July 2018 - Users - oVirt List Archives

VM Portal
by carl langlois 26 Jul '18

26 Jul '18

Hi, I know thta the VM portal add issue with displaying user VMs. It seem to be fix with this bug *https://bugzilla.redhat.com/show_bug.cgi?id=148087 <https://bugzilla.redhat.com/show_bug.cgi?id=148087>* But if i try the portal does not show anything, My engine is up to date with 4.2 repo. It this still a issue? Thanks

2 3

can't connect to spice console
by Deekshith 26 Jul '18

26 Jul '18

Regards Deekshith

1 0

Switching from Public Network to Private Network Space
by Sakhi Hadebe 26 Jul '18

26 Jul '18

Hi, We have installed oVirtNode-4.2.4 in 3 host machines and is running fine. All the hosts machines and the engine are on Public IP address space 15x.xxx.xx.xx Host1 15x.xxx.xx.xx Host2 15x.xxx.xx.xx Host3 15x.xxx.xx.xx Engine VM We wanna move the cluster nodes and the engine VM to the privaye IP address space and access them through VPN. Besides the network interfaces files, which other files can we change for a smooth transition to private IP address space Below is the current network setup on the host machines: bond0.20 - VLAN for the public bridge bond0.20 - VLAN for ovirtmgmt brigde bond0.22 - VLAN for storage briidge ovirtmgmt bridge interface: [root@host2 network-scripts]# cat ifcfg-ovirtmgmt # Generated by VDSM version 4.20.32-1.el7 DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes IPADDR=15x.xxx.xx.xx NETMASK=255.xxx.xxx.xxx BOOTPROTO=none MTU=9000 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=yes IPV6_AUTOCONF=yes [root@host2 ~]# ifconfig bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 4051316 bytes 1013145487 (966.2 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 14031524 bytes 17967035125 (16.7 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond0.20: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 3836861 bytes 912581782 (870.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3183802 bytes 17125114804 (15.9 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond0.22: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::a9e:1ff:fe87:cae1 prefixlen 64 scopeid 0x20<link> ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8 bytes 648 (648.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 em1: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 2591947 bytes 739574288 (705.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 9112112 bytes 11340058277 (10.5 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 em2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 1459369 bytes 273571199 (260.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4919412 bytes 6626976848 (6.1 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 genev_sys_6081: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 65000 inet6 fe80::3807:70ff:feb3:15d1 prefixlen 64 scopeid 0x20<link> ether 3a:07:70:b3:15:d1 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 8 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 11464303 bytes 90848049840 (84.6 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11464303 bytes 90848049840 (84.6 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ovirtmgmt: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 15x.xxx.xx.xx netmask 255.255.255.240 broadcast 15x.xxx.xx.xx inet6 fe80::a9e:1ff:fe87:cae1 prefixlen 64 scopeid 0x20<link> ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 4050802 bytes 916285919 (873.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2955965 bytes 17099409954 (15.9 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 p2p1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 90:e2:ba:3d:90:f4 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 p2p2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 90:e2:ba:3d:90:f5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.124.1 netmask 255.255.255.0 broadcast 192.168.124.255 ether 52:54:00:bd:16:db txqueuelen 1000 (Ethernet) RX packets 5260 bytes 3927233 (3.7 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 5590 bytes 3342473 (3.1 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::fc16:3eff:fe05:44 prefixlen 64 scopeid 0x20<link> ether fe:16:3e:05:00:44 txqueuelen 1000 (Ethernet) RX packets 8952 bytes 17748713 (16.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 14842 bytes 4166526 (3.9 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 -- Regards, Sakhi Hadebe Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za>

1 0

Hosted Engine Deploy kernel panics on boot
by Karli Sjöberg 26 Jul '18

26 Jul '18

Hey all! I'm trying to deploy Hosted Engine through the Cockpit UI and it's going well until it's time to start the local VM and it kernel panics: [ 2.032053] Call Trace: [ 2.032053] [<ffffffffb687e78c>] load_elf_binary+0x33c/0xe50 [ 2.032053] [<ffffffffb68f3919>] ? ima_bprm_check+0x49/0x50 [ 2.032053] [<ffffffffb687e450>] ? load_elf_library+0x220/0x220 [ 2.032053] [<ffffffffb682236f>] search_binary_handler+0xef/0x310 [ 2.032053] [<ffffffffb6823b4b>] do_execve_common.isra.24+0x5db/0x6e0 [ 2.032053] [<ffffffffb6823c68>] do_execve+0x18/0x20 [ 2.032053] [<ffffffffb66afc1f>] ____call_usermodehelper+0xff/0x140 [ 2.032053] [<ffffffffb66afb20>] ? call_usermodehelper+0x60/0x60 [ 2.032053] [<ffffffffb6d20677>] ret_from_fork_nospec_begin+0x21/0x21 [ 2.032053] [<ffffffffb66afb20>] ? call_usermodehelper+0x60/0x60 [ 2.032053] Code: cf e9 ff 4c 89 f7 e8 7b 32 e7 ff e9 4d fa ff ff 65 8b 05 03 a0 7e 49 a8 01 0f 84 85 fc ff ff 31 d2 b8 01 00 00 00 b9 49 00 00 00 <0f> 30 0f 1f 44 00 00 48 c7 c0 10 00 00 00 e8 07 00 00 00 f3 90 [ 2.032053] RIP [<ffffffffb6823025>] flush_old_exec+0x725/0x980 [ 2.032053] RSP <ffff8add75ecbd00> [ 2.298131] ---[ end trace 354b4039b6fb0889 ]--- [ 2.303914] Kernel panic - not syncing: Fatal exception [ 2.304835] Kernel Offset: 0x35600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) I've never had this problem so I'd just want to know if it's a known issue right now or if I've done anything special to deserve this:) The "Hosts" I'm deploying this on are VMs with nested virt activated, and I've done this before but this time around it's bombing, as earlier explained. Thanks in advance! /K

2 7

Re: Failed to Run VM on host (self hosted engine)
by Deekshith 26 Jul '18

26 Jul '18

Dear Team I have reinstalled the OS and tried issue is same unable to launch the VM, I don’t have any SAN or any storages it’s all in Local . Please help me to resolve the issue My server details Lenovo x3650 M5 , Deekshith

4 28

Q: Power failure - proper data center shutdown procedure
by Andrei Verovski 26 Jul '18

26 Jul '18

Hi, I have the following simple setup: oVirt engine - 4.2.3 (running as KVM appliance on SuSE Linux) node1.1 - 4.2.1 (installed with clean CentOS and newer elrepo 4.15.4-1el1 kernel) node1.2 - 4.2.3 (installed with clean CentOS and newer elrepo 4.16.2-1el7 kernel) VMs - Debian, CentOS, and Windows guests, with ovirt-agent installed (except one with Linux telephony software). What is the proper shutdown procedure in case of power failure? I have simple scripts which simply run “shutdown now” on each host after 10 min. However, oVirt nodes fail to shutdown properly, process take about 25 minutes. node1.2 libvirt-guests.sh[10696]: Waiting for guest GUEST_VM_NAME to shut down node1.1 - these processes took VERY LONG time: Unmounting /rhev/data-center/mnt/node11.mydomain.com:_vm_raid_nfs_export… Unmounting /rhev/data-center/mnt/node12.mydomain.com:_vm_raid_nfs_disks… Unmounting /rhev/data-center/mnt/node11.mydomain.com:_vm_raid_nfs_disks… Unmounting /rhev/data-center/mnt/node11.mydomain.com:_vm_raid_nfs_iso… on both nodes: [] Forcibly powering off: job timed out as result, OS is down, server is not, still drawing power from UPS battery. Powering on was problematic, I had to restart node11 2nd time before it becomes “green” in oVirt engine. One VM failed to start with error message “Can’t acquire ticket” and struck with grey arrows (with no possibilty to make anything) - unfortunately, I forgot to take screenshot or record exact message. Restarting node1.1 cured that problem. Q: what is proper oVirt data center automatic shutdown procedure? Thanks in advance Andrei

1 0

Uncaught exception occurred - NS_ERROR_FILE_CORRUPTED
by Michael Seidel 26 Jul '18

26 Jul '18

Hi, I am running oVirt in version 4.2 and just started getting this error message upon login: Uncaught exception occurred. Please try reloading the page. Details: (NS_ERROR_FILE_CORRUPTED) : Please have your administrator check the UI logs The relevant content of the ui.log is given below (or, nicely formatted at https://paste.ee/p/LUrbt) I am able to access the js file directly using a browser so the file is definitely not missing and is readable. However, the side-bar of the ovirt webadmin is not showing (or more precisely: it loads and shows for a split-second and then disappears). The Web Console shows a similar error message as the one below, referring to the same js file and in addition says: Tue Jul 24 14:28:03 GMT+200 2018 com.gwtplatform.mvp.client.presenter.slots.LegacySlotConvertor SEVERE: Warning: You're using an untyped slot! Untyped slots are dangerous! Please upgrade your slots using the Arcbee's easy upgrade tool at https://arcbees.github.io/gwtp-slot-upgrader The github-URL however is not working. I also upgraded and rebooted the ovirt engine, but the error remains. Do you have any suggestions what might cause this issue and how I can fix it. Best, - Michael 2018-07-24 14:19:24,582+02 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-1) [] Permutation name: 2029DD69C3B3D95611AAF9AC05D7EF9B 2018-07-24 14:19:24,582+02 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-1) [] Uncaught exception: com.google.gwt.core.client.JavaScriptException: (NS_ERROR_FILE_CORRUPTED) : at Unknown.loadFromLocalStorage(https://XXXXX/ovirt-engine/webadmin/theme/00-ovirt.brand/patternfly-functions-vertical-nav-custom-3.26.1.js) at Unknown.init(https:/XXXXX/ovirt-engine/webadmin/theme/00-ovirt.brand/patternfly-functions-vertical-nav-custom-3.26.1.js) at Unknown.fn.setupVerticalNavigation(https://XXXXX/ovirt-engine/webadmin/theme/00-ovirt.brand/patternfly-functions-vertical-nav-custom-3.26.1.js) at org.ovirt.engine.ui.webadmin.section.main.view.MainSectionView$lambda$0$Type.execute(MainSectionView.java:45) at com.google.gwt.core.client.impl.SchedulerImpl.runScheduledTasks(SchedulerImpl.java:167) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl.$flushPostEventPumpCommands(SchedulerImpl.java:338) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl$Flusher.execute(SchedulerImpl.java:76) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl.execute(SchedulerImpl.java:140) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.apply(Impl.java:236) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:275) [gwt-servlet.jar:] at Unknown.Ju/<(https://XXXXX/ovirt-engine/webadmin/?locale=en_US) at Unknown.d(https://XXXXX/ovirt-engine/webadmin/?locale=en_US) at Unknown.anonymous(Unknown) Helmholtz Zentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt (GmbH) Ingolstaedter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir'in Baerbel Brumme-Bothe Geschaeftsfuehrer: Prof. Dr. Guenther Wess, Heinrich Bassler, Dr. Alfons Enhsen Registergericht: Amtsgericht Muenchen HRB 6466 USt-IdNr: DE 129521671

1 1

Self hosted to bare metal engine
by Christophe TREFOIS 25 Jul '18

25 Jul '18

Hi, What would be the process to go from self hosted engine to bare metal engine? (Actually it would move to a VM in a VMware cluster) All user guides I found are from bare metal to self hosted. Thanks for any tips or pointers Christophe Sent from my iPhone

2 3

Cannot switch to maintenance, image transfer is in progress
by Randy Bender 25 Jul '18

25 Jul '18

We've just updated our hosted engine to 4.2.4. When trying to place one of the hosts in maintenance mode, we get the error in the subject line. I've found the following that looks to be the issue we are hitting: https://bugzilla.redhat.com/show_bug.cgi?id=1586126 I've looked in the engine database with the following command and results: engine=# select disk_id from image_transfers ; disk_id -------------------------------------- 52966b71-2d01-4a16-9830-65a888717656 c72d64b7-93c9-485b-b031-29c785c5bf9a (2 rows) Full details on these records show that they are indeed old - there are no transfers actually in progress. Can anyone confirm the correct way to remedy this? The bug report notes changing the phase on the record in question. Before I try that, I'd like confirmation if anyone else has seen this issue and resolved it. And if this is the resolution, can you describe the exact psql commands to achieve this? Thanks

3 3

Freshly installed ovirt-node-ng 4.2.4 unable to deploy hosted-engine
by Ralf Schenk 25 Jul '18

25 Jul '18

Hello List, after having freshly installed my first ovirt-node-ng 4.2.4 configuring basic networking and preparing NFS Shares on my NFS-Server I would like to deploy hosted engine on this first host and NFS Storage. In Cockpit I set Performance Profile to "virtual host" and mounted an export from my Sotrage as /mnt/engine (Which shouldn't be needed since I expected the engine-setup wizard to ask me...) I'm, already stuck when selecting "Hosted Engine Deploy oVirt hosted engine on storage that has already been provisioned": save image "hosted-engine-setup" on the command-line is not available. Furthermore I've warnings in Node Health Status. I didn't configure discard anywhere. It is used as it was set up by the installer on the logical volumes residing on a SATA Disk. save image save image -- *Ralf Schenk* fon +49 (0) 24 05 / 40 83 70 fax +49 (0) 24 05 / 40 83 759 mail *rs(a)databay.de* <mailto:rs@databay.de> *Databay AG* Jens-Otto-Krag-Straße 11 D-52146 Würselen *www.databay.de* <http://www.databay.de> Sitz/Amtsgericht Aachen • HRB:8437 • USt-IdNr.: DE 210844202 Vorstand: Ralf Schenk, Dipl.-Ing. Jens Conze, Aresch Yavari, Dipl.-Kfm. Philipp Hermanns Aufsichtsratsvorsitzender: Wilhelm Dohmen ------------------------------------------------------------------------

3 2

interface up when not used
by Fabrice Bacchella 25 Jul '18

25 Jul '18

To monitoring the network interfaces, I have a script that check if ifAdminStatus and ifOperStatus values matches in snmp. But with oVirt it fails on a server with 4 physical interfaces, but only two connected, and return an error: snmptable XXX IF-MIB::ifTable | less SNMP table: IF-MIB::ifTable ifIndex ifDescr ifAdminStatus ifOperStatus 1 lo up up 2 eth0 up up 3 eth1 up up 4 eth2 up down 5 eth3 up down 24 ;vdsmdummy; down down 25 vnet0 up up And indeed on the server: ip link show eth2 4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether 40:a8:f0:30:81:1a brd ff:ff:ff:ff:ff:ff It's up, but I don't configured it on oVirt, removed ifcg-eth2. Is there a way to disable it ?

3 5

Sync LDAP users in Ovirt
by Hari Prasanth Loganathan 25 Jul '18

25 Jul '18

Hi Team, Good Morning. I configured the ovirt with LDAP setup. Is there an *oVirt tool* (or any way) to add all the users from LDAP to Ovirt? *Observation* : 1) I am able to see that when I try to login with the user from LDAP, that user is added in Ovirt database, So Is there a way to sync all the users from LDAP to Ovirt using any oVirt tool or API? Any help is much appreciated. Thanks, Hari -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

3 11

Raid configuration for single instance
by Leo David 25 Jul '18

25 Jul '18

Hello everyone, Based on your experiance or well know best practices can you provide me with an advice on raid configuration ? I have a single server, that will have a couple of brand new enterprise grade ssds, spinning and one pci nvme card. The server ( Dell PE r630 ) comes wirt Perc h730p raid controller with 2gb cache. I am thinking of creating a raid 1 array with the 2 of ssd's and ne raid10 array woth the rest of for spinning hdds. Then different gluster volume on each, to provide me 2 ( ssd / sata ) storage domains. What do you think on haveing raid1 / raid10 as underlying HA storage for gluster volumes ? At the moment a have some consumer devices ( samsung evo & seagate spinning shingled type ) and about every day the vms get into "VM has been paused due to storage IO errors" - i am thinking because of bad type hdds. Any thoughts on these ? Thank you , Leo -- Best regards, Leo David

3 5

Deleting master storage
by jin&hitman&Barracuda 25 Jul '18

25 Jul '18

Hi, Trying to build an ovirt system and i'm stuck with storage problem. I've prepared iscsi storage and seems like my storage had some troubles and now i could not get it online again. That is another story. I just want to delete master storage domain on ovirt manager. Looks like this is not allowed since there is no storage domain candidate to take master role. Also i could not add another storage domain becouse that is not allowed too. It says "can not add because there is no active storage domain" or something similar. Basically i'm stuck and don't know how to delete storage domain (master) without tear down all of them.

2 2

Backup Strategies
by Markus Schaufler 25 Jul '18

25 Jul '18

Hi! We use in our test infrastructure a NetApp shared fc storage and wonder how a backup strategie could look like. Full backups aren't the problem - trigger HV Snapshots including guest FS freeze / quiece, trigger NetApp Snapshot, delete HV Snapshots. Currently I'm struggeling on how to recover those Backups. I would provide the Snapshot volume to the hosts and import it as a new data domain, so the hosts have the snapshot disks as logical volumes. But how could I recover respectively move the content of the snapshot volumes onto the currently used vm "disk volumes"? If I have the proof of concept then scripting it to make this process more comfortable wouldn't be a problem. How do you do your backups with shared san? How can I provide incremental Backups? Thanks for any help!

1 0

metrics
by suporte＠logicworks.pt 24 Jul '18

24 Jul '18

Hi, I'm trying to configure oVirt metrics but when i run # ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/ansible-inventory-origin-39-aio playbooks/deploy_cluster.yml i always get this error: Failure summary: 1. Hosts: localhost Play: Verify Requirements Task: Validate openshift_node_groups and openshift_node_group_name Message: last_checked_host: localhost, last_checked_var: openshift_node_group_name;openshift_node_group_name must be defined for all nodes What am I missing here? Thanks -- Jose Ferradeira http://www.logicworks.pt

3 14

[ANN] oVirt 4.2.5 Third Release Candidate is now available
by Lev Veyde 24 Jul '18

24 Jul '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.5 Third Release Candidate, as of July 24th, 2018. This update is a release candidate of the fifth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.5 release highlights: http://www.ovirt.org/release/4.2.5/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.5/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Re: Failed to Run VM on host (self hosted engine)
by Deekshith 24 Jul '18

24 Jul '18

Dear Team I one more time reinstalled host and installed overt engine 4.0 ,now I showing white screen on browser From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 24 July 2018 11:47 To: 'Greg Sheremeta'; 'ebenahar(a)redhat.com'; 'talayan(a)redhat.com'; 'ravishankar(a)redhat.com'; 'dchaplyg(a)redhat.com'; 'alukiano(a)redhat.com' Cc: 'Roy Golan'; 'devel'; 'users'; 'girishrs(a)binaryindia.com'; 'IT Support Mangalore' Subject: Failed to Run VM on host (self hosted engine) Dear team It is a new installation , everything is ok but vm is not coming up , please help me out solve this issue. Regards Deekshith 9964507515,9481707515 From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 23 July 2018 05:34 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Please run these commands, and attach the output ls -lhZ $(realpath /rhev/data-center/mnt/_ovirt_DATA) ausearch -m avc -ts this-week On Mon, Jul 23, 2018 at 7:44 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear Team This is the error , please help me to resolve the issue. Regards Deekshith From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 23 July 2018 11:41 To: 'Greg Sheremeta' Cc: 'Roy Golan'; 'devel'; 'users' Subject: RE: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Dear team Please find the attached KVM error file. Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 22 July 2018 06:09 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils It appears you have permission issues on your storage. I see you are using storageType='LOCALFS' per https://www.ovirt.org/documentation/admin-guide/chap-Storage/ "Ensure that the directory has permissions allowing read/write access to the vdsm user (UID 36) and kvm group (GID 36)." Can you verify that? 2018-07-20 12:10:33,757+0530 ERROR (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') The vm start process failed (vm:943) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2876, in _run dom.createWithFlags(flags) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirtError: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799 c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408 d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d- b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied 2018-07-20 12:10:33,757+0530 INFO (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') Changed state to Down: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied (code=1) (vm:1683) On Fri, Jul 20, 2018 at 6:00 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear Team Please find attached Log files , Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 07 July 2018 03:58 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Hi, Please attach logs -- engine.log and vdsm.log at least. Any others where you see errors, too. Best wishes, Greg On Sat, Jul 7, 2018 at 1:59 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team I have clean the os and installed 4.2 ovirt engine , host, datacenter ,data domain, all are up but vm is not coming up .please help me to resolve the issue. Regards Deekshith From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 02 July 2018 04:54 To: 'Roy Golan' Cc: 'Greg Sheremeta'; 'devel'; 'users' Subject: RE: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Hi team Can i have some best practice self hosted engine setup guide . i am cleaning up the os (fresh installation ) and give me some backup tips for future corruption issues. Server model : Lenovo 3650 m5 Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 26 June 2018 12:42 To: Deekshith Cc: Greg Sheremeta; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 26 Jun 2018 at 09:47 Deekshith <deekshith(a)binaryindia.com> wrote: What about data if i cleanup the OS ? See here https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/ If you want to avoid the backup/restore you can try reinstalling some of the packages: yum reinstall ovirt-engine-wildfly and run engine-setup. Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 26 June 2018 12:14 To: Deekshith Cc: Greg Sheremeta; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 26 Jun 2018 at 07:23 Deekshith <deekshith(a)binaryindia.com> wrote: Hi team It was installed 1 year back , 10 days before we were not able to take the console and webadmin of the server, it was working only 10 minutes once manually restart the server, so I tried refreshing the engine (engine cleanup)but same issue ,so I upgraded my centos 7.2 to 7.4 then i got webadmin and console of the server ,now my first problem is resolved ...but host is not coming up.... I recommend you do an engine-backup, clean up the os (yum update, ensure proper ovirt repo for you version) and do engine-setup and restore. Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 25 June 2018 06:49 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users; allentvpm(a)gmail.com Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is this a fresh install or an upgrade to 4.1? On Mon, Jun 25, 2018 at 3:41 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Engine version is 4.1 and I am able to take the console and webadmin from the browser. All the vm data is available in the host . But host is not coming up. I upgrade from the NET( YUM UPDATE) all the necessary packages downloaded .. let me know if any log files needed. Please help me to resolve the issue . Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 22 June 2018 03:22 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users; allen_john(a)mrpl.co.in Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is your engine functioning at all? I'm not sure if you're saying your entire engine doesn't work, or just host deploy doesn't work. What version of ovirt engine is this? How did you install -- fresh installation, upgrade? From source or rpm? Best wishes, Greg On Wed, Jun 20, 2018 at 12:35 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Please find the attached server and host logs.. ovirt host unresponsive(down), unable to install node packages. Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 19 June 2018 06:57 To: Greg Sheremeta Cc: devel; users; deekshith(a)binaryindia.com; allen_john(a)mrpl.co.in Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 19 Jun 2018 at 16:04 Greg Sheremeta <gshereme(a)redhat.com> wrote: Sending to devel list. Anyone ever seen this before? It sounds like a bad installation if Java classes are missing / classloader issues are present. 2018-06-18 11:23:11,287+05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Correlation ID: d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Installing Host Node. Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-20180618112311-mrpl.kvm2-d6a2578b-c58f-43be-b6ad-30a3a0a57a74.log'. 2018-06-18 11:23:12,131+05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Correlation ID: d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Installing Host Node. Stage: Termination. 2018-06-18 11:23:12,193+05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to mrpl.kvm2/172.31.1.32 2018-06-18 11:23:12,206+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils 2018-06-18 11:23:12,206+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Command 'PollVDSCommand(HostName = Node, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='d862d5c8-c75e-42ee-867f-ca16a228c2ad'})' execution failed: java.util.concurrent.ExecutionException: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils 2018-06-18 11:23:12,707+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is that a regular installation and what version? jdk version? server.log engine.log On Tue, Jun 19, 2018 at 8:50 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Please find attached ovirt-engine log . Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 19 June 2018 05:53 To: deekshith(a)binaryindia.com Cc: users Subject: Re: [ovirt-users] Unable to start Ovirt engine What does it say in the /var/log/ovirt-engine/setup/ovirt-engine-setup-xxxxxx.log? On Sun, Jun 17, 2018 at 6:01 AM Deekshith <deekshith(a)binaryindia.com> wrote: Hi Team Please anyone help me to solve this issue. 1. Error! Filename not specified. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QPBXKHLK4NSU6… -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AA4B5IPQL7O2… -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

2 1

Xen Free Edition migration to oVirt
by Sandro Bonazzola 24 Jul '18

24 Jul '18

Hi, If you were using Xen Free Edition or if you are still using it, after https://xenserver.org/blog/entry/xenserver-7-3-changes-to-the-free-edition.… you may be looking at oVirt as alternative. A community tool to ease the migration exist here: https://github.com/zipurman/oVIRT_Simple_Backup. Did you migrate to oVirt or are you planning it? I was wondering if it may help organizing an hackathon day for helping users doing the migration would make sense, so I'd like to know if there are users looking for assistance in the migration process. Let us know! -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

2 1

How to keep VM running when a storage domain is offline
by Matthew B 24 Jul '18

24 Jul '18

Hello, I am trying to understand how I can prevent a VM from being paused when one of it's disks is unavailable due to a problem with the storage domain. The scenario: A VM with 3 disks. OS disk on a highly available domain. And Two large disks each on separate domains. (so a total of 3 domains). The two large disks are mirrored using ZFS - but when one of the storage domains goes down the VM pauses. Is is possible to configure the VM to not pause when certain storage domains are unavailable? So instead of getting Paused due to IO error the disk would just be missing until that domain was brought back online? Thanks, -Matthew

3 2

Re: PRODECDURE DOCUMENTATION: Mounting GPFS as STORAGE DOMAIN
by Nir Soffer 24 Jul '18

24 Jul '18

On Mon, Jul 23, 2018 at 4:51 PM Jose E Torres <jtorres(a)bsc.es> wrote: > Recently I opened a thread on ovirt-users-list to ask about how can I > mount GPFS as a Storage Domain, and after a few tries I finally mounted it > correctly. > > On the last comment you ask me to document the procedure: > I asked to file a bug for documenting it. > >> Thanks for the info! > >> Can you file oVirt bug to document this procedure? > > I don't know how to do it exactly, please, can you give me indications to > do that? Im ready for collaborate on what I can. > Sorry for not being clear. You can open a bug here: https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine Daniel, is ovirt-engine the best place for this bug, or we have a better place? Component: Documentation oVirt team: Docs In the description: - describe the user visible issue - describe the root cause (missing mount option?) - describe the solution - suggest where this solution should be documented in the manual - link to the discussion on users list The thread is: > https://lists.ovirt.org/archives/list/users@ovirt.org/thread/LLXLSI4ZQFU32P… > > Thanks in advance an sorry if this is not the correct channel to ask this > type of questions. > I think it is better to ask on the mailing list. You may get a faster response, and others may benefit from the discussion. Thanks for your contribution! Nir

1 0

Error when change CD
by markus.schaufler＠ooe.gv.at 24 Jul '18

24 Jul '18

Hi! I created an NFS ISO Domain but couldn't find any upload button. Because uploading ISO files on the Data Domain I went that comfortable way. I successfully started Installation of Windows Server 2016 until the virtio Drivers for the disk are needed. So I tried to Change CD but following error occured: "Error while executing Action Change CD: Drive Image file could not be found" Changing CD works when using another ISO file like Centos. The iso itself is good - I can read it on my own System - but anyhow I tried another download of the virtio-win-iso - with the same result. I already found several threads around this Topic - e.g. "do not upload ISO files to data Domain" So I'd like to know how the upload to the ISO Domain is supposed to work if there's no "upload" button? Directly via SCP into the subfolders? Did I miss some configuration or is the workflow in uploading ISO's respectively in installing a Windows VM wrong? Thanks for any help!

3 2

vGPU question
by femi adegoke 24 Jul '18

24 Jul '18

Planning to build a hyperconverged 3 host w HE oVirt cluster + Gluster. Is it ok if only one of the hosts has a GPU?

2 1

Is enabling Epel repo will break the installation?
by Arman Khalatyan 24 Jul '18

24 Jul '18

Hello, As I remember some time ago the epel collectd was in conflict with the ovirt one. Is it still the case? Thanks, Arman.

3 3

Ovirt4.2 AD integration issue
by Arun S 24 Jul '18

24 Jul '18

Hello, I need help to resolve Ovirt AD auth setup issue. I have setup ovirt-engine-4.2 and I am trying to integrate with AD for user authentication. Using (ad.properties) I am able to bind to AD, however test login is failing with "Invalid credentials" --- FINEST: message = 80090308: LdapErr: DSID-0C090400, comment: AcceptSecurityContext error, data 52e, v1db1 API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='abc.internal' result=CREDENTIALS_INCORRECT SEVERE Authn.Result code is: CREDENTIALS_INCORRECT --- Users credentials is correct.

2 1