Error setting cluster level to 4.2
by Gianluca Cecchi
Hello,
after upgrading engine (external) and the 3 hosts composing the cluster, I
try to set its level to 4.2 but I receive this kind of message
"
Error while executing action: Update of cluster compatibility version
failed because there are VMs/Templates [ov42, ovlive3, ovlive4, ovlive1,
ovlive2] with incorrect configuration. To fix the issue, please go to each
of them, edit, change the Custom Compatibility Version of the VM/Template
to the cluster level you want to update the cluster to and press OK. If the
save does not pass, fix the dialog validation. After successful cluster
update, you can revert your Custom Compatibility Version change.
"
The ovliveN VMs are diskless where I boto from the oVirt live iso for
testing and ov42 a nested single VM where I tested the oVirt 4.2
environment before upgrade of the real cluster.
I suspect that the problem could be related with macspoof custom property
set to true.
Is this? In case how can I manage this sort of problem?
Can't I have macspoof in 4.2?
Thanks,
Gianluca
7 years, 1 month
Need advice using pacemaker on VMs for application HA
by wodel youchi
Hi,
Excuse the English :)
Need some advice regarding the use of high availability software on VMs on
oVirt.
We are migrating a physical high available application to oVirt.
The HA platform uses pacemaker, it contains two nodes and a shared storage,
fence (stonith) is configured to use ILO.
I know that oVirt offers HA for VM, but this HA is not application aware,
if a service crashes on the VM, it will not be detected.
Fencing could be achieved by fence agent rhev.
My questions are about the best way to migrate this platform to oVirt.
- Is it a good idea to make both VMs (formally nodes) Highly-Available VMs?
or may be pin each one of them to a particular hypervisor and/or use
VM-Affinity?
- I am thinking about the situation where the hypervisor containing one of
the VMs crashes, what will be the behavior of the the fence agent on the
application?
- if the crashed VM is not HA, it will not start on another hypervisor,
so the fence agent will try to fence a VM that does not exist anymore, and
it will stuck.
- if the crashed VM is HA, it will be started on another hypervisor, but
what will happen with the fence agent? I think that one VM will fence the
other one, and the application will still be unreachable for a longer
period.
- What about the shared storage, we will use a shared disk on oVirt which
does not support snapshot
- What are the things to avoid?
Any suggestions will be appreciated.
Regards.
7 years, 1 month
Re: Ovirt 4.2.3 missing features?
by Simone Tiraboschi
On Thu, May 24, 2018 at 5:30 PM, Guilhem Berna <gberna(a)phosphore.eu> wrote:
> Unfortunately the menu is the same when clicking on name.
>
Try clicking with the left button: it will open a new page where you will
find the snapshot tab.
Check the attached screenshot.
Now the URLs are also predictable so you can easily directly edit it or
bookmark for a direct access.
>
> Best regards,
>
> Guilhem Berna
> Administrateur Système PHOSPHORE.si - https://www.phosphore.si
> +33 4 66 51 87 73
>
> ------------------------------
> *De: *"Simone Tiraboschi" <stirabos(a)redhat.com>
> *À: *"Guilhem Berna" <gberna(a)phosphore.eu>
> *Cc: *"users" <users(a)ovirt.org>
> *Envoyé: *Jeudi 24 Mai 2018 17:05:08
> *Objet: *Re: [ovirt-users] Ovirt 4.2.3 missing features?
>
>
>
> On Thu, May 24, 2018 at 4:07 PM, Guilhem Berna <gberna(a)phosphore.eu>
> wrote:
>
>> Hi,
>>
>> New user of ovirt here, i'm trying ovirt 4.2.3.5-1 on centos 7.5.
>> On the web administration interface i'm missing a lot of features
>> compared to the guides I can find online or even compared to the official
>> docs.
>>
>> For example I can't find how to restore a snapshot, I don't have the
>> snapshot tab as mentionned here : https://www.ovirt.org/
>> documentation/user-guide/user-guide/#using-a-snapshot-to-
>> restore-a-virtual-machine
>> I can't find how to convert a machine to a template either :
>>
>>
>>
>> Is there something i'm missing? Am I running the wrong version or do I
>> need to configure something ?
>>
>
> Did you tried clicking on the VM name?
>
> The UI pattern is slightly different from how it used to be in previous
> versions.
>
>
>>
>> Best regards,
>>
>> 4.2.3
>> <https://www.ovirt.org/documentation/user-guide/user-guide/#using-a-snapsh...>
>>
>> Guilhem Berna
>> Sysadmin PHOSPHORE.si - https://www.phosphore.si
>>
>>
>>
>> _______________________________________________
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>>
>>
>
7 years, 1 month
Discard is not supported by underlying storage
by Julio Cesar Bustamante
Hi there,
I have tried o add a ID LUN from IBM Storage DS3524 by fiber channel, but
it appeared this message " Discard is not supported by underlying storage".
What am I doing wrong ? Should I do anything else previously?.
The version Ovirt manager is 4.2.0.2-1.
--
Julio Cesar Bustamante.
7 years, 1 month
oVirt Privacy policy change
by Sandro Bonazzola
*As part of an oVirt project review, we're publishing an updated privacy
policy.You should read the statement fully, but the key updates include:*
Clearer descriptions of how oVirt uses your personal data to provide
services;* Additional detail on how your personal data may be shared to
serve the public interest and that of the open source community; and* More
focus on how you can review, modify, and update your personal data.You can
find the new statement on the oVirt website at this location:
https://ovirt.org/site/privacy-policy/
<https://ovirt.org/site/privacy-policy/>oVirt website pages have been
updated to include links to the privacy policy. The new privacy statement
takes effect on Friday, May 25, 2018.*
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://redhat.com/summit>
7 years, 1 month
oVirt Privacy policy change
by Sandro Bonazzola
*As part of an oVirt project review, we're publishing an updated privacy
policy.You should read the statement fully, but the key updates include:*
Clearer descriptions of how oVirt uses your personal data to provide
services;* Additional detail on how your personal data may be shared to
serve the public interest and that of the open source community; and* More
focus on how you can review, modify, and update your personal data.You can
find the new statement on the oVirt website at this location:
https://ovirt.org/site/privacy-policy/
<https://ovirt.org/site/privacy-policy/>oVirt website pages have been
updated to include links to the privacy policy. The new privacy statement
takes effect on Friday, May 25, 2018. *
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://redhat.com/summit>
7 years, 1 month
hosted engine setup error
by dhy336＠sina.com
hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but face some error bridge ovirtmgmt is not configure, i should how to do? thanks
[ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.010899", "end": "2018-05-23 20:03:21.222559", "rc": 0, "start": "2018-05-23 20:03:21.211660", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources
vdsm.log
2018-05-23 19:55:15,305+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') VM wrapper has started (vm:2619)2018-05-23 19:55:15,454+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Starting connection (guestagent:245)2018-05-23 19:55:15,458+0800 ERROR (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Failed to connect to guest agent channel (vm:2403)Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2401, in _vmDependentInit self.guestAgent.start() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 246, in start self._prepare_socket() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 288, in _prepare_socket supervdsm.getProxy().prepareVmChannel(self._socketName) File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in <lambda> **kwargs) File "<string>", line 2, in prepareVmChannel File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result)OSError: [Errno 2] No such file or directory: '/var/lib/libvirt/qemu/channels/bfc6f7cf-3e8d-4368-97f8-78a5c74a5175.com.redhat.rhevm.vdsm'2018-05-23 19:55:15,480+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') CPU running: domain initialization (vm:5908)
[root@hosted-engine-test1 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:6c:ee:a8 brd ff:ff:ff:ff:ff:ff inet 192.168.122.217/24 brd 192.168.122.255 scope global dynamic eth0 valid_lft 2936sec preferred_lft 2936sec inet6 fe80::834a:9cc1:df2:83f/64 scope link valid_lft forever preferred_lft forever18: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 9a:d1:bc:96:cc:c0 brd ff:ff:ff:ff:ff:ff19: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff inet 192.168.124.1/24 brd 192.168.124.255 scope global virbr0 valid_lft forever preferred_lft forever20: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff
7 years, 1 month
Fwd: Shameless networking question
by Ales Musil
On Wed, May 23, 2018 at 2:43 PM, Peter Harman <pharman(a)homeyertool.com>
wrote:
> Ovirt Community,
>
>
>
> First off: thank you – these emails have helped me to get Ovirt running. I
> barely know what I am doing but learning quickly.
>
>
>
> I am trying to do a network separation and confusing myself. I have two
> physical networks (10.10.x.x/16 and 192.168.1.x/24) my ovirt management is
> bridged on 10.10.x.x. My (currently single) Hosts have at least one
> physical NIC connecting to each network. I am trying to get to the point
> there the VMs are on the 192.168.1.x network and the 10.10.x.x network. The
> goal is to join the VMs to a AD domain on 192.168.1.x but keep access as
> limited as possible to the 10.10.x.x network.
>
>
>
> I’ve been on a googlethon over the past few days and still don’t
> understand the best practice – or even a working practice – to accomplish
> this goal.
>
>
>
> *Peter Harman – Systems and Safety Cordinator | Homeyer Precision
> Manufacturing*
>
>
>
> [image: Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer
> Logo (2).zip\Homeyer Logo\Homeyer Logo.jpg]
>
>
>
> 16051 State Hwy 47, Marthasville, MO 63357| *E *pharman(a)homeyertool.com |
> *P* 636.433.2244 | *F* 636.433.5257
>
>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
>
>
Hi Peter,
if I understand this correctly you can achieve that by marking the
192.168.1.x network as VM network via UI: Networks -> Desired network ->
Edit -> Check VM network and save. Then in any VM that you want to be on
this network set NICs VNIC profile that is connected to 192.168.1.x via UI:
Virtual Machines -> Desired VM -> Network Interfaces -> nicX -> Edit ->
Profile -> Select profile that is connected to 192.168.1.x -> Save. If the
VM is up and running you need to first unplug the interface save it and
then change profile and plug it in again. Hopefully this helps.
Regards,
Ales
--
ALES MUSIL
INTERN - rhv network
Red Hat EMEA <https://www.redhat.com/>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
7 years, 1 month
