Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
by Alon Bar-Lev
----- Original Message -----
> From: "Juan Jose" <jj197005(a)gmail.com>
> To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" <yzaslavs(a)redhat.com>
> Sent: Wednesday, December 10, 2014 12:30:34 PM
> Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
>
> Hello Alon and Yair,
>
> Many thanks for your help, finally It works properly. My problem, after
> last Alon indications was that my user "Juanjo" was defined with SuperUser
> role in the previous domain configuration. I have loggen in with admin user
> from internal and I have removed old configuration and I have configured my
> user "Juanjo" with all administrators roles in folder "Permission" and I
> can log in in administration portal without problems and it works properly.
>
> My final configuration I have is an emulated *AD based on Samba 4* and the
> final configuration files are:
Good!
So samba is not emulating active directory entirely :)
But good to know it is working.
Please also checkout group membership.
> ovirt-engine-extension-aaa-ldap.noarch
> 1.0.1-0.0.master.20141209141731.git0437701.el6
this fix for samba ad will be released in 1.0.1.
>
> */etc/ovirt-engine/extensions.d/siee-local-authn.properties*:
>
> ovirt.engine.extension.name = siee-local-authn
> ovirt.engine.extension.bindings.method = jbossmodule
> ovirt.engine.extension.binding.jbossmodule.module =
> org.ovirt.engine-extensions.aaa.ldap
> ovirt.engine.extension.binding.jbossmodule.class =
> org.ovirt.engineextensions.aaa.ldap.AuthnExtension
> ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn
> ovirt.engine.aaa.authn.profile.name = siee
> ovirt.engine.aaa.authn.authz.plugin = siee-local-authz
> config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties
>
> */etc/ovirt-engine/extensions.d/siee-local-authz.properties*:
>
> ovirt.engine.extension.name = siee-local-authz
> ovirt.engine.extension.bindings.method = jbossmodule
> ovirt.engine.extension.binding.jbossmodule.module =
> org.ovirt.engine-extensions.aaa.ldap
> ovirt.engine.extension.binding.jbossmodule.class =
> org.ovirt.engineextensions.aaa.ldap.AuthzExtension
> ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz
> config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties
>
> */etc/ovirt-engine/aaa/siee.properties*:
>
> include = <ad.properties>
>
> #
> # Active directory domain name.
> #
> vars.domain = siee.local
>
> #
> # Search user and its password.
> #
> vars.user = searcher@${global:vars.domain}
> vars.password = xxxx
>
> #
> # Optional DNS servers, if enterprise
> # DNS server cannot resolve the domain srvrecord.
> #
> #vars.dns = dns://dc1.${global:vars.domain} dns://dc2.${global:vars.domain}
>
> pool.default.serverset.type = srvrecord
> pool.default.serverset.srvrecord.domain = ${global:vars.domain}
> pool.default.auth.simple.bindDN = ${global:vars.user}
> pool.default.auth.simple.password = ${global:vars.password}
>
> # Uncomment if using custom DNS
> #pool.default.serverset.srvrecord.jndi-properties.java.naming.provider.url
> = ${global:vars.dns}
> #pool.default.socketfactory.resolver.uRL = ${global:vars.dns}
>
> # Create keystore, import certificate chain and uncomment
> # if using ssl/tls.
> #pool.default.ssl.startTLS = true
> #pool.default.ssl.truststore.file =
> ${local:_basedir}/${global:vars.domain}.jks
> #pool.default.ssl.truststore.password = changeit
You should enable SSL for production use... as you do not want passwords to be transmitted in clear.
Not sure how you install ssl on the samba ldap... but once you do, follow the README instructions[1]
[1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=bl...
>
> */etc/krb5.conf*:
You are not using kerberos, so there is no reason to configure it for setup to work.
>
> [logging]
> default = FILE:/var/log/krb5libs.log
> kdc = FILE:/var/log/krb5kdc.log
> admin_server = FILE:/var/log/kadmind.log
>
> [libdefaults]
> default_realm = SIEE.LOCAL
> dns_lookup_realm = true
> dns_lookup_kdc = true
> ticket_lifetime = 24h
> renew_lifetime = 7d
> forwardable = no
> default_tkt_enctypes = arcfour-hmac-md5
> udp_preference_limit = 1
>
> #[realms]
>
> #[domain_realm]
> # .siee.local = SIEE.LOCAL
> # siee.local = SIEE.LOCAL
>
>
> Many thanks again to everybody,
>
> Juanjo.
>
> On Tue, Dec 9, 2014 at 5:31 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Juan Jose" <jj197005(a)gmail.com>
> > > To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" <
> > yzaslavs(a)redhat.com>
> > > Sent: Tuesday, December 9, 2014 5:42:56 PM
> > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
> > >
> > > Hello Alon,
> > >
> > > In my firsts e-mails I had already said that I have an emulation of AD
> > > based on Samba 4. I have tested the last version ov
> > > ovirt-engine-extension-aaa-ldap package and I think the problem is the
> > same
> > > although the error is "User is not authorized to perform this action".
> > >
> > > I attach the enginle.log.
> >
> > USER_NOT_AUTHORIZED_TO_PERFORM_ACTION means user is not superuser or can
> > manage objects as far as I know.
> >
> > I see siee0(a)siee.local is trying to login which is CN=siee0
> > siee0,CN=Users,DC=siee,DC=local
> >
> > Login succeeds.
> >
> > I do not see any groups it belongs to.
> >
> > Are you sure you added this user role within the webadmin or that user
> > belongs to groups that were added to engine with such roles?
> >
> > >
> > > In case that the new oVirt version 3.5 doesn't work with an AD emulation
> > > based on Samba 4, is it possible to do user authentication with an
> > OpenLDAP
> > > directly with this 3.5 version?, if it is so, could you give me the link
> > to
> > > the documentation to configure OpenLDAP authentication?
> >
> > Sure, just use the
> > /usr/share/ovirt-engine-extension-aaa-ldap/examples/simple copy recursive
> > into /etc/ovirt-engine, then modify /etc/ovirt-engine/aaa/ldap1.properties
> > set vars.server, vars.user, vars.password.
> >
> > Until 3.5.1 you should also
> > /etc/ovirt-engine/extensions.d/domain1*.properties and replace ../aaa to
> > /etc/ovirt-engine/aaa
> >
> >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > > On Tue, Dec 9, 2014 at 3:16 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > > > > To: "Juan Jose" <jj197005(a)gmail.com>
> > > > > Cc: "users" <users(a)ovirt.org>
> > > > > Sent: Tuesday, December 9, 2014 3:59:33 PM
> > > > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
> > > > >
> > > > > We start over...
> > > > >
> > > > > This is not active directory... it is samba.
> > > > >
> > > > > Attribute(name=vendorName, values={'Samba Team (http://samba.org)'})
> > > > >
> > > > > Only now I realized this, maybe you mentioned it earlier not sure.
> > > > >
> > > > > Of course this was never tested, so probably not working.
> > > > >
> > > > > I see that samba does not return a list of extended operations, I
> > will
> > > > > workaround this and we can see what's else differ from active
> > directory.
> > > >
> > > > Can you please checkout the following rpm[1]?
> > > >
> > > > [1]
> > > >
> > http://jenkins.ovirt.org/job/ovirt-engine-extension-aaa-ldap_master_creat...
> > > >
> > >
> >
>
10 years
[QE][ACTION REQUIRED] oVirt 3.5.1 RC status
by Sandro Bonazzola
Hi,
We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed.
ACTION: Being so near to winter's holidays we need to discuss the new tentative date for RC in today sync meeting.
The bug tracker [1] shows 2 open blocker:
Bug ID Whiteboard Status Summary
1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile
1168709 virt NEW Hosted Engine VM is listed as paused after upgrading from 3.4.4 to 3.5.1 snapshot
In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC.
- ACTION: assignee please provide ETA on above blockers
Maintainers:
- Please be sure that 3.5 snapshot allow to create VMs
- Please be sure that no pending patches are going to block the release
- If any patch must block the RC release please raise the issue as soon as possible.
There are still 63 bugs [2] targeted to 3.5.1.
Excluding node and documentation bugs we still have 42 bugs [3] targeted to 3.5.1.
Maintainers / Assignee:
- Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed.
- ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1:
it will ease gathering the blocking bugs for next releases.
- ACTION: Please fill release notes, the page has been created here [4]
Community:
- If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5]
[1] http://bugzilla.redhat.com/1155170
[2] http://goo.gl/7G0PDV
[3] http://goo.gl/6gUbVr
[4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes
[5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years
3.5 hosted engine: 2nd host Cannot acquire bridge address
by Robert Story
--Sig_/LN2bw8TMIqS9=ZENrf7wXWT
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable
I've got a hosted engine up and running on a freshly installed 3.5 host
(CentOS 6.6), and I'm tyying to add a second host. The install fails trying
to configure the ovirtmgmt bridge:
[ INFO ] Updating hosted-engine configuration
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
[ ERROR ] Failed to execute stage 'Closing up': Cannot acquire bridge addre=
ss
=46rom the setup log:
2014-11-05 19:35:00 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad=
d_host add_host._closeup:434 Updating engine's management network to be vla=
nned 2014-11-05 19:35:02 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engi=
ne.add_host add_host._closeup:445 Adding the host to the cluster 2014-11-05=
19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.add_host add=
_host._getIPAddress:184 Acquiring nic address
2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad=
d_host plugin.executeRaw:785 execute: ('/sbin/ip', 'addr', 'show', 'eth1.79=
'), executable=3D'None', cwd=3D'None', env=3DNone
2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad=
d_host plugin.executeRaw:803 execute-result: ('/sbin/ip', 'addr', 'show', '=
eth1.79'), rc=3D0
2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad=
d_host plugin.execute:861 execute-output: ('/sbin/ip', 'addr', 'show', 'eth=
1.79') stdout:
4: eth1.79@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue s=
tate UP
link/ether 00:26:9e:0b:31:e5 brd ff:ff:ff:ff:ff:ff
inet 10.69.79.32/24 brd 10.69.79.255 scope global eth1.79
inet6 fe80::226:9eff:fe0b:31e5/64 scope link
valid_lft forever preferred_lft forever
2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad=
d_host plugin.execute:866 execute-output: ('/sbin/ip', 'addr', 'show', 'eth=
1.79') stderr:
2014-11-05 19:35:03 DEBUG otopi.context context._executeMethod:152 method e=
xception
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in _e=
xecuteMethod
method['method']()
File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hoste=
d-engine-setup/engine/add_host.py", line 485, in _closeup
address=3Dself._getIPAddress(),
File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hoste=
d-engine-setup/engine/add_host.py", line 199, in _getIPAddress
raise RuntimeError(_('Cannot acquire bridge address'))
RuntimeError: Cannot acquire bridge address
2014-11-05 19:35:03 ERROR otopi.context context._executeMethod:161 Failed t=
o execute stage 'Closing up': Cannot acquire bridge address
The install on the first host worked fine on a VLAN (eth1.79).
Robert
--=20
Senior Software Engineer @ Parsons
--Sig_/LN2bw8TMIqS9=ZENrf7wXWT
Content-Type: application/pgp-signature; name=signature.asc
Content-Disposition: attachment; filename=signature.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEARECAAYFAlRax2cACgkQ7/fVLLY1mngpJwCeKPtZFsr41sAJVHV6LIeK7a35
SGIAn0T47ampbAbCzcOUeUArVCYLAtzn
=YGdM
-----END PGP SIGNATURE-----
--Sig_/LN2bw8TMIqS9=ZENrf7wXWT--
10 years
Fwd: Fwd: run ovirt-shell script like background job - problem
by Grzegorz Szypa
Problem is solved.
It must be install this:
yum update packages
not like this
rpm -i *.rpm
---------- Forwarded message ----------
From: Grzegorz Szypa <grzegorz.szypa(a)gmail.com>
Date: 2014-12-09 20:42 GMT+01:00
Subject: Re: [ovirt-users] Fwd: run ovirt-shell script like background job
- problem
To: Juan Hernández <jhernand(a)redhat.com>
So i have a question:
When i install:
rpm -i ovirt-engine-sdk-python-3.5.0.7-1.el6.noarch.rpm
ovirt-engine-cli-3.5.0.5-1.el6.noarch.rpm
i got error conflict with current package ovirt-engine-3.4.x
It was all-in-one instalation in one server.
2014-12-09 10:32 GMT+01:00 Juan Hernández <jhernand(a)redhat.com>:
> On 12/08/2014 08:05 PM, Grzegorz Szypa wrote:
> > So, i have a question.
> >
> > Is ovirt-engine-cli-3.5.0.2-1.el6.noarch compatible in ovirt-engine-3.4?
> >
> > Can install ovirt-engine-cli-3.5 on ovirt-engine-cli-3.4 and using him
> > with landscape based on ovirt 3.4 ??
> >
>
> Yes, versions 3.5.x of ovirt-engine-cli and ovirt-engine-sdk-python (you
> will need both) are compatible with version 3.4 of the engine.
>
> > 2014-12-07 17:33 GMT+01:00 Juan Hernández <jhernand(a)redhat.com
> > <mailto:jhernand@redhat.com>>:
> >
> > On 12/07/2014 05:05 PM, Grzegorz Szypa wrote:
> > > Hi,
> > >
> > > I have a problem with running ovirt-shell script, that it starting
> > VMs.
> > > In dialog mode it's fine, but in background no :(
> > >
> > > Example script:
> > > ovirt-shell -E 'action vm WinSrv2012r2 start'
> > >
> > > I start this job in cron as root.
> > >
> > >
> > > Have somebody idea??
> > >
> > > --
> > > G.Sz.
> > >
> >
> > We used to have bug that made ovirt-shell fail when there wasn't a
> tty
> > available (like when running from cron):
> >
> > ovirt-shell cannot run in cron (/dev/tty missing)
> > https://bugzilla.redhat.com/1119412
> >
> > That was fixed in version 3.5.0.2, so make sure that you have at
> least
> > that version.
> >
> > If you still have problems please share the output of the ovirt-shell
> > command.
> >
> > --
> > Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
> > 3ºD, 28016 Madrid, Spain
> > Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat
> > S.L.
> >
> >
> >
> >
> > --
> > G.Sz.
> >
> >
> >
> > --
> > G.Sz.
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
> --
> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
> 3ºD, 28016 Madrid, Spain
> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
>
--
G.Sz.
--
G.Sz.
10 years
yum update command is failed
by Ilan Hirsfeld
Hi,
My name's Ilan and I'm a new user.
I installed CentOS 7 64 bit with VMware Player as guest and try 'yum
update' to get newest application and get error as mentioned below. It seem
me the installation determines the IP address as loopback and I don't know
how enable it as real/virtual.
I copy & paste the findings from Linux and Windows.
Any help will be blessed.
Regards,
Ilan.
[root@localhost Desktop]# yum update
Loaded plugins: fastestmirror, langpacks
Could not retrieve mirrorlist
http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the
problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a
working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Disable the repository, so yum won't use it by default. Yum will
then
just ignore the repository until you permanently enable it again or
use
--enablerepo for temporary usage:
yum-config-manager --disable <repoid>
4. Configure the failing repository to be skipped, if it is
unavailable.
Note that yum will try to contact the repo. when it runs most
commands,
so will have to try and fail each time (and thus. yum will be be
much
slower). If it is a very temporary problem though, this is often a
nice
compromise:
yum-config-manager --save
--setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
[root@localhost Desktop]# exit
exit
[bih016@localhost Desktop]$ ping google.com
ping: unknown host google.com
[bih016@localhost Desktop]$ ifconfig -a
eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 00:0c:29:d9:2b:57 txqueuelen 1000 (Ethernet)
RX packets 18 bytes 1080 (1.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 386 bytes 33548 (32.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 386 bytes 33548 (32.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[bih016@localhost Desktop]$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
cat /etc/sysconfig/network-scripts/ifcfg-lo
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
# If you're having problems with gated making 127.0.0.0/8 a martian,
# you can change this to something else (255.255.255.255, for example)
BROADCAST=127.255.255.255
ONBOOT=yes
NAME=loopback
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
cat /etc/*-release
CentOS Linux release 7.0.1406 (Core)
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"
CentOS Linux release 7.0.1406 (Core)
CentOS Linux release 7.0.1406 (Core)
uname -a
Linux localhost.localdomain 3.10.0-123.el7.x86_64 #1 SMP Mon Jun 30
12:09:22 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
cat /proc/version
Linux version 3.10.0-123.el7.x86_64 (builder(a)kbuilder.dev.centos.org) (gcc
version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Mon Jun 30
12:09:22 UTC 2014
C:\Users\PC User>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : PCUser-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : localdomain
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : EC-A8-6B-FA-3D-15
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . :
fe80::91aa:14b3:7d79:9b8b%11(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:15:01
Lease Expires . . . . . . . . . . : יום שלישי 09 דצמבר 2014 15:15:01
Default Gateway . . . . . . . . . : 10.0.0.138
DHCP Server . . . . . . . . . . . : 10.0.0.138
DHCPv6 IAID . . . . . . . . . . . : 250390635
DHCPv6 Client DUID. . . . . . . . :
00-01-00-01-1A-09-29-61-EC-A8-6B-FA-3D-15
DNS Servers . . . . . . . . . . . : 10.0.0.138
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . : localdomain
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . :
fe80::148:a743:e971:82b8%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.254.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:15:05
Lease Expires . . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:45:05
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 192.168.254.254
DHCPv6 IAID . . . . . . . . . . . : 335564886
DHCPv6 Client DUID. . . . . . . . :
00-01-00-01-1A-09-29-61-EC-A8-6B-FA-3D-15
DNS Servers . . . . . . . . . . . : 192.168.254.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . : localdomain
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . :
fe80::f1ec:6b17:d46d:d130%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.142.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:15:05
Lease Expires . . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:45:05
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 192.168.142.254
DHCPv6 IAID . . . . . . . . . . . : 352342102
DHCPv6 Client DUID. . . . . . . . :
00-01-00-01-1A-09-29-61-EC-A8-6B-FA-3D-15
DNS Servers . . . . . . . . . . . : 192.168.142.2
Primary WINS Server . . . . . . . : 192.168.142.2
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{DD439A41-571B-47F9-8B4A-374946CF59CA}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.localdomain:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : localdomain
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . :
2001:0:5ef5:79fb:109a:1457:f5ff:fffc(Preferred)
Link-local IPv6 Address . . . . . :
fe80::109a:1457:f5ff:fffc%14(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
10 years
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
by Alon Bar-Lev
We start over...
This is not active directory... it is samba.
Attribute(name=vendorName, values={'Samba Team (http://samba.org)'})
Only now I realized this, maybe you mentioned it earlier not sure.
Of course this was never tested, so probably not working.
I see that samba does not return a list of extended operations, I will workaround this and we can see what's else differ from active directory.
Thanks,
Alon
10 years
Don't start vm
by Roman Nikolayevich Drovalev
Ýòî ñîîáùåíèå èç íåñêîëüêèõ ÷àñòåé â ôîðìàòå MIME.
--=_alternative 0072EDDF43257DA5_=
Content-Type: text/plain; charset="US-ASCII"
Hi,
Please Help
I normal stop my virtual mashine. But not start !
in the logs
2014-12-05 09:38:06,437 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-87) Correlation ID: null, Call Stack: null,
Custom Event ID: -1, Message: VM Cent is down with error. Exit message:
('Failed to get size for volume %s',
u'fb8466c9-0867-4e73-8362-2c95eea89a83').
2014-12-05 09:38:06,439 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-87) Running on vds during rerun failed vm:
null
2014-12-05 09:38:06,447 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-87) VM Cent
(d1ccb04d-bda8-42a2-bab6-7def2f8b2a00) is running in db and not running in
VDS x3550m2down
2014-12-05 09:38:06,475 ERROR
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-87) Rerun vm
d1ccb04d-bda8-42a2-bab6-7def2f8b2a00. Called from vds x3550m2down
2014-12-05 09:38:06,482 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID:
86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c, Call Stack: null, Custom Event ID:
-1, Message: Failed to run VM Cent on Host x3550m2down
2014-12-05 09:38:06,486 INFO [org.ovirt.engine.core.bll.RunVmCommand]
(org.ovirt.thread.pool-8-thread-16) Lock Acquired to object EngineLock
[exclusiveLocks= key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM
, sharedLocks= ]
2014-12-05 09:38:06,504 INFO
[org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(org.ovirt.thread.pool-8-thread-16) START, IsVmDuringInitiatingVDSCommand(
vmId = d1ccb04d-bda8-42a2-bab6-7def2f8b2a00), log id: 2e257f81
2014-12-05 09:38:06,505 INFO
[org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(org.ovirt.thread.pool-8-thread-16) FINISH,
IsVmDuringInitiatingVDSCommand, return: false, log id: 2e257f81
2014-12-05 09:38:06,509 WARN [org.ovirt.engine.core.bll.RunVmCommand]
(org.ovirt.thread.pool-8-thread-16) CanDoAction of action RunVm failed.
Reasons:VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,SCHEDULING_NO_HOSTS
2014-12-05 09:38:06,510 INFO [org.ovirt.engine.core.bll.RunVmCommand]
(org.ovirt.thread.pool-8-thread-16) Lock freed to object EngineLock
[exclusiveLocks= key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM
, sharedLocks= ]
2014-12-05 09:38:06,539 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID:
86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c, Call Stack: null, Custom Event ID:
-1, Message: Failed to run VM Cent (User: admin).
2014-12-05 09:38:06,548 INFO
[org.ovirt.engine.core.bll.ProcessDownVmCommand]
(org.ovirt.thread.pool-8-thread-27) [58fe3e35] Running command:
ProcessDownVmCommand internal: true.
What me do?
Roman
--=_alternative 0072EDDF43257DA5_=
Content-Type: text/html; charset="US-ASCII"
<font size=2 face="sans-serif">Hi,</font>
<br><font size=2 face="sans-serif">Please Help</font>
<br>
<br><font size=2 face="sans-serif">I normal stop my virtual mashine. But
not start ! </font>
<br>
<br><font size=2 face="sans-serif">in the logs</font>
<br>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,437 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-87) Correlation ID: null, Call Stack: null,
Custom Event ID: -1, Message: VM Cent is down with error. Exit message:
('Failed to get size for volume %s', u'fb8466c9-0867-4e73-8362-2c95eea89a83').</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,439 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-87) Running on vds during rerun failed vm:
null</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,447 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-87) VM Cent (d1ccb04d-bda8-42a2-bab6-7def2f8b2a00)
is running in db and not running in VDS x3550m2down</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,475 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-87) Rerun vm d1ccb04d-bda8-42a2-bab6-7def2f8b2a00.
Called from vds x3550m2down</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,482 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID: 86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c,
Call Stack: null, Custom Event ID: -1, Message: Failed to run VM Cent on
Host x3550m2down</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,486 INFO [org.ovirt.engine.core.bll.RunVmCommand]
(org.ovirt.thread.pool-8-thread-16) Lock Acquired to object EngineLock
[exclusiveLocks= key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM</font>
<br><font size=2 face="sans-serif">, sharedLocks= ]</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,504 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(org.ovirt.thread.pool-8-thread-16) START, IsVmDuringInitiatingVDSCommand(
vmId = d1ccb04d-bda8-42a2-bab6-7def2f8b2a00), log id: 2e257f81</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,505 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(org.ovirt.thread.pool-8-thread-16) FINISH, IsVmDuringInitiatingVDSCommand,
return: false, log id: 2e257f81</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,509 WARN [org.ovirt.engine.core.bll.RunVmCommand]
(org.ovirt.thread.pool-8-thread-16) CanDoAction of action RunVm failed.
Reasons:VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,SCHEDULING_NO_HOSTS</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,510 INFO [org.ovirt.engine.core.bll.RunVmCommand]
(org.ovirt.thread.pool-8-thread-16) Lock freed to object EngineLock [exclusiveLocks=
key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM</font>
<br><font size=2 face="sans-serif">, sharedLocks= ]</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,539 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID: 86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c,
Call Stack: null, Custom Event ID: -1, Message: Failed to run VM Cent (User:
admin).</font>
<br><font size=2 face="sans-serif">2014-12-05 09:38:06,548 INFO [org.ovirt.engine.core.bll.ProcessDownVmCommand]
(org.ovirt.thread.pool-8-thread-27) [58fe3e35] Running command: ProcessDownVmCommand
internal: true.</font>
<br>
<br><font size=2 face="sans-serif">What me do?</font>
<br>
<br>
<br><font size=2 face="sans-serif"> Roman</font>
--=_alternative 0072EDDF43257DA5_=--
10 years
Fwd: run ovirt-shell script like background job - problem
by Grzegorz Szypa
So, i have a question.
Is ovirt-engine-cli-3.5.0.2-1.el6.noarch compatible in ovirt-engine-3.4?
Can install ovirt-engine-cli-3.5 on ovirt-engine-cli-3.4 and using him with
landscape based on ovirt 3.4 ??
2014-12-07 17:33 GMT+01:00 Juan Hernández <jhernand(a)redhat.com>:
> On 12/07/2014 05:05 PM, Grzegorz Szypa wrote:
> > Hi,
> >
> > I have a problem with running ovirt-shell script, that it starting VMs.
> > In dialog mode it's fine, but in background no :(
> >
> > Example script:
> > ovirt-shell -E 'action vm WinSrv2012r2 start'
> >
> > I start this job in cron as root.
> >
> >
> > Have somebody idea??
> >
> > --
> > G.Sz.
> >
>
> We used to have bug that made ovirt-shell fail when there wasn't a tty
> available (like when running from cron):
>
> ovirt-shell cannot run in cron (/dev/tty missing)
> https://bugzilla.redhat.com/1119412
>
> That was fixed in version 3.5.0.2, so make sure that you have at least
> that version.
>
> If you still have problems please share the output of the ovirt-shell
> command.
>
> --
> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
> 3ºD, 28016 Madrid, Spain
> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
>
--
G.Sz.
--
G.Sz.
10 years
RedHat 7 Install Ovirt Fails with No package ovirt-engine available.
by Tony
Hi I'm new to the users group.
I have redhat 7 installed and ceph working perfectly and now I wanted to
install ovirt and followed the instructions from the ovirt website and all
I get is this message below.
yum -y install ovirt-engine
Loaded plugins: langpacks, priorities, product-id, subscription-manager
No package ovirt-engine available.
Error: Nothing to do
Fails. I followed the instructions and fails every time.
10 years
