leftover of disk moving operation
by Gianluca Cecchi
Hello,
I had a problem during a disk migration from one storage to another in a
4.1.7 environment connected to SAN storage.
Now, after deleting the live storage migration snapshot, I want to retry
(with the VM powered off) but at destination the logical volume still
exists and was not pruned after the initial failure.
I get
HSMGetAllTasksStatusesVDS failed: Cannot create Logical Volume:
('c0097b1a-a387-4ffa-a62b-f9e6972197ef',
u'a20bb16e-7c7c-4ed4-85c0-cbf297048a8e')
I was able to move the other 4 disks that were part of this VM.
Can I simply lvremove the target LV at host side (I have only one host
running at this moment) and try the move again, or do I have to execute
anything more, eg at engine rdbms level?
Thanks,
Gianluca
7 years, 2 months
Defining custom network filter or editing existing
by Tim Thompson
All,
I was wondering if someone can point me in the direction of the
documentation related to defining custom network filters (nwfilter) in
4.2. I found the docs on assigning a network filter to a vNIC profile,
but I cannot find any mention of how you can create your own. Normally
you'd use 'virst nwfilter-define', but that is locked out since vdsm
manages everything. I need to expand clean-traffic's scope to include
ipv6, since it doesn't handle ipv6 at all by default, it seems.
Thanks,
-Tim
7 years, 2 months
VM is down with error: Bad volume specification
by Chris Boot
Hi all,
I'm running oVirt 4.2.0 and have been using oVirtBackup with it. So far
it has been working fine, until this morning. Once of my VMs seems to
have had a snapshot created that I can't delete.
I noticed when the VM failed to migrate to my other hosts, so I just
shut it down to allow the host to go into maintenance. Now I can't start
the VM with the snapshot nor can I delete the snapshot.
Please let me know what further information you need to help me diagnose
the issue and recover the VM.
Best regards,
Chris
-------- Forwarded Message --------
Subject: alertMessage (ovirt.boo.tc), [VM morse is down with error. Exit
message: Bad volume specification {'address': {'bus': '0', 'controller':
'0', 'type': 'drive', 'target': '0', 'unit': '0'}, 'serial':
'ec083085-52c1-4da5-88cf-4af02e42a212', 'index': 0, 'iface': 'scsi',
'apparentsize': '12386304', 'cache': 'none', 'imageID':
'ec083085-52c1-4da5-88cf-4af02e42a212', 'truesize': '12386304', 'type':
'file', 'domainID': '23372fb9-51a5-409f-ae21-2521012a83fd', 'reqsize':
'0', 'format': 'cow', 'poolID': '00000001-0001-0001-0001-000000000311',
'device': 'disk', 'path':
'/rhev/data-center/00000001-0001-0001-0001-000000000311/23372fb9-51a5-409f-ae21-2521012a83fd/images/ec083085-52c1-4da5-88cf-4af02e42a212/aa10d05b-f2f0-483e-ab43-7c03a86cd6ab',
'propagateErrors': 'off', 'name': 'sda', 'bootOrder': '1', 'volumeID':
'aa10d05b-f2f0-483e-ab43-7c03a86cd6ab', 'diskType': 'file',
'specParams': {}, 'discard': True}.]
Date: Tue, 23 Jan 2018 11:32:21 +0000 (GMT)
From: engine(a)ovirt.boo.tc
To: bootc(a)bootc.net
Time:2018-01-23 11:30:39.677
Message:VM morse is down with error. Exit message: Bad volume
specification {'address': {'bus': '0', 'controller': '0', 'type':
'drive', 'target': '0', 'unit': '0'}, 'serial':
'ec083085-52c1-4da5-88cf-4af02e42a212', 'index': 0, 'iface': 'scsi',
'apparentsize': '12386304', 'cache': 'none', 'imageID':
'ec083085-52c1-4da5-88cf-4af02e42a212', 'truesize': '12386304', 'type':
'file', 'domainID': '23372fb9-51a5-409f-ae21-2521012a83fd', 'reqsize':
'0', 'format': 'cow', 'poolID': '00000001-0001-0001-0001-000000000311',
'device': 'disk', 'path':
'/rhev/data-center/00000001-0001-0001-0001-000000000311/23372fb9-51a5-409f-ae21-2521012a83fd/images/ec083085-52c1-4da5-88cf-4af02e42a212/aa10d05b-f2f0-483e-ab43-7c03a86cd6ab',
'propagateErrors': 'off', 'name': 'sda', 'bootOrder': '1', 'volumeID':
'aa10d05b-f2f0-483e-ab43-7c03a86cd6ab', 'diskType': 'file',
'specParams': {}, 'discard': True}.
Severity:ERROR
VM Name: morse
Host Name: ovirt2.boo.tc
Template Name: Blank
--
Chris Boot
bootc(a)boo.tc
7 years, 2 months
effectiveness of "discard=unmap"
by Matthias Leopold
Hi,
i'm sorry to bother you again with my ignorance of the DISCARD feature
for block devices in general.
after finding several ways to enable "discard=unmap" for oVirt disks
(via standard GUI option for iSCSI disks or via "diskunmap" custom
property for Cinder disks) i wanted to check in the guest for the
effectiveness of this feature. to my surprise i couldn't find a
difference between Linux guests with and without "discard=unmap" enabled
in the VM. "lsblk -D" reports the same in both cases and also
fstrim/blkdiscard commands appear to work with no difference. Why is
this? Do i have to look at the underlying storage to find out what
really happens? Shouldn't this be visible in the guest OS?
thx
matthias
7 years, 2 months
Info about windows guest performance
by Gianluca Cecchi
Hello,
while in my activities to accomplish migration of a Windows 2008 R2 VM
(with an Oracle RDBMS inside) from vSphere to oVirt, I'm going to check
performance related things.
Up to now I only ran Windows guests inside my laptops and not inside an
oVirt infrastructure.
Now I successfully migrated this kind of VM to oVirt 4.1.9.
The guest had an LSI logic sas controller. Inside the oVirt host that I
used as proxy (for VMware virt-v2v) I initially didn't have the virtio-win
rpm.
I presume that has been for this reason that the oVirt guest has been
configured with IDE disks...
Can you confirm?
For this test I started with ide, then added a virtio-scsi disk and then
changed also the boot disk to virtio-scsi and all now goes well, with also
ovirt-guest-tools-iso-4.1-3 provided iso used to install qxl and so on...
So far so good.
I found this bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1277353
where it seems that
"
For optimum I/O performance it's critical to make sure that Windows
guests use the Hyper-V reference counter feature. QEMU command line
should include
-cpu ...,hv_time
and
-no-hpet
"
Analyzing my command line I see the "-no-hpet" but I dont see the "hv_time"
See below full comand.
Any hints?
Thanks,
Gianluca
/usr/libexec/qemu-kvm
-name guest=testmig,debug-threads=on
-S
-object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-12-testmig/master-key.aes
-machine pc-i440fx-rhel7.3.0,accel=kvm,usb=off,dump-guest-core=off
-cpu Westmere,vmx=on
-m size=4194304k,slots=16,maxmem=16777216k
-realtime mlock=off
-smp 2,maxcpus=16,sockets=16,cores=1,threads=1
-numa node,nodeid=0,cpus=0-1,mem=4096
-uuid x-y-z-x-y
-smbios type=1,manufacturer=oVirt,product=oVirt
Node,version=7-4.1708.el7.centos,serial=xx,uuid=yy
-no-user-config
-nodefaults
-chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-12-testmig/monitor.sock,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control
-rtc base=2018-02-09T12:41:41,driftfix=slew
-global kvm-pit.lost_tick_policy=delay
-no-hpet
-no-shutdown
-boot strict=on
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x5
-device virtio-serial-pci,id=virtio-serial0,max_ports=16,bus=pci.0,addr=0x4
-drive if=none,id=drive-ide0-1-0,readonly=on
-device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0
-drive file=/rhev/data-center/ef17cad6-7724-4cd8-96e3-9af6e529db51/fa33df49-b09d-4f86-9719-ede649542c21/images/2de93ee3-7d6e-4a10-88c4-abc7a11fb687/a9f4e35b-4aa0-45e8-b775-1a046d1851aa,format=qcow2,if=none,id=drive-scsi0-0-0-1,serial=2de93ee3-7d6e-4a10-88c4-abc7a11fb687,cache=none,werror=stop,rerror=stop,aio=native
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=1,drive=drive-scsi0-0-0-1,id=scsi0-0-0-1,bootindex=1
-drive file=/rhev/data-center/ef17cad6-7724-4cd8-96e3-9af6e529db51/fa33df49-b09d-4f86-9719-ede649542c21/images/f821da0a-cec7-457c-88a4-f83f33404e65/0d0c4244-f184-4eaa-b5bf-8dc65c7069bb,format=raw,if=none,id=drive-scsi0-0-0-0,serial=f821da0a-cec7-457c-88a4-f83f33404e65,cache=none,werror=stop,rerror=stop,aio=native
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0
-netdev tap,fd=30,id=hostnet0
-device e1000,netdev=hostnet0,id=net0,mac=00:50:56:9d:c9:29,bus=pci.0,addr=0x3
-chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/421d6f1b-58e3-54a4-802f-fb52f7831369.com.redhat.rhevm.vdsm,server,nowait
-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rhevm.vdsm
-chardev socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/421d6f1b-58e3-54a4-802f-fb52f7831369.org.qemu.guest_agent.0,server,nowait
-device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.guest_agent.0
-chardev spicevmc,id=charchannel2,name=vdagent
-device virtserialport,bus=virtio-serial0.0,nr=3,chardev=charchannel2,id=channel2,name=com.redhat.spice.0
-spice tls-port=5900,addr=10.4.192.32,x509-dir=/etc/pki/vdsm/libvirt-spice,tls-channel=default,tls-channel=main,tls-channel=display,tls-channel=inputs,tls-channel=cursor,tls-channel=playback,tls-channel=record,tls-channel=smartcard,tls-channel=usbredir,seamless-migration=on
-device qxl-vga,id=video0,ram_size=67108864,vram_size=8388608,vram64_size_mb=0,vgamem_mb=16,max_outputs=1,bus=pci.0,addr=0x2
-msg timestamp=on
7 years, 2 months
Network configuration validation error
by spfma.tech＠e.mail.fr
--=_c8dd4bd4673b7a5ada782429f2b8b302
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Hi, I am experiencing a new problem : when I try to modify something in=
the network setup on the second node (added to the cluster after instal=
ling the engine on the other one) using the Engine GUI, I get the follow=
ing error when validating : must match "^\b((25[0-5]|2[0-4]\d|[01]\d\=
d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"=0A Attribut : ipConfigu=
ration.iPv4Addresses[0].gateway Moreover, on the general status of the=
r server, I have a "Host has no default route" alert. The ovirtmgmt ne=
twork has a defined gateway of course, and the storage network has none=
because it is not required. Both server have the same setup, with diffe=
rent addresses of course :-) I have not been able to find anything use=
ful in the logs. Is this a bug or am I doing something wrong ? Regar=
ds =0A=0A---------------------------------------------------------------=
----------------------------------=0AFreeMail powered by mail.fr
--=_c8dd4bd4673b7a5ada782429f2b8b302
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<div> </div>=0A<div>Hi,</div>=0A<div>I am experiencing a new proble=
m : when I try to modify something in the network setup on the second no=
de (added to the cluster after installing the engine on the other one) u=
sing the Engine GUI, I get the following error when validating :</div>=
=0A<div> </div>=0A<div> must match "^\b((25[0-5]|=
2[0-4]\d|[01]\d\d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"<br />&n=
bsp; Attribut : ipConfiguration.iPv4Addresses[0].gateway</di=
v>=0A<div> </div>=0A<div>Moreover, on the general status of ther se=
rver, I have a "Host has no default route" alert.</div>=0A<div> </d=
iv>=0A<div>The ovirtmgmt network has a defined gateway of course, and th=
e storage network has none because it is not required. Both server have=
the same setup, with different addresses of course :-)</div>=0A<div>&nb=
sp;</div>=0A<div>I have not been able to find anything useful in the log=
s.</div>=0A<div> </div>=0A<div>Is this a bug or am I doing somethin=
g wrong ?</div>=0A<div> </div>=0A<div>Regards</div>=0A =
<br/><hr>FreeMail powered by <a href=3D"https://mail.fr" target=
=3D"_blank">mail.fr</a>=0A
--=_c8dd4bd4673b7a5ada782429f2b8b302--
7 years, 2 months
Using network assigned to VM on CentOS host?
by Wesley Stewart
This might be a stupid question. But I am testing out a 10Gb network
directly connected to my Freenas box using a Cat6 crossover cable.
I setup the connection (on device eno4) and called the network "Crossover"
in oVirt.
I dont have DHCP on this, but I can easy assign VMs a NIC on the
"Crossover" network, assign them an ip address (10.10.10.x) and everything
works fine. But I was curious about doing this for the CentOS host as
well. I want to test out hosting VM's on the NFS share over the 10Gb
network but I wasn't quite sure how to do this without breaking other
connections and I did not want to do anything incorrectly.
I appreciate your feedback! I apologize if this is a stupid question.
Running oVirt 4.1.8 on CentOS 7.4
7 years, 2 months
Hosted-Engine mount .iso file CLI
by Russell Wecker
I have a hosted engine setup that when I ran the system updates for it, and
it will not boot. I would like to have it boot from a rescue CD image so i
can fix it i have copied the /var/run/ovirt-hosted-engine-ha/vm.conf to
/root and modified it however i cannot seem to find the exact options to
configure the file for .iso my current settings are
devices={index:2,iface:ide,shared:false,readonly:true,deviceId:8c3179ac-b322-4f5c-9449-c52e3665e0ae,address:{controller:0,target:0,unit:0,bus:1,type:drive},device:cdrom,path:,type:disk}
How do i change it to boot from local .iso.
Thanks
Any help would be most appreciated.
7 years, 2 months
Issue with 4.2.1 RC and SSL
by ~Stack~
This is an OpenPGP/MIME signed message (RFC 4880 and 3156)
--X1liMzBwOelVuDr9VnkmQpyzIXGjCLTVO
Content-Type: multipart/mixed; boundary="nhGTtLudrG119NimaBSBZPnEVXBJuW62Y";
protected-headers="v1"
From: ~Stack~ <i.am.stack(a)gmail.com>
To: users <users(a)ovirt.org>
Message-ID: <ff271e8b-7ec9-f0b6-6e00-511c5aad1b27(a)gmail.com>
Subject: Issue with 4.2.1 RC and SSL
--nhGTtLudrG119NimaBSBZPnEVXBJuW62Y
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: quoted-printable
Greetings,
I was having a lot of issues with 4.2 and 95% of them are in the change
logs for 4.2.1. Since this is a new build, I just blew everything away
and started from scratch with the RC release.
The very first thing that I did after the engine-config was to set up my
SSL cert. I followed the directions from here:
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL/
Logged in the first time to the web interface and everything worked! Grea=
t.
Install my hosts (also completely fresh installs - Scientific Linux 7
fully updated) and none would finish the install...
I can send the full host debug log if you want, however, I'm pretty sure
that the problem is because of the SSL somewhere. I've cut/pasted the
relevant part.
Any advice/help, please?
Thanks!
~Stack~
2018-02-07 16:56:21,697-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%EventEnd STAGE misc METHOD
otopi.plugins.ovirt_host_deploy.tune.tuned.Plugin._misc (None)
2018-02-07 16:56:21,698-0600 DEBUG otopi.context
context._executeMethod:128 Stage misc METHOD
otopi.plugins.ovirt_host_deploy.vdsm.vdsmid.Plugin._store_id
2018-02-07 16:56:21,698-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%EventStart STAGE misc METHOD
otopi.plugins.ovirt_host_deploy.vdsm.vdsmid.Plugin._store_id (None)
2018-02-07 16:56:21,699-0600 DEBUG otopi.transaction
transaction._prepare:61 preparing 'File transaction for '/etc/vdsm/vdsm.i=
d''
2018-02-07 16:56:21,699-0600 DEBUG otopi.filetransaction
filetransaction.prepare:183 file '/etc/vdsm/vdsm.id' missing
2018-02-07 16:56:21,705-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%EventEnd STAGE misc METHOD
otopi.plugins.ovirt_host_deploy.vdsm.vdsmid.Plugin._store_id (None)
2018-02-07 16:56:21,706-0600 DEBUG otopi.context
context._executeMethod:128 Stage misc METHOD
otopi.plugins.ovirt_host_deploy.vdsmhooks.hooks.Plugin._hooks
2018-02-07 16:56:21,706-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%EventStart STAGE misc METHOD
otopi.plugins.ovirt_host_deploy.vdsmhooks.hooks.Plugin._hooks (None)
2018-02-07 16:56:21,707-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%EventEnd STAGE misc METHOD
otopi.plugins.ovirt_host_deploy.vdsmhooks.hooks.Plugin._hooks (None)
2018-02-07 16:56:21,707-0600 DEBUG otopi.context
context._executeMethod:128 Stage misc METHOD
otopi.plugins.ovirt_host_common.vdsm.pki.Plugin._misc
2018-02-07 16:56:21,708-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%EventStart STAGE misc METHOD
otopi.plugins.ovirt_host_common.vdsm.pki.Plugin._misc (None)
2018-02-07 16:56:21,708-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ### Setting up PKI
2018-02-07 16:56:21,709-0600 DEBUG
otopi.plugins.ovirt_host_common.vdsm.pki plugin.executeRaw:813 execute:
('/usr/bin/openssl', 'req', '-new', '-newkey', 'rsa:2048', '-nodes',
'-subj', '/', '-keyout', '/tmp/tmpQkrIuV.tmp'), executable=3D'None',
cwd=3D'None', env=3DNone
2018-02-07 16:56:21,756-0600 DEBUG
otopi.plugins.ovirt_host_common.vdsm.pki plugin.executeRaw:863
execute-result: ('/usr/bin/openssl', 'req', '-new', '-newkey',
'rsa:2048', '-nodes', '-subj', '/', '-keyout', '/tmp/tmpQkrIuV.tmp'), rc=3D=
0
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ###
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ###
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ### Please issue VDSM
certificate based on this certificate request
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ###
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ***D:MULTI-STRING
VDSM_CERTIFICATE_REQUEST --=3D451b80dc-996f-432e-9e4f-2b29ef6d1141=3D--
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND -----BEGIN CERTIFICATE REQUEST--=
---
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
MIICRTCCAS0CAQAwADCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMZm
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
eYTWbHKkN+GlQnZ8C6fdk++htyFE+IHSzkhTyTSZdM0bPTdvhomTeCwzNlWBWdU+
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
PrVB7j/1iksSt6RXDQUWlPDPBNfAa6NtZijEaGuxAe0RpI71G5feZmgVRmtIfrkE
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
5BjhnCMJW46y9Y7dc2TaXzQqeVj0nkWkHt0v6AVdRWP3OHfOCvqoABny1urStvFT
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
TeAhSBVBUWTaNczBrZBpMXhXrSAe/hhLXMF3VfBV1odOOwb7AeccYkGePMxUOg8+
2018-02-07 16:56:21,757-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
XMAKdDCn7N0ZC4gSyEAP9mSobvOvNObcfw02NyYdny32/edgPrXKR+ISf4IwVd0d
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
mDonT4W2ROTE/A3M/mkCAwEAAaAAMA0GCSqGSIb3DQEBCwUAA4IBAQCpAKAMv/Vh
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
0ByC02R3fxtA6b/OZyys+xyIAfAGxo2NSDJDQsw9Gy1QWVtJX5BGsbzuhnNJjhRm
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
5yx0wrS/k34oEv8Wh+po1fwpI5gG1W9L96Sx+vF/+UXBenJbhEVfir/cOzjmP1Hg
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
TtK5nYnBM7Py5JdnnAPww6jPt6uRypDZqqM8YOct1OEsBr8gPvmQvt5hDGJKqW37
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
xFbad6ILwYIE0DXAu2h9y20Pl3fy4Kb2LQDjltiaQ2IBiHFRUB/H2DOxq0NpH4z7
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
wqU/ai7sXWT/Vq4R6jD+c0V0WP4+VgSkgqPvnSYHwqQUbc9Kh7RwRnVyzLupbWdM
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND Pr+MZ2D1jg27
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND -----END CERTIFICATE REQUEST----=
-
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND
--=3D451b80dc-996f-432e-9e4f-2b29ef6d1141=3D--
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%QStart: VDSM_CERTIFICATE_CHAI=
N
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ###
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ###
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ### Please input VDSM
certificate chain that matches certificate request, top is issuer
2018-02-07 16:56:21,758-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ###
2018-02-07 16:56:21,759-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ### type
'--=3D451b80dc-996f-432e-9e4f-2b29ef6d1141=3D--' in own line to mark end,=
'--=3D451b80dc-996f-ABORT-9e4f-2b29ef6d1141=3D--' aborts
2018-02-07 16:56:21,759-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND ***Q:MULTI-STRING
VDSM_CERTIFICATE_CHAIN --=3D451b80dc-996f-432e-9e4f-2b29ef6d1141=3D--
--=3D451b80dc-996f-ABORT-9e4f-2b29ef6d1141=3D--
2018-02-07 16:56:21,759-0600 DEBUG otopi.plugins.otopi.dialog.machine
dialog.__logString:204 DIALOG:SEND **%QEnd: VDSM_CERTIFICATE_CHAIN
2018-02-07 16:56:22,765-0600 DEBUG otopi.context
context._executeMethod:143 method exception
Traceback (most recent call last):
File "/tmp/ovirt-h7XmTvEqc3/pythonlib/otopi/context.py", line 133, in
_executeMethod
method['method']()
File
"/tmp/ovirt-h7XmTvEqc3/otopi-plugins/ovirt-host-common/vdsm/pki.py",
line 241, in _misc
'\n\nPlease input VDSM certificate chain that '
File "/tmp/ovirt-h7XmTvEqc3/otopi-plugins/otopi/dialog/machine.py",
line 327, in queryMultiString
v =3D self._readline()
File "/tmp/ovirt-h7XmTvEqc3/pythonlib/otopi/dialog.py", line 248, in
_readline
raise IOError(_('End of file'))
IOError: End of file
2018-02-07 16:56:22,766-0600 ERROR otopi.context
context._executeMethod:152 Failed to execute stage 'Misc configuration':
End of file
--nhGTtLudrG119NimaBSBZPnEVXBJuW62Y--
--X1liMzBwOelVuDr9VnkmQpyzIXGjCLTVO
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=shka
-----END PGP SIGNATURE-----
--X1liMzBwOelVuDr9VnkmQpyzIXGjCLTVO--
7 years, 2 months
