May 2017 - Users - oVirt List Archives

HostedEngine with HA
by Carlos Rodrigues 22 Mar '18

22 Mar '18

Hello, I have one cluster with two hosts with power management correctly configured and one virtual machine with HostedEngine over shared storage with FiberChannel. When i shutdown the network of host with HostedEngine VM, it should be possible the HostedEngine VM migrate automatically to another host? What is the expected behaviour on this HA scenario? Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110

4 30

Official Hyperconverged Gluster oVirt upgrade procedure?
by Hanson 23 Jan '18

23 Jan '18

Hi Guys, Just wondering if we have an updated manual or whats the current procedure for upgrading the nodes in a hyperconverged ovirt gluster pool? Ie Nodes run 4.0 oVirt, as well as GlusterFS, and hosted-engine running in a gluster storage domain. Put node in maintenance mode and disable glusterfs from ovirt gui, run yum update? Thanks!

4 4

[vdsm] status update: running containers alongside VMs
by Francesco Romani 05 Jan '18

05 Jan '18

Hi everyone, I'm happy to share some progress about the former "convirt"[1] project, which aims to let Vdsm containers alongside VMs, on bare metal. In the last couple of months I kept updating the patch series, which is approaching the readiness to be merged in Vdsm. Please read through this mail to see what the patchset can do now, how you could try it *now*, even before it is merged. Everyone is invited to share thoughts and ideas about how this effort could evolve. This will be a long mail; I will amend, enhance and polish the content and make a blog post (on https://mojaves.github.io) to make it easier to consume and to have some easy-to-find documentation. Later on the same content will appear also on the oVirt blog. Happy hacking! +++ # How to try how the experimental container support for Vdsm. Vdsm is gaining *experimental* support to run containers alongside VMs. Vdsm had since long time the ability to manage VMs which run containers, and recently gained support for [atomic guests](http://www.projectatomic.io/blog/2015/01/running-ovirt-guest-agent-as-privileged-container/). With the new support we are describing, you will be able to manage containers with the same, proven infrastructure that let you manage VMs. This feature is currently being developed and it is still not merged in the Vdsm codebase, so some extra work is needed if you want to try it out. We aiming to merge it in the oVirt 4.1.z cycle. ## What works, aka what to expect The basic features are expected to work: 1. Run any docker image on the public docker registry 2. Make the container accessible from the outside (aka not just from localhost) 3. Use file-based storage for persistent volumes ## What does not yet work, aka what NOT to expect Few things are planned and currently under active development: 1. Monitoring. Engine will not get any update from the container besides "VM" status (Up, Down...) One important drawback is that you will not be told the IP of the container from Engine, you will need to connect to the Vdsm host to discover it using standard docker tools. 2. Proper network integration. Some steps still need manual intervention 3. Stability and recovery - it's pre-alpha software after all! :) ## 1. Introduction and prerequisites Trying out container support affects only the host and the Vdsm. Besides add few custom properties (totally safe and supported since early 3.z), there are zero changes required to the DB and to Engine. Nevertheless, we recommend to dedicate one oVirt 4.y environment, or at least one 4.y host, to try out the container feature. To get started, first thing you need is to setup a vanilla oVirt 4.y installation. We will need to make changes to the Vdsm and to the Vdsm host, so hosted engine and/or oVirt node may add extra complexity, better to avoid them at the moment. The reminder of this tutorial assumes you are using two hosts, one for Vdsm (will be changed) and one for Engine (will require zero changes); furthermore, we assume the Vdsm host is running on CentOS 7.y. We require: - one test host for Vdsm. This host need to have one NIC dedicated to containers. We will use the [docker macvlan driver](https://raesene.github.io/blog/2016/07/23/Docker-MacVLAN/), so this NIC *must not be* part of one bridge. - docker >= 1.12 - oVirt >= 4.0.5 (Vdsm >= 4.18.15) - CentOS >= 7.2 Docker >= 1.12 is avaialable for download [here](https://docs.docker.com/engine/installation/linux/centos/) Caveats: 1. docker from official rpms conflicts con docker from CentOS, and has a different package name: docker-engine vs docker. Please note that the kubernetes package from CentOS, for example, require 'docker', not 'docker-engine'. 2. you may want to replace the default service file [with this one](https://github.com/mojaves/convirt/blob/master/patches/centos72/system… and to use this [sysconfig file](https://github.com/mojaves/convirt/blob/master/patches/centos72/syste…. Here I'm just adding the storage options docker requires, much like the CentOS docker is configured. Configuring docker like this can save you some troubleshooting, especially if you had docker from CentOS installed on the testing box. ## 2. Patch Vdsm to support containers You need to patch and rebuild Vdsm. Fetch [this patch](https://github.com/mojaves/convirt/blob/master/patches/vdsm/4.18.15.… and apply it against Vdsm 4.18.15.1. Vdsm 4.18.15.{1,2,...} are supported as well. Rebuild Vdsm and reinstall on your box. [centos 7.2 packages are here](https://github.com/mojaves/convirt/tree/master/rpms/centos72) Make sure you install the Vdsm command line client (vdsm-cli) Restart *both* Vdsm and Supervdsm, make sure Engine still works flawlessly with patched Vdsm. This ensure that no regression is introduced, and that your environment can run VMs just as before. Now we can proceed adding the container support. start docker: # systemctl start docker-engine (optional) # systemctl enable docker-engine Restart Vdsm again # systemctl restart vdsm Now we can check if Vdsm detects docker, so you can use it: still on the same Vdsm host, run $ vdsClient -s 0 getVdsCaps | grep containers containers = ['docker', 'fake'] This means this Vdsm can run containers using 'docker' and 'fake' runtimes. Ignore the 'fake' runtime; as the name suggests, is a test driver, kinda like /dev/null. Now we need to make sure the host network configuration is fine. ### 2.1. Configure the docker network for Vdsm PLEASE NOTE that the suggested network configuration assumes that * you have one network, `ovirtmgmt` (the default one) you use for everything * you have one Vdsm host with at least two NICs, one bound to the `ovirtmgmt` network, and one spare _This step is not yet automated by Vdsm_, so manual action is needed; Vdsm will take care of this automatically in the future. You can use [this helper script](https://github.com/mojaves/convirt/blob/master/patches/vdsm/cont-se…, which reuses the Vdsm libraries. Make sure you have patched Vdsm to support container before to use it. Let's review what the script needs: # ./cont-setup-net -h usage: cont-setup-net [-h] [--name [NAME]] [--bridge [BRIDGE]] [--interface [INTERFACE]] [--gateway [GATEWAY]] [--subnet [SUBNET]] [--mask [MASK]] optional arguments: -h, --help show this help message and exit --name [NAME] network name to use --bridge [BRIDGE] bridge to use --interface [INTERFACE] interface to use --gateway [GATEWAY] address of the gateway --subnet [SUBNET] subnet to use --mask [MASK] netmask to use So we need to feed --name, --interface, --gateway, --subnet and optionally --mask (default, /24, is often fine). For my case the default mask was indeed fine, so I used the script like this: # ./cont-setup-net --name ovirtmgmt --interface enp3s0 --gateway 192.168.1.1 --subnet 192.168.1.0 Thhis is the output I got: DEBUG:virt.containers.runtime:configuring runtime 'docker' DEBUG:virt.containers.command:* calling ['/bin/docker', 'network', 'inspect', 'ovirtmgmt'] Error: No such network: ovirtmgmt DEBUG:virt.containers.command:* called ['/bin/docker', 'network', 'inspect', 'ovirtmgmt'] DEBUG:virt.containers.runtime.Docker:config: cannot load 'ovirtmgmt', ignored DEBUG:virt.containers.command:* calling ['/bin/docker', 'network', 'create', '-d', 'macvlan', '--subnet=192.168.1.0/24', '--gateway=192.168.1.1', '--ip-range=192.168.1.0/24', '-o', 'parent=enp3s0', 'ovirtmgmt'] DEBUG:virt.containers.command:* called ['/bin/docker', 'network', 'create', '-d', 'macvlan', '--subnet=192.168.1.0/24', '--gateway=192.168.1.1', '--ip-range=192.168.1.0/24', '-o', 'parent=enp3s0', 'ovirtmgmt'] DEBUG:virt.containers.runtime:configuring runtime 'fake' You can clearly see what the script did, and why it needed the root privileges. Let's deoublecheck using the docker tools: # docker network ls NETWORK ID NAME DRIVER SCOPE 91535f3425a8 bridge bridge local d42f7e5561b5 host host local 621ab6dd49b1 none null local f4b88e4a67eb ovirtmgmt macvlan local # docker network inspect ovirtmgmt [ { "Name": "ovirtmgmt", "Id": "f4b88e4a67ebb7886ec74073333d613b1893272530cae4d407c95ab587c5fea1", "Scope": "local", "Driver": "macvlan", "EnableIPv6": false, "IPAM": { "Driver": "default", "Options": {}, "Config": [ { "Subnet": "192.168.1.0/24", "IPRange": "192.168.1.0/24", "Gateway": "192.168.1.1" } ] }, "Internal": false, "Containers": {}, "Options": { "parent": "enp3s0" }, "Labels": {} } ] Looks good! the host configuration is completed. Let's move to the Engine side. ## 3. Configure Engine As mentioned above, we need now to configure Engine. This boils down to: Add a few custom properties for VMs: In case you were already using custom properties, you need to amend the command line to not overwrite your existing ones. # engine-config -s UserDefinedVMProperties='volumeMap=^[a-zA-Z_-]+:[a-zA-Z_-]+$;containerImage=^[a-zA-Z]+(://|)[a-zA-Z]+$;containerType=^(docker|rkt)$' --cver=4.0 It is worth stressing that while the variables are container-specific, the VM custom properties are totally inuntrusive and old concept in oVirt, so this step is totally safe. Now restart Engine to let it use the new variables: # systemctl restart ovirt-engine The next step is actually configure one "container VM" and run it. ## 4. Create the container "VM" To finally run a container, you start creating a VM much like you always did, with few changes 1. most of the hardware-related configuration isn't relevant for container "VMs", besides cpu share and memory limits; this will be better documented in the future; unneeded configuration will just be ignored 2. You need to set some custom properties for your container "VM". Those are actually needed to enable the container flow, and they are documented in the next section. You *need* to set at least `containerType` and `containerImage`. ### 4.2. Custom variables for container support The container support needs some custom properties to be properly configured: 1. `containerImage` (*needed* to enable the container system). Just select the target image you want to run. You can use the standard syntax of the container runtimes. 2. `containerType` (*needed* to enable the container system). Selects the container runtime you want to use. All the available options are always showed. Please note that unavailable container options are not yet grayed out. If you *do not* have rkt support on your host, you still can select it, but it won't work. 3. `volumeMap` key:value like. You can map one "VM" disk (key) to one container volume (value), to have persistent storage. Only file-based storage is supported. Example configuration: `containerImage = redis` `containerType = docker` `volumeMap = vda:data` (this may not be needed, and the volume label is just for illustrative purposes) ### 4.2. A little bit of extra work: preload the images on the Vdsm host This step is not needed by the flow, and will be handled by oVirt in the future. The issue is how the container image are handled. They are stored by the container management system (rkt, docker) on each host, and they are not pre-downloaded. To shorten the duration of the first boot, you are advised to pre-download the image(s) you want to run. For example ## on the Vdsm host you want to use with containers # docker pull redis ## 5. Run the container "VM" You are now all set to run your "VM" using oVirt Engine, just like any existing VM. Some actions doesn't make sense for a container "VM", like live migration. Engine won't stop you to try to do those actions, but they will fail gracefully using the standard errors. ## 6. Next steps What to expect from this project in the future? For the integration with Vdsm, we want to fix the existing known issues, most notably: * add proper monitoring/reporting of the container health * ensure proper integration of the container image store with oVirt storage management * streamline the network configuration What is explicitely excluded yet is any Engine change. This is a Vdsm-only change at the moment, so fixing the following is currently unplanned: * First and foremost, Engine will not distinguish between real VMs and container VMs. Actions unavailable to container will not be hidden from UI. Same for monitoring and configuration data, which will be ignored. * Engine is NOT aware of the volumes one container can use. You must inspect and do the mapping manually. * Engine is NOT aware of the available container runtimes. You must select it carefully Proper integration with Engine may be added in the future once this feature exits from the experimental/provisional stage. Thanks for reading, make sure to share your thoughts on the oVirt mailing lists! +++ [1] we keep calling it that way _only_ internally, because it's a short name we are used to. After the merge/once we release it, we will use a different name, like "vdsm-containers" or something like it. -- Francesco Romani Red Hat Engineering Virtualization R & D Phone: 8261328 IRC: fromani

3 2

Re: [ovirt-users] iSCSI domain on 4kn drives
by Martijn Grendelman 13 Nov '17

13 Nov '17

--------------DE48748F7C67E1FABE46EEAF Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Op 7-8-2016 om 8:19 schreef Yaniv Kaul: > > On Fri, Aug 5, 2016 at 4:42 PM, Martijn Grendelman > <martijn.grendelman(a)isaac.nl <mailto:martijn.grendelman@isaac.nl>> wrote: > > Op 4-8-2016 om 18:36 schreef Yaniv Kaul: >> On Thu, Aug 4, 2016 at 11:49 AM, Martijn Grendelman >> <martijn.grendelman(a)isaac.nl >> <mailto:martijn.grendelman@isaac.nl>> wrote: >> >> Hi, >> >> Does oVirt support iSCSI storage domains on target LUNs using >> a block >> size of 4k? >> >> >> No, we do not - not if it exposes 4K blocks. >> Y. > > Is this on the roadmap? > > > Not in the short term roadmap. > Of course, patches are welcome. It's mainly in VDSM. > I wonder if it'll work in NFS. > Y. I don't think I ever replied to this, but I can confirm that in RHEV 3.6 it works with NFS. Best regards, Martijn. --------------DE48748F7C67E1FABE46EEAF Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: 7bit <html> <head> <meta content="text/html; charset=utf-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> Op 7-8-2016 om 8:19 schreef Yaniv Kaul:<br> <blockquote cite="mid:280cfbd3a16ad1b76cc7de56bda88f45,CAJgorsbJHLV1e3fH4b4AR3GBp1oi44fDhfeii+PQ1iY1RwUStw@mail.gmail.com" type="cite"> <div dir="ltr"><br> <div class="gmail_extra">On Fri, Aug 5, 2016 at 4:42 PM, Martijn Grendelman <span dir="ltr"><<a moz-do-not-send="true" href="mailto:martijn.grendelman@isaac.nl" target="_blank">martijn.grendelman(a)isaac.nl</a>></span> wrote:<br> <div class="gmail_quote"> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div bgcolor="#FFFFFF" text="#000000"> Op 4-8-2016 om 18:36 schreef Yaniv Kaul:<br> <blockquote type="cite"> <div dir="ltr"> <div class="gmail_extra"> <div class="gmail_quote"><span class="">On Thu, Aug 4, 2016 at 11:49 AM, Martijn Grendelman <span dir="ltr"><<a moz-do-not-send="true" href="mailto:martijn.grendelman@isaac.nl" target="_blank">martijn.grendelman(a)isaac.nl</a>></span> wrote:<br> </span><span class=""> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br> <br> Does oVirt support iSCSI storage domains on target LUNs using a block<br> size of 4k?<br> </blockquote> <div><br> </div> </span><span class=""> <div>No, we do not - not if it exposes 4K blocks.</div> <div>Y.</div> </span></div> </div> </div> </blockquote> <br> Is this on the roadmap?<br> </div> </blockquote> <div><br> </div> <div>Not in the short term roadmap.</div> <div>Of course, patches are welcome. It's mainly in VDSM.</div> <div>I wonder if it'll work in NFS.</div> <div>Y.</div> </div> </div> </div> </blockquote> <br> I don't think I ever replied to this, but I can confirm that in RHEV 3.6 it works with NFS.<br> <br> Best regards,<br> Martijn.<br> </body> </html> --------------DE48748F7C67E1FABE46EEAF--

4 4

Re: [ovirt-users] How to import a qcow2 disk into ovirt
by Martín Follonier 04 Oct '17

04 Oct '17

Hi, I've done all the recommendations in this thread, and I'm still getting the "Paused by System" message just after the transfer starts. Honestly I don't know were else to look at, cause I don't find any log entry or packet capture that give me a hint about what is happening. I'll appreciate any help! Thank you in advance! Regards Martin On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com> wrote: > You can do both, > Through the database, the table is "vdc_options". change "option_value" > where "option_name" = 'ImageProxyAddress' . > > On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <gianluca.cec...(a)gmail.com > > wrote: > >> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com> wrote: >> >>> You can just replace this value in the DB and change it to the right >>> FQDN, it is a config value named "ImageProxyAddress". replace "localhost" >>> with the right address (notice that the port is there too). >>> >>> If this will keep happen after users will have the latest version, we >>> will have to open a bug and fix whatever causes the URL to be "localhost". >>> >>> >> Do you mean through "engine-config" or directly into database? >> In this second case which is the table involved? >> >> Gianluca >> > > [root@ractorshe bin]# systemctl stop ovirt-imageio-proxy engine=# select * from vdc_options where option_name='ImageProxyAddress'; option_id | option_name | option_value | version -----------+-------------------+-----------------+--------- 950 | ImageProxyAddress | localhost:54323 | general (1 row) engine=# update vdc_options set option_value='ractorshe.mydomain:54323' where option_name='ImageProxyAddress'; UPDATE 1 engine=# select * from vdc_options where option_name='ImageProxyAddress'; option_id | option_name | option_value | version -----------+-------------------+--------------------------------------+--------- 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general (1 row) engine=# engine=# select * from vdc_options where option_name='ImageProxyAddress'; option_id | option_name | option_value | version -----------+-------------------+--------------------------------------+--------- 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general (1 row) systemctl stop ovirt-engine (otherwise it remained localhost) systemctl start ovirt-engine systemctl start ovirt-imageio-proxy Now transfer is ok. I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data. I'm going to connect it to a VM and see if all is ok also from a contents point of view. Gianluca _______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users

5 6

ovirt-hosted-engine state transition messages
by Jim Kusznir 23 Jul '17

23 Jul '17

Hello: I find that I often get random-seeming messages. A lot of them mention "ReintializeFSM", but I also get engine down, engine start, etc. messages. All the time, nothing appears to be happening on the cluster, and I rarely can find anything wrong or any trigger/cause. Is this normal? What causes this (beyond obvious hardware issues / hosts rebooting)? Most of the time when I get these, my cluster is going along smoothly, and nothing (not even administrative access) is interrupted. Could ISP issues cause these messages to be generated? Thanks! --Jim

5 7

SQL : last time halted?
by Nicolas Ecarnot 09 Jul '17

09 Jul '17

Hello, I'm trying to find a way to clean up the VMs list of my DCs. I think some of my users have created VM they're not using anymore, but it's difficult to sort them out. In some cases, I can shutdown some of them and wait. Is there somewhere stored in the db tables the date of the last VM exctinction? Thank you. -- Nicolas ECARNOT

3 4

Cloning VM on NFS Leads to Locked Disks
by Charles Tassell 06 Jul '17

06 Jul '17

Hi Everyone, I'm having some issues with my oVirt 4.1 (fully updated to latest release as of yesterday) cluster. When I clone a VM the disks of both the original and the clone stay in the locked state, and the only way I can resolve it is to go into the database on the engine and run "update images set imagestatus=1 where imagestatus=2;" I'm using NFS4 as a datastore and the disks seem to copy fine (file sizes match and everything), but the locking worries me. To clone the VM I just shut the source VM down and then right click on it and select "Clone" I've attached the full VDSM log from my last attempt, but here is the excerpt of the lines just referencing the two disks (d73206ed-89ba-48a9-82ff-c107c1af60f0 is the original VMs disk and 670a7b20-fecd-45c6-af5c-3c7b98258224 is the clone.) 2017-05-10 11:36:20,120-0300 INFO (jsonrpc/2) [dispatcher] Run and protect: copyImage(sdUUID=u'20423d5e-188c-4e10-9893-588ceb81b354', spUUID=u'00000001-0001-0001-0001-000000000311', vmUUID='', srcImgUUID=u'd73206ed-89ba-48a9-82ff-c107c1af60f0', srcVolUUID=u'bba1813d-9e91-4e37-bed7-40beedda8051', dstImgUUID=u'670a7b20-fecd-45c6-af5c-3c7b98258224', dstVolUUID=u'013d8855-4e49-4984-8266-6a5e9437dff7', description=u'', dstSdUUID=u'20423d5e-188c-4e10-9893-588ceb81b354', volType=8, volFormat=5, preallocate=2, postZero=u'false', force=u'false', discard=False) (logUtils:51) 2017-05-10 11:36:20,152-0300 INFO (jsonrpc/2) [storage.Image] image d73206ed-89ba-48a9-82ff-c107c1af60f0 in domain 20423d5e-188c-4e10-9893-588ceb81b354 has vollist [u'bba1813d-9e91-4e37-bed7-40beedda8051'] (image:319) 2017-05-10 11:36:20,169-0300 INFO (jsonrpc/2) [storage.Image] sdUUID=20423d5e-188c-4e10-9893-588ceb81b354 imgUUID=d73206ed-89ba-48a9-82ff-c107c1af60f0 chain=[<storage.fileVolume.FileVolume object at 0x278e450>] (image:249) 2017-05-10 11:36:20,292-0300 INFO (tasks/0) [storage.Image] sdUUID=20423d5e-188c-4e10-9893-588ceb81b354 imgUUID=d73206ed-89ba-48a9-82ff-c107c1af60f0 chain=[<storage.fileVolume.FileVolume object at 0x302c6d0>] (image:249) 2017-05-10 11:36:20,295-0300 INFO (tasks/0) [storage.Image] sdUUID=20423d5e-188c-4e10-9893-588ceb81b354 vmUUID= srcImgUUID=d73206ed-89ba-48a9-82ff-c107c1af60f0 srcVolUUID=bba1813d-9e91-4e37-bed7-40beedda8051 dstImgUUID=670a7b20-fecd-45c6-af5c-3c7b98258224 dstVolUUID=013d8855-4e49-4984-8266-6a5e9437dff7 dstSdUUID=20423d5e-188c-4e10-9893-588ceb81b354 volType=8 volFormat=RAW preallocate=SPARSE force=False postZero=False discard=False (image:765) 2017-05-10 11:36:20,305-0300 INFO (tasks/0) [storage.Image] copy source 20423d5e-188c-4e10-9893-588ceb81b354:d73206ed-89ba-48a9-82ff-c107c1af60f0:bba1813d-9e91-4e37-bed7-40beedda8051 vol size 41943040 destination 20423d5e-188c-4e10-9893-588ceb81b354:670a7b20-fecd-45c6-af5c-3c7b98258224:013d8855-4e49-4984-8266-6a5e9437dff7 apparentsize 41943040 (image:815) 2017-05-10 11:36:20,306-0300 INFO (tasks/0) [storage.Image] image 670a7b20-fecd-45c6-af5c-3c7b98258224 in domain 20423d5e-188c-4e10-9893-588ceb81b354 has vollist [] (image:319) 2017-05-10 11:36:20,306-0300 INFO (tasks/0) [storage.Image] Create placeholder /rhev/data-center/00000001-0001-0001-0001-000000000311/20423d5e-188c-4e10-9893-588ceb81b354/images/670a7b20-fecd-45c6-af5c-3c7b98258224 for image's volumes (image:149) 2017-05-10 11:36:20,392-0300 INFO (tasks/0) [storage.Volume] Request to create RAW volume /rhev/data-center/00000001-0001-0001-0001-000000000311/20423d5e-188c-4e10-9893-588ceb81b354/images/670a7b20-fecd-45c6-af5c-3c7b98258224/013d8855-4e49-4984-8266-6a5e9437dff7 with size = 20480 sectors (fileVolume:439) 2017-05-10 11:37:58,453-0300 INFO (tasks/0) [storage.VolumeManifest] sdUUID=20423d5e-188c-4e10-9893-588ceb81b354 imgUUID=670a7b20-fecd-45c6-af5c-3c7b98258224 volUUID = 013d8855-4e49-4984-8266-6a5e9437dff7 legality = LEGAL (volume:393)

2 7

iSCSI storage domain and multipath when adding node
by Gianluca Cecchi 27 Jun '17

27 Jun '17

Hello, my configuration is what described here: http://lists.ovirt.org/pipermail/users/2017-March/080992.html So I'm using iSCSI multipath and not bonding can anyone reproduce? Initial situation is only one node configured and active with some VMS I go and configure a second node; it tries to activate but networks are not all already mapped and so gies to non operational. I setup all networks and activate the node It happens that: - on the first node where I currently have 2 iSCSI connections and 2multipath lines (with p1p1.100 and p1p2) it is instantiated a new iSCSI SID using interface "default" and in multipath -l output I see now 3 lines - on the newly added node I only see 1 iSCSI SID using interface default My way to solve the situation was to go inside iscsi multipath section do nothing but save the same config brutally on first node iscsiadm -m session -u --> all iscsi sessions are closed after a while I see again the original 2 connections recovered, with correct interface names used - on second node iscsiadm -m session -u --> the only session is cloed nothing happens if I set to maintenance the node and then activate the node --> the 2 correct iscsi sessions are activated... Thanks Gianluca

2 5

Info on live snapshot and agent interaction
by Gianluca Cecchi 23 Jun '17

23 Jun '17

Hello, supposing to have a Linux VM with ovirt-guest-agent installed, during a live snapshot operation it should be freeze of filesystems. Where to find confirmation of correct/successful interaction? /var/log/messages or agent log or other kind of files? Are there any limitations on filesystems that support freeze? Is it fsfreeze the command executed at VM OS level or any other low level command? Thanks, Gianluca

3 2