el6 and el7 clusters and SPM
by Sigbjorn Lie
Hi
I am looking to migrate several el6 rhev-h nodes to el7 rhev-h nodes. There are multiple clusters
in the datacenter and it will take a while (several months) to have all the clusters in the data
center migrated to el7.
Is there be any potential issues to look out for with regards to having the SPM for this
datacenter running on a el6 or a el7 node in this datacenter? Any cross compatability issues to
look out for?
RHEV-M is currently at version 3.5.6. We are using FC storage.
Regards,
Siggi
8 years, 1 month
vlan range?
by gflwqs gflwqs
Hi list!
How do i expose a vlan range to a vm in ovirt?
Thanks!
Christian
8 years, 1 month
QEMU GlusterFS support in oVirt
by Samuli Heinonen
Hello all,
It seems that oVirt 3.6 is still using FUSE to access GlusterFS storage domains instead of using QEMU driver (libgfapi). As far as I know libgfapi support should be available in Libvirt and QEMU packages provided in CentOS 7. Is there any workarounds how to use libgfapi with oVirt before it’s officially available?
Best regards,
Samuli Heinonen
8 years, 1 month
MAC spoofing for specific VMs
by Christopher Young
I'm working on some load-balancing solutions and they appear to require MAC
spoofing. I did some searching and reading and as I understand it, you can
disable the MAC spoofing protection through a few methods.
I was wondering about the best manner to enable this for the VMs that
require it and not across the board (if that is even possible). I'd like
to just allow my load-balancer VMs to do what they need to, but keep the
others untouched as a security mechanism.
If anyone has any advice on the best method to handle this scenario, I
would greatly appreciate it. It seems that this might turn into some type
of feature request, though I'm not sure if this is something that has to be
done at the Linux bridge level, the port level, or the VM level. Any
explanations into that would also help in my education.
Thanks,
Chris
8 years, 1 month
Configuring the SRIOV virsh device
by David LeVene
--_000_BLUPR0301MB1971508A98EC31035499673AE9B30BLUPR0301MB1971_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hey All,
Still trying to work through this VMFEX stuff, and I know what I want the f=
ile to look like at the end.. but not sure how to achieve it from the doco =
written here
http://www.ovirt.org/develop/developer-guide/vdsm/hook/vmfex/
and
http://www.ovirt.org/develop/release-management/features/network/ucs-integr=
ation/
Currently my device looks like this
# virsh -r net-dumpxml vdsm-SRIOV
<network>
<name>vdsm-SRIOV</name>
<forward mode=3D'bridge'/>
<bridge name=3D'SRIOV'/>
</network>
I want it looking like this, then the networking will be as it should be!
A port group would be a vNIC Profile from the looks of things...
<name>vdsm-SRIOV</name>
<forward dev=3D'enp6s0f1' mode=3D'passthrough'> =
<-- defined as a passthrough device, not a bridge
<interface dev=3D'enp6s0f1'/>
<interface dev=3D'enp6s0f2'/>
<interface dev=3D'enp6s0f3'/>
<interface dev=3D'enp6s0f4'/>
< .. list of interfaces available to it which would need to be manually i=
nputted as a hook>
</forward>
<portgroup name=3D'ame1-test1'>
<virtualport type=3D'802.1Qbh'>
<parameters profileid=3D'profile-ame1-test1'/>
</virtualport>
</portgroup>
<portgroup name=3D'ame1-prep1'>
<virtualport type=3D'802.1Qbh'>
<parameters profileid=3D'profile-ame1-prep1'/>
</virtualport>
</portgroup>
</network>
Cheers
David
This email and any attachments may contain confidential and proprietary inf=
ormation of Blackboard that is for the sole use of the intended recipient. =
If you are not the intended recipient, disclosure, copying, re-distribution=
or other use of any of this information is strictly prohibited. Please imm=
ediately notify the sender and delete this transmission if you received thi=
s email in error.
--_000_BLUPR0301MB1971508A98EC31035499673AE9B30BLUPR0301MB1971_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"EN-AU" link=3D"#0563C1" vlink=3D"#954F72">
<div class=3D"WordSection1">
<p class=3D"MsoNormal">Hey All,<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Still trying to work through this VMFEX stuff, and I=
know what I want the file to look like at the end.. but not sure how to ac=
hieve it from the doco written here<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"><a href=3D"http://www.ovirt.org/develop/developer-gu=
ide/vdsm/hook/vmfex/">http://www.ovirt.org/develop/developer-guide/vdsm/hoo=
k/vmfex/</a><o:p></o:p></p>
<p class=3D"MsoNormal">and<o:p></o:p></p>
<p class=3D"MsoNormal"><a href=3D"http://www.ovirt.org/develop/release-mana=
gement/features/network/ucs-integration/">http://www.ovirt.org/develop/rele=
ase-management/features/network/ucs-integration/</a><o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Currently my device looks like this<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"># virsh -r net-dumpxml vdsm-SRIOV<o:p></o:p></p>
<p class=3D"MsoNormal"><network><o:p></o:p></p>
<p class=3D"MsoNormal"> <name>vdsm-SRIOV</name><o:p></o:p=
></p>
<p class=3D"MsoNormal"> <forward mode=3D'bridge'/><o:p></o:p></p=
>
<p class=3D"MsoNormal"> <bridge name=3D'SRIOV'/><o:p></o:p></p>
<p class=3D"MsoNormal"></network><o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">I want it looking like this, then the networking wil=
l be as it should be!<o:p></o:p></p>
<p class=3D"MsoNormal">A port group would be a vNIC Profile from the looks =
of things…<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"> <name>vdsm-SRIOV</name><o:p></o:p=
></p>
<p class=3D"MsoNormal"> <forward dev=3D'enp6s0f1' mode=3D'passthro=
ugh'> &=
nbsp; &nbs=
p;
<span style=3D"font-family:Wingdings">ß</span> defined as a passthrou=
gh device, not a bridge<o:p></o:p></p>
<p class=3D"MsoNormal"> <interface dev=3D'enp6s0f1'/&g=
t;<o:p></o:p></p>
<p class=3D"MsoNormal"> <interface dev=3D'enp6s0f2'/&g=
t;<o:p></o:p></p>
<p class=3D"MsoNormal"> <interface dev=3D'enp6s0f3'/&g=
t;<o:p></o:p></p>
<p class=3D"MsoNormal"> <interface dev=3D'enp6s0f4'/&g=
t;<o:p></o:p></p>
<p class=3D"MsoNormal">< .. list of interfaces available to =
it which would need to be manually inputted as a hook><o:p></o:p></p>
<p class=3D"MsoNormal"> </forward><o:p></o:p></p>
<p class=3D"MsoNormal"> <portgroup name=3D'ame1-test1'><o:p></o=
:p></p>
<p class=3D"MsoNormal"> <virtualport type=3D'802.1Qbh'=
><o:p></o:p></p>
<p class=3D"MsoNormal"> <parameters profil=
eid=3D'profile-ame1-test1'/><o:p></o:p></p>
<p class=3D"MsoNormal"> </virtualport><o:p></o:p></=
p>
<p class=3D"MsoNormal"> </portgroup> <o:p></o:p></p>
<p class=3D"MsoNormal"> <portgroup name=3D'ame1-prep1'><o:=
p></o:p></p>
<p class=3D"MsoNormal"> <virtualport type=3D'802.1Qbh'=
><o:p></o:p></p>
<p class=3D"MsoNormal"> <parameters profil=
eid=3D'profile-ame1-prep1'/><o:p></o:p></p>
<p class=3D"MsoNormal"> </virtualport><o:p></o:p></=
p>
<p class=3D"MsoNormal"> </portgroup><o:p></o:p></p>
<p class=3D"MsoNormal"></network><o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Cheers<o:p></o:p></p>
<p class=3D"MsoNormal">David<o:p></o:p></p>
</div>
This email and any attachments may contain confidential and proprietary inf=
ormation of Blackboard that is for the sole use of the intended recipient. =
If you are not the intended recipient, disclosure, copying, re-distribution=
or other use of any of this information
is strictly prohibited. Please immediately notify the sender and delete th=
is transmission if you received this email in error.
</body>
</html>
--_000_BLUPR0301MB1971508A98EC31035499673AE9B30BLUPR0301MB1971_--
8 years, 1 month
Understand CPU Socket Cores and VCPU
by Taste-Of-IT
Hello,
i have a general Question about Hardware CPU, Socket, Cores and the
VCPU, Cores per VSocket and VScoket for virtual Machines. Example i have
a single CPU with 4 Cores and 8 Threads. As far as i understand i should
configure the virtual machines with that number of socket as the host
has. So in this example with max 1 Socket. How is the possibility in
VCPUs and VCores? What is the limit in this example? Can i only run max
4 VMs?
Thanks for clarifying
Taste
8 years, 1 month
Installation of host hangs and will not finish installation of host
by Jonas Kirk Pedersen
Im and quite new at using mailing list, but here is my current challenge.
I am adding a new host from a fresh install centos 7. Updated with yum
-y update and yum install then repo from ovirt v.3.6.
Now the installation of the host is stuck at validating for 2 hours.
Have tried to restart vdsmd to see if I cant trigger a failure, but no.
Did a reboot of the host and that did not help.
Now it is powered off and the engine is has registered that there is no
connection to the host with error: "VDSM KVM2 command failed: Connection
issue null"
Is there a way to cancel a running task?
--
Jonas Kirk Pedersen
ASOM-Net
Systemadministrator
8 years, 1 month
VDSM will not start
by Jonas Kirk Pedersen
This is a multi-part message in MIME format.
--------------080709040101080905010803
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Had a problem where on the host the vdsm service would not start. The
following is from #ovirt IRC chat after I emailed the sos report from
the host
13:29:06) sbonazzo: jkp looks like an issue while starting supervdsm, I
see:
(13:29:08) sbonazzo: Mar 9 12:41:30 kvm1 daemonAdapter: OSError: [Errno
2] No such file or directory: '/var/run/vdsm/svdsm.sock'
(13:29:08) sbonazzo: Mar 9 12:41:30 kvm1 systemd: start request repeated
too quickly for supervdsmd.service
(13:29:26) sbonazzo: danken: ybronhei: nsoffer ^^
(13:30:57) sbonazzo: msivak: i see also Mar 9 12:27:18 kvm1 systemd:
[/usr/lib/systemd/system/momd.service:11] Unknown lvalue 'Timeout' in
section 'Service'
(13:31:30) sbonazzo: msivak: maybe epel7 mom should be updated
(13:32:33) sbonazzo: after that, vdsm doesn't come up due to Mar 9
12:27:55 kvm1 daemonAdapter: OSError: [Errno 2] No such file or
directory: '/var/run/vdsm/svdsm.sock since supervdsmd didn't run
(13:34:50) sbonazzo: jkp: can you try to manually start supervdsmd service?
(13:35:07) jkp: sbonazzo, it is confirmed that the file is not there.
But shouldn't the service create this file -- Yes I'll try
(13:35:19) sbonazzo: jkp: yes, it's supposed to
(13:39:07) jkp: sbonazzo, still gives me the : OSError: [Errno 2] No
such file or directory: '/var/run/vdsm/svdsm.sock'
(13:39:35) sbonazzo: jkp does /var/run/vdsm/ exist?
(13:40:55) jkp: sbonazzo, yes it contains [root@kvm1 ~]# ls
/var/run/vdsm/ lvm sourceRoutes trackedInterfaces v2v
Later I received a email
Mar 9 10:41:21 kvm1 journal: Module /usr/lib64/libvirt/connection-driver/libvirt_driver_lxc.so not accessible
Mar 9 10:41:21 kvm1 journal: The server certificate /etc/pki/vdsm/certs/vdsmcert.pem is not yet active
Mar 9 10:41:21 kvm1 systemd: libvirtd.service: main process exited, code=exited, status=6/NOTCONFIGURED
Mar 9 10:41:21 kvm1 systemd: Failed to start Virtualization daemon.
Mar 9 10:41:21 kvm1 systemd: Dependency failed for Virtual Desktop Server Manager.
Mar 9 10:41:21 kvm1 systemd: Dependency failed for MOM instance configured for VDSM purposes.
Mar 9 10:41:21 kvm1 systemd: Job mom-vdsm.service/start failed with result 'dependency'.
Mar 9 10:41:21 kvm1 systemd: Job vdsmd.service/start failed with result 'dependency'.
Mar 9 10:41:21 kvm1 systemd: Dependency failed for Virtual Desktop Server Manager network restoration.
Mar 9 10:41:21 kvm1 systemd: Job vdsm-network.service/start failed with result 'dependency'.
Mar 9 10:41:21 kvm1 systemd: Unit libvirtd.service entered failed state.
Mar 9 10:41:21 kvm1 systemd: libvirtd.service failed.
Mar 9 10:41:21 kvm1 systemd-logind: Removed session 4.
Mar 9 10:41:21 kvm1 systemd: libvirtd.service holdoff time over, scheduling restart.
I see that libvirtd fails to start.
It might be due to Engine system clock being deep in the future?
What I had failed to notice was that the vdsmcert.pem that was not active.
The ntp service running on the Engine was out of sync with a year
resulting in that of cause the certificate did not work and then the
vdsm would not start.
I have a fairly new engine so I removed it and fixed the time issue and
all was perfect
Thanks for a great help on the chat and on email
--
Jonas Kirk Pedersen
ASOM-Net
Systemadministrator
--------------080709040101080905010803
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Had a problem where on the host the vdsm service would not start.
The following is from #ovirt IRC chat after I emailed the sos report
from the host<br>
<br>
<font size="2"><font color="#204a87">13:29:06) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>jkp
looks like an issue while starting supervdsm, I see: <br>
<font size="2"><font color="#204a87">(13:29:08) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>Mar
9 12:41:30 kvm1 daemonAdapter: OSError: [Errno 2] No such file or
directory: '/var/run/vdsm/svdsm.sock'<br>
<font size="2"><font color="#204a87">(13:29:08) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>Mar
9 12:41:30 kvm1 systemd: start request repeated too quickly for
supervdsmd.service<br>
<font size="2"><font color="#204a87">(13:29:26) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>danken:
ybronhei: nsoffer ^^<br>
<font size="2"><font color="#204a87">(13:30:57) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>msivak:
i see also Mar 9 12:27:18 kvm1 systemd:
[/usr/lib/systemd/system/momd.service:11] Unknown lvalue 'Timeout'
in section 'Service'<br>
<font size="2"><font color="#204a87">(13:31:30) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>msivak:
maybe epel7 mom should be updated<br>
<font size="2"><font color="#204a87">(13:32:33) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>after
that, vdsm doesn't come up due to Mar 9 12:27:55 kvm1 daemonAdapter:
OSError: [Errno 2] No such file or directory:
'/var/run/vdsm/svdsm.sock since supervdsmd didn't run<br>
<font size="2"><font color="#204a87">(13:34:50) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>jkp:
can you try to manually start supervdsmd service?<br>
<font size="2"><font color="#af7f00">(13:35:07) </font></font><span
style="font-weight:bold;color:rgb(175,127,0)">jkp: </span>sbonazzo,
it is confirmed that the file is not there. But shouldn't the
service create this file -- Yes I'll try<br>
<font size="2"><font color="#204a87">(13:35:19) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>jkp:
yes, it's supposed to<br>
<font size="2"><font color="#af7f00">(13:39:07) </font></font><span
style="font-weight:bold;color:rgb(175,127,0)">jkp: </span>sbonazzo,
still gives me the : OSError: [Errno 2] No such file or directory:
'/var/run/vdsm/svdsm.sock'<br>
<font size="2"><font color="#204a87">(13:39:35) </font></font><span
style="font-weight:bold;color:rgb(32,74,135)">sbonazzo: </span>jkp
does /var/run/vdsm/ exist?<br>
<font size="2"><font color="#af7f00">(13:40:55) </font></font><span
style="font-weight:bold;color:rgb(175,127,0)">jkp: </span>sbonazzo,
yes it contains [root@kvm1 ~]# ls /var/run/vdsm/ lvm sourceRoutes
trackedInterfaces v2v<br>
<br>
Later I received a email <br>
<pre class="moz-signature" cols="72">Mar 9 10:41:21 kvm1 journal: Module /usr/lib64/libvirt/connection-driver/libvirt_driver_lxc.so not accessible
Mar 9 10:41:21 kvm1 journal: The server certificate /etc/pki/vdsm/certs/vdsmcert.pem is not yet active
Mar 9 10:41:21 kvm1 systemd: libvirtd.service: main process exited, code=exited, status=6/NOTCONFIGURED
Mar 9 10:41:21 kvm1 systemd: Failed to start Virtualization daemon.
Mar 9 10:41:21 kvm1 systemd: Dependency failed for Virtual Desktop Server Manager.
Mar 9 10:41:21 kvm1 systemd: Dependency failed for MOM instance configured for VDSM purposes.
Mar 9 10:41:21 kvm1 systemd: Job mom-vdsm.service/start failed with result 'dependency'.
Mar 9 10:41:21 kvm1 systemd: Job vdsmd.service/start failed with result 'dependency'.
Mar 9 10:41:21 kvm1 systemd: Dependency failed for Virtual Desktop Server Manager network restoration.
Mar 9 10:41:21 kvm1 systemd: Job vdsm-network.service/start failed with result 'dependency'.
Mar 9 10:41:21 kvm1 systemd: Unit libvirtd.service entered failed state.
Mar 9 10:41:21 kvm1 systemd: libvirtd.service failed.
Mar 9 10:41:21 kvm1 systemd-logind: Removed session 4.
Mar 9 10:41:21 kvm1 systemd: libvirtd.service holdoff time over, scheduling restart.
I see that libvirtd fails to start.
It might be due to Engine system clock being deep in the future?
</pre>
What I had failed to notice was that the vdsmcert.pem that was not
active.<br>
The ntp service running on the Engine was out of sync with a year
resulting in that of cause the certificate did not work and then the
vdsm would not start. <br>
I have a fairly new engine so I removed it and fixed the time issue
and all was perfect<br>
<br>
Thanks for a great help on the chat and on email<br>
<pre class="moz-signature" cols="72">
</pre>
<pre class="moz-signature" cols="72">--
Jonas Kirk Pedersen
ASOM-Net
Systemadministrator
</pre>
</body>
</html>
--------------080709040101080905010803--
8 years, 1 month
The bumpy road to Ceph
by Bond, Darryl
We intend to migrate off our small Openstack/Ceph cluster to oVirt as it is a better fit for our organisation.
We wanted to run oVirt backed on to Ceph storage for quite some time. We waited for the 3.6 development to take it's course and started testing last year.
The kolla cinder container implementation changed fundamentally in the middle of the oVirt release process which broke the oVirt 'official' cinder implementation.
We had tested oVirt using our Openstack cinder so we knew it basically worked but we didn't want to mix the oVirt and Openstack volumes, ie put oVirt into it's own ceph pool.
We waited and waited for the Kolla container ...
There didn't seem to be any end in sight, so we chose the following configuration:
- Hosted engine on Centos 7.2 with gluster storage
- Cinder/Keystone VM on Centos 7.2 using RDO and cinder 'liberty' kept in the same gluster store as the engine and managed by the engine.
- Used the oVirt engine Postgres database as the Cinder/Keystone store so we didn't introduce more dependencies with MySQL that Kolla required.
(New user and database for the cinder store. Backups exported separate to the engine backups)
It's early days yet but here are some observations:
- It works very well integrated with oVirt from the point of view of building and managing new VM's
- Snapshots and cloning use ceph's features
- No simple means to move Vm disks to and from other storage domains.
- Not impossible though, it means that you have to delete and import ceph RBD's behind both oVirt and Cinder. It is fairly dangerous as I haven't found a simple way to get the rbd volume name with vdsClient other than 'vdsClient list' running VM's. Openstack at least publishes the volume name (UUID) in the gui, oVirt does not.
- Successfully imported VM images from both Openstack and VMWare.
- There is a hard dependency between oVirt and Cinder when starting VM's but does not require Cinder to run VMs. Strange really, when the volume name could be stored in oVirt when the volume is created rather than query cinder for each start.
Where to from here.
Hosting Cinder/Keystone in containers on the engine VM makes sense.
We are going to roll our own container(s), given the data will be in the engine Postgres database it should be possible to transition in a clean fassion.
Darryl
________________________________
The contents of this electronic message and any attachments are intended only for the addressee and may contain legally privileged, personal, sensitive or confidential information. If you are not the intended addressee, and have received this email, any transmission, distribution, downloading, printing or photocopying of the contents of this message or attachments is strictly prohibited. Any legal privilege or confidentiality attached to this message and attachments is not waived, lost or destroyed by reason of delivery to any person other than intended addressee. If you have received this message and are not the intended addressee you should notify the sender by return email and destroy all copies of the message and any attachments. Unless expressly attributed, the views expressed in this email do not necessarily represent the views of the company.
8 years, 1 month
Admin lockout
by Clint Boggio
I had a keyboard problem and entered the wrong password for admin@internal enough times to finally lock the account.
How do I recover from this ?
OVirt engine 3.6.2
8 years, 1 month
