July 2018 - Users - oVirt List Archives

VM Portal
by carl langlois 26 Jul '18

26 Jul '18

Hi, I know thta the VM portal add issue with displaying user VMs. It seem to be fix with this bug *https://bugzilla.redhat.com/show_bug.cgi?id=148087 <https://bugzilla.redhat.com/show_bug.cgi?id=148087>* But if i try the portal does not show anything, My engine is up to date with 4.2 repo. It this still a issue? Thanks

2 3

can't connect to spice console
by Deekshith 26 Jul '18

26 Jul '18

Regards Deekshith

1 0

Switching from Public Network to Private Network Space
by Sakhi Hadebe 26 Jul '18

26 Jul '18

Hi, We have installed oVirtNode-4.2.4 in 3 host machines and is running fine. All the hosts machines and the engine are on Public IP address space 15x.xxx.xx.xx Host1 15x.xxx.xx.xx Host2 15x.xxx.xx.xx Host3 15x.xxx.xx.xx Engine VM We wanna move the cluster nodes and the engine VM to the privaye IP address space and access them through VPN. Besides the network interfaces files, which other files can we change for a smooth transition to private IP address space Below is the current network setup on the host machines: bond0.20 - VLAN for the public bridge bond0.20 - VLAN for ovirtmgmt brigde bond0.22 - VLAN for storage briidge ovirtmgmt bridge interface: [root@host2 network-scripts]# cat ifcfg-ovirtmgmt # Generated by VDSM version 4.20.32-1.el7 DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes IPADDR=15x.xxx.xx.xx NETMASK=255.xxx.xxx.xxx BOOTPROTO=none MTU=9000 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=yes IPV6_AUTOCONF=yes [root@host2 ~]# ifconfig bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 4051316 bytes 1013145487 (966.2 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 14031524 bytes 17967035125 (16.7 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond0.20: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 3836861 bytes 912581782 (870.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3183802 bytes 17125114804 (15.9 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond0.22: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::a9e:1ff:fe87:cae1 prefixlen 64 scopeid 0x20<link> ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8 bytes 648 (648.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 em1: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 2591947 bytes 739574288 (705.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 9112112 bytes 11340058277 (10.5 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 em2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST> mtu 1500 ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 1459369 bytes 273571199 (260.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4919412 bytes 6626976848 (6.1 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 genev_sys_6081: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 65000 inet6 fe80::3807:70ff:feb3:15d1 prefixlen 64 scopeid 0x20<link> ether 3a:07:70:b3:15:d1 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 8 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 11464303 bytes 90848049840 (84.6 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11464303 bytes 90848049840 (84.6 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ovirtmgmt: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 15x.xxx.xx.xx netmask 255.255.255.240 broadcast 15x.xxx.xx.xx inet6 fe80::a9e:1ff:fe87:cae1 prefixlen 64 scopeid 0x20<link> ether 08:9e:01:87:ca:e1 txqueuelen 1000 (Ethernet) RX packets 4050802 bytes 916285919 (873.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2955965 bytes 17099409954 (15.9 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 p2p1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 90:e2:ba:3d:90:f4 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 p2p2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 90:e2:ba:3d:90:f5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.124.1 netmask 255.255.255.0 broadcast 192.168.124.255 ether 52:54:00:bd:16:db txqueuelen 1000 (Ethernet) RX packets 5260 bytes 3927233 (3.7 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 5590 bytes 3342473 (3.1 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::fc16:3eff:fe05:44 prefixlen 64 scopeid 0x20<link> ether fe:16:3e:05:00:44 txqueuelen 1000 (Ethernet) RX packets 8952 bytes 17748713 (16.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 14842 bytes 4166526 (3.9 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 -- Regards, Sakhi Hadebe Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za>

1 0

Hosted Engine Deploy kernel panics on boot
by Karli Sjöberg 26 Jul '18

26 Jul '18

Hey all! I'm trying to deploy Hosted Engine through the Cockpit UI and it's going well until it's time to start the local VM and it kernel panics: [ 2.032053] Call Trace: [ 2.032053] [<ffffffffb687e78c>] load_elf_binary+0x33c/0xe50 [ 2.032053] [<ffffffffb68f3919>] ? ima_bprm_check+0x49/0x50 [ 2.032053] [<ffffffffb687e450>] ? load_elf_library+0x220/0x220 [ 2.032053] [<ffffffffb682236f>] search_binary_handler+0xef/0x310 [ 2.032053] [<ffffffffb6823b4b>] do_execve_common.isra.24+0x5db/0x6e0 [ 2.032053] [<ffffffffb6823c68>] do_execve+0x18/0x20 [ 2.032053] [<ffffffffb66afc1f>] ____call_usermodehelper+0xff/0x140 [ 2.032053] [<ffffffffb66afb20>] ? call_usermodehelper+0x60/0x60 [ 2.032053] [<ffffffffb6d20677>] ret_from_fork_nospec_begin+0x21/0x21 [ 2.032053] [<ffffffffb66afb20>] ? call_usermodehelper+0x60/0x60 [ 2.032053] Code: cf e9 ff 4c 89 f7 e8 7b 32 e7 ff e9 4d fa ff ff 65 8b 05 03 a0 7e 49 a8 01 0f 84 85 fc ff ff 31 d2 b8 01 00 00 00 b9 49 00 00 00 <0f> 30 0f 1f 44 00 00 48 c7 c0 10 00 00 00 e8 07 00 00 00 f3 90 [ 2.032053] RIP [<ffffffffb6823025>] flush_old_exec+0x725/0x980 [ 2.032053] RSP <ffff8add75ecbd00> [ 2.298131] ---[ end trace 354b4039b6fb0889 ]--- [ 2.303914] Kernel panic - not syncing: Fatal exception [ 2.304835] Kernel Offset: 0x35600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) I've never had this problem so I'd just want to know if it's a known issue right now or if I've done anything special to deserve this:) The "Hosts" I'm deploying this on are VMs with nested virt activated, and I've done this before but this time around it's bombing, as earlier explained. Thanks in advance! /K

2 7

Re: Failed to Run VM on host (self hosted engine)
by Deekshith 26 Jul '18

26 Jul '18

Dear Team I have reinstalled the OS and tried issue is same unable to launch the VM, I don’t have any SAN or any storages it’s all in Local . Please help me to resolve the issue My server details Lenovo x3650 M5 , Deekshith

4 28

Q: Power failure - proper data center shutdown procedure
by Andrei Verovski 26 Jul '18

26 Jul '18

Hi, I have the following simple setup: oVirt engine - 4.2.3 (running as KVM appliance on SuSE Linux) node1.1 - 4.2.1 (installed with clean CentOS and newer elrepo 4.15.4-1el1 kernel) node1.2 - 4.2.3 (installed with clean CentOS and newer elrepo 4.16.2-1el7 kernel) VMs - Debian, CentOS, and Windows guests, with ovirt-agent installed (except one with Linux telephony software). What is the proper shutdown procedure in case of power failure? I have simple scripts which simply run “shutdown now” on each host after 10 min. However, oVirt nodes fail to shutdown properly, process take about 25 minutes. node1.2 libvirt-guests.sh[10696]: Waiting for guest GUEST_VM_NAME to shut down node1.1 - these processes took VERY LONG time: Unmounting /rhev/data-center/mnt/node11.mydomain.com:_vm_raid_nfs_export… Unmounting /rhev/data-center/mnt/node12.mydomain.com:_vm_raid_nfs_disks… Unmounting /rhev/data-center/mnt/node11.mydomain.com:_vm_raid_nfs_disks… Unmounting /rhev/data-center/mnt/node11.mydomain.com:_vm_raid_nfs_iso… on both nodes: [] Forcibly powering off: job timed out as result, OS is down, server is not, still drawing power from UPS battery. Powering on was problematic, I had to restart node11 2nd time before it becomes “green” in oVirt engine. One VM failed to start with error message “Can’t acquire ticket” and struck with grey arrows (with no possibilty to make anything) - unfortunately, I forgot to take screenshot or record exact message. Restarting node1.1 cured that problem. Q: what is proper oVirt data center automatic shutdown procedure? Thanks in advance Andrei

1 0

Uncaught exception occurred - NS_ERROR_FILE_CORRUPTED
by Michael Seidel 26 Jul '18

26 Jul '18

Hi, I am running oVirt in version 4.2 and just started getting this error message upon login: Uncaught exception occurred. Please try reloading the page. Details: (NS_ERROR_FILE_CORRUPTED) : Please have your administrator check the UI logs The relevant content of the ui.log is given below (or, nicely formatted at https://paste.ee/p/LUrbt) I am able to access the js file directly using a browser so the file is definitely not missing and is readable. However, the side-bar of the ovirt webadmin is not showing (or more precisely: it loads and shows for a split-second and then disappears). The Web Console shows a similar error message as the one below, referring to the same js file and in addition says: Tue Jul 24 14:28:03 GMT+200 2018 com.gwtplatform.mvp.client.presenter.slots.LegacySlotConvertor SEVERE: Warning: You're using an untyped slot! Untyped slots are dangerous! Please upgrade your slots using the Arcbee's easy upgrade tool at https://arcbees.github.io/gwtp-slot-upgrader The github-URL however is not working. I also upgraded and rebooted the ovirt engine, but the error remains. Do you have any suggestions what might cause this issue and how I can fix it. Best, - Michael 2018-07-24 14:19:24,582+02 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-1) [] Permutation name: 2029DD69C3B3D95611AAF9AC05D7EF9B 2018-07-24 14:19:24,582+02 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-1) [] Uncaught exception: com.google.gwt.core.client.JavaScriptException: (NS_ERROR_FILE_CORRUPTED) : at Unknown.loadFromLocalStorage(https://XXXXX/ovirt-engine/webadmin/theme/00-ovirt.brand/patternfly-functions-vertical-nav-custom-3.26.1.js) at Unknown.init(https:/XXXXX/ovirt-engine/webadmin/theme/00-ovirt.brand/patternfly-functions-vertical-nav-custom-3.26.1.js) at Unknown.fn.setupVerticalNavigation(https://XXXXX/ovirt-engine/webadmin/theme/00-ovirt.brand/patternfly-functions-vertical-nav-custom-3.26.1.js) at org.ovirt.engine.ui.webadmin.section.main.view.MainSectionView$lambda$0$Type.execute(MainSectionView.java:45) at com.google.gwt.core.client.impl.SchedulerImpl.runScheduledTasks(SchedulerImpl.java:167) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl.$flushPostEventPumpCommands(SchedulerImpl.java:338) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl$Flusher.execute(SchedulerImpl.java:76) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl.execute(SchedulerImpl.java:140) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.apply(Impl.java:236) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:275) [gwt-servlet.jar:] at Unknown.Ju/<(https://XXXXX/ovirt-engine/webadmin/?locale=en_US) at Unknown.d(https://XXXXX/ovirt-engine/webadmin/?locale=en_US) at Unknown.anonymous(Unknown) Helmholtz Zentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt (GmbH) Ingolstaedter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir'in Baerbel Brumme-Bothe Geschaeftsfuehrer: Prof. Dr. Guenther Wess, Heinrich Bassler, Dr. Alfons Enhsen Registergericht: Amtsgericht Muenchen HRB 6466 USt-IdNr: DE 129521671

1 1

Self hosted to bare metal engine
by Christophe TREFOIS 25 Jul '18

25 Jul '18

Hi, What would be the process to go from self hosted engine to bare metal engine? (Actually it would move to a VM in a VMware cluster) All user guides I found are from bare metal to self hosted. Thanks for any tips or pointers Christophe Sent from my iPhone

2 3

Cannot switch to maintenance, image transfer is in progress
by Randy Bender 25 Jul '18

25 Jul '18

We've just updated our hosted engine to 4.2.4. When trying to place one of the hosts in maintenance mode, we get the error in the subject line. I've found the following that looks to be the issue we are hitting: https://bugzilla.redhat.com/show_bug.cgi?id=1586126 I've looked in the engine database with the following command and results: engine=# select disk_id from image_transfers ; disk_id -------------------------------------- 52966b71-2d01-4a16-9830-65a888717656 c72d64b7-93c9-485b-b031-29c785c5bf9a (2 rows) Full details on these records show that they are indeed old - there are no transfers actually in progress. Can anyone confirm the correct way to remedy this? The bug report notes changing the phase on the record in question. Before I try that, I'd like confirmation if anyone else has seen this issue and resolved it. And if this is the resolution, can you describe the exact psql commands to achieve this? Thanks

3 3

Freshly installed ovirt-node-ng 4.2.4 unable to deploy hosted-engine
by Ralf Schenk 25 Jul '18

25 Jul '18

Hello List, after having freshly installed my first ovirt-node-ng 4.2.4 configuring basic networking and preparing NFS Shares on my NFS-Server I would like to deploy hosted engine on this first host and NFS Storage. In Cockpit I set Performance Profile to "virtual host" and mounted an export from my Sotrage as /mnt/engine (Which shouldn't be needed since I expected the engine-setup wizard to ask me...) I'm, already stuck when selecting "Hosted Engine Deploy oVirt hosted engine on storage that has already been provisioned": save image "hosted-engine-setup" on the command-line is not available. Furthermore I've warnings in Node Health Status. I didn't configure discard anywhere. It is used as it was set up by the installer on the logical volumes residing on a SATA Disk. save image save image -- *Ralf Schenk* fon +49 (0) 24 05 / 40 83 70 fax +49 (0) 24 05 / 40 83 759 mail *rs(a)databay.de* <mailto:rs@databay.de> *Databay AG* Jens-Otto-Krag-Straße 11 D-52146 Würselen *www.databay.de* <http://www.databay.de> Sitz/Amtsgericht Aachen • HRB:8437 • USt-IdNr.: DE 210844202 Vorstand: Ralf Schenk, Dipl.-Ing. Jens Conze, Aresch Yavari, Dipl.-Kfm. Philipp Hermanns Aufsichtsratsvorsitzender: Wilhelm Dohmen ------------------------------------------------------------------------

3 2

interface up when not used
by Fabrice Bacchella 25 Jul '18

25 Jul '18

To monitoring the network interfaces, I have a script that check if ifAdminStatus and ifOperStatus values matches in snmp. But with oVirt it fails on a server with 4 physical interfaces, but only two connected, and return an error: snmptable XXX IF-MIB::ifTable | less SNMP table: IF-MIB::ifTable ifIndex ifDescr ifAdminStatus ifOperStatus 1 lo up up 2 eth0 up up 3 eth1 up up 4 eth2 up down 5 eth3 up down 24 ;vdsmdummy; down down 25 vnet0 up up And indeed on the server: ip link show eth2 4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether 40:a8:f0:30:81:1a brd ff:ff:ff:ff:ff:ff It's up, but I don't configured it on oVirt, removed ifcg-eth2. Is there a way to disable it ?

3 5

Sync LDAP users in Ovirt
by Hari Prasanth Loganathan 25 Jul '18

25 Jul '18

Hi Team, Good Morning. I configured the ovirt with LDAP setup. Is there an *oVirt tool* (or any way) to add all the users from LDAP to Ovirt? *Observation* : 1) I am able to see that when I try to login with the user from LDAP, that user is added in Ovirt database, So Is there a way to sync all the users from LDAP to Ovirt using any oVirt tool or API? Any help is much appreciated. Thanks, Hari -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

3 11

Raid configuration for single instance
by Leo David 25 Jul '18

25 Jul '18

Hello everyone, Based on your experiance or well know best practices can you provide me with an advice on raid configuration ? I have a single server, that will have a couple of brand new enterprise grade ssds, spinning and one pci nvme card. The server ( Dell PE r630 ) comes wirt Perc h730p raid controller with 2gb cache. I am thinking of creating a raid 1 array with the 2 of ssd's and ne raid10 array woth the rest of for spinning hdds. Then different gluster volume on each, to provide me 2 ( ssd / sata ) storage domains. What do you think on haveing raid1 / raid10 as underlying HA storage for gluster volumes ? At the moment a have some consumer devices ( samsung evo & seagate spinning shingled type ) and about every day the vms get into "VM has been paused due to storage IO errors" - i am thinking because of bad type hdds. Any thoughts on these ? Thank you , Leo -- Best regards, Leo David

3 5

Deleting master storage
by jin&hitman&Barracuda 25 Jul '18

25 Jul '18

Hi, Trying to build an ovirt system and i'm stuck with storage problem. I've prepared iscsi storage and seems like my storage had some troubles and now i could not get it online again. That is another story. I just want to delete master storage domain on ovirt manager. Looks like this is not allowed since there is no storage domain candidate to take master role. Also i could not add another storage domain becouse that is not allowed too. It says "can not add because there is no active storage domain" or something similar. Basically i'm stuck and don't know how to delete storage domain (master) without tear down all of them.

2 2

Backup Strategies
by Markus Schaufler 25 Jul '18

25 Jul '18

Hi! We use in our test infrastructure a NetApp shared fc storage and wonder how a backup strategie could look like. Full backups aren't the problem - trigger HV Snapshots including guest FS freeze / quiece, trigger NetApp Snapshot, delete HV Snapshots. Currently I'm struggeling on how to recover those Backups. I would provide the Snapshot volume to the hosts and import it as a new data domain, so the hosts have the snapshot disks as logical volumes. But how could I recover respectively move the content of the snapshot volumes onto the currently used vm "disk volumes"? If I have the proof of concept then scripting it to make this process more comfortable wouldn't be a problem. How do you do your backups with shared san? How can I provide incremental Backups? Thanks for any help!

1 0

metrics
by suporte＠logicworks.pt 24 Jul '18

24 Jul '18

Hi, I'm trying to configure oVirt metrics but when i run # ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/ansible-inventory-origin-39-aio playbooks/deploy_cluster.yml i always get this error: Failure summary: 1. Hosts: localhost Play: Verify Requirements Task: Validate openshift_node_groups and openshift_node_group_name Message: last_checked_host: localhost, last_checked_var: openshift_node_group_name;openshift_node_group_name must be defined for all nodes What am I missing here? Thanks -- Jose Ferradeira http://www.logicworks.pt

3 14

[ANN] oVirt 4.2.5 Third Release Candidate is now available
by Lev Veyde 24 Jul '18

24 Jul '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.5 Third Release Candidate, as of July 24th, 2018. This update is a release candidate of the fifth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.5 release highlights: http://www.ovirt.org/release/4.2.5/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.5/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Re: Failed to Run VM on host (self hosted engine)
by Deekshith 24 Jul '18

24 Jul '18

Dear Team I one more time reinstalled host and installed overt engine 4.0 ,now I showing white screen on browser From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 24 July 2018 11:47 To: 'Greg Sheremeta'; 'ebenahar(a)redhat.com'; 'talayan(a)redhat.com'; 'ravishankar(a)redhat.com'; 'dchaplyg(a)redhat.com'; 'alukiano(a)redhat.com' Cc: 'Roy Golan'; 'devel'; 'users'; 'girishrs(a)binaryindia.com'; 'IT Support Mangalore' Subject: Failed to Run VM on host (self hosted engine) Dear team It is a new installation , everything is ok but vm is not coming up , please help me out solve this issue. Regards Deekshith 9964507515,9481707515 From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 23 July 2018 05:34 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Please run these commands, and attach the output ls -lhZ $(realpath /rhev/data-center/mnt/_ovirt_DATA) ausearch -m avc -ts this-week On Mon, Jul 23, 2018 at 7:44 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear Team This is the error , please help me to resolve the issue. Regards Deekshith From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 23 July 2018 11:41 To: 'Greg Sheremeta' Cc: 'Roy Golan'; 'devel'; 'users' Subject: RE: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Dear team Please find the attached KVM error file. Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 22 July 2018 06:09 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils It appears you have permission issues on your storage. I see you are using storageType='LOCALFS' per https://www.ovirt.org/documentation/admin-guide/chap-Storage/ "Ensure that the directory has permissions allowing read/write access to the vdsm user (UID 36) and kvm group (GID 36)." Can you verify that? 2018-07-20 12:10:33,757+0530 ERROR (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') The vm start process failed (vm:943) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2876, in _run dom.createWithFlags(flags) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirtError: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799 c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408 d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d- b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied 2018-07-20 12:10:33,757+0530 INFO (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') Changed state to Down: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied (code=1) (vm:1683) On Fri, Jul 20, 2018 at 6:00 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear Team Please find attached Log files , Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 07 July 2018 03:58 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Hi, Please attach logs -- engine.log and vdsm.log at least. Any others where you see errors, too. Best wishes, Greg On Sat, Jul 7, 2018 at 1:59 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team I have clean the os and installed 4.2 ovirt engine , host, datacenter ,data domain, all are up but vm is not coming up .please help me to resolve the issue. Regards Deekshith From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 02 July 2018 04:54 To: 'Roy Golan' Cc: 'Greg Sheremeta'; 'devel'; 'users' Subject: RE: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Hi team Can i have some best practice self hosted engine setup guide . i am cleaning up the os (fresh installation ) and give me some backup tips for future corruption issues. Server model : Lenovo 3650 m5 Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 26 June 2018 12:42 To: Deekshith Cc: Greg Sheremeta; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 26 Jun 2018 at 09:47 Deekshith <deekshith(a)binaryindia.com> wrote: What about data if i cleanup the OS ? See here https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/ If you want to avoid the backup/restore you can try reinstalling some of the packages: yum reinstall ovirt-engine-wildfly and run engine-setup. Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 26 June 2018 12:14 To: Deekshith Cc: Greg Sheremeta; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 26 Jun 2018 at 07:23 Deekshith <deekshith(a)binaryindia.com> wrote: Hi team It was installed 1 year back , 10 days before we were not able to take the console and webadmin of the server, it was working only 10 minutes once manually restart the server, so I tried refreshing the engine (engine cleanup)but same issue ,so I upgraded my centos 7.2 to 7.4 then i got webadmin and console of the server ,now my first problem is resolved ...but host is not coming up.... I recommend you do an engine-backup, clean up the os (yum update, ensure proper ovirt repo for you version) and do engine-setup and restore. Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 25 June 2018 06:49 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users; allentvpm(a)gmail.com Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is this a fresh install or an upgrade to 4.1? On Mon, Jun 25, 2018 at 3:41 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Engine version is 4.1 and I am able to take the console and webadmin from the browser. All the vm data is available in the host . But host is not coming up. I upgrade from the NET( YUM UPDATE) all the necessary packages downloaded .. let me know if any log files needed. Please help me to resolve the issue . Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 22 June 2018 03:22 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users; allen_john(a)mrpl.co.in Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is your engine functioning at all? I'm not sure if you're saying your entire engine doesn't work, or just host deploy doesn't work. What version of ovirt engine is this? How did you install -- fresh installation, upgrade? From source or rpm? Best wishes, Greg On Wed, Jun 20, 2018 at 12:35 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Please find the attached server and host logs.. ovirt host unresponsive(down), unable to install node packages. Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 19 June 2018 06:57 To: Greg Sheremeta Cc: devel; users; deekshith(a)binaryindia.com; allen_john(a)mrpl.co.in Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 19 Jun 2018 at 16:04 Greg Sheremeta <gshereme(a)redhat.com> wrote: Sending to devel list. Anyone ever seen this before? It sounds like a bad installation if Java classes are missing / classloader issues are present. 2018-06-18 11:23:11,287+05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Correlation ID: d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Installing Host Node. Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-20180618112311-mrpl.kvm2-d6a2578b-c58f-43be-b6ad-30a3a0a57a74.log'. 2018-06-18 11:23:12,131+05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Correlation ID: d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Installing Host Node. Stage: Termination. 2018-06-18 11:23:12,193+05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to mrpl.kvm2/172.31.1.32 2018-06-18 11:23:12,206+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils 2018-06-18 11:23:12,206+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Command 'PollVDSCommand(HostName = Node, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='d862d5c8-c75e-42ee-867f-ca16a228c2ad'})' execution failed: java.util.concurrent.ExecutionException: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils 2018-06-18 11:23:12,707+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is that a regular installation and what version? jdk version? server.log engine.log On Tue, Jun 19, 2018 at 8:50 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Please find attached ovirt-engine log . Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 19 June 2018 05:53 To: deekshith(a)binaryindia.com Cc: users Subject: Re: [ovirt-users] Unable to start Ovirt engine What does it say in the /var/log/ovirt-engine/setup/ovirt-engine-setup-xxxxxx.log? On Sun, Jun 17, 2018 at 6:01 AM Deekshith <deekshith(a)binaryindia.com> wrote: Hi Team Please anyone help me to solve this issue. 1. Error! Filename not specified. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QPBXKHLK4NSU6… -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AA4B5IPQL7O2… -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

2 1

Xen Free Edition migration to oVirt
by Sandro Bonazzola 24 Jul '18

24 Jul '18

Hi, If you were using Xen Free Edition or if you are still using it, after https://xenserver.org/blog/entry/xenserver-7-3-changes-to-the-free-edition.… you may be looking at oVirt as alternative. A community tool to ease the migration exist here: https://github.com/zipurman/oVIRT_Simple_Backup. Did you migrate to oVirt or are you planning it? I was wondering if it may help organizing an hackathon day for helping users doing the migration would make sense, so I'd like to know if there are users looking for assistance in the migration process. Let us know! -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

2 1

How to keep VM running when a storage domain is offline
by Matthew B 24 Jul '18

24 Jul '18

Hello, I am trying to understand how I can prevent a VM from being paused when one of it's disks is unavailable due to a problem with the storage domain. The scenario: A VM with 3 disks. OS disk on a highly available domain. And Two large disks each on separate domains. (so a total of 3 domains). The two large disks are mirrored using ZFS - but when one of the storage domains goes down the VM pauses. Is is possible to configure the VM to not pause when certain storage domains are unavailable? So instead of getting Paused due to IO error the disk would just be missing until that domain was brought back online? Thanks, -Matthew

3 2

Re: PRODECDURE DOCUMENTATION: Mounting GPFS as STORAGE DOMAIN
by Nir Soffer 24 Jul '18

24 Jul '18

On Mon, Jul 23, 2018 at 4:51 PM Jose E Torres <jtorres(a)bsc.es> wrote: > Recently I opened a thread on ovirt-users-list to ask about how can I > mount GPFS as a Storage Domain, and after a few tries I finally mounted it > correctly. > > On the last comment you ask me to document the procedure: > I asked to file a bug for documenting it. > >> Thanks for the info! > >> Can you file oVirt bug to document this procedure? > > I don't know how to do it exactly, please, can you give me indications to > do that? Im ready for collaborate on what I can. > Sorry for not being clear. You can open a bug here: https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine Daniel, is ovirt-engine the best place for this bug, or we have a better place? Component: Documentation oVirt team: Docs In the description: - describe the user visible issue - describe the root cause (missing mount option?) - describe the solution - suggest where this solution should be documented in the manual - link to the discussion on users list The thread is: > https://lists.ovirt.org/archives/list/users@ovirt.org/thread/LLXLSI4ZQFU32P… > > Thanks in advance an sorry if this is not the correct channel to ask this > type of questions. > I think it is better to ask on the mailing list. You may get a faster response, and others may benefit from the discussion. Thanks for your contribution! Nir

1 0

Error when change CD
by markus.schaufler＠ooe.gv.at 24 Jul '18

24 Jul '18

Hi! I created an NFS ISO Domain but couldn't find any upload button. Because uploading ISO files on the Data Domain I went that comfortable way. I successfully started Installation of Windows Server 2016 until the virtio Drivers for the disk are needed. So I tried to Change CD but following error occured: "Error while executing Action Change CD: Drive Image file could not be found" Changing CD works when using another ISO file like Centos. The iso itself is good - I can read it on my own System - but anyhow I tried another download of the virtio-win-iso - with the same result. I already found several threads around this Topic - e.g. "do not upload ISO files to data Domain" So I'd like to know how the upload to the ISO Domain is supposed to work if there's no "upload" button? Directly via SCP into the subfolders? Did I miss some configuration or is the workflow in uploading ISO's respectively in installing a Windows VM wrong? Thanks for any help!

3 2

vGPU question
by femi adegoke 24 Jul '18

24 Jul '18

Planning to build a hyperconverged 3 host w HE oVirt cluster + Gluster. Is it ok if only one of the hosts has a GPU?

2 1

Is enabling Epel repo will break the installation?
by Arman Khalatyan 24 Jul '18

24 Jul '18

Hello, As I remember some time ago the epel collectd was in conflict with the ovirt one. Is it still the case? Thanks, Arman.

3 3

Ovirt4.2 AD integration issue
by Arun S 24 Jul '18

24 Jul '18

Hello, I need help to resolve Ovirt AD auth setup issue. I have setup ovirt-engine-4.2 and I am trying to integrate with AD for user authentication. Using (ad.properties) I am able to bind to AD, however test login is failing with "Invalid credentials" --- FINEST: message = 80090308: LdapErr: DSID-0C090400, comment: AcceptSecurityContext error, data 52e, v1db1 API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='abc.internal' result=CREDENTIALS_INCORRECT SEVERE Authn.Result code is: CREDENTIALS_INCORRECT --- Users credentials is correct.

2 1

Failed to Run VM on host (self hosted engine)
by Deekshith 24 Jul '18

24 Jul '18

Dear team It is a new installation , everything is ok but vm is not coming up , please help me out solve this issue. Regards Deekshith 9964507515,9481707515 From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 23 July 2018 05:34 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Please run these commands, and attach the output ls -lhZ $(realpath /rhev/data-center/mnt/_ovirt_DATA) ausearch -m avc -ts this-week On Mon, Jul 23, 2018 at 7:44 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear Team This is the error , please help me to resolve the issue. Regards Deekshith From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 23 July 2018 11:41 To: 'Greg Sheremeta' Cc: 'Roy Golan'; 'devel'; 'users' Subject: RE: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Dear team Please find the attached KVM error file. Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 22 July 2018 06:09 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils It appears you have permission issues on your storage. I see you are using storageType='LOCALFS' per https://www.ovirt.org/documentation/admin-guide/chap-Storage/ "Ensure that the directory has permissions allowing read/write access to the vdsm user (UID 36) and kvm group (GID 36)." Can you verify that? 2018-07-20 12:10:33,757+0530 ERROR (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') The vm start process failed (vm:943) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2876, in _run dom.createWithFlags(flags) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirtError: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799 c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408 d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d- b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied 2018-07-20 12:10:33,757+0530 INFO (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') Changed state to Down: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied (code=1) (vm:1683) On Fri, Jul 20, 2018 at 6:00 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear Team Please find attached Log files , Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 07 July 2018 03:58 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Hi, Please attach logs -- engine.log and vdsm.log at least. Any others where you see errors, too. Best wishes, Greg On Sat, Jul 7, 2018 at 1:59 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team I have clean the os and installed 4.2 ovirt engine , host, datacenter ,data domain, all are up but vm is not coming up .please help me to resolve the issue. Regards Deekshith From: Deekshith [mailto:deekshith@binaryindia.com] Sent: 02 July 2018 04:54 To: 'Roy Golan' Cc: 'Greg Sheremeta'; 'devel'; 'users' Subject: RE: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Hi team Can i have some best practice self hosted engine setup guide . i am cleaning up the os (fresh installation ) and give me some backup tips for future corruption issues. Server model : Lenovo 3650 m5 Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 26 June 2018 12:42 To: Deekshith Cc: Greg Sheremeta; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 26 Jun 2018 at 09:47 Deekshith <deekshith(a)binaryindia.com> wrote: What about data if i cleanup the OS ? See here https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/ If you want to avoid the backup/restore you can try reinstalling some of the packages: yum reinstall ovirt-engine-wildfly and run engine-setup. Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 26 June 2018 12:14 To: Deekshith Cc: Greg Sheremeta; devel; users Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 26 Jun 2018 at 07:23 Deekshith <deekshith(a)binaryindia.com> wrote: Hi team It was installed 1 year back , 10 days before we were not able to take the console and webadmin of the server, it was working only 10 minutes once manually restart the server, so I tried refreshing the engine (engine cleanup)but same issue ,so I upgraded my centos 7.2 to 7.4 then i got webadmin and console of the server ,now my first problem is resolved ...but host is not coming up.... I recommend you do an engine-backup, clean up the os (yum update, ensure proper ovirt repo for you version) and do engine-setup and restore. Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 25 June 2018 06:49 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users; allentvpm(a)gmail.com Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is this a fresh install or an upgrade to 4.1? On Mon, Jun 25, 2018 at 3:41 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Engine version is 4.1 and I am able to take the console and webadmin from the browser. All the vm data is available in the host . But host is not coming up. I upgrade from the NET( YUM UPDATE) all the necessary packages downloaded .. let me know if any log files needed. Please help me to resolve the issue . Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 22 June 2018 03:22 To: deekshith(a)binaryindia.com Cc: Roy Golan; devel; users; allen_john(a)mrpl.co.in Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is your engine functioning at all? I'm not sure if you're saying your entire engine doesn't work, or just host deploy doesn't work. What version of ovirt engine is this? How did you install -- fresh installation, upgrade? From source or rpm? Best wishes, Greg On Wed, Jun 20, 2018 at 12:35 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Please find the attached server and host logs.. ovirt host unresponsive(down), unable to install node packages. Regards Deekshith From: Roy Golan [mailto:rgolan@redhat.com] Sent: 19 June 2018 06:57 To: Greg Sheremeta Cc: devel; users; deekshith(a)binaryindia.com; allen_john(a)mrpl.co.in Subject: Re: [ovirt-users] PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils On Tue, 19 Jun 2018 at 16:04 Greg Sheremeta <gshereme(a)redhat.com> wrote: Sending to devel list. Anyone ever seen this before? It sounds like a bad installation if Java classes are missing / classloader issues are present. 2018-06-18 11:23:11,287+05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Correlation ID: d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Installing Host Node. Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-20180618112311-mrpl.kvm2-d6a2578b-c58f-43be-b6ad-30a3a0a57a74.log'. 2018-06-18 11:23:12,131+05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Correlation ID: d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Installing Host Node. Stage: Termination. 2018-06-18 11:23:12,193+05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to mrpl.kvm2/172.31.1.32 2018-06-18 11:23:12,206+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils 2018-06-18 11:23:12,206+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Command 'PollVDSCommand(HostName = Node, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='d862d5c8-c75e-42ee-867f-ca16a228c2ad'})' execution failed: java.util.concurrent.ExecutionException: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils 2018-06-18 11:23:12,707+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils Is that a regular installation and what version? jdk version? server.log engine.log On Tue, Jun 19, 2018 at 8:50 AM Deekshith <deekshith(a)binaryindia.com> wrote: Dear team Please find attached ovirt-engine log . Regards Deekshith From: Greg Sheremeta [mailto:gshereme@redhat.com] Sent: 19 June 2018 05:53 To: deekshith(a)binaryindia.com Cc: users Subject: Re: [ovirt-users] Unable to start Ovirt engine What does it say in the /var/log/ovirt-engine/setup/ovirt-engine-setup-xxxxxx.log? On Sun, Jun 17, 2018 at 6:01 AM Deekshith <deekshith(a)binaryindia.com> wrote: Hi Team Please anyone help me to solve this issue. 1. Error! Filename not specified. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QPBXKHLK4NSU6… -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AA4B5IPQL7O2… -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig> -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX <https://www.redhat.com/> Red Hat NA <mailto:gshereme@redhat.com> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

1 0

Re: PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils
by Greg Sheremeta 24 Jul '18

24 Jul '18

It appears you have permission issues on your storage. I see you are using storageType='LOCALFS' per https://www.ovirt.org/documentation/admin-guide/chap-Storage/ "Ensure that the directory has permissions allowing read/write access to the vdsm user (UID 36) and kvm group (GID 36)." Can you verify that? 2018-07-20 12:10:33,757+0530 ERROR (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') The vm start process failed (vm:943) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2876, in _run dom.createWithFlags(flags) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirtError: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799 c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408 d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: *Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-* *b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied* 2018-07-20 12:10:33,757+0530 INFO (vm/d17c1f11) [virt.vm] (vmId='d17c1f11-be8a-4d39-87e7-b1d556bf16db') Changed state to Down: internal error: qemu unexpectedly closed the monitor: 2018-07-20T06:40:33.426085Z qemu-kvm: -drive file=/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4,format=raw,if=none,id=drive-ua-df54fef1-e9b7-408d-b3c6-e500b54cb062,serial=df54fef1-e9b7-408d-b3c6-e500b54cb062,cache=none,werror=stop,rerror=stop,aio=threads: *Could not open '/rhev/data-center/mnt/_ovirt_DATA/33fbb2b7-8954-4b53-aa11-bb799c7af737/images/df54fef1-e9b7-408d-b3c6-e500b54cb062/cf08a216-edf0-4a1b-a8b7-0ef6f22804f4': Permission denied (code=1) (vm:1683)* On Fri, Jul 20, 2018 at 6:00 AM Deekshith <deekshith(a)binaryindia.com> wrote: > Dear Team > > Please find attached Log files , > > > > Deekshith > > > > > > > > *From:* Greg Sheremeta [mailto:gshereme@redhat.com] > *Sent:* 07 July 2018 03:58 > *To:* deekshith(a)binaryindia.com > *Cc:* Roy Golan; devel; users > *Subject:* Re: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > Hi, > > > > Please attach logs -- engine.log and vdsm.log at least. Any others where > you see errors, too. > > > > Best wishes, > > Greg > > > > On Sat, Jul 7, 2018 at 1:59 AM Deekshith <deekshith(a)binaryindia.com> > wrote: > > Dear team > > I have clean the os and installed 4.2 ovirt engine , host, datacenter > ,data domain, all are up but vm is not coming up .please help me to resolve > the issue. > > > > Regards > > Deekshith > > > > > > *From:* Deekshith [mailto:deekshith@binaryindia.com] > *Sent:* 02 July 2018 04:54 > *To:* 'Roy Golan' > *Cc:* 'Greg Sheremeta'; 'devel'; 'users' > *Subject:* RE: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > Hi team > > Can i have some best practice self hosted engine setup guide . i am > cleaning up the os (fresh installation ) and give me some backup tips for > future corruption issues. > > > > Server model : Lenovo 3650 m5 > > > > Regards > > Deekshith > > > > > > > > *From:* Roy Golan [mailto:rgolan@redhat.com] > *Sent:* 26 June 2018 12:42 > *To:* Deekshith > *Cc:* Greg Sheremeta; devel; users > *Subject:* Re: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > > > On Tue, 26 Jun 2018 at 09:47 Deekshith <deekshith(a)binaryindia.com> wrote: > > What about data if i cleanup the OS ? > > > > > > See here > https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/ > > > > If you want to avoid the backup/restore you can try reinstalling some of > the packages: > > yum reinstall ovirt-engine-wildfly > > > > and run engine-setup. > > > > > > Regards > > Deekshith > > > > *From:* Roy Golan [mailto:rgolan@redhat.com] > *Sent:* 26 June 2018 12:14 > *To:* Deekshith > *Cc:* Greg Sheremeta; devel; users > > > *Subject:* Re: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > > > On Tue, 26 Jun 2018 at 07:23 Deekshith <deekshith(a)binaryindia.com> wrote: > > Hi team > > It was installed 1 year back , 10 days before we were not able to take the > console and webadmin of the server, it was working only 10 minutes once > manually restart the server, so I tried refreshing the engine (engine > cleanup)but same issue ,so I upgraded my centos 7.2 to 7.4 then i got > webadmin and console of the server ,now my first problem is resolved ...but > host is not coming up.... > > > > I recommend you do an engine-backup, clean up the os (yum update, ensure > proper ovirt repo for you version) and do engine-setup and restore. > > > > > > > > Regards > > Deekshith > > *From:* Greg Sheremeta [mailto:gshereme@redhat.com] > *Sent:* 25 June 2018 06:49 > *To:* deekshith(a)binaryindia.com > *Cc:* Roy Golan; devel; users; allentvpm(a)gmail.com > > > *Subject:* Re: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > Is this a fresh install or an upgrade to 4.1? > > > > On Mon, Jun 25, 2018 at 3:41 AM Deekshith <deekshith(a)binaryindia.com> > wrote: > > Dear team > > Engine version is 4.1 and I am able to take the console and webadmin from > the browser. All the vm data is available in the host . But host is not > coming up. > > I upgrade from the NET( YUM UPDATE) all the necessary packages downloaded > .. let me know if any log files needed. > > > > Please help me to resolve the issue . > > > > Regards > > Deekshith > > > > > > *From:* Greg Sheremeta [mailto:gshereme@redhat.com] > *Sent:* 22 June 2018 03:22 > *To:* deekshith(a)binaryindia.com > *Cc:* Roy Golan; devel; users; allen_john(a)mrpl.co.in > *Subject:* Re: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > Is your engine functioning at all? I'm not sure if you're saying your > entire engine doesn't work, or just host deploy doesn't work. > > What version of ovirt engine is this? > > How did you install -- fresh installation, upgrade? From source or rpm? > > > > Best wishes, > > Greg > > > > > > On Wed, Jun 20, 2018 at 12:35 AM Deekshith <deekshith(a)binaryindia.com> > wrote: > > Dear team > > Please find the attached server and host logs.. ovirt host > unresponsive(down), unable to install node packages. > > > > Regards > > Deekshith > > > > *From:* Roy Golan [mailto:rgolan@redhat.com] > *Sent:* 19 June 2018 06:57 > *To:* Greg Sheremeta > *Cc:* devel; users; deekshith(a)binaryindia.com; allen_john(a)mrpl.co.in > *Subject:* Re: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > > > On Tue, 19 Jun 2018 at 16:04 Greg Sheremeta <gshereme(a)redhat.com> wrote: > > Sending to devel list. > > > > Anyone ever seen this before? It sounds like a bad installation if Java > classes are missing / classloader issues are present. > > > > 2018-06-18 11:23:11,287+05 INFO > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: > VDS_INSTALL_IN_PROGRESS(509), Correlation ID: > d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, > Custom Event ID: -1, Message: Installing Host Node. Retrieving installation > logs to: > '/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-20180618112311-mrpl.kvm2-d6a2578b-c58f-43be-b6ad-30a3a0a57a74.log'. > > 2018-06-18 11:23:12,131+05 INFO > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: > VDS_INSTALL_IN_PROGRESS(509), Correlation ID: > d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, > Custom Event ID: -1, Message: Installing Host Node. Stage: Termination. > > 2018-06-18 11:23:12,193+05 INFO > [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) > [] Connecting to mrpl.kvm2/172.31.1.32 > > 2018-06-18 11:23:12,206+05 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] > (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] > Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > 2018-06-18 11:23:12,206+05 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] > (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] > Command 'PollVDSCommand(HostName = Node, > VdsIdVDSCommandParametersBase:{runAsync='true', > hostId='d862d5c8-c75e-42ee-867f-ca16a228c2ad'})' execution failed: > java.util.concurrent.ExecutionException: java.lang.NoClassDefFoundError: > org/apache/commons/lang/StringUtils > > 2018-06-18 11:23:12,707+05 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] > (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] > Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > > > Is that a regular installation and what version? > > jdk version? > > server.log engine.log > > > > > > On Tue, Jun 19, 2018 at 8:50 AM Deekshith <deekshith(a)binaryindia.com> > wrote: > > Dear team > > Please find attached ovirt-engine log . > > > > Regards > > Deekshith > > > > *From:* Greg Sheremeta [mailto:gshereme@redhat.com] > *Sent:* 19 June 2018 05:53 > *To:* deekshith(a)binaryindia.com > *Cc:* users > *Subject:* Re: [ovirt-users] Unable to start Ovirt engine > > > > What does it say in the > /var/log/ovirt-engine/setup/ovirt-engine-setup-xxxxxx.log? > > > > On Sun, Jun 17, 2018 at 6:01 AM Deekshith <deekshith(a)binaryindia.com> > wrote: > > Hi Team > > Please anyone help me to solve this issue. > > > > > > 1. *Error! Filename not specified.* > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/QPBXKHLK4NSU6… > > > > > -- > > *GREG SHEREMETA* > > SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX > > Red Hat NA > > <https://www.redhat.com/> > > gshereme(a)redhat.com IRC: gshereme > > <https://red.ht/sig> > > > > > > > -- > > *GREG SHEREMETA* > > SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX > > Red Hat NA > > <https://www.redhat.com/> > > gshereme(a)redhat.com IRC: gshereme > > <https://red.ht/sig> > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AA4B5IPQL7O2… > > > > > -- > > *GREG SHEREMETA* > > SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX > > Red Hat NA > > <https://www.redhat.com/> > > gshereme(a)redhat.com IRC: gshereme > > <https://red.ht/sig> > > > > > > > -- > > *GREG SHEREMETA* > > SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX > > Red Hat NA > > <https://www.redhat.com/> > > gshereme(a)redhat.com IRC: gshereme > > <https://red.ht/sig> > > > > > > > -- > > *GREG SHEREMETA* > > SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX > > Red Hat NA > > <https://www.redhat.com/> > > gshereme(a)redhat.com IRC: gshereme > > <https://red.ht/sig> > > > -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

3 11

Corrupted Disk Images
by Bryan Sockel 23 Jul '18

23 Jul '18

Hi, Over the past few weeks i have had a number of Windows VM Disk start showing up as corrupted. I Attempt to boot into recover mode and run the normal recover tools (chkdsk, sfc /scannow, etc.) Unable to repair with status 50. Looking through Ovirt, i do not see any thing in the logs. VM is Running off a gluster replica 3 volume. The corruption does not seem to be isolated to one specific gluster volume. I have also seen corruption with an NFS Volume. Issue seemed to start after moving from a Centos 7 Install, to a Ovirt Node image. I have mainly seen corruption with Windows 10 Images, but a couple of 2003/2012 server OS's as well. Where would be the best place to start looking at why the VM HD's are getting corrupted? Thank You, Bryan Sockel Systems Administrator o: 817-601-3222 ext: 233 e: bryan.sockel(a)mdaemon.com MDaemon Technologies Simple Secure Email Visit us on Facebook | LinkedIn | YouTube Sent using the MDaemon Messaging Server

2 2

Importing from Remote Virt Server
by Gale Price 23 Jul '18

23 Jul '18

Hi All, I see that this was asked and answered (kinda) here https://lists.ovirt.org/pipermail/users/2016-October/076760.html However, I have imported the keys to my root user on my nodes and my engine. But I am still getting the error in the gui: VDSM ToolsCluster-01 command GetVmsNamesFromExternalProviderVDS failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer At the command line of the engine I can do this as root with a being prompted for a password: virsh -r -c 'qemu+ssh://root@xxx.xxx.xxx.xxx/system' list -all But if I run this as vdsm it prompts me for password and fingerprint verification every time. [root@toolscluster-ovirt ~]# sudo -u vdsm virsh -r -c 'qemu+ssh://root@10.240.75.248/system' list --all The authenticity of host '10.240.75.248 (10.240.75.248)' can't be established. ECDSA key fingerprint is SHA256:Gu2nIWRlBX4LC/q8nNgUFeLDCqv4PvmtfD7/ayUp26Y. ECDSA key fingerprint is MD5:eb:24:5b:10:fc:62:32:a1:7b:ec:bc:00:1d:c8:55:58. Are you sure you want to continue connecting (yes/no)? yes root(a)10.240.75.248's password: I am only *Cough* assuming that vdsm is the user that is doing this from the gui... I am running version 4.2.4.5-1.el7 Any help here would be much appreciated. [http://lenovocentral.lenovo.com/marketing/branding/email_signature/images/g…] Gale (Dean) Price Lead Admin - Remote Services Lab Lab Infrastructure Services & Support 8001 Development Drive Morrisville, NC 27560 Lenovo USA [Phone]Ph: 919-237-8421 [VOIP]297-8421 [Email]gprice(a)lenovo.com<mailto:gprice@lenovo.com> Lenovo.com <http://www.lenovo.com/> Twitter<http://twitter.com/lenovo> | Facebook<http://www.facebook.com/lenovo> | Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> | Forums<http://forums.lenovo.com/> [ImageLogo-Blue]

1 0

yum check-update doesn't show v4.2.4 ovirt upates on system running 4.2.3.5-1.el7 ovirt
by Edward Clay 23 Jul '18

23 Jul '18

Hello, I'm trying to find out what updates are included with the 4.2.4 update and when I run yum check-update there are no ovirt updates available. My running systems shows "4.2.3.5-1.el7.centos". Shouldn't I see a list of 4.2.4.x ovirt patches available? On the ovirt engine system # yum check-update Loaded plugins: fastestmirror, versionlock Loading mirror speeds from cached hostfile * base: mirror.den1.denvercolo.net * epel: mirrors.syringanetworks.net * extras: mirror.den1.denvercolo.net * ovirt-4.2: resources.ovirt.org * ovirt-4.2-epel: mirrors.syringanetworks.net * updates: mirror.den1.denvercolo.net ansible.noarch 2.6.1-1.el7 epel cockpit-dashboard.x86_64 169-1.el7.centos extras cockpit-ws.x86_64 169-1.el7.centos extras collectd.x86_64 5.8.0-6.1.el7 ovirt-4.2-centos-opstools collectd-disk.x86_64 5.8.0-6.1.el7 ovirt-4.2-centos-opstools collectd-postgresql.x86_64 5.8.0-6.1.el7 ovirt-4.2-centos-opstools collectd-write_http.x86_64 5.8.0-6.1.el7 ovirt-4.2-centos-opstools gdeploy.noarch 2.0.8-1.el7 ovirt-4.2-centos-gluster312 glusterfs.x86_64 3.12.11-1.el7 ovirt-4.2-centos-gluster312 glusterfs-api.x86_64 3.12.11-1.el7 ovirt-4.2-centos-gluster312 glusterfs-client-xlators.x86_64 3.12.11-1.el7 ovirt-4.2-centos-gluster312 glusterfs-fuse.x86_64 3.12.11-1.el7 ovirt-4.2-centos-gluster312 glusterfs-libs.x86_64 3.12.11-1.el7 ovirt-4.2-centos-gluster312 gnupg2.x86_64 2.0.22-5.el7_5 updates kernel.x86_64 3.10.0-862.9.1.el7 updates kernel-devel.x86_64 3.10.0-862.9.1.el7 updates kernel-headers.x86_64 3.10.0-862.9.1.el7 updates kernel-tools.x86_64 3.10.0-862.9.1.el7 updates kernel-tools-libs.x86_64 3.10.0-862.9.1.el7 updates python.x86_64 2.7.5-69.el7_5 updates python-libs.x86_64 2.7.5-69.el7_5 updates python-perf.x86_64 3.10.0-862.9.1.el7 updates [root@il-cp ~]# # yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm Loaded plugins: fastestmirror, versionlock ovirt-release42.rpm | 11 kB 00:00:00 Examining /var/tmp/yum-root-IU5WcC/ovirt-release42.rpm: ovirt-release42-4.2.4-1.el7.noarch /var/tmp/yum-root-IU5WcC/ovirt-release42.rpm: does not update installed package. Edward Clay Systems Administrator The Hut Group<http://www.thehutgroup.com/> Tel: Email: edward.clay(a)uk2group.com<mailto:edward.clay@uk2group.com> For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. Confidentiality Notice This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. Encryptions and Viruses Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail. Monitoring Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes. hgvyjuv

1 0

Upgrading HE and hosts; 4.1 to 4.2.4
by aduckers 23 Jul '18

23 Jul '18

It looks like there are several different pages describing the update process and I’m not sure which ones in particular apply in this case. I’ve got a cluster with 6 hosts, 3 of which can run the hosted engine. Would this be the correct procedure? https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-en… <https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-en…> And for Step 2 in that procedure, would this cover it? # yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm <http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm> # yum update “ovirt-*-setup*” # engine-setup And for Step 4 in that procedure, can that be done in the GUI alone or does yum need to be run from the CLI? Thanks

3 4

Hang tasks delete snapshot
by Marcelo Leandro 23 Jul '18

23 Jul '18

Hello, The few days I tried delete snapshot but the task not concluded yet. How I can stop this task? I Already try with taskcleaner.sh but dont had sucess. attached the ovirt and vdsm-spm logs. ovirt version. 4.1.9 Thanks.

3 8

Ovirt AD auth setup issue
by sarunn＠live.com 23 Jul '18

23 Jul '18

I need a help to resolve Ovirt AD auth setup issue. I have setup ovirt-engine-4.2 and I am trying to integrate with AD for user authentication. Using (ad.properties) I am able to bind to AD, however test login is failing with "Invalid credentials" LOG --- FINEST: message = 80090308: LdapErr: DSID-0C090400, comment: AcceptSecurityContext error, data 52e, v1db1 API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='abc.internal' result=CREDENTIALS_INCORRECT SEVERE Authn.Result code is: CREDENTIALS_INCORRECT ---- I confirm the credentials is correct.

1 0

isolated-privatevlan vdsm hook
by g.vasilopoulos＠uoc.gr 23 Jul '18

23 Jul '18

How does this filter work ? Do I have to set a custom property on the engine ? Should I add clean traffic on vnic profile and then add GATEWAY_MAC and IP ? is there a way to select it on a specific vm? I installed the hook on one hook restarted the engine put the host in maintenance restarted libvirt exited the host from maintenance. I put the host on maintenance removed the hook. Restarted the host. The message keeps popping up Now I have a message "Finished activating host" popping up a lot of times, maybe a 100 times.. Should I reinstall the specific host ?

2 3

Docker best practices
by Николаев Алексей 23 Jul '18

23 Jul '18

7 8

Cannot start VM due to no active snapshot.
by pwightm＠gmail.com 23 Jul '18

23 Jul '18

I've hit the issue described in: https://access.redhat.com/solutions/3393181 https://bugzilla.redhat.com/show_bug.cgi?id=1561052 I have one VM with three disks that cannot start. Logs indicate a null pointer exception when trying to locate the snapshot. I've verified in the engine db that no "Active" snapshot exists for the VM (this can also be seen in the WebUI). oVirt hosts and engine are both (now) on RHEL7.5. Not sure if this snapshot failed to create before the hosts were updated to 7.5 - the VM in question is a server that never gets shutdown but rather is migrated around while we perform host maintenance. oVirt: v4.2.1.7-1 Host: kernel: 3.10.0-862.9.1 KVM: 2.9.0-16 libvirt: libvirt-3.9.0-14.el7_5.6 VDSM: vdsm-4.20.27.1-1 The article just says to contact RH support, but I don't have a RHEV support agreement for my oVirt cluster. Anyone know how to recover this VM?

2 3

Gluster Deployment hangs on enabling or disabling chronyd service
by Sakhi Hadebe 23 Jul '18

23 Jul '18

Hi, Why is gluster deployment hangs on enabling or disabling the chronyd service? I have enabled passwordless ssh to access itself and other two nodes. What would be the solution to get it pass this stage? On Fri, Jul 13, 2018 at 10:41 AM, Sakhi Hadebe <sakhi(a)sanren.ac.za> wrote: > Hi, > > We are running the following setup: > > ovirt-engine: > - CentOS Linux release 7.5.1804 (Core) > - ovirt-engine-4.2.4.5-1.el7.noarch > > node (trying to add): > - CentOS Linux release 7.5.1804 (Core) > - vdsm-4.20.32-1.el7.x86_64 > > - ovirt-release42-4.2.4-1.el7.noarch > > > We successfully added the second node to the Cluster. Two nodes that have been successfully added are running ovirt-node-4.2.4. > > ovirt-node-ng-image-update-placeholder-4.2.4-1.el7.noarch > ovirt-node-ng-nodectl-4.2.0-0.20180626.0.el7.noarch > ovirt-provider-ovn-driver-1.2.11-1.el7.noarch > ovirt-release42-4.2.4-1.el7.noarch > ovirt-release-host-node-4.2.4-1.el7.noarch > > While adding a new node to our cluster the installations fail. > > I have attached a piece of engine.log and a full ovirt-host-deploy logs of the failing node from the engine. > Help would be very much appreciated. > > > -- > Regards, > Sakhi Hadebe > > -- Regards, Sakhi Hadebe Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za>

2 2

Ovirt stable version
by Lakhwinder Rai 22 Jul '18

22 Jul '18

I am trying to install ovirt Hosted engine.Could you please provide me with stable version (link). Thanks Lakhwinder Rai

3 2

Re: ERROR: integer out of range
by Martin Perina 22 Jul '18

22 Jul '18

Hi Filip, could you please share with us complete engine logs using SOS log collector [1] and, if possible, engine database dump, so we can investigate the issue? Also do you remember any steps you have performed before this issue happened? Thanks Martin [1] https://www.ovirt.org/documentation/admin-guide/chap-Utilities/#the-log-col… From: Filip Goll < > > biohazardik(a)gmail.com> > Date: Thu, 19 Jul 2018 at 13:19 > Subject: ERROR: integer out of range > To: <users-owner(a)ovirt.org> > > > Dear guru’s, > > Do you have any idea how to fix it? I can’t list any storage domain = no > data storage domain is up, so the datacenter is also down. > > Thats why I understand this error: > On startup any virtual machine this error: > > - Action failed due to database connection failure. Please check > connectivity to your Database server > > > Using: Software Version:4.2.4.5-1.el7 > > > PSQL: > engine=# select * from > > storage_domains_for_search; > ERROR: integer out of range > > In vdsm.log is everything, but on: > > engine.log: > 2018-07-19 11:36:51,166+02 ERROR [org.ovirt.engine.core.bll.SearchQuery] > (default task-251) [0d583ed2-fcbd-4d2d-b12c-0f0532a00a85] Query > 'SearchQuery' failed: StatementCallback; SQL [SELECT * FROM ((SELECT > distinct storage_domains_for_search.* FROM storage_domains_for_search ) > ORDER BY storage_name ASC ) as T1 OFFSET (1 -1) LIMIT 100]; ERROR: integer > out of range; nested exception is org.postgresql.util.PSQLException: > ERROR: integer out of range > 2018-07-19 11:36:51,166+02 ERROR [org.ovirt.engine.core.bll.SearchQuery] > (default task-251) [0d583ed2-fcbd-4d2d-b12c-0f0532a00a85] Exception: > org.springframework.dao.DataIntegrityViolationException: > StatementCallback; SQL [SELECT * FROM ((SELECT distinct > storage_domains_for_search.* FROM storage_domains_for_search ) ORDER BY > storage_name ASC ) as T1 OFFSET (1 -1) LIMIT 100]; ERROR: integer out of > range; nested exception is org.postgresql.util.PSQLException: ERROR: > integer out of range > at org.springframework.jdbc.support.SQLStateSQLExceptionTranslator > .doTranslate(SQLStateSQLExceptionTranslator.java:102) > [spring-jdbc.jar:4.3.9.RELEASE] > at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTr > anslator.translate(AbstractFallbackSQLExceptionTranslator.java:73) > [spring-jdbc.jar:4.3.9.RELEASE] > at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTr > anslator.translate(AbstractFallbackSQLExceptionTranslator.java:81) > [spring-jdbc.jar:4.3.9.RELEASE] > at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTr > anslator.translate(AbstractFallbackSQLExceptionTranslator.java:81) > [spring-jdbc.jar:4.3.9.RELEASE] > at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:419) > [spring-jdbc.jar:4.3.9.RELEASE] > at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:474) > [spring-jdbc.jar:4.3.9.RELEASE] > at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:484) > [spring-jdbc.jar:4.3.9.RELEASE] > at org.ovirt.engine.core.dao.StorageDomainDaoImpl.getAllWithQuery(StorageDomainDaoImpl.java:115) > [dal.jar:] > at org.ovirt.engine.core.bll.SearchQuery.genericSearch(SearchQuery.java:344) > [bll.jar:] > at org.ovirt.engine.core.bll.SearchQuery.searchStorageDomain(SearchQuery.java:393) > [bll.jar:] > at org.ovirt.engine.core.bll.SearchQuery.executeQueryCommand(SearchQuery.java:204) > [bll.jar:] > at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:106) > [bll.jar:] > at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) > [dal.jar:] > at org.ovirt.engine.core.bll.executor.DefaultBackendQueryExecutor.execute( > DefaultBackendQueryExecutor.java:14) [bll.jar:] > at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:538) > [bll.jar:] > at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:507) [bll.jar:] > at sun.reflect.GeneratedMethodAccessor82.invoke(Unknown Source) > [:1.8.0_171] > at sun.reflect.DelegatingMethodAccessorImpl.invoke( > DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_171] > at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_171] > at org.jboss.as.ee.component.ManagedReferenceMethodIntercep > tor.processInvocation(ManagedReferenceMethodInterceptor.java:52) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.InterceptorContext$Invocation. > proceed(InterceptorContext.java:509) > at org.jboss.as.weld.ejb.DelegatingInterceptorInvocationContext.proceed( > DelegatingInterceptorInvocationContext.java:92) [wildfly-weld-ejb-11.0.0. > Final.jar:11.0.0.Final] > at org.jboss.weld.interceptor.proxy.WeldInvocationContext. > interceptorChainCompleted(WeldInvocationContext.java:98) > [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] > at org.jboss.weld.interceptor.proxy.WeldInvocationContext. > proceed(WeldInvocationContext.java:117) [weld-core-impl-2.4.3.Final. > jar:2.4.3.Final] > at org.ovirt.engine.core.common.di.interceptor.LoggingInterceptor.apply(LoggingInterceptor.java:12) > [common.jar:] > at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source) > [:1.8.0_171] > at sun.reflect.DelegatingMethodAccessorImpl.invoke( > DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_171] > at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_171] > at org.jboss.weld.interceptor.reader.SimpleInterceptorInvocation$ > SimpleMethodInvocation.invoke(SimpleInterceptorInvocation.java:73) > [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] > at org.jboss.weld.interceptor.proxy.WeldInvocationContext.invokeNext(WeldInvocationContext.java:83) > [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] > at org.jboss.weld.interceptor.proxy.WeldInvocationContext. > proceed(WeldInvocationContext.java:115) [weld-core-impl-2.4.3.Final. > jar:2.4.3.Final] > at org.jboss.weld.bean.InterceptorImpl.intercept(InterceptorImpl.java:108) > [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] > at org.jboss.as.weld.ejb.DelegatingInterceptorInvocationContext.proceed( > DelegatingInterceptorInvocationContext.java:82) [wildfly-weld-ejb-11.0.0. > Final.jar:11.0.0.Final] > at org.jboss.as.weld.interceptors.EjbComponentInterceptorSupport > .delegateInterception(EjbComponentInterceptorSupport.java:60) > at org.jboss.as.weld.interceptors.Jsr299BindingsInterceptor. > delegateInterception(Jsr299BindingsInterceptor.java:76) > at org.jboss.as.weld.interceptors.Jsr299BindingsInterceptor. > doMethodInterception(Jsr299BindingsInterceptor.java:88) > at org.jboss.as.weld.interceptors.Jsr299BindingsInterceptor. > processInvocation(Jsr299BindingsInterceptor.java:101) > at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1. > processInvocation(UserInterceptorFactory.java:63) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.InterceptorContext$Invocation. > proceed(InterceptorContext.java:509) > at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerIntercepto > r.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] > at sun.reflect.GeneratedMethodAccessor78.invoke(Unknown Source) > [:1.8.0_171] > at sun.reflect.DelegatingMethodAccessorImpl.invoke( > DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_171] > at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_171] > at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor. > processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor. > processInvocation(ExecutionTimeInterceptor.java:43) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor. > processInvocation(ConcurrentContextInterceptor.java:45) > [wildfly-ee-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.InitialInterceptor.processInvocation( > InitialInterceptor.java:40) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.ChainedInterceptor.processInvocation( > ChainedInterceptor.java:53) > at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor > .processInvocation(ComponentDispatcherInterceptor.java:52) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAsso > ciationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:264) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:379) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:244) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.InterceptorContext$Invocation. > proceed(InterceptorContext.java:509) > at org.jboss.weld.ejb.AbstractEJBRequestScopeActivat > ionInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) > [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] > at org.jboss.as.weld.ejb.EjbRequestScopeActivationInter > ceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:89) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterc > eptor.processInvocation(CurrentInvocationContextInterceptor.java:41) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor. > processInvocation(WaitTimeInterceptor.java:47) [wildfly-ejb3-11.0.0.Final. > jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.security.SecurityContextInterceptor. > processInvocation(SecurityContextInterceptor.java:100) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.deployment.processors.StartupAwaitInterceptor. > processInvocation(StartupAwaitInterceptor.java:22) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1. > processInvocation(ShutDownInterceptorFactory.java:64) > [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor. > processInvocation(LoggingInterceptor.java:67) [wildfly-ejb3-11.0.0.Final. > jar:11.0.0.Final] > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.as.ee.component.NamespaceContextInterceptor. > processInvocation(NamespaceContextInterceptor.java:50) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation( > ContextClassLoaderInterceptor.java:60) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.InterceptorContext.run( > InterceptorContext.java:438) > at org.wildfly.security.manager.WildFlySecurityManager.doChecked( > WildFlySecurityManager.java:609) > at org.jboss.invocation.AccessCheckingInterceptor.processInvocation( > AccessCheckingInterceptor.java:57) > at org.jboss.invocation.InterceptorContext.proceed( > InterceptorContext.java:422) > at org.jboss.invocation.ChainedInterceptor.processInvocation( > ChainedInterceptor.java:53) > at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:198) > at org.jboss.as.ee.component.ViewDescription$1.processInvocation( > ViewDescription.java:185) > at org.jboss.as.ee.component.ProxyInvocationHandler.invoke( > ProxyInvocationHandler.java:81) > at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view4.runQuery(Unknown > Source) [common.jar:] > at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl. > runQuery(GenericApiGWTServiceImpl.java:90) > at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl. > runMultipleQueries(GenericApiGWTServiceImpl.java:121) > at sun.reflect.GeneratedMethodAccessor109.invoke(Unknown Source) > [:1.8.0_171] > at sun.reflect.DelegatingMethodAccessorImpl.invoke( > DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_171] > at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_171] > at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC. > java:587) > at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall( > RemoteServiceServlet.java:333) > at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall( > RemoteServiceServlet.java:303) > at com.google.gwt.user.server.rpc.RemoteServiceServlet.processPost( > RemoteServiceServlet.java:373) > at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost( > AbstractRemoteServiceServlet.java:62) > at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) > [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] > at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl. > service(GenericApiGWTServiceImpl.java:78) > at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) > [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] > at io.undertow.servlet.handlers.ServletHandler.handleRequest( > ServletHandler.java:85) > at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl. > doFilter(FilterHandler.java:129) > at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) > [utils.jar:] > at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) > at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl. > doFilter(FilterHandler.java:131) > at org.ovirt.engine.core.utils.servlet.CachingFilter. > doFilter(CachingFilter.java:133) [utils.jar:] > at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) > at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl. > doFilter(FilterHandler.java:131) > at org.ovirt.engine.core.branding.BrandingFilter. > doFilter(BrandingFilter.java:73) [branding.jar:] > at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) > at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl. > doFilter(FilterHandler.java:131) > at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:65) > [utils.jar:] > at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) > at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl. > doFilter(FilterHandler.java:131) > at io.undertow.servlet.handlers.FilterHandler.handleRequest( > FilterHandler.java:84) > at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler. > handleRequest(ServletSecurityRoleHandler.java:62) > at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest( > ServletDispatchingHandler.java:36) > at org.wildfly.extension.undertow.security.SecurityContextAssociationHand > ler.handleRequest(SecurityContextAssociationHandler.java:78) > at io.undertow.server.handlers.PredicateHandler.handleRequest( > PredicateHandler.java:43) > at io.undertow.servlet.handlers.security.SSLInformationAssociationHandl > er.handleRequest(SSLInformationAssociationHandler.java:131) > at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandl > er.handleRequest(ServletAuthenticationCallHandler.java:57) > at io.undertow.server.handlers.PredicateHandler.handleRequest( > PredicateHandler.java:43) > at io.undertow.security.handlers.AuthenticationConstraintHandle > r.handleRequest(AuthenticationConstraintHandler.java:53) > at io.undertow.security.handlers.AbstractConfidentialityHandler > .handleRequest(AbstractConfidentialityHandler.java:46) > at io.undertow.servlet.handlers.security.ServletConfidentialityConstrai > ntHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) > at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandl > er.handleRequest(ServletSecurityConstraintHandler.java:59) > at io.undertow.security.handlers.AuthenticationMechanismsHandle > r.handleRequest(AuthenticationMechanismsHandler.java:60) > at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHand > ler.handleRequest(CachedAuthenticatedSessionHandler.java:77) > at io.undertow.security.handlers.NotificationReceiverHandler. > handleRequest(NotificationReceiverHandler.java:50) > at io.undertow.security.handlers.AbstractSecurityContextAssocia > tionHandler.handleRequest(AbstractSecurityContextAssocia > tionHandler.java:43) > at io.undertow.server.handlers.PredicateHandler.handleRequest( > PredicateHandler.java:43) > at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler. > handleRequest(JACCContextIdHandler.java:61) > at io.undertow.server.handlers.PredicateHandler.handleRequest( > PredicateHandler.java:43) > at io.undertow.server.handlers.PredicateHandler.handleRequest( > PredicateHandler.java:43) > at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest( > ServletInitialHandler.java:292) > at io.undertow.servlet.handlers.ServletInitialHandler.access$ > 100(ServletInitialHandler.java:81) > at io.undertow.servlet.handlers.ServletInitialHandler$2.call( > ServletInitialHandler.java:138) > at io.undertow.servlet.handlers.ServletInitialHandler$2.call( > ServletInitialHandler.java:135) > at io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call( > ServletRequestContextThreadSetupAction.java:48) > at io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call( > ContextClassLoaderSetupAction.java:43) > at org.wildfly.extension.undertow.security.SecurityContextThreadSetupActi > on.lambda$create$0(SecurityContextThreadSetupAction.java:105) > at org.wildfly.extension.undertow.deployment. > UndertowDeploymentInfoService$UndertowThreadSetupAction.lambda$create$0( > UndertowDeploymentInfoService.java:1508) > at org.wildfly.extension.undertow.deployment. > UndertowDeploymentInfoService$UndertowThreadSetupAction.lambda$create$0( > UndertowDeploymentInfoService.java:1508) > at org.wildfly.extension.undertow.deployment. > UndertowDeploymentInfoService$UndertowThreadSetupAction.lambda$create$0( > UndertowDeploymentInfoService.java:1508) > at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest( > ServletInitialHandler.java:272) > at io.undertow.servlet.handlers.ServletInitialHandler.access$ > 000(ServletInitialHandler.java:81) > at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest( > ServletInitialHandler.java:104) > at io.undertow.server.Connectors.executeRootHandler(Connectors.java:326) > at io.undertow.server.HttpServerExchange$1.run( > HttpServerExchange.java:812) > at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) > [rt.jar:1.8.0_171] > at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) > [rt.jar:1.8.0_171] > at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_171] > Caused by: org.postgresql.util.PSQLException: ERROR: integer out of range > at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse( > QueryExecutorImpl.java:2157) > at org.postgresql.core.v3.QueryExecutorImpl.processResults( > QueryExecutorImpl.java:1886) > at org.postgresql.core.v3.QueryExecutorImpl.execute( > QueryExecutorImpl.java:255) > at org.postgresql.jdbc2.AbstractJdbc2Statement.execute( > AbstractJdbc2Statement.java:555) > at org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags( > AbstractJdbc2Statement.java:403) > at org.postgresql.jdbc2.AbstractJdbc2Statement.executeQuery( > AbstractJdbc2Statement.java:283) > at org.jboss.jca.adapters.jdbc.WrappedStatement.executeQuery( > WrappedStatement.java:397) > at org.springframework.jdbc.core.JdbcTemplate$1QueryStatementCallback. > doInStatement(JdbcTemplate.java:458) [spring-jdbc.jar:4.3.9.RELEASE] > at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:408) > [spring-jdbc.jar:4.3.9.RELEASE] > ... 151 more > > -- Martin Perina Associate Manager, Software Engineering Red Hat Czech s.r.o.

3 5

Re: More USB device redirection
by Arik Hadas 21 Jul '18

21 Jul '18

בתאריך שבת, 21 ביולי 2018, 01:21, מאת Shi Qilin ‏<shiqilin(a)outlook.com>: > Thanks，this is successful > Sure > 在 2018年7月20日 at 16:21:36, Arik Hadas (ahadas(a)redhat.com) 写到: > >> >> >> On Fri, Jul 20, 2018 at 5:28 AM <yunsur.shi(a)gmail.com> wrote: >> >>> We have more USB devices redir (There are 8)，But oVirt supports only 6. >>> How should I configure it. >>> >>> /etc/engine-config/engine-config.properties >>> NumberOfUSBSlots.validValues=0..6 >>> >>> This 0..6 modify 0..8 >>> >>> engine-config -s NumberOfUSBSlots=8 >>> engine-config -g NumberOfUSBSlots >>> NumberOfUSBSlots: 8 version: general >>> >>> But No entry into force >>> Should I do？ >>> >> >> To apply this change you'll need to restart the engine, then disable the >> USB support for that VM, and then enable the USB support again. >> >> >>> Thanks >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/WMBJJAD5H7IAQ… >>> >> > -- > shiqilin(a)outlook.com >

1 0

Ovirt 3:6 to 4:2 migration
by techieim 21 Jul '18

21 Jul '18

Hello Team Ovirt, We are running Ovirt3.8 version in our prod, we want to upgrade to 3.8 to 4.2. At present we have 2 (hyp A & hyp B)physical host ovirt 3.8 is running with self hosted engine with data domain and iso one cluster and data center. What we were thing do this migration in following fashion. Plan A. 1. Attach export domain present infra. 2. Take backup all of running vm as export. 3. Detach export domain 4. Detach hyp B from cluster and data center 5. Install fresh ovirt 4.2 iso on hyp B 6. Install self hosted engine 7. Attach Data Domain 8. Attach Export Domain which was use in ovirt 3.8 9. Import all vm's from there to new ovirt 4.2 10. Once all the vm's got up and running poweroff hyp A 11. Install fresh ovirt 4.2 iso on hyp A and attach cluster. Plan B. 1. Attach export domain present infra. 2. Take backup all of running vm as export. 3. Detach export domain 4. Detach hyp B from cluster and data center 5. Install fresh ovirt 4.2 iso on hyp B 6. Install self hosted engine 7. Attach Data Domain 8. Export from ovirt 3.8 to ovirt 4.2 9. Once all the vm's got up and running poweroff hyp A 10. Install fresh ovirt 4.2 iso on hyp A and attach cluster. Thank a ton in advance we may be wrong with above step help us to win this migration. Regards Techieim

1 0

Cant create ISCSI data domain
by tehnic＠take3.ro 20 Jul '18

20 Jul '18

Hello all, i try to create a new data domain on ISCSI storage following this documentation: https://www.ovirt.org/documentation/admin-guide/chap-Storage/ Discovery of ISCSI target is working but after logging in to the target no LUNs are found or displayed, so i cant finish the procedure. On the SPM i see an ISCSI session, and LUN 1 is attached as /dev/sdc. The ISCSI system is a FreeNAS installation and im running ovirt 4.2. Any suggestion how to solve this problem? Regards, Robert

2 2

Ovf from vm.initialization.configuration.data
by Carlos Rodrigues 20 Jul '18

20 Jul '18

Hello, I'm working on development of script to backup and restore ovirt VMs. I saw some examples from sdk (https://github.com/oVirt/ovirt-engine-sdk /tree/master/sdk/examples) to backup and restore VMs, but for backup ovf VM i'm using the vm.initialization.configuration.data and this ovf it keeps the snapshots information and don't have disks ids reference. I would like to known if we have some method to get the ovf with disks ids? Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110

1 0

Failed to Activated Host
by carl langlois 20 Jul '18

20 Jul '18

Hi Today i had plan to start upgrading my installation to the latest 4.2. As i was already on a 4.2.x version i have figured it will be easy .. well.guess what i have having trouble re-activating one of the freshly upgraded host. So here is the resume. My setup have 3 hosts that are also part of a gluster pool. Those are the original host that was use to setup the HA engine with glusterfs. One of the 3 host is only used for arbiter and can also run the engine. But nothing else can run on it because it is a fairly small machine. I have also 6 others hosts for running vms that are not part of the gluster pool. So first thing i did to upgrade is set the global maintenance. Update the Engine/restart the engine and remove global maintenance.. that went without a glitch. Next i choose the arbiter for the first machine to upgrade. Then set the machine to maintenance run the upgrade and reboot the host. That went also without a glicth. Now here is the glitchy part. When i try to reactivate the host i got a strange error with a gluster peer command that failed on a host that is not in the gluster peer list. Here is the two errors i had. *"Gluster command [gluster peer probe ovhost3] failed on server sfmo5002ov74."* *"Add Host failed error: ovhost3 is either already part of another cluster of having volumes configured return code: 3"* One thing i do not understand is the sfmo5002ov74 is not part of the gluster pool. It does not provide any bricks to the system. Now i am not sure what to look for. I have stop the upgrade process until i figure out the issue. Any hints would be appreciated. Thanks Carl

2 3

More USB device redirection
by yunsur.shi＠gmail.com 20 Jul '18

20 Jul '18

We have more USB devices redir (There are 8)，But oVirt supports only 6. How should I configure it. /etc/engine-config/engine-config.properties NumberOfUSBSlots.validValues=0..6 This 0..6 modify 0..8 engine-config -s NumberOfUSBSlots=8 engine-config -g NumberOfUSBSlots NumberOfUSBSlots: 8 version: general But No entry into force Should I do？ Thanks

2 1

OVIRT 4.2: MountError on Posix Compliant FS
by jtorres＠bsc.es 19 Jul '18

19 Jul '18

Hi all, I've deployed the ovirt Version 4.2.4.5-1.el7 on a small cluster and I'm trying to use as datastorage domain a configured Spectrum Scale (GPFS) distributed filesystem for test it. I've completed the configuration of the storage, and the filesystem defined are correctly mounted on the client hosts as we can see: gpfs_kvm gpfs 233T 288M 233T 1% /gpfs/kvm gpfs_fast gpfs 8.8T 5.2G 8.8T 1% /gpfs/fast The content output of the mount comand is: gpfs_kvm on /gpfs/kvm type gpfs (rw,relatime) gpfs_fast on /gpfs/fast type gpfs (rw,relatime) I can write and read to the mounted filesystem correctly, but when I try to add the local mounted filesystem I encountered some errors related to the mounting process of the storage. The parameters passed to add new storage domain are: Data Center: Default (V4) Name: gpfs_kvm Description: VM data on GPFS Domain Function: Data Storage Type: Posix Compliant FS Host to Use: kvm1c01 Path: /gpfs/kvm VFS Type: gpfs Mount Options: rw, relatime The ovirt error that I obtained is: Error while executing action Add Storage Connection: Problem while trying to mount target On the /var/log/vdsm/vdsm.log I can see: 2018-07-05 09:07:43,400+0200 INFO (jsonrpc/0) [vdsm.api] START connectStorageServer(domType=6, spUUID=u'00000000-0000-0000-0000-000000000000', conList=[{u'mnt_options': u'rw,relatime', u'id': u'00000000-0000-0000-0000-000000000000', u'connection': u'/gpfs/kvm', u'iqn': u'', u'user': u'', u'tpgt': u'1', u'vfs_type': u'gpfs', u'password': '********', u'port': u''}], options=None) from=::ffff:10.2.1.254,43908, flow_id=498668a0-a240-469f-ac33-f8c7bdeb481f, task_id=857460ed-5f0e-4bc6-ba54-e8f2c72e9ac2 (api:46) 2018-07-05 09:07:43,403+0200 INFO (jsonrpc/0) [storage.StorageServer.MountConnection] Creating directory u'/rhev/data-center/mnt/_gpfs_kvm' (storageServer:167) 2018-07-05 09:07:43,404+0200 INFO (jsonrpc/0) [storage.fileUtils] Creating directory: /rhev/data-center/mnt/_gpfs_kvm mode: None (fileUtils:197) 2018-07-05 09:07:43,404+0200 INFO (jsonrpc/0) [storage.Mount] mounting /gpfs/kvm at /rhev/data-center/mnt/_gpfs_kvm (mount:204) MountError: (32, ';mount: wrong fs type, bad option, bad superblock on /gpfs/kvm,\n missing codepage or helper program, or other error\n\n In some cases useful info is found in syslog - try\n dmesg | tail or so.\n') I know, that from previous versions on the GPFS implementation, they removed the device on /dev, due to incompatibilities with systemd. I don't know if this change affect the ovirt mounting process. Can you help me to add this filesystem to the ovirt environment? The parameters that I used previously are ok? Or i need to do some modification? Its possible that the process fails because i dont have a device related to the gpfs filesystems on /dev? Can we apply some kind of workaround to mount manually the filesystem to the ovirt environment? Ex. create the dir /rhev/data-center/mnt/_gpfs_kvm manually and then mount the /gpfs/kvm over this? It's posible to modify the code to bypass some comprobations or something? Reading the available documentation over Internet I find that ovirt was compatible with this fs (gpfs) implementation, because it's POSIX Compliant, this is a main reason for test it in our cluster. It remains compatible on the actual versions? Or maybe there are changes that brokes this integration? Many thanks for all in advance! Kind regards!

4 7

Re: HE + Gluster : Engine corrupted?
by Krutika Dhananjay 19 Jul '18

19 Jul '18

Hi, So it seems some of the files in the volume have mismatching gfids. I see the following logs from 15th June, ~8pm EDT: <snip> ... ... [2018-06-16 04:00:10.264690] E [MSGID: 108008] [afr-self-heal-common.c:335:afr_gfid_split_brain_source] 0-engine-replicate-0: Gfid mismatch detected for <gfid:941edf0c-d363-488e-a333-d12320f96480>/hosted-engine.lockspace>, 6bbe6097-8520-4a61-971e-6e30c2ee0abe on engine-client-2 and ef21a706-41cf-4519-8659-87ecde4bbfbf on engine-client-0. [2018-06-16 04:00:10.265861] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4411: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) [2018-06-16 04:00:11.522600] E [MSGID: 108008] [afr-self-heal-common.c:212:afr_gfid_split_brain_source] 0-engine-replicate-0: All the bricks should be up to resolve the gfid split barin [2018-06-16 04:00:11.522632] E [MSGID: 108008] [afr-self-heal-common.c:335:afr_gfid_split_brain_source] 0-engine-replicate-0: Gfid mismatch detected for <gfid:941edf0c-d363-488e-a333-d12320f96480>/hosted-engine.lockspace>, 6bbe6097-8520-4a61-971e-6e30c2ee0abe on engine-client-2 and ef21a706-41cf-4519-8659-87ecde4bbfbf on engine-client-0. [2018-06-16 04:00:11.523750] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4493: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) [2018-06-16 04:00:12.864393] E [MSGID: 108008] [afr-self-heal-common.c:212:afr_gfid_split_brain_source] 0-engine-replicate-0: All the bricks should be up to resolve the gfid split barin [2018-06-16 04:00:12.864426] E [MSGID: 108008] [afr-self-heal-common.c:335:afr_gfid_split_brain_source] 0-engine-replicate-0: Gfid mismatch detected for <gfid:941edf0c-d363-488e-a333-d12320f96480>/hosted-engine.lockspace>, 6bbe6097-8520-4a61-971e-6e30c2ee0abe on engine-client-2 and ef21a706-41cf-4519-8659-87ecde4bbfbf on engine-client-0. [2018-06-16 04:00:12.865392] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4575: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) [2018-06-16 04:00:18.716007] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4657: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) [2018-06-16 04:00:20.553365] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4739: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) [2018-06-16 04:00:21.771698] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4821: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) [2018-06-16 04:00:23.871647] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4906: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) [2018-06-16 04:00:25.034780] W [fuse-bridge.c:540:fuse_entry_cbk] 0-glusterfs-fuse: 4987: LOOKUP() /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/ha_agent/hosted-engine.lockspace => -1 (Input/output error) ... ... </snip> Adding Ravi who works on replicate component to hep resolve the mismatches. -Krutika On Mon, Jul 2, 2018 at 12:27 PM, Krutika Dhananjay <kdhananj(a)redhat.com> wrote: > Hi, > > Sorry, I was out sick on Friday. I am looking into the logs. Will get back > to you in some time. > > -Krutika > > On Fri, Jun 29, 2018 at 7:47 PM, Hanson Turner <hanson(a)andrewswireless.net > > wrote: > >> Hi Krutika, >> >> Did you need any other logs? >> >> >> Thanks, >> >> Hanson >> >> On 06/27/2018 02:04 PM, Hanson Turner wrote: >> >> Hi Krutika, >> >> Looking at the email spams, it looks like it started at 8:04PM EDT on Jun >> 15 2018. >> >> From my memory, I think the cluster was working fine until sometime that >> night. Somewhere between midnight and the next (Saturday) morning, the >> engine crashed and all vm's stopped. >> >> I do have nightly backups that ran every night, using the engine-backup >> command. Looks like my last valid backup was 2018-06-15. >> >> I've included all logs I think might be of use. Please forgive the use of >> 7zip, as the raw logs took 50mb which is greater than my attachment limit. >> >> I think the just of what happened, is we had a downed node for a period >> of time. Earlier that day, the node was brought back into service. Later >> that night or early the next morning, the engine was gone and hopping from >> node to node. >> >> I have tried to mount the engine's hdd file to see if I could fix it. >> There are a few corrupted partitions, and those are xfs formatted. Trying >> to mount gives me issues about needing repaired, trying to repair gives me >> issues about needing something cleaned first. I cannot remember exactly >> what it was, but it wanted me to run a command that ended -L to clear out >> the logs. I said no way and have left the engine vm in a powered down >> state, as well as the cluster in global maintenance. >> >> I can see no sign of the vm booting, (ie no networking) except for what >> I've described earlier in the VNC session. >> >> >> Thanks, >> >> Hanson >> >> >> >> On 06/27/2018 12:04 PM, Krutika Dhananjay wrote: >> >> Yeah, complete logs would help. Also let me know when you saw this issue >> - data and approx time (do specify the timezone as well). >> >> -Krutika >> >> On Wed, Jun 27, 2018 at 7:00 PM, Hanson Turner < >> hanson(a)andrewswireless.net> wrote: >> >>> #more rhev-data-center-mnt-glusterSD-ovirtnode1.abcxyzdomains.net\ >>> :_engine.log >>> [2018-06-24 07:39:12.161323] I [glusterfsd-mgmt.c:1888:mgmt_getspec_cbk] >>> 0-glusterfs: No change in volfile,continuing >>> >>> # more gluster_bricks-engine-engine.log >>> [2018-06-24 07:39:14.194222] I [glusterfsd-mgmt.c:1888:mgmt_getspec_cbk] >>> 0-glusterfs: No change in volfile,continuing >>> [2018-06-24 19:58:28.608469] E [MSGID: 101063] >>> [event-epoll.c:551:event_dispatch_epoll_handler] 0-epoll: stale fd >>> found on idx=12, gen=1, events=1, slot->gen=3 >>> [2018-06-25 14:24:19.716822] I [addr.c:55:compare_addr_and_update] >>> 0-/gluster_bricks/engine/engine: allowed = "*", received addr = >>> "192.168.0.57" >>> [2018-06-25 14:24:19.716868] I [MSGID: 115029] >>> [server-handshake.c:793:server_setvolume] 0-engine-server: accepted >>> client from CTX_ID:79b9d5b7-0bbb-4d67-87cf-11e27dfb6c1d-GRAPH_ID:0-PID:9 >>> 901-HOST:sp3Kali-PC_NAME:engine-client-0-RECON_NO:-0 (version: 4.0.2) >>> [2018-06-25 14:45:35.061350] I [MSGID: 115036] >>> [server.c:527:server_rpc_notify] 0-engine-server: disconnecting >>> connection from CTX_ID:79b9d5b7-0bbb-4d67-87cf >>> -11e27dfb6c1d-GRAPH_ID:0-PID:9901-HOST:sp3Kali-PC_NAME:engin >>> e-client-0-RECON_NO:-0 >>> [2018-06-25 14:45:35.061415] I [MSGID: 115013] >>> [server-helpers.c:289:do_fd_cleanup] 0-engine-server: fd cleanup on >>> /c65e03f0-d553-4d5d-ba4f-9d378c153b9b/images/82cde976-0650-4 >>> db9-9487-e2b52ffe25ee/e53806d9-3de5-4b26-aadc-157d745a9e0a >>> [2018-06-25 14:45:35.062290] I [MSGID: 101055] >>> [client_t.c:443:gf_client_unref] 0-engine-server: Shutting down >>> connection CTX_ID:79b9d5b7-0bbb-4d67-87cf-11e27dfb6c1d-GRAPH_ID:0-PID:9 >>> 901-HOST:sp3Kali-PC_NAME:engine-client-0-RECON_NO:-0 >>> [2018-06-25 14:46:34.284195] I [MSGID: 115036] >>> [server.c:527:server_rpc_notify] 0-engine-server: disconnecting >>> connection from CTX_ID:13e88614-31e8-4618-9f7f >>> -067750f5971e-GRAPH_ID:0-PID:2615-HOST:workbench-PC_NAME:eng >>> ine-client-0-RECON_NO:-0 >>> [2018-06-25 14:46:34.284546] I [MSGID: 101055] >>> [client_t.c:443:gf_client_unref] 0-engine-server: Shutting down >>> connection CTX_ID:13e88614-31e8-4618-9f7f-067750f5971e-GRAPH_ID:0-PID:2 >>> 615-HOST:workbench-PC_NAME:engine-client-0-RECON_NO:-0 >>> >>> >>> # gluster volume info engine >>> >>> Volume Name: engine >>> Type: Replicate >>> Volume ID: c8dc1b04-bc25-4e97-81bb-4d94929918b1 >>> Status: Started >>> Snapshot Count: 0 >>> Number of Bricks: 1 x 3 = 3 >>> Transport-type: tcp >>> Bricks: >>> Brick1: ovirtnode1.core.abcxyzdomains.net:/gluster_bricks/engine/engine >>> Brick2: ovirtnode3.core.abcxyzdomains.net:/gluster_bricks/engine/engine >>> Brick3: ovirtnode4.core.abcxyzdomains.net:/gluster_bricks/engine/engine >>> Options Reconfigured: >>> performance.strict-write-ordering: off >>> server.event-threads: 4 >>> client.event-threads: 4 >>> features.shard-block-size: 512MB >>> cluster.granular-entry-heal: enable >>> performance.strict-o-direct: off >>> network.ping-timeout: 30 >>> storage.owner-gid: 36 >>> storage.owner-uid: 36 >>> user.cifs: off >>> features.shard: on >>> cluster.shd-wait-qlength: 10000 >>> cluster.shd-max-threads: 8 >>> cluster.locking-scheme: granular >>> cluster.data-self-heal-algorithm: full >>> cluster.server-quorum-type: server >>> cluster.quorum-type: auto >>> cluster.eager-lock: enable >>> network.remote-dio: off >>> performance.low-prio-threads: 32 >>> performance.io-cache: off >>> performance.read-ahead: off >>> performance.quick-read: off >>> transport.address-family: inet >>> nfs.disable: on >>> performance.client-io-threads: off >>> >>> # gluster --version >>> glusterfs 3.12.9 >>> Repository revision: git://git.gluster.org/glusterfs.git >>> Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> >>> <https://www.gluster.org/> >>> GlusterFS comes with ABSOLUTELY NO WARRANTY. >>> It is licensed to you under your choice of the GNU Lesser >>> General Public License, version 3 or any later version (LGPLv3 >>> or later), or the GNU General Public License, version 2 (GPLv2), >>> in all cases as published by the Free Software Foundation. >>> >>> Let me know if you want log further back, I can attach and send directly >>> to you. >>> >>> Thanks, >>> >>> Hanson >>> >>> >>> >>> On 06/26/2018 12:30 AM, Krutika Dhananjay wrote: >>> >>> Could you share the gluster mount and brick logs? You'll find them >>> under /var/log/glusterfs. >>> Also, what's the version of gluster you're using? >>> Also, output of `gluster volume info <ENGINE_VOLNAME>`? >>> >>> -Krutika >>> >>> On Thu, Jun 21, 2018 at 9:50 AM, Sahina Bose <sabose(a)redhat.com> wrote: >>> >>>> >>>> >>>> On Wed, Jun 20, 2018 at 11:33 PM, Hanson Turner < >>>> hanson(a)andrewswireless.net> wrote: >>>> >>>>> Hi Benny, >>>>> >>>>> Who should I be reaching out to for help with a gluster based hosted >>>>> engine corruption? >>>>> >>>> >>>> >>>> Krutika, could you help? >>>> >>>> >>>>> >>>>> --== Host 1 status ==-- >>>>> >>>>> conf_on_shared_storage : True >>>>> Status up-to-date : True >>>>> Hostname : ovirtnode1.abcxyzdomains.net >>>>> Host ID : 1 >>>>> Engine status : {"reason": "failed liveliness >>>>> check", "health": "bad", "vm": "up", "detail": "Up"} >>>>> Score : 3400 >>>>> stopped : False >>>>> Local maintenance : False >>>>> crc32 : 92254a68 >>>>> local_conf_timestamp : 115910 >>>>> Host timestamp : 115910 >>>>> Extra metadata (valid at timestamp): >>>>> metadata_parse_version=1 >>>>> metadata_feature_version=1 >>>>> timestamp=115910 (Mon Jun 18 09:43:20 2018) >>>>> host-id=1 >>>>> score=3400 >>>>> vm_conf_refresh_time=115910 (Mon Jun 18 09:43:20 2018) >>>>> conf_on_shared_storage=True >>>>> maintenance=False >>>>> state=GlobalMaintenance >>>>> stopped=False >>>>> >>>>> >>>>> My when I VNC into my HE, All I get is: >>>>> Probing EDD (edd=off to disable)... ok >>>>> >>>>> >>>>> So, that's why it's failing the liveliness check... I cannot get the >>>>> screen on HE to change short of ctl-alt-del which will reboot the HE. >>>>> I do have backups for the HE that are/were run on a nightly basis. >>>>> >>>>> If the cluster was left alone, the HE vm would bounce from machine to >>>>> machine trying to boot. This is why the cluster is in maintenance mode. >>>>> One of the nodes was down for a period of time and brought back, >>>>> sometime through the night, which is when the automated backup kicks, the >>>>> HE started bouncing around. Got nearly 1000 emails. >>>>> >>>>> This seems to be the same error (but may not be the same cause) as >>>>> listed here: >>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1569827 >>>>> >>>>> Thanks, >>>>> >>>>> Hanson >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list -- users(a)ovirt.org >>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>> oVirt Code of Conduct: https://www.ovirt.org/communit >>>>> y/about/community-guidelines/ >>>>> List Archives: https://lists.ovirt.org/archiv >>>>> es/list/users(a)ovirt.org/message/3NLA2URX3KN44FGFUVV4N5EJBPICABHH/ >>>>> >>>>> >>>> >>> >>> >> >> >> >

3 3

Ovirt system crash when starting VM with Quadro GPU
by Wesley Stewart 19 Jul '18

19 Jul '18

I have recently been using an old Radeon R9 270X lying around without issue, until this card seemed to have kicked the bucket. I had an Nvidia Quadro P2000 lying around I thought I would try. After installing it into my system, it showed up in the PCI device as anticipated. I based both devices to my Windows 10 guest. It shows up a a GP106GL and a separate audio component. The same thing that happened with the AMD Radeon Card. The events just shows the VM's being terminated without giving a reason, and I am hoping for some guidance. Currently using a single node setup, running ovirt 4.2.3. Any ideas or places to check would be much appreciated!

1 1

ovirt upgrade 4.1 - 4.2 fail
by Альбов Леонид 18 Jul '18

18 Jul '18

Hello! After upgrade engin from 4.1 to 4.2 all Host in status Activate or Non Operational. Error Message: VDSM cluster-nodeXX command GetCapabilitiesAsyncVDS failed: General SSLEngine problem Need help! (Centos 7) engine.log 2018-07-18 17:37:46,903+03 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to cluster-node11.office.vliga/10.252.252.211 2018-07-18 17:37:46,905+03 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2018-07-18 17:37:46,906+03 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-5) [] Unable to RefreshCapabilities: VDSNetworkException: VDSGenericException: VDSNetworkException: General SSLEngine problem 2018-07-18 17:37:47,744+03 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to cluster-node10.office.vliga/10.252.252.210 2018-07-18 17:37:47,747+03 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2018-07-18 17:37:47,747+03 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-95) [] Unable to RefreshCapabilities: VDSNetworkException: VDSGenericException: VDSNetworkException: General SSLEngine problem 2018-07-18 17:37:52,814+03 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to cluster-node6.office.vliga/10.252.252.206 2018-07-18 17:37:52,816+03 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2018-07-18 17:37:52,816+03 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-55) [] Unable to RefreshCapabilities: VDSNetworkException: VDSGenericException: VDSNetworkException: General SSLEngine problem 2018-07-18 17:37:59,513+03 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to cluster-node6.office.vliga/10.252.252.206 2018-07-18 17:37:59,514+03 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2018-07-18 17:37:59,517+03 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to cluster-node10.office.vliga/10.252.252.210 2018-07-18 17:37:59,519+03 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem -- Леонид Альбов

1 0

Python-SDK4: Check snapshot deletion result?
by nicolas＠devels.es 18 Jul '18

18 Jul '18

Hi, We're using ovirt-engine-sdk-python 4.1.6 on oVirt 4.1.9, currently we're trying to delete some snapshots via a script like this: sys_serv = conn.system_service() vms_service = sys_serv.vms_service() vm_service = vms_service.vm_service(vmid) snaps_service = vm_service.snapshots_service() snaps_service.service('SNAPSHOT-ID').remove() This works, mostly... however, sometimes the deletion fails: Failed to delete snapshot 'snapshot name' for VM 'vm'. Is it currently possible to know via Python-SDK that the deletion actually failed? I know I can check the state of a snapshot, but I'd like to check the result of the task. Is that possible somehow? Thanks.

3 5