Info on manual operations after removing FC storage domain
by Gianluca Cecchi
Hello,
I'm relocating some disks from some storage domains to other ones.
At the end I'm going to remove source storage domains.
All the SD involved are FC and the hosts are CentOS 7.4
I see that after removing an SD from oVirt, the multipath part on host
remains.
What is the correct sequence of operations to do at hosts' side after
completing the Webadmin Gui part?
Some questions:
- do the remove SD from gui imply vgchange -an of the VG and vgremove of
the vg?
Or are they delegated to post actions?
- do it imply the pvremove on the LUN?
After clearing what above I would imagine remaining steps would be, based
on my previous similar experience with iSCSI removal on physical servers:
- take note of the paths sdY, ... of mpathX
- remove the multipath device with
multipath -f mpathX
- flush the single paths devices
blockdev --flushbufs sdY for every path of the previous taken note ones
- remove single path devices
echo 1 > /sys/block/sdY/device/delete
- remove LUN from storage array
when previous steps done on all the hypervisors
Any comment?
Any further step at vdsm level files..?
Thanks in advance,
Gianluca
6 years, 6 months
Maximum storage per VM?
by Dmitri Chebotarov
Hello
I'm trying to find any info on how much storage I can attach to a VM.
Is there a recommended/maximum for number of disks and maximum disk size?
I'm using GlusterFS as backend storage for the cluster.
The VM uses LVM (/w striped volumes) to manage attached disks.
Thank you,
--
Dmitri Chebotarov.
George Mason University,
4400 University Drive,
Fairfax, VA, 22030
GPG Public key# 5E19F14D: [https://goo.gl/SlE8tj]
6 years, 6 months
VM Serial Port connection to network port
by Gagandeep Arora
Hi,
Is it possible to configure a VM with a serial port connecting to network
port in client mode? Can someone point me in the right direction on how to
do this in ovirt. We are running ovirt-4.0.6.3-1.1.
Regards,
Gagan
6 years, 6 months
Re: [ovirt-users] ovirt-engine-extension-aaa-ldap active directory
by Luca 'remix_tj' Lorenzetto
On Tue, Oct 10, 2017 at 4:41 PM, nicola gentile
<nicola.gentile.to(a)gmail.com> wrote:
> I run the command you suggest
> ldapsearch -h domaincontroller.dom.it -b "dc=dom,dc=it" -D user(a)dom.it
> -W -x sAMAccountName=user_to_search userPrincipalName | grep
> userPrincipalName
>
> This is the result:
>
> Enter LDAP Password:
> # requesting: userPrincipalName
>
Supposing you're using all the right parameters in ldapsearch command,
it seems that the user you were looking up is not a valid user in that
directory server.
Please check with someone that can access to AD and verify the status
of the user with ADSI Edit.
Luca
--
"E' assurdo impiegare gli uomini di intelligenza eccellente per fare
calcoli che potrebbero essere affidati a chiunque se si usassero delle
macchine"
Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716)
"Internet è la più grande biblioteca del mondo.
Ma il problema è che i libri sono tutti sparsi sul pavimento"
John Allen Paulos, Matematico (1945-vivente)
Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>
6 years, 6 months
Re: [ovirt-users] ovirt-engine-extension-aaa-ldap active directory
by nicola gentile
yes is AD.
Nick
2017-10-10 16:41 GMT+02:00 nicola gentile <nicola.gentile.to(a)gmail.com>:
> I run the command you suggest
> ldapsearch -h domaincontroller.dom.it -b "dc=dom,dc=it" -D user(a)dom.it
> -W -x sAMAccountName=user_to_search userPrincipalName | grep
> userPrincipalName
>
> This is the result:
>
> Enter LDAP Password:
> # requesting: userPrincipalName
>
> Nick
>
> 2017-10-10 16:21 GMT+02:00 Luca 'remix_tj' Lorenzetto
> <lorenzetto.luca(a)gmail.com>:
>> On Tue, Oct 10, 2017 at 4:06 PM, nicola gentile
>> <nicola.gentile.to(a)gmail.com> wrote:
>>> include = <ad.properties>
>>>
>>> vars.domain = dom.it
>>> vars.user = CN=myuser,OU=spuser,DC=dom,DC=it
>>> vars.password = xxxxxxxxx
>>>
>>> pool.default.auth.simple.bindDN = ${global:vars.user}
>>> pool.default.auth.simple.password = ${global:vars.password}
>>> pool.default.serverset.type = srvrecord
>>> pool.default.serverset.srvrecord.domain = ${global:vars.domain}
>>> pool.default.ssl.startTLS = true
>>> pool.default.ssl.truststore.file = ${local:_basedir}/polito.it.jks
>>> pool.default.ssl.truststore.password = changeit
>>
>> It's an AD?
>>
>> Can you check if userPrincipalName of the user you're trying to use
>> for connecting contains the login name in the format of
>> user(a)domain.fqdn?
>>
>> I had issues with users that had userPrincipalName wrongly formatted.
>> You should find nicola.gentile(a)polito.it on that field.
>>
>> You can check in this way:
>>
>> ldapsearch -h domaincontroller.dom.it -b "dc=dom,dc=it" -D user(a)dom.it
>> -W -x sAMAccountName=user_to_search userPrincipalName | grep
>> userPrincipalName
>>
>>
>> Luca
>>
>>
>>
>> --
>> "E' assurdo impiegare gli uomini di intelligenza eccellente per fare
>> calcoli che potrebbero essere affidati a chiunque se si usassero delle
>> macchine"
>> Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716)
>>
>> "Internet è la più grande biblioteca del mondo.
>> Ma il problema è che i libri sono tutti sparsi sul pavimento"
>> John Allen Paulos, Matematico (1945-vivente)
>>
>> Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>
6 years, 6 months
Re: [ovirt-users] ovirt-engine-extension-aaa-ldap active directory
by Luca 'remix_tj' Lorenzetto
On Tue, Oct 10, 2017 at 4:06 PM, nicola gentile
<nicola.gentile.to(a)gmail.com> wrote:
> include = <ad.properties>
>
> vars.domain = dom.it
> vars.user = CN=myuser,OU=spuser,DC=dom,DC=it
> vars.password = xxxxxxxxx
>
> pool.default.auth.simple.bindDN = ${global:vars.user}
> pool.default.auth.simple.password = ${global:vars.password}
> pool.default.serverset.type = srvrecord
> pool.default.serverset.srvrecord.domain = ${global:vars.domain}
> pool.default.ssl.startTLS = true
> pool.default.ssl.truststore.file = ${local:_basedir}/polito.it.jks
> pool.default.ssl.truststore.password = changeit
It's an AD?
Can you check if userPrincipalName of the user you're trying to use
for connecting contains the login name in the format of
user(a)domain.fqdn?
I had issues with users that had userPrincipalName wrongly formatted.
You should find nicola.gentile(a)polito.it on that field.
You can check in this way:
ldapsearch -h domaincontroller.dom.it -b "dc=dom,dc=it" -D user(a)dom.it
-W -x sAMAccountName=user_to_search userPrincipalName | grep
userPrincipalName
Luca
--
"E' assurdo impiegare gli uomini di intelligenza eccellente per fare
calcoli che potrebbero essere affidati a chiunque se si usassero delle
macchine"
Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716)
"Internet è la più grande biblioteca del mondo.
Ma il problema è che i libri sono tutti sparsi sul pavimento"
John Allen Paulos, Matematico (1945-vivente)
Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>
6 years, 6 months
ovirt-engine-extension-aaa-ldap active directory
by nicola.gentile.to
Hi,
I have a problem. Suddenly from the user portal the users of AD not
login and displays the error:
server_error: Unexpected comma or semicolon found at the end of the DN
string.
Also, from Admin Portal ->Users when I try to add a user of AD I don't
see the sub domain
Also, I try to run ovirt-engine-extension-aaa-ldap-setup but not works.
I attach the log file.
please help me
Thanks
Nick
6 years, 6 months
multipath configuration for local disks?
by Matthias Leopold
hi,
i'm using three different generations of hardware for my oVirt
hypervisor hosts. they are not exactly the "same", but very "similar".
- all were installed with oVirt Node 4.1.x installers
- all have (2-4) local SSD disks for oVirt Node OS
- all were configured with manual partitioning and SW RAID 1 with two
SSD disks for oVirt Node OS
after initializing the third generation of hosts (with 4 SSD disks) i
noticed the difference in multipath configuration for the local disks.
suddenly the two OS disks (for RAID 1) are not configured as multipath
disks anymore, the unused other two are multipath disks. in the first
two host generations the (only) two OS disks (for RAID 1) are configured
as multipath disks.
after looking at this for the first time and briefly looking into
multipath documentation i think that local disks shouldn't be included
in multipath configuration at all. i tried to remove the local disks
from multipathing (delete from wwids file, explicit blacklisting), to no
avail.
i'm pasting two listings from the 4 SSD disk situation:
# lsscsi --scsi_id -g
[0:0:0:0] disk ATA SAMSUNG MZ7LM480 204Q /dev/sda - /dev/sg0
[0:0:1:0] disk ATA SAMSUNG MZ7LM480 204Q /dev/sdb - /dev/sg1
[0:0:2:0] disk ATA SAMSUNG MZ7LM480 204Q /dev/sdc
SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102216 /dev/sg2
[0:0:3:0] disk ATA SAMSUNG MZ7LM480 204Q /dev/sdd
SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102214 /dev/sg3
# ls -l /dev/disk/by-id/*SAMSUNG*
lrwxrwxrwx. 1 root root 9 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102212 -> ../../sdb
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102212-part1 ->
../../sdb1
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102212-part2 ->
../../sdb2
lrwxrwxrwx. 1 root root 9 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102214 -> ../../sdd
lrwxrwxrwx. 1 root root 9 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102216 -> ../../sdc
lrwxrwxrwx. 1 root root 9 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102222 -> ../../sda
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102222-part1 ->
../../sda1
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/ata-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102222-part2 ->
../../sda2
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/dm-name-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102214 ->
../../dm-6
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/dm-name-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102216 ->
../../dm-5
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/dm-uuid-mpath-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102214
-> ../../dm-6
lrwxrwxrwx. 1 root root 10 9. Okt 12:07
/dev/disk/by-id/dm-uuid-mpath-SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102216
-> ../../dm-5
can someone explain this behaviour? what is the _intended_ configuration?
thx
matthias
6 years, 6 months
problem installing/upgrading hosts after 3.6 to 4.0 update
by Jorick Astrego
This is a multi-part message in MIME format.
--------------70C79498EE5B5DF90AEE38A5
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Hi=2C
It was time to upgrade our ancient ovirt 3=2E6 to 4=2E0 =28and then to 4=2E=
1=29=2C=20
but I=27m having some issues in our test environment=2E
After upgrading the engine=2C I try to reinstall a fresh provisioned=20
Centos 7=2E4 node but it fails on the vdsm service=2E
When debugging I see in the log that the step =22vdsm-tool configure=22 fai=
ls=3A
2017-10-10 10=3A59=3A21 DEBUG otopi=2Econtext context=2E=5FexecuteMetho=
d=3A128
Stage closeup METHOD
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages=2EPlugin=2E=
=5Freconfigure
2017-10-10 10=3A59=3A21 DEBUG
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages plugin=2Eexec=
uteRaw=3A813
execute=3A =28=27/bin/vdsm-tool=27=2C =27configure=27=2C =27--force=27=
=29=2C
executable=3D=27None=27=2C cwd=3D=27None=27=2C env=3DNone
2017-10-10 10=3A59=3A21 DEBUG
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages plugin=2Eexec=
uteRaw=3A863
execute-result=3A =28=27/bin/vdsm-tool=27=2C =27configure=27=2C =27--fo=
rce=27=29=2C rc=3D1
2017-10-10 10=3A59=3A21 DEBUG
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages plugin=2Eexec=
ute=3A921
execute-output=3A =28=27/bin/vdsm-tool=27=2C =27configure=27=2C =27--fo=
rce=27=29 stdout=3A
Usage=3A /bin/vdsm-tool =5Boptions=5D =3Caction=3E =5Barguments=5D
Valid options=3A
-h=2C --help
Show this help menu=2E
-l=2C --logfile =3Cpath=3E
Redirect logging to file=2E
-v=2C --verbose
When I run it by hand=2C there is no action =22configure=22
vdsm-tool -vvv configure
Usage=3A /usr/bin/vdsm-tool =5Boptions=5D =3Caction=3E =5Barguments=5D=
Valid options=3A
-h=2C --help
Show this help menu=2E
-l=2C --logfile =3Cpath=3E
Redirect logging to file=2E
-v=2C --verbose
Include warning =28and errors=29 messages in log=2E
-vv=2C --vverbose
Include information =28and above=29 messages in log=2E
-vvv=2C --vvverbose
Include debug =28and above=29 messages in log=2E
-a=2C --append
There is also no =22vdsm-tool validate-config=22 command
rpm -qa=7Cgrep vdsm
vdsm-jsonrpc-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
vdsm-cli-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
vdsm-4=2E18=2E21-1=2Eel7=2Ecentos=2Ex86=5F64
vdsm-api-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
vdsm-infra-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
vdsm-python-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
vdsm-hook-vmfex-dev-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
vdsm-xmlrpc-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
vdsm-yajsonrpc-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch
What could be the problem=3F
Met vriendelijke groet=2C With kind regards=2C
Jorick Astrego
Netbulae Virtualization Experts=20
----------------
=09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK=
08198180
=09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW=
NL821234584B01
----------------
--------------70C79498EE5B5DF90AEE38A5
Content-Type: text/html;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
=3Chtml=3E
=3Chead=3E
=3Cmeta http-equiv=3D=22content-type=22 content=3D=22text/html=3B chars=
et=3Dutf-8=22=3E
=3C/head=3E
=3Cbody text=3D=22=23000000=22 bgcolor=3D=22=23FFFFFF=22=3E
=3Cp=3EHi=2C=3C/p=3E
=3Cp=3EIt was time to upgrade our ancient ovirt 3=2E6 to 4=2E0 =28and t=
hen to
4=2E1=29=2C but I=27m having some issues in our test environment=2E=
=3C/p=3E
=3Cp=3EAfter upgrading the engine=2C I try to reinstall a fresh
provisioned Centos 7=2E4 node but it fails on the vdsm service=2E=3C/=
p=3E
=3Cp=3EWhen debugging I see in the log that the step =22vdsm-tool
configure=22 fails=3A=3C/p=3E
=3Cblockquote=3E
=3Cp=3E2017-10-10 10=3A59=3A21 DEBUG otopi=2Econtext
context=2E=5FexecuteMethod=3A128 Stage closeup METHOD
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages=2EPlugin=
=2E=5Freconfigure=3Cbr=3E
2017-10-10 10=3A59=3A21 DEBUG
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages
plugin=2EexecuteRaw=3A813 execute=3A =28=27/bin/vdsm-tool=27=2C=20=
=27configure=27=2C
=27--force=27=29=2C executable=3D=27None=27=2C cwd=3D=27None=27=2C=
env=3DNone=3Cbr=3E
2017-10-10 10=3A59=3A21 DEBUG
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages
plugin=2EexecuteRaw=3A863 execute-result=3A =28=27/bin/vdsm-tool=27=
=2C
=27configure=27=2C =27--force=27=29=2C rc=3D1=3Cbr=3E
2017-10-10 10=3A59=3A21 DEBUG
otopi=2Eplugins=2Eovirt=5Fhost=5Fdeploy=2Evdsm=2Epackages plugin=2E=
execute=3A921
execute-output=3A =28=27/bin/vdsm-tool=27=2C =27configure=27=2C=20=
=27--force=27=29
stdout=3A=3Cbr=3E
Usage=3A /bin/vdsm-tool =5Boptions=5D =26lt=3Baction=26gt=3B =5Barg=
uments=5D=3Cbr=3E
Valid options=3A=3Cbr=3E
=C2=A0 -h=2C --help=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 Show this help menu=2E=3Cbr=3E
=C2=A0 -l=2C --logfile =26lt=3Bpath=26gt=3B=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 Redirect logging to file=2E=3Cbr=3E
=C2=A0 -v=2C --verbose=3Cbr=3E
=3Cbr=3E
=3C/p=3E
=3C/blockquote=3E
=3Cp=3EWhen I run it by hand=2C there is no action =22configure=22=3C/p=
=3E
=3Cblockquote=3E
=3Cp=3Evdsm-tool -vvv configure=3Cbr=3E
Usage=3A /usr/bin/vdsm-tool =5Boptions=5D =26lt=3Baction=26gt=3B=20=
=5Barguments=5D=3Cbr=3E
Valid options=3A=3Cbr=3E
=C2=A0 -h=2C --help=3Cbr=3E
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 Show this help menu=2E=3Cbr=
=3E
=C2=A0 -l=2C --logfile =26lt=3Bpath=26gt=3B=3Cbr=3E
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 Redirect logging to file=2E=
=3Cbr=3E
=C2=A0 -v=2C --verbose=3Cbr=3E
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 Include warning =28and errors=
=29 messages in log=2E=3Cbr=3E
=C2=A0 -vv=2C --vverbose=3Cbr=3E
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 Include information =28and ab=
ove=29 messages in log=2E=3Cbr=3E
=C2=A0 -vvv=2C --vvverbose=3Cbr=3E
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 Include debug =28and above=29=
messages in log=2E=3Cbr=3E
=C2=A0 -a=2C --append=3Cbr=3E
=3Cbr=3E
=3C/p=3E
=3C/blockquote=3E
=3Cp=3EThere is also no =22vdsm-tool validate-config=22 command=3Cbr=3E=
=3C/p=3E
=3Cp=3E=3Cbr=3E
=3C/p=3E
=3Cblockquote=3E
=3Cp=3Erpm -qa=7Cgrep vdsm=3C/p=3E
=3Cp=3Evdsm-jsonrpc-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3Cbr=3E
vdsm-cli-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3Cbr=3E
vdsm-4=2E18=2E21-1=2Eel7=2Ecentos=2Ex86=5F64=3Cbr=3E
vdsm-api-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3Cbr=3E
vdsm-infra-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3Cbr=3E
vdsm-python-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3C/p=3E
=3Cp=3Evdsm-hook-vmfex-dev-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3C/p=
=3E
=3Cp=3Evdsm-xmlrpc-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3C/p=3E
=3Cp=3Evdsm-yajsonrpc-4=2E18=2E21-1=2Eel7=2Ecentos=2Enoarch=3Cbr=3E=
=3C/p=3E
=3C/blockquote=3E
=3Cp=3EWhat could be the problem=3F=3Cbr=3E
=3C/p=3E
=20=
=3CBR /=3E
=3CBR /=3E
=3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cbr=3E=3Cspan styl=
e=3D=22color=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan sty=
le=3D=22mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelij=
ke groet=2C With kind regards=2C=3Cbr=3E=3Cbr=3EJorick Astrego=3Cbr=3E=3C/s=
pan=3E=3C/font=3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=
Netbulae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3An=
one=3Bborder-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 52=
2px=22=3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A=
10px=22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130p=
x=3Bfont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=
=22width=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =20=
=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=
=3E=3C/tr=3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=
=22=3EFax=3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfo=
nt-size=3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=
=3A 130px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=
=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=
=3C/tr=3E=3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bb=
order-top=3A1px solid =23ccc=3B=22=3E=3CBR /=3E
=3C/body=3E
=3C/html=3E
--------------70C79498EE5B5DF90AEE38A5--
6 years, 6 months
