-7ef0-4d13-abac-bf29d8c23193" result.html:399<br>"Updat=
ing vm fb333c71-1e4a-48bc-aa02-0acdc2efbd18" result.html:399<br>"Updating v=
m dfccdc33-0260-4f0e-8a4d-3c54e754f293" result.html:399<br>"Updating vm 7eb=
0f154-f70e-442c-9719-eebea0714646" result.html:399<br>"Updating vm 91af75e8=
-9bac-45e1-8cba-1c1f5e0056f4" result.html:399<br>"Updating vm 4320fd1c-e793=
-4b44-afda-a9b8d6caade8" result.html:399<br>"Updating vm acb28de9-f2d5-46cf=
-bb13-4dd77af516d5" result.html:399<br>"Updating vm 68a46af9-09e0-48d8-a8ec=
-c3c162cdc0f1" result.html:399<br>"Updating vm 2755eb4a-81a8-4470-870a-786a=
538b53da" result.html:399<br>"Updating vm 2d8d45b9-6b26-4de6-9093-6f3c3381b=
3be" result.html:399<br>"Updating vm 941bedb8-d0ba-4b39-a59e-fc3bfce465ec" =
result.html:399<br>"Updating vm 2fa8c60f-45a4-48ba-aa4b-7108185cb38b" resul=
t.html:399<br>"Updating vm 7ce8d941-646d-440f-ad57-27e5bb936db0" result.htm=
l:399<br>"Updating vm ade810f2-5e98-4a35-b09d-f76027985f1a" result.html:399=
<br>"Updating vm 0e5949ae-0c11-43a2-8110-ff3e6940416d" result.html:399<br>"=
Updating vm 1e20e2c5-f97d-4612-bd34-c291b2da5dd4" result.html:399<br>"Updat=
ing vm 88a36a05-cca0-425b-a285-b527ce6fa1c6" result.html:399<br>"Updating v=
m 10c225ee-542c-477f-8a88-31a8804e75b7" result.html:399<br>"Updating vm 10c=
65984-8f53-4a22-b28f-30562b002f51" result.html:399<br>"Updating vm 9b6fcbbf=
-dffc-405b-8380-78cbd2268c6e" result.html:399<br>"Updating vm 7824fa7f-8a2f=
-46fe-a88f-e0fd770b0d1f" result.html:399<br>"Updating vm d6cfdd5c-e4d7-4eef=
-bb15-6e235ff5a4e7" result.html:399<br>"Updating vm 209cda34-fc7a-4976-9075=
-4dd3ca71e9cd" result.html:399<br>"Updating vm 1d22c70d-3d3e-4b75-afae-b782=
451e073f" result.html:399<br>"Updating vm e18d33a4-5cf2-4bfc-b70e-6d0a89e74=
f5d" result.html:399<br>"Updating vm 1282c0ed-f753-4484-bb4e-82d41febbba4" =
result.html:399<br>"Updating vm a196d738-d76c-4e97-8669-bd85f6bea5da" resul=
t.html:399<br>"Updating vm 7d462f41-fd72-4a0f-ba8d-9dc7bf23b581" result.htm=
l:399<br>"Updating vm cb1c4af3-887e-4fee-b74d-6315ed12c056" result.html:399=
<br>"Updating vm 6b2a185b-2d4b-4382-922e-9635466dcb3a" result.html:399<br>"=
Updating vm 9b1f8743-c602-4924-8a14-7cae25e77900" result.html:399<br>"Updat=
ing vm aebdede3-b00a-4565-833e-1eb86ee36ff0" result.html:399<br>"Updating v=
m 6e42567b-30b7-4486-b9af-b5c9f426ec0f" result.html:399<br>"Updating vm bf6=
91404-3cd8-4484-9c60-c3c6f9bdbbbb" result.html:399<br>"Updating vm 79ee24d4=
-502a-4e6c-b6db-ee6b9f41d2f1" result.html:399<br>"Updating vm 00bd150e-911f=
-432c-9e2c-caecfe944944" result.html:399<br>"Updating vm 8aa3422b-ad2c-4753=
-9784-3ded1ac5d89e" result.html:399<br>"Updating vm 6fb3683e-b8c1-45dd-9c1b=
-1a86ae810890" result.html:399<br>"Error: $scope.result.hosts is undefined<=
br>$scope.recomputeResources@https://ovm/ovirt-engine/webadmin/plugin/oVirt=
Optimizer/result.html#00000001-0001-0001-0001-0000000000a1:354:13<br>$scope=
.refreshVmInfo/<=3B@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimiz=
er/result.html#00000001-0001-0001-0001-0000000000a1:402:17<br>$http/promise=
.success/<=3B@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angu=
lar.js:7946:11<br>qFactory/defer/deferred.promise.then/wrappedCallback@http=
s://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31<br>q=
Factory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis=
.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31<br>qFactory/ref/<=3B.=
then/<=3B@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.=
js:11405:26<br>$RootScopeProvider/this.$get<=3B/Scope.prototype.$eval@htt=
ps://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:16<br>=
$RootScopeProvider/this.$get<=3B/Scope.prototype.$digest@https://ajax.goo=
gleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:15<br>$RootScopePro=
vider/this.$get<=3B/Scope.prototype.$apply@https://ajax.googleapis.com/aj=
ax/libs/angularjs/1.2.16/angular.js:12516:13<br>done@https://ajax.googleapi=
s.com/ajax/libs/angularjs/1.2.16/angular.js:8204:34<br>completeRequest@http=
s://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8412:7<br>cre=
ateHttpBackend/<=3B/xhr.onreadystatechange@https://ajax.googleapis.com/aj=
ax/libs/angularjs/1.2.16/angular.js:8351:1<br>" angular.js:9778<br><br>Bloc=
ked loading mixed active content "http://optimizer:8080/ovirt-optimizer/res=
ult/00000001-0001-0001-0001-0000000000a1/score"[Learn More] angular.js:8321=
<br>Exception { message: ""=2C result: 2153644038=2C name: ""=2C filename: =
"https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js"=2C line=
Number: 8321=2C columnNumber: 0=2C inner: null=2C data: null=2C stack: "cre=
ateHttpBackend/<=3B@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.1=
6/angular.js:8321:6<br>sendReq@https://ajax.googleapis.com/ajax/libs/angula=
rjs/1.2.16/angular.js:8180:0<br>$http/serverRequest@https://ajax.googleapis=
.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15<br>qFactory/defer/deferr=
ed.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angul=
arjs/1.2.16/angular.js:11319:30<br>qFactory/defer/deferred.promise.then/wra=
ppedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular=
.js:11319:30<br>qFactory/ref/<=3B.then/<=3B@https://ajax.googleapis.com=
/ajax/libs/angularjs/1.2.16/angular.js:11405:25<br>$RootScopeProvider/this.=
$get<=3B/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angu=
larjs/1.2.16/angular.js:12412:15<br>$RootScopeProvider/this.$get<=3B/Scop=
e.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/=
angular.js:12224:14<br>$RootScopeProvider/this.$get<=3B/Scope.prototype.$=
apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:125=
16:12<br>timeout/timeoutId<=3B@https://ajax.googleapis.com/ajax/libs/angu=
larjs/1.2.16/angular.js:14023:24<br>completeOutstandingRequest@https://ajax=
.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:4300:6<br>Browser/sel=
f.defer/timeoutId<=3B@https://ajax.googleapis.com/ajax/libs/angularjs/1.2=
.16/angular.js:4601:6<br>" } angular.js:9778<br><br><br><br><br>By the way=
=2C the server.log file on the optimizer server is in debug mode and consta=
ntly writes the following lines:<br><br><br><br>DEBUG [org.apache.http.impl=
.conn.PoolingClientConnectionManager] (Thread-76) Closing expired connectio=
ns<br>DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thr=
ead-76) Closing connections idle longer than 30 SECONDS<br><br><br>the file=
is getting very big (1GB per day) and I tried to change the log level but =
I couldn't. Can you please tell me how can I switch it?<br><br>Thanks=2C<br=
><br>Sokratis<br><br><br><br>----- Original Message -----<br>>=3B<br>>=
=3BHi=2C=0A=
>=3B=0A=
>=3BPlease check the browser's debug console for error messages. Then che=
ck the firewall and jboss configuration on the Optimizer server.=0A=
>=3B=0A=
>=3BThe JBoss log on the optimizer machine will tell you whether it does =
some computations (you will see score lines).=0A=
>=3BThen try manually connecting (telnet) to optimizer:8080 from your mac=
hine (the same where the webadmin is running). =0A=
>=3B=0A=
>=3BWe need more data to be able to give you more specific instructions.=
=0A=
>=3B=0A=
>=3B--=0A=
>=3BMartin Siv=E1k=0A=
<a href=3D"http://lists.ovirt.org/mailman/listinfo/users">>=3Bmsivak at r=
edhat.com</a>=0A=
>=3BRed Hat Czech=0A=
>=3BRHEV-M SLA / Brno=2C CZ=0A=
>=3B=0A=
----- Original Message -----=0A=
>=3B<i> What is your web browser? In my case =2C if i use the Chrome then=
the status=0A=
</i>>=3B<i> would be "Waiting for data..." forever=2C=0A=
</i>>=3B<i> but when i use Firefox then everything is ok.=0A=
</i>>=3B<i> =0A=
</i>>=3B<i> by the way=2C please make sure that you optimizer can be conn=
ected from=0A=
</i>>=3B<i> ovirt-engine firstly.=0A=
</i>>=3B<i> e.g. if you use jboss=2C you need to run the following comman=
d:=0A=
</i>>=3B<i> ./standalone.sh -b 0.0.0.0=0A=
</i>>=3B<i> if you have no -b option in your command line=2C then only lo=
calhost can access=0A=
</i>>=3B<i> the optimizer.=0A=
</i>>=3B<i> =0A=
</i>>=3B<i> =0A=
</i>>=3B<i> <a href=3D"http://lists.ovirt.org/mailman/listinfo/users">lik=
e.ma at cs2c.com.cn</a>=0A=
</i>>=3B<i> =0A=
</i>>=3B<i> =0A=
</i>>=3B<i> =0A=
</i>>=3B<i> From: s k=0A=
</i>>=3B<i> Date: 2014-11-18 16:34=0A=
</i>>=3B<i> To: Doron Fediuck=0A=
</i>>=3B<i> CC: <a href=3D"http://lists.ovirt.org/mailman/listinfo/users"=
>users at ovirt.org</a>=0A=
</i>>=3B<i> Subject: Re: [ovirt-users] Optaplanner Problem=0A=
</i>>=3B<i> Network access is working both sides and i don't see any erro=
rs in the logs.=0A=
</i>>=3B<i> You can see a screenshot of the tab in the below link:=0A=
</i>>=3B<i> =0A=
</i>>=3B<i> <a href=3D"http://picpaste.com/Optimizer_1-9UdHfclq.png">http=
://picpaste.com/Optimizer_1-9UdHfclq.png</a>=0A=
</i>>=3B<i> =0A=
</i>>=3B<i> >=3B Date: Mon=2C 17 Nov 2014 11:14:16 -0500=0A=
</i>>=3B<i> >=3B From: <a href=3D"http://lists.ovirt.org/mailman/listin=
fo/users">dfediuck at redhat.com</a>=0A=
</i>>=3B<i> >=3B To: <a href=3D"http://lists.ovirt.org/mailman/listinfo=
/users">sokratis123k at outlook.com</a>=0A=
</i>>=3B<i> >=3B CC: <a href=3D"http://lists.ovirt.org/mailman/listinfo=
/users">users at ovirt.org</a>=3B <a href=3D"http://lists.ovirt.org/mailman=
/listinfo/users">msivak at redhat.com</a>=0A=
</i>>=3B<i> >=3B Subject: Re: [ovirt-users] Optaplanner Problem=0A=
</i>>=3B<i> >=3B =0A=
</i>>=3B<i> >=3B =0A=
</i>>=3B<i> >=3B =0A=
</i>>=3B<i> >=3B ----- Original Message -----=0A=
</i>>=3B<i> >=3B >=3B From: "s k" <=3B<a href=3D"http://lists.ovirt=
.org/mailman/listinfo/users">sokratis123k at outlook.com</a>>=3B=0A=
</i>>=3B<i> >=3B >=3B To: <a href=3D"http://lists.ovirt.org/mailman/l=
istinfo/users">users at ovirt.org</a>=0A=
</i>>=3B<i> >=3B >=3B Sent: Monday=2C November 17=2C 2014 1:52:42 PM=
=0A=
</i>>=3B<i> >=3B >=3B Subject: [ovirt-users] Optaplanner Problem=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B Hello=2C=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B I upgraded oVirt to version 3.5.0 today and I a=
lso installed Optaplanner=0A=
</i>>=3B<i> >=3B >=3B in a=0A=
</i>>=3B<i> >=3B >=3B separate VM. While the installation was success=
ful the Optimizer tab in=0A=
</i>>=3B<i> >=3B >=3B oVirt Engine doesn't report the correct informa=
tion. Although there are=0A=
</i>>=3B<i> >=3B >=3B VMs=0A=
</i>>=3B<i> >=3B >=3B that are shutdown and the hosts are not balance=
d in terms of memory usage=0A=
</i>>=3B<i> >=3B >=3B the Optimized tab reports the following:=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B SOLUTION STATUS=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B Status: Waiting for data...=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B Solution is being refreshed every 30 seconds.=
=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B Freeze solution=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B VMS THAT SHOULD BE STARTED=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B No VM starts are requested at this moment.=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B MIGRATION / START STEPS=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B No migrations are needed at this moment. The st=
ate is stable.=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B TARGET STATE=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B host vm memory [all in GB]=0A=
</i>>=3B<i> >=3B >=3B used available=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B >=3B No information is displayed in TARGET STATE.=0A=
</i>>=3B<i> >=3B >=3B =0A=
</i>>=3B<i> >=3B =0A=
</i>>=3B<i> >=3B Hi=2C=0A=
</i>>=3B<i> >=3B it seems that the optimizer is not getting information=
=0A=
</i>>=3B<i> >=3B from the engine DB=2C or the UI plugin cannot connect =
the=0A=
</i>>=3B<i> >=3B Optimizer.=0A=
</i>>=3B<i> >=3B Do you see any meaningful information in the UI?=0A=
</i>>=3B<i> =0A=
</i>>=3B<i> _______________________________________________=0A=
</i>>=3B<i> Users mailing list=0A=
</i>>=3B<i> <a href=3D"http://lists.ovirt.org/mailman/listinfo/users">Use=
rs at ovirt.org</a>=0A=
</i>>=3B<i> <a href=3D"http://lists.ovirt.org/mailman/listinfo/users">htt=
p://lists.ovirt.org/mailman/listinfo/users</a>=0A=
</i>>=3B<i> </i></pre> </div></body>
</html>=
--_4acda39e-6832-4833-88a5-489ba11c0690_--
10 years, 5 months
Upgrade to Ovirt 3.5.0 Authentication Fails to IPA
by Cameron Christensen
--=-7FGTMvtERpsX2N9uBb42
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Hello,
I upgraded to ovirt 3.5.0 and can no longer authenticate to IPA.
Starting up ovrit-engine the extension manager fails to properly load
the service that handles Kerberos/LDAP.
engine.log:
...
2014-11-10 11:29:25,106 INFO
[org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (MSC service
thread 1-10) Start initializing ExecutionMessageDirector
2014-11-10 11:29:25,108 INFO
[org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (MSC service
thread 1-10) Finished initializing ExecutionMessageDirector
2014-11-10 11:29:25,145 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Loading extension 'builtin-authn-internal'
2014-11-10 11:29:25,146 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'builtin-authn-internal' loaded
2014-11-10 11:29:25,148 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Loading extension 'internal'
2014-11-10 11:29:25,150 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'internal' loaded
2014-11-10 11:29:25,154 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Loading extension 'builtin-authn-EXAMPLE.ORG'
2014-11-10 11:29:25,215 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'builtin-authn-EXAMPLE.ORG' loaded
2014-11-10 11:29:25,218 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Loading extension 'EXAMPLE.ORG'
2014-11-10 11:29:25,264 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'EXAMPLE.ORG' loaded
2014-11-10 11:29:25,265 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Initializing extension 'EXAMPLE.ORG'
2014-11-10 11:29:25,265 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'EXAMPLE.ORG' initialized
2014-11-10 11:29:25,266 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Initializing extension 'builtin-authn-internal'
2014-11-10 11:29:25,266 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'builtin-authn-internal' initialized
2014-11-10 11:29:25,267 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Initializing extension 'builtin-authn-EXAMPLE.ORG'
2014-11-10 11:29:25,267 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'builtin-authn-EXAMPLE.ORG' initialized
2014-11-10 11:29:25,268 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Initializing extension 'internal'
2014-11-10 11:29:25,268 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Extension 'internal' initialized
2014-11-10 11:29:25,268 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Start of enabled extensions list
2014-11-10 11:29:25,269 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Instance name: 'EXAMPLE.ORG', Extension name:
'Kerberos/Ldap Authz (Built-in)', Version: 'N/A', Notes: '', License:
'ASL 2.0',
Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build
interface Version: '0', File: 'N/A', Initialized: 'true'
2014-11-10 11:29:25,270 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Instance name: 'builtin-authn-internal', Extension name:
'Internal Authn (Built-in)', Version: 'N/A', Notes: '', License: 'AS
L 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build
interface Version: '0', File: 'N/A', Initialized: 'true'
2014-11-10 11:29:25,270 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Instance name: 'builtin-authn-EXAMPLE.ORG', Extension name:
'Kerberos/Ldap Authn (Built-in)', Version: 'N/A', Notes: '', Licen
se: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project',
Build interface Version: '0', File: 'N/A', Initialized: 'true'
2014-11-10 11:29:25,271 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) Instance name: 'internal', Extension name: 'Internal Authz
(Built-in)', Version: 'N/A', Notes: '', License: 'ASL 2.0', Home:
'http://www.ovirt.org', Author 'The oVirt Project', Build interface
Version: '0', File: 'N/A', Initialized: 'true'
2014-11-10 11:29:25,272 INFO
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service
thread 1-10) End of enabled extensions list
2014-11-10 11:29:25,404 INFO
[org.ovirt.engine.core.bll.aaa.DbUserCacheManager] (MSC service thread
1-10) Start initializing DbUserCacheManager
2014-11-10 11:29:25,405 INFO
[org.ovirt.engine.core.bll.aaa.DbUserCacheManager] (MSC service thread
1-10) Finished initializing DbUserCacheManager
2014-11-10 11:29:25,414 INFO
[org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (MSC service thread
1-10) Initialization of AsyncTaskManager completed successfully.
2014-11-10 11:29:25,416 INFO
[org.ovirt.engine.core.vdsbroker.ResourceManager] (MSC service thread
1-10) Start initializing ResourceManager
2014-11-10 11:29:25,458 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.LdapBrokerCommandBase=
] (DefaultQuartzScheduler_Worker-1) Failed to run command LdapSearchUserByQ=
ueryCommand. Domain is EXAMPLE.ORG. User is user1(a)EXAMPLE.ORG.
2014-11-10 11:29:25,459 ERROR [org.ovirt.engine.core.bll.aaa.SyncUsers]
(DefaultQuartzScheduler_Worker-1) Error during user synchronization of
extension EXAMPLE.ORG. Exception message is No enum constant
org.ovirt.engine.extensions.aaa.bui
ltin.kerberosldap.LDAPSecurityAuthentication.
Trying to authenticate with user2 from IPA produces this error:
engine.log:
2014-11-10 11:30:08,777 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.LdapBrokerCommandBase=
] (ajp--127.0.0.1-8702-2) Failed to run command LdapAuthenticateUserCommand=
. Domain is EXAMPLE.ORG. User is user2.
2014-11-10 11:30:08,779 ERROR
[org.ovirt.engine.core.bll.aaa.LoginAdminUserCommand]
(ajp--127.0.0.1-8702-2) Error during CanDoActionFailure.: Class: class
org.ovirt.engine.core.extensions.mgr.ExtensionInvokeCommandFailedException
Input:=20
{Extkey[name=3DAAA_AUTHN_CREDENTIALS;type=3Dclass
java.lang.String;uuid=3DAAA_AUTHN_CREDENTIALS[03b96485-4bb5-4592-8167-810a5=
c909706];]=3D***, Extkey[name=3DEXTENSION_INVOKE_CONTEXT;type=3Dclass org.o=
virt.engine.api.extensions.ExtMap;uuid=3DEXTENSION_INVOKE_CONTEXT[886d2ebb-=
312a-49ae-9cc3-e1f849834b7d];]=3D{Extkey[name=3DEXTENSION_INTERFACE_VERSION=
_MAX;type=3Dclass java.lang.Integer;uuid=3DEXTENSION_INTERFACE_VERSION_MAX[=
f4cff49f-2717-4901-8ee9-df362446e3e7];]=3D0, Extkey[name=3DEXTENSION_LICENS=
E;type=3Dclass java.lang.String;uuid=3DEXTENSION_LICENSE[8a61ad65-054c-4e31=
-9c6d-1ca4d60a4c18];]=3DASL 2.0, Extkey[name=3DEXTENSION_HOME_URL;type=3Dcl=
ass java.lang.String;uuid=3DEXTENSION_HOME_URL[4ad7a2f4-f969-42d4-b399-72d1=
92e18304];]=3Dhttp://www.ovirt.org, Extkey[name=3DEXTENSION_LOCALE;type=3Dc=
lass java.lang.String;uuid=3DEXTENSION_LOCALE[0780b112-0ce0-404a-b85e-8765d=
778bb29];]=3Den_US, Extkey[name=3DEXTENSION_NAME;type=3Dclass java.lang.Str=
ing;uuid=3DEXTENSION_NAME[651381d3-f54f-4547-bf28-b0b01a103184];]=3DKerbero=
s/Ldap Authn (Built-in), Extkey[name=3DEXTENSION_INTERFACE_VERSION_MIN;type=
=3Dclass java.lang.Integer;uuid=3DEXTENSION_INTERFACE_VERSION_MIN[2b84fc91-=
305b-497b-a1d7-d961b9d2ce0b];]=3D0, Extkey[name=3DEXTENSION_CONFIGURATION;t=
ype=3Dclass java.util.Properties;uuid=3DEXTENSION_CONFIGURATION[2d48ab72-f0=
a1-4312-b4ae-5068a226b0fc];]=3D***, Extkey[name=3DEXTENSION_AUTHOR;type=3Dc=
lass java.lang.String;uuid=3DEXTENSION_AUTHOR[ef242f7a-2dad-4bc5-9aad-e0701=
8b7fbcc];]=3DThe oVirt Project, Extkey[name=3DEXTENSION_INSTANCE_NAME;type=
=3Dclass java.lang.String;uuid=3DEXTENSION_INSTANCE_NAME[65c67ff6-aeca-4bd5=
-a245-8674327f011b];]=3Dbuiltin-authn-EXAMPLE.ORG, Extkey[name=3DEXTENSION_=
BUILD_INTERFACE_VERSION;type=3Dclass java.lang.Integer;uuid=3DEXTENSION_BUI=
LD_INTERFACE_VERSION[cb479e5a-4b23-46f8-aed3-56a4747a8ab7];]=3D0, Extkey[na=
me=3DEXTENSION_CONFIGURATION_SENSITIVE_KEYS;type=3Dinterface java.util.Coll=
ection;uuid=3DEXTENSION_CONFIGURATION_SENSITIVE_KEYS[a456efa1-73ff-4204-9f9=
b-ebff01e35263];]=3D[, config.authn.user.password], Extkey[name=3DAAA_AUTHN=
_CAPABILITIES;type=3Dclass java.lang.Long;uuid=3DAAA_AUTHN_CAPABILITIES[9d1=
6bee3-10fd-46f2-83f9-3d3c54cf258d];]=3D12, Extkey[name=3DEXTENSION_GLOBAL_C=
ONTEXT;type=3Dclass org.ovirt.engine.api.extensions.ExtMap;uuid=3DEXTENSION=
_GLOBAL_CONTEXT[9799e72f-7af6-4cf1-bf08-297bc8903676];]=3D*skip*, Extkey[na=
me=3DEXTENSION_VERSION;type=3Dclass java.lang.String;uuid=3DEXTENSION_VERSI=
ON[fe35f6a8-8239-4bdb-ab1a-af9f779ce68c];]=3DN/A, Extkey[name=3DEXTENSION_M=
ANAGER_TRACE_LOG;type=3Dinterface org.slf4j.Logger;uuid=3DEXTENSION_MANAGER=
_TRACE_LOG[863db666-3ea7-4751-9695-918a3197ad83];]=3Dorg.slf4j.impl.Slf4jLo=
gger(org.ovirt.engine.core.extensions.mgr.ExtensionsManager.trace.Kerberos/=
Ldap Authn (Built-in).builtin-authn-EXAMPLE.ORG), Extkey[name=3DEXTENSION_P=
ROVIDES;type=3Dinterface java.util.Collection;uuid=3DEXTENSION_PROVIDES[8cf=
373a6-65b5-4594-b828-0e275087de91];]=3D[org.ovirt.engine.api.extensions.aaa=
.Authn]}, Extkey[name=3DAAA_AUTHN_USER;type=3Dclass java.lang.String;uuid=
=3DAAA_AUTHN_USER[1ceaba26-1bdc-4663-a3c6-5d926f9dd8f0];]=3Duser2, Extkey[n=
ame=3DEXTENSION_INVOKE_COMMAND;type=3Dclass org.ovirt.engine.api.extensions=
.ExtUUID;uuid=3DEXTENSION_INVOKE_COMMAND[485778ab-bede-4f1a-b823-77b262a2f2=
8d];]=3DAAA_AUTHN_AUTHENTICATE_CREDENTIALS[d9605c75-6b43-4b00-b32c-06bdfa80=
244c]}
Output:
{Extkey[name=3DEXTENSION_INVOKE_RESULT;type=3Dclass
java.lang.Integer;uuid=3DEXTENSION_INVOKE_RESULT[0909d91d-8bde-40fb-b6c0-09=
9c772ddd4e];]=3D2, Extkey[name=3DEXTENSION_INVOKE_MESSAGE;type=3Dclass java=
.lang.String;uuid=3DEXTENSION_INVOKE_MESSAGE[b7b053de-dc73-4bf7-9d26-b8bdb7=
2f5893];]=3DNo enum constant org.ovirt.engine.extensions.aaa.builtin.kerber=
osldap.LDAPSecurityAuthentication.}
engine-manage-domains shows the IPA domain but I cannot delete the
domain or edit it.
# engine-manage-domains list
Domain: EXAMPLE.ORG
User name: null
Manage Domains completed successfully
# engine-manage-domains delete --domain=3DEXAMPLE.ORG
Domain example.org doesn't exist in the configuration.
Any ideas on fixing?
Regards,
Cameron
--=-7FGTMvtERpsX2N9uBb42
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJUZiJKAAoJEM1PCzopIAOtj+4IAKqqzUwJopm2lptCLicVzS3O
2rdWqgA6XGTr7b0NOHRNyFk6dxgcw0Au9Nf5RMykpiw3GKxDAQ64BKvNmxncGSL2
HudZ/+iTtwFsgxU87jGOYD/l9Gq9uaxheH8VdkwY6R4sCCUGLmM9oDo33TYz2k/a
my+m7CsBYdfzJFRrcNdHcaRWFtJ9GKxiuUyCPhAPYRHW1Z86EZk1BbVb6gr/hyTG
56NZAgPa5nCBXchdETm+60JVwc3G/PY/Txo0oUxpd9CrBPLpxe45jojWSZuFAtk4
FX2gw0sNMo1CCaKOXumnJONF5pVpmcPH6VVZDtnPhs7Jbk5ntNpg2urqkejOR+M=
=SDGw
-----END PGP SIGNATURE-----
--=-7FGTMvtERpsX2N9uBb42--
10 years, 5 months
[QE][ACTION NEEDED] oVirt 3.5.1 RC status - branching
by Sandro Bonazzola
Hi,
We're going to start composing oVirt 3.5.1 RC on *2014-11-25 08:00 UTC* from 3.5 branch.
In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC.
Maintainers:
- Please be sure that 3.5 snapshot allow to create VMs before *2014-11-24 15:00 UTC*
- Please be sure that no pending patches are going to block the release before *2014-11-24 15:00 UTC*
- If any patch must block the RC release please raise the issue as soon as possible.
A bug tracker [1] has been opened and shows 2 open blocker:
Bug ID Whiteboard Status Summary
1164218 POST glfs_set_volfile_server() method causes segmentation fault when bad arguments are passed.
1159839 storage POST New FC LUNs are not detected on hypervisor without a reboot
1162640 gluster POST supervdsm segfault in libgfapi while querying volume status detail
1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile
The following bugs have been keyworded as Regression and not marked as blockers:
Bug ID Whiteboard Status Summary
1162640 gluster POST supervdsm segfault in libgfapi while querying volume status detail
1164215 infra NEW vdsm sos plugin doesn't work
1159314 sla NEW Error accessing ha metadata while deploying second host
1138144 storage NEW [BLOCKED]Failed to autorecover storage domain after unblocking connection with host
1118349 storage NEW [vdsm] Creating DataCenter 3.5 using master domain V1 fails with InquireNotSupportedError
There are still 150 bugs [2] targeted to 3.5.1.
Excluding node and documentation bugs we still have 123 bugs [3] targeted to 3.5.1.
Maintainers / Assignee:
- Please review bugs marked as Regression and add to blocker if they're real regressions.
- Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed.
- Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1:
it will ease gathering the blocking bugs for next releases.
- Please fill release notes, the page has been created here [4]
Community:
- If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5]
[1] http://bugzilla.redhat.com/1155170
[2] http://goo.gl/7G0PDV
[3] http://goo.gl/6gUbVr
[4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes
[5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 5 months
Engine is still unreachable
by Sandvik Agustin
Hi!,
I have install ovirt 3.4 on centos 6.6 following this documentation
http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
I have already completed the installation of ovirt engine inside of the vm,
when going back to hosted-engine --deploy terminal and choosing 1 the
hosted-engine
--deploy says:
(1, 2, 3)[1]: 1
[ ERROR ] Engine is still unreachable
Engine health status page is not yet reachable.
To continue make a selection from the options below:
(1) Continue setup - engine installation is complete
(2) Power off and restart the VM
(3) Abort setup
what should I do? how to fix this?
Thanks in advance,
sandvik
10 years, 5 months
Recommendations for Storage Pool sizes
by Groten, Ryan
--_000_61A8344D117D814CA4DA393472F38CF4019BEC6D4ACD1001M360cor_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
I've been looking around for any best practices/recommendations on how larg=
e a storage domain can be but can't seem to find anything.
For example, right now I have a 3TB domain made up of 3 1TB luns. That dom=
ain has about 200 thin disks created from it.
When I want to add more space, is there any reason I should not simply incr=
ease the existing pool? Or is it better to create a new pool?
Thanks,
Ryan
--_000_61A8344D117D814CA4DA393472F38CF4019BEC6D4ACD1001M360cor_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:dt=3D"uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:m=3D"http://sc=
hemas.microsoft.com/office/2004/12/omml" xmlns=3D"http://www.w3.org/TR/REC-=
html40"><head><META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; chars=
et=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 14 (filtere=
d medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Century Gothic";
panose-1:2 11 5 2 2 2 2 2 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Century Gothic","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";
mso-fareast-language:EN-US;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DEN-CA link=3Dblue vli=
nk=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span style=3D'f=
ont-size:10.0pt;font-family:"Century Gothic","sans-serif"'>I’ve been =
looking around for any best practices/recommendations on how large a storag=
e domain can be but can’t seem to find anything.<o:p></o:p></span></p=
><p class=3DMsoNormal><span style=3D'font-size:10.0pt;font-family:"Century =
Gothic","sans-serif"'><o:p> </o:p></span></p><p class=3DMsoNormal><spa=
n style=3D'font-size:10.0pt;font-family:"Century Gothic","sans-serif"'>For =
example, right now I have a 3TB domain made up of 3 1TB luns. That do=
main has about 200 thin disks created from it.<o:p></o:p></span></p><p clas=
s=3DMsoNormal><span style=3D'font-size:10.0pt;font-family:"Century Gothic",=
"sans-serif"'><o:p> </o:p></span></p><p class=3DMsoNormal><span style=
=3D'font-size:10.0pt;font-family:"Century Gothic","sans-serif"'>When I want=
to add more space, is there any reason I should not simply increase the ex=
isting pool? Or is it better to create a new pool?<o:p></o:p></span><=
/p><p class=3DMsoNormal><span style=3D'font-size:10.0pt;font-family:"Centur=
y Gothic","sans-serif"'><o:p> </o:p></span></p><p class=3DMsoNormal><s=
pan style=3D'font-size:10.0pt;font-family:"Century Gothic","sans-serif"'>Th=
anks,<o:p></o:p></span></p><p class=3DMsoNormal><span style=3D'font-size:10=
.0pt;font-family:"Century Gothic","sans-serif"'>Ryan<o:p></o:p></span></p><=
p class=3DMsoNormal><span style=3D'font-size:10.0pt;font-family:"Century Go=
thic","sans-serif"'><o:p> </o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:10.0pt;font-family:"Century Gothic","sans-serif"'><o:p>&=
nbsp;</o:p></span></p></div></body></html>=
--_000_61A8344D117D814CA4DA393472F38CF4019BEC6D4ACD1001M360cor_--
10 years, 5 months
Ubuntu/Debian support?
by Itamar Heim
So, a quick non-scientific poll...
Motivation: It has been suggested that adding ubuntu or debian distro
support could broaden the reach of the oVirt community.
To date, there has been some work towards this goal, but it is not
"coming to a conclusion".
Questions that comes to mind:
1) Is this still an issue?
2) Can we afford to dilute the focus we have as it is hard enough to
stabilize the currently supported distro's? is it worth the
potential impact?
3) Would it have maintainers catering to it so it won't be left behind
/ delay development?
4) Why bother with host support, ovirt-node can be used?
5) Why bother with engine support, a virtual appliance or a docker
image could be used?
6) if we do it, should we focus on Ubuntu or Debian distro first?
7) if we do it, should we focus on host or engine first?
Thoughts?
Thanks,
Itamar
10 years, 5 months
separate ovirtmgmt from glusterfs traffic
by Demeter Tibor
------=_Part_2135316_487269704.1415878900070
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Hi,
I have a 3 node gluster based cluster. There are 3x3 Nic with bonding. Sometimes the management is very slow because high gluster traffic.
Is it possible to separate ovirtmgmt network from glusterfs traffic?
I have only one interface (ovirtmgmt) for all of services (migration, etc).
I just wondering I will make three VLANs for these services and use the QoS function. But how can specify glusterfs for use an other vlan for gluster traffic an a other one for management?
Also, I have more questions about this:
- If I specify a VLAN on ovirtmgmt, then what happend on nodes? I'm afraid the nodes will lost the connection with each other nodes.
- Is it possible on a live system? What will happen with the mounted glustefs based datastores?
- What does "vm network" mean on ovirtmgmt interface? Can I use this for seperate network traffic?
My plan is
- vlan.101 ovirtmgmt
- vlan 102 glusterfs
- vlan 103 migration
- vlan 104 display
What is the recommended procedure of this?
Thanks in advance,
Regards,
Tibor
------=_Part_2135316_487269704.1415878900070
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: times new roman, new york, times, se=
rif; font-size: 12pt; color: #000000"><div>Hi,</div><div><br></div><div>I h=
ave a 3 node gluster based cluster. There are 3x3 Nic with bonding. Sometim=
es the management is very slow because high gluster traffic. </div><di=
v><br></div><div>Is it possible to separate ovirtmgmt network from glusterf=
s traffic?</div><div>I have only one interface (ovirtmgmt) for all of servi=
ces (migration, etc).</div><div>I just wondering I will make three VLANs fo=
r these services and use the QoS function. But how can specify glusterfs fo=
r use an other vlan for gluster traffic an a other one for management? =
;</div><div>Also, I have more questions about this:</div><div><br></div><di=
v>- If I specify a VLAN on ovirtmgmt, then what happend on nodes? I'm afrai=
d the nodes will lost the connection with each other nodes.</div><div>- Is =
it possible on a live system? What will happen with the mounted glustefs ba=
sed datastores?</div><div>- What does "vm network" mean on ovirtmgmt interf=
ace? Can I use this for seperate network traffic?</div><div><br></div><div>=
<br></div><div>My plan is </div><div>- vlan.101 ovirtmgmt</div><div>- =
vlan 102 glusterfs</div><div>- vlan 103 migration</div><div>- vlan 104 disp=
lay</div><div><br></div><div>What is the recommended procedure of this?&nbs=
p;</div><div><br></div><div>Thanks in advance,</div><div><br></div><div>Reg=
ards,</div><div><br></div><div>Tibor</div><div><br></div><div><br></div></d=
iv></body></html>
------=_Part_2135316_487269704.1415878900070--
10 years, 5 months
Optaplanner Problem
by s k
--_d447f566-9b4b-4058-b5e2-f041e4e7bf42_
Content-Type: text/plain; charset="iso-8859-7"
Content-Transfer-Encoding: quoted-printable
Hello=2C
I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in=
a separate VM. While the installation was successful the Optimizer tab in =
oVirt Engine doesn't report the correct information. Although there are VMs=
that are shutdown and the hosts are not balanced in terms of memory usage =
the Optimized tab reports the following:
SOLUTION STATUS
Status: Waiting for data...
Solution is being refreshed every 30 seconds.
Freeze solution
VMS THAT SHOULD BE STARTED
No VM starts are requested at this moment.
MIGRATION / START STEPS
No migrations are needed at this moment. The state is stable.
TARGET STATE
host vm memory [all in GB] used available =20
No information is displayed in TARGET STATE. =
--_d447f566-9b4b-4058-b5e2-f041e4e7bf42_
Content-Type: text/html; charset="iso-8859-7"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>Hello=2C<div><br></div><div><br>=
</div><div>I upgraded oVirt to version 3.5.0 today and I also installed Opt=
aplanner in a separate VM. While the installation was successful the Optimi=
zer tab in oVirt Engine doesn't report the correct information. Although th=
ere are VMs that are shutdown and the hosts are not balanced in terms of me=
mory usage the Optimized tab reports the following:</div><div><br></div><di=
v><br></div><div><div>SOLUTION STATUS</div><div><br></div><div> =3BStat=
us: Waiting for data...</div><div><br></div><div> =3BSolution is being =
refreshed every 30 seconds.</div><div><br></div><div> =3BFreeze solutio=
n</div><div><br></div><div>VMS THAT SHOULD BE STARTED</div><div><br></div><=
div>No VM starts are requested at this moment.</div><div><br></div><div>MIG=
RATION / START STEPS</div><div><br></div><div>No migrations are needed at t=
his moment. The state is stable.</div><div><br></div><div>TARGET STATE</div=
><div><br></div><div>host<span class=3D"Apple-tab-span" style=3D"white-spac=
e:pre"> </span>vm<span class=3D"Apple-tab-span" style=3D"white-space:pre"> =
</span>memory [all in GB]<span class=3D"Apple-tab-span" style=3D"white-spac=
e:pre"> </span> =3B</div><div> =3B<span class=3D"Apple-tab-span" st=
yle=3D"white-space:pre"> </span> <span class=3D"Apple-tab-span" style=3D"wh=
ite-space:pre"> </span>used<span class=3D"Apple-tab-span" style=3D"white-sp=
ace:pre"> </span>available<span class=3D"Apple-tab-span" style=3D"white-spa=
ce:pre"> </span> =3B</div></div><div><br></div><div><br></div><div><br>=
</div><div>No information is displayed in TARGET STATE.</div> </=
div></body>
</html>=
--_d447f566-9b4b-4058-b5e2-f041e4e7bf42_--
10 years, 5 months
iptables management
by Chris Adams
During setup, I allowed the script to change iptables rules. Is this
necessary? Also, is it an "active" management (where oVirt will make
changes), or just a one-time thing?
I ask because I have some other iptables setup I want (such as limited
SSH access), and I don't want to make changes to iptables that oVirt
will override later or anything like that.
--
Chris Adams <cma(a)cmadams.net>
10 years, 5 months
Re: [ovirt-users] Fake power management?
by mots
------=_Part_31_861888835.1416222010953
Content-Type: multipart/alternative;
boundary="=_cjtqlQp4QSYnJhuKs0Xg4VLTs9O15oco497qtVs9HKP3duB5"
This is a multi-part message in MIME format. Your mail reader does not
understand MIME message format.
--=_cjtqlQp4QSYnJhuKs0Xg4VLTs9O15oco497qtVs9HKP3duB5
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Yes, pacemaker manages the engine. That part is working fine, the engine =
restarts on the remaining node without problems.=20=0D=0AIt's just that t=
he guests don't come back up until the powered down node has been fenced =
manually.=0D=0A=0D=0A-----Urspr=C3=BCngliche Nachricht-----=0D=0A> Von:Ba=
rak Azulay <bazulay(a)redhat.com <mailto:bazulay@redhat.com> >=0D=0A> Gesen=
det: Mon 17 November 2014 11:35=0D=0A> An: Patrick Lottenbach <pl(a)a-bot.c=
h <mailto:pl@a-bot.ch> >=0D=0A> CC: users(a)ovirt.org <mailto:users@ovirt.o=
rg>=20=0D=0A> Betreff: Re: [ovirt-users] Fake power management=3F=0D=0A>=20=
=0D=0A>=20=0D=0A>=20=0D=0A> ----- Original Message -----=0D=0A> > From: "=
mots" <mots(a)nepu.moe <mailto:mots@nepu.moe> >=0D=0A> > To: users(a)ovirt.or=
g <mailto:users@ovirt.org>=20=0D=0A> > Sent: Friday, November 14, 2014 4:=
54:08 PM=0D=0A> > Subject: [ovirt-users] Fake power management=3F=0D=0A> =
>=20=0D=0A> > Fake power management=3F Hello,=0D=0A> >=20=0D=0A> > I'm bu=
ilding a small demonstration system for our sales team to take to a=0D=0A=
> > customer so that they can show them our solutions.=0D=0A> > Hardware:=
Two Intel NUC's, a 4 port switch and a laptop.=0D=0A> > Engine: Runs as =
a VM on one of the NUCs, which one it runs on is determined=0D=0A> > by p=
acemaker.=0D=0A> > Storage: Also managed by pacemaker, it's drbd backed a=
nd accessed with iscsi.=0D=0A> > oVirt version: 3.5=0D=0A> > OS: CentOS 6=
=2E6=0D=0A> >=20=0D=0A> > The idea is to have our sales representative (o=
r the potential customer=0D=0A> > himself) randomly pull the plug on one =
of the NUCs to show that the system=0D=0A> > stays operational when part =
of the hardware fails.=0D=0A>=20=0D=0A> I assume you are aware that the e=
ngine might fence the node it is running on ...=20=0D=0A> Or do you use p=
acemaker to run the engine as well =3F=0D=0A>=20=0D=0A> > My problem is t=
hat I don't have any way to implement power management, so the=0D=0A> > E=
ngine can't fence nodes and won't restart guests that were running on the=
=0D=0A> > node which lost power. In pacemaker I can just configure fencin=
g over SSH or=0D=0A> > even disable the requirement to do so completely. =
Is there something similar=0D=0A> > for oVirt, so that the Engine will co=
nsider a node which it can't connect to=0D=0A> > to be powered down=3F=0D=
=0A> >=20=0D=0A> > Regards,=0D=0A> >=20=0D=0A> > mots=0D=0A> >=20=0D=0A> =
> _______________________________________________=0D=0A> > Users mailing =
list=0D=0A> > Users(a)ovirt.org <mailto:Users@ovirt.org>=20=0D=0A> > http:/=
/lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/l=
istinfo/users>=20=0D=0A> >=20=0D=0A>=20=0D=0A=0D=0A
--=_cjtqlQp4QSYnJhuKs0Xg4VLTs9O15oco497qtVs9HKP3duB5
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://ww=
w.w3.org/TR/html4/loose.dtd"><html>=0A<head>=0A <meta name=3D"Generator"=
content=3D"Zarafa WebApp v7.1.10-44973">=0A <meta http-equiv=3D"Content=
-Type" content=3D"text/html; charset=3Dutf-8">=0A <title>AW: [ovirt-user=
s] Fake power management=3F</title>=0A</head>=0A<body>=0A<font face=3D"ta=
homa" size=3D"2">Yes, pacemaker manages the engine. That part is working =
fine, the engine restarts on the remaining node without problems. <br>It'=
s just that the guests don't come back up until the powered down node has=
been fenced manually.</font><br><pre style=3D"white-space: -moz-pre-wrap=
; white-space: -pre-wrap; white-space: -o-pre-wrap; white-space: pre-wrap=
; word-wrap: break-word;" wrap=3D"">-----Urspr=C3=BCngliche Nachricht----=
-<br>> Von:Barak Azulay <<a href=3D"mailto:bazulay@redhat.com">bazu=
lay(a)redhat.com</a>><br>> Gesendet: Mon 17 November 2014 11:35<br>&g=
t; An: Patrick Lottenbach <<a href=3D"mailto:pl@a-bot.ch">pl(a)a-bot.ch<=
/a>><br>> CC: <a href=3D"mailto:users@ovirt.org">users(a)ovirt.org</a=
><br>> Betreff: Re: [ovirt-users] Fake power management=3F<br>> <br=
>> <br>> <br>> ----- Original Message -----<br>> > From: "=
mots" <<a href=3D"mailto:mots@nepu.moe">mots(a)nepu.moe</a>><br>> =
> To: <a href=3D"mailto:users@ovirt.org">users(a)ovirt.org</a><br>> &=
gt; Sent: Friday, November 14, 2014 4:54:08 PM<br>> > Subject: [ovi=
rt-users] Fake power management=3F<br>> > <br>> > Fake power =
management=3F Hello,<br>> > <br>> > I'm building a small demo=
nstration system for our sales team to take to a<br>> > customer so=
that they can show them our solutions.<br>> > Hardware: Two Intel =
NUC's, a 4 port switch and a laptop.<br>> > Engine: Runs as a VM on=
one of the NUCs, which one it runs on is determined<br>> > by pace=
maker.<br>> > Storage: Also managed by pacemaker, it's drbd backed =
and accessed with iscsi.<br>> > oVirt version: 3.5<br>> > OS:=
CentOS 6.6<br>> > <br>> > The idea is to have our sales repr=
esentative (or the potential customer<br>> > himself) randomly pull=
the plug on one of the NUCs to show that the system<br>> > stays o=
perational when part of the hardware fails.<br>> <br>> I assume you=
are aware that the engine might fence the node it is running on ... <br>=
> Or do you use pacemaker to run the engine as well =3F<br>> <br>&g=
t; > My problem is that I don't have any way to implement power manage=
ment, so the<br>> > Engine can't fence nodes and won't restart gues=
ts that were running on the<br>> > node which lost power. In pacema=
ker I can just configure fencing over SSH or<br>> > even disable th=
e requirement to do so completely. Is there something similar<br>> >=
; for oVirt, so that the Engine will consider a node which it can't conne=
ct to<br>> > to be powered down=3F<br>> > <br>> > Regar=
ds,<br>> > <br>> > mots<br>> > <br>> > __________=
_____________________________________<br>> > Users mailing list<br>=
> > <a href=3D"mailto:Users@ovirt.org">Users(a)ovirt.org</a><br>> =
> <a href=3D"http://lists.ovirt.org/mailman/listinfo/users" target=3D"=
_blank">http://lists.ovirt.org/mailman/listinfo/users</a><br>> > <b=
r>> </pre>=0A</body>=0A</html>
--=_cjtqlQp4QSYnJhuKs0Xg4VLTs9O15oco497qtVs9HKP3duB5--
------=_Part_31_861888835.1416222010953
Content-Type: application/pgp-signature; name=signature.asc
Content-Transfer-Encoding: 7bit
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----
Version: CIPHERMAIL (2.8.6-4)
iQEcBAEBCAAGBQJUadU6AAoJELfzdzVzTtoKVGUH/2KQF6ZTNH7DpnXmG7K4wo9c
nB924coImSQfGkFJjvIisRSG6vTnwk+z0uFjptulLl4o3NoPaDLs0IlvjpSvyGwf
zFXLbOOls/SBVKOY5Nx7iAjEwIH4DXe06v2dYwJngQGnuyQv7pMDNUAz4uMXCup8
QjV39XbOYXQoLIfHUcGOJB824f2+LgRTrDr4HdZcyE0SHUfJaque3jdCDveXZFkB
d0c0RKgB/r8wYBz+T7zIfutxtvKHYp1P5WmpbQ1J1Fr8XZKWgC7l3f7ubJyeldvK
wyqZqokR+s1yptnUfLJUJEthnqFK0l+Fq2Vm9vuVpZsvwcn5QgQg+Kn1hmWCT7A=
=qpmj
-----END PGP SIGNATURE-----
------=_Part_31_861888835.1416222010953--
10 years, 5 months
ovirt local datacenter/cluster using zfs local storage for storage domain?
by Mathew Gancarz
--_000_EE5DB373DE433D4A87A60EE0284C92F926421EFDRISXMBX03adsuhn_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hello all,
I'm exploring using oVirt 3.5 as the management engine for a new cluster I =
am building. I don't really need high availability and I have 3 servers wit=
h fast SSDs on local storage I'd like to use, preferably using ZFS to ensur=
e reliability of the storage.
I set up a brand new CentOS 6.6 minimal install and have been able to get o=
Virt up using the all-in-one plugin. I can use local storage (the default E=
XT4 LVM filesystem CentOS sets up) to setup a local data center for each of=
the servers but have run into issues when I try to provision a ZFS filesys=
tem as a local storage domain. I'm using ZFS on Linux 0.6.3.
I first had multipath.conf issues, which prevented me from even setting up =
a zpool using the local disks. After blacklisting the local disks in /etc/m=
ultipath.conf, I was able to get zfs up and running and create the local do=
mains, but I get errors when I try to create a storage Domain of type: Data=
/ Local on Host and point at the ZFS path (/vmstore/isos) (PS: I'm not try=
ing to create an ISO domain, it's just a directory name isos)
The error message that comes up is "Error while executing action New Local =
Storage Domain: Storage Domain target is unsupported".
Has anyone tried this before? I am able to set up an NFS export of the ZFS =
folder as a Storage Domain (using directions here: http://virt.guru/2014/02=
/25/installing-ovirt-with-shared-local-storage/) but if possible, I'd like =
to skip the NFS layer if I can and just go directly to the hardware.
The supervdsm.log shows:
MainProcess|Thread-1734::DEBUG::2014-11-17 15:50:31,350::supervdsmServer::1=
01::SuperVdsm.ServerCallback::(wrapper) call validateAccess with ('qemu', (=
'qemu', 'kvm'), u'/vmstore/isos', 5) {}
MainProcess|Thread-1734::DEBUG::2014-11-17 15:50:31,356::supervdsmServer::1=
08::SuperVdsm.ServerCallback::(wrapper) return validateAccess with None
MainProcess|Thread-1735::DEBUG::2014-11-17 15:50:31,436::supervdsmServer::1=
01::SuperVdsm.ServerCallback::(wrapper) call validateAccess with ('qemu', (=
'qemu', 'kvm'), u'/vmstore/isos', 5) {}
MainProcess|Thread-1735::DEBUG::2014-11-17 15:50:31,441::supervdsmServer::1=
08::SuperVdsm.ServerCallback::(wrapper) return validateAccess with None
MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:31,519::supervdsmServer::1=
01::SuperVdsm.ServerCallback::(wrapper) call hbaRescan with () {}
MainProcess|Thread-1736::INFO::2014-11-17 15:50:31,520::hba::54::Storage.HB=
A::(rescan) Rescanning HBAs
MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:31,520::supervdsmServer::1=
08::SuperVdsm.ServerCallback::(wrapper) return hbaRescan with None
MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:32,100::supervdsmServer::1=
01::SuperVdsm.ServerCallback::(wrapper) call validateAccess with ('qemu', (=
'qemu', 'kvm'), u'/rhev/data-center/mnt/_vmstore_isos', 5) {}
MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:32,105::supervdsmServer::1=
08::SuperVdsm.ServerCallback::(wrapper) return validateAccess with None
MainProcess|Thread-1744::DEBUG::2014-11-17 15:50:32,278::supervdsmServer::1=
01::SuperVdsm.ServerCallback::(wrapper) call hbaRescan with () {}
MainProcess|Thread-1744::INFO::2014-11-17 15:50:32,279::hba::54::Storage.HB=
A::(rescan) Rescanning HBAs
MainProcess|Thread-1744::DEBUG::2014-11-17 15:50:32,279::supervdsmServer::1=
08::SuperVdsm.ServerCallback::(wrapper) return hbaRescan with None
And the vdsm.log shows:
Thread-1732::DEBUG::2014-11-17 15:50:31,032::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`82d29b1b-0c33-4078-887b-476d95f4b1a1`::moving=
from state init -> state preparing
Thread-1732::INFO::2014-11-17 15:50:31,032::logUtils::44::dispatcher::(wrap=
per) Run and protect: repoStats(options=3DNone)
Thread-1732::INFO::2014-11-17 15:50:31,033::logUtils::47::dispatcher::(wrap=
per) Run and protect: repoStats, Return response: {u'158ef830-da69-48b4-95b=
0-3615d6fb5b00': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.00=
0627117', 'lastCheck': '8.2', 'valid': True}}
Thread-1732::DEBUG::2014-11-17 15:50:31,033::task::1191::Storage.TaskManage=
r.Task::(prepare) Task=3D`82d29b1b-0c33-4078-887b-476d95f4b1a1`::finished: =
{u'158ef830-da69-48b4-95b0-3615d6fb5b00': {'code': 0, 'version': 3, 'acquir=
ed': True, 'delay': '0.000627117', 'lastCheck': '8.2', 'valid': True}}
Thread-1732::DEBUG::2014-11-17 15:50:31,033::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`82d29b1b-0c33-4078-887b-476d95f4b1a1`::moving=
from state preparing -> state finished
Thread-1732::DEBUG::2014-11-17 15:50:31,034::resourceManager::940::Storage.=
ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources =
{}
Thread-1732::DEBUG::2014-11-17 15:50:31,034::resourceManager::977::Storage.=
ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {}
Thread-1732::DEBUG::2014-11-17 15:50:31,034::task::993::Storage.TaskManager=
.Task::(_decref) Task=3D`82d29b1b-0c33-4078-887b-476d95f4b1a1`::ref 0 abort=
ing False
Thread-1732::DEBUG::2014-11-17 15:50:31,042::stompReactor::163::yajsonrpc.S=
tompServer::(send) Sending response
JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,060::stompReactor::98::B=
roker.StompAdapter::(handle_frame) Handling message <StompFrame command=3D'=
SEND'>
JsonRpcServer::DEBUG::2014-11-17 15:50:31,062::__init__::504::jsonrpc.JsonR=
pcServer::(serve_requests) Waiting for request
Thread-1733::DEBUG::2014-11-17 15:50:31,066::stompReactor::163::yajsonrpc.S=
tompServer::(send) Sending response
JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,338::stompReactor::98::B=
roker.StompAdapter::(handle_frame) Handling message <StompFrame command=3D'=
SEND'>
JsonRpcServer::DEBUG::2014-11-17 15:50:31,341::__init__::504::jsonrpc.JsonR=
pcServer::(serve_requests) Waiting for request
Thread-1734::DEBUG::2014-11-17 15:50:31,341::__init__::467::jsonrpc.JsonRpc=
Server::(_serveRequest) Calling 'StoragePool.connectStorageServer' in bridg=
e with {u'connectionParams': [{u'id': u'00000000-0000-0000-0000-00000000000=
0', u'connection': u'/vmstore/isos', u'iqn': u'', u'user': u'', u'tpgt': u'=
1', u'password': u'', u'port': u''}], u'storagepoolID': u'00000000-0000-000=
0-0000-000000000000', u'domainType': 4}
Thread-1734::DEBUG::2014-11-17 15:50:31,344::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`4088bef4-489c-41a4-bcd4-d5f1906378b9`::moving=
from state init -> state preparing
Thread-1734::INFO::2014-11-17 15:50:31,345::logUtils::44::dispatcher::(wrap=
per) Run and protect: connectStorageServer(domType=3D4, spUUID=3Du'00000000=
-0000-0000-0000-000000000000', conList=3D[{u'connection': u'/vmstore/isos',=
u'iqn': u'', u'user': u'', u'tpgt': u'1', u'password': '******', u'id': u'=
00000000-0000-0000-0000-000000000000', u'port': u''}], options=3DNone)
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,346::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,346::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,347::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,347::__init__::3=
75::IOProcess::(_processLogs) (2321) Got request for method 'access'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,347::__init__::3=
75::IOProcess::(_processLogs) (2321) Queuing response
Thread-1734::DEBUG::2014-11-17 15:50:31,357::hsm::2389::Storage.HSM::(__pre=
fetchDomains) local _path: /vmstore/isos
Thread-1734::DEBUG::2014-11-17 15:50:31,358::hsm::2396::Storage.HSM::(__pre=
fetchDomains) Found SD uuids: ()
Thread-1734::DEBUG::2014-11-17 15:50:31,358::hsm::2452::Storage.HSM::(conne=
ctStorageServer) knownSDs: {158ef830-da69-48b4-95b0-3615d6fb5b00: storage.l=
ocalFsSD.findDomain, ac821c1f-b7ca-4534-a10f-9b98c325a070: storage.nfsSD.fi=
ndDomain}
Thread-1734::INFO::2014-11-17 15:50:31,358::logUtils::47::dispatcher::(wrap=
per) Run and protect: connectStorageServer, Return response: {'statuslist':=
[{'status': 0, 'id': u'00000000-0000-0000-0000-000000000000'}]}
Thread-1734::DEBUG::2014-11-17 15:50:31,359::task::1191::Storage.TaskManage=
r.Task::(prepare) Task=3D`4088bef4-489c-41a4-bcd4-d5f1906378b9`::finished: =
{'statuslist': [{'status': 0, 'id': u'00000000-0000-0000-0000-000000000000'=
}]}
Thread-1734::DEBUG::2014-11-17 15:50:31,359::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`4088bef4-489c-41a4-bcd4-d5f1906378b9`::moving=
from state preparing -> state finished
Thread-1734::DEBUG::2014-11-17 15:50:31,359::resourceManager::940::Storage.=
ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources =
{}
Thread-1734::DEBUG::2014-11-17 15:50:31,359::resourceManager::977::Storage.=
ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {}
Thread-1734::DEBUG::2014-11-17 15:50:31,360::task::993::Storage.TaskManager=
.Task::(_decref) Task=3D`4088bef4-489c-41a4-bcd4-d5f1906378b9`::ref 0 abort=
ing False
Thread-1734::DEBUG::2014-11-17 15:50:31,360::__init__::498::jsonrpc.JsonRpc=
Server::(_serveRequest) Return 'StoragePool.connectStorageServer' in bridge=
with [{'status': 0, 'id': u'00000000-0000-0000-0000-000000000000'}]
Thread-1734::DEBUG::2014-11-17 15:50:31,361::stompReactor::163::yajsonrpc.S=
tompServer::(send) Sending response
JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,425::stompReactor::98::B=
roker.StompAdapter::(handle_frame) Handling message <StompFrame command=3D'=
SEND'>
JsonRpcServer::DEBUG::2014-11-17 15:50:31,428::__init__::504::jsonrpc.JsonR=
pcServer::(serve_requests) Waiting for request
Thread-1735::DEBUG::2014-11-17 15:50:31,428::__init__::467::jsonrpc.JsonRpc=
Server::(_serveRequest) Calling 'StoragePool.connectStorageServer' in bridg=
e with {u'connectionParams': [{u'id': u'deb5a580-6994-4db9-9899-cd05c39c2ef=
a', u'connection': u'/vmstore/isos', u'iqn': u'', u'user': u'', u'tpgt': u'=
1', u'password': u'', u'port': u''}], u'storagepoolID': u'00000000-0000-000=
0-0000-000000000000', u'domainType': 4}
Thread-1735::DEBUG::2014-11-17 15:50:31,431::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`1cdc582f-bca2-49c1-a48d-4463f53f0481`::moving=
from state init -> state preparing
Thread-1735::INFO::2014-11-17 15:50:31,431::logUtils::44::dispatcher::(wrap=
per) Run and protect: connectStorageServer(domType=3D4, spUUID=3Du'00000000=
-0000-0000-0000-000000000000', conList=3D[{u'connection': u'/vmstore/isos',=
u'iqn': u'', u'user': u'', u'tpgt': u'1', u'password': '******', u'id': u'=
deb5a580-6994-4db9-9899-cd05c39c2efa', u'port': u''}], options=3DNone)
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,433::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,433::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,433::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,433::__init__::3=
75::IOProcess::(_processLogs) (2322) Got request for method 'access'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:31,434::__init__::3=
75::IOProcess::(_processLogs) (2322) Queuing response
Thread-1735::DEBUG::2014-11-17 15:50:31,442::hsm::2389::Storage.HSM::(__pre=
fetchDomains) local _path: /vmstore/isos
Thread-1735::DEBUG::2014-11-17 15:50:31,442::hsm::2396::Storage.HSM::(__pre=
fetchDomains) Found SD uuids: ()
Thread-1735::DEBUG::2014-11-17 15:50:31,443::hsm::2452::Storage.HSM::(conne=
ctStorageServer) knownSDs: {158ef830-da69-48b4-95b0-3615d6fb5b00: storage.l=
ocalFsSD.findDomain, ac821c1f-b7ca-4534-a10f-9b98c325a070: storage.nfsSD.fi=
ndDomain}
Thread-1735::INFO::2014-11-17 15:50:31,443::logUtils::47::dispatcher::(wrap=
per) Run and protect: connectStorageServer, Return response: {'statuslist':=
[{'status': 0, 'id': u'deb5a580-6994-4db9-9899-cd05c39c2efa'}]}
Thread-1735::DEBUG::2014-11-17 15:50:31,443::task::1191::Storage.TaskManage=
r.Task::(prepare) Task=3D`1cdc582f-bca2-49c1-a48d-4463f53f0481`::finished: =
{'statuslist': [{'status': 0, 'id': u'deb5a580-6994-4db9-9899-cd05c39c2efa'=
}]}
Thread-1735::DEBUG::2014-11-17 15:50:31,444::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`1cdc582f-bca2-49c1-a48d-4463f53f0481`::moving=
from state preparing -> state finished
Thread-1735::DEBUG::2014-11-17 15:50:31,444::resourceManager::940::Storage.=
ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources =
{}
Thread-1735::DEBUG::2014-11-17 15:50:31,444::resourceManager::977::Storage.=
ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {}
Thread-1735::DEBUG::2014-11-17 15:50:31,444::task::993::Storage.TaskManager=
.Task::(_decref) Task=3D`1cdc582f-bca2-49c1-a48d-4463f53f0481`::ref 0 abort=
ing False
Thread-1735::DEBUG::2014-11-17 15:50:31,445::__init__::498::jsonrpc.JsonRpc=
Server::(_serveRequest) Return 'StoragePool.connectStorageServer' in bridge=
with [{'status': 0, 'id': u'deb5a580-6994-4db9-9899-cd05c39c2efa'}]
Thread-1735::DEBUG::2014-11-17 15:50:31,445::stompReactor::163::yajsonrpc.S=
tompServer::(send) Sending response
JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,451::stompReactor::98::B=
roker.StompAdapter::(handle_frame) Handling message <StompFrame command=3D'=
SEND'>
Thread-1736::DEBUG::2014-11-17 15:50:31,454::__init__::467::jsonrpc.JsonRpc=
Server::(_serveRequest) Calling 'StorageDomain.create' in bridge with {u'na=
me': u'test', u'domainType': 4, u'domainClass': 1, u'typeArgs': u'/vmstore/=
isos', u'version': u'3', u'storagedomainID': u'c46aa2c4-c405-45eb-b7fd-71f6=
27d1c546'}
JsonRpcServer::DEBUG::2014-11-17 15:50:31,454::__init__::504::jsonrpc.JsonR=
pcServer::(serve_requests) Waiting for request
Thread-1736::DEBUG::2014-11-17 15:50:31,459::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::moving=
from state init -> state preparing
Thread-1736::INFO::2014-11-17 15:50:31,459::logUtils::44::dispatcher::(wrap=
per) Run and protect: createStorageDomain(storageType=3D4, sdUUID=3Du'c46aa=
2c4-c405-45eb-b7fd-71f627d1c546', domainName=3Du'test', typeSpecificArg=3Du=
'/vmstore/isos', domClass=3D1, domVersion=3Du'3', options=3DNone)
Thread-1736::DEBUG::2014-11-17 15:50:31,459::misc::741::Storage.SamplingMet=
hod::(__call__) Trying to enter sampling method (storage.sdc.refreshStorage=
)
Thread-1736::DEBUG::2014-11-17 15:50:31,460::misc::743::Storage.SamplingMet=
hod::(__call__) Got in to sampling method
Thread-1736::DEBUG::2014-11-17 15:50:31,460::misc::741::Storage.SamplingMet=
hod::(__call__) Trying to enter sampling method (storage.iscsi.rescan)
Thread-1736::DEBUG::2014-11-17 15:50:31,460::misc::743::Storage.SamplingMet=
hod::(__call__) Got in to sampling method
Thread-1736::DEBUG::2014-11-17 15:50:31,461::iscsi::403::Storage.ISCSI::(re=
scan) Performing SCSI scan, this will take up to 30 seconds
Thread-1736::DEBUG::2014-11-17 15:50:31,461::iscsiadm::92::Storage.Misc.exc=
Cmd::(_runCmd) /usr/bin/sudo -n /sbin/iscsiadm -m session -R (cwd None)
Thread-1736::DEBUG::2014-11-17 15:50:31,517::misc::751::Storage.SamplingMet=
hod::(__call__) Returning last result
Thread-1736::DEBUG::2014-11-17 15:50:31,521::multipath::110::Storage.Misc.e=
xcCmd::(rescan) /usr/bin/sudo -n /sbin/multipath (cwd None)
Thread-1736::DEBUG::2014-11-17 15:50:31,705::multipath::110::Storage.Misc.e=
xcCmd::(rescan) SUCCESS: <err> =3D ''; <rc> =3D 0
Thread-1736::DEBUG::2014-11-17 15:50:31,706::lvm::489::Storage.OperationMut=
ex::(_invalidateAllPvs) Operation 'lvm invalidate operation' got the operat=
ion mutex
Thread-1736::DEBUG::2014-11-17 15:50:31,707::lvm::491::Storage.OperationMut=
ex::(_invalidateAllPvs) Operation 'lvm invalidate operation' released the o=
peration mutex
Thread-1736::DEBUG::2014-11-17 15:50:31,707::lvm::500::Storage.OperationMut=
ex::(_invalidateAllVgs) Operation 'lvm invalidate operation' got the operat=
ion mutex
Thread-1736::DEBUG::2014-11-17 15:50:31,708::lvm::502::Storage.OperationMut=
ex::(_invalidateAllVgs) Operation 'lvm invalidate operation' released the o=
peration mutex
Thread-1736::DEBUG::2014-11-17 15:50:31,708::lvm::520::Storage.OperationMut=
ex::(_invalidateAllLvs) Operation 'lvm invalidate operation' got the operat=
ion mutex
Thread-1736::DEBUG::2014-11-17 15:50:31,708::lvm::522::Storage.OperationMut=
ex::(_invalidateAllLvs) Operation 'lvm invalidate operation' released the o=
peration mutex
Thread-1736::DEBUG::2014-11-17 15:50:31,709::misc::751::Storage.SamplingMet=
hod::(__call__) Returning last result
Thread-1736::ERROR::2014-11-17 15:50:31,709::sdc::137::Storage.StorageDomai=
nCache::(_findDomain) looking for unfetched domain c46aa2c4-c405-45eb-b7fd-=
71f627d1c546
Thread-1736::ERROR::2014-11-17 15:50:31,709::sdc::154::Storage.StorageDomai=
nCache::(_findUnfetchedDomain) looking for domain c46aa2c4-c405-45eb-b7fd-7=
1f627d1c546
Thread-1736::DEBUG::2014-11-17 15:50:31,710::lvm::365::Storage.OperationMut=
ex::(_reloadvgs) Operation 'lvm reload operation' got the operation mutex
Thread-1736::DEBUG::2014-11-17 15:50:31,712::lvm::288::Storage.Misc.excCmd:=
:(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names =
=3D ["^/dev/mapper/"] ignore_suspended_devices=3D1 write_cache_state=3D0 di=
sable_after_error_count=3D3 obtain_device_list_from_udev=3D0 filter =3D [ '=
\''r|.*|'\'' ] } global { locking_type=3D1 prioritise_write_locks=3D1 w=
ait_for_locks=3D1 use_lvmetad=3D0 } backup { retain_min =3D 50 retain_d=
ays =3D 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreski=
ppedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count=
,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name c46aa2c4-c405-45eb-=
b7fd-71f627d1c546 (cwd None)
Thread-1736::DEBUG::2014-11-17 15:50:32,049::lvm::288::Storage.Misc.excCmd:=
:(cmd) FAILED: <err> =3D ' Volume group "c46aa2c4-c405-45eb-b7fd-71f627d1c=
546" not found\n Skipping volume group c46aa2c4-c405-45eb-b7fd-71f627d1c54=
6\n'; <rc> =3D 5
Thread-1736::WARNING::2014-11-17 15:50:32,052::lvm::370::Storage.LVM::(_rel=
oadvgs) lvm vgs failed: 5 [] [' Volume group "c46aa2c4-c405-45eb-b7fd-71f6=
27d1c546" not found', ' Skipping volume group c46aa2c4-c405-45eb-b7fd-71f6=
27d1c546']
Thread-1736::DEBUG::2014-11-17 15:50:32,052::lvm::407::Storage.OperationMut=
ex::(_reloadvgs) Operation 'lvm reload operation' released the operation mu=
tex
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,060::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,061::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,062::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,062::__init__::3=
75::IOProcess::(_processLogs) (2323) Got request for method 'glob'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,062::__init__::3=
75::IOProcess::(_processLogs) (2323) Queuing response
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,064::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,065::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,065::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,065::__init__::3=
75::IOProcess::(_processLogs) (2324) Got request for method 'glob'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,066::__init__::3=
75::IOProcess::(_processLogs) (2324) Queuing response
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,067::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,068::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,069::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,069::__init__::3=
75::IOProcess::(_processLogs) (2325) Got request for method 'glob'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,069::__init__::3=
75::IOProcess::(_processLogs) (2325) Queuing response
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,079::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,082::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,082::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,083::__init__::3=
75::IOProcess::(_processLogs) (2326) Got request for method 'glob'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,083::__init__::3=
75::IOProcess::(_processLogs) (2326) Queuing response
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,085::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,086::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,086::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,087::__init__::3=
75::IOProcess::(_processLogs) (2327) Got request for method 'glob'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,087::__init__::3=
75::IOProcess::(_processLogs) (2327) Queuing response
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,089::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,089::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,090::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,090::__init__::3=
75::IOProcess::(_processLogs) (2328) Got request for method 'glob'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,090::__init__::3=
75::IOProcess::(_processLogs) (2328) Queuing response
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,092::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,093::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,093::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,093::__init__::3=
75::IOProcess::(_processLogs) (2329) Got request for method 'glob'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,093::__init__::3=
75::IOProcess::(_processLogs) (2329) Queuing response
Thread-1736::ERROR::2014-11-17 15:50:32,095::sdc::143::Storage.StorageDomai=
nCache::(_findDomain) domain c46aa2c4-c405-45eb-b7fd-71f627d1c546 not found
Traceback (most recent call last):
File "/usr/share/vdsm/storage/sdc.py", line 141, in _findDomain
dom =3D findMethod(sdUUID)
File "/usr/share/vdsm/storage/sdc.py", line 171, in _findUnfetchedDomain
raise se.StorageDomainDoesNotExist(sdUUID)
StorageDomainDoesNotExist: Storage domain does not exist: (u'c46aa2c4-c405-=
45eb-b7fd-71f627d1c546',)
Thread-1736::INFO::2014-11-17 15:50:32,096::localFsSD::73::Storage.StorageD=
omain::(create) sdUUID=3Dc46aa2c4-c405-45eb-b7fd-71f627d1c546 domainName=3D=
test remotePath=3D/vmstore/isos domClass=3D1
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,097::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,098::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,098::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,098::__init__::3=
75::IOProcess::(_processLogs) (2330) Got request for method 'access'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,099::__init__::3=
75::IOProcess::(_processLogs) (2330) Queuing response
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,107::__init__::3=
75::IOProcess::(_processLogs) Receiving request...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,107::__init__::3=
75::IOProcess::(_processLogs) Queuing request in the thread pool...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,108::__init__::3=
75::IOProcess::(_processLogs) Extracting request information...
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,108::__init__::3=
75::IOProcess::(_processLogs) (2331) Got request for method 'touch'
ioprocess communication (5073)::DEBUG::2014-11-17 15:50:32,108::__init__::3=
75::IOProcess::(_processLogs) (2331) Queuing response
Thread-1736::ERROR::2014-11-17 15:50:32,109::fileSD::92::Storage.fileSD::(v=
alidateFileSystemFeatures) Underlying file system doesn't supportdirect IO
Thread-1736::ERROR::2014-11-17 15:50:32,109::task::866::Storage.TaskManager=
.Task::(_setError) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::Unexpecte=
d error
Traceback (most recent call last):
File "/usr/share/vdsm/storage/task.py", line 873, in _run
return fn(*args, **kargs)
File "/usr/share/vdsm/logUtils.py", line 45, in wrapper
res =3D f(*args, **kwargs)
File "/usr/share/vdsm/storage/hsm.py", line 2683, in createStorageDomain
domVersion)
File "/usr/share/vdsm/storage/localFsSD.py", line 84, in create
cls._preCreateValidation(sdUUID, mntPoint, remotePath, version)
File "/usr/share/vdsm/storage/localFsSD.py", line 51, in _preCreateValida=
tion
fileSD.validateFileSystemFeatures(sdUUID, domPath)
File "/usr/share/vdsm/storage/fileSD.py", line 94, in validateFileSystemF=
eatures
raise se.StorageDomainTargetUnsupported()
StorageDomainTargetUnsupported: Storage Domain target is unsupported: ()
Thread-1736::DEBUG::2014-11-17 15:50:32,110::task::885::Storage.TaskManager=
.Task::(_run) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::Task._run: 54f=
143dd-2229-4bc1-b639-9017ea3ecdd0 (4, u'c46aa2c4-c405-45eb-b7fd-71f627d1c54=
6', u'test', u'/vmstore/isos', 1, u'3') {} failed - stopping task
Thread-1736::DEBUG::2014-11-17 15:50:32,110::task::1217::Storage.TaskManage=
r.Task::(stop) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::stopping in s=
tate preparing (force False)
Thread-1736::DEBUG::2014-11-17 15:50:32,111::task::993::Storage.TaskManager=
.Task::(_decref) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::ref 1 abort=
ing True
Thread-1736::INFO::2014-11-17 15:50:32,111::task::1171::Storage.TaskManager=
.Task::(prepare) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::aborting: T=
ask is aborted: 'Storage Domain target is unsupported' - code 399
Thread-1736::DEBUG::2014-11-17 15:50:32,111::task::1176::Storage.TaskManage=
r.Task::(prepare) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::Prepare: a=
borted: Storage Domain target is unsupported
Thread-1736::DEBUG::2014-11-17 15:50:32,111::task::993::Storage.TaskManager=
.Task::(_decref) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::ref 0 abort=
ing True
Thread-1736::DEBUG::2014-11-17 15:50:32,112::task::928::Storage.TaskManager=
.Task::(_doAbort) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::Task._doAb=
ort: force False
Thread-1736::DEBUG::2014-11-17 15:50:32,112::resourceManager::977::Storage.=
ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {}
Thread-1736::DEBUG::2014-11-17 15:50:32,112::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::moving=
from state preparing -> state aborting
Thread-1736::DEBUG::2014-11-17 15:50:32,113::task::550::Storage.TaskManager=
.Task::(__state_aborting) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::_a=
borting: recover policy none
Thread-1736::DEBUG::2014-11-17 15:50:32,113::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`54f143dd-2229-4bc1-b639-9017ea3ecdd0`::moving=
from state aborting -> state failed
Thread-1736::DEBUG::2014-11-17 15:50:32,113::resourceManager::940::Storage.=
ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources =
{}
Thread-1736::DEBUG::2014-11-17 15:50:32,113::resourceManager::977::Storage.=
ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {}
Thread-1736::ERROR::2014-11-17 15:50:32,114::dispatcher::76::Storage.Dispat=
cher::(wrapper) {'status': {'message': 'Storage Domain target is unsupporte=
d: ()', 'code': 399}}
Thread-1736::DEBUG::2014-11-17 15:50:32,114::stompReactor::163::yajsonrpc.S=
tompServer::(send) Sending response
JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:32,212::stompReactor::98::B=
roker.StompAdapter::(handle_frame) Handling message <StompFrame command=3D'=
SEND'>
Thread-1744::DEBUG::2014-11-17 15:50:32,215::__init__::467::jsonrpc.JsonRpc=
Server::(_serveRequest) Calling 'StoragePool.disconnectStorageServer' in br=
idge with {u'connectionParams': [{u'id': u'deb5a580-6994-4db9-9899-cd05c39c=
2efa', u'connection': u'/vmstore/isos', u'iqn': u'', u'user': u'', u'tpgt':=
u'1', u'password': u'', u'port': u''}], u'storagepoolID': u'00000000-0000-=
0000-0000-000000000000', u'domainType': 4}
JsonRpcServer::DEBUG::2014-11-17 15:50:32,215::__init__::504::jsonrpc.JsonR=
pcServer::(serve_requests) Waiting for request
Thread-1744::DEBUG::2014-11-17 15:50:32,220::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`11fde6d7-ad39-4b40-bb40-00816fe2c131`::moving=
from state init -> state preparing
Thread-1744::INFO::2014-11-17 15:50:32,221::logUtils::44::dispatcher::(wrap=
per) Run and protect: disconnectStorageServer(domType=3D4, spUUID=3Du'00000=
000-0000-0000-0000-000000000000', conList=3D[{u'connection': u'/vmstore/iso=
s', u'iqn': u'', u'user': u'', u'tpgt': u'1', u'password': '******', u'id':=
u'deb5a580-6994-4db9-9899-cd05c39c2efa', u'port': u''}], options=3DNone)
Thread-1744::DEBUG::2014-11-17 15:50:32,221::misc::741::Storage.SamplingMet=
hod::(__call__) Trying to enter sampling method (storage.sdc.refreshStorage=
)
Thread-1744::DEBUG::2014-11-17 15:50:32,222::misc::743::Storage.SamplingMet=
hod::(__call__) Got in to sampling method
Thread-1744::DEBUG::2014-11-17 15:50:32,222::misc::741::Storage.SamplingMet=
hod::(__call__) Trying to enter sampling method (storage.iscsi.rescan)
Thread-1744::DEBUG::2014-11-17 15:50:32,222::misc::743::Storage.SamplingMet=
hod::(__call__) Got in to sampling method
Thread-1744::DEBUG::2014-11-17 15:50:32,222::iscsi::403::Storage.ISCSI::(re=
scan) Performing SCSI scan, this will take up to 30 seconds
Thread-1744::DEBUG::2014-11-17 15:50:32,223::iscsiadm::92::Storage.Misc.exc=
Cmd::(_runCmd) /usr/bin/sudo -n /sbin/iscsiadm -m session -R (cwd None)
Thread-1744::DEBUG::2014-11-17 15:50:32,276::misc::751::Storage.SamplingMet=
hod::(__call__) Returning last result
Thread-1744::DEBUG::2014-11-17 15:50:32,280::multipath::110::Storage.Misc.e=
xcCmd::(rescan) /usr/bin/sudo -n /sbin/multipath (cwd None)
Thread-1744::DEBUG::2014-11-17 15:50:32,409::multipath::110::Storage.Misc.e=
xcCmd::(rescan) SUCCESS: <err> =3D ''; <rc> =3D 0
Thread-1744::DEBUG::2014-11-17 15:50:32,410::lvm::489::Storage.OperationMut=
ex::(_invalidateAllPvs) Operation 'lvm invalidate operation' got the operat=
ion mutex
Thread-1744::DEBUG::2014-11-17 15:50:32,410::lvm::491::Storage.OperationMut=
ex::(_invalidateAllPvs) Operation 'lvm invalidate operation' released the o=
peration mutex
Thread-1744::DEBUG::2014-11-17 15:50:32,411::lvm::500::Storage.OperationMut=
ex::(_invalidateAllVgs) Operation 'lvm invalidate operation' got the operat=
ion mutex
Thread-1744::DEBUG::2014-11-17 15:50:32,411::lvm::502::Storage.OperationMut=
ex::(_invalidateAllVgs) Operation 'lvm invalidate operation' released the o=
peration mutex
Thread-1744::DEBUG::2014-11-17 15:50:32,412::lvm::520::Storage.OperationMut=
ex::(_invalidateAllLvs) Operation 'lvm invalidate operation' got the operat=
ion mutex
Thread-1744::DEBUG::2014-11-17 15:50:32,412::lvm::522::Storage.OperationMut=
ex::(_invalidateAllLvs) Operation 'lvm invalidate operation' released the o=
peration mutex
Thread-1744::DEBUG::2014-11-17 15:50:32,412::misc::751::Storage.SamplingMet=
hod::(__call__) Returning last result
Thread-1744::INFO::2014-11-17 15:50:32,413::logUtils::47::dispatcher::(wrap=
per) Run and protect: disconnectStorageServer, Return response: {'statuslis=
t': [{'status': 0, 'id': u'deb5a580-6994-4db9-9899-cd05c39c2efa'}]}
Thread-1744::DEBUG::2014-11-17 15:50:32,413::task::1191::Storage.TaskManage=
r.Task::(prepare) Task=3D`11fde6d7-ad39-4b40-bb40-00816fe2c131`::finished: =
{'statuslist': [{'status': 0, 'id': u'deb5a580-6994-4db9-9899-cd05c39c2efa'=
}]}
Thread-1744::DEBUG::2014-11-17 15:50:32,414::task::595::Storage.TaskManager=
.Task::(_updateState) Task=3D`11fde6d7-ad39-4b40-bb40-00816fe2c131`::moving=
from state preparing -> state finished
Thread-1744::DEBUG::2014-11-17 15:50:32,414::resourceManager::940::Storage.=
ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources =
{}
Thread-1744::DEBUG::2014-11-17 15:50:32,414::resourceManager::977::Storage.=
ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {}
Thread-1744::DEBUG::2014-11-17 15:50:32,414::task::993::Storage.TaskManager=
.Task::(_decref) Task=3D`11fde6d7-ad39-4b40-bb40-00816fe2c131`::ref 0 abort=
ing False
Thread-1744::DEBUG::2014-11-17 15:50:32,415::__init__::498::jsonrpc.JsonRpc=
Server::(_serveRequest) Return 'StoragePool.disconnectStorageServer' in bri=
dge with [{'status': 0, 'id': u'deb5a580-6994-4db9-9899-cd05c39c2efa'}]
Thread-1744::DEBUG::2014-11-17 15:50:32,416::stompReactor::163::yajsonrpc.S=
tompServer::(send) Sending response
--_000_EE5DB373DE433D4A87A60EE0284C92F926421EFDRISXMBX03adsuhn_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"EN-US" link=3D"blue" vlink=3D"purple">
<div class=3D"WordSection1">
<p class=3D"MsoNormal">Hello all,<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">I’m exploring using oVirt 3.5 as the managemen=
t engine for a new cluster I am building. I don’t really need high av=
ailability and I have 3 servers with fast SSDs on local storage I’d l=
ike to use, preferably using ZFS to ensure reliability
of the storage.<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">I set up a brand new CentOS 6.6 minimal install and =
have been able to get oVirt up using the all-in-one plugin. I can use local=
storage (the default EXT4 LVM filesystem CentOS sets up) to setup a local =
data center for each of the servers
but have run into issues when I try to provision a ZFS filesystem as a loc=
al storage domain. I’m using ZFS on Linux 0.6.3.<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">I first had multipath.conf issues, which prevented m=
e from even setting up a zpool using the local disks. After blacklisting th=
e local disks in /etc/multipath.conf, I was able to get zfs up and running =
and create the local domains, but
I get errors when I try to create a storage Domain of type: Data / Local o=
n Host and point at the ZFS path (/vmstore/isos) (PS: I’m not trying =
to create an ISO domain, it’s just a directory name isos)<o:p></o:p><=
/p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">The error message that comes up is “Error whil=
e executing action New Local Storage Domain: Storage Domain target is unsup=
ported”.<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Has anyone tried this before? I am able to set up an=
NFS export of the ZFS folder as a Storage Domain (using directions here:
<a href=3D"http://virt.guru/2014/02/25/installing-ovirt-with-shared-local-s=
torage/">
http://virt.guru/2014/02/25/installing-ovirt-with-shared-local-storage/</a>=
) but if possible, I’d like to skip the NFS layer if I can and just g=
o directly to the hardware.<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">The supervdsm.log shows:<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1734::DEBUG::2014-11-17 15:50:31,=
350::supervdsmServer::101::SuperVdsm.ServerCallback::(wrapper) call validat=
eAccess with ('qemu', ('qemu', 'kvm'), u'/vmstore/isos', 5) {}<o:p></o:p></=
p>
<p class=3D"MsoNormal">MainProcess|Thread-1734::DEBUG::2014-11-17 15:50:31,=
356::supervdsmServer::108::SuperVdsm.ServerCallback::(wrapper) return valid=
ateAccess with None<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1735::DEBUG::2014-11-17 15:50:31,=
436::supervdsmServer::101::SuperVdsm.ServerCallback::(wrapper) call validat=
eAccess with ('qemu', ('qemu', 'kvm'), u'/vmstore/isos', 5) {}<o:p></o:p></=
p>
<p class=3D"MsoNormal">MainProcess|Thread-1735::DEBUG::2014-11-17 15:50:31,=
441::supervdsmServer::108::SuperVdsm.ServerCallback::(wrapper) return valid=
ateAccess with None<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:31,=
519::supervdsmServer::101::SuperVdsm.ServerCallback::(wrapper) call hbaResc=
an with () {}<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1736::INFO::2014-11-17 15:50:31,5=
20::hba::54::Storage.HBA::(rescan) Rescanning HBAs<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:31,=
520::supervdsmServer::108::SuperVdsm.ServerCallback::(wrapper) return hbaRe=
scan with None<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:32,=
100::supervdsmServer::101::SuperVdsm.ServerCallback::(wrapper) call validat=
eAccess with ('qemu', ('qemu', 'kvm'), u'/rhev/data-center/mnt/_vmstore_iso=
s', 5) {}<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1736::DEBUG::2014-11-17 15:50:32,=
105::supervdsmServer::108::SuperVdsm.ServerCallback::(wrapper) return valid=
ateAccess with None<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1744::DEBUG::2014-11-17 15:50:32,=
278::supervdsmServer::101::SuperVdsm.ServerCallback::(wrapper) call hbaResc=
an with () {}<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1744::INFO::2014-11-17 15:50:32,2=
79::hba::54::Storage.HBA::(rescan) Rescanning HBAs<o:p></o:p></p>
<p class=3D"MsoNormal">MainProcess|Thread-1744::DEBUG::2014-11-17 15:50:32,=
279::supervdsmServer::108::SuperVdsm.ServerCallback::(wrapper) return hbaRe=
scan with None<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">And the vdsm.log shows:<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1732::DEBUG::2014-11-17 15:50:31,032::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`82d29b1b-0c33-4078-887=
b-476d95f4b1a1`::moving from state init -> state preparing<o:p></o:p></p=
>
<p class=3D"MsoNormal">Thread-1732::INFO::2014-11-17 15:50:31,032::logUtils=
::44::dispatcher::(wrapper) Run and protect: repoStats(options=3DNone)<o:p>=
</o:p></p>
<p class=3D"MsoNormal">Thread-1732::INFO::2014-11-17 15:50:31,033::logUtils=
::47::dispatcher::(wrapper) Run and protect: repoStats, Return response: {u=
'158ef830-da69-48b4-95b0-3615d6fb5b00': {'code': 0, 'version': 3, 'acquired=
': True, 'delay': '0.000627117', 'lastCheck':
'8.2', 'valid': True}}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1732::DEBUG::2014-11-17 15:50:31,033::task::1=
191::Storage.TaskManager.Task::(prepare) Task=3D`82d29b1b-0c33-4078-887b-47=
6d95f4b1a1`::finished: {u'158ef830-da69-48b4-95b0-3615d6fb5b00': {'code': 0=
, 'version': 3, 'acquired': True, 'delay':
'0.000627117', 'lastCheck': '8.2', 'valid': True}}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1732::DEBUG::2014-11-17 15:50:31,033::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`82d29b1b-0c33-4078-887=
b-476d95f4b1a1`::moving from state preparing -> state finished<o:p></o:p=
></p>
<p class=3D"MsoNormal">Thread-1732::DEBUG::2014-11-17 15:50:31,034::resourc=
eManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll=
requests {} resources {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1732::DEBUG::2014-11-17 15:50:31,034::resourc=
eManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll r=
equests {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1732::DEBUG::2014-11-17 15:50:31,034::task::9=
93::Storage.TaskManager.Task::(_decref) Task=3D`82d29b1b-0c33-4078-887b-476=
d95f4b1a1`::ref 0 aborting False<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1732::DEBUG::2014-11-17 15:50:31,042::stompRe=
actor::163::yajsonrpc.StompServer::(send) Sending response<o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,0=
60::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message =
<StompFrame command=3D'SEND'><o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpcServer::DEBUG::2014-11-17 15:50:31,062::__ini=
t__::504::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request<o:p><=
/o:p></p>
<p class=3D"MsoNormal">Thread-1733::DEBUG::2014-11-17 15:50:31,066::stompRe=
actor::163::yajsonrpc.StompServer::(send) Sending response<o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,3=
38::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message =
<StompFrame command=3D'SEND'><o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpcServer::DEBUG::2014-11-17 15:50:31,341::__ini=
t__::504::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request<o:p><=
/o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,341::__init_=
_::467::jsonrpc.JsonRpcServer::(_serveRequest) Calling 'StoragePool.connect=
StorageServer' in bridge with {u'connectionParams': [{u'id': u'00000000-000=
0-0000-0000-000000000000', u'connection':
u'/vmstore/isos', u'iqn': u'', u'user': u'', u'tpgt': u'1', u'password': u=
'', u'port': u''}], u'storagepoolID': u'00000000-0000-0000-0000-00000000000=
0', u'domainType': 4}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,344::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`4088bef4-489c-41a4-bcd=
4-d5f1906378b9`::moving from state init -> state preparing<o:p></o:p></p=
>
<p class=3D"MsoNormal">Thread-1734::INFO::2014-11-17 15:50:31,345::logUtils=
::44::dispatcher::(wrapper) Run and protect: connectStorageServer(domType=
=3D4, spUUID=3Du'00000000-0000-0000-0000-000000000000', conList=3D[{u'conne=
ction': u'/vmstore/isos', u'iqn': u'', u'user':
u'', u'tpgt': u'1', u'password': '******', u'id': u'00000000-0000-0000-000=
0-000000000000', u'port': u''}], options=3DNone)<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,346::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,346::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,347::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,347::__init__::375::IOProcess::(_processLogs) (2321) Got request for=
method 'access'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,347::__init__::375::IOProcess::(_processLogs) (2321) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,357::hsm::23=
89::Storage.HSM::(__prefetchDomains) local _path: /vmstore/isos<o:p></o:p><=
/p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,358::hsm::23=
96::Storage.HSM::(__prefetchDomains) Found SD uuids: ()<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,358::hsm::24=
52::Storage.HSM::(connectStorageServer) knownSDs: {158ef830-da69-48b4-95b0-=
3615d6fb5b00: storage.localFsSD.findDomain, ac821c1f-b7ca-4534-a10f-9b98c32=
5a070: storage.nfsSD.findDomain}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::INFO::2014-11-17 15:50:31,358::logUtils=
::47::dispatcher::(wrapper) Run and protect: connectStorageServer, Return r=
esponse: {'statuslist': [{'status': 0, 'id': u'00000000-0000-0000-0000-0000=
00000000'}]}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,359::task::1=
191::Storage.TaskManager.Task::(prepare) Task=3D`4088bef4-489c-41a4-bcd4-d5=
f1906378b9`::finished: {'statuslist': [{'status': 0, 'id': u'00000000-0000-=
0000-0000-000000000000'}]}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,359::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`4088bef4-489c-41a4-bcd=
4-d5f1906378b9`::moving from state preparing -> state finished<o:p></o:p=
></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,359::resourc=
eManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll=
requests {} resources {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,359::resourc=
eManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll r=
equests {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,360::task::9=
93::Storage.TaskManager.Task::(_decref) Task=3D`4088bef4-489c-41a4-bcd4-d5f=
1906378b9`::ref 0 aborting False<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,360::__init_=
_::498::jsonrpc.JsonRpcServer::(_serveRequest) Return 'StoragePool.connectS=
torageServer' in bridge with [{'status': 0, 'id': u'00000000-0000-0000-0000=
-000000000000'}]<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1734::DEBUG::2014-11-17 15:50:31,361::stompRe=
actor::163::yajsonrpc.StompServer::(send) Sending response<o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,4=
25::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message =
<StompFrame command=3D'SEND'><o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpcServer::DEBUG::2014-11-17 15:50:31,428::__ini=
t__::504::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request<o:p><=
/o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,428::__init_=
_::467::jsonrpc.JsonRpcServer::(_serveRequest) Calling 'StoragePool.connect=
StorageServer' in bridge with {u'connectionParams': [{u'id': u'deb5a580-699=
4-4db9-9899-cd05c39c2efa', u'connection':
u'/vmstore/isos', u'iqn': u'', u'user': u'', u'tpgt': u'1', u'password': u=
'', u'port': u''}], u'storagepoolID': u'00000000-0000-0000-0000-00000000000=
0', u'domainType': 4}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,431::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`1cdc582f-bca2-49c1-a48=
d-4463f53f0481`::moving from state init -> state preparing<o:p></o:p></p=
>
<p class=3D"MsoNormal">Thread-1735::INFO::2014-11-17 15:50:31,431::logUtils=
::44::dispatcher::(wrapper) Run and protect: connectStorageServer(domType=
=3D4, spUUID=3Du'00000000-0000-0000-0000-000000000000', conList=3D[{u'conne=
ction': u'/vmstore/isos', u'iqn': u'', u'user':
u'', u'tpgt': u'1', u'password': '******', u'id': u'deb5a580-6994-4db9-989=
9-cd05c39c2efa', u'port': u''}], options=3DNone)<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,433::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,433::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,433::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,433::__init__::375::IOProcess::(_processLogs) (2322) Got request for=
method 'access'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:31,434::__init__::375::IOProcess::(_processLogs) (2322) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,442::hsm::23=
89::Storage.HSM::(__prefetchDomains) local _path: /vmstore/isos<o:p></o:p><=
/p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,442::hsm::23=
96::Storage.HSM::(__prefetchDomains) Found SD uuids: ()<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,443::hsm::24=
52::Storage.HSM::(connectStorageServer) knownSDs: {158ef830-da69-48b4-95b0-=
3615d6fb5b00: storage.localFsSD.findDomain, ac821c1f-b7ca-4534-a10f-9b98c32=
5a070: storage.nfsSD.findDomain}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::INFO::2014-11-17 15:50:31,443::logUtils=
::47::dispatcher::(wrapper) Run and protect: connectStorageServer, Return r=
esponse: {'statuslist': [{'status': 0, 'id': u'deb5a580-6994-4db9-9899-cd05=
c39c2efa'}]}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,443::task::1=
191::Storage.TaskManager.Task::(prepare) Task=3D`1cdc582f-bca2-49c1-a48d-44=
63f53f0481`::finished: {'statuslist': [{'status': 0, 'id': u'deb5a580-6994-=
4db9-9899-cd05c39c2efa'}]}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,444::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`1cdc582f-bca2-49c1-a48=
d-4463f53f0481`::moving from state preparing -> state finished<o:p></o:p=
></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,444::resourc=
eManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll=
requests {} resources {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,444::resourc=
eManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll r=
equests {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,444::task::9=
93::Storage.TaskManager.Task::(_decref) Task=3D`1cdc582f-bca2-49c1-a48d-446=
3f53f0481`::ref 0 aborting False<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,445::__init_=
_::498::jsonrpc.JsonRpcServer::(_serveRequest) Return 'StoragePool.connectS=
torageServer' in bridge with [{'status': 0, 'id': u'deb5a580-6994-4db9-9899=
-cd05c39c2efa'}]<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1735::DEBUG::2014-11-17 15:50:31,445::stompRe=
actor::163::yajsonrpc.StompServer::(send) Sending response<o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:31,4=
51::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message =
<StompFrame command=3D'SEND'><o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,454::__init_=
_::467::jsonrpc.JsonRpcServer::(_serveRequest) Calling 'StorageDomain.creat=
e' in bridge with {u'name': u'test', u'domainType': 4, u'domainClass': 1, u=
'typeArgs': u'/vmstore/isos', u'version':
u'3', u'storagedomainID': u'c46aa2c4-c405-45eb-b7fd-71f627d1c546'}<o:p></o=
:p></p>
<p class=3D"MsoNormal">JsonRpcServer::DEBUG::2014-11-17 15:50:31,454::__ini=
t__::504::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request<o:p><=
/o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,459::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`54f143dd-2229-4bc1-b63=
9-9017ea3ecdd0`::moving from state init -> state preparing<o:p></o:p></p=
>
<p class=3D"MsoNormal">Thread-1736::INFO::2014-11-17 15:50:31,459::logUtils=
::44::dispatcher::(wrapper) Run and protect: createStorageDomain(storageTyp=
e=3D4, sdUUID=3Du'c46aa2c4-c405-45eb-b7fd-71f627d1c546', domainName=3Du'tes=
t', typeSpecificArg=3Du'/vmstore/isos', domClass=3D1,
domVersion=3Du'3', options=3DNone)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,459::misc::7=
41::Storage.SamplingMethod::(__call__) Trying to enter sampling method (sto=
rage.sdc.refreshStorage)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,460::misc::7=
43::Storage.SamplingMethod::(__call__) Got in to sampling method<o:p></o:p>=
</p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,460::misc::7=
41::Storage.SamplingMethod::(__call__) Trying to enter sampling method (sto=
rage.iscsi.rescan)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,460::misc::7=
43::Storage.SamplingMethod::(__call__) Got in to sampling method<o:p></o:p>=
</p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,461::iscsi::=
403::Storage.ISCSI::(rescan) Performing SCSI scan, this will take up to 30 =
seconds<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,461::iscsiad=
m::92::Storage.Misc.excCmd::(_runCmd) /usr/bin/sudo -n /sbin/iscsiadm -m se=
ssion -R (cwd None)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,517::misc::7=
51::Storage.SamplingMethod::(__call__) Returning last result<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,521::multipa=
th::110::Storage.Misc.excCmd::(rescan) /usr/bin/sudo -n /sbin/multipath (cw=
d None)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,705::multipa=
th::110::Storage.Misc.excCmd::(rescan) SUCCESS: <err> =3D ''; <rc&=
gt; =3D 0<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,706::lvm::48=
9::Storage.OperationMutex::(_invalidateAllPvs) Operation 'lvm invalidate op=
eration' got the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,707::lvm::49=
1::Storage.OperationMutex::(_invalidateAllPvs) Operation 'lvm invalidate op=
eration' released the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,707::lvm::50=
0::Storage.OperationMutex::(_invalidateAllVgs) Operation 'lvm invalidate op=
eration' got the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,708::lvm::50=
2::Storage.OperationMutex::(_invalidateAllVgs) Operation 'lvm invalidate op=
eration' released the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,708::lvm::52=
0::Storage.OperationMutex::(_invalidateAllLvs) Operation 'lvm invalidate op=
eration' got the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,708::lvm::52=
2::Storage.OperationMutex::(_invalidateAllLvs) Operation 'lvm invalidate op=
eration' released the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,709::misc::7=
51::Storage.SamplingMethod::(__call__) Returning last result<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::ERROR::2014-11-17 15:50:31,709::sdc::13=
7::Storage.StorageDomainCache::(_findDomain) looking for unfetched domain c=
46aa2c4-c405-45eb-b7fd-71f627d1c546<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::ERROR::2014-11-17 15:50:31,709::sdc::15=
4::Storage.StorageDomainCache::(_findUnfetchedDomain) looking for domain c4=
6aa2c4-c405-45eb-b7fd-71f627d1c546<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,710::lvm::36=
5::Storage.OperationMutex::(_reloadvgs) Operation 'lvm reload operation' go=
t the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:31,712::lvm::28=
8::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' dev=
ices { preferred_names =3D ["^/dev/mapper/"] ignore_suspended_dev=
ices=3D1 write_cache_state=3D0 disable_after_error_count=3D3
obtain_device_list_from_udev=3D0 filter =3D [ '\''r|.*|'\'' ] } glob=
al { locking_type=3D1 prioritise_write_locks=3D1 wait_for=
_locks=3D1 use_lvmetad=3D0 } backup { retain_min =3D 50&n=
bsp; retain_days =3D 0 } ' --noheadings --units b --nosuffix --separator '|=
' --ignoreskippedcluster
-o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_md=
a_size,vg_mda_free,lv_count,pv_count,pv_name c46aa2c4-c405-45eb-b7fd-71f627=
d1c546 (cwd None)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,049::lvm::28=
8::Storage.Misc.excCmd::(cmd) FAILED: <err> =3D ' Volume group =
"c46aa2c4-c405-45eb-b7fd-71f627d1c546" not found\n Skipping=
volume group c46aa2c4-c405-45eb-b7fd-71f627d1c546\n'; <rc> =3D
5<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::WARNING::2014-11-17 15:50:32,052::lvm::=
370::Storage.LVM::(_reloadvgs) lvm vgs failed: 5 [] [' Volume group &=
quot;c46aa2c4-c405-45eb-b7fd-71f627d1c546" not found', ' Skippin=
g volume group c46aa2c4-c405-45eb-b7fd-71f627d1c546']<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,052::lvm::40=
7::Storage.OperationMutex::(_reloadvgs) Operation 'lvm reload operation' re=
leased the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,060::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,061::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,062::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,062::__init__::375::IOProcess::(_processLogs) (2323) Got request for=
method 'glob'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,062::__init__::375::IOProcess::(_processLogs) (2323) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,064::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,065::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,065::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,065::__init__::375::IOProcess::(_processLogs) (2324) Got request for=
method 'glob'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,066::__init__::375::IOProcess::(_processLogs) (2324) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,067::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,068::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,069::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,069::__init__::375::IOProcess::(_processLogs) (2325) Got request for=
method 'glob'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,069::__init__::375::IOProcess::(_processLogs) (2325) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,079::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,082::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,082::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,083::__init__::375::IOProcess::(_processLogs) (2326) Got request for=
method 'glob'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,083::__init__::375::IOProcess::(_processLogs) (2326) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,085::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,086::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,086::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,087::__init__::375::IOProcess::(_processLogs) (2327) Got request for=
method 'glob'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,087::__init__::375::IOProcess::(_processLogs) (2327) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,089::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,089::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,090::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,090::__init__::375::IOProcess::(_processLogs) (2328) Got request for=
method 'glob'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,090::__init__::375::IOProcess::(_processLogs) (2328) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,092::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,093::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,093::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,093::__init__::375::IOProcess::(_processLogs) (2329) Got request for=
method 'glob'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,093::__init__::375::IOProcess::(_processLogs) (2329) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::ERROR::2014-11-17 15:50:32,095::sdc::14=
3::Storage.StorageDomainCache::(_findDomain) domain c46aa2c4-c405-45eb-b7fd=
-71f627d1c546 not found<o:p></o:p></p>
<p class=3D"MsoNormal">Traceback (most recent call last):<o:p></o:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/storage/sdc.py&quo=
t;, line 141, in _findDomain<o:p></o:p></p>
<p class=3D"MsoNormal"> dom =3D findMethod(sdUUID)<o:p></=
o:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/storage/sdc.py&quo=
t;, line 171, in _findUnfetchedDomain<o:p></o:p></p>
<p class=3D"MsoNormal"> raise se.StorageDomainDoesNotExis=
t(sdUUID)<o:p></o:p></p>
<p class=3D"MsoNormal">StorageDomainDoesNotExist: Storage domain does not e=
xist: (u'c46aa2c4-c405-45eb-b7fd-71f627d1c546',)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::INFO::2014-11-17 15:50:32,096::localFsS=
D::73::Storage.StorageDomain::(create) sdUUID=3Dc46aa2c4-c405-45eb-b7fd-71f=
627d1c546 domainName=3Dtest remotePath=3D/vmstore/isos domClass=3D1<o:p></o=
:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,097::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,098::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,098::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,098::__init__::375::IOProcess::(_processLogs) (2330) Got request for=
method 'access'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,099::__init__::375::IOProcess::(_processLogs) (2330) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,107::__init__::375::IOProcess::(_processLogs) Receiving request...<o=
:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,107::__init__::375::IOProcess::(_processLogs) Queuing request in the=
thread pool...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,108::__init__::375::IOProcess::(_processLogs) Extracting request inf=
ormation...<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,108::__init__::375::IOProcess::(_processLogs) (2331) Got request for=
method 'touch'<o:p></o:p></p>
<p class=3D"MsoNormal">ioprocess communication (5073)::DEBUG::2014-11-17 15=
:50:32,108::__init__::375::IOProcess::(_processLogs) (2331) Queuing respons=
e<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::ERROR::2014-11-17 15:50:32,109::fileSD:=
:92::Storage.fileSD::(validateFileSystemFeatures) Underlying file system do=
esn't supportdirect IO<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::ERROR::2014-11-17 15:50:32,109::task::8=
66::Storage.TaskManager.Task::(_setError) Task=3D`54f143dd-2229-4bc1-b639-9=
017ea3ecdd0`::Unexpected error<o:p></o:p></p>
<p class=3D"MsoNormal">Traceback (most recent call last):<o:p></o:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/storage/task.py&qu=
ot;, line 873, in _run<o:p></o:p></p>
<p class=3D"MsoNormal"> return fn(*args, **kargs)<o:p></o=
:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/logUtils.py",=
line 45, in wrapper<o:p></o:p></p>
<p class=3D"MsoNormal"> res =3D f(*args, **kwargs)<o:p></=
o:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/storage/hsm.py&quo=
t;, line 2683, in createStorageDomain<o:p></o:p></p>
<p class=3D"MsoNormal"> domVersion)<o:p></o:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/storage/localFsSD.=
py", line 84, in create<o:p></o:p></p>
<p class=3D"MsoNormal"> cls._preCreateValidation(sdUUID, =
mntPoint, remotePath, version)<o:p></o:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/storage/localFsSD.=
py", line 51, in _preCreateValidation<o:p></o:p></p>
<p class=3D"MsoNormal"> fileSD.validateFileSystemFeatures=
(sdUUID, domPath)<o:p></o:p></p>
<p class=3D"MsoNormal"> File "/usr/share/vdsm/storage/fileSD.py&=
quot;, line 94, in validateFileSystemFeatures<o:p></o:p></p>
<p class=3D"MsoNormal"> raise se.StorageDomainTargetUnsup=
ported()<o:p></o:p></p>
<p class=3D"MsoNormal">StorageDomainTargetUnsupported: Storage Domain targe=
t is unsupported: ()<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,110::task::8=
85::Storage.TaskManager.Task::(_run) Task=3D`54f143dd-2229-4bc1-b639-9017ea=
3ecdd0`::Task._run: 54f143dd-2229-4bc1-b639-9017ea3ecdd0 (4, u'c46aa2c4-c40=
5-45eb-b7fd-71f627d1c546', u'test',
u'/vmstore/isos', 1, u'3') {} failed - stopping task<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,110::task::1=
217::Storage.TaskManager.Task::(stop) Task=3D`54f143dd-2229-4bc1-b639-9017e=
a3ecdd0`::stopping in state preparing (force False)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,111::task::9=
93::Storage.TaskManager.Task::(_decref) Task=3D`54f143dd-2229-4bc1-b639-901=
7ea3ecdd0`::ref 1 aborting True<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::INFO::2014-11-17 15:50:32,111::task::11=
71::Storage.TaskManager.Task::(prepare) Task=3D`54f143dd-2229-4bc1-b639-901=
7ea3ecdd0`::aborting: Task is aborted: 'Storage Domain target is unsupporte=
d' - code 399<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,111::task::1=
176::Storage.TaskManager.Task::(prepare) Task=3D`54f143dd-2229-4bc1-b639-90=
17ea3ecdd0`::Prepare: aborted: Storage Domain target is unsupported<o:p></o=
:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,111::task::9=
93::Storage.TaskManager.Task::(_decref) Task=3D`54f143dd-2229-4bc1-b639-901=
7ea3ecdd0`::ref 0 aborting True<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,112::task::9=
28::Storage.TaskManager.Task::(_doAbort) Task=3D`54f143dd-2229-4bc1-b639-90=
17ea3ecdd0`::Task._doAbort: force False<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,112::resourc=
eManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll r=
equests {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,112::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`54f143dd-2229-4bc1-b63=
9-9017ea3ecdd0`::moving from state preparing -> state aborting<o:p></o:p=
></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,113::task::5=
50::Storage.TaskManager.Task::(__state_aborting) Task=3D`54f143dd-2229-4bc1=
-b639-9017ea3ecdd0`::_aborting: recover policy none<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,113::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`54f143dd-2229-4bc1-b63=
9-9017ea3ecdd0`::moving from state aborting -> state failed<o:p></o:p></=
p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,113::resourc=
eManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll=
requests {} resources {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,113::resourc=
eManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll r=
equests {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::ERROR::2014-11-17 15:50:32,114::dispatc=
her::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Storage Doma=
in target is unsupported: ()', 'code': 399}}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1736::DEBUG::2014-11-17 15:50:32,114::stompRe=
actor::163::yajsonrpc.StompServer::(send) Sending response<o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpc (StompReactor)::DEBUG::2014-11-17 15:50:32,2=
12::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message =
<StompFrame command=3D'SEND'><o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,215::__init_=
_::467::jsonrpc.JsonRpcServer::(_serveRequest) Calling 'StoragePool.disconn=
ectStorageServer' in bridge with {u'connectionParams': [{u'id': u'deb5a580-=
6994-4db9-9899-cd05c39c2efa', u'connection':
u'/vmstore/isos', u'iqn': u'', u'user': u'', u'tpgt': u'1', u'password': u=
'', u'port': u''}], u'storagepoolID': u'00000000-0000-0000-0000-00000000000=
0', u'domainType': 4}<o:p></o:p></p>
<p class=3D"MsoNormal">JsonRpcServer::DEBUG::2014-11-17 15:50:32,215::__ini=
t__::504::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request<o:p><=
/o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,220::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`11fde6d7-ad39-4b40-bb4=
0-00816fe2c131`::moving from state init -> state preparing<o:p></o:p></p=
>
<p class=3D"MsoNormal">Thread-1744::INFO::2014-11-17 15:50:32,221::logUtils=
::44::dispatcher::(wrapper) Run and protect: disconnectStorageServer(domTyp=
e=3D4, spUUID=3Du'00000000-0000-0000-0000-000000000000', conList=3D[{u'conn=
ection': u'/vmstore/isos', u'iqn': u'',
u'user': u'', u'tpgt': u'1', u'password': '******', u'id': u'deb5a580-6994=
-4db9-9899-cd05c39c2efa', u'port': u''}], options=3DNone)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,221::misc::7=
41::Storage.SamplingMethod::(__call__) Trying to enter sampling method (sto=
rage.sdc.refreshStorage)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,222::misc::7=
43::Storage.SamplingMethod::(__call__) Got in to sampling method<o:p></o:p>=
</p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,222::misc::7=
41::Storage.SamplingMethod::(__call__) Trying to enter sampling method (sto=
rage.iscsi.rescan)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,222::misc::7=
43::Storage.SamplingMethod::(__call__) Got in to sampling method<o:p></o:p>=
</p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,222::iscsi::=
403::Storage.ISCSI::(rescan) Performing SCSI scan, this will take up to 30 =
seconds<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,223::iscsiad=
m::92::Storage.Misc.excCmd::(_runCmd) /usr/bin/sudo -n /sbin/iscsiadm -m se=
ssion -R (cwd None)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,276::misc::7=
51::Storage.SamplingMethod::(__call__) Returning last result<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,280::multipa=
th::110::Storage.Misc.excCmd::(rescan) /usr/bin/sudo -n /sbin/multipath (cw=
d None)<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,409::multipa=
th::110::Storage.Misc.excCmd::(rescan) SUCCESS: <err> =3D ''; <rc&=
gt; =3D 0<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,410::lvm::48=
9::Storage.OperationMutex::(_invalidateAllPvs) Operation 'lvm invalidate op=
eration' got the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,410::lvm::49=
1::Storage.OperationMutex::(_invalidateAllPvs) Operation 'lvm invalidate op=
eration' released the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,411::lvm::50=
0::Storage.OperationMutex::(_invalidateAllVgs) Operation 'lvm invalidate op=
eration' got the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,411::lvm::50=
2::Storage.OperationMutex::(_invalidateAllVgs) Operation 'lvm invalidate op=
eration' released the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,412::lvm::52=
0::Storage.OperationMutex::(_invalidateAllLvs) Operation 'lvm invalidate op=
eration' got the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,412::lvm::52=
2::Storage.OperationMutex::(_invalidateAllLvs) Operation 'lvm invalidate op=
eration' released the operation mutex<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,412::misc::7=
51::Storage.SamplingMethod::(__call__) Returning last result<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::INFO::2014-11-17 15:50:32,413::logUtils=
::47::dispatcher::(wrapper) Run and protect: disconnectStorageServer, Retur=
n response: {'statuslist': [{'status': 0, 'id': u'deb5a580-6994-4db9-9899-c=
d05c39c2efa'}]}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,413::task::1=
191::Storage.TaskManager.Task::(prepare) Task=3D`11fde6d7-ad39-4b40-bb40-00=
816fe2c131`::finished: {'statuslist': [{'status': 0, 'id': u'deb5a580-6994-=
4db9-9899-cd05c39c2efa'}]}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,414::task::5=
95::Storage.TaskManager.Task::(_updateState) Task=3D`11fde6d7-ad39-4b40-bb4=
0-00816fe2c131`::moving from state preparing -> state finished<o:p></o:p=
></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,414::resourc=
eManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll=
requests {} resources {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,414::resourc=
eManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll r=
equests {}<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,414::task::9=
93::Storage.TaskManager.Task::(_decref) Task=3D`11fde6d7-ad39-4b40-bb40-008=
16fe2c131`::ref 0 aborting False<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,415::__init_=
_::498::jsonrpc.JsonRpcServer::(_serveRequest) Return 'StoragePool.disconne=
ctStorageServer' in bridge with [{'status': 0, 'id': u'deb5a580-6994-4db9-9=
899-cd05c39c2efa'}]<o:p></o:p></p>
<p class=3D"MsoNormal">Thread-1744::DEBUG::2014-11-17 15:50:32,416::stompRe=
actor::163::yajsonrpc.StompServer::(send) Sending response<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
</body>
</html>
--_000_EE5DB373DE433D4A87A60EE0284C92F926421EFDRISXMBX03adsuhn_--
10 years, 5 months
Re: [ovirt-users] ovirt-websocket-proxy uses the wrong IP
by mots
------=_Part_36_779334652.1416253714037
Content-Type: multipart/alternative;
boundary="=_B2Bqz28RlRkiQt0tI2lBQMQUJD-DsqIJ4LiGs35u4K91tsvv"
This is a multi-part message in MIME format. Your mail reader does not
understand MIME message format.
--=_B2Bqz28RlRkiQt0tI2lBQMQUJD-DsqIJ4LiGs35u4K91tsvv
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Thank you for your reply.=0D=0A=0D=0AThe engine resolves the node's IP co=
rrectly. A few details about the setup: It's a two node cluster with shar=
ed, internal storage using DRBD. The storage is managed by pacemaker, so =
that the node which currently serves as iscsi target gets assigned the ad=
ditional IP.=20=0D=0AThe Engine/websocket-proxy then always connects to t=
he storage IP when it attempts to connect to the node which currently fun=
ctions as iscsi target. This only happens in oVirt 3.5, and I was able to=
"fix" it by going back to 3.4.=0D=0A=0D=0ARegards,=0D=0A=0D=0Amots=0D=0A=
=20=0D=0A-----Urspr=C3=BCngliche Nachricht-----=0D=0A> Von:Simone Tirabos=
chi <stirabos(a)redhat.com <mailto:stirabos@redhat.com> >=0D=0A> Gesendet: =
Mon 17 November 2014 18:11=0D=0A> An: Patrick Lottenbach <pl(a)a-bot.ch <ma=
ilto:pl@a-bot.ch> >=0D=0A> CC: users(a)ovirt.org <mailto:users@ovirt.org>=20=
=0D=0A> Betreff: Re: [ovirt-users] ovirt-websocket-proxy uses the wrong I=
P=0D=0A>=20=0D=0A>=20=0D=0A>=20=0D=0A>=20=0D=0A>=20=0D=0A> ----- Original=
Message -----=0D=0A> > From: "mots" <mots(a)nepu.moe <mailto:mots@nepu.moe=
> >=0D=0A> > To: users(a)ovirt.org <mailto:users@ovirt.org>=20=0D=0A> > Sen=
t: Saturday, November 15, 2014 10:24:29 PM=0D=0A> > Subject: [ovirt-users=
] ovirt-websocket-proxy uses the wrong IP=0D=0A> >=20=0D=0A> > ovirt-webs=
ocket-proxy uses the wrong IP Hello,=0D=0A> >=20=0D=0A> > One of my nodes=
has two IP addresses, 10.42.0.101 and 10.42.0.103. Ovirt is=0D=0A> > con=
figured to use 10.42.0.101, yet the ovirt-websocket-proxy service tries=0D=
=0A> > to connect to 10.42.0.103, where no VNC server is listening.=0D=0A=
> >=20=0D=0A> > Is there any way I can configure it to use the correct ad=
dress=3F=0D=0A> >=20=0D=0A> > [root@engine =CB=9C]#=0D=0A> > /usr/share/o=
virt-engine/services/ovirt-websocket-proxy/ovirt-websocket-proxy.py=0D=0A=
> > --debug start=0D=0A> > ovirt-websocket-proxy[1838] DEBUG _daemon:403 =
daemon entry pid=3D1838=0D=0A> > ovirt-websocket-proxy[1838] DEBUG _daemo=
n:404 background=3DFalse=0D=0A> > ovirt-websocket-proxy[1838] DEBUG loadF=
ile:70 loading config=0D=0A> > '/usr/share/ovirt-engine/services/ovirt-we=
bsocket-proxy/ovirt-websocket-proxy.conf'=0D=0A> > ovirt-websocket-proxy[=
1838] DEBUG loadFile:70 loading config=0D=0A> > '/etc/ovirt-engine/ovirt-=
websocket-proxy.conf.d/10-setup.conf'=0D=0A> > ovirt-websocket-proxy[1838=
] DEBUG _daemon:440 I am a daemon 1838=0D=0A> > ovirt-websocket-proxy[183=
8] DEBUG _setLimits:377 Setting rlimits=0D=0A> > WebSocket server setting=
s:=0D=0A> > - Listen on *:6100=0D=0A>=20=0D=0A> The WebSocketProxy is lis=
tening on all the available IPs, so no problems on that side.=0D=0A>=20=0D=
=0A> > - Flash security policy server=0D=0A> > - SSL/TLS support=0D=0A> >=
- Deny non-SSL/TLS connections=0D=0A> > - proxying from *:6100 to target=
s in /dummy=0D=0A> >=20=0D=0A> > 1: 10.42.0.1: new handler Process=0D=0A>=
> 1: 10.42.0.1: SSL/TLS (wss://) WebSocket connection=0D=0A> > 1: 10.42.=
0.1: Version hybi-13, base64: 'True'=0D=0A> > 1: 10.42.0.1: Path:=0D=0A> =
> '/eyJ2YWxpZFRvIjoiMjAxNDExMTUyMTI1MDgiLCJkYXRhIjoiJTdCJTIyaG9zdCUyMjolM=
jIxMC40Mi4wLjEwMyUyMiwlMjJwb3J0JTIyOiUyMjU5MDElMjIsJTIyc3NsX3RhcmdldCUyMj=
pmYWxzZSU3RCIsInZhbGlkRnJvbSI6IjIwMTQxMTE1MjEyMzA4Iiwic2lnbmVkRmllbGRzIjo=
idmFsaWRUbyxkYXRhLHZhbGlkRnJvbSxzYWx0Iiwic2lnbmF0dXJlIjoiajRQUmxwYjBvT0dO=
ZUNPaHZKK01wUTVrVGRMYVA0Sm8zRDIzTGlXRlZYRm4xNU9KN0NZVmw5OTBpNTBUNzlVZkpqU=
zRlRmZ1SHJhT1c4TlFNbXIwanZXSUpTWCtnL3RYSnc4MWRFS2wrcFVPVHo3MWlmY2dTbXdITm=
ptOUkwTTl6Q0NNR2dvbE1BRzZwMndFbDFySDdSZkhMWnIvOGo4bnpnVGZ0NlhaOTdBcHgyejh=
kMlo0UjRmdklXemtXMjErMDdsNWw4dXpNVytEM1FmaWdDS1Q3V3VKdlFHNi9SSC9zZWRBWHJX=
cnFUNXYzTHNuNVl0MWtYb2lGV3ZYOHNUdE5PdGdvQWk3eGN5WUhGaEM1ei9SMjZXNEkrSlJNc=
DZlVDNxbWVlZnM0eWRSN0NpZWwzZWZvZDB5TU9meGJwMG9EMGlscXVWUWVjK1JxeGxqd21ZVG=
5BPT0iLCJzYWx0IjoiWGhVQ1dYL2hQU1U9In0=3D'=0D=0A> > 1: connecting to: 10.4=
2.0.103:5901=0D=0A>=20=0D=0A> The engine is instructing the WebSocket pro=
xy to connect to the host on the wrong IP address.=0D=0A> Are you using a=
n all-in-one setup where the engine, KVM and the websocketproxy are on a =
single machine=3F=0D=0A> Can you please check how the engine machine reso=
lve the host name=3F=0D=0A>=20=0D=0A>=20=0D=0A> > 1: handler exception: [=
Errno 111] Connection refused=0D=0A> > 1: Traceback (most recent call las=
t):=0D=0A> > File "/usr/lib/python2.6/site-packages/websockify/websocket.=
py", line 711, in=0D=0A> > top_new_client=0D=0A> > self.new_client()=0D=0A=
> > File "/usr/lib/python2.6/site-packages/websockify/websocketproxy.py",=
line=0D=0A> > 183, in new_client=0D=0A> > connect=3DTrue, use_ssl=3Dself=
=2Essl_target, unix_socket=3Dself.unix_target)=0D=0A> > File "/usr/lib/py=
thon2.6/site-packages/websockify/websocket.py", line 188, in=0D=0A> > soc=
ket=0D=0A> > sock.connect(addrs[0][4])=0D=0A> > File "<string>", line 1, =
in connect=0D=0A> > error: [Errno 111] Connection refused=0D=0A> >=20=0D=0A=
> >=20=0D=0A> > Regards,=0D=0A> >=20=0D=0A> > mots=0D=0A> >=20=0D=0A> > _=
______________________________________________=0D=0A> > Users mailing lis=
t=0D=0A> > Users(a)ovirt.org <mailto:Users@ovirt.org>=20=0D=0A> > http://li=
sts.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/list=
info/users>=20=0D=0A> >=20=0D=0A>=20=0D=0A=0D=0A
--=_B2Bqz28RlRkiQt0tI2lBQMQUJD-DsqIJ4LiGs35u4K91tsvv
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
=0D=0A<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "htt=
p://www.w3.org/TR/html4/loose.dtd"><html>=0D=0A<head>=0D=0A <meta name=3D=
"Generator" content=3D"Zarafa WebApp v7.1.10-44973">=0D=0A <meta http-eq=
uiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">=0D=0A <titl=
e>AW: [ovirt-users] ovirt-websocket-proxy uses the wrong IP</title>=0D=0A=
</head>=0D=0A<body>=0D=0A<font face=3D"tahoma" size=3D"2">Thank you for y=
our reply.<br><br>The engine resolves the node's IP correctly. A few deta=
ils about the setup: It's a two node cluster with shared, internal storag=
e using DRBD. The storage is managed by pacemaker, so that the node which=
currently serves as iscsi target gets assigned the additional IP. <br>Th=
e Engine/websocket-proxy then always connects to the storage IP when it a=
ttempts to connect to the node which currently functions as iscsi target.=
This only happens in oVirt 3.5, and I was able to "fix" it by going back=
to 3.4.<br></font><pre style=3D"white-space: -moz-pre-wrap; white-space:=
-pre-wrap; white-space: -o-pre-wrap; white-space: pre-wrap; word-wrap: b=
reak-word;" wrap=3D"">Regards,<br><br>mots<br> <br>-----Urspr=C3=BCnglich=
e Nachricht-----<br>> Von:Simone Tiraboschi <<a href=3D"mailto:stir=
abos(a)redhat.com">stirabos(a)redhat.com</a>><br>> Gesendet: Mon 17 Nov=
ember 2014 18:11<br>> An: Patrick Lottenbach <<a href=3D"mailto:pl@=
a-bot.ch">pl(a)a-bot.ch</a>><br>> CC: <a href=3D"mailto:users@ovirt.o=
rg">users(a)ovirt.org</a><br>> Betreff: Re: [ovirt-users] ovirt-websocke=
t-proxy uses the wrong IP<br>> <br>> <br>> <br>> <br>> <br=
>> ----- Original Message -----<br>> > From: "mots" <<a href=3D=
"mailto:mots@nepu.moe">mots(a)nepu.moe</a>><br>> > To: <a href=3D"=
mailto:users@ovirt.org">users(a)ovirt.org</a><br>> > Sent: Saturday, =
November 15, 2014 10:24:29 PM<br>> > Subject: [ovirt-users] ovirt-w=
ebsocket-proxy uses the wrong IP<br>> > <br>> > ovirt-websock=
et-proxy uses the wrong IP Hello,<br>> > <br>> > One of my no=
des has two IP addresses, 10.42.0.101 and 10.42.0.103. Ovirt is<br>> &=
gt; configured to use 10.42.0.101, yet the ovirt-websocket-proxy service =
tries<br>> > to connect to 10.42.0.103, where no VNC server is list=
ening.<br>> > <br>> > Is there any way I can configure it to =
use the correct address=3F<br>> > <br>> > [root@engine =CB=9C=
]#<br>> > /usr/share/ovirt-engine/services/ovirt-websocket-proxy/ov=
irt-websocket-proxy.py<br>> > --debug start<br>> > ovirt-webs=
ocket-proxy[1838] DEBUG _daemon:403 daemon entry pid=3D1838<br>> > =
ovirt-websocket-proxy[1838] DEBUG _daemon:404 background=3DFalse<br>> =
> ovirt-websocket-proxy[1838] DEBUG loadFile:70 loading config<br>>=
> '/usr/share/ovirt-engine/services/ovirt-websocket-proxy/ovirt-webso=
cket-proxy.conf'<br>> > ovirt-websocket-proxy[1838] DEBUG loadFile:=
70 loading config<br>> > '/etc/ovirt-engine/ovirt-websocket-proxy.c=
onf.d/10-setup.conf'<br>> > ovirt-websocket-proxy[1838] DEBUG _daem=
on:440 I am a daemon 1838<br>> > ovirt-websocket-proxy[1838] DEBUG =
_setLimits:377 Setting rlimits<br>> > WebSocket server settings:<br=
>> > - Listen on *:6100<br>> <br>> The WebSocketProxy is list=
ening on all the available IPs, so no problems on that side.<br>> <br>=
> > - Flash security policy server<br>> > - SSL/TLS support<b=
r>> > - Deny non-SSL/TLS connections<br>> > - proxying from *=
:6100 to targets in /dummy<br>> > <br>> > 1: 10.42.0.1: new h=
andler Process<br>> > 1: 10.42.0.1: SSL/TLS (wss://) WebSocket conn=
ection<br>> > 1: 10.42.0.1: Version hybi-13, base64: 'True'<br>>=
> 1: 10.42.0.1: Path:<br>> > '/eyJ2YWxpZFRvIjoiMjAxNDExMTUyMTI1=
MDgiLCJkYXRhIjoiJTdCJTIyaG9zdCUyMjolMjIxMC40Mi4wLjEwMyUyMiwlMjJwb3J0JTIyO=
iUyMjU5MDElMjIsJTIyc3NsX3RhcmdldCUyMjpmYWxzZSU3RCIsInZhbGlkRnJvbSI6IjIwMT=
QxMTE1MjEyMzA4Iiwic2lnbmVkRmllbGRzIjoidmFsaWRUbyxkYXRhLHZhbGlkRnJvbSxzYWx=
0Iiwic2lnbmF0dXJlIjoiajRQUmxwYjBvT0dOZUNPaHZKK01wUTVrVGRMYVA0Sm8zRDIzTGlX=
RlZYRm4xNU9KN0NZVmw5OTBpNTBUNzlVZkpqUzRlRmZ1SHJhT1c4TlFNbXIwanZXSUpTWCtnL=
3RYSnc4MWRFS2wrcFVPVHo3MWlmY2dTbXdITmptOUkwTTl6Q0NNR2dvbE1BRzZwMndFbDFySD=
dSZkhMWnIvOGo4bnpnVGZ0NlhaOTdBcHgyejhkMlo0UjRmdklXemtXMjErMDdsNWw4dXpNVyt=
EM1FmaWdDS1Q3V3VKdlFHNi9SSC9zZWRBWHJXcnFUNXYzTHNuNVl0MWtYb2lGV3ZYOHNUdE5P=
dGdvQWk3eGN5WUhGaEM1ei9SMjZXNEkrSlJNcDZlVDNxbWVlZnM0eWRSN0NpZWwzZWZvZDB5T=
U9meGJwMG9EMGlscXVWUWVjK1JxeGxqd21ZVG5BPT0iLCJzYWx0IjoiWGhVQ1dYL2hQU1U9In=
0=3D'<br>> > 1: connecting to: 10.42.0.103:5901<br>> <br>> Th=
e engine is instructing the WebSocket proxy to connect to the host on the=
wrong IP address.<br>> Are you using an all-in-one setup where the en=
gine, KVM and the websocketproxy are on a single machine=3F<br>> Can y=
ou please check how the engine machine resolve the host name=3F<br>> <=
br>> <br>> > 1: handler exception: [Errno 111] Connection refuse=
d<br>> > 1: Traceback (most recent call last):<br>> > File "/=
usr/lib/python2.6/site-packages/websockify/websocket.py", line 711, in<br=
>> > top_new_client<br>> > self.new_client()<br>> > Fil=
e "/usr/lib/python2.6/site-packages/websockify/websocketproxy.py", line<b=
r>> > 183, in new_client<br>> > connect=3DTrue, use_ssl=3Dsel=
f.ssl_target, unix_socket=3Dself.unix_target)<br>> > File "/usr/lib=
/python2.6/site-packages/websockify/websocket.py", line 188, in<br>> &=
gt; socket<br>> > sock.connect(addrs[0][4])<br>> > File "<=
string>", line 1, in connect<br>> > error: [Errno 111] Connectio=
n refused<br>> > <br>> > <br>> > Regards,<br>> > =
<br>> > mots<br>> > <br>> > ___________________________=
____________________<br>> > Users mailing list<br>> > <a href=
=3D"mailto:Users@ovirt.org">Users(a)ovirt.org</a><br>> > <a href=3D"h=
ttp://lists.ovirt.org/mailman/listinfo/users" target=3D"_blank">http://li=
sts.ovirt.org/mailman/listinfo/users</a><br>> > <br>> </pre>=0D=0A=
</body>=0D=0A</html>
--=_B2Bqz28RlRkiQt0tI2lBQMQUJD-DsqIJ4LiGs35u4K91tsvv--
------=_Part_36_779334652.1416253714037
Content-Type: application/pgp-signature; name=signature.asc
Content-Transfer-Encoding: 7bit
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----
Version: CIPHERMAIL (2.8.6-4)
iQEcBAEBCAAGBQJUalESAAoJELfzdzVzTtoKeF0H/1YQt1E5Xa6ddb/QDmr+a0xm
l0YZi8SP2bDvKsktd5u1skXpXp5BMhYYQL77P9/dvg/nUudz5Pv+MNLtMc/VeWoS
X46jIJBsL8l+eg5hTa/LocJZ2mBRkZnbwSYUuNKFNrHc7hDhWXwNBZsObrXsBQIK
4wllZgmAhm+yUxX2S2oWDRF76XkuSnQdGLjVHySfrD4/ko39+hQyOZWjKNFUlNB2
WXwfI6xurJDccVWW9wLndt6JO8s2uKf2NcDLSDaY1abi2gFEqx1iIFxY3v4YV+LT
tIc4HwK/BqE+HusOVAxLL20tvV4ki+2/2g4jsYmXjpPYyWByLspV1IcHKnbtbpw=
=u///
-----END PGP SIGNATURE-----
------=_Part_36_779334652.1416253714037--
10 years, 5 months
ovirt-websocket-proxy uses the wrong IP
by mots
------=_Part_27_1351307630.1416086778054
Content-Type: multipart/alternative;
boundary="=_diYpkdcCc+XflEeiQy00J5SerIjuuCS5jgM5BJ73AfiuYSQ8"
This is a multi-part message in MIME format. Your mail reader does not
understand MIME message format.
--=_diYpkdcCc+XflEeiQy00J5SerIjuuCS5jgM5BJ73AfiuYSQ8
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Hello,=0D=0A=0D=0AOne of my nodes has two IP addresses, 10.42.0.101 and 1=
0.42.0.103. Ovirt is configured to use 10.42.0.101, yet the ovirt-websock=
et-proxy service tries to connect to 10.42.0.103, where no VNC server is =
listening.=0D=0A=0D=0AIs there any way I can configure it to use the corr=
ect address=3F=0D=0A=0D=0A[root@engine ~]# /usr/share/ovirt-engine/servic=
es/ovirt-websocket-proxy/ovirt-websocket-proxy.py --debug start=0D=0Aovir=
t-websocket-proxy[1838] DEBUG _daemon:403 daemon entry pid=3D1838=0D=0Aov=
irt-websocket-proxy[1838] DEBUG _daemon:404 background=3DFalse=0D=0Aovirt=
-websocket-proxy[1838] DEBUG loadFile:70 loading config '/usr/share/ovirt=
-engine/services/ovirt-websocket-proxy/ovirt-websocket-proxy.conf'=0D=0Ao=
virt-websocket-proxy[1838] DEBUG loadFile:70 loading config '/etc/ovirt-e=
ngine/ovirt-websocket-proxy.conf.d/10-setup.conf'=0D=0Aovirt-websocket-pr=
oxy[1838] DEBUG _daemon:440 I am a daemon 1838=0D=0Aovirt-websocket-proxy=
[1838] DEBUG _setLimits:377 Setting rlimits=0D=0AWebSocket server setting=
s:=0D=0A=C2=A0 - Listen on *:6100=0D=0A=C2=A0 - Flash security policy ser=
ver=0D=0A=C2=A0 - SSL/TLS support=0D=0A=C2=A0 - Deny non-SSL/TLS connecti=
ons=0D=0A=C2=A0 - proxying from *:6100 to targets in /dummy=0D=0A=0D=0A=C2=
=A0 1: 10.42.0.1: new handler Process=0D=0A=C2=A0 1: 10.42.0.1: SSL/TLS (=
wss://) WebSocket connection=0D=0A=C2=A0 1: 10.42.0.1: Version hybi-13, b=
ase64: 'True'=0D=0A=C2=A0 1: 10.42.0.1: Path: '/eyJ2YWxpZFRvIjoiMjAxNDExM=
TUyMTI1MDgiLCJkYXRhIjoiJTdCJTIyaG9zdCUyMjolMjIxMC40Mi4wLjEwMyUyMiwlMjJwb3=
J0JTIyOiUyMjU5MDElMjIsJTIyc3NsX3RhcmdldCUyMjpmYWxzZSU3RCIsInZhbGlkRnJvbSI=
6IjIwMTQxMTE1MjEyMzA4Iiwic2lnbmVkRmllbGRzIjoidmFsaWRUbyxkYXRhLHZhbGlkRnJv=
bSxzYWx0Iiwic2lnbmF0dXJlIjoiajRQUmxwYjBvT0dOZUNPaHZKK01wUTVrVGRMYVA0Sm8zR=
DIzTGlXRlZYRm4xNU9KN0NZVmw5OTBpNTBUNzlVZkpqUzRlRmZ1SHJhT1c4TlFNbXIwanZXSU=
pTWCtnL3RYSnc4MWRFS2wrcFVPVHo3MWlmY2dTbXdITmptOUkwTTl6Q0NNR2dvbE1BRzZwMnd=
FbDFySDdSZkhMWnIvOGo4bnpnVGZ0NlhaOTdBcHgyejhkMlo0UjRmdklXemtXMjErMDdsNWw4=
dXpNVytEM1FmaWdDS1Q3V3VKdlFHNi9SSC9zZWRBWHJXcnFUNXYzTHNuNVl0MWtYb2lGV3ZYO=
HNUdE5PdGdvQWk3eGN5WUhGaEM1ei9SMjZXNEkrSlJNcDZlVDNxbWVlZnM0eWRSN0NpZWwzZW=
ZvZDB5TU9meGJwMG9EMGlscXVWUWVjK1JxeGxqd21ZVG5BPT0iLCJzYWx0IjoiWGhVQ1dYL2h=
QU1U9In0=3D'=0D=0A=C2=A0 1: connecting to: 10.42.0.103:5901=0D=0A=C2=A0 1=
: handler exception: [Errno 111] Connection refused=0D=0A=C2=A0 1: Traceb=
ack (most recent call last):=0D=0A=C2=A0 File "/usr/lib/python2.6/site-pa=
ckages/websockify/websocket.py", line 711, in top_new_client=0D=0A=C2=A0=C2=
=A0=C2=A0 self.new_client()=0D=0A=C2=A0 File "/usr/lib/python2.6/site-pac=
kages/websockify/websocketproxy.py", line 183, in new_client=0D=0A=C2=A0=C2=
=A0=C2=A0 connect=3DTrue, use_ssl=3Dself.ssl_target, unix_socket=3Dself.u=
nix_target)=0D=0A=C2=A0 File "/usr/lib/python2.6/site-packages/websockify=
/websocket.py", line 188, in socket=0D=0A=C2=A0=C2=A0=C2=A0 sock.connect(=
addrs[0][4])=0D=0A=C2=A0 File "<string>", line 1, in connect=0D=0Aerror: =
[Errno 111] Connection refused=0D=0A=0D=0A=0D=0ARegards,=0D=0A=0D=0Amots=0D=
=0A
--=_diYpkdcCc+XflEeiQy00J5SerIjuuCS5jgM5BJ73AfiuYSQ8
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
=0D=0A<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "htt=
p://www.w3.org/TR/html4/loose.dtd"><html>=0D=0A<head>=0D=0A <meta name=3D=
"Generator" content=3D"Zarafa WebApp v7.1.10-44973">=0D=0A <meta http-eq=
uiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">=0D=0A <titl=
e>ovirt-websocket-proxy uses the wrong IP</title>=0D=0A</head>=0D=0A<body=
>=0D=0A<font size=3D"2" face=3D"tahoma">Hello,<br><br>One of my nodes </f=
ont><font size=3D"2" face=3D"tahoma">has two IP addresses, 10.42.0.101 an=
d 10.42.0.103. Ovirt is configured to use 10.42.0.101, yet the ovirt-webs=
ocket-proxy service tries to connect to 10.42.0.103, where no VNC server =
is listening.<br><br>Is there any way I can configure it to use the corre=
ct address=3F<br><br>[root@engine ~]# /usr/share/ovirt-engine/services/ov=
irt-websocket-proxy/ovirt-websocket-proxy.py --debug start<br>ovirt-webso=
cket-proxy[1838] DEBUG _daemon:403 daemon entry pid=3D1838<br>ovirt-webso=
cket-proxy[1838] DEBUG _daemon:404 background=3DFalse<br>ovirt-websocket-=
proxy[1838] DEBUG loadFile:70 loading config '/usr/share/ovirt-engine/ser=
vices/ovirt-websocket-proxy/ovirt-websocket-proxy.conf'<br>ovirt-websocke=
t-proxy[1838] DEBUG loadFile:70 loading config '/etc/ovirt-engine/ovirt-w=
ebsocket-proxy.conf.d/10-setup.conf'<br>ovirt-websocket-proxy[1838] DEBUG=
_daemon:440 I am a daemon 1838<br>ovirt-websocket-proxy[1838] DEBUG _set=
Limits:377 Setting rlimits<br>WebSocket server settings:<br> - List=
en on *:6100<br> - Flash security policy server<br> - SSL/TLS=
support<br> - Deny non-SSL/TLS connections<br> - proxying fr=
om *:6100 to targets in /dummy<br><br> 1: 10.42.0.1: new handler Pr=
ocess<br> 1: 10.42.0.1: SSL/TLS (wss://) WebSocket connection<br>&n=
bsp; 1: 10.42.0.1: Version hybi-13, base64: 'True'<br> 1: 10.42.0.1=
: Path: '/eyJ2YWxpZFRvIjoiMjAxNDExMTUyMTI1MDgiLCJkYXRhIjoiJTdCJTIyaG9zdCU=
yMjolMjIxMC40Mi4wLjEwMyUyMiwlMjJwb3J0JTIyOiUyMjU5MDElMjIsJTIyc3NsX3Rhcmdl=
dCUyMjpmYWxzZSU3RCIsInZhbGlkRnJvbSI6IjIwMTQxMTE1MjEyMzA4Iiwic2lnbmVkRmllb=
GRzIjoidmFsaWRUbyxkYXRhLHZhbGlkRnJvbSxzYWx0Iiwic2lnbmF0dXJlIjoiajRQUmxwYj=
BvT0dOZUNPaHZKK01wUTVrVGRMYVA0Sm8zRDIzTGlXRlZYRm4xNU9KN0NZVmw5OTBpNTBUNzl=
VZkpqUzRlRmZ1SHJhT1c4TlFNbXIwanZXSUpTWCtnL3RYSnc4MWRFS2wrcFVPVHo3MWlmY2dT=
bXdITmptOUkwTTl6Q0NNR2dvbE1BRzZwMndFbDFySDdSZkhMWnIvOGo4bnpnVGZ0NlhaOTdBc=
HgyejhkMlo0UjRmdklXemtXMjErMDdsNWw4dXpNVytEM1FmaWdDS1Q3V3VKdlFHNi9SSC9zZW=
RBWHJXcnFUNXYzTHNuNVl0MWtYb2lGV3ZYOHNUdE5PdGdvQWk3eGN5WUhGaEM1ei9SMjZXNEk=
rSlJNcDZlVDNxbWVlZnM0eWRSN0NpZWwzZWZvZDB5TU9meGJwMG9EMGlscXVWUWVjK1JxeGxq=
d21ZVG5BPT0iLCJzYWx0IjoiWGhVQ1dYL2hQU1U9In0=3D'<br> 1: connecting t=
o: 10.42.0.103:5901<br> 1: handler exception: [Errno 111] Connectio=
n refused<br> 1: Traceback (most recent call last):<br> File =
"/usr/lib/python2.6/site-packages/websockify/websocket.py", line 711, in =
top_new_client<br> self.new_client()<br> File "/u=
sr/lib/python2.6/site-packages/websockify/websocketproxy.py", line 183, i=
n new_client<br> connect=3DTrue, use_ssl=3Dself.ssl_tar=
get, unix_socket=3Dself.unix_target)<br> File "/usr/lib/python2.6/s=
ite-packages/websockify/websocket.py", line 188, in socket<br>  =
; sock.connect(addrs[0][4])<br> File "<string>", line 1=
, in connect<br>error: [Errno 111] Connection refused<br><br><br>Regards,=
<br><br>mots<br></font>=0D=0A</body>=0D=0A</html>
--=_diYpkdcCc+XflEeiQy00J5SerIjuuCS5jgM5BJ73AfiuYSQ8--
------=_Part_27_1351307630.1416086778054
Content-Type: application/pgp-signature; name=signature.asc
Content-Transfer-Encoding: 7bit
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----
Version: CIPHERMAIL (2.8.6-4)
iQEcBAEBCAAGBQJUZ8T6AAoJELfzdzVzTtoK3K0H/2O2w3FZAvdP+AxXEzwrZIMR
W9dBZ8yuX3gyhzu5LdANuu4BVjMStfJ1bK4VdWyyp2DquR5hVtbBv1C3obBquDok
rxByShXWm5YdVvWaDzxHiUtTuIqy0vqfQgp8KDHRUOubhqSEfqHFuAs/GOLJqlSv
x/mo4lSrQ5IK+OiNh83fEw+S9Y5O5lems0IT3XQH6xRR7YBP0Dt0b4Rdg+qSt9GH
3VYFnxbYAY7mp7tCQPJUGSBwuclOMNgHLSGa9FapFKnFm6+ionXCuEoQFc19F7z4
u5QrogtXjTAqp26/VKW1RiSkgtbQZhLHz8xYQAuav6VKALpwTaGOwLKN4O+jYo4=
=Tx0F
-----END PGP SIGNATURE-----
------=_Part_27_1351307630.1416086778054--
10 years, 5 months
can't create new disk for vm
by Nathanaël Blanchet
Hi all,
Since I upgraded engine to 3.5, I can't add new disk anymore to
existant vms, none than create a new vm with a new disk. Clicking on OK
button after the disk definition does nothing. I tried many situations
(preallocated or thin provision) or changing of storage domain, but it
is the same. Has anybody encountered the same issue?
10 years, 5 months
noVNC problems after upgrading to 3.5.0
by Darrell Budic
I had noVNC working under 3.4, but can’t seem to get it back up after updating to 3.5.0. VNC is working if I make direct connections, but it looks like the web socket proxy never tries to connect to the host server. noVNC is just reporting then generic 1006 error. Firefox reports it already has the right ca.crt installed, so it’s not that. From watching the network, it looks like it never gets authenticated properly to the web proxy, and never tries to connect on from there.
Any way to get some debugging info for the web socket proxy? Not locating any in the usual log files when I try this…
Anyone else seeing a similar problem?
-Darrell
10 years, 5 months
Strange error messages
by Demeter Tibor
------=_Part_3534596_2072970975.1416207306635
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Hi,
In this morning I have got a lot of similar messages to console:
2014-Nov-17, 03:21
Detected conflict in hook set-POST-30samba-set.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Detected conflict in hook stop-PRE-29CTDB-teardown.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Detected conflict in hook add-brick-PRE-28Quota-enable-root-xattr-heal.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Detected conflict in hook set-POST-31ganesha-set.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Detected conflict in hook start-POST-30samba-start.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Detected conflict in hook reset-POST-31ganesha-reset.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Detected conflict in hook gsync-create-POST-56glusterd-geo-rep-create-post.sh of Cluster r710cluster1.
What does this mean?
The system seems to be working.
Thanks:
Tibor
------=_Part_3534596_2072970975.1416207306635
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: times new roman, new york, times, se=
rif; font-size: 12pt; color: #000000"><div>Hi, <br></div><div><br></div><di=
v>In this morning I have got a lot of similar messages to console: <br></di=
v><div><br></div><div> <br>2=
014-Nov-17, 03:21 <br> <br>D=
etected conflict in hook set-POST-30samba-set.sh of Cluster r710cluster1. <=
br></div><div><br></div><div> &nbs=
p;<br>2014-Nov-17, 03:21 <br> &nbs=
p;<br>Detected conflict in hook stop-PRE-29CTDB-teardown.sh of Cluster r710=
cluster1. <br></div><div><br></div><div>  =
; <br>2014-Nov-17, 03:21 <br>  =
; <br>Detected conflict in hook add-brick-PRE-28Quota-enable-roo=
t-xattr-heal.sh of Cluster r710cluster1. <br></div><div><br></div><div>&nbs=
p; <br>2014-Nov-17, 03:21 <br>&nbs=
p; <br>Detected conflict in hook s=
et-POST-31ganesha-set.sh of Cluster r710cluster1. <br></div><div><br></div>=
<div> <br>2014-Nov-17, 03:21=
<br> <br>Detected conflict =
in hook start-POST-30samba-start.sh of Cluster r710cluster1. <br></div><div=
><br></div><div> <br>2014-No=
v-17, 03:21 <br> <br>Detecte=
d conflict in hook reset-POST-31ganesha-reset.sh of Cluster r710cluster1. <=
br></div><div><br></div><div> &nbs=
p;<br>2014-Nov-17, 03:21 <br> &nbs=
p;<br>Detected conflict in hook gsync-create-POST-56glusterd-geo-rep-create=
-post.sh of Cluster r710cluster1. <br></div><div><br></div><div><br></div><=
div><br></div><div>What does this mean? <br></div><div><br></div><div>The s=
ystem seems to be working. <br></div><div><br></div><div>Thanks: <br></div>=
<div><br></div><div>Tibor<br></div><div><br></div><div><br></div></div></bo=
dy></html>
------=_Part_3534596_2072970975.1416207306635--
10 years, 5 months
(no subject)
by Harald Wolf
------4LN2OR9JATJU5K23NU8D9SLWFUMB8P
Content-Type: text/plain;
charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Hi,
is the hardware of a Host (oVirt Node/Hypervisor) responslible for the bes=
t possible computing power of the console users?
--=20
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesende=
t=2E
------4LN2OR9JATJU5K23NU8D9SLWFUMB8P
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: quoted-printable
Hi,<br>
is the hardware of a Host (oVirt Node/Hypervisor) responslible for the bes=
t possible computing power of the console users?<br>
<br>
-- <br>
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesende=
t=2E
------4LN2OR9JATJU5K23NU8D9SLWFUMB8P--
10 years, 5 months
