Hi Aill,
We are creating two nics using the api, but it seems the second network is
not come up and the first one is working. The following xml is used to for
the nic creation
<nic>
<interface>virtio</interface>
<name>eth0</name>
<boot_protocol>static</boot_protocol>
<mac address='".$ip->mac_address."'/>
<network>
<ip address='".$ip->mac_ip."' netmask='255.255.255.0'
gateway='".$ip->mac_gateway."'/>
</network>
<on_boot>true</on_boot>
<vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' />
</nic>
<nic>
<interface>virtio</interface>
<name>eth1</name>
<boot_protocol>static</boot_protocol>
<mac address='".$ip->mac_address."'/>
<network>
<ip address='".$ip->mac_ip."' netmask='255.255.255.0'
gateway='".$ip->mac_gateway."'/>
</network>
<on_boot>true</on_boot>
<vnic_profile id='037d806f-d76b-4da3-84b6-ac7a5087f836' />
</nic>
When i checked the configuration file
(/etc/sysconfig/network-scripts/ifcfg-eth1) after creating...i find it
seems the ONBOOT=no.....eventhough we set it true from the api. Is this a
bug ?
--
Regards
Shanil
