March 2015 - Users - oVirt List Archives

Anyone using YAML support in the RESTAPI?
by Juan Hernández 06 Apr '15

06 Apr '15

Hello, Does anyone have a good reason to not remove the YAML support from the RESTAPI? As far as I know it isn't used or tested in any reasonable way, so I would like to remove it completely for 3.6. If anyone is using it and can't move to JSON or XML please speak up. Regards, Juan Hernandez -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

2 2

Network QOS not working for VM Outbound
by Punit Dambiwal 02 Apr '15

02 Apr '15

Hi, I have check and found that the Network QOS not working for VM outbound....it's working fine for Inbound only... [image: Inline image 1] root@vm3:~# ./speedtest_cli.py Retrieving speedtest.net configuration... Retrieving speedtest.net server list... Testing from (103.4.X.X)... Selecting best server based on latency... Hosted by HKIX1 (Hong Kong) [3.70 km]: 3.153 ms Testing download speed........................................ Download: 1.95 Mbit/s Testing upload speed.................................................. Upload: 143.09 Mbit/s Thanks, Punit

3 6

Caused by: java.lang.IllegalStateException: Insufficient amount of free MACs.
by Punit Dambiwal 01 Apr '15

01 Apr '15

Hi, I am facing this strange issue if i deploy the VM with Template... Caused by: java.lang.IllegalStateException: Insufficient amount of free MACs. Actually i have almost 2000 Mac address free in our environment but VM creation failed with this error :- Thanks, Punit

3 6

Re: [ovirt-users] Modules sanlock are not configured
by Roy Golan 01 Apr '15

01 Apr '15

3 8

Guest PXE boot with 2 NICs : MAC order
by Nicolas Ecarnot 01 Apr '15

01 Apr '15

Hello, I can't remember if I already asked that here, but my researches returned nothing obvious. It is frequent in our setup to boot a VM setup with two NICS : - one in a network with a DHCP server, leading to a PXE/tftp/kickstart setup - a second one with a network with no DHCP, nor routed. We use this network in some cases to access iSCSI data. When PXE booting such a VM, I realized that in gPXE, the NICs are order according to their MAC address (net0, net1...) I found no mean to explicitly tell gPXE to use a specific interface, and it is a pain, because my setup workflow implies I could choose the correct interface. In the oVirt web GUI, I found nothing about that. In the ovirt-shell, I had no better luck. In the gPXE wiki, I found nothing more that what's above. This is not a big issue, but was worth asking. -- Nicolas Ecarnot

3 12

Snapshot issue
by Koen Vanoppen 01 Apr '15

01 Apr '15

Dear all, I have the following problem: Cannot run VM. The VM is performing an operation on a Snapshot. Please wait for the operation to finish, and try again. It is like this since Friday... How can I resolve this? I really need this vm to be up again... Kind regards, Koen

2 11

engine-setup fails with FATAL: Cannot execute sql command:
by mad Engineer 01 Apr '15

01 Apr '15

Hello All, Trying ovirt on centos 6.5 but fails at PostgreSQL configuration with error [ ERROR ] Failed to execute stage 'Misc configuration': Command '/usr/share/ovirt-engine/dbscripts/create_schema.sh' failed to execute Inside log it shows this 2015-03-31 17:47:15 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.execute:866 execute-output: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20150331174256-pehvs7.log', '-c', 'apply'] stderr: psql:/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0210_change_group_ids.sql:59: ERROR: could not open relation with OID 32878 CONTEXT: SQL statement "CREATE temp TABLE tmp_users_groups ON COMMIT DROP AS SELECT fnsplitteruuid(group_ids) AS group_id, user_id FROM users" PL/pgSQL function "__temp_change_group_ids_03_05_0210" line 35 at SQL statement FATAL: Cannot execute sql command: --file=/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0210_change_group_ids.sql 2015-03-31 17:47:15 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/db/schema.py", line 291, in _misc oenginecons.EngineDBEnv.PGPASS_FILE File "/usr/lib/python2.6/site-packages/otopi/plugin.py", line 871, in execute command=args[0], RuntimeError: Command '/usr/share/ovirt-engine/dbscripts/schema.sh' failed to execute 2015-03-31 17:47:15 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': Command '/usr/share/ovirt-engine/dbscripts/schema.sh' failed to execute Can some one please help me with this please

2 2

VDSM memory consumption
by Federico Alberto Sayd 31 Mar '15

31 Mar '15

Hello: I am experiencing troubles with VDSM memory consuption. I am running Engine: ovirt 3.5.1 Nodes: Centos 6.6 VDSM 4.16.10-8 Libvirt: libvirt-0.10.2-46 Kernel: 2.6.32 When the host boots, memory consuption is normal, but after 2 or 3 days running, VDSM memory consuption grows and it consumes more memory that all vm's running in the host. If I restart the vdsm service, memory consuption normalizes, but then it start growing again. I have seen some BZ about vdsm and supervdsm about memory leaks, but I don't know if VDSM 4.6.10.8 is still affected by a related bug. Any help? If you need, I can provide more information Thank you

11 31

Problem with USB redirection
by Juan Jose 31 Mar '15

31 Mar '15

Hello everybody, I have installed a little infrestructure with ovirt 3.5.0.1 and I have some Windows 7 VMs created and working well. From linux client, when I go to user portal and open a VM (all these VM have defined in console USB support as Native) and I plug a USB pen drive, the VM takes it and I can use it from my Windows 7 VM. But I have a problem with Windows 7 clients. When I try to redirect a USB from my Windows 7 client to my Windows 7 VM the remote-viewer gives the error "USB redirections support not compiled in". Any suggest or idea about what is my problem? Many thanks in advanced, Juanjo.

4 8

firewalld rules for engine
by Jorick Astrego 31 Mar '15

31 Mar '15

This is a multi-part message in MIME format. --------------030107030100090207010401 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi=2C After running engine-setup =283=2E5=2E2rc2=29 on Centos 7=2C the setup tell= s me the following In order to configure firewalld=2C copy the files from /etc/ovirt-engine/firewalld to /etc/firewalld/services and execute the following commands=3A firewall-cmd -service ovirt-nfs firewall-cmd -service ovirt-postgres firewall-cmd -service ovirt-https firewall-cmd -service ovirt-fence-kdump-listener firewall-cmd -service ovirt-websocket-proxy firewall-cmd -service ovirt-http The commands above don=27t work=2C shouldn=27t they be=3A firewall-cmd --permanent --add-service ovirt-nfs firewall-cmd --permanent --add-service ovirt-postgres firewall-cmd --permanent --add-service ovirt-https firewall-cmd --permanent --add-service ovirt-fence-kdump-listener firewall-cmd --permanent --add-service ovirt-websocket-proxy firewall-cmd --permanent --add-service ovirt-http firewall-cmd --reload Kind regards=2C Jorick Astrego Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- --------------030107030100090207010401 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Chead=3E =3Cmeta http-equiv=3D=22content-type=22 content=3D=22text/html=3B chars= et=3Dutf-8=22=3E =3C/head=3E =3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E Hi=2C=3Cbr=3E =3Cbr=3E After running engine-setup =283=2E5=2E2rc2=29 on Centos 7=2C the setup= tells me the following=3Cbr=3E =3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 In order to conf= igure firewalld=2C copy the files from=3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 /etc/ovirt-engine/firewalld to /etc/firewalld/services=3Cbr=3E= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 and execute the following commands=3A=3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 firewall-cmd -service ovirt-nfs=3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 firewall-cmd -service ovirt-postgres=3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 firewall-cmd -service ovirt-https=3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 firewall-cmd -service ovirt-fence-kdump-listener=3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 firewall-cmd -service ovirt-websocket-proxy=3Cbr=3E =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0 firewall-cmd -service ovirt-http=3Cbr=3E =3Cbr=3E The commands above don=27t work=2C shouldn=27t they be=3A=3Cbr=3E =3Cbr=3E =3Cblockquote=3Efirewall-cmd --permanent --add-service ovirt-nfs=3Cbr= =3E firewall-cmd --permanent --add-service ovirt-postgres=3Cbr=3E firewall-cmd --permanent --add-service ovirt-https=3Cbr=3E firewall-cmd --permanent --add-service ovirt-fence-kdump-listener=3Cb= r=3E firewall-cmd --permanent --add-service ovirt-websocket-proxy=3Cbr=3E= firewall-cmd --permanent --add-service ovirt-http=3Cbr=3E firewall-cmd --reload=3Cbr=3E =3C/blockquote=3E Kind regards=2C=3Cbr=3E =3Cbr=3E Jorick Astrego=3Cbr=3E =20= =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E --------------030107030100090207010401--

2 1