Re: [ovirt-users] Re-add a node
by Dafna Ron
what is the error message you get when you try to put the host in
maintenance? are there any running vm's reported?
Try to press the "confirm host has been rebooted" button and than see if
you can put the host in maintenance.
If that fails, select the host, in the general tab you will get the
re-install link.
try to re-install, when install fails the host should change status to
failed installation.
On 04/11/2014 12:09 PM, James James wrote:
> No, I can't ....
>
>
> 2014-04-11 12:12 GMT+02:00 Dafna Ron <dron(a)redhat.com
> <mailto:dron@redhat.com>>:
>
> can you put the host in maintenance?
>
>
>
>
> On 04/11/2014 10:43 AM, James James wrote:
>
> I can't delete the old node because it is in Non Responsive
> state. The remove button is stil blank .
>
> In the engine.log I've got this log :
> 2014-04-11 11:40:45,911 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
> (DefaultQuartzScheduler_Worker-88) Command
> GetCapabilitiesVDSCommand(HostName = node1, HostId =
> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
> execution failed. Exception: VDSNetworkException:
> sun.security.provider.certpath.SunCertPathBuilderException:
> unable to find valid certification path to requested target
> 2014-04-11 11:40:48,943 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
> (DefaultQuartzScheduler_Worker-12) Command
> GetCapabilitiesVDSCommand(HostName = node1, HostId =
> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
> execution failed. Exception: VDSNetworkException:
> sun.security.provider.certpath.SunCertPathBuilderException:
> unable to find valid certification path to requested target
>
>
>
>
>
> 2014-04-11 11:06 GMT+02:00 Alon Bar-Lev <alonbl(a)redhat.com
> <mailto:alonbl@redhat.com> <mailto:alonbl@redhat.com
> <mailto:alonbl@redhat.com>>>:
>
>
>
>
> ----- Original Message -----
> > From: "James James" <jreg2k(a)gmail.com
> <mailto:jreg2k@gmail.com> <mailto:jreg2k@gmail.com
> <mailto:jreg2k@gmail.com>>>
> > To: dron(a)redhat.com <mailto:dron@redhat.com>
> <mailto:dron@redhat.com <mailto:dron@redhat.com>>
> > Cc: "users" <users(a)ovirt.org <mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>
> > Sent: Friday, April 11, 2014 12:04:23 PM
> > Subject: Re: [ovirt-users] Re-add a node
> >
> > The engine is the same but the node (node1) has been
> reinstalled ...
>
> So you need to re-add it to the engine.
> Delete the old node at engine side and use the node user
> interface
> to add it to the engine.
>
> >
> >
> > 2014-04-11 10:48 GMT+02:00 James James <
> jreg2k(a)gmail.com <mailto:jreg2k@gmail.com>
> <mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>> > :
>
> >
> >
> >
> > the log contains information about the first node1
> installation ....
> >
> > http://pastebin.com/mZSb2wmD
> >
> >
> > 2014-04-11 10:12 GMT+02:00 Dafna Ron < dron(a)redhat.com
> <mailto:dron@redhat.com>
> <mailto:dron@redhat.com <mailto:dron@redhat.com>> > :
>
> >
> >
> >
> > please add the host-deploy log from
> /var/log/ovirt-engine/host-
> deploy/
> >
> >
> > On 04/11/2014 12:11 AM, James James wrote:
> >
> >
> >
> > Hi,
> > I don know i the subject is explicit enough but I have a
> problem
> and I hope
> > to find some help here.
> >
> > I had two hosts in my cluster (node1 and node2). I had to
> reinstall node1 due
> > to some networks problem. In the engine, node1 appears
> now "Not
> reponsive"
> > and I can't remove it from the engine ui.
> >
> > Now node1 is back and I want to add it in the cluster but I
> can't. I've got
> > this error (vdsm.log) :
> > BindingXMLRPC::ERROR::2014-04- 11 01
> <tel:2014-04-%2011%2001>
> <tel:2014-04-%2011%2001>:04:42,622::BindingXMLRPC::
>
> > 81::vds::(threaded_start) xml-rpc handler exception
> > Traceback (most recent call last):
> > File "/usr/share/vdsm/ BindingXMLRPC.py", line 77, in
> threaded_start
> > self.server.handle_request()
> > File "/usr/lib64/python2.6/ SocketServer.py", line 278, in
> handle_request
> > self._handle_request_noblock()
> > File "/usr/lib64/python2.6/ SocketServer.py", line 288, in
> > _handle_request_noblock
> > request, client_address = self.get_request()
> > File "/usr/lib64/python2.6/ SocketServer.py", line 456, in
> get_request
> > return self.socket.accept()
> > File "/usr/lib64/python2.6/site- packages/vdsm/
> SecureXMLRPCServer.py", line
> > 136, in accept
> > raise SSL.SSLError("%s, client %s" % (e, address[0]))
> > SSLError: sslv3 alert certificate unknown, client
> 192.168.1.100
> >
> > 192.168.1.100 is the engine's address
> >
> > Can somebody help me ?
> >
> >
> >
> > ______________________________ _________________
> > Users mailing list
> > Users(a)ovirt.org <mailto:Users@ovirt.org>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
>
> > http://lists.ovirt.org/ mailman/listinfo/users
> >
> >
> > --
> > Dafna Ron
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org <mailto:Users@ovirt.org>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
>
>
> --
> Dafna Ron
>
>
--
Dafna Ron
10 years
Re-add a node
by James James
Hi,
I don know i the subject is explicit enough but I have a problem and I hope
to find some help here.
I had two hosts in my cluster (node1 and node2). I had to reinstall node1
due to some networks problem. In the engine, node1 appears now "Not
reponsive" and I can't remove it from the engine ui.
Now node1 is back and I want to add it in the cluster but I can't. I've got
this error (vdsm.log) :
BindingXMLRPC::ERROR::2014-04-11
01:04:42,622::BindingXMLRPC::81::vds::(threaded_start) xml-rpc handler
exception
Traceback (most recent call last):
File "/usr/share/vdsm/BindingXMLRPC.py", line 77, in threaded_start
self.server.handle_request()
File "/usr/lib64/python2.6/SocketServer.py", line 278, in handle_request
self._handle_request_noblock()
File "/usr/lib64/python2.6/SocketServer.py", line 288, in
_handle_request_noblock
request, client_address = self.get_request()
File "/usr/lib64/python2.6/SocketServer.py", line 456, in get_request
return self.socket.accept()
File "/usr/lib64/python2.6/site-packages/vdsm/SecureXMLRPCServer.py",
line 136, in accept
raise SSL.SSLError("%s, client %s" % (e, address[0]))
SSLError: sslv3 alert certificate unknown, client 192.168.1.100
192.168.1.100 is the engine's address
Can somebody help me ?
10 years
live migration and snapshot problem
by Demeter Tibor
------=_Part_3341144_1822521101.1397149161768
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Dear members,
We made a test plaform for testing ovirt 3.4 features. We got four amd x2 4400+ machine with 2 gigs of ram and build a gluster based cluster. I set up an amd-G2 based cluster.
I rebuild and installed the qemu-kvm-rhev package ( http://ftp.redhat.com/redhat/linux/enterprise/6Server/en/RHEV/SRPMS/qemu-... ) .
The data storage is a "four brick" distributed-replicated gluster storage. I got a virtual machine (centos 6.5) from the ovirt's openstack based template repository.
Everything was good, the vm can run on any host, but the live migration doesn't work. Also, the snapshot feature is lost from menu. I can make live snapshot, but it doesn't show on the panel.
So:
- I lost the snapshots:)
- the live migration doesn't work.
Can anyone help me?
Thanks in advance.
Tibor
------=_Part_3341144_1822521101.1397149161768
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: times new roman, new york, times, se=
rif; font-size: 12pt; color: #000000"><div>Dear members,</div><div><br></di=
v><div>We made a test plaform for testing ovirt 3.4 features. We got four a=
md x2 4400+ machine with 2 gigs of ram and build a gluster based cluster. I=
set up an amd-G2 based cluster.</div><div>I rebuild and installed the qemu=
-kvm-rhev package (<a href=3D"http://ftp.redhat.com/redhat/linux/enterprise=
/6Server/en/RHEV/SRPMS/qemu-kvm-rhev-0.12.1.2-2.415.el6_5.7.src.rpm">http:/=
/ftp.redhat.com/redhat/linux/enterprise/6Server/en/RHEV/SRPMS/qemu-kvm-rhev=
-0.12.1.2-2.415.el6_5.7.src.rpm</a>) .</div><div>The data storage is a "fou=
r brick" distributed-replicated gluster storage. I got a virtual machine (c=
entos 6.5) from the ovirt's openstack based template repository.</div><div>=
<br></div><div>Everything was good, the vm can run on any host, but the liv=
e migration doesn't work. Also, the snapshot feature is lost from menu. I c=
an make live snapshot, but it doesn't show on the panel.</div><div><br></di=
v><div>So:</div><div><br></div><div> - I lost the snapshots:)</div><d=
iv>- the live migration doesn't work.</div><div><br></div><div>Can anyone h=
elp me?</div><div><br></div><div>Thanks in advance. </div><div><br></d=
iv><div>Tibor</div></div></body></html>
------=_Part_3341144_1822521101.1397149161768--
10 years
Re: [Users] HA
by Koen Vanoppen
Ok,
Thanx already for all the help. I adapted some things for quicker respons:
engine-config --get FenceQuietTimeBetweenOperationsInSec-->180
engine-config --set FenceQuietTimeBetweenOperationsInSec=60
engine-config --get StorageDomainFalureTimeoutInMinutes-->180
engine-config --set StorageDomainFalureTimeoutInMinutes=1
engine-config --get SpmCommandFailOverRetries-->5
engine-config --set SpmCommandFailOverRetries
engine-config --get SPMFailOverAttempts-->3
engine-config --set SPMFailOverAttempts=1
engine-config --get NumberOfFailedRunsOnVds-->3
engine-config --set NumberOfFailedRunsOnVds=1
engine-config --get vdsTimeout-->180
engine-config --set vdsTimeout=30
engine-config --get VDSAttemptsToResetCount-->2
engine-config --set VDSAttemptsToResetCount=1
engine-config --get TimeoutToResetVdsInSeconds-->60
engine-config --set TimeoutToResetVdsInSeconds=30
Now the result of this is that when the VM is not running on the SPM that
it will migrate before going in pause mode.
But when we tried it, when the vm is running on the SPM, it get's in paused
mode (for safety reasons, I know ;-) ). And stays there until the host gets
MANUALLY fenced by rebooting it. So now my question is... How can I make
the hypervisor fence (so reboots, so vm is moved) quicker?
Kind regards,
Koen
2014-04-04 16:28 GMT+02:00 Koen Vanoppen <vanoppen.koen(a)gmail.com>:
> Ja das waar. Maar was aan't rijden... Dus ik stuur maar door dan :-). Ik
> heb reeds de time out aangepast. Die stond op 5 min voor hij den time out
> ging geven. Staat nu op 2 min
> On Apr 4, 2014 4:14 PM, "David Van Zeebroeck" <
> david.van.zeebroeck(a)brusselsairport.be> wrote:
>
>> Ik heb ze ook he
>>
>>
>>
>> Maar normaal had de fencing moeten werken als ik het zo lees
>>
>> Dus daar is ergens iets verkeerd gelopen zo te lezen
>>
>>
>>
>> *From:* Koen Vanoppen [mailto:vanoppen.koen@gmail.com]
>> *Sent:* vrijdag 4 april 2014 16:07
>> *To:* David Van Zeebroeck
>> *Subject:* Fwd: Re: [Users] HA
>>
>>
>>
>>
>>
>> David Van Zeebroeck
>>
>> Product Manager Unix Infrastructure
>>
>> Information & Communication Technology
>>
>> *Brussels Airport Company*
>>
>> T +32 (0)2 753 66 24
>>
>> M +32 (0)497 02 17 31
>>
>> david.van.zeebroeck(a)brusselsairport.be
>>
>> *www.brusselsairport.be <http://www.brusselsairport.be>*
>>
>>
>>
>>
>>
>> *FOLLOW US ON:*
>>
>> <http://https://nl-nl.facebook.com/BrusselsairportBRU>
>>
>> <http://www.brusselsairport.be/en/mediaroom/brusm/>
>>
>>
>>
>> Company Info <http://www.brusselsairport.be/en/maildisclaimer/>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>
>> Date: Apr 4, 2014 3:39 PM
>> Subject: Re: [Users] HA
>> To: "Koen Vanoppen" <vanoppen.koen(a)gmail.com>
>> Cc: "ovirt-users Users" <users(a)ovirt.org>
>>
>>
>>
>> On 4 Apr 2014, at 15:14, Sander Grendelman wrote:
>>
>>
>>
>> Do you have power management configured?
>>
>> Was the "failed" host fenced/rebooted?
>>
>>
>>
>> On Fri, Apr 4, 2014 at 2:21 PM, Koen Vanoppen <vanoppen.koen(a)gmail.com>
>> wrote:
>>
>> So... It is possible for a fully automatic migration of the VM to another
>> hypervisor in case Storage connection fails?
>>
>> How can we make this happen? Because for the moment, when we tested the
>> situation they stayed in pause state.
>>
>> (Test situation:
>>
>> - Unplug the 2 fibre cables from the hypervisor
>> - VM's go in pause state
>> - VM's stayed in pause state until the failure was solved
>>
>>
>>
>> as said before, it's not safe hence we (try to) not migrate them.
>>
>> They only get paused when they actually access the storage which may not
>> be always the case. I.e. the storage connection is severed, host deemed
>> NonOperational and VMs are getting migrated from it, then some of them will
>> succeed if they didn't access that "bad" storage … the paused VMs will
>> remain (mostly, it can still happen that they appear paused migrated on
>> other host when the disk access occurs only at the last stage of migration)
>>
>>
>>
>>
>>
>> so in other words, if you want to migrate the VMs without interruption
>> it's not sometimes possible
>>
>> if you are fine with the VMs restarted in short time on other host then
>> power management/fencing will help here
>>
>>
>>
>> Thanks,
>>
>> michal
>>
>> )
>>
>>
>>
>> They only returned when we restored the fiber connection to the
>> Hypervisor…
>>
>>
>>
>> yes, since 3.3 we have the autoresume feature
>>
>>
>>
>> Thanks,
>>
>> michal
>>
>>
>>
>>
>>
>>
>>
>> Kind Regards,
>>
>> Koen
>>
>>
>>
>>
>>
>> 2014-04-04 13:52 GMT+02:00 Koen Vanoppen <vanoppen.koen(a)gmail.com>:
>>
>> So... It is possible for a fully automatic migration of the VM to another
>> hypervisor in case Storage connection fails?
>>
>> How can we make this happen? Because for the moment, when we tested the
>> situation they stayed in pause state.
>>
>> (Test situation:
>>
>> - Unplug the 2 fibre cables from the hypervisor
>> - VM's go in pause state
>> - VM's stayed in pause state until the failure was solved
>>
>> )
>>
>>
>>
>> They only returned when we restored the fiber connection to the
>> Hypervisor...
>>
>> Kind Regards,
>>
>> Koen
>>
>>
>>
>> 2014-04-03 16:53 GMT+02:00 Koen Vanoppen <vanoppen.koen(a)gmail.com>:
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: "Doron Fediuck" <dfediuck(a)redhat.com>
>> Date: Apr 3, 2014 4:51 PM
>> Subject: Re: [Users] HA
>>
>> To: "Koen Vanoppen" <vanoppen.koen(a)gmail.com>
>> Cc: "Omer Frenkel" <ofrenkel(a)redhat.com>, <users(a)ovirt.org>, "Federico
>> Simoncelli" <fsimonce(a)redhat.com>, "Allon Mureinik" <amureini(a)redhat.com>
>>
>>
>>
>> ----- Original Message -----
>> > From: "Koen Vanoppen" <vanoppen.koen(a)gmail.com>
>> > To: "Omer Frenkel" <ofrenkel(a)redhat.com>, users(a)ovirt.org
>> > Sent: Wednesday, April 2, 2014 4:17:36 PM
>> > Subject: Re: [Users] HA
>> >
>> > Yes, indeed. I meant not-operational. Sorry.
>> > So, if I understand this correctly. When we ever come in a situation
>> that we
>> > loose both storage connections on our hypervisor, we will have to
>> manually
>> > restore the connections first?
>> >
>> > And thanx for the tip for speeding up thins :-).
>> >
>> > Kind regards,
>> >
>> > Koen
>> >
>> >
>> > 2014-04-02 15:14 GMT+02:00 Omer Frenkel < ofrenkel(a)redhat.com > :
>> >
>> >
>> >
>> >
>> >
>> > ----- Original Message -----
>> > > From: "Koen Vanoppen" < vanoppen.koen(a)gmail.com >
>> > > To: users(a)ovirt.org
>> > > Sent: Wednesday, April 2, 2014 4:07:19 PM
>> > > Subject: [Users] HA
>> > >
>> > > Dear All,
>> > >
>> > > Due our acceptance testing, we discovered something. (Document will
>> > > follow).
>> > > When we disable one fiber path, no problem multipath finds it way no
>> pings
>> > > are lost.
>> > > BUT when we disabled both the fiber paths (so one of the storage
>> domain is
>> > > gone on this host, but still available on the other host), vms go in
>> paused
>> > > mode... He chooses a new SPM (can we speed this up?), put's the host
>> in
>> > > non-responsive (can we speed this up, more important) and the VM's
>> stay on
>> > > Paused mode... I would expect that they would be migrated (yes, HA is
>> >
>> > i guess you mean the host moves to not-operational (in contrast to
>> > non-responsive)?
>> > if so, the engine will not migrate vms that are paused to do io error,
>> > because of data corruption risk.
>> >
>> > to speed up you can look at the storage domain monitoring timeout:
>> > engine-config --get StorageDomainFalureTimeoutInMinutes
>> >
>> >
>> > > enabled) to the other host and reboot there... Any solution? We are
>> still
>> > > using oVirt 3.3.1 , but we are planning a upgrade to 3.4 after the
>> easter
>> > > holiday.
>> > >
>> > > Kind Regards,
>> > >
>> > > Koen
>> > >
>>
>> Hi Koen,
>> Resuming from paused due to io issues is supported (adding relevant
>> folks).
>> Regardless, if you did not define power management, you should manually
>> approve
>> source host was rebooted in order for migration to proceed. Otherwise we
>> risk
>> split-brain scenario.
>>
>> Doron
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>>
10 years
[Users] using cloud-init?
by Jason Brooks
Hi all --
I've been trying, without success, to use cloud-init w/ oVirt 3.4 on Fedora
19 hosts. I've had similar failure in the past, but here are the steps I'm
taking currently:
1. Import as template F19 image from ovirt-image-repository glance repo
2. Create new vm based on that template
3. Choose ovirtmgmt as the nic1 for the VM
4. Show advanced options, click initial run, expand authentication, enter
a root password, paste my public key into the allowed ssh keys field
5. Hit OK, and then run the VM
6. In the VM's console, I see it complain about No instance datasource found
7. Unsurprisingly, I can't log in w/ pw or ssh.
(By the way, are there any default creds for these images? I thought they might
be based on the fedora cloud images, but their default uname fedora pw nothing
doesn't work)
I've tried some other derivations of this, launching from the Run Once menu,
filling in various different fields, etc.
Any clues?
I don't see many people complaining about this, so I'm assuming it's working
for other people. I don't know, maybe it's something with Fedora?
Thanks, Jason
10 years
Regenerating new SSL certificates for ovirt-engine
by Trey Dockendorf
Given the recent OpenSSL heartbleed vulnerability, I would like to
regenerate the certificates used by my ovirt-engine server. What are
the steps to regenerate the certificates, and which certificates
should be regenerated? My ovirt-engine host is on our campus LAN,
which offers no real protection, so I would consider it public facing
despite not being routable across the WAN. At minimum I'd like to
regenerate the certificates used by Apache.
I'd be happy to document this on the wiki, as the only items I could
find were related to host renaming.
Thanks,
- Trey
10 years
List emails
by Maurice James
--_714b9aff-25ba-4d45-a346-b81c69f2a545_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Can anyone of the list managers check to see if my email address is on a bl=
ock list? I had to re-enable mail delivery in my profile because it said th=
at there were too many bounces. Even after re-enabling I'm still not receiv=
ing. Thanks
=
--_714b9aff-25ba-4d45-a346-b81c69f2a545_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>Can anyone of the list managers =
check to see if my email address is on a block list? I had to re-enable mai=
l delivery in my profile because it said that there were too many bounces. =
Even after re-enabling I'm still not receiving. Thanks<br> </div=
></body>
</html>=
--_714b9aff-25ba-4d45-a346-b81c69f2a545_--
10 years
Test
by Maurice James
--_7deed9c5-3d61-4fce-bc9a-98c92022ac2f_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I haven't been seeing messages from the list in a few days
=
--_7deed9c5-3d61-4fce-bc9a-98c92022ac2f_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>I haven't been seeing messages f=
rom the list in a few days<br> </div></body>
</html>=
--_7deed9c5-3d61-4fce-bc9a-98c92022ac2f_--
10 years
Test2
by Maurice James
--_dc37d2ae-5486-4c1a-8f22-3af95516f66c_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
=
--_dc37d2ae-5486-4c1a-8f22-3af95516f66c_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'><br> </div></body>
</html>=
--_dc37d2ae-5486-4c1a-8f22-3af95516f66c_--
10 years
Re: [ovirt-users] necessity to run yum update ovirt-engine-setup to update ovirt 3.4
by Yedidyah Bar David
(Mail sent to me privately; replying also to the list)
----- Original Message -----
> From: "Tamer Lima" <tamer.americo(a)gmail.com>
> To: "Yedidyah Bar David" <didi(a)redhat.com>
> Sent: Thursday, April 10, 2014 4:30:11 PM
> Subject: Re: [ovirt-users] necessity to run yum update ovirt-engine-setup to update ovirt 3.4
>
> Hello, mister
>
>
>
> On Thu, Apr 10, 2014 at 3:29 AM, Yedidyah Bar David <didi(a)redhat.com> wrote:
>
> > ----- Original Message -----
> > > From: "Tamer Lima" <tamer.americo(a)gmail.com>
> > > To: users(a)ovirt.org
> > > Sent: Wednesday, April 9, 2014 9:18:51 PM
> > > Subject: [ovirt-users] necessity to run yum update ovirt-engine-setup to
> > update ovirt 3.4
> > >
> > > hello,
> > >
> > > upgrade from ovirt 3.3 to 3.4
> > > following the steps on ovirt.org/OVirt_3.4_Release_Notes
> > >
> > > I tried update from yum, without success
> > >
> > >
> > >
> > > yum update {ovirt-engine-setup, ovirt-engine , ovirt-release and
> > > ovirt-release-el6 }
> >
> > Where do you see instructions to update ovirt-engine? You cannot update
> > it directly because it's version-locked. This is done to ensure that
> > you do not run a newer engine with an older database - the main task
> > engine-setup does during an upgrade is updating the database.
> >
> >
> I followed this anchor :
> http://www.ovirt.org/OVirt_3.4_Release_Notes#Fedora_.2F_CentOS_.2F_RHEL
>
> ====================
>
> If you're upgrading from oVirt 3.3 you should just execute:
>
> # yum update ovirt-engine-setup
> # engine-setup
>
> ==========================
>
>
>
> > >
> > > Then I tried the following command and it worked fine: engine-setup
> >
> > Didn't it tell you that there are updates to Setup and that you should
> > first 'yum update ovirt-engine-setup'? Probably during your attempts
> > you did update it.
> >
> >
> Well, according the output on prompt shell, there was no update : "No
> Packages marked for Update"
Obviously, if it's already updated by your cron.
>
>
> > >
> > > Now my ovirt works fine, my cluster is running virtual machines on
> > > compatibility mode 3.3 although ovirt is now 3.4
> >
> > Great :-)
> >
> > >
> > > Then I ask : What is the necessity to execute yum update
> > ovirt-engine-setup
> > > if when I execute only engine-setup this script search for updates ?
> >
> > engine-setup searches for both updates to the engine and to Setup itself.
> > If it finds updates to Setup, it tells you to manually update it with yum.
> > If it finds other updates it asks you to confirm updating and then updates.
> >
> > >
> > >
> >
>
> ok. thanks .
>
> > >
> > >
> > >
> > > Failed command list execution
> > > For each command yum update {ovirt-engine-setup, ovirt-engine ,
> > ovirt-release
> > > and ovirt-release-el6 } the result was the same :
> > >
> > >
> > >
> > > Loaded plugins: downloadonly, fastestmirror, refresh-packagekit,
> > security,
> > > versionlock
> > > Loading mirror speeds from cached hostfile
> > > * base: mirror.globo.com
> > > * epel: mirror.globo.com
> > > * extras: mirror.globo.com
> > > * ovirt-epel: mirror.globo.com
> > > * updates: mirror.globo.com
> > > Setting up Update Process
> > > No Packages marked for Update
> >
> >
> > Most probably you did update ovirt-engine-setup at some point.
> > If you want to further debug this, please look at and/or post your yum.log.
> >
> >
> you are right. thanks. on april,6 my yumcron updated ovirt to 3.4. (just
> update, not setup)
>
>
> [root@srv-0202 ~]# more /var/log/yum.log | grep ovirt
> Feb 27 13:08:05 Installed: ovirt-release-11.0.2-1.noarch
> Feb 27 13:52:17 Installed: ovirt-engine-sdk-python-3.3.3.0-1.el6.noarch
> Feb 27 13:52:18 Installed: ovirt-host-deploy-1.1.3-1.el6.noarch
> Feb 27 13:52:22 Installed: ovirt-image-uploader-3.3.3-1.el6.noarch
> Feb 27 13:52:22 Installed: ovirt-iso-uploader-3.3.3-1.el6.noarch
> Feb 27 13:52:23 Installed: ovirt-engine-lib-3.3.3-2.el6.noarch
> Feb 27 13:52:23 Installed: ovirt-engine-websocket-proxy-3.3.3-2.el6.noarch
> Feb 27 13:52:36 Installed: ovirt-log-collector-3.3.3-1.el6.noarch
> Feb 27 13:52:36 Installed: ovirt-host-deploy-java-1.1.3-1.el6.noarch
> Feb 27 13:53:16 Installed: ovirt-engine-cli-3.3.0.6-1.el6.noarch
> Feb 27 13:53:19 Installed: ovirt-engine-userportal-3.3.3-2.el6.noarch
> Feb 27 13:53:26 Installed: ovirt-engine-webadmin-portal-3.3.3-2.el6.noarch
> Feb 27 13:53:26 Installed: ovirt-engine-dbscripts-3.3.3-2.el6.noarch
> Feb 27 13:53:26 Installed: ovirt-engine-restapi-3.3.3-2.el6.noarch
> Feb 27 13:53:26 Installed: ovirt-engine-tools-3.3.3-2.el6.noarch
> Feb 27 13:53:26 Installed: ovirt-engine-setup-3.3.3-2.el6.noarch
> Feb 27 13:53:27 Installed: ovirt-engine-backend-3.3.3-2.el6.noarch
> Feb 27 13:53:27 Installed: ovirt-engine-3.3.3-2.el6.noarch
> Feb 27 13:53:59 Installed: ovirt-host-deploy-offline-1.1.3-1.el6.noarch
> Feb 27 13:53:59 Installed:
> ovirt-engine-setup-plugin-allinone-3.3.3-2.el6.noarch
>
> Apr 06 04:21:12 Updated: ovirt-engine-sdk-python-3.4.0.6-1.el6.noarch
> Apr 06 04:21:12 Updated: ovirt-engine-lib-3.4.0-1.el6.noarch
> Apr 06 04:21:13 Installed: ovirt-engine-setup-base-3.4.0-1.el6.noarch
> Apr 06 04:21:13 Updated: ovirt-host-deploy-1.2.0-1.el6.noarch
> Apr 06 04:21:38 Installed:
> ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch
> Apr 06 04:21:38 Installed:
> ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch
> Apr 06 04:21:38 Installed:
> ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch
> Apr 06 04:22:00 Updated: ovirt-host-deploy-offline-1.2.0-1.el6.x86_64
> Apr 06 04:22:00 Updated:
> ovirt-engine-setup-plugin-allinone-3.4.0-1.el6.noarch
> Apr 06 04:22:00 Updated: ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch
> Apr 06 04:22:00 Updated: ovirt-host-deploy-java-1.2.0-1.el6.noarch
> Apr 06 04:22:00 Updated: ovirt-engine-setup-3.4.0-1.el6.noarch
> Apr 06 04:22:02 Updated: ovirt-log-collector-3.4.1-1.el6.noarch
> Apr 06 04:22:02 Updated: ovirt-image-uploader-3.4.0-1.el6.noarch
> Apr 06 04:22:02 Updated: ovirt-engine-cli-3.4.0.5-1.el6.noarch
> Apr 06 04:22:02 Updated: ovirt-iso-uploader-3.4.0-1.el6.noarch
> Apr 06 04:22:08 Updated: ovirt-release-11.1.0-1.noarch
> Apr 09 11:46:08 Updated: ovirt-engine-dbscripts-3.4.0-1.el6.noarch
> Apr 09 11:46:16 Updated: ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch
> Apr 09 11:46:17 Updated: ovirt-engine-backend-3.4.0-1.el6.noarch
> Apr 09 11:46:17 Updated: ovirt-engine-restapi-3.4.0-1.el6.noarch
> Apr 09 11:46:17 Updated: ovirt-engine-tools-3.4.0-1.el6.noarch
> Apr 09 11:46:17 Updated: ovirt-engine-3.4.0-1.el6.noarch
> Apr 09 11:46:24 Updated: ovirt-engine-userportal-3.4.0-1.el6.noarch
> Apr 10 03:27:27 Updated: ovirt-release-11.2.0-1.noarch
>
>
>
> in fact, the 2 steps are correct : first update with yum , then finally
> execute engine-setup.
>
> Now I am thinking about it.
> I have to verify yum updates, because my system can be updated a long
> without my knowledge,
> but is mandatory to make a setup after this update. otherwise, in practice
> ovirt is not well deployed, right ?
Not sure what you ask exactly.
If it's "I want to keep my system automatically up-to-date all the time.
What should I do?", then, yes, you are right. 'yum update' is not enough,
you also need to run engine-setup. I would not recommend to do that in
cron - you might want to make a cron job that alerts you somehow if there
are updates, but actually run 'engine-setup' manually. That said, generally
speaking, during a specific version, the questions and answers asked during
upgrade are not changed, so you can create an answer file for e.g. 3.4
updates, verify that engine-setup with this answer file works as expected,
and run it from cron.
If it's "I run yum update in cron. I understand that I also need to run
engine-setup to update the engine. Should I expect any damage from not
doing that - that is, having updated packages without running engine-setup?",
then no, the packages that are sensitive to database content are version-locked,
and will not be updated by a normal yum update.
Best regards,
--
Didi
10 years
