July 2015 - Users - oVirt List Archives

GlusterFS Hyperconvergence
by Tiemen Ruiten 06 Jul '15

06 Jul '15

Hello, I'm in the planning stage of setting up a new oVirt cluster, where I would prefer to use the local disks of the hypervisors for a GlusterFS storage domain. What is the current recommendation (for version 3.5.x)? I found this presentation which seems to suggest that it's possbile with some caveats: http://www.ovirt.org/images/6/6c/2015-ovirt-glusterfs-hyperconvergence.pdf And a few open bugs: https://bugzilla.redhat.com/show_bug.cgi?id=1177791 https://bugzilla.redhat.com/show_bug.cgi?id=1177775 https://bugzilla.redhat.com/show_bug.cgi?id=1177773 What I can't find is current information on if this setup is already possible with 3.5.x or it's better to wait for 3.6. Could someone enlighten me? -- Tiemen Ruiten Systems Engineer R&D Media

3 6

macspoof custom property lost after restore from snapshot
by Yedidyah Bar David 06 Jul '15

06 Jul '15

Hi all, Using current nightly build of the 3.5 branch: * Had a vm * Powered it off * Edited and set macspoof=true * Created a snapshot * Previewed that snapshot * Committed * Checked custom properties - macspoof is not set Known issue? Should I open a bug? What logs/etc should I attach? Thanks, -- Didi

2 1

Autostart VM
by Koen Vanoppen 06 Jul '15

06 Jul '15

Hi Guys, I couldn't find anything directly concerning my following question, so If it was asked before, I'm sorry... Is there a way to config ovirt in a way that when you created a new vm, it will automatically boot? Because now, when you create a VM it stays in down state. Kind regards, Koen

3 3

Dashboard - Page Not Found
by Simon Barrett 06 Jul '15

06 Jul '15

--_000_D86C48DF8800164BBE50B87623F7AC958096CF80ln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I am running oVirt Engine Version: 3.5.3.1-1.el6 and get a "Page Not Found"= error when I click on the Dashboards tab at the top right of the admin por= tal. The Reports server is setup and working fine and I can see "Cluster Dashboa= rd", "Datacenter Dashboard", "System Dashboard" reports in "Webadmin Dashbo= ards" when viewing them directly through the oVirt Engine reports web inter= face. I couldn't find any logs that would assist in diagnosing this and couldn't = find any other solutions. Any suggestions as to how I fix this? Many thanks, Simon --_000_D86C48DF8800164BBE50B87623F7AC958096CF80ln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> I am running oVirt Engine Version: 3.5.3.1-1.el6 and= get a “Page Not Found” error when I click on the Dashboards ta= b at the top right of the admin portal.<o:p></o:p> <o:p> </o:p> The Reports server is setup and working fine and I c= an see “Cluster Dashboard”, “Datacenter Dashboard”,= “System Dashboard” reports in “Webadmin Dashboards&#8221= ; when viewing them directly through the oVirt Engine reports web interface= .<o:p></o:p> <o:p> </o:p> I couldn’t find any logs that would assist in = diagnosing this and couldn’t find any other solutions.<o:p></o:p> <o:p> </o:p> Any suggestions as to how I fix this?<o:p></o:p> <o:p> </o:p> Many thanks,<o:p></o:p> <o:p> </o:p> Simon<o:p></o:p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC958096CF80ln2wio001devtra_--

4 10

how can i setup hosted engine on the ovirt-node-3.5-201504280933
by Zhong Qiang 06 Jul '15

06 Jul '15

I 'm installing oVirt Node using a CD(ovirt-node-iso-3.5-0.999.201504280933.el6.iso),and Ovirt Node is worked. How can i setup hosted engine by using OVirt Node Console?or where can i get the Engine OVA? I can't find any description about this in the " www.ovirt.org". The Console looks like this: " Hosted Engine Setup Hosted Engine: Not configured Engine VM Name: Engine Status: Hosted engine not configured Engine ISO/OVA URL for download: _____________ PXE Boot Engine VM [ ] " Thanks.

3 17

Host failed to attach one of the Storage Domains attached to it
by Alin Ilie 05 Jul '15

05 Jul '15

This is a multi-part message in MIME format. --------------060503080301050806000704 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hello, We have a small oVirt deplopyment, with 2 INTEL CPUs and 1 AMD, therefor we defined 2 clusters. One of the Intel machines is running the management as well (We called this SOL). This deployment is connected to a NAS through NFS shares. Suddenly (no more than 2 days) SOL is reported as "Non operational" and in the Action Items is saying " Host failed to attach one of the Storage Domains attached to it." All other machines seems to be fine. In the past we encountered similar errors after (accidental) reboot of the hosts, but now it is not the case: [root@sol ~]# uptime 08:10:48 up 9 days, 15:48, 1 user, load average: 0.08, 0.05, 0.12 The "funny" is that the virtual machines already started on SOL are still running without any problems. I am not sure what logs to check. In /var/log/vdsm/vdsm.log we have this error, but I do not think it is relevant: Thread-38964::ERROR::2015-07-05 08:37:24,882::__init__::506::jsonrpc.JsonRpcServer::(_serveRequest) Internal server error Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/yajsonrpc/__init__.py", line 501, in _serveRequest res = method(**params) File "/usr/share/vdsm/rpc/Bridge.py", line 271, in _dynamicMethod result = fn(*methodArgs) File "/usr/share/vdsm/API.py", line 1330, in getStats stats.update(self._cif.mom.getKsmStats()) File "/usr/share/vdsm/momIF.py", line 60, in getKsmStats stats = self._mom.getStatistics()['host'] File "/usr/lib/python2.6/site-packages/mom/MOMFuncs.py", line 75, in getStatistics host_stats = self.threads['host_monitor'].interrogate().statistics[-1] AttributeError: 'NoneType' object has no attribute 'statistics' Thank you ! --------------060503080301050806000704 Content-Type: multipart/related; boundary="------------000103070605000308060409" --------------000103070605000308060409 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello, We have a small oVirt deplopyment, with 2 INTEL CPUs and 1 AMD, therefor we defined 2 clusters. One of the Intel machines is running the management as well (We called this SOL). This deployment is connected to a NAS through NFS shares. Suddenly (no more than 2 days) SOL is reported as "Non operational" and in the Action Items is saying "<img class="gwt-Image" onload='this.__gwtLastUnhandledEvent="load";' src="cid:part1.08080605.07050106@matrixrom.com" style="width: 14px; height: 12px; background: transparent url("data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAA4AAAAMCAYAAABSgIzaAAAAKklEQVR42mNgwAL+n0n7/3+mMRifSTP+z0AsGNVIC40gxciYgeZgcPoRAJrmd4n8GZZPAAAAAElFTkSuQmCC") no-repeat scroll 0px 0px; display: inline;" border="0"> <div> <div style="display: inline;" class="gwt-Label">Host failed to attach one of the Storage Domains attached to it." All other machines seems to be fine. In the past we encountered similar errors after (accidental) reboot of the hosts, but now it is not the case: [root@sol ~]# uptime 08:10:48 up 9 days, 15:48, 1 user, load average: 0.08, 0.05, 0.12 The "funny" is that the virtual machines already started on SOL are still running without any problems. I am not sure what logs to check. In /var/log/vdsm/vdsm.log we have this error, but I do not think it is relevant: Thread-38964::ERROR::2015-07-05 08:37:24,882::__init__::506::jsonrpc.JsonRpcServer::(_serveRequest) Internal server error Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/yajsonrpc/__init__.py", line 501, in _serveRequest res = method(**params) File "/usr/share/vdsm/rpc/Bridge.py", line 271, in _dynamicMethod result = fn(*methodArgs) File "/usr/share/vdsm/API.py", line 1330, in getStats stats.update(self._cif.mom.getKsmStats()) File "/usr/share/vdsm/momIF.py", line 60, in getKsmStats stats = self._mom.getStatistics()['host'] File "/usr/lib/python2.6/site-packages/mom/MOMFuncs.py", line 75, in getStatistics host_stats = self.threads['host_monitor'].interrogate().statistics[-1] AttributeError: 'NoneType' object has no attribute 'statistics' Thank you ! </div> </div> </body> </html> --------------000103070605000308060409-- --------------060503080301050806000704--

1 0

Re: [ovirt-users] VM run once API required
by Chandrahasa S 03 Jul '15

03 Jul '15

This is a multipart message in MIME format. --=_alternative 0026CB3D65257E77_= Content-Type: text/plain; charset="US-ASCII" Any one can help on this ?? Thanks & Regards From: Chandrahasa S/MUM/TCS To: Users(a)ovirt.org Date: 30-06-2015 11:46 Subject: VM run once API required Hi Experts, We are integrating RHEV(M) with our internal cloud portal using RHEV(M) API, we are able to provision Linux VM using API. But IP and Hostname not getting reflected on vm first boot. If we boot VM manually using run once its working fine. We are not able to find any run once API on RHEV end. Requested your help on this. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 0026CB3D65257E77_= Content-Type: text/html; charset="US-ASCII" Any one can help on this ?? Thanks & Regards From:        Chandrahasa S/MUM/TCS To:        Users(a)ovirt.org Date:        30-06-2015 11:46 Subject:        VM run once API required <hr noshade> Hi Experts, We are integrating RHEV(M) with our internal cloud portal using RHEV(M) API, we are able to provision Linux VM using API. But IP and Hostname not getting reflected on vm  first boot. If we boot VM manually using run once its working fine. We are not able to find any run once API on RHEV end. Requested your help on this. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 0026CB3D65257E77_=--

3 2

veam backup integration or equivalent.
by Nathanaël Blanchet 03 Jul '15

03 Jul '15

This is a multi-part message in MIME format. --------------060009030102000405000501 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: quoted-printable Hi all, I need advices about backing up vms. At this point, I can count three possible levels of backup: * lun snapshot on a FC/iSCSI SAN, but we save the whole storage domain * vm snapshot with the qemu capabilities * file system backup with a system like rsnaphot afaik, it will be possible to make LVM snapshot in the upcoming 3.6 To my mind the most convinient backup is the vm snapshot level, but the=20 backup API provided since 3.4 is difficult to use. At the end of=20 december, Lucas Vandroux (ovirt china) announciated the avaibility of=20 vm-backup-scheduler=20 (https://github.com/ovirt-china/vm-backup-scheduler) but I never=20 managed to make it work. A colleague told me about veam backup for backing up at vm level, but it=20 seems to support only hyper-V and vmware. Does it exist some equivalent? Good practices of senior sysadmin are welcome! --=20 Nathana=C3=ABl Blanchet Supervision r=C3=A9seau P=C3=B4le Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 =09 T=C3=A9l. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr --------------060009030102000405000501 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"content-type" content=3D"text/html; charset=3Dutf= -8"> </head> <body text=3D"#000000" bgcolor=3D"#FFFFFF"> Hi all, I need advices about backing up vms. At this point, I can count three possible levels of backup: <ul> <li>lun snapshot on a FC/iSCSI SAN, but we save the whole storage domain</li> <li>vm snapshot with the qemu capabilities</li> <li>file system backup with a system like rsnaphot</li> </ul> afaik, it will be possible to make LVM snapshot in the upcoming 3.6 To my mind the most convinient backup is the vm snapshot level, but the backup API provided since 3.4 is difficult to use. At the end of december, Lucas Vandroux (ovirt china) announciated the avaibility of vm-backup-scheduler (https= ://github.com/ovirt-china/vm-backup-scheduler), but I never managed to make it work. A colleague told me about veam backup for backing up at vm level, but it seems to support only hyper-V and vmware. Does it exist some equivalent? Good practices of senior sysadmin are welcome! <pre class=3D"moz-signature" cols=3D"72">--=20 Nathana=C3=ABl Blanchet Supervision r=C3=A9seau P=C3=B4le Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 =09 T=C3=A9l. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 <a class=3D"moz-txt-link-abbreviated" href=3D"mailto:blanchet@abes.fr">bl= anchet(a)abes.fr</a> </pre> </body> </html> --------------060009030102000405000501--

1 0

Re: [ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
by Julián Tete 03 Jul '15

03 Jul '15

I tried a different Aproach: One VLAN for each NIC I tried but not works.... I left the Virtual Machine pinging the Gateway after 10 minutes I left my Worstation alone and I went back to my home. Today i see the ping working (¿?) Maybe I rush too much...or maybe not. I reboot the Virtual Machine, same problem: after 15 minutes the Machine can't reach the Gateway, we need HA and 10+ minutes it's not considerated. After a I mess my oVirt LAB, after trying everything. This my last working setup with sloooooooooow reaching of Gateway: DATA CENTERS Logical Networks: ----------- Name: ovirtmgmt Description: Management Network Network Label: 1 MTU: Default ----------- Name: dmz Description: VLAN 50 Network Label: 50 Enable VLAN tagging: 50 VM network MTU: Default ----------- Name: Hosting Description: VLAN 100 Network Label: 100 Enable VLAN tagging: 100 VM network MTU: Default ------------ CLUSTERS Logical Networks ovirtmgmt Assign Required Display Network Migration Network dmz Assign Hosting Assign Required HOSTS Name: srvovirt02.cnsc.net Hostname/IP: 192.168.0.63 Network Interfaces HOSTS BOND VLAN NETWORK NAME ADDRESS MAC SPEED(Mbps) RX(Mbps) TX(Mbps) eno1 * ovirtmgmt 192.168.0.63 00:17:a4:77:00:18 10000 < 1 < 1 eno2 eno2.50 (50) dmz 192.168.50.8 00:17:a4:77:00:1a 10000 < 1 < 1 ens1f0 ens1f0.100 (100) Hosting 192.168.100.7 00:17:a4:77:00:1c 10000 < 1 < 1 ens1f1 00:17:a4:77:00:1e 0 < 1 < 1 Setup Hosts Networks Network: ovirtmgmt Static IP: 192.168.0.63 Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1 Custom Properties: No available keys Sync network: Yes Network: dmz Static IP: 192.168.50.8 Subnet Mask: 255.255.255.224 Gateway: 192.168.50.1 Custom Properties: Please select a key... Network: Hosting Static IP: 192.168.100.7 Subnet Mask: 255.255.255.240 Gateway: 192.168.100.1 Custom Properties: Please select a key... Virtual Machines Name: PruebaVLAN Host: srvovirt02.cnsc.net Edit Network Interface Name: nic1 Profile: dmz/dmz Type: VirtIO Custom MAC address: 00:00:1a:4a:3e:00 Link State: Up Card Status: Plugged Network Interfaces in the Host srvovirt02.cnsc.net: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovirtmgmt state UP qlen 1000 link/ether 00:17:a4:77:00:18 brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe77:18/64 scope link valid_lft forever preferred_lft forever 3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:17:a4:77:00:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe77:1a/64 scope link valid_lft forever preferred_lft forever 4: ens1f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:17:a4:77:00:1c brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe77:1c/64 scope link valid_lft forever preferred_lft forever 5: ens1f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:17:a4:77:00:1e brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN link/ether 72:f8:9c:75:e3:86 brd ff:ff:ff:ff:ff:ff 7: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master dmz state UNKNOWN qlen 500 link/ether fe:00:1a:4a:3e:00 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc00:1aff:fe4a:3e00/64 scope link valid_lft forever preferred_lft forever 17: eno2.50@eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master dmz state UP link/ether 00:17:a4:77:00:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe77:1a/64 scope link valid_lft forever preferred_lft forever 18: dmz: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:17:a4:77:00:1a brd ff:ff:ff:ff:ff:ff inet 192.168.50.8/27 brd 192.168.50.31 scope global dmz valid_lft forever preferred_lft forever inet6 fe80::217:a4ff:fe77:1a/64 scope link valid_lft forever preferred_lft forever 19: ens1f0.100@ens1f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master Hosting state UP link/ether 00:17:a4:77:00:1c brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe77:1c/64 scope link valid_lft forever preferred_lft forever 20: Hosting: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:17:a4:77:00:1c brd ff:ff:ff:ff:ff:ff inet 192.168.100.7/28 brd 192.168.100.15 scope global Hosting valid_lft forever preferred_lft forever inet6 fe80::217:a4ff:fe77:1c/64 scope link valid_lft forever preferred_lft forever 21: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:17:a4:77:00:18 brd ff:ff:ff:ff:ff:ff inet 192.168.0.63/24 brd 192.168.0.255 scope global ovirtmgmt valid_lft forever preferred_lft forever inet6 fe80::217:a4ff:fe77:18/64 scope link valid_lft forever preferred_lft forever 2015-06-30 21:34 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>: > You can count on it :) > > 2015-06-30 21:23 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: > >> Let us know how it works out, I am curious to see if having a untagged >> and tagged interface on the same bridge was an issue. >> On Jun 30, 2015 10:21 PM, "Julián Tete" <danteconrad14(a)gmail.com> wrote: >> >>> Thanks Donny, Tomorrow I'm going to try this. :) >>> >>> 2015-06-30 21:12 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>> >>>> That tells me that there is a tagging issue between the host and the >>>> switch. >>>> Untagged traffic flows without issue via the same interface as tagged >>>> traffic. >>>> As a personal best practice I separate access ports(untagged) and trunk >>>> ports (tagged) traffic on different physical ports. >>>> Can you setup a separate phys interface for the tagged traffic, or must >>>> you be able to pass both on the same interface. >>>> On Jun 30, 2015 10:05 PM, "Julián Tete" <danteconrad14(a)gmail.com> >>>> wrote: >>>> >>>>> My mgmt network works wonderfully, Virtual Machines created on the >>>>> mgmt even can reach Internet. But my company wants the traffic separated. >>>>> >>>>> Thanks Donny, I'm a RHCSA from Colombia, but I'm learning about oVirt. >>>>> (oVirt is a new thing in my country) >>>>> >>>>> P.S : I want to put VMware in the Trash Can too. ^_ ^ >>>>> >>>>> 2015-06-30 20:59 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>>>> >>>>>> There is a special place in my DC for vmware. TrashCan...lol >>>>>> On Jun 30, 2015 9:50 PM, "Julián Tete" <danteconrad14(a)gmail.com> >>>>>> wrote: >>>>>> >>>>>>> I'm going to check it out... but how the host can reach the Gateway >>>>>>> and the Virtual Machine inside doesn't ? >>>>>>> >>>>>>> Donny you are very kind, this the last step to free my DataCenter >>>>>>> from VMware. >>>>>>> >>>>>>> 2015-06-30 20:46 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>>>>>> >>>>>>>> Does your switch have an IP on that vlan... I would step things out >>>>>>>> VM>host>switch>rtr >>>>>>>> >>>>>>>> You have already confirmed VM to host. >>>>>>>> >>>>>>>> I'm going to look at your screens again to make sure I didn't miss >>>>>>>> anything >>>>>>>> On Jun 30, 2015 9:42 PM, "Julián Tete" <danteconrad14(a)gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Thanks for the explanation :) >>>>>>>>> >>>>>>>>> I set everything of the VLANs at oVirt, After I put a IP on the >>>>>>>>> Virtual Machine. But the Virtual Machine can't reach the gateway, The host >>>>>>>>> can do. The Virtual Machine only can reach the host. All the machines of >>>>>>>>> the range of net can reach the Virtual Machine. >>>>>>>>> >>>>>>>>> 2015-06-30 20:36 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>>>>>>>> >>>>>>>>>> I'm asking if your setting the vlan on the VM or at ovirt. >>>>>>>>>> >>>>>>>>>> More than likely if you are coming from VMware you have the Vlans >>>>>>>>>> set at the hypervisor. This does work in ovirt, I am doing it right now >>>>>>>>>> On Jun 30, 2015 9:31 PM, "Julián Tete" <danteconrad14(a)gmail.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Mmmm I'm new in oVirt :( >>>>>>>>>>> >>>>>>>>>>> VMs Interface is Virtual MachineS Interface or VM Network >>>>>>>>>>> Interface in the host ? >>>>>>>>>>> >>>>>>>>>>> I configured the IP of the VLAN in the host. >>>>>>>>>>> >>>>>>>>>>> I double check: the NIC of the Host has the VLAN assigned. >>>>>>>>>>> >>>>>>>>>>> Can you help me ? >>>>>>>>>>> >>>>>>>>>>> 2015-06-30 20:11 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>>>>>>>>>> >>>>>>>>>>>> Are you configuring the vms interface with the vlan or tagging >>>>>>>>>>>> at the host. >>>>>>>>>>>> On Jun 30, 2015 7:28 PM, "Julián Tete" <danteconrad14(a)gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Donny >>>>>>>>>>>>> >>>>>>>>>>>>> We have HP Switches (HP 5406zl) and they are configurated on >>>>>>>>>>>>> trunk mode. (VMware is configurated to use that). >>>>>>>>>>>>> >>>>>>>>>>>>> Any suggestion ? >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks for your response. >>>>>>>>>>>>> >>>>>>>>>>>>> :) >>>>>>>>>>>>> >>>>>>>>>>>>> 2015-06-30 17:51 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>>>>>>>>>>>> >>>>>>>>>>>>>> Vlans are layer 2, sounds like a tagging problem. Cisco >>>>>>>>>>>>>> switches? The tag sticks to the host bridge, but is being stripped off when >>>>>>>>>>>>>> it leaves the host.... Is your switch in access mode or trunk? >>>>>>>>>>>>>> Hi Friends of oVirt >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'm trying to migrate my company from VMware to oVirt. >>>>>>>>>>>>>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) >>>>>>>>>>>>>> The Virtual Machines in these VLANs, can be reached from the >>>>>>>>>>>>>> external IPs from the net range, >>>>>>>>>>>>>> but from the Virtual machines only can ping the Host with the >>>>>>>>>>>>>> Bridge and itself, can't reach the gateway. ¿? >>>>>>>>>>>>>> >>>>>>>>>>>>>> I configured a IP Forwarding in the Host with the virtual >>>>>>>>>>>>>> machine, and nothing changes... >>>>>>>>>>>>>> >>>>>>>>>>>>>> Any idea ? This is the last duty before embrace oVirt in the >>>>>>>>>>>>>> company. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Look to the VLAN 100 configuration (My desired VM Network): >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postimg.org/image/7hrog0a2n/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postimg.org/image/68b40i1vr/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postimg.org/image/lu6mlshgp/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postimg.org/image/540o1qc0t/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postimg.org/image/4kyg787bt/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postimg.org/image/v7ralh7zb/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postimg.org/image/kn903cl03/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> For any idea, thanks in advance >>>>>>>>>>>>>> >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>> >>>>> >>> >

2 3

Confused / Hosted-Engine won't start
by Christopher Young 02 Jul '15

02 Jul '15

I'm sure I have worked through this before, but I've been banging my head against this one for a while now, and I think I'm too close to the issue. Basically, my hosted-engine won't start anymore. I do recall attempting to migrate it to a new gluster-based NFS share recently, but I could have sworn that was successful and working. I _think_ I have some sort of id issue with storage/volume/whatever id's, but I need some help digging through it if someone would be so kind. I have the following error in /var/log/libvirt/qemu/HostedEngine.log: ---------- 2015-07-02T00:01:13.080952Z qemu-kvm: -drive file=/var/run/vdsm/storage/4e3017eb-d062-4ad1-9df8-7057fcee412c/5ead7b5d-50e8-4d6c-a0e5-bbe6d93dd836/eeb2d821-a432-4df6-8856-fdb14df260e3,if=none,id=drive-virtio-disk0,format=raw,serial=5ead7b5d-50e8-4d6c-a0e5-bbe6d93dd836,cache=none,werror=stop,rerror=stop,aio=threads: could not open disk image /var/run/vdsm/storage/4e3017eb-d062-4ad1-9df8-7057fcee412c/5ead7b5d-50e8-4d6c-a0e5-bbe6d93dd836/eeb2d821-a432-4df6-8856-fdb14df260e3: Could not refresh total sector count: Input/output error ---------- I also am including a few command outputs that I'm sure might help: ---------- [root@orldc-dev-vnode02 4e3017eb-d062-4ad1-9df8-7057fcee412c]# ls -la /var/run/vdsm/storage/4e3017eb-d062-4ad1-9df8-7057fcee412c/ total 8 drwxr-xr-x. 2 vdsm kvm 80 Jul 1 20:04 . drwxr-xr-x. 3 vdsm kvm 60 Jul 1 20:04 .. lrwxrwxrwx. 1 vdsm kvm 128 Jul 1 20:04 1d80a60c-8f26-4448-9460-2c7b00ff75bf -> /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/4e3017eb-d062-4ad1-9df8-7057fcee412c/images/1d80a60c-8f26-4448-9460-2c7b00ff75bf lrwxrwxrwx. 1 vdsm kvm 128 Jul 1 20:04 23ac8897-b0c7-41d6-a7de-19f46ed78400 -> /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/4e3017eb-d062-4ad1-9df8-7057fcee412c/images/23ac8897-b0c7-41d6-a7de-19f46ed78400 ---------- [root@orldc-dev-vnode02 4e3017eb-d062-4ad1-9df8-7057fcee412c]# cat /etc/ovirt-hosted-engine/vm.conf vmId=6b7329f9-518a-4488-b1c4-2cd809f2f580 memSize=5120 display=vnc devices={index:2,iface:ide,address:{ controller:0, target:0,unit:0, bus:1, type:drive},specParams:{},readonly:true,deviceId:77924fc2-c5c9-408b-97d3-cd0b0d11a62c,path:/home/tmp/CentOS-6.6-x86_64-minimal.iso,device:cdrom,shared:false,type:disk} devices={index:0,iface:virtio,format:raw,poolID:00000000-0000-0000-0000-000000000000,volumeID:eeb2d821-a432-4df6-8856-fdb14df260e3,imageID:5ead7b5d-50e8-4d6c-a0e5-bbe6d93dd836,specParams:{},readonly:false,domainID:4e3017eb-d062-4ad1-9df8-7057fcee412c,optional:false,deviceId:5ead7b5d-50e8-4d6c-a0e5-bbe6d93dd836,address:{bus:0x00, slot:0x06, domain:0x0000, type:pci, function:0x0},device:disk,shared:exclusive,propagateErrors:off,type:disk,bootOrder:1} devices={device:scsi,model:virtio-scsi,type:controller} devices={nicModel:pv,macAddr:00:16:3e:0e:d0:68,linkActive:true,network:ovirtmgmt,filter:vdsm-no-mac-spoofing,specParams:{},deviceId:f70ba622-6ac8-4c06-a005-0ebd940a15b2,address:{bus:0x00, slot:0x03, domain:0x0000, type:pci, function:0x0},device:bridge,type:interface} devices={device:console,specParams:{},type:console,deviceId:98386e6c-ae56-4b6d-9bfb-c72bbd299ad1,alias:console0} vmName=HostedEngine spiceSecureChannels=smain,sdisplay,sinputs,scursor,splayback,srecord,ssmartcard,susbredir smp=2 cpuType=Westmere emulatedMachine=pc ---------- [root@orldc-dev-vnode02 4e3017eb-d062-4ad1-9df8-7057fcee412c]# cat /etc/ovirt-hosted-engine/hosted-engine.conf fqdn=orldc-dev-vengine01.******* vm_disk_id=5ead7b5d-50e8-4d6c-a0e5-bbe6d93dd836 vmid=6b7329f9-518a-4488-b1c4-2cd809f2f580 storage=ovirt-gluster-nfs:/engine conf=/etc/ovirt-hosted-engine/vm.conf service_start_time=0 host_id=1 console=vnc domainType=nfs3 spUUID=379cf161-d5b1-4c20-bb71-e3ca5d2ccd6b sdUUID=4e3017eb-d062-4ad1-9df8-7057fcee412c connectionUUID=0d1b50ac-cf3f-4cd7-90df-3c3a6d11a984 ca_cert=/etc/pki/vdsm/libvirt-spice/ca-cert.pem ca_subject="C=EN, L=Test, O=Test, CN=Test" vdsm_use_ssl=true gateway=10.16.3.1 bridge=ovirtmgmt metadata_volume_UUID=dd9f373c-d161-4fa0-aab1-3cb52305dba7 metadata_image_UUID=23ac8897-b0c7-41d6-a7de-19f46ed78400 lockspace_volume_UUID=d9bacbf6-c2f4-4f74-a91f-3a3a52f255bf lockspace_image_UUID=1d80a60c-8f26-4448-9460-2c7b00ff75bf # The following are used only for iSCSI storage iqn= portal= user= password= port= ---------- (mount output for the NFS share this should be running on (gluster-based): ovirt-gluster-nfs:/engine on /rhev/data-center/mnt/ovirt-gluster-nfs:_engine type nfs (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,soft,nolock,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,mountaddr=10.16.3.30,mountvers=3,mountport=38465,mountproto=tcp,local_lock=all,addr=10.16.3.30) ---------- [root@orldc-dev-vnode02 4e3017eb-d062-4ad1-9df8-7057fcee412c]# tree /rhev/data-center/mnt/ovirt-gluster-nfs\:_engine/ /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/ ├── 4e3017eb-d062-4ad1-9df8-7057fcee412c │ ├── dom_md │ │ ├── ids │ │ ├── inbox │ │ ├── leases │ │ ├── metadata │ │ └── outbox │ ├── ha_agent │ │ ├── hosted-engine.lockspace -> /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/4e3017eb-d062-4ad1-9df8-7057fcee412c/images/1d80a60c-8f26-4448-9460-2c7b00ff75bf/d9bacbf6-c2f4-4f74-a91f-3a3a52f255bf │ │ └── hosted-engine.metadata -> /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/4e3017eb-d062-4ad1-9df8-7057fcee412c/images/23ac8897-b0c7-41d6-a7de-19f46ed78400/dd9f373c-d161-4fa0-aab1-3cb52305dba7 │ ├── images │ │ ├── 1d80a60c-8f26-4448-9460-2c7b00ff75bf │ │ │ ├── d9bacbf6-c2f4-4f74-a91f-3a3a52f255bf │ │ │ ├── d9bacbf6-c2f4-4f74-a91f-3a3a52f255bf.lease │ │ │ └── d9bacbf6-c2f4-4f74-a91f-3a3a52f255bf.meta │ │ ├── 23ac8897-b0c7-41d6-a7de-19f46ed78400 │ │ │ ├── dd9f373c-d161-4fa0-aab1-3cb52305dba7 -> /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/4e3017eb-d062-4ad1-9df8-7057fcee412c/images/23ac8897-b0c7-41d6-a7de-19f46ed78400 │ │ │ ├── dd9f373c-d161-4fa0-aab1-3cb52305dba7.lease │ │ │ └── dd9f373c-d161-4fa0-aab1-3cb52305dba7.meta │ │ ├── 3278c444-d92a-4cb9-87d6-9669c6e4993e │ │ │ ├── 1a4b6a5d-9c8f-4d54-91a7-3dd87377c362 │ │ │ ├── 1a4b6a5d-9c8f-4d54-91a7-3dd87377c362.lease │ │ │ └── 1a4b6a5d-9c8f-4d54-91a7-3dd87377c362.meta │ │ ├── 5ead7b5d-50e8-4d6c-a0e5-bbe6d93dd836 │ │ │ ├── eeb2d821-a432-4df6-8856-fdb14df260e3.lease │ │ │ └── eeb2d821-a432-4df6-8856-fdb14df260e3.meta │ │ ├── 6064179f-2720-4db9-a7c4-a97e044c2238 │ │ │ ├── 05afaa26-95af-4226-9a00-5383d8937a83 │ │ │ ├── 05afaa26-95af-4226-9a00-5383d8937a83.lease │ │ │ └── 05afaa26-95af-4226-9a00-5383d8937a83.meta │ │ └── bb9d9a37-4f91-4973-ba9e-72ee81aed0b6 │ │ ├── 5acb27b3-62c5-46ac-8978-576a8a4a0399 │ │ ├── 5acb27b3-62c5-46ac-8978-576a8a4a0399.lease │ │ └── 5acb27b3-62c5-46ac-8978-576a8a4a0399.meta │ └── master │ ├── tasks │ │ └── fef13299-0e7f-4c7a-a399-092a1235faab │ │ ├── fef13299-0e7f-4c7a-a399-092a1235faab.job.0 │ │ ├── fef13299-0e7f-4c7a-a399-092a1235faab.recover.0 │ │ ├── fef13299-0e7f-4c7a-a399-092a1235faab.recover.1 │ │ ├── fef13299-0e7f-4c7a-a399-092a1235faab.result │ │ └── fef13299-0e7f-4c7a-a399-092a1235faab.task │ └── vms └── __DIRECT_IO_TEST__ 16 directories, 28 files ---------- [root@orldc-dev-vnode02 4e3017eb-d062-4ad1-9df8-7057fcee412c]# tree /var/run/vdsm/storage/4e3017eb-d062-4ad1-9df8-7057fcee412c /var/run/vdsm/storage/4e3017eb-d062-4ad1-9df8-7057fcee412c ├── 1d80a60c-8f26-4448-9460-2c7b00ff75bf -> /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/4e3017eb-d062-4ad1-9df8-7057fcee412c/images/1d80a60c-8f26-4448-9460-2c7b00ff75bf └── 23ac8897-b0c7-41d6-a7de-19f46ed78400 -> /rhev/data-center/mnt/ovirt-gluster-nfs:_engine/4e3017eb-d062-4ad1-9df8-7057fcee412c/images/23ac8897-b0c7-41d6-a7de-19f46ed78400 2 directories, 0 files ---------- Can you anyone point me in the right direction here? Eventually, I'd like to get this hosted-engine running in HA mode (I had started this process with ctdb/gluster/etc. via the well-known guide out there), but I'm thinking that at this point, I should get this up and running again, export everything, and perhaps just build a new hosted-engine and import things into (if that is possible). Right now, though, I just need to get this hosted-engine run. Many many thanks! Chris

3 7